{
 "schema": "aic-tdp-library/1",
 "title": "Submarine legacy technical data library",
 "generated": "2026-11-19",
 "totals": {
  "documents": 564,
  "pages": 7640,
  "solids": 21941,
  "dimensions": 259691,
  "ready": 486
 },
 "documents": [
  {
   "id": "MIL-DTL-1222J",
   "slug": "mil-dtl-1222j",
   "title": "Studs, bolts, screws and nuts for applications where A high degree of reliability is required; general specification for",
   "class": "Columbia",
   "folder": "Columbia/MIL-DTL-1222J Studs, bolts",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 51,
   "solids": 148,
   "dimensions": 920,
   "dimensions_met": 918,
   "kind": "Detail specification",
   "dated": "08 December 2000",
   "status": "Active, 8 December 2000",
   "newest": "Revision J, 8 December 2000",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 35,
   "by_class": {
    "Columbia": 2,
    "Virginia": 6,
    "Los Angeles": 10,
    "Ohio": 5,
    "Seawolf": 13
   },
   "stock_examples": [
    "5305-01-714-2473, screw, cap, hexagon head, M1222RN8C232GHLN (Columbia)",
    "5305-01-714-2485, screw, cap, hexagon head, M1222RN12C244GHLN (Columbia)",
    "5306-01-359-4389, bolt, machine, M1222RW8C236NALN (Los Angeles, Virginia)",
    "5305-01-556-2940, screw, cap, socket head, M1222SN6C214NDLN (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-1222J package.pdf",
    "scan": "MIL-DTL-1222J legacy scan.pdf",
    "clean": "MIL-DTL-1222J clean copy.pdf",
    "record": "MIL-DTL-1222J validation record.pdf",
    "sheet": "MIL-DTL-1222J 3D model.pdf",
    "parts": "MIL-DTL-1222J parts list.pdf",
    "inspection": "MIL-DTL-1222J inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 37",
   "pictures": {
    "iso": "Models/views/MIL-DTL-1222_hex_slotted_nut_type_V_washer_faced_2-1_4-freecad.png",
    "pair": "Models/views/MIL-DTL-1222_hex_slotted_nut_type_V_washer_faced_2-1_4-pair.png",
    "record": "Models/views/MIL-DTL-1222_hex_slotted_nut_type_V_washer_faced_2-1_4-record.png",
    "front": "Models/views/MIL-DTL-1222_hex_slotted_nut_type_V_washer_faced_2-1_4-front.png",
    "top": "Models/views/MIL-DTL-1222_hex_slotted_nut_type_V_washer_faced_2-1_4-top.png",
    "right": "Models/views/MIL-DTL-1222_hex_slotted_nut_type_V_washer_faced_2-1_4-right.png",
    "cut": "Models/views/MIL-DTL-1222_hex_slotted_nut_type_V_washer_faced_2-1_4-cut.png"
   },
   "shown_part": "MIL-DTL-1222 hex slotted nut type V washer faced 2-1/4",
   "application": "FreeCAD 1.1.4",
   "modeled": "148 solids from tables VI to X: 108 double-end studs of types I, II and III, one for each row and body-diameter column of table VI at one representative length; 4 type I hex cap screws of 3-1/4 to 4 inches with washer face, top chamfer and fillet; and 36 type I hex, type II hex jam and type V hex slotted nuts of 1-3/4 to 3 inches, each washer faced and chamfered; every thread is a plain cylinder or bore at its basic major diameter.",
   "not_modeled": [
    "The document lists no stud or screw lengths (they are ordered by appendix field 7), so each stud size is built 6 times its nominal size long and each cap screw 4 times, rounded up to a quarter inch; other lengths are not built.",
    "Thread form, pitch, class and runout, including the class 5 interference-fit stud end, the 2-1/2 imperfect threads at the stud thread ends, and the thread modifications for coatings (3.9.7).",
    "The stud end chamfer of 45 to 50 degrees from 1/64 to 1/32 below the thread root diameter (table VII note 4), whose root diameter is set by ASME B1.1 and B1.12, not by this document; the nut end chamfer the figure shows without a dimension; and the rounded or chamfered ends of studs too short for full thread lengths (note 1). Stud ends are square.",
    "Hex cap screw thread length, point, length tolerance, washer face diameter and top chamfer circle, which note 2 of table VIII leaves to ASME B18.2.1, and the swell or fin under the head of note 3: the shank is one cylinder at the body diameter from the fillet to the end.",
    "Studs of type IV and studs with fine threads (table VI gives body diameters for UNC and 8UN nut ends only); hex cap screws of 1/4 to 3 inches, bolts, socket head cap screws, heavy hex nuts and nuts under 1-3/4 inches, whose dimensions 3.9.3 to 3.9.6 take from ASME B18.2.1, B18.2.2, B18.2.6 and B18.3.",
    "Straightness (3.9.2.3), the countersink of nut threads, marking, materials, coatings, locking elements, mechanical properties and tests."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "51 pages, 0 scanned. SHA-256 ec160abdc96e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "12,456 of 12,765 items agreed. All 217 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1,168 checks on size series and limits. 35 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "41 pages of searchable text, 20 tables (3,601 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "148 solids in STEP AP242. 918 of 920 stated dimensions measure within limits; 2 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J, 8 December 2000.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table VI, column 'Body diameter (inches)(A) / Full body / Type I styles a & c / Max': 1.395 then 1.295. Page 37 prints 1.395 for the 1-3/8 UNC row and 1.295 for the 1-3/8 8UN row. The printed 1.295 looks wrong: it is below that row's minimum (1.360), and every other 8UN row repeats the UNC row's maximum, so 1.395 is expected. A point for an engineer.",
    "Printed value to confirm. Table VI, column 'Body diameter (inches)(A) / Full body / Type I styles b & d / Max': 1.395 then 1.295. Page 37 prints 1.395 for the 1-3/8 UNC row and 1.295 for the 1-3/8 8UN row in the styles b & d column. The printed 1.295 looks wrong: it is below that row's minimum (1.358), and every other 8UN row repeats the UNC row's maximum, so 1.395 is expected. A point for an engineer.",
    "Printed value to confirm. Table VI, row '1-3/8', 'body diameter (inches)(a) / full body / type i styles a & c': 1.295 then 1.36. Page 37 prints maximum 1.295 and minimum 1.360 for the 1-3/8 8UN row, styles a & c. The printed maximum looks wrong: it is below the minimum, and 1.395 (the 1-3/8 UNC maximum, nominal plus 0.020) is expected. A point for an engineer.",
    "Printed value to confirm. Table VI, row '1-3/8', 'body diameter (inches)(a) / full body / type i styles b & d': 1.295 then 1.358. Page 37 prints maximum 1.295 and minimum 1.358 for the 1-3/8 8UN row, styles b & d. The printed maximum looks wrong: it is below the minimum, and 1.395 (nominal plus 0.020) is expected. A point for an engineer.",
    "Printed value to confirm. Table VI, row '1-3/8', columns 'Size' and 'Body diameter (inches)(A) / Full Body / Type I Styles a & c / Max': 1.375 then 1.295. Page 37 prints 1.295 as the maximum for the 1-3/8 8UN row. The printed value looks wrong: every other row's maximum is the nominal size plus 0.020, and 1.375 + 0.020 = 1.395, which the 1-3/8 UNC row prints. A point for an engineer.",
    "Model. Table VI prints the 1-3/8 inch 8UN type I stud body diameter A as max 1.295 with min 1.360 (styles a, c) and 1.358 (b, d); 3.9.2.1 (a) gives 1.395. Both models fail this check; the engineer must confirm the maximum.",
    "Model. Table VI prints 'UNC' on both 1-1/8 inch rows; the models read the second, with the higher minimums, as 8UN; the engineer must confirm."
   ]
  },
  {
   "id": "MIL-G-18997E(SH) w/ AMENDMENT 2",
   "slug": "mil-g-18997e-sh-w-amendment-2",
   "title": "Gauge, pressure, dial indicating",
   "class": "Columbia",
   "folder": "Columbia/MIL-G-18997E(SH) w_ AMENDMENT 2 Gauge, pressure",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 42,
   "solids": 1,
   "dimensions": 28,
   "dimensions_met": 28,
   "kind": "Military specification",
   "dated": "14 March 2006",
   "status": "Active, 26 February 2021",
   "newest": "Revision E Notice 1 - Validation, 26 February 2021",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 7,
   "by_class": {
    "Columbia": 1,
    "Virginia": 3,
    "Los Angeles": 1,
    "Ohio": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "6685-01-515-7609, gage, pressure, dial indicating, MIL-G-18997 MOD (Columbia)",
    "6685-01-508-0490, gage, pressure, dial indicating, MIL-G-18997E (Virginia)",
    "6685-01-509-4693, gage, pressure, dial indicating, MIL-G-18997E (Virginia)",
    "6685-01-509-4699, gage, pressure, dial indicating, MIL-G-18997E (Virginia)"
   ],
   "files": {
    "package": "MIL-G-18997E(SH) w_ AMENDMENT 2 package.pdf",
    "scan": "MIL-G-18997E(SH) w_ AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-G-18997E(SH) w_ AMENDMENT 2 clean copy.pdf",
    "record": "MIL-G-18997E(SH) w_ AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-G-18997E(SH) w_ AMENDMENT 2 3D model.pdf",
    "parts": "MIL-G-18997E(SH) w_ AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-G-18997E(SH) w_ AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 34",
   "pictures": {
    "iso": "Models/views/MIL-G-18997_HEMPI_1-1_4-freecad.png",
    "pair": "Models/views/MIL-G-18997_HEMPI_1-1_4-pair.png",
    "record": "Models/views/MIL-G-18997_HEMPI_1-1_4-record.png",
    "front": "Models/views/MIL-G-18997_HEMPI_1-1_4-front.png",
    "top": "Models/views/MIL-G-18997_HEMPI_1-1_4-top.png",
    "right": "Models/views/MIL-G-18997_HEMPI_1-1_4-right.png",
    "cut": "Models/views/MIL-G-18997_HEMPI_1-1_4-cut.png"
   },
   "shown_part": "MIL-G-18997 HEMPI 1-1/4",
   "application": "FreeCAD 1.1.4",
   "modeled": "One envelope solid of the single-size HEMPI vertical-scale case of Figure 1: a solid case body behind a 5.25 by 1.19 mounting flange, the scale window, four 6-32 captive screws, the 7/16-20 UNF-2B pressure connection boss at the lower back and two electrical interface terminals at the upper back.",
   "not_modeled": [
    "The circular dial gauges (2, 2-1/2, 3-1/2, 4-1/2 and 8-1/2 inch): their case shapes are set by Drawing 803-1385799 and the flush mounting ring by Drawing 803-841569, which are not in this document; Table II (panel hole, bolt circle, bolt holes) and Table V (numeral height, scale base line, dial bank) give values by dial size with no case drawing.",
    "The case interior, movement, helical bourdon tube, dial, pointer and window glazing; the solid is an outside envelope.",
    "The middle hole in each screw row of the front view, the screw heads and the screw retainers, which Figure 1 shows but does not dimension.",
    "Scale graduations and numerals, case markings on the top surface, and the outline of the electrical interface housing.",
    "The panel openings for two to ten indicators in Table III, which are cutouts in the panel rather than part of the gauge.",
    "Thread form of the 6-32 UNC screws and of the 7/16-20 UNF-2B port, and the SAE J1926/1 port spot face and O-ring seat.",
    "The adapter fitting (7/16-20 UNF-2A to 9/16-18 UNF-3A, nut, O-ring and tailpiece to Drawing 803-1385850)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "42 pages, 2 scanned. SHA-256 51754e126138.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "16,005 of 16,062 items agreed. 53 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "284 checks on size series and limits. 8 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "44 pages of searchable text, 36 tables (926 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "1 solid in STEP AP242. 28 of 28 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 1 - Validation, 26 February 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 1, Front view scale: read as .",
    "Model. Table III prints the two-indicator panel opening as 3-3/8 horizontal, but One is 1-3/16 and every row from Three (3-9/16) to Ten (11-7/8) steps by exactly 1-3/16, which puts Two at 2-3/8.",
    "Model. Figure 1 does not give the width of the case body behind the flange; it must not exceed the 1-3/16 one-indicator opening of Table III, while the face is 1.19 MAX.",
    "Model. Figure 1 does not give the thickness of the bezel, so the plane from which the .75 captive screw length is measured is not fixed; the model takes it at half the 0.50 flange depth."
   ]
  },
  {
   "id": "MIL-PRF-39012F w/AMENDMENT 5",
   "slug": "mil-prf-39012f-w-amendment-5",
   "title": "Connectors, coaxial, radio frequency, general specification for",
   "class": "Columbia",
   "folder": "Columbia/MIL-PRF-39012F w_AMENDMENT 5 Connectors, coaxial",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 41,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "20 August 2026",
   "status": "Active, 20 August 2026",
   "newest": "Revision F Amendment 5 (all previous amendments incorporated), 20 August 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Columbia": 1
   },
   "stock_examples": [
    "5935-01-722-1597, connector, receptacle, electrical, M39012-02-0511A (Columbia)"
   ],
   "files": {
    "package": "MIL-PRF-39012F w_AMENDMENT 5 package.pdf",
    "scan": "MIL-PRF-39012F w_AMENDMENT 5 legacy scan.pdf",
    "clean": "MIL-PRF-39012F w_AMENDMENT 5 clean copy.pdf",
    "record": "MIL-PRF-39012F w_AMENDMENT 5 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "41 pages, 4 scanned. SHA-256 3d7d2ee7f9ed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "12,608 of 12,759 items agreed. All 46 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "193 checks on size series and limits. 8 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "39 pages of searchable text, 24 tables (1,731 cells), 8 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-39012 is the general specification for RF coaxial connectors: it defines materials, plating codes, performance requirements, test methods and set-ups (contact resistance, vibration, corona, RF leakage, insertion loss, safety wire pullout), inspection tables, PIN cross-references and cable groupings, and leaves connector configuration and dimensions to the individual specification sheets.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 5 (all previous amendments incorporated), 20 August 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-39012/2H w/AMENDMENT 5",
   "slug": "mil-prf-39012-2h-w-amendment-5",
   "title": "Connectors, plugs and receptacles, electrical, coaxial, radio frequency, (series N (cabled), flange mounted, socket contact, class 2)",
   "class": "Columbia",
   "folder": "Columbia/MIL-PRF-39012_2H w_AMENDMENT 5 Connectors, plugs and receptacles",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 19,
   "solids": 83,
   "dimensions": 1058,
   "dimensions_met": 1058,
   "kind": "Performance specification sheet",
   "dated": "10 November 2021",
   "status": "Active, 10 November 2021",
   "newest": "Revision H Amendment 5 (all previous amendments incorporated), 10 November 2021",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Columbia": 1,
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-722-1597, connector, receptacle, electrical, MIL-PRF-39012/2 (Columbia)",
    "5935-01-514-9753, connector, receptacle, electrical, M39012/02-0133 (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-39012_2H w_AMENDMENT 5 package.pdf",
    "scan": "MIL-PRF-39012_2H w_AMENDMENT 5 legacy scan.pdf",
    "clean": "MIL-PRF-39012_2H w_AMENDMENT 5 clean copy.pdf",
    "record": "MIL-PRF-39012_2H w_AMENDMENT 5 validation record.pdf",
    "sheet": "MIL-PRF-39012_2H w_AMENDMENT 5 3D model.pdf",
    "parts": "MIL-PRF-39012_2H w_AMENDMENT 5 parts list.pdf",
    "inspection": "MIL-PRF-39012_2H w_AMENDMENT 5 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39012_02-X513-freecad.png",
    "pair": "Models/views/M39012_02-X513-pair.png",
    "record": "Models/views/M39012_02-X513-record.png",
    "front": "Models/views/M39012_02-X513-front.png",
    "top": "Models/views/M39012_02-X513-top.png",
    "right": "Models/views/M39012_02-X513-right.png",
    "cut": "Models/views/M39012_02-X513-cut.png"
   },
   "shown_part": "M39012/02-X513",
   "application": "FreeCAD 1.1.4",
   "modeled": "77 envelope solids of the MIL-PRF-39012/2 Series N flange-mounted receptacles and plugs, one per dash number in tables I and III, each A long and B in largest diameter with a .630 mating end, the receptacles carrying the square four-hole flange of figure 1; plus the 2 category D center contacts and 4 crimp ferrules of figure 3.",
   "not_modeled": [
    "The Series N socket contact interface, insulator, center contact position and coupling thread form, which note 7 sends to MIL-STD-348; the connector solids are solid envelopes with no bore.",
    "The category D captivation detail of figure 2 (.278 \u00b1 .007 insert face to reference plane, .032 MIN step, .103 MIN entry hole with its 30\u00b0 chamfer), which sits inside the envelope.",
    "The .218 MAX panel thickness, which is a mounting allowance rather than a surface of the connector, and the wrench flats of note 4, which have no dimensions.",
    "The cable entry and the cable stripping lengths of figure 4, which describe the cable, not a connector part.",
    "The .207/.187 distance from the reference plane to the front of the center contact, which locates the contact in the assembled connector rather than shaping it.",
    "The tapered outside and slotted socket bore of the center contact's mating end, which figure 3 draws but does not dimension, the color bands, and the .003 maximum edge break of note 5.",
    "Plating option X (silver or nickel), which does not change geometry: one solid stands for both platings of a dash number."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "19 pages, 0 scanned. SHA-256 9b53f564b252.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,771 of 2,310 items agreed. All 193 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "128 checks on size series and limits. 8 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "15 pages of searchable text, 13 tables (767 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "83 solids in STEP AP242. 1,058 of 1,058 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 5 (all previous amendments incorporated), 10 November 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 prints the flange thickness as .085/.075, but the conversion table beside it on page 2 lists .086 (2.18 mm) and no .085; the solids use the figure's .085.",
    "Model. On the 19 receptacles with B = .906 (X133, X060 to X068 and X160 to X168), a rear body of full diameter B at the flange reaches .453 from the axis, past the near edges of the mounting holes at .4512 even at the .723 pattern and .120 hole limits, so the body must step down behind the flange by an amount the document does not give."
   ]
  },
  {
   "id": "MIL-R-83248/2(USAF)",
   "slug": "mil-r-83248-2-usaf",
   "title": "Rubber, fluorocarbon elastomer, high temperature, fluid, and compression set resistant, O-rings, class 2, 90 hardness",
   "class": "Columbia",
   "folder": "Columbia/MIL-R-83248_2(USAF) Rubber, fluorocarbon elastomer",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification sheet",
   "dated": "27 January 1971",
   "status": "Canceled, 22 January 2004",
   "newest": "Notice 4 - Cancellation, 22 January 2004",
   "superseding": "SAE-AS3581 AND SAE-AMS7259",
   "preparing_activity": "Air Force Life Cycle Management Center - Aircraft Systems",
   "stock_numbers": 7,
   "by_class": {
    "Columbia": 1,
    "Virginia": 2,
    "Los Angeles": 4,
    "Ohio": 1,
    "Seawolf": 2
   },
   "stock_examples": [
    "5331-01-714-3118, o-ring, M83248/2-459 (Columbia)",
    "5331-01-148-2691, o-ring, M83248/2-038 (Los Angeles, Virginia)",
    "5331-01-304-9500, o-ring, M83248/2-455 (Virginia, Los Angeles, Seawolf)",
    "5331-01-106-0936, o-ring, M83248/2-117 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-R-83248_2(USAF) package.pdf",
    "scan": "MIL-R-83248_2(USAF) legacy scan.pdf",
    "clean": "MIL-R-83248_2(USAF) clean copy.pdf",
    "record": "MIL-R-83248_2(USAF) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 ef83ffbf354b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "112 of 112 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "1 page of searchable text, 0 tables (0 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "The sheet sets up part numbers only. It prints no drawing or dimensions and refers to MIL-R-83248/1 for both.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Notice 4 - Cancellation, 22 January 2004. ASSIST also holds Amendment 1 (8 November 1973). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS3406(NAVY)",
   "slug": "ms3406-navy",
   "title": "Connectors, plug, electric, front release, crimp contact, AN type",
   "class": "Columbia",
   "folder": "Columbia/MS3406(NAVY) Connectors, plug",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 164,
   "dimensions": 924,
   "dimensions_met": 924,
   "kind": "Military standard",
   "dated": "9 April 1979",
   "status": "Canceled, 23 December 2009",
   "newest": "Revision H Notice 3 - Cancellation, 23 December 2009",
   "superseding": "SAE-AS34061",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 74,
   "by_class": {
    "Columbia": 1,
    "Virginia": 19,
    "Los Angeles": 7,
    "Ohio": 38,
    "Seawolf": 10
   },
   "stock_examples": [
    "5935-01-737-4014, connector, plug, electrical, MS3406 (Columbia)",
    "5935-01-513-2441, connector, plug, electrical, MS3406DJ-15E7EY (Virginia)",
    "5935-01-514-5723, connector, plug, electrical, MS3406D12S-3PY (Virginia)",
    "5935-01-514-5725, connector, plug, electrical, MS3406D12S-3PX (Virginia)"
   ],
   "files": {
    "package": "MS3406(NAVY) package.pdf",
    "scan": "MS3406(NAVY) legacy scan.pdf",
    "clean": "MS3406(NAVY) clean copy.pdf",
    "record": "MS3406(NAVY) validation record.pdf",
    "sheet": "MS3406(NAVY) 3D model.pdf",
    "parts": "MS3406(NAVY) parts list.pdf",
    "inspection": "MS3406(NAVY) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 3",
   "pictures": {
    "iso": "Models/views/MS3406DJ_10AXX-freecad.png",
    "pair": "Models/views/MS3406DJ_10AXX-pair.png",
    "record": "Models/views/MS3406DJ_10AXX-record.png",
    "front": "Models/views/MS3406DJ_10AXX-front.png",
    "top": "Models/views/MS3406DJ_10AXX-top.png",
    "right": "Models/views/MS3406DJ_10AXX-right.png",
    "cut": "Models/views/MS3406DJ_10AXX-cut.png"
   },
   "shown_part": "MS3406DJ 10AXX",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of revolution for each MS3406D plug shell size 8S to 48 (with the long-body variant for size 8, 4 and 0 contacts) and for each MS3406DJ plug and MS3437B backshell assembly 10AXX to 48EXX, at standard and note 3 lengths.",
   "not_modeled": [
    "Insert arrangements, contacts, polarizing keyway, O-ring and the front and rear end configuration, which the document refers to MIL-STD-1651 and MIL-C-5015.",
    "The MS3437B backshell internals, cable clamp saddle bars and screws, and thread form.",
    "Material and finish classes, which do not change the envelope."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 0ddd91188eed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,151 of 1,318 items agreed. All 83 differences were settled against the page image. A second pass settled 8 from a second printing in the document, 3 from the same value on another sheet of the series.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "217 checks on size series and limits. 2 breaks checked against the scan: all are as printed. 705 values are also printed on 9 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 3 tables (830 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "164 solids in STEP AP242. 924 of 924 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision H Notice 3 - Cancellation, 23 December 2009.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS51975E",
   "slug": "ms51975e",
   "title": "Screw, shoulder - socket head, hexagon, alloy steel, cadmium plated, UNC-3A",
   "class": "Columbia",
   "folder": "Columbia/MS51975E Screw, shoulder - socket head",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 78,
   "dimensions": 1326,
   "dimensions_met": 1326,
   "kind": "Military specification sheet",
   "dated": "3 MAR 95",
   "status": "Canceled, 25 November 1998",
   "newest": "Revision E Notice 1 - Cancellation, 25 November 1998",
   "superseding": "NASM51975",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Columbia": 1
   },
   "stock_examples": [
    "5305-01-723-4464, screw, shoulder, MS51975K21 (Columbia)"
   ],
   "files": {
    "package": "MS51975E package.pdf",
    "scan": "MS51975E legacy scan.pdf",
    "clean": "MS51975E clean copy.pdf",
    "record": "MS51975E validation record.pdf",
    "sheet": "MS51975E 3D model.pdf",
    "parts": "MS51975E parts list.pdf",
    "inspection": "MS51975E inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS51975-40-freecad.png",
    "pair": "Models/views/MS51975-40-pair.png",
    "record": "Models/views/MS51975-40-record.png",
    "front": "Models/views/MS51975-40-front.png",
    "top": "Models/views/MS51975-40-top.png",
    "right": "Models/views/MS51975-40-right.png",
    "cut": "Models/views/MS51975-40-cut.png"
   },
   "shown_part": "MS51975-40",
   "application": "FreeCAD 1.1.4",
   "modeled": "78 socket head shoulder screws, one per Table II dash number (every nominal size .250 to 1.250 from Table I at each shoulder length listed for it), with hexagon socket, head chamfer, shoulder neck relief, head and thread neck fillets, thread neck, plain-cylinder thread and chamfered point.",
   "not_modeled": [
    "Screw threads (UNC-3A per FED-STD-H28/2) are modeled as plain cylinders at the basic major diameter.",
    "Knurled head option, source-identification marking, cadmium plating and material are not modeled.",
    "Tensile and shear strengths in Table I are load requirements, not geometry.",
    "The 'acceptable design' variant with a head fillet and no shoulder neck relief is not modeled; the relieved neck (K, F) is."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 f36cf43dae25.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "949 of 1,022 items agreed. All 64 differences were settled against the page image. A second pass settled 1 from a closer look at the page, 3 from another revision, 5 from a second printing in the document.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "319 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (390 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "78 solids in STEP AP242. 1,326 of 1,326 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 1 - Cancellation, 25 November 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no depth for the hexagon socket; the figure draws it with a pointed bottom and puts no dimension on it. The model cuts a flat-bottomed socket to half the head height, so an engineer must supply the depth and bottom form from a source outside this sheet, which cites MIL-S-21472 for its requirements.",
    "Model. Table I prints head diameter A for the 1.000 size as 1.312 maximum and 1.267 minimum, a spread of .045 where the other seven sizes run .018 to .027; Revision D prints the same 1.267 and Revision C of 1984 prints 1.287. The model takes the middle of the printed limits, and an engineer must confirm which minimum holds."
   ]
  },
  {
   "id": "A-A-52426A (AT)",
   "slug": "a-a-52426a-at",
   "title": "Hose and hose assemblies, non-metallic, silicone, polyester and wire reinforced (for coolant and heating systems of diesel and gasoline powered engines)",
   "class": "Virginia",
   "folder": "Virginia/A-A-52426A (AT) Hose and hose assemblies, non-metallic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 15,
   "solids": 261,
   "dimensions": 1906,
   "dimensions_met": 1906,
   "kind": "Commercial item description",
   "dated": "21 May 2012",
   "status": "Active, 24 November 2021",
   "newest": "Revision A Notice 2 - Validation, 24 November 2021",
   "superseding": "",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 2
   },
   "stock_examples": [
    "4720-01-507-4361, hose, nonmetallic, A-A-52426 (Virginia)",
    "4720-01-507-4370, hose, nonmetallic, A-A-52426 (Virginia)"
   ],
   "files": {
    "package": "A-A-52426A (AT) package.pdf",
    "scan": "A-A-52426A (AT) legacy scan.pdf",
    "clean": "A-A-52426A (AT) clean copy.pdf",
    "record": "A-A-52426A (AT) validation record.pdf",
    "sheet": "A-A-52426A (AT) 3D model.pdf",
    "parts": "A-A-52426A (AT) parts list.pdf",
    "inspection": "A-A-52426A (AT) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 2, page 4",
   "pictures": {
    "iso": "Models/views/A_52426-2PHCH-freecad.png",
    "pair": "Models/views/A_52426-2PHCH-pair.png",
    "record": "Models/views/A_52426-2PHCH-record.png",
    "front": "Models/views/A_52426-2PHCH-front.png",
    "top": "Models/views/A_52426-2PHCH-top.png",
    "right": "Models/views/A_52426-2PHCH-right.png",
    "cut": "Models/views/A_52426-2PHCH-cut.png"
   },
   "shown_part": "A 52426-2PHCH",
   "application": "FreeCAD 1.1.4",
   "modeled": "Plain tube solids of all four hose types: type I straight bulk hose in 19 sizes at the 3, 25 and 40 foot bulk lengths, type II preformed hose in 12 sizes at each of the 6 bend angles, type III cuffed hose in 8 sizes at all 16 lengths, and type IV hose in 4 sizes at 3 feet; the type III and type IV solids are envelopes that leave out the corrugation, wire and end fittings.",
   "not_modeled": [
    "Type II is built with both legs at length dash H (12 inches) for every size and bend angle, 72 of the 18,432 type II part numbers that tables XII, XIII and XIV allow; the other leg lengths are not built.",
    "Type I bulk hose in lengths other than 3, 25 and 40 feet (3.2.7.1 allows multiples of them), and type IV hose at lengths other than 3 feet.",
    "The 1.500 \u00b1 0.375 cuff length at each end of type III hose: the solid is one plain tube at the cuff diameters, so the cuff and the corrugated body between the cuffs are not told apart.",
    "The corrugation and helical steel wire of the type III body, which figure 3 draws without dimensions, and a value for the type III wall, which 3.2.6.2 requires only to be uniform.",
    "The type IV steel end fittings to SAE J516 (one male, one female with a swivel, with the table II flares), which this document does not dimension.",
    "Type III hose at 1-3/8 (J), 2-3/8 (P), 2-3/4 (S), 3-1/2 (V) inch, which table X lists for type III but table IV gives no cuff diameters or inside diameter tolerance for.",
    "The inner tube, fabric or wire reinforcement and cover as separate layers, the marking, and the material, burst, adhesion and other test requirements of tables I, X and XI."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, 0 scanned. SHA-256 9ffcaeedbd94.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,792 of 2,811 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "115 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 15 tables (472 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "261 solids in STEP AP242. 1,906 of 1,906 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 2 - Validation, 24 November 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The document gives no bend radius, minimum straight length at the ends or bend angle tolerance for type II hose; the solids use a centerline radius of 1.5 times the nominal inside diameter and the table XIV angle exactly.",
    "Model. Table X gives burst pressures for types I, II and III at 1-3/8 (J), 2-3/8 (P), 2-3/4 (S), 3-1/2 (V) inch, sizes that table XII does not list for type II or type III and table IV gives no type III cuff for; the solids build type II at these sizes and type III at none of them.",
    "Model. Table X has no row for 1-3/4 (L) inch hose, though table XII lists it for types I, II and III and the table XV sample part numbers A 52426-2LABG and A 52426-3LA use it.",
    "Model. Figure 4 refers the type IV LENGTH to paragraph 2.2.7.2, which the document does not have; the type IV length is given in 3.2.7.2."
   ]
  },
  {
   "id": "A-A-52506E",
   "slug": "a-a-52506e",
   "title": "Clamps, hose",
   "class": "Virginia",
   "folder": "Virginia/A-A-52506E Clamps, hose",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "31 March 2023",
   "status": "Active, 31 March 2023",
   "newest": "Revision E, 31 March 2023",
   "superseding": "",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "4730-01-507-4272, clamp, hose, A-A-52506 (Virginia)"
   ],
   "files": {
    "package": "A-A-52506E package.pdf",
    "scan": "A-A-52506E legacy scan.pdf",
    "clean": "A-A-52506E clean copy.pdf",
    "record": "A-A-52506E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 2 scanned. SHA-256 aebd035cec8f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,178 of 1,184 items agreed. All 12 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 2 tables (24 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-52506E is a commercial item description for metal hose clamps that sets finish, marking and one maximum overlap band length per clamp type (F 0.75, I 0.50, M 0.44 in) and sends every clamp size, diameter and design dimension to SAE J1508.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E, 31 March 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-58060C",
   "slug": "a-a-58060c",
   "title": "Fluorocarbon and other refrigerants",
   "class": "Virginia",
   "folder": "Virginia/A-A-58060C Fluorocarbon and other refrigerants",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "28 Jul 2021",
   "status": "Active, 28 July 2021",
   "newest": "Revision C, 28 July 2021",
   "superseding": "",
   "preparing_activity": "Air Force Petroleum Office (AFPET/PTP)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 2
   },
   "stock_examples": [
    "6830-01-555-8678, tetrafluoroethane, A-A-58060R134AW9.071847 (Virginia)",
    "6830-01-708-4951, tetrafluoroethane, A-A-58060R134AW9.071847 (Virginia)"
   ],
   "files": {
    "package": "A-A-58060C package.pdf",
    "scan": "A-A-58060C legacy scan.pdf",
    "clean": "A-A-58060C clean copy.pdf",
    "record": "A-A-58060C validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 2a857c2eb94a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,121 of 1,124 items agreed. All 3 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 1 table (78 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-58060C is a commercial item description for fluorocarbon and other refrigerants that classifies 39 refrigerants by ASHRAE R number and chemical composition in Table I, sets purity by AHRI Standard 700, and covers cylinders, drums, safety data and a part-number scheme (AA 58060 - R22W120) by refrigerant type and pounds, with no dimensioned drawing of any part.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C, 28 July 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-59566A",
   "slug": "a-a-59566a",
   "title": "Hose, rubber, and hose assemblies, rubber, smooth bore, water suction and discharge",
   "class": "Virginia",
   "folder": "Virginia/A-A-59566A Hose, rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 18,
   "solids": 12,
   "dimensions": 135,
   "dimensions_met": 135,
   "kind": "Commercial item description",
   "dated": "24 January 2019",
   "status": "Active, 28 December 2023",
   "newest": "Revision A Notice 1 - Validation, 28 December 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1
   },
   "stock_examples": [
    "4720-01-507-0969, hose assembly, nonmetallic, A-A-59566 (Virginia)",
    "4720-01-441-7721, hose assembly, nonmetallic, A-A-59566 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-59566A package.pdf",
    "scan": "A-A-59566A legacy scan.pdf",
    "clean": "A-A-59566A clean copy.pdf",
    "record": "A-A-59566A validation record.pdf",
    "sheet": "A-A-59566A 3D model.pdf",
    "parts": "A-A-59566A parts list.pdf",
    "inspection": "A-A-59566A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 5, page 17",
   "pictures": {
    "iso": "Models/views/A-A-59566_Style_D_nipple_8-freecad.png",
    "pair": "Models/views/A-A-59566_Style_D_nipple_8-pair.png",
    "record": "Models/views/A-A-59566_Style_D_nipple_8-record.png",
    "front": "Models/views/A-A-59566_Style_D_nipple_8-front.png",
    "top": "Models/views/A-A-59566_Style_D_nipple_8-top.png",
    "right": "Models/views/A-A-59566_Style_D_nipple_8-right.png",
    "cut": "Models/views/A-A-59566_Style_D_nipple_8-cut.png"
   },
   "shown_part": "A-A-59566 Style D nipple 8",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the Figure 5 nipples for Style C hose and the Figure 6 nipples for Style D hose in sizes 4, 6, 8, 10 and 12, and the Figure 2 flange bolt at its two lengths.",
   "not_modeled": [
    "The Navy flanges A, B and C of Figures 3 and 4 with their lettered dimensions A to BB, the rubber ring, comp. G ring, brass hex compression nut, split pins, steel pins and flat head screws; the figures give diameters and lengths but not the cast profiles between them.",
    "The rubber hose itself (Table I inside diameters and tolerances, minimum tube and cover thickness), its plies and helix wire, the hose end constructions of Figure 1, and the Table I nipple length beyond the hose end, which is set when the nipple is built into the hose.",
    "The NPT thread form, taper and thread length on the nipples, and the .75-10 NC thread form on the bolt.",
    "Style D nipples longer than the B minimum and with more than the minimum two grooves.",
    "The standard 150 psi flanges of 3.5.1, the clamps, and the couplings defined by A-A-52506, A-A-59614 and SAE AS38404."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, 3 scanned. SHA-256 e2095353a9ab.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,687 of 4,753 items agreed. All 25 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "193 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "17 pages of searchable text, 11 tables (451 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "12 solids in STEP AP242. 135 of 135 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 28 December 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figures 5 and 6 print A for size 12 as 12.450, but their notes say the dimensions conform to ASTM A53, whose 12-inch pipe is 12.750 in outside diameter; the size 12 nipples are built at 12.450 as printed.",
    "Model. Figure 5 prints no Style C wall thickness, and its note 2 says schedule 40 while paragraph 3.4.6.2 calls for schedule 40 on the 4- and 6-inch sizes, schedule 30 on the 8- and 12-inch sizes, and names no schedule for the 10-inch size; the models use schedule 40 throughout.",
    "Model. The Figure 3 table prints Y as 6 and 3/4 and Z as 8 and 3/4 for the 6- and 8-inch flanges, and a Z of 8 cannot lie inside the P of 2 1/2 that Detail A draws around it, while Figure 4 prints Y 10 and 12 and Z 7/8 for both sizes; the flanges are not modeled."
   ]
  },
  {
   "id": "AN340",
   "slug": "an340",
   "title": "Nut, plain, hexagon, non-structural, coarse thread",
   "class": "Virginia",
   "folder": "Virginia/AN340 Nut, plain",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 36,
   "dimensions": 324,
   "dimensions_met": 324,
   "kind": "Air Force-Navy aeronautical standard",
   "dated": "30 Sep 1970",
   "status": "Inactive, 14 November 2023",
   "newest": "Revision 5 Notice 2 - Validation, 14 November 2023",
   "superseding": "",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5310-00-167-1374, nut, plain, hexagon, AN340C3 (Virginia, Los Angeles, Seawolf)"
   ],
   "files": {
    "package": "AN340 package.pdf",
    "scan": "AN340 legacy scan.pdf",
    "clean": "AN340 clean copy.pdf",
    "record": "AN340 validation record.pdf",
    "sheet": "AN340 3D model.pdf",
    "parts": "AN340 parts list.pdf",
    "inspection": "AN340 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/AN340-8-freecad.png",
    "pair": "Models/views/AN340-8-pair.png",
    "record": "Models/views/AN340-8-record.png",
    "front": "Models/views/AN340-8-front.png",
    "top": "Models/views/AN340-8-top.png",
    "right": "Models/views/AN340-8-right.png",
    "cut": "Models/views/AN340-8-cut.png"
   },
   "shown_part": "AN340-8",
   "application": "FreeCAD 1.1.4",
   "modeled": "36 plain hexagon nuts, one per AN part number in the table (dash numbers -2 to -616 in alloy steel, corrosion-resistant steel, brass and, where listed, aluminum alloy), each with a 30\u00b0 corner chamfer on the face opposite the washer face, a .016 washer face, a plain bore at the thread minor diameter and a 110\u00b0 countersink on both faces.",
   "not_modeled": [
    "Internal threads (NC-2B/UNC-2B per MIL-S-7742) are modeled as a plain bore at the basic minor diameter.",
    "The optional chamfer in lieu of the washer face is not modeled; every solid carries the washer face.",
    "Material, heat treatment, finish, burr freedom and the aluminum-alloy A tolerance relief of note (b) are not geometry and are not modeled.",
    "The four material columns share one geometry, so solids of the same dash number are identical apart from part number."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 6d082b7268b0.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "359 of 512 items agreed. All 23 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "163 checks on size series and limits. 10 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 1 table (120 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "36 solids in STEP AP242. 324 of 324 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision 5 Notice 2 - Validation, 14 November 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The figure calls out the 110\u00b0 countersink with a single leader to the hole on the washer-face side and does not say whether the opposite, chamfered face is countersunk as well. The models countersink both faces; the engineer must confirm whether the countersink applies to one face or to both."
   ]
  },
  {
   "id": "FF-S-85F w/AMENDMENT 3",
   "slug": "ff-s-85f-w-amendment-3",
   "title": "Screw, cap, slotted and hexagon head",
   "class": "Virginia",
   "folder": "Virginia/FF-S-85F w_AMENDMENT 3 Screw, cap",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 20,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "August 6, 2024",
   "status": "Active, 6 August 2024",
   "newest": "Revision F Amendment 3 (all previous amendments incorporated), 6 August 2024",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1
   },
   "stock_examples": [
    "5305-01-528-9585, screw, cap, socket head, FF-S-85 TY 6 (Virginia)",
    "5305-01-499-7663, screw, cap, socket head, FF-S-85 (Los Angeles)"
   ],
   "files": {
    "package": "FF-S-85F w_AMENDMENT 3 package.pdf",
    "scan": "FF-S-85F w_AMENDMENT 3 legacy scan.pdf",
    "clean": "FF-S-85F w_AMENDMENT 3 clean copy.pdf",
    "record": "FF-S-85F w_AMENDMENT 3 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "20 pages, 2 scanned. SHA-256 c2055991cc57.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,775 of 5,653 items agreed. All 28 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "22 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "16 pages of searchable text, 3 tables (172 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "FF-S-85 is a procurement specification for slotted and hexagon head cap screws that sets materials, mechanical properties, tests and inspection defect classes, and sends all head, body and thread dimensions to ASME B18.2.1 and ASME B1.1; its only dimensioned figure is a tension-test specimen, not the part.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 3 (all previous amendments incorporated), 6 August 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "FF-S-86J",
   "slug": "ff-s-86j",
   "title": "Screw, cap, socket-head",
   "class": "Virginia",
   "folder": "Virginia/FF-S-86J Screw, cap",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 30,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "1 April 2025",
   "status": "Active, 1 April 2025",
   "newest": "Revision J, 1 April 2025",
   "superseding": "",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 22,
   "by_class": {
    "Virginia": 2,
    "Los Angeles": 16,
    "Seawolf": 5
   },
   "stock_examples": [
    "5305-00-058-2072, screw, cap, socket head, FF-S-86 (Los Angeles, Virginia)",
    "5305-01-528-9585, screw, cap, socket head, FF-S-86E (Virginia)",
    "5305-00-165-8087, screw, cap, socket head, FF-S-86 (Los Angeles)",
    "5305-01-272-5307, screw, cap, socket head, FF-S-86 (Los Angeles)"
   ],
   "files": {
    "package": "FF-S-86J package.pdf",
    "scan": "FF-S-86J legacy scan.pdf",
    "clean": "FF-S-86J clean copy.pdf",
    "record": "FF-S-86J validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "30 pages, 1 scanned. SHA-256 303e5b0f2c01.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "8,523 of 8,742 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "278 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "29 pages of searchable text, 9 tables (916 cells), 7 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "FF-S-86J is a procurement specification for socket head cap screws (cylindrical, flat countersunk and button heads) that sets materials, mechanical properties, threads, marking, discontinuity limits and inspection, and sends all head, body, socket and thread dimensions to ASME B18.3 and ASME B1.1; its only dimensioned figure, Figure 2 with Table I, gives the cross-drilled hole diameter and its distance from the top of a cylindrical head, not the screw itself.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J, 1 April 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "FF-S-92E w/AMENDMENT 1",
   "slug": "ff-s-92e-w-amendment-1",
   "title": "Screw, machine, slotted, cross-recessed or hexagon head",
   "class": "Virginia",
   "folder": "Virginia/FF-S-92E w_AMENDMENT 1 Screw, machine",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 10,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "5 MAY 2025",
   "status": "Active, 5 May 2025",
   "newest": "Revision E Amendment 1 (amendment incorporated), 5 May 2025",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 7,
   "by_class": {
    "Virginia": 2,
    "Los Angeles": 3,
    "Seawolf": 3
   },
   "stock_examples": [
    "5305-01-445-5621, screw, machine, FF-S-92 (Los Angeles, Virginia)",
    "5305-01-619-5461, screw, machine, FF-S-92 (Virginia)",
    "5305-01-484-9737, screw, machine, FF-S-92B TY3 STY 2C 0.375-16UNC (Los Angeles)",
    "5305-01-486-5084, screw, machine, FF-S-92 (Los Angeles)"
   ],
   "files": {
    "package": "FF-S-92E w_AMENDMENT 1 package.pdf",
    "scan": "FF-S-92E w_AMENDMENT 1 legacy scan.pdf",
    "clean": "FF-S-92E w_AMENDMENT 1 clean copy.pdf",
    "record": "FF-S-92E w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "10 pages, 1 scanned. SHA-256 839616d4eb07.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,762 of 2,783 items agreed. All 22 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "14 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 4 tables (128 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "FF-S-92 is a general specification for slotted, cross-recessed and hexagon head machine screws that defines types and styles, materials, mechanical properties, finishes, threads and inspection, and refers all dimensions and tolerances to the applicable MS standards and ASME B18.6.3.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 1 (amendment incorporated), 5 May 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-C-24217A(SH)",
   "slug": "mil-c-24217a-sh",
   "title": "Connectors, electrical, deep submergence, submarine",
   "class": "Virginia",
   "folder": "Virginia/MIL-C-24217A(SH) Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 59,
   "solids": 5,
   "dimensions": 50,
   "dimensions_met": 50,
   "kind": "Military specification",
   "dated": "5 September 1984",
   "status": "Active, 11 March 2020",
   "newest": "Revision A Notice 1 - Validation, 11 March 2020",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-C-24217A(SH) package.pdf",
    "scan": "MIL-C-24217A(SH) legacy scan.pdf",
    "clean": "MIL-C-24217A(SH) clean copy.pdf",
    "record": "MIL-C-24217A(SH) validation record.pdf",
    "sheet": "MIL-C-24217A(SH) 3D model.pdf",
    "parts": "MIL-C-24217A(SH) parts list.pdf",
    "inspection": "MIL-C-24217A(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 23",
   "pictures": {
    "iso": "Models/views/MIL-C-24217_size_8_solder_pin-freecad.png",
    "pair": "Models/views/MIL-C-24217_size_8_solder_pin-pair.png",
    "record": "Models/views/MIL-C-24217_size_8_solder_pin-record.png",
    "front": "Models/views/MIL-C-24217_size_8_solder_pin-front.png",
    "top": "Models/views/MIL-C-24217_size_8_solder_pin-top.png",
    "right": "Models/views/MIL-C-24217_size_8_solder_pin-right.png",
    "cut": "Models/views/MIL-C-24217_size_8_solder_pin-cut.png"
   },
   "shown_part": "MIL-C-24217 size 8 solder pin",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solder type pin contacts of Figure 1 for contact sizes 16, 12, 8, 4 and 0: a round pin of diameter A with a spherical nose, joined to a solder cup of outside diameter D, bore B, bore depth C, length E and a half-section cut-away of length F.",
   "not_modeled": [
    "The insulator and its seal shown around the pin in Figure 1.",
    "The 1/32 maximum vent hole, whose location is not dimensioned.",
    "The 50-70 degree chamfer at the cup and the optional radius at the end of the cut-away.",
    "The 32 microinch surface finish and plating.",
    "Figure 2 alternate polarization angles, which locate keys on connector shells defined by the MIL-C-24217 specification sheets, not on these contacts."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "59 pages, all scanned. SHA-256 a793ce2e4c28.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "8,777 of 9,169 items agreed. All 122 differences were settled against the page image. A second pass settled 3 from a second printing in the document, 2 from a closer look at the page, 1 from the sheet's layout (a point the scan did not print).",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "492 checks on size series and limits. 38 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "42 pages of searchable text, 14 tables (2,220 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "5 solids in STEP AP242. 50 of 50 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 11 March 2020. ASSIST also holds Revision A Amendment 1 (17 January 1989). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table X, row 3-002 on page 30, prints the superseded drawing as 11197437, eight digits. Rows 3-001 and 3-003 to 3-014 all print 1197437, so the extra leading 1 looks like a typing error.",
    "Printed value to confirm. Table X, row 11-010 on page 47, prints the superseded drawing as 2297450. Every other union type receptacle from 11-001 to 11-014 prints 1197450, so the leading 22 looks like a typing error.",
    "Printed value to confirm. Table XI on page 53 lists symbol 1240.3 twice: for 8-002 in its place after 1240.2, and again for 8-001 out of order between 1242.1 and 1244. Table X on page 38 also gives the pair 8-001 and 8-002 the single symbol 1240.3, so the symbol for 8-001 needs confirming.",
    "Model. Figure 1 dimensions the solder cup and the pin diameter but gives no pin length. The models use 1.000 inch from the nose to the cup; an engineer must take the pin length for each connector from its specification sheet or contact drawing."
   ]
  },
  {
   "id": "MIL-C-24217/1(SH)",
   "slug": "mil-c-24217-1-sh",
   "title": "Receptacle assembly (welded type)",
   "class": "Virginia",
   "folder": "Virginia/MIL-C-24217_1(SH) Receptacle assembly, welded type",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 10,
   "solids": 26,
   "dimensions": 249,
   "dimensions_met": 249,
   "kind": "Military specification sheet",
   "dated": "5 September 1984",
   "status": "Active, 10 March 2020",
   "newest": "Notice 2 - Validation, 10 March 2020",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-593-1129, cover, electrical connector, M24217/1-048 (Virginia)"
   ],
   "files": {
    "package": "MIL-C-24217_1(SH) package.pdf",
    "scan": "MIL-C-24217_1(SH) legacy scan.pdf",
    "clean": "MIL-C-24217_1(SH) clean copy.pdf",
    "record": "MIL-C-24217_1(SH) validation record.pdf",
    "sheet": "MIL-C-24217_1(SH) 3D model.pdf",
    "parts": "MIL-C-24217_1(SH) parts list.pdf",
    "inspection": "MIL-C-24217_1(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 3, page 5",
   "pictures": {
    "iso": "Models/views/M24217_1-040-freecad.png",
    "pair": "Models/views/M24217_1-040-pair.png",
    "record": "Models/views/M24217_1-040-record.png",
    "front": "Models/views/M24217_1-040-front.png",
    "top": "Models/views/M24217_1-040-top.png",
    "right": "Models/views/M24217_1-040-right.png",
    "cut": "Models/views/M24217_1-040-cut.png"
   },
   "shown_part": "M24217/1-040",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 15 receptacle shells M24217/1-025 to -039 (Figure 2, Table II) and the 11 protective caps M24217/1-040 to -050 (Figure 3, Table III), each sized at the middle of its two table limits.",
   "not_modeled": [
    "Receptacle assemblies M24217/1-001 to -015, which combine a shell, pin contacts, insulation, O-rings and a cap.",
    "Pin contacts, contact insulation and their positions from Figures 4 to 6.",
    "The major polarizing key (M, N and the .092/.055 width), the internal steps located by K, L and S and by the .392/.411, .240/.260, .140/.145 and .180/.200 dimensions, the solder pot cutouts and the shell O-ring groove profile.",
    "Thread form, chamfers, corner radii, the cap knurl and the geometric tolerances (flatness, perpendicularity, parallelism, runout)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "10 pages, all scanned. SHA-256 7c6d6c55d347.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,020 of 1,072 items agreed. 47 differences went to a third reader. A second pass settled 1 from the same value on another sheet of the series, 10 from a second printing in the document, 2 from a closer look at the page. 12 readings remain open. 1 mark outside the technical content is kept as transcription notes.",
     "result": "12 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "208 checks on size series and limits. 20 breaks checked against the scan: all are as printed. 14 values are also printed on 2 other sheets of the series: 13 match, 1 differs as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 3 tables (850 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "26 solids in STEP AP242. 249 of 249 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Notice 2 - Validation, 10 March 2020.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table II, M24217/1-026 and -027, column P lower: read as .260, could be .250.",
    "Open reading. Table II, M24217/1-027, column B: read as 1.690 / 1.680, could be 1.590 / 1.580 or 1.890 / 1.880.",
    "Open reading. Table II, M24217/1-031, column C lower: read as 2.835, could be 2.825.",
    "Open reading. Table II, M24217/1-031, column F: read as 3.420 / 3.400, could be 2.420 / 2.400.",
    "Open reading. Table II, M24217/1-031, column G lower: read as 1.085, could be 1.005.",
    "Open reading. Table II, M24217/1-031, column H lower: read as 1.025, could be 1.035.",
    "Open reading. Figure 2, callouts, major key width, lower value of .092 over .055 (TYP): read as .055 (TYP), could be .095 (TYP).",
    "Open reading. Figure 2, callouts, lower value of .392 over .411: read as .411, could be .417.",
    "Open reading. Table III, M24217/1-048, column A lower: read as 2.365, could be 2.368.",
    "Open reading. Figure 4, callouts, 24 NO 16 view, top: read as .368 (TYP), could be .365 (TYP).",
    "Open reading. Figure 6, callouts, 3 NO 4 view, contact 2 below datum D: read as .330, could be .350.",
    "Open reading. Figure 6, callouts, 2 NO 0 view, left No. 0 contact from datum C: read as .386, could be .385.",
    "Differs within the series. Protective cap part number, 012: M24217/1-048 here; MIL-C-24217/4 prints M24217/1-049. For the 3 NO. 4 receptacle MIL-C-24217/1 prints M24217/1-048 on page 2 (the last digit has two closed bowls, like the 8 in the row above and unlike the 9 in the rows for -010 and -013) and MIL-C-24217/4 prints M24217/1-049 on page 2. Table III of MIL-C-24217/1 (page 6) lists 3 NO 4 under cap M24217/1-049, whose 2-1/2 thread is the thread of the 3 NO. 4 shell; cap -048 has a 2-1/8 thread.",
    "Model. Figure 2 does not dimension the length of thread A. The model runs the thread from the front face to the shoulder at G; the engineer must confirm where the thread ends.",
    "Model. Figure 2 is drawn small and the scan does not show clearly which internal steps P, L, K and S and the .392/.411, .240/.260, .140/.145 and .180/.200 dimensions locate. The model builds the counterbore D to depth P, the bore E from there to the web at H and the rear bore C to depth J, and leaves the other steps out; the engineer must confirm the internal profile.",
    "Model. Table II gives M24217/1-031 a body diameter B of 3.750 over 3.740, the same as its 3-3/4 thread, so the model has almost no shoulder at G for this size; every other shell has B at least .06 below its thread diameter. The engineer should confirm B.",
    "Model. Table III gives cap M24217/1-046 an outside diameter A of 4.160 over 4.105, a .055 band, and cap M24217/1-050 3.390 over 3.360, a .030 band; the other nine caps have a .020 band. The model builds A at the middle of the printed limits; the engineer should confirm these two rows."
   ]
  },
  {
   "id": "MIL-C-24217/4(SH)",
   "slug": "mil-c-24217-4-sh",
   "title": "Receptacle assembly (mid-flanged bolted type)",
   "class": "Virginia",
   "folder": "Virginia/MIL-C-24217_4(SH) Receptacle assembly, mid-flanged bolted type",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 7,
   "solids": 14,
   "dimensions": 126,
   "dimensions_met": 126,
   "kind": "Military specification sheet",
   "dated": "5 September 1984",
   "status": "Active, 13 March 2020",
   "newest": "Notice 2 - Validation, 13 March 2020",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-593-1121, connector, receptacle, electrical, M24217/4-011 (Virginia)"
   ],
   "files": {
    "package": "MIL-C-24217_4(SH) package.pdf",
    "scan": "MIL-C-24217_4(SH) legacy scan.pdf",
    "clean": "MIL-C-24217_4(SH) clean copy.pdf",
    "record": "MIL-C-24217_4(SH) validation record.pdf",
    "sheet": "MIL-C-24217_4(SH) 3D model.pdf",
    "parts": "MIL-C-24217_4(SH) parts list.pdf",
    "inspection": "MIL-C-24217_4(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 2, page 3",
   "pictures": {
    "iso": "Models/views/M24217_4-029-freecad.png",
    "pair": "Models/views/M24217_4-029-pair.png",
    "record": "Models/views/M24217_4-029-record.png",
    "front": "Models/views/M24217_4-029-front.png",
    "top": "Models/views/M24217_4-029-top.png",
    "right": "Models/views/M24217_4-029-right.png",
    "cut": "Models/views/M24217_4-029-cut.png"
   },
   "shown_part": "M24217/4-029",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 14 mid-flanged receptacle shells M24217/4-025 to -038: front barrel W by X, bolting flange T with six .221 holes on the Y bolt circle, and rear barrel V with an O-ring groove at root diameter U.",
   "not_modeled": [
    "Shell bore, insert, contacts, face seal and polarizing key (defined in MIL-C-24217/1)",
    "Flange face O-ring groove (detail N.T.S., no lettered diameters), coupling thread on the front barrel and relief to root diameter",
    "Geometric tolerances (TIR, parallelism, flatness, perpendicularity) and surface finish",
    "Bulkhead opening of Figure 3 / Table III (installation detail, information only), protective cap and O-rings"
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, all scanned. SHA-256 6214fa5b9dcc.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "334 of 347 items agreed. 15 differences went to a third reader. A second pass settled 4 from a second printing in the document, 1 from the same value on another sheet of the series, 1 from the sheet's layout (a point the scan did not print). 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "160 checks on size series and limits. 12 breaks checked against the scan: all are as printed. 14 values are also printed on 2 other sheets of the series: 13 match, 1 differs as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (532 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "14 solids in STEP AP242. 126 of 126 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Notice 2 - Validation, 13 March 2020.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 2, callouts .155/.175, .111/.115 and .290/.300: read as .155, .175, .111, .115, .290, .300, could be .156, .179, .111, .118, .298, .310.",
    "Differs within the series. Protective cap part number, 012: M24217/1-049 here; MIL-C-24217/1 prints M24217/1-048. For the 3 NO. 4 receptacle MIL-C-24217/1 prints M24217/1-048 on page 2 (the last digit has two closed bowls, like the 8 in the row above and unlike the 9 in the rows for -010 and -013) and MIL-C-24217/4 prints M24217/1-049 on page 2. Table III of MIL-C-24217/1 (page 6) lists 3 NO 4 under cap M24217/1-049, whose 2-1/2 thread is the thread of the 3 NO. 4 shell; cap -048 has a 2-1/8 thread.",
    "Model. Figure 2 gives no length for the barrel behind the flange and no overall shell length. The solids use 1.10 in, scaled from the drawing; the engineer must supply the length from MIL-C-24217/1 or the shell drawing.",
    "Model. Table II prints V for M24217/4-031 as 3.495 and 3.491, which is U plus .217; the other thirteen shells print V as U plus .219. Both values are clear on page 4; the engineer should confirm V for this shell."
   ]
  },
  {
   "id": "MIL-C-85049A",
   "slug": "mil-c-85049a",
   "title": "Connector accessories, electrical general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-C-85049A Connector accessories, electrical general specif",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 56,
   "solids": 70,
   "dimensions": 948,
   "dimensions_met": 946,
   "kind": "Military specification",
   "dated": "30 August 1990",
   "status": "Canceled, 19 June 2003",
   "newest": "Revision A Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-C-85049A package.pdf",
    "scan": "MIL-C-85049A legacy scan.pdf",
    "clean": "MIL-C-85049A clean copy.pdf",
    "record": "MIL-C-85049A validation record.pdf",
    "sheet": "MIL-C-85049A 3D model.pdf",
    "parts": "MIL-C-85049A parts list.pdf",
    "inspection": "MIL-C-85049A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 5, page 45",
   "pictures": {
    "iso": "Models/views/M85049_dummy_fixture_Fig_5_-08-freecad.png",
    "pair": "Models/views/M85049_dummy_fixture_Fig_5_-08-pair.png",
    "record": "Models/views/M85049_dummy_fixture_Fig_5_-08-record.png",
    "front": "Models/views/M85049_dummy_fixture_Fig_5_-08-front.png",
    "top": "Models/views/M85049_dummy_fixture_Fig_5_-08-top.png",
    "right": "Models/views/M85049_dummy_fixture_Fig_5_-08-right.png",
    "cut": "Models/views/M85049_dummy_fixture_Fig_5_-08-cut.png"
   },
   "shown_part": "M85049 dummy fixture Fig 5 -08",
   "application": "FreeCAD 1.1.4",
   "modeled": "Accessory coupling-end interfaces from Figures 2-4 (Tables VIII, IX, X) and dummy connector test fixtures from Figures 5-7 (Tables XI, XII/XIII, XIV), one solid per table row; Figure 3, 6 and Table IX/XII/XIII parts are built and checked in millimetres, the rest in inches.",
   "not_modeled": [
    "The rest of each accessory (backshell body, cable clamp, seals, accessory nut as a separate part) is defined by the M85049 slash sheets, not this specification; the coupling ends are interface envelopes with one-piece nut and sleeve.",
    "Detail B optional 34 deg front design for sleeve sizes 24 and 25, the Figure 4 .070/.090 nut section, and the master polarizing key or keyway of Figure 7 are not modeled.",
    "Tooth tip and root radii (.010 R, .020 R, .016 R, .41 R, .50 R, .25 R, .005 R, .025/.005 R), the Detail C bore-edge chamfer and land, the 7-10 deg sealing face, and thread chamfers to the root of the first thread are not modeled.",
    "Thread form, pitch, class and plating allowance are not modeled; Figure 1 bending-moment setup and the cable-range tables carry no part geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "56 pages, all scanned. SHA-256 9e963c5c0ee7.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "8,264 of 9,853 items agreed. All 76 differences were settled against the page image. A second pass settled 1 from another revision, 5 from a second printing in the document, 1 from the document's record in ASSIST, 1 from a closer look at the page, 1 from the sheet's layout (a point the scan did not print). 1 value that the scan prints in a doubtful form is listed for the engineer.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "2,175 checks on size series and limits. 45 breaks checked against the scan: all are as printed. 32 values are also printed on 9 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "39 pages of searchable text, 22 tables (4,495 cells), 7 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "70 solids in STEP AP242. 946 of 948 stated dimensions measure within limits; 2 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 1 - Cancellation, 19 June 2003.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Tables VI and VII, footnote 1/: \"Self-locking is available as an Air Force 00 slash sheet.\" This typeface prints its zero and its capital O alike, so the two characters may be the letters OO.",
    "Printed value to confirm. Table XIV, dash 03: GG is printed as .509, smaller than the V thread .5625-24 UNEF in the same row. The rows from dash 08 to dash 48 print GG at the thread size.",
    "Printed value to confirm. Table XIV, dash 61: GG is printed as 1.427, smaller than the V thread 1.500-18 UNEF in the same row, as in dash 03.",
    "Model. Table XI, dash 24, prints the PP diameter as 1.360 \u00b1.003, larger than the HH diameter 1.359 +.001 -.005, so the projections of Figure 5 have no face to stand on. The engineer must decide which value is wrong.",
    "Model. Figure 3 prints the distance from the front of the accessory to the serrations as 6 29 \u00b1.38, with a gap where a decimal point would stand. The solids are built at 6.29 mm and the engineer should confirm the value."
   ]
  },
  {
   "id": "MIL-C-85049/10A",
   "slug": "mil-c-85049-10a",
   "title": "Connector accessories, electrical, backshell, environmental, cable sealing, straight, shield termination, category 1A (for MIL-C-5015 crimp, MIL-C-26482 series 2, MIL-C-81703 series 3, and MIL-C-83723 series III connectors)",
   "class": "Virginia",
   "folder": "Virginia/MIL-C-85049_10A Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 22,
   "solids": 157,
   "dimensions": 1626,
   "dimensions_met": 1608,
   "kind": "Military specification sheet",
   "dated": "30 November 1990",
   "status": "Canceled, 19 June 2003",
   "newest": "Revision A Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/10",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5935-01-515-0476, backshell, electrical connector, M85049/10-94W (Virginia)",
    "5935-01-518-3895, backshell, electrical connector, M85049/10-25S (Seawolf)"
   ],
   "files": {
    "package": "MIL-C-85049_10A package.pdf",
    "scan": "MIL-C-85049_10A legacy scan.pdf",
    "clean": "MIL-C-85049_10A clean copy.pdf",
    "record": "MIL-C-85049_10A validation record.pdf",
    "sheet": "MIL-C-85049_10A 3D model.pdf",
    "parts": "MIL-C-85049_10A parts list.pdf",
    "inspection": "MIL-C-85049_10A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85049_10-37-freecad.png",
    "pair": "Models/views/M85049_10-37-pair.png",
    "record": "Models/views/M85049_10-37-record.png",
    "front": "Models/views/M85049_10-37-front.png",
    "top": "Models/views/M85049_10-37-top.png",
    "right": "Models/views/M85049_10-37-right.png",
    "cut": "Models/views/M85049_10-37-cut.png"
   },
   "shown_part": "M85049/10-37",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 157 MIL-C-85049/10A straight shield-termination backshells (Style 1 and Style 2): coupling nut, sleeve or adapter transition, V thread rear adapter and wire passage, sized to Table I.",
   "not_modeled": [
    "The coupling nut interface and internal thread (MIL-C-85049 figure 4), the ferrules, O-rings, grommet and grommet follower.",
    "The cable clamp (MIL-C-85049/42), the three .020 safety wire holes and the marking.",
    "Finish codes N, W, B and S (Table II), which do not change geometry; one solid per dash number."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "22 pages, all scanned. SHA-256 caf499288784.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,781 of 2,786 items agreed. All 10 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1,931 checks on size series and limits. 124 breaks checked against the scan: all are as printed. 49 values are also printed on 9 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 4 tables (3,013 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "157 solids in STEP AP242. 1,608 of 1,626 stated dimensions measure within limits; 18 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 1 - Cancellation, 19 June 2003.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, dash numbers 118 and 119 (page 12): the clamp size is printed 16, but the wire bundle range .350 to .625, C ref 1.844 and V thread 1.000-20 UNEF on these rows are the clamp size 10 values everywhere else in the table. The 1980 edition printed 10.",
    "Model. On dash numbers 61, 62 and 65 to 80, B plus C ref is longer than G max by .404 to .730, although Figure 1 draws G as B plus C; G max and H max fit the C ref of the 1980 edition (1.500, 1.375, 1.781, 1.830), not the 2.024, 2.230, 2.550, 2.600 printed here. An engineer must decide which governs; the solids keep G max and H max and shorten C.",
    "Model. Table I gives E ref 2.87 for dash number 20 and 2.97 for dash number 127; the rows beside them give B minus 1.08 (2.67 and 2.92), as the 1980 edition printed. An engineer must decide which apply; the solids use the printed values, which the conversion table on page 18 repeats."
   ]
  },
  {
   "id": "MIL-C-85049/24A",
   "slug": "mil-c-85049-24a",
   "title": "Connector accessories, electrical, backshell, nonenvironmental, 90\u00b0, shield termination, category 3A (for MIL-C-5015 crimp, MIL-C-26482 series 2, MIL-C-81703 series 3, and MIL-C-83723 series III connectors)",
   "class": "Virginia",
   "folder": "Virginia/MIL-C-85049_24A Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 13,
   "solids": 75,
   "dimensions": 534,
   "dimensions_met": 534,
   "kind": "Military specification sheet",
   "dated": "30 November 1990",
   "status": "Canceled, 19 June 2003",
   "newest": "Revision A Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/24",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-01-555-4057, backshell, electrical connector, M85049/24-6N (Virginia)",
    "5935-01-493-8549, backshell, electrical connector, M85049/24-75W (Los Angeles)"
   ],
   "files": {
    "package": "MIL-C-85049_24A package.pdf",
    "scan": "MIL-C-85049_24A legacy scan.pdf",
    "clean": "MIL-C-85049_24A clean copy.pdf",
    "record": "MIL-C-85049_24A validation record.pdf",
    "sheet": "MIL-C-85049_24A 3D model.pdf",
    "parts": "MIL-C-85049_24A parts list.pdf",
    "inspection": "MIL-C-85049_24A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/M85049_24-37-freecad.png",
    "pair": "Models/views/M85049_24-37-pair.png",
    "record": "Models/views/M85049_24-37-record.png",
    "front": "Models/views/M85049_24-37-front.png",
    "top": "Models/views/M85049_24-37-top.png",
    "right": "Models/views/M85049_24-37-right.png",
    "cut": "Models/views/M85049_24-37-cut.png"
   },
   "shown_part": "M85049/24-37",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 75 MIL-C-85049/24A backshells (Style 1 and Style 2, 90 degree): coupling nut, elbow body, Style 2 adapter transition and V thread, sized to Table I.",
   "not_modeled": [
    "The saddle clamp (MIL-C-85049/42), its length C (ref) and the wire bundle range A.",
    "The ferrule, the second coupling nut on the Style 2 sleeve, safety wire holes, marking and the internal bore and interface (MIL-C-85049 figure 4).",
    "Finish codes N, W, B and S (Table II), which do not change geometry; one solid per dash number."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "13 pages, all scanned. SHA-256 7c914e8df257.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,696 of 1,861 items agreed. All 169 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "886 checks on size series and limits. 21 breaks checked against the scan: all are as printed. 828 values are also printed on 9 other sheets of the series: 824 match, 4 differ as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 13 tables (1,664 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "75 solids in STEP AP242. 534 of 534 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 1 - Cancellation, 19 June 2003.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, dash number 48 (shell size 40), page 6: E is printed 1.816 with F max 3.88. The other shell size 40 rows with F max 3.88 print E 2.566, and 1.816 is the E of the shell size 36 rows.",
    "Printed value to confirm. Table I, dash number 53 (shell size 61), page 7: D dia max is printed 1.863. Dash numbers 38 and 39 on page 5 print 1.653 for the same shell size.",
    "Differs within the series. D diameter, maximum, by dash number, 53: 1.863 here; MIL-C-85049/7 prints 1.653. MIL-C-85049/7 prints 1.653 on page 7; MIL-C-85049/24 prints 1.863 on page 7. Both are clear. MIL-C-85049/10 prints 1.653 for the same shell (MIL-C-81703 size 61) four times on page 12.",
    "Differs within the series. V thread, by dash number, 18: 1.750-10UNS here; MIL-C-85049/7 prints 1.750-18UNS. MIL-C-85049/7 prints 1.750-18 UNS on page 3; MIL-C-85049/24 prints 1.750-10 UNS on page 3, with 1.750-18 UNS two rows below for dash 20. Both are clear. Every other clamp size 20 row on the three sheets prints 1.750-18 UNS.",
    "Differs within the series. V thread, by dash number, 28: 2.500-18UN here; MIL-C-85049/7 prints 2.500-16UN. MIL-C-85049/7 prints 2.500-16 UN on page 4; MIL-C-85049/24 prints 2.500-18 UN on page 4. Both are clear. Every other clamp size 32 row on the three sheets prints 2.500-16 UN.",
    "Differs within the series. D diameter, maximum, by MIL-C-81703 Series 3 shell size, 61: 1.863 here; MIL-C-85049/7 prints 1.653, MIL-C-85049/10 prints 1.653. The same cell as dash 53: MIL-C-85049/24 prints 1.863 on page 7 (its dash 38 and 39 print 1.653); MIL-C-85049/7 page 7 and MIL-C-85049/10 page 12 print 1.653. All are clear."
   ]
  },
  {
   "id": "MIL-C-85049/5B",
   "slug": "mil-c-85049-5b",
   "title": "Connector accessories, electrical, backshell, cable sealing, straight, step-down, category 1A (for MIL-C-22992 connectors, classes C, J, and R)",
   "class": "Virginia",
   "folder": "Virginia/MIL-C-85049_5B Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 110,
   "dimensions": 1120,
   "dimensions_met": 1113,
   "kind": "Military specification sheet",
   "dated": "24 November 1992",
   "status": "Canceled, 19 June 2003",
   "newest": "Revision B Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/5",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-515-4175, backshell, electrical connector, M85049/5A19A1 (Virginia)"
   ],
   "files": {
    "package": "MIL-C-85049_5B package.pdf",
    "scan": "MIL-C-85049_5B legacy scan.pdf",
    "clean": "MIL-C-85049_5B clean copy.pdf",
    "record": "MIL-C-85049_5B validation record.pdf",
    "sheet": "MIL-C-85049_5B 3D model.pdf",
    "parts": "MIL-C-85049_5B parts list.pdf",
    "inspection": "MIL-C-85049_5B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 7",
   "pictures": {
    "iso": "Models/views/M85049_5W41A3-freecad.png",
    "pair": "Models/views/M85049_5W41A3-pair.png",
    "record": "Models/views/M85049_5W41A3-record.png",
    "front": "Models/views/M85049_5W41A3-front.png",
    "top": "Models/views/M85049_5W41A3-top.png",
    "right": "Models/views/M85049_5W41A3-right.png",
    "cut": "Models/views/M85049_5W41A3-cut.png"
   },
   "shown_part": "M85049/5W41A3",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 110 MIL-C-85049/5 backshell bodies (48 style 1, 20 style 2 and 42 style 3 sizes), each one solid of nut, gland housing and coupling end with the cable bore and the coupling thread bore, plus the cable grip for style 3.",
   "not_modeled": [
    "The plug and receptacle caps (MS17350 type A, MS17349 type B), their L threads, N and P dimensions and the Q chain are not modeled; type A and type B accessories share one body solid, shown as type A.",
    "Finish A and finish W share one solid, shown as finish W.",
    "The gland, gland washer and sealing washer are internal rubber and metal parts with no stated dimensions; the nut and housing are one solid with no thread between them.",
    "The style 2 gland thread VV and the internal housing shape between the nut and the sealing washer are not modeled.",
    "The optional .062 marking band, chain attachment lugs, knurling and clamp screws are not modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, all scanned. SHA-256 6f6b1fb68fdf.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,390 of 3,147 items agreed. All 700 differences were settled against the page image. A second pass settled 312 from a second printing in the document, 74 from another revision, 2 from a closer look at the page.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1,851 checks on size series and limits. 55 breaks checked against the scan: all are as printed. A later review settled 1 printed value from another revision, 2 printed values from the document's own conversions.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 10 tables (2,599 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "110 solids in STEP AP242. 1,113 of 1,120 stated dimensions measure within limits; 7 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 1 - Cancellation, 19 June 2003. ASSIST also holds Revision B Amendment 1 (26 March 1997). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Style 2 sizes 7, 8 and 9 (page 5): thread D 1.6250-18 NEF as printed is larger than coupling end G; the 1980 base document prints 1.2500-18 NEF and 1.3750-18 NEF. Decide which D applies.",
    "Model. Style 2 sizes 13 and 14: thread D 1.6250-18 as printed is smaller than bore T 1.713; the 1980 base document prints 1.8750-18 UN. Decide which D applies.",
    "Model. Style 2 sizes 15 and 16: G 2.062 as printed leaves no wall over D 2.0625-16 N; the 1980 base document prints G 2.312. Decide which G applies.",
    "Model. Style 2 sizes 5 and 6 (page 5): coupling thread D is printed 1.0000-20 UNEF and 1.3750-18 UNEF, where the 1980 base document prints 1.1250-18 NEF and 1.2500-18 NEF. The solids are built as printed; the engineer must confirm both threads.",
    "Model. Style 2 size 1 J is printed 1.100 on page 5 and style 3 size 29 E is printed .597 on page 10, where the earlier revisions print 1.000 and .539. The solids are built as printed; the engineer must confirm both.",
    "Model. Style 2 (page 6): the T diameter column is headed \u00b1.055, where Revision A and the 1980 base document print \u00b1.005. The check on T uses \u00b1.055 as printed; the engineer must confirm the tolerance.",
    "Model. Not modeled, and printed differently in Revision A: cap thread L for style 1 sizes 7 and 8 (page 3) and style 2 size 3 (page 6), gland thread VV for style 2 size 20 (page 6: 2.5005-16 UN against 2.5000-16 UN), and the thread series of D for style 3 sizes 15 to 21 (page 8: UNEF against UN). The engineer must confirm each."
   ]
  },
  {
   "id": "MIL-C-85049/78",
   "slug": "mil-c-85049-78",
   "title": "Connector accessories, electrical, backshell, environmental, 45\u00b0, shield termination, category 2B, nonself-locking (MIL-C-38999 series III and IV connectors)",
   "class": "Virginia",
   "folder": "Virginia/MIL-C-85049_78 Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 84,
   "dimensions": 924,
   "dimensions_met": 924,
   "kind": "Military specification sheet",
   "dated": "28 August 1989",
   "status": "Canceled, 19 June 2003",
   "newest": "Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/78",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-590-7748, backshell, electrical connector, M85049/78-15W04 (Virginia)"
   ],
   "files": {
    "package": "MIL-C-85049_78 package.pdf",
    "scan": "MIL-C-85049_78 legacy scan.pdf",
    "clean": "MIL-C-85049_78 clean copy.pdf",
    "record": "MIL-C-85049_78 validation record.pdf",
    "sheet": "MIL-C-85049_78 3D model.pdf",
    "parts": "MIL-C-85049_78 parts list.pdf",
    "inspection": "MIL-C-85049_78 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85049_78-17W04-freecad.png",
    "pair": "Models/views/M85049_78-17W04-pair.png",
    "record": "Models/views/M85049_78-17W04-record.png",
    "front": "Models/views/M85049_78-17W04-front.png",
    "top": "Models/views/M85049_78-17W04-top.png",
    "right": "Models/views/M85049_78-17W04-right.png",
    "cut": "Models/views/M85049_78-17W04-cut.png"
   },
   "shown_part": "M85049/78-17W04",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 45 degree environmental backshell for every shell size, clamp size and finish letter (84 part numbers), each a coupling ring, a straight adapter tube, a 45 degree leg and a loosely assembled clamp with lugs and a wire bundle passage.",
   "not_modeled": [
    "Accessory front end interface (coupling thread, teeth, O-ring grooves) per MIL-C-38999 series III and IV accessory interface dimensions.",
    "Grommet, O-rings, shield termination cone, fillister head screws and lock washers as separate parts, and the grommet sealing bore.",
    "Knurling, marking and finish; finish N and W part numbers share one geometry.",
    "Captive, free-rotating coupling nut: ring and adapter are one solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 5b73a0e05171.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "460 of 478 items agreed. All 17 differences were settled against the page image. A second pass settled 2 from a second printing in the document. 3 marks outside the technical content are kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "17 checks on size series and limits. None failed. 48 values are also printed on 9 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (103 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "84 solids in STEP AP242. 924 of 924 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Notice 1 - Cancellation, 19 June 2003. ASSIST also holds Amendment 1 (30 July 1997). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. L REF minus D, the interface length in figure 1, is .35 for shell size 09 (3.20 and 2.85, in inches and millimetres alike) and .32 for the other eight sizes; MIL-C-85049/79 prints .35 for every size. The engineer must confirm the interface length against the MIL-C-38999 accessory interface dimensions.",
    "Model. Figure 1 draws D to the rear lug of the clamp, but table I gives one D \u00b1.062 for each shell size while Y max in table II runs from 1.20 to 1.90 across the clamp sizes of shell size 25, which moves that lug by about .25. The engineer must decide which point D is measured to, or which clamp size it applies to; the solids reach D with the clamp nut."
   ]
  },
  {
   "id": "MIL-C-85049/79",
   "slug": "mil-c-85049-79",
   "title": "Connector accessories, electrical, backshell, environmental, 90\u00b0, shield termination, category 2B, nonself-locking (MIL-C-38999 series III and IV connectors)",
   "class": "Virginia",
   "folder": "Virginia/MIL-C-85049_79 Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 42,
   "dimensions": 378,
   "dimensions_met": 378,
   "kind": "Military specification sheet",
   "dated": "28 August 1989",
   "status": "Canceled, 19 June 2003",
   "newest": "Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/79",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-515-4232, backshell, electrical connector, M85049/79-21W04 (Virginia)"
   ],
   "files": {
    "package": "MIL-C-85049_79 package.pdf",
    "scan": "MIL-C-85049_79 legacy scan.pdf",
    "clean": "MIL-C-85049_79 clean copy.pdf",
    "record": "MIL-C-85049_79 validation record.pdf",
    "sheet": "MIL-C-85049_79 3D model.pdf",
    "parts": "MIL-C-85049_79 parts list.pdf",
    "inspection": "MIL-C-85049_79 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85049_79-19W07-freecad.png",
    "pair": "Models/views/M85049_79-19W07-pair.png",
    "record": "Models/views/M85049_79-19W07-record.png",
    "front": "Models/views/M85049_79-19W07-front.png",
    "top": "Models/views/M85049_79-19W07-top.png",
    "right": "Models/views/M85049_79-19W07-right.png",
    "cut": "Models/views/M85049_79-19W07-cut.png"
   },
   "shown_part": "M85049/79-19W07",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-C-85049/79 90 degree backshell for all 42 accessory shell size and clamp size combinations in Table I (finish W): coupling ring of diameter A and length .660 on the connector axis, adapter body behind it turning down into a leg whose far side lies at D from the interface length line, and clamp of width Y on the clamp axis at B, with overall height C and a clamp opening at the wire bundle maximum of Table II.",
   "not_modeled": [
    "Accessory front end and coupling thread, which the sheet refers to the MIL-C-38999 accessory interface dimensions; the ring and body are solid envelopes without the connector bore.",
    "Three safety wire holes for .020 wire in the coupling ring (View Z-Z), which the sheet does not size or locate.",
    "O-rings, grommet, fillister head clamp screws with lock washers, knurl and marking.",
    "The separate coupling nut, adapter body and clamp parts: the coupling ring, body and clamp are fused into one envelope solid.",
    "Finish N parts, which are the same geometry as the finish W parts modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 e40e15697d2b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "420 of 478 items agreed. All 58 differences were settled against the page image. A second pass settled 1 from a second printing in the document.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "17 checks on size series and limits. None failed. 48 values are also printed on 9 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (103 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "42 solids in STEP AP242. 378 of 378 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Notice 1 - Cancellation, 19 June 2003. ASSIST also holds Amendment 1 (30 July 1997) and Amendment 2 (8 August 1999). They were issued after this revision and are not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 gives C from the dashed outline at the top of the body to the bottom of the clamp and draws that outline just below the top of the coupling ring, but no dimension places either end of C from the connector centerline. The solids put the top of the body level with the top of the ring; the engineer must decide where the body sits on the centerline.",
    "Model. Page 5 gives the configuration and dimensions as 'figure 1, and tables III and IV' and the interface dimensions as MIL-C-38999 'series I and II', but this sheet has only tables I and II and its title covers series III and IV connectors; MIL-C-85049/78 of the same date prints 'tables I and II' and 'series III and IV'. The engineer must confirm that tables I and II and the series III and IV interface apply.",
    "Model. Amendment 2 of 8 August 1999 deletes Table I and substitutes new values for every shell size, with B \u00b10.156, C \u00b10.188 and D as a maximum (size 09: B 0.532, C 3.267, D 1.19, L 1.48, where this sheet prints .438, 3.141, .968 and 1.32). The solids follow the 28 August 1989 table digitized here; the engineer must decide which table governs the parts in hand."
   ]
  },
  {
   "id": "MIL-C-85049/7A",
   "slug": "mil-c-85049-7a",
   "title": "Connector accessories, electrical, backshell, environmental, cable sealing, 45\u00b0, category 1A (for MIL-C-5015 crimp, MIL-C-26482 series 2, MIL-C-81703 series 3, and MIL-C-83723 series III connectors)",
   "class": "Virginia",
   "folder": "Virginia/MIL-C-85049_7A Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 13,
   "solids": 75,
   "dimensions": 834,
   "dimensions_met": 834,
   "kind": "Military specification sheet",
   "dated": "30 November 1990",
   "status": "Canceled, 19 June 2003",
   "newest": "Revision A Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/7",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-515-4199, backshell, electrical connector, M85049/7-49W (Virginia)"
   ],
   "files": {
    "package": "MIL-C-85049_7A package.pdf",
    "scan": "MIL-C-85049_7A legacy scan.pdf",
    "clean": "MIL-C-85049_7A clean copy.pdf",
    "record": "MIL-C-85049_7A validation record.pdf",
    "sheet": "MIL-C-85049_7A 3D model.pdf",
    "parts": "MIL-C-85049_7A parts list.pdf",
    "inspection": "MIL-C-85049_7A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85049_7-50-freecad.png",
    "pair": "Models/views/M85049_7-50-pair.png",
    "record": "Models/views/M85049_7-50-record.png",
    "front": "Models/views/M85049_7-50-front.png",
    "top": "Models/views/M85049_7-50-top.png",
    "right": "Models/views/M85049_7-50-right.png",
    "cut": "Models/views/M85049_7-50-cut.png"
   },
   "shown_part": "M85049/7-50",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 75 MIL-C-85049/7A 45 degree backshells (Style 1 and Style 2): coupling nut, elbow body, V thread leg, clamp envelope and wire passage, sized to Table I.",
   "not_modeled": [
    "The coupling nut interface and internal thread (MIL-C-85049 figure 4), the O-ring, sleeve, grommet and grommet follower.",
    "Clamp details (MIL-C-85049/42), the safety wire holes and boss, and the marking.",
    "Finish codes N, W, B and S (Table II), which do not change geometry; one solid per dash number."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "13 pages, all scanned. SHA-256 bdfa9f86cf69.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "822 of 1,827 items agreed. All 30 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "895 checks on size series and limits. 32 breaks checked against the scan: all are as printed. 828 values are also printed on 9 other sheets of the series: 825 match, 3 differ as printed. A later review settled 1 printed value from the document's own conversions.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 7 tables (1,712 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "75 solids in STEP AP242. 834 of 834 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 1 - Cancellation, 19 June 2003.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Differs within the series. D diameter, maximum, by dash number, 53: 1.653 here; MIL-C-85049/24 prints 1.863. MIL-C-85049/7 prints 1.653 on page 7; MIL-C-85049/24 prints 1.863 on page 7. Both are clear. MIL-C-85049/10 prints 1.653 for the same shell (MIL-C-81703 size 61) four times on page 12.",
    "Differs within the series. V thread, by dash number, 18: 1.750-18UNS here; MIL-C-85049/24 prints 1.750-10UNS. MIL-C-85049/7 prints 1.750-18 UNS on page 3; MIL-C-85049/24 prints 1.750-10 UNS on page 3, with 1.750-18 UNS two rows below for dash 20. Both are clear. Every other clamp size 20 row on the three sheets prints 1.750-18 UNS.",
    "Differs within the series. V thread, by dash number, 28: 2.500-16UN here; MIL-C-85049/24 prints 2.500-18UN. MIL-C-85049/7 prints 2.500-16 UN on page 4; MIL-C-85049/24 prints 2.500-18 UN on page 4. Both are clear. Every other clamp size 32 row on the three sheets prints 2.500-16 UN.",
    "Model. Figure 1 letters the Style 2 outside diameter F, but Table I gives F max as a length and gives G dia max only for Style 2. The 1980 issue letters it G; the solids use G dia max, and the engineer must confirm it."
   ]
  },
  {
   "id": "MIL-DTL-16377/11C(SH)",
   "slug": "mil-dtl-16377-11c-sh",
   "title": "Fixtures, lighting; fluorescent and ssl equivalent, general lighting, 40 watts, 120 volts, 60 hertz, watertight, symbols 77.4, 77.5, 344.2, 344.3, 77.4SSL, 77.5SSL, 344.2SSL, and 344.3SSL",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-16377_11C(SH) Fixtures, lighting",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 11,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "30 June 2014",
   "status": "Active, 21 July 2021",
   "newest": "Revision C Notice 1 - Validation, 21 July 2021",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 2
   },
   "stock_examples": [
    "6210-01-511-3242, fixture, lighting, M16377/11-77.4-S-MOD (Virginia)",
    "6210-01-511-3251, fixture, lighting, M16377/11-77.4GW (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-16377_11C(SH) package.pdf",
    "scan": "MIL-DTL-16377_11C(SH) legacy scan.pdf",
    "clean": "MIL-DTL-16377_11C(SH) clean copy.pdf",
    "record": "MIL-DTL-16377_11C(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "11 pages, 3 scanned. SHA-256 fa8603e5e5e3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,283 of 1,331 items agreed. All 16 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "80 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 6 tables (374 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-16377/11C(SH) is a specification sheet for 40-watt watertight fluorescent and SSL general lighting fixtures, symbols 77.4, 77.5, 344.2, 344.3 and their SSL equivalents, that sets classification, electrical rating, photometric data (Figure 4, Table I), standard parts (Table II), weight, labels, inspections (Tables III to V) and part numbers (Table VI), and sends dimensions and configuration to figure 10 of MIL-DTL-16377 and mounting to its figures 25 and 26; its Figures 1 to 3 are typical views that give only the inside window seat (7.261 to 7.344 by 28.672 to 28.719), a 3-27/32 maximum height, the window depth, lamp spacing, a 1/8 minimum and a 2-1/2 reference height, with no enclosure length, width, wall or flange dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 1 - Validation, 21 July 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-16377/12C(SH)",
   "slug": "mil-dtl-16377-12c-sh",
   "title": "Fixtures, lighting; fluorescent and ssl equivalent, general lighting, 60 watts, 120 volts, 60 hertz, watertight, symbols 333.1, 333.2, 341.1, 341.2, 342.2, 342.3, 333.1SSL, 333.2SSL, 341.1SSL, 341.2SSL, 342.2SSL, and 342.3SSL",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-16377_12C(SH) Fixtures, lighting",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 18,
   "solids": 6,
   "dimensions": 180,
   "dimensions_met": 179,
   "kind": "Detail specification sheet",
   "dated": "30 June 2014",
   "status": "Active, 21 July 2021",
   "newest": "Revision C Notice 1 - Validation, 21 July 2021",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 3,
   "by_class": {
    "Virginia": 2,
    "Ohio": 1
   },
   "stock_examples": [
    "6210-01-510-9560, fixture, lighting, M16377/12 (Virginia)",
    "6230-01-511-3265, light, bed, M16377/12-341.1-G-W-SS-MOD (Virginia)",
    "6210-01-529-8115, fixture, lighting, M16377/12-333.1RW (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-16377_12C(SH) package.pdf",
    "scan": "MIL-DTL-16377_12C(SH) legacy scan.pdf",
    "clean": "MIL-DTL-16377_12C(SH) clean copy.pdf",
    "record": "MIL-DTL-16377_12C(SH) validation record.pdf",
    "sheet": "MIL-DTL-16377_12C(SH) 3D model.pdf",
    "parts": "MIL-DTL-16377_12C(SH) parts list.pdf",
    "inspection": "MIL-DTL-16377_12C(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M16377_12-003_short_louver-freecad.png",
    "pair": "Models/views/M16377_12-003_short_louver-pair.png",
    "record": "Models/views/M16377_12-003_short_louver-record.png",
    "front": "Models/views/M16377_12-003_short_louver-front.png",
    "top": "Models/views/M16377_12-003_short_louver-top.png",
    "right": "Models/views/M16377_12-003_short_louver-right.png",
    "cut": "Models/views/M16377_12-003_short_louver-cut.png"
   },
   "shown_part": "M16377/12-003 short louver",
   "application": "FreeCAD 1.1.4",
   "modeled": "Six solids for window assembly M16377/12-003: the formed acrylic window of figure 8 with its counterbored holes, and the five louver parts of figure 9 (short louver, long louver, mounting bracket, reinforcing bracket and louver frame), each modeled alone.",
   "not_modeled": [
    "The parts are not assembled: the louver grid (44 short and 12 long louvers, six mounting brackets, two reinforcing brackets and the frame), its rivets and welds, the 1/2 x 1/2 x 64 inch gasket, the louver's attachment to the window (3.7.6.2.2 of MIL-DTL-16377) and the four short securing screw assemblies (3.7.4.3) are not modeled.",
    "The window's clear area (22-1/2 \u00b11/16 by 7-11/16 \u00b11/16) and the black finish on both surfaces are a paint boundary, not a shape.",
    "The eight rim notches, filed only when required, are not modeled: figure 8 locates them (8-3/4, 9-1/32, 8-3/4, 4-33/64) and gives the 7/32 width, but their depth is left to 3.7.4.4 of MIL-DTL-16377.",
    "The rim flatness within 1/16, the 150 surface finish, the 1/64 edge break around the window and the hole edge breaks.",
    "The 6-32UNC-2B thread in the mounting bracket, and the bracket bend radii, which figure 9 does not give.",
    "The fixtures of figures 1 to 5 (envelope dimensions only, with construction per MIL-DTL-16377) and window assemblies M16377/12-001 and -004 (figure 27 of MIL-DTL-16377)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, 3 scanned. SHA-256 8252bfc3d925.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,068 of 2,204 items agreed. 36 differences went to a third reader. 4 readings remain open.",
     "result": "4 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "158 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "16 pages of searchable text, 7 tables (488 cells), 11 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "6 solids in STEP AP242. 179 of 180 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 1 - Validation, 21 July 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 1, callout, lower limit of the length inside at seat: read as 28.963, could be 28.953.",
    "Open reading. Figure 2, callout, vertical dimension at left: read as 1 33/64 \u00b11/32, could be 1 53/64 \u00b11/32.",
    "Open reading. Figure 4, callout, vertical dimension at left: read as 1 33/64 \u00b11/32, could be 1 53/64 \u00b11/32.",
    "Open reading. Figure 5, callout, height at left: read as 2 33/64 (REF), could be 2 53/64 (REF).",
    "Model. Figure 9 gives the louver frame 6-17/32 inside, but the short louvers that lie across it are 8-1/2 long with their outer slots 7-19/32 apart, and the 64 inch gasket matches the perimeter of a frame about 8-1/2 inside; the frame is modeled at 6-17/32 as printed, and the correct inside width needs to be confirmed."
   ]
  },
  {
   "id": "MIL-DTL-16377/17C(SH)",
   "slug": "mil-dtl-16377-17c-sh",
   "title": "Fixtures, lighting; fluorescent and solid-state equivalent, detail lighting for berths, 8 watts, 120 volts, 60 hertz, symbols 229.1, 231.1, 232.1, 229.1SSL, 231.1SSL, 232.1SSL, 229.1SSL-USB, 231.1SSL-USB, and 232.1SSL-USB",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-16377_17C(SH) Fixtures, lighting",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 13,
   "solids": 11,
   "dimensions": 292,
   "dimensions_met": 291,
   "kind": "Detail specification sheet",
   "dated": "26 May 2023",
   "status": "Active, 26 May 2023",
   "newest": "Revision C, 26 May 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "6230-01-510-9484, light, bed, M16377/17-232.1-MOD (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-16377_17C(SH) package.pdf",
    "scan": "MIL-DTL-16377_17C(SH) legacy scan.pdf",
    "clean": "MIL-DTL-16377_17C(SH) clean copy.pdf",
    "record": "MIL-DTL-16377_17C(SH) validation record.pdf",
    "sheet": "MIL-DTL-16377_17C(SH) 3D model.pdf",
    "parts": "MIL-DTL-16377_17C(SH) parts list.pdf",
    "inspection": "MIL-DTL-16377_17C(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/M16377_17-001-freecad.png",
    "pair": "Models/views/M16377_17-001-pair.png",
    "record": "Models/views/M16377_17-001-record.png",
    "front": "Models/views/M16377_17-001-front.png",
    "top": "Models/views/M16377_17-001-top.png",
    "right": "Models/views/M16377_17-001-right.png",
    "cut": "Models/views/M16377_17-001-cut.png"
   },
   "shown_part": "M16377/17-001",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the nine complete berth lights (the figure 2 body with the figure 5 tapped and back mounting holes, and on the three 231.1 symbols the figure 6 plate fitted to the top face), the -001 rail bracket with its U-bolt, and the -002 mounting plate.",
   "not_modeled": [
    "Everything inside the basic light (lamp or LED luminaire, lampholders, starter, ballast, reflector, receptacle or USB port, wiring) and the parts outside the envelope (toggle switch, cable and strain relief bushing).",
    "The rounded front, rounded corners and end caps of the enclosure, and the lamp cover details of section A-A (5/16 and 1-1/2); figure 2 does not dimension the enclosure's shape beyond its length, width and depth.",
    "The two -001 brackets on the 229.1, 229.1SSL and 229.1SSL-USB solids; the bracket is modeled as its own part number.",
    "The shallow offset along each long edge of the plate shown in the figure 6 edge view, and its 1/2 width.",
    "The bracket's curved web, the rim and slot of its flange, the U-bolt threads (1/4-20 UNC-2A, 7/8 long), and the nuts and lockwashers.",
    "The mounting hardware bag of figure 5 view c, the plug buttons, labels, material, finish, color, weight and the photometric and electrical requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "13 pages, 4 scanned. SHA-256 88caa402be78.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,352 of 1,370 items agreed. 12 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 4 tables (196 cells), 9 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "11 solids in STEP AP242. 291 of 292 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C, 26 May 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 8, Lower left corner of figure 8, below the switch wiring: read as , could be SH ...",
    "Model. Figure 6 prints the plate's overall length as 6-1/2 \u00b11/32, but the 8-1/4 from the plate centerline to the end lies within that dimension and ten .187 holes per row at 1-3/4 with 3/8 end distance span 16-1/2; the plate is modeled 16-1/2 long.",
    "Model. Figure 5 view a does not mark which bottom hole the 2-7/8 locates; the model takes the middle hole, as figure 6 draws it, because 1-1/8 plus 1-11/16 is 2-13/16, not 2-7/8.",
    "Model. Figure 3 does not fix how the two -001 brackets sit on the 1/4-20 back screws of the 229.1 (which way the flange and U-bolt face), so the 229.1 solids are the body without brackets."
   ]
  },
  {
   "id": "MIL-DTL-16377/42C(SH)",
   "slug": "mil-dtl-16377-42c-sh",
   "title": "Fixtures, lighting; filters, plastic, tubular shaped for fluorescent lamps",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-16377_42C(SH) Fixtures, lighting",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 16,
   "dimensions": 96,
   "dimensions_met": 96,
   "kind": "Detail specification sheet",
   "dated": "30 June 2014",
   "status": "Active, 24 February 2021",
   "newest": "Revision C Notice 1 - Validation, 24 February 2021",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1
   },
   "stock_examples": [
    "6210-01-510-9506, filter, indicator light, M16377/42-008 (Virginia)",
    "6210-01-498-8001, filter, indicator light, M16377/42-007 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-16377_42C(SH) package.pdf",
    "scan": "MIL-DTL-16377_42C(SH) legacy scan.pdf",
    "clean": "MIL-DTL-16377_42C(SH) clean copy.pdf",
    "record": "MIL-DTL-16377_42C(SH) validation record.pdf",
    "sheet": "MIL-DTL-16377_42C(SH) 3D model.pdf",
    "parts": "MIL-DTL-16377_42C(SH) parts list.pdf",
    "inspection": "MIL-DTL-16377_42C(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M16377_42-003-freecad.png",
    "pair": "Models/views/M16377_42-003-pair.png",
    "record": "Models/views/M16377_42-003-record.png",
    "front": "Models/views/M16377_42-003-front.png",
    "top": "Models/views/M16377_42-003-top.png",
    "right": "Models/views/M16377_42-003-right.png",
    "cut": "Models/views/M16377_42-003-cut.png"
   },
   "shown_part": "M16377/42-003",
   "application": "FreeCAD 1.1.4",
   "modeled": "Sixteen acrylic filter tubes, one per Table I part number: the four 8-watt T5 tubes of Figure 1 with the slotted end, and the twelve plain T12 and T8 tubes of Figure 2 at their Table I lengths.",
   "not_modeled": [
    "The end labels (Type IV, 3/8 high; 2 to 2-1/4 long on the T5 tube, 4 to 4-1/2 long at each end of the T12 and T8 tubes) and their printing, including the instruction to wrap each lamp end with black electrical tape.",
    "Material (heat-resistant acrylic), color and luminous transmittance per MIL-DTL-24191, and the anti-static coating on the outside of the tubes.",
    "The general tolerances of 3.5.2 of MIL-DTL-16377 that apply to the slot depth and corner radius; those two features are built and checked at their nominal values."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 d18f24479124.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "347 of 349 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "11 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (86 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "16 solids in STEP AP242. 96 of 96 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 1 - Validation, 24 February 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 2 sends the label part number to table II, but the part numbers are in table I; table II lists first article tests."
   ]
  },
  {
   "id": "MIL-DTL-16377/58C(SH)",
   "slug": "mil-dtl-16377-58c-sh",
   "title": "Fixtures, lighting; fluorescent, detail lighting for mirrors, 120 volts, 60 hertz, dripproof, symbols 351, 351.1, 352, 352.1, 351SSL, 351.1SSL, 352SSL, and 352.1SSL",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-16377_58C(SH) Fixtures, lighting",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 10,
   "dimensions": 136,
   "dimensions_met": 136,
   "kind": "Detail specification sheet",
   "dated": "26 May 2023",
   "status": "Active, 26 May 2023",
   "newest": "Revision C, 26 May 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "6230-01-511-3225, light, bed, M16377/58-351.1-MOD (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-16377_58C(SH) package.pdf",
    "scan": "MIL-DTL-16377_58C(SH) legacy scan.pdf",
    "clean": "MIL-DTL-16377_58C(SH) clean copy.pdf",
    "record": "MIL-DTL-16377_58C(SH) validation record.pdf",
    "sheet": "MIL-DTL-16377_58C(SH) 3D model.pdf",
    "parts": "MIL-DTL-16377_58C(SH) parts list.pdf",
    "inspection": "MIL-DTL-16377_58C(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M16377_58-352-freecad.png",
    "pair": "Models/views/M16377_58-352-pair.png",
    "record": "Models/views/M16377_58-352-record.png",
    "front": "Models/views/M16377_58-352-front.png",
    "top": "Models/views/M16377_58-352-top.png",
    "right": "Models/views/M16377_58-352-right.png",
    "cut": "Models/views/M16377_58-352-cut.png"
   },
   "shown_part": "M16377/58-352",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the eight complete fixtures (symbols 351, 351.1, 352, 352.1 and their SSL equivalents): the figure 4 enclosure section run to the figure 2 and 3 length with the six figure 6 mounting holes in the back, and the two figure 5 window assemblies (001 and 002) as the window pane fused with its U gasket.",
   "not_modeled": [
    "The enclosure's interior and sheet-metal walls: ballast, lamps, lamplocks, starters, lampholders, wiring and the 1-15/32, 21/32 and 2-5/8 lamp spacing dimensions of figure 4, and the corner radii it draws.",
    "The stuffing tube and cable (located 1-1/4 from the right end and 1-1/2 from the back, with no size given), the 1-29/32 receptacle and switch panel, the receptacles, switch, quick-opener fasteners, piano hinge, rivets and the window frame on the sloped face.",
    "The window's position along the fixture (only that the lamp and window centerlines coincide) and the window opening in the enclosure.",
    "The gasket slot and the 1/8 gasket base as separate surfaces: the window edge fills the slot, so the fused assembly shows only the 5/16 edge band and its 3/32 steps; the gasket corner joints and segments are not drawn.",
    "Labels (type I, type IV and the window installation label), the prismatic surface of the window, finish, material, weight limits, wiring and photometric data.",
    "The general tolerances of 3.5.2 of MIL-DTL-16377 on the 45 degree face and the figure 6 hole dimensions, and the Rubber Manufacturers Association extrusion tolerances on the gasket; those features are built and checked at their printed values."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, 0 scanned. SHA-256 4304c4c88e5f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,327 of 1,343 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "53 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 7 tables (276 cells), 8 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "10 solids in STEP AP242. 136 of 136 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C, 26 May 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 6 locates the hole pattern from an unlabeled centerline; it does not say whether this is the middle of the overall length or the lamp and window centerline, which sits off the middle because of the 1-29/32 receptacle panel."
   ]
  },
  {
   "id": "MIL-DTL-16377/59B(SH)",
   "slug": "mil-dtl-16377-59b-sh",
   "title": "Fixtures, lighting; fluorescent and solid-state equivalent, detail lighting for step illumination, 8 watts, 120 volts, 60 hertz, watertight, symbols 353, 353.1, 353.2, 353SSL, 353.1SSL, and 353.2SSL",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-16377_59B(SH) Fixtures, lighting",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 9,
   "dimensions": 195,
   "dimensions_met": 195,
   "kind": "Detail specification sheet",
   "dated": "26 May 2023",
   "status": "Active, 26 May 2023",
   "newest": "Revision B, 26 May 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "6230-01-511-3523, light, bed, M16377/59-353.1-MOD (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-16377_59B(SH) package.pdf",
    "scan": "MIL-DTL-16377_59B(SH) legacy scan.pdf",
    "clean": "MIL-DTL-16377_59B(SH) clean copy.pdf",
    "record": "MIL-DTL-16377_59B(SH) validation record.pdf",
    "sheet": "MIL-DTL-16377_59B(SH) 3D model.pdf",
    "parts": "MIL-DTL-16377_59B(SH) parts list.pdf",
    "inspection": "MIL-DTL-16377_59B(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M16377_59-353.1SSL-freecad.png",
    "pair": "Models/views/M16377_59-353.1SSL-pair.png",
    "record": "Models/views/M16377_59-353.1SSL-record.png",
    "front": "Models/views/M16377_59-353.1SSL-front.png",
    "top": "Models/views/M16377_59-353.1SSL-top.png",
    "right": "Models/views/M16377_59-353.1SSL-right.png",
    "cut": "Models/views/M16377_59-353.1SSL-cut.png"
   },
   "shown_part": "M16377/59-353.1SSL",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the six complete step illumination fixtures of Table V (one shape: the Figure 2 front frame with its window opening and seven guard bars, the enclosure behind the mounting surface, and the six countersunk Figure 5 mounting holes), and solids of the window assembly of Figure 3 for M16377/59-001 and the -002 and -003 windows that Note 1 names (gasket ring with the 1/8 window seated in its slot).",
   "not_modeled": [
    "Everything inside the enclosure: lamp, specular reflector, ballast, starter and socket, lampholders and wiring (Figure 4), and the internal 9/16 (REF) and 3/4 (REF) lamp positions.",
    "The stuffing tube, packing assembly and 10 feet of cable at one end, 1/2 (REF) off the centerline.",
    "The stepped back of the enclosure in section B-B, its 3/32 minimum cast wall, the separate box flange under the window frame, the rounded corners of the faceplate and the four #10-24 x 5/8 machine screws.",
    "The type IV label (1/4 (REF) off the centerline), the installation instructions label of Figure 3(b), the prismatic face and color of the acrylic window, the neoprene and cement.",
    "The tolerances of 3.5.2 of MIL-DTL-16377 and the RMA extrusion tolerances, which the document cites without values; those features are built and checked at their nominal values."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 cfaa318c4890.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "977 of 1,019 items agreed. All 17 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 5 tables (211 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 195 of 195 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B, 26 May 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Note 1 of Figure 3 names window part numbers M16377/59-002 (red, symbol 353.1) and -003 (blue, symbol 353.2), but Table V assigns only -001 and the symbol list gives 353.1 and 353.2 a clear prismatic lens assembly.",
    "Model. Figure 2 does not dimension the enclosure that passes through the 12-7/8 by 3-1/16 (REF) cutout, so its outside size and its clearance in the cutout are not set."
   ]
  },
  {
   "id": "MIL-DTL-16377/71A(SH)",
   "slug": "mil-dtl-16377-71a-sh",
   "title": "Fixtures, lighting; fluorescent and solid-state equivalent, detail lighting for mirrors for small boats, 8 watts, 120 volts, 60 hertz, totally enclosed, symbols 354 and 354SSL",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-16377_71A(SH) Fixtures, lighting",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 3,
   "dimensions": 10,
   "dimensions_met": 10,
   "kind": "Detail specification sheet",
   "dated": "26 May 2023",
   "status": "Active, 26 May 2023",
   "newest": "Revision A, 26 May 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "6210-01-511-3238, fixture, lighting, M16377/71-354-MOD (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-16377_71A(SH) package.pdf",
    "scan": "MIL-DTL-16377_71A(SH) legacy scan.pdf",
    "clean": "MIL-DTL-16377_71A(SH) clean copy.pdf",
    "record": "MIL-DTL-16377_71A(SH) validation record.pdf",
    "sheet": "MIL-DTL-16377_71A(SH) 3D model.pdf",
    "parts": "MIL-DTL-16377_71A(SH) parts list.pdf",
    "inspection": "MIL-DTL-16377_71A(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M16377_71-354-freecad.png",
    "pair": "Models/views/M16377_71-354-pair.png",
    "record": "Models/views/M16377_71-354-record.png",
    "front": "Models/views/M16377_71-354-front.png",
    "top": "Models/views/M16377_71-354-top.png",
    "right": "Models/views/M16377_71-354-right.png",
    "cut": "Models/views/M16377_71-354-cut.png"
   },
   "shown_part": "M16377/71-354",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the two complete fixtures (symbols 354 and 354SSL) as blocks of the figure 2 overall length, box width and overall height, and the figure 3 prismatic window (part 001) as a flat 1/8 inch sheet.",
   "not_modeled": [
    "The fixture's sloped hinged cover and its length, the box height below the cover, the .063 sheet-metal walls of the box and cover assembly, and every internal part: lamp, starter and starter socket, ballast, reflector, lampholder, lamplock, window clip and wiring.",
    "Parts outside or on the faces of the envelope: hinges, captive cover securing screws, toggle switch, receptacle, Heyco connector and the 10 foot cable.",
    "The four center punch marks and the two mounting holes drilled at installation, located by the 2-1/16 dimension from the switch end, the 12 inch mounting dimension and 3/4 above the bottom; the figure gives no mark or hole size.",
    "The window's prisms on one face, its position in the cover, and its material (clear, heat resistant cast acrylic, type CLEAR-2 of MIL-DTL-24191).",
    "Labels, finish, weight, wiring, electrical and photometric requirements.",
    "The general tolerances of 3.5.2 of MIL-DTL-16377 on the figure 2 dimensions and the sheet tolerance of MIL-DTL-24191 on the 1/8 window thickness; those are built and checked at their printed values."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 f758593e69ed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "795 of 836 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 5 tables (174 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "3 solids in STEP AP242. 10 of 10 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A, 26 May 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-16377/74A",
   "slug": "mil-dtl-16377-74a",
   "title": "Fixtures, lighting; fluorescent and ssl equivalent, emergency lighting, 40 watts, 120 volts, 60 hertz, watertight, symbols 77.4EM, 77.5EM, 344.2EM, 344.3EM, 77.4EMSSL, 77.5EMSSL, 344.2EMSSL, and 344.3EMSSL",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-16377_74A Fixtures, lighting",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 10,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "30 June 2014",
   "status": "Active, 21 July 2021",
   "newest": "Revision A Notice 1 - Validation, 21 July 2021",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "6210-01-508-6525, fixture, lighting, MIL-DTL-16377/74 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-16377_74A package.pdf",
    "scan": "MIL-DTL-16377_74A legacy scan.pdf",
    "clean": "MIL-DTL-16377_74A clean copy.pdf",
    "record": "MIL-DTL-16377_74A validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "10 pages, 2 scanned. SHA-256 611fef6eb5e9.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,551 of 1,555 items agreed. All 4 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 4 tables (292 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-16377/74A is a detail specification sheet for watertight 40-watt, 120-volt emergency lighting fixtures (symbols 77.4EM, 77.5EM, 344.2EM, 344.3EM and their SSL equivalents) that sets classification, electrical rating, battery back-up performance, cable, gasket, weight, labels, standard parts, tests and NSNs, draws only an undimensioned outline, typical view and wiring diagram, and sends all dimensional data to figures 1-3 of MIL-DTL-16377/11 and figures 10, 25 and 26 of MIL-DTL-16377; its only size is an approximate 3 in H x 3 1/2 in W x 16 in L ballast enclosure in Table I.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 21 July 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-16377/7B(SH)",
   "slug": "mil-dtl-16377-7b-sh",
   "title": "Fixtures, lighting; T5 fluorescent and ssl equivalent, general lighting, 16 watts, 120 volts, 60 hertz, watertight, symbols 70.3, 70.4, 78.2, 336, 336.1, 70.3SSL, 70.4SSL, 78.2SSL, 336SSL, and 336.1SSL",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-16377_7B(SH) Fixtures, lighting",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 11,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "30 June 2014",
   "status": "Active, 21 July 2021",
   "newest": "Revision B Notice 1 - Validation, 21 July 2021",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 3,
   "by_class": {
    "Virginia": 3
   },
   "stock_examples": [
    "6210-01-510-9625, fixture, lighting, M16377/7 (Virginia)",
    "6210-01-510-9785, window, lighting fixture, M16377/7 (Virginia)",
    "6230-01-511-3184, light, bed, M16377/7-70.4-MOD (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-16377_7B(SH) package.pdf",
    "scan": "MIL-DTL-16377_7B(SH) legacy scan.pdf",
    "clean": "MIL-DTL-16377_7B(SH) clean copy.pdf",
    "record": "MIL-DTL-16377_7B(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "11 pages, 2 scanned. SHA-256 f6744d007bc0.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,367 of 1,411 items agreed. 20 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "78 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 7 tables (374 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-16377/7B is a specification sheet for watertight 16-watt T5 fluorescent and SSL general lighting fixtures (symbols 70.3, 70.4, 78.2, 336 and 336.1 and their SSL equivalents) that sets classification, electrical rating, photometric data (Figure 6), wiring, standard parts (Table I), weights, labels, inspections (Tables II to IV) and part numbers (Table V); Figures 1 to 4 are typical views that give only a 3 in. maximum height, the 17.281/17.250 by 4.656/4.609 inside dimensions at the window seat, the 29/32 and 7/8 lamp center locations, a 1/8 minimum, a 2-1/4 reference height and the figure 4 clamp at 2 \u00b11/32 and 4-1/2 approximate, and send dimensions and configuration to figure 10 of MIL-DTL-16377 and mounting to its figures 25 and 26, so no outside length, width or wall of the enclosure is fixed.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 21 July 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 6, line of small text just below the chart frame at the left, under the 330\u00b0 label: read as , could be SH0995..."
   ]
  },
  {
   "id": "MIL-DTL-16377/9B(SH)",
   "slug": "mil-dtl-16377-9b-sh",
   "title": "Fixtures, lighting; fluorescent and ssl equivalent, general lighting, 24 watts, 120 volts, 60 hertz, watertight, symbols 73.3, 73.4, 346.2, 346.3, 73.3SSL, 73.4SSL, 346.2SSL, and 346.3SSL",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-16377_9B(SH) Fixtures, lighting",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 11,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "30 June 2014",
   "status": "Active, 21 July 2021",
   "newest": "Revision B Notice 1 - Validation, 21 July 2021",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 6,
   "by_class": {
    "Virginia": 4,
    "Seawolf": 2
   },
   "stock_examples": [
    "6230-01-510-9743, light, bed, M16377/9-346.2-MOD (Virginia)",
    "6230-01-511-3198, light, bed, M16377/9-346.3(MOD) (Virginia)",
    "6230-01-511-3208, light, bed, M16377/9-346.2-GW-SS(MOD) (Virginia)",
    "6210-01-513-1530, fixture, lighting, M16377/9/66-343.1-G-W-SS-MOD (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-16377_9B(SH) package.pdf",
    "scan": "MIL-DTL-16377_9B(SH) legacy scan.pdf",
    "clean": "MIL-DTL-16377_9B(SH) clean copy.pdf",
    "record": "MIL-DTL-16377_9B(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "11 pages, 3 scanned. SHA-256 c088876236f1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,308 of 1,324 items agreed. All 14 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "77 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 7 tables (354 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-16377/9B is a specification sheet for watertight 24-watt general lighting fixtures (fluorescent symbols 73.3, 73.4, 346.2 and 346.3 and their SSL equivalents) that sets classification, electrical rating, photometric data, wiring, standard parts, weights, labels, tests and part numbers; Figures 1 to 3 are typical views that give only a 3-1/2 maximum height, the 7.344/7.281 by 16.062/16.031 inside dimensions at the window seat, the 1-25/64 lamp-to-window depth, the 1-29/32 lamp spacing, a 1/8 minimum and a 2-1/2 reference height, and send the housing configuration and mounting dimensions to figures 10, 25 and 26 of MIL-DTL-16377, so no outside length, width or wall of the enclosure is fixed.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 21 July 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-18240F",
   "slug": "mil-dtl-18240f",
   "title": "Fastener element, self-locking, threaded fastener, 250\u00b0F maximum",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-18240F Fastener element, self-locking",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 24,
   "solids": 32,
   "dimensions": 128,
   "dimensions_met": 128,
   "kind": "Detail specification",
   "dated": "2 JUNE 1997",
   "status": "Active, 4 September 2019",
   "newest": "Revision F Notice 1 - Validation, 4 September 2019",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1
   },
   "stock_examples": [
    "5305-01-528-9585, screw, cap, socket head, MIL-DTL-18240 (Virginia)",
    "5305-01-484-9679, screw, cap, socket head, MIL-F-18240 1.250-7UNRC-3AX4.500 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-18240F package.pdf",
    "scan": "MIL-DTL-18240F legacy scan.pdf",
    "clean": "MIL-DTL-18240F clean copy.pdf",
    "record": "MIL-DTL-18240F validation record.pdf",
    "sheet": "MIL-DTL-18240F 3D model.pdf",
    "parts": "MIL-DTL-18240F parts list.pdf",
    "inspection": "MIL-DTL-18240F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 23",
   "pictures": {
    "iso": "Models/views/MIL-DTL-18240_80_N-freecad.png",
    "pair": "Models/views/MIL-DTL-18240_80_N-pair.png",
    "record": "Models/views/MIL-DTL-18240_80_N-record.png",
    "front": "Models/views/MIL-DTL-18240_80_N-front.png",
    "top": "Models/views/MIL-DTL-18240_80_N-top.png",
    "right": "Models/views/MIL-DTL-18240_80_N-right.png",
    "cut": "Models/views/MIL-DTL-18240_80_N-cut.png"
   },
   "shown_part": "MIL-DTL-18240 80 N",
   "application": "FreeCAD 1.1.4",
   "modeled": "32 solids, one per row of Table I (Gov't designations 04 to 200, nominal .112 to 1.250, types L,P and N): the threaded end of a fastener as a plain cylinder carrying one self-locking element, a rectangular strip or patch for types L and P and a round pellet for type N, placed and sized by A, B, C and D of figure 1.",
   "not_modeled": [
    "Threads (UNC, UNJC, UNF, UNJF, UNRC or UNRF) and the rest of the fastener (head, shank, length, point), which the applicable fastener standard defines.",
    "The strip slot and pellet hole depths of Table IA: the strip and the pellet fill them, so they lie inside the solid and are not measured.",
    "The second element that footnote 2/ of Table I allows on sizes .500 and larger, not more than 120 degrees apart.",
    "The type N protrusion of B + .007 inch that 6.3.1 also approves.",
    "The test nuts of Tables VA and VB, which are torque-test equipment rather than part of the element.",
    "Element material, the color code of Table VIII, and the torque, vibration, temperature and reusability requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "24 pages, 0 scanned. SHA-256 dd912f309a0a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,066 of 5,200 items agreed. All 46 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "635 checks on size series and limits. 20 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "16 pages of searchable text, 13 tables (947 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "32 solids in STEP AP242. 128 of 128 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 1 - Validation, 4 September 2019. ASSIST also holds Revision F Amendment 1 (13 March 2000). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 does not show where D is measured on type N; the model takes it as the pellet's width across the thread, which Table I supports by giving D min equal to A min on every type N row."
   ]
  },
  {
   "id": "MIL-DTL-22050F(SH)",
   "slug": "mil-dtl-22050f-sh",
   "title": "Gasket and packing material, rubber, for use with polar fluids, steam, and air at moderately high temperatures",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-22050F(SH) Gasket and packing material, rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 11,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "13 May 2019",
   "status": "Active, 5 June 2024",
   "newest": "Revision F Notice 1 - Validation, 5 June 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 2
   },
   "stock_examples": [
    "5331-01-508-8281, o-ring, M22050-1-217 (Virginia)",
    "5330-01-509-0301, rubber sheet, solid, cloth insert, MIL-G-22050 GR1 0.125 THK (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-22050F(SH) package.pdf",
    "scan": "MIL-DTL-22050F(SH) legacy scan.pdf",
    "clean": "MIL-DTL-22050F(SH) clean copy.pdf",
    "record": "MIL-DTL-22050F(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "11 pages, 0 scanned. SHA-256 f4e0a45375e6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,516 of 4,539 items agreed. All 8 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "13 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 2 tables (156 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-22050 is a material specification for ethylene-propylene rubber gasket and packing material that defines grades, physical property limits (Table I), test methods and suggested formulations (Table II); O-ring dimensions and tolerances come from the SAE AS568 dash number, not from this document.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 1 - Validation, 5 June 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-22549E(SH)",
   "slug": "mil-dtl-22549e-sh",
   "title": "Valves, angle, relief, for gas and oxygen service (sizes 2 inches NPS and below); naval shipboard",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-22549E(SH) Valves, angle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "8 July 2025",
   "status": "Active, 8 July 2025",
   "newest": "Revision E, 8 July 2025",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 7,
   "by_class": {
    "Los Angeles": 4,
    "Ohio": 2,
    "Seawolf": 1
   },
   "stock_examples": [
    "4820-01-071-8815, valve, safety relief, MIL-V-22549 (Los Angeles)",
    "4820-01-127-6669, valve, safety relief, MIL-V-22549 (Los Angeles)",
    "4820-01-168-1877, valve, safety relief, MIL-V-22549 (Los Angeles)",
    "4820-01-488-4539, valve, safety relief, MIL-V-22549 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-22549E(SH) package.pdf",
    "scan": "MIL-DTL-22549E(SH) legacy scan.pdf",
    "clean": "MIL-DTL-22549E(SH) clean copy.pdf",
    "record": "MIL-DTL-22549E(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, 0 scanned. SHA-256 80ddb16503b0.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,655 of 3,673 items agreed. All 1 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 4 tables (68 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-22549 is a detail specification for naval shipboard angle relief valves for gas and oxygen service that defines pressure ratings, set-pressure ranges, union end-connection drawings by reference, relief characteristics and verification tests, but gives no dimensions for any valve size.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E, 8 July 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-22992H w/AMENDMENT 4",
   "slug": "mil-dtl-22992h-w-amendment-4",
   "title": "Connectors, plugs and receptacles, electrical, waterproof, quick disconnect, heavy duty type, general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-22992H w_AMENDMENT 4 Connectors, plugs and receptacles",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 47,
   "solids": 10,
   "dimensions": 56,
   "dimensions_met": 56,
   "kind": "Military specification sheet",
   "dated": "10 April 2024",
   "status": "Active, 10 April 2024",
   "newest": "Revision H Amendment 4 (all previous amendments incorporated), 10 April 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-516-5587, connector, receptacle, electrical, MIL-C-22992 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-22992H w_AMENDMENT 4 package.pdf",
    "scan": "MIL-DTL-22992H w_AMENDMENT 4 legacy scan.pdf",
    "clean": "MIL-DTL-22992H w_AMENDMENT 4 clean copy.pdf",
    "record": "MIL-DTL-22992H w_AMENDMENT 4 validation record.pdf",
    "sheet": "MIL-DTL-22992H w_AMENDMENT 4 3D model.pdf",
    "parts": "MIL-DTL-22992H w_AMENDMENT 4 parts list.pdf",
    "inspection": "MIL-DTL-22992H w_AMENDMENT 4 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 11",
   "pictures": {
    "iso": "Models/views/MIL-DTL-22992_size_8_socket-freecad.png",
    "pair": "Models/views/MIL-DTL-22992_size_8_socket-pair.png",
    "record": "Models/views/MIL-DTL-22992_size_8_socket-record.png",
    "front": "Models/views/MIL-DTL-22992_size_8_socket-front.png",
    "top": "Models/views/MIL-DTL-22992_size_8_socket-top.png",
    "right": "Models/views/MIL-DTL-22992_size_8_socket-right.png",
    "cut": "Models/views/MIL-DTL-22992_size_8_socket-cut.png"
   },
   "shown_part": "MIL-DTL-22992 size 8 socket",
   "application": "FreeCAD 1.1.4",
   "modeled": "10 solder-cup contacts of classes C, J and R from figure 1, a pin and a socket for each contact size 16, 12, 8, 4 and 1/0: pin diameter A with its end flat K, body diameter C, solder cup bore D to depth E in a barrel of diameter F, and the side cutout G on sizes 16 and 12.",
   "not_modeled": [
    "H (pin tip below the end of the shell), J (point of socket spring engagement below the end of the shell) and the .062 plug and .109 receptacle recess of the socket insert face: they place the contacts in a connector shell defined on the MS specification sheets, so a contact on its own cannot carry them.",
    "The socket spring members, the rounded or chamfered entry of 3.4.1.2, the socket bore depth L of figure 5, the test pins of table VII and the .008 side play of 3.4.2.4.",
    "Class L contacts (SAE-AS39029/48 and /49), the contact sizes 6, 2/0 and 4/0 of table III, thermocouple contacts and the SAE-AS39029/112 contact bushings, none of which figure 1 dimensions.",
    "Connector shells, inserts and insert arrangements (MIL-STD-1651), coupling rings and threads, keys, protective covers and cable sealing adapters.",
    "Plating, finish and marking."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "47 pages, 1 scanned. SHA-256 5a63bee0f4b6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "15,377 of 15,418 items agreed. All 40 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "93 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "41 pages of searchable text, 23 tables (1,146 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "10 solids in STEP AP242. 56 of 56 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 4 (all previous amendments incorporated), 10 April 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 gives no length for any contact (pin projection, collar, socket barrel, entry bore depth or overall length), so every length in these solids is assumed and must come from the contact drawings before the models are used for manufacture.",
    "Model. Figure 1 refers dimension G to note 4, but note 4 on page 12 says dimension A is measured after plating and the G limit is note 7 (2/3 of E, sizes 16 and 12 only), so the cross-reference needs correcting."
   ]
  },
  {
   "id": "MIL-DTL-23919D(SH)",
   "slug": "mil-dtl-23919d-sh",
   "title": "Reference cell, silver-silver chloride \u2013 impressed current cathodic protection (iccp)",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-23919D(SH) Reference cell, silver-silver chloride \u2013 impress",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 18,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "14 April 2020",
   "status": "Active, 27 February 2025",
   "newest": "Revision D Notice 1 - Validation, 27 February 2025",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5977-01-511-6525, electrode, M23919-2B2B (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-23919D(SH) package.pdf",
    "scan": "MIL-DTL-23919D(SH) legacy scan.pdf",
    "clean": "MIL-DTL-23919D(SH) clean copy.pdf",
    "record": "MIL-DTL-23919D(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, 0 scanned. SHA-256 7468345f755d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "6,617 of 6,653 items agreed. All 8 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "30 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "17 pages of searchable text, 6 tables (244 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-23919 is a detail specification that defines the materials, construction, electrical, pressure, shock and potential-accuracy requirements and tests for silver-silver chloride ICCP reference cells by type, grade, class and performance code, and gives no dimensioned drawing or table that fixes a part shape.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 27 February 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24136C(SH) w/AMENDMENT 1",
   "slug": "mil-dtl-24136c-sh-w-amendment-1",
   "title": "Hose, synthetic rubber, synthetic fiber reinforced, for flexible hose assemblies, general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-24136C(SH) w_AMENDMENT 1 Hose, synthetic rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 13,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "14 December 2021",
   "status": "Active, 22 July 2025",
   "newest": "Revision C Notice 1 - Validation, 22 July 2025",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "4720-01-513-1407, hose assembly, nonmetallic, MIL-H-24136B (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-24136C(SH) w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-24136C(SH) w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-24136C(SH) w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-24136C(SH) w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "13 pages, 0 scanned. SHA-256 5fa5e829ee69.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,258 of 5,271 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "14 pages of searchable text, 4 tables (36 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24136C is a general specification for synthetic rubber, synthetic fiber reinforced hose and hose assemblies that sets construction, materials, a part-number scheme, the proof, stability, impulse, burst and cold-flexibility tests, sampling, and only a maximum ID-to-OD concentricity by size range in Table I, and sends every hose dimension and pressure to the individual specification sheets (3.4.3); Figures 1 and 2 are pressure-time curves for the impulse test, not part drawings.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 1 - Validation, 22 July 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24136/1B(SH)",
   "slug": "mil-dtl-24136-1b-sh",
   "title": "Hose, synthetic rubber, synthetic fiber reinforced, for flexible hose assemblies (low pressure, sizes -80 through -192)",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-24136_1B(SH) Hose, synthetic rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "24 September 2020",
   "status": "Active, 23 July 2025",
   "newest": "Revision B Notice 1 - Validation, 23 July 2025",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 6,
   "by_class": {
    "Virginia": 6
   },
   "stock_examples": [
    "4720-01-513-4588, hose assembly, nonmetallic, MIL-DTL-24136/1 (Virginia)",
    "4720-01-513-5384, hose assembly, nonmetallic, MIL-DTL-24136/1 (Virginia)",
    "4720-01-513-5866, hose assembly, nonmetallic, MIL-DTL-24136/1 (Virginia)",
    "4720-01-513-6248, hose assembly, nonmetallic, MIL-DTL-24136/1 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-24136_1B(SH) package.pdf",
    "scan": "MIL-DTL-24136_1B(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24136_1B(SH) clean copy.pdf",
    "record": "MIL-DTL-24136_1B(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 0f4e53173708.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,959 of 1,961 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "84 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 6 tables (230 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24136/1 is a specification sheet for low-pressure synthetic rubber hose, ordered in bulk by the linear foot, that gives for each dash size -80 to -192 only the working and burst pressures and the inside and outside diameter limits (Table I) and the spiral reinforcement layers, minimum bend radius and impulse pressure (Table II), with no drawing, no length and no end fitting shape, the fittings being MIL-DTL-24787 parts.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 23 July 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24136/3B(SH)",
   "slug": "mil-dtl-24136-3b-sh",
   "title": "Hose, synthetic rubber, synthetic fiber reinforced, for flexible hose assemblies (low pressure, sizes -4 through -32)",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-24136_3B(SH) Hose, synthetic rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "24 September 2020",
   "status": "Active, 19 February 2026",
   "newest": "Revision B Notice 1 - Validation, 19 February 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 8,
   "by_class": {
    "Virginia": 2,
    "Los Angeles": 6
   },
   "stock_examples": [
    "4730-01-503-1731, elbow, hose, MIL-DTL-24136/3 (Virginia)",
    "4720-01-513-3050, hose assembly, nonmetallic, MIL-DTL-24136/3 (Virginia)",
    "4720-01-501-5068, hose assembly, nonmetallic, M24136/3-20 (Los Angeles)",
    "4730-01-501-5074, adapter, straight, pipe to tube, M24136/3-20 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-24136_3B(SH) package.pdf",
    "scan": "MIL-DTL-24136_3B(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24136_3B(SH) clean copy.pdf",
    "record": "MIL-DTL-24136_3B(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 91199487aaa5.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,036 of 2,036 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "183 checks on size series and limits. 10 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 6 tables (277 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24136/3 is a specification sheet for low-pressure synthetic rubber hose, ordered in bulk by the linear foot, that gives for each dash size -4 to -32 only the working and burst pressures and the inside and outside diameter limits (Table I) and the braid construction, minimum bend radius and impulse pressure (Table II), with no drawing, no length and no end fitting shape, the fittings being MIL-DTL-24787 parts.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 19 February 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24332A(SH)",
   "slug": "mil-dtl-24332a-sh",
   "title": "Valves, angle relief",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-24332A(SH) Valves, angle relief",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "2 April 2019",
   "status": "Active, 27 March 2024",
   "newest": "Revision A Notice 1 - Validation, 27 March 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 6,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 2,
    "Ohio": 3,
    "Seawolf": 1
   },
   "stock_examples": [
    "4820-01-500-9853, valve, safety relief, MIL-DTL-24332 (Virginia, Seawolf)",
    "4820-01-130-6611, valve, safety relief, MIL-DTL-24332 (Los Angeles)",
    "4820-01-131-0230, valve, safety relief, MIL-V-24332 (Los Angeles)",
    "4820-01-050-2818, valve, safety relief, MIL-DTL-24332 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-24332A(SH) package.pdf",
    "scan": "MIL-DTL-24332A(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24332A(SH) clean copy.pdf",
    "record": "MIL-DTL-24332A(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, 0 scanned. SHA-256 8e74cae4f6c4.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,946 of 5,959 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "15 pages of searchable text, 5 tables (40 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24332 is a detail specification for angle relief valves that defines grades, service and system codes, materials (Table I), inlet ratings and end-connection specifications (Table II), and set, accumulation and blowdown pressure limits on a log-log chart (Figure 1), and gives no part dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 27 March 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24630A(SH)",
   "slug": "mil-dtl-24630a-sh",
   "title": "Valves, check, in-line, for hydraulic fluid and lubricating oil fluid, general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-24630A(SH) Valves, check",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "17 June 2014",
   "status": "Active, 15 May 2024",
   "newest": "Revision A Notice 2 - Validation, 15 May 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 4,
   "by_class": {
    "Seawolf": 4
   },
   "stock_examples": [
    "4820-01-419-6317, valve, check, MIL-V-24630 (Seawolf)",
    "4730-01-421-6835, nut, union, MIL-V-24630 (Seawolf)",
    "4820-01-422-5734, valve, check, MIL-V-24630 (Seawolf)",
    "4730-01-422-9570, nut, union, MIL-V-24630 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24630A(SH) package.pdf",
    "scan": "MIL-DTL-24630A(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24630A(SH) clean copy.pdf",
    "record": "MIL-DTL-24630A(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, 1 scanned. SHA-256 13d43453b540.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,634 of 5,639 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "14 pages of searchable text, 2 tables (117 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24630 is the general specification for in-line check valves for hydraulic fluid and lubricating oil: it defines materials, performance, leakage limits (Table I), structureborne noise acceptance (Figure 1) and inspection (Table II), and refers valve dimensions to the MIL-DTL-24630/1 and /2 specification sheets.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 2 - Validation, 15 May 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24630/1B(SH)",
   "slug": "mil-dtl-24630-1b-sh",
   "title": "Valves, check, in-line, non-reversible installation for hydraulic fluid and lubricating oil fluid",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-24630_1B(SH) Valves, check",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 18,
   "dimensions": 282,
   "dimensions_met": 282,
   "kind": "Detail specification sheet",
   "dated": "17 June 2014",
   "status": "Active, 15 May 2024",
   "newest": "Revision B Notice 2 - Validation, 15 May 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 15,
   "by_class": {
    "Virginia": 1,
    "Ohio": 2,
    "Seawolf": 12
   },
   "stock_examples": [
    "4820-01-518-7083, valve, check, M24630/1-16 (Virginia)",
    "4820-01-442-5814, valve, check, M24630/1A-24 MOD (Ohio)",
    "4820-01-442-5815, valve, check, M24630/1A-12 MOD (Ohio)",
    "4820-01-419-6317, valve, check, M24630/1-04 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24630_1B(SH) package.pdf",
    "scan": "MIL-DTL-24630_1B(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24630_1B(SH) clean copy.pdf",
    "record": "MIL-DTL-24630_1B(SH) validation record.pdf",
    "sheet": "MIL-DTL-24630_1B(SH) 3D model.pdf",
    "parts": "MIL-DTL-24630_1B(SH) parts list.pdf",
    "inspection": "MIL-DTL-24630_1B(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M24630_1-16_body-freecad.png",
    "pair": "Models/views/M24630_1-16_body-pair.png",
    "record": "Models/views/M24630_1-16_body-record.png",
    "front": "Models/views/M24630_1-16_body-front.png",
    "top": "Models/views/M24630_1-16_body-top.png",
    "right": "Models/views/M24630_1-16_body-right.png",
    "cut": "Models/views/M24630_1-16_body-cut.png"
   },
   "shown_part": "M24630/1-16 body",
   "application": "FreeCAD 1.1.4",
   "modeled": "9 valve bodies (figure 2, table II), one for each complete-valve dash number M24630/1-04 to -40, and 9 union nuts (figure 3, table III), M24630/1-04N to -40N, each body an outside envelope with a plain through bore.",
   "not_modeled": [
    "The complete valve as assembled: the split of the body into two parts, the straight threads and O-rings that join them, the check-valve internals, the face-seal O-ring (AS3209, reference only) and the union nut in place on the body.",
    "Thread form and the pitch diameters in footnotes 2/ and 3/ of tables II and III.",
    "The corner chamfers drawn on the body hex, which carry no dimensions.",
    "Edge breaks of .010 to .020 (.005 to .015 on dash 04), the O-ring groove corner radii (.010 to .020 on the 1/4 size, .010 to .025 on the others), the 1/32 R in the shoulder undercut, and the 63 microinch finishes.",
    "The .005 TIR squareness of the union nut's thread face to its threads, which a perfect solid meets and which is not checked.",
    "Rated flow, pressure drop and leakage (table I) and materials."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 2 scanned. SHA-256 688de9b465d6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "635 of 638 items agreed. All 3 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "302 checks on size series and limits. 7 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 3 tables (315 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "18 solids in STEP AP242. 282 of 282 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 2 - Validation, 15 May 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table II prints the C tolerance as \u00b11/64 with -0 beneath it; the models read it as +1/64 -0, and C + 1/128 meets either reading.",
    "Model. Table II gives no K for dash 04, 06 and 08 although figure 2 draws the .015 outlet face step on every size; the models give those sizes a flat outlet face."
   ]
  },
  {
   "id": "MIL-DTL-24696D(SH) w/AMENDMENT 1",
   "slug": "mil-dtl-24696d-sh-w-amendment-1",
   "title": "Gasket, sheet, non-asbestos",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-24696D(SH) w_AMENDMENT 1 Gasket, sheet",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 51,
   "solids": 61,
   "dimensions": 330,
   "dimensions_met": 330,
   "kind": "Detail specification",
   "dated": "01 March 2022",
   "status": "Active, 1 March 2022",
   "newest": "Revision D Amendment 1 (amendment incorporated), 1 March 2022",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5330-01-504-0703, gasket, MIL-G-24696 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-24696D(SH) w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-24696D(SH) w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-24696D(SH) w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-24696D(SH) w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-24696D(SH) w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-24696D(SH) w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-24696D(SH) w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {
    "iso": "Models/views/M24696_1068X-freecad.png",
    "pair": "Models/views/M24696_1068X-pair.png",
    "record": "Models/views/M24696_1068X-record.png",
    "front": "Models/views/M24696_1068X-front.png",
    "top": "Models/views/M24696_1068X-top.png",
    "right": "Models/views/M24696_1068X-right.png",
    "cut": "Models/views/M24696_1068X-cut.png"
   },
   "shown_part": "M24696/1068X",
   "application": "FreeCAD 1.1.4",
   "modeled": "61 solids, one per dash number: the 34 Table I flat sheets (dash 001 to 034), each a rectangular block of the printed length, width and thickness, and the 27 Table II pre-cut round gaskets (dash 051 to 077), each a flat ring of the printed O.D., I.D. and thickness with its bolt holes on the bolt circle where the table gives them; each solid stands for both type codes of its dash number.",
   "not_modeled": [
    "Type code A (type I, steam service) and B (type II, water, lube oil and hydraulic oil service) change only the material and its tests, so each solid stands for both PINs of its dash number (122 PINs in all) and is named with X in place of the type code.",
    "The Table II tolerances, which the document takes from ASME B16.21 and does not print; each Table II dimension is checked at its printed value.",
    "The test gasket specimens of appendices B to K (I.D., O.D. and thickness for each test flange in Tables B-I to K-I) and the test flange assemblies and bolt tightening sequences of figures B-1 to K-2, which define test set-ups, not ordered parts.",
    "Material, physical and performance requirements (detrimental materials, tensile strength, compressibility, flexibility, sealability and the appendix tests), identification marking and packaging."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "51 pages, 2 scanned. SHA-256 5087127344c1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "15,598 of 15,622 items agreed. All 33 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "180 checks on size series and limits. 6 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "50 pages of searchable text, 18 tables (639 cells), 21 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "61 solids in STEP AP242. 330 of 330 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Amendment 1 (amendment incorporated), 1 March 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table II, column 'Thickness in inches': 0.062 then 0.016. Page 3 prints 0.062 for 072 and 0.016 for 073; 0.016 is the thinnest standard sheet (table I dash 001). The I.D. cells of 072 to 077 repeat each row's thickness (073 I.D. 0.016 on a 7.625 O.D. gasket), which looks wrong as printed and is a point for an engineer.",
    "Model. Table II prints the I.D. of dash numbers 072 to 077 equal to each row's thickness (0.062, 0.016, 0.062, 0.125, 0.062 and 0.062), a bore of 0.125 or less in gaskets 3.250 to 9.000 across, while dash 076's 9.000 O.D. with eight 0.750 holes on a 7.50 bolt circle is the ASME B16.5 NPS 4 Class 150 flange bolting; the solids carry the printed I.D. values, and an engineer must confirm the intended bores.",
    "Model. Table I prints the dash 001 thickness as 0.016 (\u00b10.005, -0.002), which puts the lower limit at 0.011 or 0.014 depending on which minus value applies; the solid is built at 0.016 and checked against the tighter 0.014 to 0.021.",
    "Model. Table I applies its \u00b11.0 width tolerance to every dash number, which lets the 1 inch wide dash 030 strip be anywhere from 0 to 2 inches wide; an engineer must set a usable width tolerance for it."
   ]
  },
  {
   "id": "MIL-DTL-24728/8B",
   "slug": "mil-dtl-24728-8b",
   "title": "Interconnecting box, fiber optic, fusion splice tray and tray holder module",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-24728_8B Interconnecting box, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 13,
   "solids": 7,
   "dimensions": 91,
   "dimensions_met": 91,
   "kind": "Detail specification sheet",
   "dated": "11 June 2025",
   "status": "Active, 11 June 2025",
   "newest": "Revision B, 11 June 2025",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "6080-01-578-9832, splice enclosure, fiber optic, M24728/8-51 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-24728_8B package.pdf",
    "scan": "MIL-DTL-24728_8B legacy scan.pdf",
    "clean": "MIL-DTL-24728_8B clean copy.pdf",
    "record": "MIL-DTL-24728_8B validation record.pdf",
    "sheet": "MIL-DTL-24728_8B 3D model.pdf",
    "parts": "MIL-DTL-24728_8B parts list.pdf",
    "inspection": "MIL-DTL-24728_8B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M24728_8-51_tray_base-freecad.png",
    "pair": "Models/views/M24728_8-51_tray_base-pair.png",
    "record": "Models/views/M24728_8-51_tray_base-record.png",
    "front": "Models/views/M24728_8-51_tray_base-front.png",
    "top": "Models/views/M24728_8-51_tray_base-top.png",
    "right": "Models/views/M24728_8-51_tray_base-right.png",
    "cut": "Models/views/M24728_8-51_tray_base-cut.png"
   },
   "shown_part": "M24728/8-51 tray base",
   "application": "FreeCAD 1.1.4",
   "modeled": "The envelope of the M24728/8-50 splice tray holder module and the M24728/8-51 splice tray, the tray's envelope plus its base with sleeve holders, cover with foam pad, both foam pad sections and the barrier, each built from the millimetre values of tables I to VIII.",
   "not_modeled": [
    "The holder module's base, cover and support angle assemblies inside the envelope, its eight 40 degree tray slots (note 4), the 20.0 mm minimum tray spacing (note 6), the mounting hardware (note 5) and the mounting holes of MIL-DTL-24728/1.",
    "The dimple center line DC of figure 3 and the four cover dimples: the end flanges that carry them are not modeled.",
    "The formed shape of the tray base (curled long edges, center channel, end flanges, the corners past the lip) and of the cover (upturned end tabs, the larger slot in its narrow end), and every corner radius.",
    "The position of the barrier inside the tray, which the document does not give.",
    "Mass, finish, stress relief, marking and the environmental and optical requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "13 pages, 0 scanned. SHA-256 49e4f6a158e6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,115 of 2,137 items agreed. All 12 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "94 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 11 tables (278 cells), 8 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "7 solids in STEP AP242. 91 of 91 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B, 11 June 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Tables III and IV call V1 (9.39 to 9.65 mm) the oval length and V2 (12.48 or 12.57 to 12.83 mm) the oval width, but figures 3 and 4 draw the larger extent along the tray; the solids follow the figures.",
    "Model. The document gives no sheet thickness for the tray base and cover and no thickness for the holder module's mounting plate; the solids use 1.0 mm and 3.2 mm.",
    "Model. Figure 7 locates the sleeve holders (A1, A2, B) but gives no holder width, length or height.",
    "Model. Figure 7 measures B from the top lip and figure 3 measures P3 and TF from the base end, but the offset between the lip and the end is not dimensioned; the solid makes them coincide."
   ]
  },
  {
   "id": "MIL-DTL-24787A(SH)",
   "slug": "mil-dtl-24787a-sh",
   "title": "Fittings, end, reusable, for flexible hose assemblies, general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-24787A(SH) Fittings, end",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 13,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "24 September 2020",
   "status": "Active, 23 July 2025",
   "newest": "Revision A Notice 1 - Validation, 23 July 2025",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 5,
   "by_class": {
    "Virginia": 4,
    "Ohio": 1
   },
   "stock_examples": [
    "4720-01-513-5384, hose assembly, nonmetallic, MIL-F-24787 (Virginia)",
    "4720-01-513-5866, hose assembly, nonmetallic, MIL-F-24787 (Virginia)",
    "4720-01-513-6248, hose assembly, nonmetallic, MIL-F-24787 (Virginia)",
    "4720-01-513-6371, hose assembly, nonmetallic, MIL-F-24787 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-24787A(SH) package.pdf",
    "scan": "MIL-DTL-24787A(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24787A(SH) clean copy.pdf",
    "record": "MIL-DTL-24787A(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "13 pages, 0 scanned. SHA-256 fa986b54c60c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,742 of 3,759 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "13 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 4 tables (72 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "This is a general specification for reusable hose end fittings that sets materials, marking, threads, workmanship, sampling and impulse and proof test requirements, and its paragraph 3.4.2 leaves the dimensional envelope of each fitting type to the figures of specification sheets /1 to /6.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 23 July 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24787/5A(SH)",
   "slug": "mil-dtl-24787-5a-sh",
   "title": "Fittings, end, type D (hose to hose, 90-DEGREE elbow), reusable, for flexible hose assemblies",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-24787_5A(SH) Fittings, end",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 47,
   "dimensions": 236,
   "dimensions_met": 230,
   "kind": "Detail specification sheet",
   "dated": "24 September 2020",
   "status": "Active, 23 July 2025",
   "newest": "Revision A Notice 1 - Validation, 23 July 2025",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "4730-01-503-1731, elbow, hose, MIL-DTL-24787/5 (Virginia)",
    "4730-01-455-2326, elbow, hose, M24787/5-16,TY-D,GR-XI (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24787_5A(SH) package.pdf",
    "scan": "MIL-DTL-24787_5A(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24787_5A(SH) clean copy.pdf",
    "record": "MIL-DTL-24787_5A(SH) validation record.pdf",
    "sheet": "MIL-DTL-24787_5A(SH) 3D model.pdf",
    "parts": "MIL-DTL-24787_5A(SH) parts list.pdf",
    "inspection": "MIL-DTL-24787_5A(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 7",
   "pictures": {
    "iso": "Models/views/M24787_5-RB24135_09-24X-freecad.png",
    "pair": "Models/views/M24787_5-RB24135_09-24X-pair.png",
    "record": "Models/views/M24787_5-RB24135_09-24X-record.png",
    "front": "Models/views/M24787_5-RB24135_09-24X-front.png",
    "top": "Models/views/M24787_5-RB24135_09-24X-top.png",
    "right": "Models/views/M24787_5-RB24135_09-24X-right.png",
    "cut": "Models/views/M24787_5-RB24135_09-24X-cut.png"
   },
   "shown_part": "M24787/5-RB24135/09-24X",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of all 47 type D hose to hose 90-degree elbow end fittings in Tables II to IX, one per PIN that Table I makes available: solid socket, ring and band and bolt together styles, each with the bent elbow tube and a socket on both legs.",
   "not_modeled": [
    "Bores, the hose nipple and its serrations, the hose cavity and the socket's internal form, which the sheet does not dimension.",
    "The collar, rings and bands of the ring and band socket, and the segments, bolts and optional body shape of the bolt together socket.",
    "The tube size, the hex lengths and the solid socket and ring and band socket lengths, which the sheet does not give.",
    "Materials, which the table notes assign to QQ-N-281, QQ-N-286, MIL-C-24723, ASTM A494/A494M, UNS C95800 bronze, SAE AMS6381, MIL-T-1368 and MIL-T-16420."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, 1 scanned. SHA-256 85eaef3c5712.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,302 of 2,794 items agreed. All 14 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "155 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 10 tables (370 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "47 solids in STEP AP242. 230 of 236 stated dimensions measure within limits; 6 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 23 July 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table IX, column 'X max': 5.88 then 5.81. Page 11 prints 5.88 for -24 and 5.81 for -32; every other column rises from -24 to -32, so the smaller X max for the larger -32 fitting looks wrong for its series and is a point for an engineer.",
    "Model. Table II note 1 says sizes -20 and larger do not have the B hex, yet the table prints B nom 1.62, 1.88 and 2.50 for -20, -24 and -32 and no cell refers to the note; the solids carry the printed hex.",
    "Model. Tables VI to VIII print B nom wider than twice A max minus C nom in every row (Table VI -40: B 6.75 against 2 x (5.70 - 3.35) = 4.70; Table VII -192: B 20.00 against 17.00), so sockets B wide over their full length C, as Figure 1 draws them, overlap at the inside of the elbow; the solids show the two sockets merged, and an engineer must settle how the body narrows or turns to clear.",
    "Model. Table VIII prints A max minus C nom smaller than R min in every row (-40: 6.25 - 5.00 = 1.25 against R 2.13; -48: 1.88 against 2.50; -64: 2.00 against 3.00), so a bend of radius R and a socket of length C cannot fit within A; the solids keep R min and C nom and their legs exceed A max.",
    "Model. The PIN example M24787/5-RB24135/01-32X names a ring and band fitting for MIL-DTL-24135/1 hose, but no table gives ring and band dimensions for that hose, so no solid is built for it."
   ]
  },
  {
   "id": "MIL-DTL-25027H",
   "slug": "mil-dtl-25027h",
   "title": "Nut, self-locking, 250\u00b0 F, 450\u00b0 F, and 800\u00b0 F",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-25027H Nut, self-locking",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 32,
   "solids": 38,
   "dimensions": 190,
   "dimensions_met": 190,
   "kind": "Detail specification",
   "dated": "15 August 1997",
   "status": "Canceled, 14 December 1999",
   "newest": "Revision H Notice 1 - Cancellation, 14 December 1999",
   "superseding": "NASM-25027",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5310-01-515-0202, nut, self-locking, hexagon, MIL-N-25027-10C (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-25027H package.pdf",
    "scan": "MIL-DTL-25027H legacy scan.pdf",
    "clean": "MIL-DTL-25027H clean copy.pdf",
    "record": "MIL-DTL-25027H validation record.pdf",
    "sheet": "MIL-DTL-25027H 3D model.pdf",
    "parts": "MIL-DTL-25027H parts list.pdf",
    "inspection": "MIL-DTL-25027H inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 4, page 32",
   "pictures": {
    "iso": "Models/views/MIL-DTL-25027_mandrel_.625-18-freecad.png",
    "pair": "Models/views/MIL-DTL-25027_mandrel_.625-18-pair.png",
    "record": "Models/views/MIL-DTL-25027_mandrel_.625-18-record.png",
    "front": "Models/views/MIL-DTL-25027_mandrel_.625-18-front.png",
    "top": "Models/views/MIL-DTL-25027_mandrel_.625-18-top.png",
    "right": "Models/views/MIL-DTL-25027_mandrel_.625-18-right.png",
    "cut": "Models/views/MIL-DTL-25027_mandrel_.625-18-cut.png"
   },
   "shown_part": "MIL-DTL-25027 mandrel .625-18",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the Figure 4 minimum 3A mandrel for the permanent set test, one per Table X thread size (38), each a 2D-long cylinder at the Table X major diameter with the 45 degree end chamfer.",
   "not_modeled": [
    "Thread form (MIL-S-8879), pitch diameter, lead and half-angle tolerances; recorded as parameters only.",
    "The maximum 3A mandrel, for which Table X gives only a pitch diameter and no major diameter.",
    "The mandrel shank beyond the threaded length, which Figure 4 shows broken off without a dimension.",
    "Figure 1 bearing-surface squareness limits (A for each W) and the Figure 3 plate nut alignment gage, which has no per-size dimensions.",
    "Material (steel), hardness 60 to 64 HRc and 20 microinch surface roughness."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "32 pages, all scanned. SHA-256 bfe8da0f57fe.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "9,611 of 9,689 items agreed. All 15 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "679 checks on size series and limits. 10 breaks checked against the scan: all are as printed. 24 values are also printed on 3 other sheets of the series: all match. A later review settled 1 printed value from another revision.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "28 pages of searchable text, 17 tables (1,417 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "38 solids in STEP AP242. 190 of 190 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision H Notice 1 - Cancellation, 14 December 1999. ASSIST also holds Revision H Amendment 1 (22 December 1998). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table X on page 25 prints the maximum 3A mandrel pitch diameter for 2.000-4.5 as 1.8539 maximum and 1.8335 minimum, a band of .0204 where every other row has .0004, which would make the minimum 1.8535. Revision G prints the same two values, and Amendment 1 of 22 December 1998 replaces Table X with pitch diameters of 1.8529 to 1.8557 for the maximum material condition at this size.",
    "Model. The 2.000-4.5 solid records the maximum mandrel pitch diameter as Table X prints it, 1.8539 maximum and 1.8335 minimum, where every other size has a .0004 band. The engineer must decide whether the minimum is 1.8535 before these limits are used.",
    "Model. Figure 4 gives no shank diameter and no overall length, so each solid ends at the 2D minimum thread length. Amendment 1 of 22 December 1998 deletes Figure 4 and replaces Table X with pitch diameter limits only; the engineer must decide whether the mandrel solids still apply."
   ]
  },
  {
   "id": "MIL-DTL-26482J w/AMENDMENT 2",
   "slug": "mil-dtl-26482j-w-amendment-2",
   "title": "Connectors, electrical, circular, miniature, quick disconnect, environment resisting, receptacles and plugs, general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-26482J w_AMENDMENT 2 Connectors, electrical",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 103,
   "solids": 90,
   "dimensions": 1755,
   "dimensions_met": 1755,
   "kind": "Detail specification",
   "dated": "05 March 2024",
   "status": "Active, 5 March 2024",
   "newest": "Revision J Amendment 2 (all previous amendments incorporated), 5 March 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 2
   },
   "stock_examples": [
    "5935-00-778-4917, cover, electrical connector, MIL-C-26482 (Los Angeles, Virginia)",
    "5935-00-822-2838, connector, receptacle, electrical, MIL-DTL-26482 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-26482J w_AMENDMENT 2 package.pdf",
    "scan": "MIL-DTL-26482J w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-DTL-26482J w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-DTL-26482J w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-DTL-26482J w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-DTL-26482J w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-DTL-26482J w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 5, page 85",
   "pictures": {
    "iso": "Models/views/MIL-DTL-26482_series_2_rear_accessory_end_shell_size_8-freecad.png",
    "pair": "Models/views/MIL-DTL-26482_series_2_rear_accessory_end_shell_size_8-pair.png",
    "record": "Models/views/MIL-DTL-26482_series_2_rear_accessory_end_shell_size_8-record.png",
    "front": "Models/views/MIL-DTL-26482_series_2_rear_accessory_end_shell_size_8-front.png",
    "top": "Models/views/MIL-DTL-26482_series_2_rear_accessory_end_shell_size_8-top.png",
    "right": "Models/views/MIL-DTL-26482_series_2_rear_accessory_end_shell_size_8-right.png",
    "cut": "Models/views/MIL-DTL-26482_series_2_rear_accessory_end_shell_size_8-cut.png"
   },
   "shown_part": "MIL-DTL-26482 series 2 rear accessory end shell size 8",
   "application": "FreeCAD 1.1.4",
   "modeled": "Interface envelopes of the Figure 5 series 1 and series 2 receptacles and plugs in all nine shell sizes 8 to 24, each with a pin insert and with a socket insert (72 solids); the Figure 6 series 2 rear accessory end in each shell size (9); and the Figure 7 series 1 solder contacts in sizes 20, 16 and 12: pin and socket contacts of classes E, P and J and the class H eyelet pin (9).",
   "not_modeled": [
    "Insert arrangements, contact cavities and contact positions, so the pin contact locations D and J, the socket gage engagement depths B and L, and the Detail A entry and Detail B hole diameters and seal depths of Figure 5.",
    "The series 1 receptacle packing (.070 to .080 thick) and its .015 to .035 dimension, the series 2 static seal as a separate part, the bayonet groove detent (.009 to .022) and the coupling ring inspection holes (.047 R ref).",
    "Mounting flanges, jam nuts, rear bodies and coupling ring retention, which the MS sheets define.",
    "Thread form and class (Figure 6 D thread), the grommet wire holes, and the class H solder cup version, whose cup is the Detail A cup modeled on the class E, P and J contacts.",
    "The contact spherical tip radius and socket entry (SAE-AS39029/31 and /32), the drill point of the solder cup, the optional radius R at the side opening, the localized finish areas M and N, and surface finish.",
    "The Figure 7 .120 minimum from the insert rear face to the end of the class E, P and J contacts, since the insert is not part of the contact solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "103 pages, 7 scanned. SHA-256 d2e23be2f72d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "26,525 of 27,204 items agreed. 129 differences went to a third reader. 2 readings remain open.",
     "result": "2 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "407 checks on size series and limits. 10 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "88 pages of searchable text, 54 tables (2,876 cells), 22 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "90 solids in STEP AP242. 1,755 of 1,755 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J Amendment 2 (all previous amendments incorporated), 5 March 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table XVIII, Group 11, rows 'Examination of product' to the second 'Contact resistance (25\u00b0C)': read as Contact resistance (25\u00b0C) 3.6.4 / 4.6.5; Humidity \u2013 temperature cycling 3.6.5 / 4.6.53; Contact resistance (25\u00b0C) 3.6.4 / 4.6.5; Examination of product blank, could be the three value lines one label higher: Examination of product 3.6.4 / 4.6.5; Contact resistance (25\u00b0C) 3.6.5 / 4.6.53; Humidity \u2013 temperature cycling 3.6.4 / 4.6.5.",
    "Open reading. Table XIX, row 96, column 2: read as 3.1, 3.3 thru 3.5, 3.7, & 3.8, could be value in the Group 9 heading row (row 95, column 2) and this cell blank.",
    "Printed value to confirm. Table XXXI, column 'Anodic index (0, 01 v)': 10 then 0. Page 80 prints 0 for group 3 (silver, EMF 0 V), and the source text layer agrees. Every other row has an anodic index of (0.15 - EMF) x 100, which gives 15 for silver. The printed value looks wrong for its series and needs an engineer's check.",
    "Model. Figure 7 does not locate the class H eyelet hole L; with it on the centre of the J/2 end radius, the .120 minimum tab length cannot hold the size 12 hole (J/2 plus L/2 is .143), so the size 12 tab is built .163 long."
   ]
  },
  {
   "id": "MIL-DTL-28748/4F w/AMENDMENT 3",
   "slug": "mil-dtl-28748-4f-w-amendment-3",
   "title": "Connector, electrical, rectangular, rack and panel, crimp type removable socket contacts, sizes 16 and 20",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-28748_4F w_AMENDMENT 3 Connector, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 16,
   "solids": 17,
   "dimensions": 485,
   "dimensions_met": 484,
   "kind": "Detail specification sheet",
   "dated": "30 January 2018",
   "status": "Active, 4 May 2023",
   "newest": "Revision F Notice 1 - Validation, 4 May 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-585-9672, insert, electrical connector, M28748/4-A0002A (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-28748_4F w_AMENDMENT 3 package.pdf",
    "scan": "MIL-DTL-28748_4F w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MIL-DTL-28748_4F w_AMENDMENT 3 clean copy.pdf",
    "record": "MIL-DTL-28748_4F w_AMENDMENT 3 validation record.pdf",
    "sheet": "MIL-DTL-28748_4F w_AMENDMENT 3 3D model.pdf",
    "parts": "MIL-DTL-28748_4F w_AMENDMENT 3 parts list.pdf",
    "inspection": "MIL-DTL-28748_4F w_AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28748_4-H0001L-freecad.png",
    "pair": "Models/views/M28748_4-H0001L-pair.png",
    "record": "Models/views/M28748_4-H0001L-record.png",
    "front": "Models/views/M28748_4-H0001L-front.png",
    "top": "Models/views/M28748_4-H0001L-top.png",
    "right": "Models/views/M28748_4-H0001L-right.png",
    "cut": "Models/views/M28748_4-H0001L-cut.png"
   },
   "shown_part": "M28748/4-H0001L",
   "application": "FreeCAD 1.1.4",
   "modeled": "Seventeen insert solids, one per Figure 2 insert designator A to S under its Table II PIN (M28748/4-x0001L, insert only): the mounting flange with its counterbored square and round mounting holes, the rear body, the .010 front recess, the frame of H, K, P and R, the center through holes of M to S, and a marker hole on every contact position.",
   "not_modeled": [
    "The parts the other PIN positions add, each defined in its own document: shields and clamps (MS18192, MS18193), retaining plates (MS18198 to MS18200), plug and receptacle shells (MS18203, MS18204), jackscrews and guide pins (MS18194 to MS18197), the MS18173 washer and the M39029/35 socket contacts; each solid stands for every PIN with its insert designator.",
    "The contact cavity profile and the insert material, which MIL-DTL-28748 sets; the contact holes are markers of position only.",
    "Contact lettering and numbering, the Table I contact percentages, the insertion and withdrawal forces, and the Figure 1 exploded view, which carries no dimensions."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "16 pages, 8 scanned. SHA-256 6e280c3a9808.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,610 of 1,775 items agreed. All 57 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "750 checks on size series and limits. 18 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "21 pages of searchable text, 14 tables (817 cells), 13 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "17 solids in STEP AP242. 484 of 485 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 1 - Validation, 4 May 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Insert B prints '.600 6 EQUAL SPACES' over the column A, C, E, H, K, which holds five contacts at the '.150 TYP' pitch (four spaces of .150 make .600, and 5 + 4 gives the 9 positions of Table II; six spaces would make .100), so the space count must be corrected to 4.",
    "Model. The configuration R detail gives the .195 through hole without a count, while K has four square holes at .117 either side of the centerline; which positions become through holes must be confirmed.",
    "Model. The sheet locates the contacts but gives no contact cavity sizes, so cavity bores must be taken from MIL-DTL-28748 before the solids are used for contact fit."
   ]
  },
  {
   "id": "MIL-DTL-28840E w/AMENDMENT 4",
   "slug": "mil-dtl-28840e-w-amendment-4",
   "title": "Connectors, electrical, circular, threaded, high shock, high density, shipboard, class D, general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-28840E w_AMENDMENT 4 Connectors, electrical",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 58,
   "solids": 225,
   "dimensions": 5760,
   "dimensions_met": 5760,
   "kind": "Detail specification",
   "dated": "25 June 2026",
   "status": "Active, 25 June 2026",
   "newest": "Revision E Amendment 4 (all previous amendments incorporated), 25 June 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 19,
   "by_class": {
    "Virginia": 10,
    "Los Angeles": 1,
    "Seawolf": 8
   },
   "stock_examples": [
    "5935-01-515-9309, connector, receptacle, electrical, MIL-C-28840 (Virginia)",
    "5935-01-515-9413, connector, plug, electrical, MIL-C-28840 (Virginia)",
    "5935-01-515-9442, connector, plug, electrical, MIL-C-28840 (Virginia)",
    "5935-01-515-9452, connector, plug, electrical, MIL-C-28840 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-28840E w_AMENDMENT 4 package.pdf",
    "scan": "MIL-DTL-28840E w_AMENDMENT 4 legacy scan.pdf",
    "clean": "MIL-DTL-28840E w_AMENDMENT 4 clean copy.pdf",
    "record": "MIL-DTL-28840E w_AMENDMENT 4 validation record.pdf",
    "sheet": "MIL-DTL-28840E w_AMENDMENT 4 3D model.pdf",
    "parts": "MIL-DTL-28840E w_AMENDMENT 4 parts list.pdf",
    "inspection": "MIL-DTL-28840E w_AMENDMENT 4 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 4, page 15",
   "pictures": {
    "iso": "Models/views/MIL-DTL-28840_plug_E_19_pin_insert_key_position_1-freecad.png",
    "pair": "Models/views/MIL-DTL-28840_plug_E_19_pin_insert_key_position_1-pair.png",
    "record": "Models/views/MIL-DTL-28840_plug_E_19_pin_insert_key_position_1-record.png",
    "front": "Models/views/MIL-DTL-28840_plug_E_19_pin_insert_key_position_1-front.png",
    "top": "Models/views/MIL-DTL-28840_plug_E_19_pin_insert_key_position_1-top.png",
    "right": "Models/views/MIL-DTL-28840_plug_E_19_pin_insert_key_position_1-right.png",
    "cut": "Models/views/MIL-DTL-28840_plug_E_19_pin_insert_key_position_1-cut.png"
   },
   "shown_part": "MIL-DTL-28840 plug E (19), pin insert, key position 1",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the MIL-DTL-28840 connector interfaces for all nine shell size designators A (11) to J (33): the receptacle mating end (figure 5) and the plug mating end with its coupling ring and gasket (figure 4), each with a pin insert and with a socket insert in each of key positions 1 to 6 (figure 3), and the connector back end with its accessory thread, spline ring and grommet (figure 6).",
   "not_modeled": [
    "Figure 7, the rear accessory design standard (coupling nut and spline body of the mating accessory), is not modeled.",
    "Contacts and insert arrangements (MIL-STD-1698): the pin contact projection (.194 to .234), the socket contact recess (.028 to .068) and the contact cavities; the inserts are solid.",
    "Plug: the spring member and its .461 \u00b1.020 gauge engagement point (note 9), the .010 MAX thread relief at the coupling ring front, the coupling ring outer shape and its retention, and the gasket configuration (optional per Detail A).",
    "Receptacle: the band location (.515 to .525), band width (.030 to .060) and red stripe, the .000 to .020 front land and blunt start of the A thread, the thread relief groove behind the .445 MIN complete threads, and the flange or jam nut mounting with its four holes, which the specification sheets define.",
    "Thread form: pitch, lead, pitch and minor diameters and classes of figures 8 and 9 and of the V thread; the 2B minor diameter is used only as the gasket outside diameter.",
    "Back end: the .025 R MAX grommet corner, the View A 28 to 30 degree line, the concentricity frames (.005, .006) and the connector body ahead of the .549 minimum perfect thread.",
    "Figures 10 to 14 (test set-ups, test gauge and contact stability fixture)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "58 pages, 3 scanned. SHA-256 6d7fb0ae35a4.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "13,718 of 14,129 items agreed. 246 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "321 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "48 pages of searchable text, 39 tables (1,681 cells), 16 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "225 solids in STEP AP242. 5,760 of 5,760 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 4 (all previous amendments incorporated), 25 June 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 3, callouts DR*, AP*, BP*, CP*, DP*: read as *, could be \u00b0.",
    "Model. Figure 3 prints a small raised mark after DR, AP, BP, CP and DP that reads as either an asterisk or a degree sign; the solids place those keys and keyways at the table angles, and no note on the figure explains an asterisk.",
    "Model. Figure 5 asks only .450 min for the keyway length, but with the gasket face on the receptacle front the plug key fronts (figure 4) reach .727 to .757 into the receptacle, so the keyways must run deeper; the solids cut them to the bore floor.",
    "Model. Figure 6 gives the spline only as the basic angle A across the master tooth and the gap width C; the solids carry 360/A evenly spaced teeth (18 to 45), which an engineer should confirm.",
    "Model. Figure 7 Detail B draws R DIA (.588 max for shell size A) inside B REF (.579 to .583) and shows the accessory spline teeth only in end view, so the accessory was not modeled until an engineer settles its profile."
   ]
  },
  {
   "id": "MIL-DTL-28840/10E w/AMENDMENT 1",
   "slug": "mil-dtl-28840-10e-w-amendment-1",
   "title": "Connectors, electrical, circular, threaded, high shock, high density, shipboard, crimp contacts, receptacle, wall mounting, classes D, DS, P, T, and Z",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-28840_10E w_AMENDMENT 1 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 9,
   "dimensions": 216,
   "dimensions_met": 216,
   "kind": "Detail specification sheet",
   "dated": "8 February 2019",
   "status": "Active, 8 February 2019",
   "newest": "Revision E Amendment 1 (amendment incorporated), 8 February 2019",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 9,
   "by_class": {
    "Virginia": 3,
    "Seawolf": 6
   },
   "stock_examples": [
    "5935-01-517-0359, connector body, receptacle, electr, M28840/10AG1B1 (Virginia)",
    "5935-01-517-0373, connector body, receptacle, electr, M28840/10AH1B1 (Virginia)",
    "5935-01-536-7715, connector, receptacle, electrical, M28840/10AF1S5 (Virginia)",
    "5935-01-508-6647, connector, receptacle, electrical, M28840/10AJ1G1 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-28840_10E w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-28840_10E w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-28840_10E w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-28840_10E w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-28840_10E w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-28840_10E w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-28840_10E w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28840_10_E_-freecad.png",
    "pair": "Models/views/M28840_10_E_-pair.png",
    "record": "Models/views/M28840_10_E_-record.png",
    "front": "Models/views/M28840_10_E_-front.png",
    "top": "Models/views/M28840_10_E_-top.png",
    "right": "Models/views/M28840_10_E_-right.png",
    "cut": "Models/views/M28840_10_E_-cut.png"
   },
   "shown_part": "M28840/10*E***",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-DTL-28840/10E wall mounting receptacle at each of the nine shell size designators A (11) to J (33): a front shell of diameter N, a square flange S wide and .100 to .130 thick with its front face .878 to .898 from the front of the shell and four T holes on the R square, and a rear body to the 2.062 max overall length.",
   "not_modeled": [
    "The front and rear end configuration of the connector (coupling thread, shell bore, master polarizing keyway, key positions 1 to 6, the rear taper, knurled ring and backshell thread), which the figure sends to MIL-DTL-28840; the shell is solid with no bore.",
    "The insert arrangements of MIL-STD-1698 and the crimp contacts; the solids have no insert cavity.",
    "The clipped flange corners the figure draws without a size; the solids have square corners.",
    "The small undimensioned step at the front of the shell drawn in the side view.",
    "The O reference mounting hole and the .188 max panel thickness, which belong to the panel; the solids are checked to pass through O over the length ahead of the flange.",
    "Part numbers that differ only in class code (A, B, F, L, S), insert designator, contact designator or key position share their shell size's envelope; the sheet does not list the insert designators, so those part numbers are not enumerated."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 5b210bf14051.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "410 of 430 items agreed. All 26 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (80 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 216 of 216 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 1 (amendment incorporated), 8 February 2019.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives the shell only as N maximum, gives no diameter for the body behind the flange and sends the front and rear end configuration to MIL-DTL-28840, which is not in the package, so an engineer must take the coupling thread, bore, keyway and rear body dimensions from MIL-DTL-28840 before the solids are used for mating or fit checks."
   ]
  },
  {
   "id": "MIL-DTL-28840/11D w/AMENDMENT 1",
   "slug": "mil-dtl-28840-11d-w-amendment-1",
   "title": "Connectors, electrical, circular, threaded, high shock, high density, shipboard, crimp contacts, receptacle, cable connecting, classes D, DS, P, T and Z",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-28840_11D w_AMENDMENT 1 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 9,
   "dimensions": 126,
   "dimensions_met": 126,
   "kind": "Detail specification sheet",
   "dated": "16 May 2019",
   "status": "Active, 21 March 2024",
   "newest": "Revision D Notice 1 - Validation, 21 March 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-515-9309, connector, receptacle, electrical, M28840/11AJ1P1 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-28840_11D w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-28840_11D w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-28840_11D w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-28840_11D w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-28840_11D w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-28840_11D w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-28840_11D w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28840_11_E_-freecad.png",
    "pair": "Models/views/M28840_11_E_-pair.png",
    "record": "Models/views/M28840_11_E_-record.png",
    "front": "Models/views/M28840_11_E_-front.png",
    "top": "Models/views/M28840_11_E_-top.png",
    "right": "Models/views/M28840_11_E_-right.png",
    "cut": "Models/views/M28840_11_E_-cut.png"
   },
   "shown_part": "M28840/11*E***",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-DTL-28840/11D cable connecting receptacle at each of the nine shell size designators A (11) to J (33): a front shell of diameter N, a flange .100 to .130 thick with its front face .878 to .898 from the front of the shell, round top and bottom on the S diameter and two flats R apart, and a rear body to the 2.062 max overall length.",
   "not_modeled": [
    "The front and rear end configuration of the connector (coupling thread, shell bore, master polarizing keyway, key positions 1 to 6, the rear taper, knurled ring and backshell thread), which the figure sends to MIL-DTL-28840; the shell is solid with no bore.",
    "The insert arrangements of MIL-STD-1698 and the crimp contacts; the solids have no insert cavity.",
    "The small undimensioned step and chamfer at the front of the shell drawn in the side view.",
    "The orientation of the flats to datum A is set by the assumed keyway direction and is not measured, since the keyway is not modeled.",
    "Part numbers that differ only in class code (A, B, F, L, S), insert designator, contact designator or key position share their shell size's envelope; the sheet does not list the insert designators, so those part numbers are not enumerated."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 0e7127a2f472.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "377 of 386 items agreed. All 4 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "12 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (96 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 126 of 126 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 21 March 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives the shell only as N maximum, gives no diameter for the body behind the flange and sends the front and rear end configuration to MIL-DTL-28840, which is not in the package, so an engineer must take the coupling thread, bore, keyway and rear body dimensions from MIL-DTL-28840 before the solids are used for mating or fit checks."
   ]
  },
  {
   "id": "MIL-DTL-28840/12F w/AMENDMENT 3",
   "slug": "mil-dtl-28840-12f-w-amendment-3",
   "title": "Connectors, electrical, circular, threaded, high shock, high density, shipboard, crimp contacts, receptacle, box mounting, classes D, DS, P, T and Z",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-28840_12F w_AMENDMENT 3 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 18,
   "dimensions": 522,
   "dimensions_met": 522,
   "kind": "Detail specification sheet",
   "dated": "2 July 2024",
   "status": "Active, 2 July 2024",
   "newest": "Revision F Amendment 3 (all previous amendments incorporated), 2 July 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 7,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 2,
    "Seawolf": 4
   },
   "stock_examples": [
    "5935-01-515-3556, connector, receptacle, electrical, M28840/12AD1P4 (Virginia)",
    "5935-01-497-6343, connector, receptacle, electrical, M28840/12AB1P6 (Los Angeles)",
    "5935-01-510-6134, connector, receptacle, electrical, M28840/12AF1G3 (Los Angeles)",
    "5935-01-498-4673, connector, receptacle, electrical, M28840/12AE1S5 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-28840_12F w_AMENDMENT 3 package.pdf",
    "scan": "MIL-DTL-28840_12F w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MIL-DTL-28840_12F w_AMENDMENT 3 clean copy.pdf",
    "record": "MIL-DTL-28840_12F w_AMENDMENT 3 validation record.pdf",
    "sheet": "MIL-DTL-28840_12F w_AMENDMENT 3 3D model.pdf",
    "parts": "MIL-DTL-28840_12F w_AMENDMENT 3 parts list.pdf",
    "inspection": "MIL-DTL-28840_12F w_AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28840_12_2E_-freecad.png",
    "pair": "Models/views/M28840_12_2E_-pair.png",
    "record": "Models/views/M28840_12_2E_-record.png",
    "front": "Models/views/M28840_12_2E_-front.png",
    "top": "Models/views/M28840_12_2E_-top.png",
    "right": "Models/views/M28840_12_2E_-right.png",
    "cut": "Models/views/M28840_12_2E_-cut.png"
   },
   "shown_part": "M28840/12*2E***",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-DTL-28840/12F box mounting receptacle for both lengths, Figure 1 (1.625 max) and Figure 2 (2.062 max), at each of the nine shell size designators A (11) to J (33): a front shell of diameter N, a square flange S wide and .100 to .130 thick with four T holes on the R square, and a rear body of diameter GG with the .015 rear chamfer.",
   "not_modeled": [
    "The front end of the connector (coupling thread, shell bore, master polarizing keyway and alternate key positions 1 to 6), which the figures send to MIL-DTL-28840; the front shell is a solid cylinder at N max with no bore.",
    "The insert arrangements of MIL-STD-1698, the crimp contacts of styles P, S, D, E, F and G, the resilient wire separator of figure 1 and the wire seal grommet of figure 2; the solids have no insert cavity.",
    "The clipped flange corners the figures draw without a size; the solids have square corners.",
    "The small undimensioned step and chamfer at the front end of the shell drawn in the side view.",
    "The O reference mating hole and the .188 max panel thickness, which belong to the panel; the solids are checked to pass through O over the length ahead of the flange.",
    "Part numbers that differ only in class code (A, B, F, L, S), insert arrangement, contact designator or key position share their figure and shell size's envelope; the sheet does not list the insert arrangements, so those part numbers are not enumerated."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 3d90228ea978.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,127 of 1,150 items agreed. All 29 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 6 tables (157 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "18 solids in STEP AP242. 522 of 522 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 3 (all previous amendments incorporated), 2 July 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives the front shell and rear body only as N and GG maximum diameters and sends the front end configuration to MIL-DTL-28840, which is not in the package, so an engineer must take the coupling thread, bore and keyway dimensions from MIL-DTL-28840 before the solids are used for mating checks."
   ]
  },
  {
   "id": "MIL-DTL-28840/15E w/AMENDMENT 4",
   "slug": "mil-dtl-28840-15e-w-amendment-4",
   "title": "Connectors, accessories, electrical, circular, threaded, high shock, high density, shipboard, protective cover, plug",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-28840_15E w_AMENDMENT 4 Connectors, accessories",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 18,
   "dimensions": 126,
   "dimensions_met": 126,
   "kind": "Detail specification sheet",
   "dated": "12 March 2024",
   "status": "Active, 12 March 2024",
   "newest": "Revision E Amendment 4 (all previous amendments incorporated), 12 March 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 3,
   "by_class": {
    "Virginia": 3
   },
   "stock_examples": [
    "5935-01-514-9669, cover, electrical connector, M28840/15CBD (Virginia)",
    "5935-01-514-9671, cover, electrical connector, M28840/15EBD (Virginia)",
    "5935-01-516-4035, cover, electrical connector, M28840/15AAW (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-28840_15E w_AMENDMENT 4 package.pdf",
    "scan": "MIL-DTL-28840_15E w_AMENDMENT 4 legacy scan.pdf",
    "clean": "MIL-DTL-28840_15E w_AMENDMENT 4 clean copy.pdf",
    "record": "MIL-DTL-28840_15E w_AMENDMENT 4 validation record.pdf",
    "sheet": "MIL-DTL-28840_15E w_AMENDMENT 4 3D model.pdf",
    "parts": "MIL-DTL-28840_15E w_AMENDMENT 4 parts list.pdf",
    "inspection": "MIL-DTL-28840_15E w_AMENDMENT 4 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28840_15E_-freecad.png",
    "pair": "Models/views/M28840_15E_-pair.png",
    "record": "Models/views/M28840_15E_-record.png",
    "front": "Models/views/M28840_15E_-front.png",
    "top": "Models/views/M28840_15E_-top.png",
    "right": "Models/views/M28840_15E_-right.png",
    "cut": "Models/views/M28840_15E_-cut.png"
   },
   "shown_part": "M28840/15E**",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids for the nine shell size designators A (11) to J (33) of the MIL-DTL-28840/15E plug protective cover: the cover body (sleeve on the A thread major diameter, bore C to the .849/.859 floor, grip band of diameter B from the .63 max shoulder to the 1.00 max end face), shared by both chain attachments and all five material and finish designators, and the ring of chain attachment B (inside diameter D, .115 wide, .03 stock, tab bent 30 degrees).",
   "not_modeled": [
    "The optional fluorosilicone gasket of .032 stock on the floor of the bore, which is optional provided the air leakage test is met.",
    "The rivet on the end face, the .047 max space between the end face and the rivet head where the chain end sits, and the link chain of 5.0 \u00b11 links.",
    "The chain-end fastener of chain attachment A (shape optional) and its .146/.166 hole, and the chain attachment on the ring tab (attachment method optional).",
    "The A thread form (pitch, lead, double start and class) and the thread relief between the .45 min complete threads and the .63 max shoulder.",
    "The knurl on the grip band, the rounded corners drawn at the closed end, the marking, and the materials and finishes of table I.",
    "Interface dimensions that conform to MIL-DTL-28840, which is not in the package."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 d949d43c9392.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "592 of 667 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "26 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (92 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "18 solids in STEP AP242. 126 of 126 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 4 (all previous amendments incorporated), 12 March 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The table heads the A thread class 2B, which is the internal thread class, but Figure 1 draws the A thread on the outside of the cover sleeve, where it takes the plug's internal coupling thread; the class of this external thread needs to be confirmed.",
    "Model. Every A thread designation prints the pitch as 1P, which cannot hold with a .2 lead double start thread (pitch = lead / 2 = .1); the designations need to be corrected to .1P."
   ]
  },
  {
   "id": "MIL-DTL-28840/17E w/AMENDMENT 1",
   "slug": "mil-dtl-28840-17e-w-amendment-1",
   "title": "Connectors, electrical, circular, threaded, high shock, high density, shipboard, crimp contacts, plug assembly, open wire, classes D, DS, P, T, and Z",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-28840_17E w_AMENDMENT 1 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 9,
   "dimensions": 135,
   "dimensions_met": 135,
   "kind": "Detail specification sheet",
   "dated": "9 May 2019",
   "status": "Active, 13 March 2024",
   "newest": "Revision E Notice 1 - Validation, 13 March 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 18,
   "by_class": {
    "Virginia": 3,
    "Los Angeles": 5,
    "Seawolf": 10
   },
   "stock_examples": [
    "5935-01-514-8042, connector, plug, electrical, M28840/17AD1P2 (Virginia)",
    "5935-01-516-4087, connector, plug, electrical, M28840/17AH1P1 (Virginia)",
    "5935-01-516-4090, connector, plug, electrical, M28840/17AJ1P1 (Virginia)",
    "5935-01-497-2408, connector, plug, electrical, M28840/17AD1F1 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-28840_17E w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-28840_17E w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-28840_17E w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-28840_17E w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-28840_17E w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-28840_17E w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-28840_17E w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28840_17_E_-freecad.png",
    "pair": "Models/views/M28840_17_E_-pair.png",
    "record": "Models/views/M28840_17_E_-record.png",
    "front": "Models/views/M28840_17_E_-front.png",
    "top": "Models/views/M28840_17_E_-top.png",
    "right": "Models/views/M28840_17_E_-right.png",
    "cut": "Models/views/M28840_17_E_-cut.png"
   },
   "shown_part": "M28840/17*E***",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-DTL-28840/17E open wire plug assembly for each of the nine shell size designators A (11) to J (33) (M28840/17*A*** to M28840/17*J***): a body of the Q maximum diameter holding the B coupling thread at the front and a rear cable clamp of the maximum OD over the rear clamps with the F cable entry, L long.",
   "not_modeled": [
    "The plug and backshell outlines Figure 1 draws (front shell and keys, knurled coupling nut, flange, backshell and its knurled ring, the tapered section to the clamp, the clamp saddle bars and two screws), which this sheet does not dimension and refers to MIL-DTL-28840/16, MIL-DTL-28840/1 and MIL-DTL-28840.",
    "The three clearance holes for .032 diameter safety wire, 120 degrees apart, which Figure 1 shows without a hole size or location.",
    "The B thread form (.1 pitch, .2 lead, double start, class 2B); the coupling thread is a plain bore at its major diameter.",
    "The clamp's travel between F open and F closed; each solid carries one round cable entry at the middle of the range.",
    "Insert arrangements (MIL-STD-1698), crimp contacts of styles P, S, D, E, F and G, key positions 1 to 6 and the PIN marking; the interior behind the cable entry is solid.",
    "Part numbers that differ only in class code (A, B, F, L, S), insert arrangement, contact style or keying (the * positions of each assembly PIN) share their shell size's solid; the sheet does not list the insert arrangements, so those part numbers are not enumerated."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 1 scanned. SHA-256 7d51ec0910a8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "524 of 542 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (126 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 135 of 135 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 1 - Validation, 13 March 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. This sheet and MIL-DTL-28840/16 give no length for the coupling nut, backshell or clamp, no thread length and no backshell diameter between the coupling nut and the clamp; the solids use a Q cylinder to the clamp, an assumed .500 thread depth and a clamp one quarter of its OD long, so an engineer must take the backshell and clamp dimensions from MIL-DTL-28840/1, and confirm the coupling nut and thread lengths, which MIL-DTL-28840 does not give either, before the solids are used for anything closer than a space claim."
   ]
  },
  {
   "id": "MIL-DTL-28840/20H w/AMENDMENT 1",
   "slug": "mil-dtl-28840-20h-w-amendment-1",
   "title": "Connectors, electrical, circular, threaded, high shock, high density, shipboard, crimp contacts, receptacle, wall mounting assembly, straight, classes DJ, djs, PJ, TJ and ZJ",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-28840_20H w_AMENDMENT 1 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 28,
   "dimensions": 784,
   "dimensions_met": 784,
   "kind": "Detail specification sheet",
   "dated": "12 June 2019",
   "status": "Active, 23 July 2024",
   "newest": "Revision H Notice 2 - Validation, 23 July 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Ohio": 1
   },
   "stock_examples": [
    "5935-01-515-9390, connector, receptacle, electrical, M28840/20CA1ABS1 (Virginia)",
    "5935-01-235-9540, connector, plug, electrical, M28840/20CF1CAP1 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-28840_20H w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-28840_20H w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-28840_20H w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-28840_20H w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-28840_20H w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-28840_20H w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-28840_20H w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28840_20_D_C_-freecad.png",
    "pair": "Models/views/M28840_20_D_C_-pair.png",
    "record": "Models/views/M28840_20_D_C_-record.png",
    "front": "Models/views/M28840_20_D_C_-front.png",
    "top": "Models/views/M28840_20_D_C_-top.png",
    "right": "Models/views/M28840_20_D_C_-right.png",
    "cut": "Models/views/M28840_20_D_C_-cut.png"
   },
   "shown_part": "M28840/20*D*C***",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 28 MIL-DTL-28840/20 straight receptacle wall mounting assemblies of Figure 1, one per shell size and backshell designator (M28840/20*A*A*** to M28840/20*J*B***): a body carrying the B coupling thread at the front, the square MIL-DTL-28840/10 mounting flange S wide and .100 to .130 thick with its front face .878 to .898 from the front and four T holes on the R square, and a cable clamp of height E with the A cable entry at the rear, L long.",
   "not_modeled": [
    "The clipped flange corners that MIL-DTL-28840/10 draws without a size; the flange has square corners.",
    "The receptacle and backshell outlines Figure 1 draws (front shell pilot and neck, receptacle body behind the flange, knurled backshell coupling nut, backshell body, clamp saddle bars and screws), which neither this sheet nor MIL-DTL-28840/10 dimensions; the backshell is left to MIL-DTL-28840/6.",
    "The 2.062 max receptacle length of MIL-DTL-28840/10, which ends inside the backshell; the solid has no joint between receptacle and backshell.",
    "The O reference mounting hole and the .188 max panel thickness of MIL-DTL-28840/10, which belong to the panel; the solids are checked to pass through O over the length ahead of the flange.",
    "The B thread form (.1 pitch, .2 lead, double start) and the backshell-to-receptacle thread; the coupling thread is a plain cylinder at its major diameter.",
    "The clamp's travel between A min and A max; each solid carries one cable entry at the middle of the range.",
    "Insert arrangements (MIL-STD-1698), crimp contacts of styles P, S, D, E, F and G, the polarizing keys of key positions 1 to 6 and the PIN marking; the front of the receptacle and the interior behind the cable entry are solid.",
    "Part numbers that differ only in class code (C, E, G, M, U), insert arrangement, backshell style, contact designator or key position (the * positions of each assembly PIN) share their row's solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 69ef7905ff51.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "816 of 833 items agreed. All 17 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 5 tables (400 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "28 solids in STEP AP242. 784 of 784 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Notice 2 - Validation, 23 July 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Neither this sheet nor MIL-DTL-28840/10 gives an outside diameter or length for the backshell or its coupling nut, or a clamp width or length; the solids carry the receptacle flange and front shell but model the backshell as a cylinder at the B diameter ending in an E diameter clamp, so an engineer must take the backshell and coupling nut dimensions from MIL-DTL-28840/6, which is not in the library before the solids are used for space claim or interference checks."
   ]
  },
  {
   "id": "MIL-DTL-28840/21G w/AMENDMENT 2",
   "slug": "mil-dtl-28840-21g-w-amendment-2",
   "title": "Connectors, electrical, circular, threaded, high shock, high density, shipboard, crimp contacts, receptacle, cable connecting assembly, straight, classes DJ, djs, PJ, TJ and ZJ",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-28840_21G w_AMENDMENT 2 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 28,
   "dimensions": 504,
   "dimensions_met": 504,
   "kind": "Detail specification sheet",
   "dated": "27 July 2021",
   "status": "Active, 27 April 2026",
   "newest": "Revision G Notice 1 - Validation, 27 April 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 7,
   "by_class": {
    "Virginia": 7
   },
   "stock_examples": [
    "5935-01-514-7817, connector, plug, electrical, M28840/21CH1BBP1 (Virginia)",
    "5935-01-514-7823, connector, plug, electrical, M28840/21CH1BBP2 (Virginia)",
    "5935-01-514-8097, connector, plug, electrical, M28840/21CJ1ABS2 (Virginia)",
    "5935-01-514-9689, connector, plug, electrical, M28840/21CJ1BBS1 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-28840_21G w_AMENDMENT 2 package.pdf",
    "scan": "MIL-DTL-28840_21G w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-DTL-28840_21G w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-DTL-28840_21G w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-DTL-28840_21G w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-DTL-28840_21G w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-DTL-28840_21G w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28840_21_D_C_-freecad.png",
    "pair": "Models/views/M28840_21_D_C_-pair.png",
    "record": "Models/views/M28840_21_D_C_-record.png",
    "front": "Models/views/M28840_21_D_C_-front.png",
    "top": "Models/views/M28840_21_D_C_-top.png",
    "right": "Models/views/M28840_21_D_C_-right.png",
    "cut": "Models/views/M28840_21_D_C_-cut.png"
   },
   "shown_part": "M28840/21*D*C***",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 28 MIL-DTL-28840/21 straight receptacle cable connecting assemblies of Figure 1, one per shell size and backshell designator (M28840/21*A*A*** to M28840/21*J*B***): a body carrying the B coupling thread at the front, the MIL-DTL-28840/11 receptacle flange .100 to .130 thick with its front face .878 to .898 from the front, round top and bottom on the S diameter and two flats R apart, and a cable clamp of height E with the A cable entry at the rear, L long.",
   "not_modeled": [
    "The receptacle and backshell outlines Figure 1 draws (front shell pilot and neck, receptacle body behind the flange, knurled backshell coupling nut, backshell body, clamp saddle bars and screws), which neither this sheet nor MIL-DTL-28840/11 dimensions; the backshell is left to MIL-DTL-28840/6.",
    "The 2.062 max receptacle length of MIL-DTL-28840/11, which ends inside the backshell; the solid has no joint between receptacle and backshell.",
    "The orientation of the flange flats to datum A is set by the assumed keyway direction and is not measured, since the keyway is not modeled.",
    "The B thread form (.1 pitch, .2 lead, double start) and the backshell-to-receptacle thread; the coupling thread is a plain cylinder at its major diameter.",
    "The clamp's travel between A min and A max; each solid carries one cable entry at the middle of the range.",
    "Insert arrangements (MIL-STD-1698), crimp contacts of styles P, S, D, E, F and G, the polarizing keys of key positions 1 to 6 and the PIN marking; the front of the receptacle and the interior behind the cable entry are solid.",
    "Part numbers that differ only in class code, insert arrangement, backshell style, contact designator or key position (the * positions of each assembly PIN) share their row's solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 eda975b55189.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "686 of 701 items agreed. All 19 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (290 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "28 solids in STEP AP242. 504 of 504 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Notice 1 - Validation, 27 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Neither this sheet nor MIL-DTL-28840/11 gives an outside diameter or length for the backshell or its coupling nut, or a clamp width or length; the solids carry the receptacle flange and front shell but model the backshell as a cylinder at the B diameter ending in an E diameter clamp, so an engineer must take the backshell and coupling nut dimensions from MIL-DTL-28840/6, which is not in the library before the solids are used for space claim or interference checks."
   ]
  },
  {
   "id": "MIL-DTL-28840/26E w/AMENDMENT 1",
   "slug": "mil-dtl-28840-26e-w-amendment-1",
   "title": "Connectors, electrical, circular, threaded, high density, high shock, shipboard, crimp contacts, plug assembly, straight, classes DJ, djs, PJ, TJ, and ZJ",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-28840_26E w_AMENDMENT 1 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 25,
   "dimensions": 275,
   "dimensions_met": 275,
   "kind": "Detail specification sheet",
   "dated": "8 February 2019",
   "status": "Active, 5 February 2024",
   "newest": "Revision E Notice 1 - Validation, 5 February 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 22,
   "by_class": {
    "Virginia": 20,
    "Ohio": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5935-01-514-5555, connector, plug, electrical, M28840/26CJ1BAP2 (Virginia)",
    "5935-01-514-5558, connector, plug, electrical, M28840/26CJ1BAP3 (Virginia)",
    "5935-01-514-5559, connector, plug, electrical, M28840/26CJ1BAP1 (Virginia)",
    "5935-01-514-5603, connector, plug, electrical, M28840/26CH1BAP5 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-28840_26E w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-28840_26E w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-28840_26E w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-28840_26E w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-28840_26E w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-28840_26E w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-28840_26E w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28840_26_E_A_-freecad.png",
    "pair": "Models/views/M28840_26_E_A_-pair.png",
    "record": "Models/views/M28840_26_E_A_-record.png",
    "front": "Models/views/M28840_26_E_A_-front.png",
    "top": "Models/views/M28840_26_E_A_-top.png",
    "right": "Models/views/M28840_26_E_A_-right.png",
    "cut": "Models/views/M28840_26_E_A_-cut.png"
   },
   "shown_part": "M28840/26*E*A***",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 25 MIL-DTL-28840/26 straight plug assemblies of Figure 1, one per shell size and backshell designator (M28840/26*A*A*** to M28840/26*J*B***): the MIL-DTL-28840/16 plug envelope, Q max in diameter and 1.938 max long, holding the B coupling thread at the front, a backshell body behind it and a cable clamp of height E with the A cable entry at the rear, L long.",
   "not_modeled": [
    "The plug outline inside its MIL-DTL-28840/16 envelope (front shell and insert, knurled coupling ring, flanges) and the backshell outline (backshell nut, clamp saddle bars and screws), which neither this sheet nor MIL-DTL-28840/16 dimensions; the backshell is in MIL-DTL-28840/6.",
    "The B thread form (.1 pitch, .2 lead, double start, class 2B) and the backshell-to-plug thread; the coupling thread is a plain bore at its major diameter.",
    "The clamp's travel between A min and A max; each solid carries one cable entry at the middle of the range.",
    "Insert arrangements (MIL-STD-1698), crimp contacts of styles P, S, D, E, F and G, key positions 1 to 6 and the PIN marking; the interior behind the cable entry is solid.",
    "Part numbers that differ only in class code, insert arrangement, backshell style, contact designator or key position (the * positions of each assembly PIN) share their row's solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 46ad8ee59d83.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "757 of 770 items agreed. All 13 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 5 tables (335 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "25 solids in STEP AP242. 275 of 275 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 1 - Validation, 5 February 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. This sheet and MIL-DTL-28840/16 give no outside diameter or length for the backshell, no clamp width or length and no thread length; the solids use an assumed .0625 wall over B behind the plug and an E/2 clamp, so an engineer must take the backshell and clamp dimensions from MIL-DTL-28840/6, and confirm the thread length, which MIL-DTL-28840 does not give either, before the solids are used for space claim or interference checks.",
    "Model. Figure 1 continued (pages 2 and 3) prints designator B (15) on the row for assembly M28840/26*C*A*** with connector M28840/16*C***, while every other shell size 15 row reads C (15); the solid follows the PIN (shell C), and the designator must be confirmed."
   ]
  },
  {
   "id": "MIL-DTL-28840/28G w/AMENDMENT 1",
   "slug": "mil-dtl-28840-28g-w-amendment-1",
   "title": "Connectors, electrical, circular, threaded, high density, high shock, shipboard, crimp contacts, plug assembly, 90\u00b0, classes DJ, djs, PJ, TJ, and ZJ",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-28840_28G w_AMENDMENT 1 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 56,
   "dimensions": 728,
   "dimensions_met": 728,
   "kind": "Detail specification sheet",
   "dated": "8 February 2019",
   "status": "Active, 7 February 2024",
   "newest": "Revision G Notice 1 - Validation, 7 February 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 27,
   "by_class": {
    "Virginia": 20,
    "Los Angeles": 6,
    "Seawolf": 1
   },
   "stock_examples": [
    "5935-01-514-5501, connector, plug, electrical, M28840/28CC1DAP4 (Virginia)",
    "5935-01-514-5504, connector, plug, electrical, M28840/28CC1DAP5 (Virginia)",
    "5935-01-514-5511, connector, plug, electrical, M28840/28CC1DAP2 (Virginia)",
    "5935-01-514-5513, connector, plug, electrical, M28840/28CC1DAP3 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-28840_28G w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-28840_28G w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-28840_28G w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-28840_28G w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-28840_28G w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-28840_28G w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-28840_28G w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28840_28_D_CA_-freecad.png",
    "pair": "Models/views/M28840_28_D_CA_-pair.png",
    "record": "Models/views/M28840_28_D_CA_-record.png",
    "front": "Models/views/M28840_28_D_CA_-front.png",
    "top": "Models/views/M28840_28_D_CA_-top.png",
    "right": "Models/views/M28840_28_D_CA_-right.png",
    "cut": "Models/views/M28840_28_D_CA_-cut.png"
   },
   "shown_part": "M28840/28*D*CA**",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 56 MIL-DTL-28840/28 90 degree plug assemblies of Figure 1, one per shell size, backshell designator and style (M28840/28*A*AA** to M28840/28*J*BB**): a plug at the MIL-DTL-28840/16 maximum diameter and length holding the B coupling thread at the front, a back shell leg to a rounded bend, and a vertical leg on the Q centerline whose outside falls at L, ending in a cable clamp of width E with the A cable entry, H or N below the plug axis.",
   "not_modeled": [
    "The plug and back shell outlines Figure 1 draws (front shell, insert and keys, knurled coupling ring, flanges, back shell coupling nut, clamp saddle bars, ears and screws); MIL-DTL-28840/16 gives only the plug's maximum diameter and length, which the solids carry as one cylinder, and the back shell outline is in MIL-DTL-28840/8.",
    "The B thread form (.1 pitch, .2 lead, double start, class 2B) and the back shell to plug thread; the coupling thread is a plain bore at its major diameter.",
    "The clamp's travel between A min and A max; each solid carries one cable entry at the middle of the range.",
    "Insert arrangements (MIL-STD-1698), crimp contacts of styles P, S, D, E, F and G, key positions 1 to 6, the classes and their materials, and the PIN marking; the interior behind the coupling bore and the cable entry is solid.",
    "Part numbers that differ only in class code, insert arrangement, contact designator or key position (the * positions of each assembly PIN) share their row's solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 1feee64010df.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,303 of 1,377 items agreed. All 78 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 7 tables (906 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "56 solids in STEP AP242. 728 of 728 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Notice 1 - Validation, 7 February 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 draws L ending at the right end of the cable clamp, in line with E, but L max - Q max is larger than E/2 on every row (.833 against .469 for M28840/28*A*AA**, 1.583 against 1.375 for M28840/28*J*BA**), so no clamp centred on Q reaches L; the solids take L to the outside of a vertical leg 2(L - Q) in diameter, wider than the clamp, and an engineer must confirm which feature L locates.",
    "Model. This sheet and MIL-DTL-28840/16 give no back shell outside diameter or clamp length, and neither MIL-DTL-28840/16 nor MIL-DTL-28840 gives the coupling thread length; the solids use back shell legs of diameter 2(L - Q), an E/2 clamp and a .500 deep thread bore, so an engineer must take the back shell and clamp dimensions from MIL-DTL-28840/8 and confirm the thread length before the solids are used for space claim or interference checks."
   ]
  },
  {
   "id": "MIL-DTL-28840/29G w/AMENDMENT 1",
   "slug": "mil-dtl-28840-29g-w-amendment-1",
   "title": "Connectors, electrical, circular, threaded, high shock, high density, shipboard, crimp contacts, plug assembly, 45\u00ba, classes DJ, djs, PJ, TJ, and ZJ",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-28840_29G w_AMENDMENT 1 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 56,
   "dimensions": 664,
   "dimensions_met": 664,
   "kind": "Detail specification sheet",
   "dated": "8 February 2019",
   "status": "Active, 6 February 2024",
   "newest": "Revision G Notice 1 - Validation, 6 February 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 38,
   "by_class": {
    "Virginia": 19,
    "Los Angeles": 16,
    "Ohio": 3
   },
   "stock_examples": [
    "5935-01-514-7849, connector, plug, electrical, M28840/29CG1AAP4 (Virginia)",
    "5935-01-514-7852, connector, plug, electrical, M28840/29CG1AAP3 (Virginia)",
    "5935-01-514-7865, connector, plug, electrical, M28840/29CG1BAP2 (Virginia)",
    "5935-01-514-7881, connector, plug, electrical, M28840/29CG1CAP1 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-28840_29G w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-28840_29G w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-28840_29G w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-28840_29G w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-28840_29G w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-28840_29G w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-28840_29G w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28840_29_D_CA_-freecad.png",
    "pair": "Models/views/M28840_29_D_CA_-pair.png",
    "record": "Models/views/M28840_29_D_CA_-record.png",
    "front": "Models/views/M28840_29_D_CA_-front.png",
    "top": "Models/views/M28840_29_D_CA_-top.png",
    "right": "Models/views/M28840_29_D_CA_-right.png",
    "cut": "Models/views/M28840_29_D_CA_-cut.png"
   },
   "shown_part": "M28840/29*D*CA**",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 56 MIL-DTL-28840/29 45 degree plug assemblies of Figure 1, one per shell size, backshell designator and style (M28840/29*A*AA** to M28840/29*J*BB**): a plug at the MIL-DTL-28840/16 maximum diameter and length holding the B coupling thread at the front, a straight back shell body to a rounded bend at Q, and an angled body ending in a cable clamp of width E with the A cable entry, H or M along the angled axis and L or N overall.",
   "not_modeled": [
    "The plug and back shell outlines Figure 1 draws (front shell and insert, knurled coupling ring, flanges, back shell coupling nut, clamp saddle bars, ears and screws); MIL-DTL-28840/16 gives only the plug's maximum diameter and length, which the solids carry as one cylinder, and the back shell outline is in MIL-DTL-28840/9.",
    "The B thread form (.1 pitch, .2 lead, double start, class 2B) and the back shell to plug thread; the coupling thread is a plain bore at its major diameter.",
    "The clamp's travel between A min and A max; each solid carries one cable entry at the middle of the range.",
    "Insert arrangements (MIL-STD-1698), crimp contacts of styles P, S, D, E, F and G, key positions 1 to 6, the classes and their materials, and the PIN marking; the interior behind the coupling bore and the cable entry is solid.",
    "Part numbers that differ only in class code, insert arrangement, contact designator or key position (the * positions of each assembly PIN) share their row's solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, 0 scanned. SHA-256 0e506e45649b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,620 of 1,720 items agreed. All 66 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 10 tables (1,186 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "56 solids in STEP AP242. 664 of 664 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Notice 1 - Validation, 6 February 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 continued gives no L, N or Q for M28840/29*G*AA**, *G*AB**, *G*BA** and *G*BB** (back shells M28840/916 and M28840/917): the page 7 table ends at shell size F and the page 10 table starts at M28840/29*G*CA**, so these four solids place the bend at Q 3.806 from the other shell size G rows and their overall length is unchecked.",
    "Model. M28840/29*E*AB** prints N 6.282 (159.56), while its style A partner prints L 7.938 and every other style pair prints L - N = 1.676 (H - M = 2.370 along the 45 degree axis), which gives 6.262, the N printed for the other assemblies with M 3.312 and Q 3.556; the solid meets 6.282 max, and the value must be confirmed.",
    "Model. This sheet and MIL-DTL-28840/16 give no back shell outside diameter, clamp length or clamp end shape, and neither MIL-DTL-28840/16 nor MIL-DTL-28840 gives the coupling thread length; the solids use a back shell body with an assumed .0625 wall over B, an E/2 clamp cut square at L or N and a .500 deep thread bore, so an engineer must take the back shell and clamp dimensions from MIL-DTL-28840/9 and confirm the thread length before the solids are used for space claim or interference checks."
   ]
  },
  {
   "id": "MIL-DTL-3661E",
   "slug": "mil-dtl-3661e",
   "title": "Lampholders, indicator lights, indicator light housings, and indicator light lenses, general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-3661E Lampholders, indicator lights",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 28,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "04 December 2018",
   "status": "Active, 27 December 2023",
   "newest": "Revision E Notice 1 - Validation, 27 December 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1
   },
   "stock_examples": [
    "6210-00-050-0580, lens, light, MIL-DTL-3661 (Los Angeles, Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-3661E package.pdf",
    "scan": "MIL-DTL-3661E legacy scan.pdf",
    "clean": "MIL-DTL-3661E clean copy.pdf",
    "record": "MIL-DTL-3661E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "28 pages, 0 scanned. SHA-256 c8857a1ad22e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "8,804 of 8,818 items agreed. All 11 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "84 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "28 pages of searchable text, 12 tables (347 cells), 8 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-3661E is a general specification for lampholders, indicator lights, indicator-light housings and lenses that sets materials, type designations, lens color, transmittance and material codes (Tables I to III), and the inspection and test program, and leaves the shape and dimensions of each part to the individual specification sheets (3.2, 3.4); its dimensioned figures show only the candelabra socket moving-contact check (Figure 1), single-size test plugs (Figures 2 to 6) and the J-slot test insertion depth D of .255 or .316 inch (Figure 7), with no table giving part dimensions by size or dash number.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 1 - Validation, 27 December 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-3661/11C",
   "slug": "mil-dtl-3661-11c",
   "title": "Lampholders, indicator lights, indicator-light housings and indicator-light lenses, (flat, rotatable) dust-tight, lens, style LC11",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-3661_11C Lampholders, indicator lights",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 17,
   "dimensions": 204,
   "dimensions_met": 204,
   "kind": "Detail specification sheet",
   "dated": "7 July 2024",
   "status": "Active, 7 July 2024",
   "newest": "Revision C, 7 July 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1
   },
   "stock_examples": [
    "6210-00-050-0580, lens, light, MIL-DTL-3661/11 (Los Angeles, Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-3661_11C package.pdf",
    "scan": "MIL-DTL-3661_11C legacy scan.pdf",
    "clean": "MIL-DTL-3661_11C clean copy.pdf",
    "record": "MIL-DTL-3661_11C validation record.pdf",
    "sheet": "MIL-DTL-3661_11C 3D model.pdf",
    "parts": "MIL-DTL-3661_11C parts list.pdf",
    "inspection": "MIL-DTL-3661_11C inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/LC11BT2-freecad.png",
    "pair": "Models/views/LC11BT2-pair.png",
    "record": "Models/views/LC11BT2-record.png",
    "front": "Models/views/LC11BT2-front.png",
    "top": "Models/views/LC11BT2-top.png",
    "right": "Models/views/LC11BT2-right.png",
    "cut": "Models/views/LC11BT2-cut.png"
   },
   "shown_part": "LC11BT2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style LC11 flat rotatable lens assembly, one for each of the 17 Table I type designations, all the same Figure 1 shape: a 15/32 flat lens face standing proud of a 9/16 holder, 17/32 from lens face to shoulder, and a 5/16-32 UNEF-2A stem 3/16 long, at nominal sizes.",
   "not_modeled": [
    "The internal construction: the lamp cavity for the T-1-3/4 midget flange base lamp, the lamp retainer (design optional) and the separate lens, holder and stem parts, none of which Figure 1 dimensions; each solid is one body.",
    "The knurl (design optional), the thread form, the rounded front corner of the holder and the hot-stamped or engraved legend on the lens face.",
    "Lens material, color and transmittance, the aluminum black-anodized holder and the brass white-nickel-plated stem, temperature cycling and dust-tight sealing; these are recorded as parameters only.",
    "The \u00b11/32 tolerances on 9/16, 15/32, 17/32 and 3/16 are checked but not built as limit-of-size variants, and the class 2A thread limits, which the sheet does not print, are not checked."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 e773d68102e5.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "408 of 408 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "8 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 3 tables (107 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "17 solids in STEP AP242. 204 of 204 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C, 7 July 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 draws a reduced-diameter end on the stem inside the 3/16 length but gives neither its diameter nor its length, so the length of full 5/16-32 UNEF-2A thread available to engage the LH73/1 holder is not defined."
   ]
  },
  {
   "id": "MIL-DTL-3661/6D",
   "slug": "mil-dtl-3661-6d",
   "title": "Lampholders, indicator-lights, indicator-light housings and indicator-light lenses dusttight housing, style LH74",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-3661_6D Lampholders, indicator-lights",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 5,
   "dimensions": 115,
   "dimensions_met": 115,
   "kind": "Detail specification sheet",
   "dated": "09 April 2019",
   "status": "Active, 24 July 2024",
   "newest": "Revision D Notice 2 - Validation, 24 July 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "6210-00-809-4274, housing, light, MIL-DTL-3661/6 (Virginia, Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-3661_6D package.pdf",
    "scan": "MIL-DTL-3661_6D legacy scan.pdf",
    "clean": "MIL-DTL-3661_6D clean copy.pdf",
    "record": "MIL-DTL-3661_6D validation record.pdf",
    "sheet": "MIL-DTL-3661_6D 3D model.pdf",
    "parts": "MIL-DTL-3661_6D parts list.pdf",
    "inspection": "MIL-DTL-3661_6D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/LH74_5-freecad.png",
    "pair": "Models/views/LH74_5-pair.png",
    "record": "Models/views/LH74_5-record.png",
    "front": "Models/views/LH74_5-front.png",
    "top": "Models/views/LH74_5-top.png",
    "right": "Models/views/LH74_5-right.png",
    "cut": "Models/views/LH74_5-cut.png"
   },
   "shown_part": "LH74/5",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style LH74 dusttight indicator-light housing, one for each of the five Table II type designations, all the same Figure 1 shape: a .553 front flange .031 thick with a .050 key standing .025 behind it, a .469-32UNS-2A bushing .563 long, a rear housing, and two slotted terminals reaching 1.016 behind the flange.",
   "not_modeled": [
    "The internal construction Figure 1 does not dimension: the lamp cavity for the C7A or C9A neon lamp, the internal resistor, the lens seat for the LC13 and LC28 lenses, the insulators and the rear center contact and strap drawn in the end view; each solid is one body.",
    "The MS25082-21 hex nut and the internal tooth lockwasher supplied on the bushing, which MS25082 and not this sheet dimensions.",
    "The thread form and class 2A limits, the rounded rear corner of the housing, the rounded terminal tips and the small boss at the terminal roots, none of which Figure 1 dimensions (Note 3 leaves housing and terminal design optional within the configuration shown).",
    "The recommended mounting hole, a panel feature; the key and rear housing are checked against it.",
    "Sand and dust performance, the 0.407 plug gage shank length (figure 6 of MIL-DTL-3661) and first article inspection; the internal resistor, lens and lamp are recorded as parameters only.",
    "The tolerances are checked but not built as limit-of-size variants."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 ebde981bd9fc.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "312 of 313 items agreed. All 1 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "38 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 4 tables (78 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "5 solids in STEP AP242. 115 of 115 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 2 - Validation, 24 July 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. .563 MIN is drawn with one arrow to the end of the bushing and no second extension line; the model takes it from the flange back face, where 1.016 MAX starts, but Figure 1 does not state its origin.",
    "Model. Figure 1 gives the key's width (.050) and projection (.025) but not its radial reach, so how far the key enters the .274 to .278 keyway of the recommended mounting hole is not defined."
   ]
  },
  {
   "id": "MIL-DTL-3786/13J",
   "slug": "mil-dtl-3786-13j",
   "title": "Switch, rotary, closed construction, .500 ampere, style SR13",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-3786_13J Switch, rotary",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 25,
   "solids": 48,
   "dimensions": 716,
   "dimensions_met": 716,
   "kind": "Detail specification sheet",
   "dated": "24 November 2024",
   "status": "Active, 24 November 2024",
   "newest": "Revision J, 24 November 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5930-01-497-2706, switch, rotary, M3786/13-5131 (Virginia)",
    "5930-00-408-8783, switch, rotary, M3786/13-0002 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-3786_13J package.pdf",
    "scan": "MIL-DTL-3786_13J legacy scan.pdf",
    "clean": "MIL-DTL-3786_13J clean copy.pdf",
    "record": "MIL-DTL-3786_13J validation record.pdf",
    "sheet": "MIL-DTL-3786_13J 3D model.pdf",
    "parts": "MIL-DTL-3786_13J parts list.pdf",
    "inspection": "MIL-DTL-3786_13J inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M3786_13-0583-freecad.png",
    "pair": "Models/views/M3786_13-0583-pair.png",
    "record": "Models/views/M3786_13-0583-record.png",
    "front": "Models/views/M3786_13-0583-front.png",
    "top": "Models/views/M3786_13-0583-top.png",
    "right": "Models/views/M3786_13-0583-right.png",
    "cut": "Models/views/M3786_13-0583-cut.png"
   },
   "shown_part": "M3786/13-0583",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style SR13 rotary switch of figure 1, one for each of the 48 outline shapes that the 2,967 table IV part numbers fall on (construction E with its non-turn device or construction F with its bushing flats, 1 to 12 decks, shaft-flat angle A of 15\u00b0 or 36\u00b0), each named by the first part number in table IV with that shape.",
   "not_modeled": [
    "Each part number is not a separate solid: the 989 rows of table IV name 2,967 part numbers that differ in outline only by construction style, deck count and angle A, so one representative solid is built per shape.",
    "Individual terminals and their positions for each angle of throw and pole count (figure 2: first terminal at 15\u00b0, 22.5\u00b0 or on the keyway line, 30\u00b0, 36\u00b0 or 45\u00b0 spacing, common terminals at \u00b118\u00b0), and the terminal opening for the .030 wire.",
    "The bushing keyway that figure 2 uses to orient the terminals, and the deck joint lines on the housing.",
    "Mounting hardware: two hexagon nuts .312 \u00b1.010 across flats by .062 \u00b1.010 thick and the internal tooth lockwasher .415 max OD.",
    "The .260 dia mounting hole with flats .210 \u00b1.003 apart for the F construction style, which is a panel cutout.",
    "Thread form of the .250-32 UNEF-2A bushing, the shaft-end chamfer, the shaft and bushing seals, the internal rotor, contacts, detent and stops, and the maximum weight of note 4 (19 grams for one deck plus 2.5 grams for each additional deck)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "25 pages, 1 scanned. SHA-256 75450eacf013.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "7,212 of 9,006 items agreed. 25 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "6,547 checks on size series and limits. 324 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "30 pages of searchable text, 6 tables (7,970 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "48 solids in STEP AP242. 716 of 716 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J, 24 November 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 2, callout beside C1 in the 30\u00b0 2 pole/deck and 4 pole/deck views: read as 22.5\u00b0 \u00b18\u00b0, could be 22.5\u00b0 +8\u00b0.",
    "Model. Note 5 measures angle A from a line perpendicular to the mounting bushing flats on both pages, but the E construction style is drawn with a round bushing and no flats; the model measures A from the line to the non-turn device, as the E style end view draws it.",
    "Model. Figure 2 orients the terminals by a bushing keyway at nine o'clock seen from the rear, but figure 1 shows no keyway on either construction style.",
    "Model. Figure 1 does not give the diameter of the deck sections, so how far the terminals (.800/.670 dia over terminals) stand out from the decks behind the .765 max body is not fixed.",
    "Model. The length for more than one deck is given as 1.01 max plus .268 for each additional deck, with no tolerance stated on the sum; the checks apply the \u00b1.015 of note 3 once to the added length."
   ]
  },
  {
   "id": "MIL-DTL-38999N w/AMENDMENT 2",
   "slug": "mil-dtl-38999n-w-amendment-2",
   "title": "Connectors, electrical, circular, miniature, high density, quick disconnect (bayonet, threaded or breech coupling), environment resistant with crimp removable contacts or hermetically sealed with fixed, solderable contacts, general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-38999N w_AMENDMENT 2 Connectors, electrical",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 158,
   "solids": 179,
   "dimensions": 2056,
   "dimensions_met": 2056,
   "kind": "Detail specification",
   "dated": "27 July 2026",
   "status": "Active, 27 July 2026",
   "newest": "Revision N Amendment 2 (all previous amendments incorporated), 27 July 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 7,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1,
    "Ohio": 3,
    "Seawolf": 2
   },
   "stock_examples": [
    "5935-01-514-7562, connector, plug, electrical, MIL-DTL-38999 (Virginia)",
    "5935-01-043-6946, connector, receptacle, electrical, MIL-DTL-38999 (Los Angeles)",
    "5935-01-481-8646, connector, receptacle, electrical, MIL-C-38999 (Ohio)",
    "5935-01-481-9094, connector, receptacle, electrical, MIL-C-38999 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-38999N w_AMENDMENT 2 package.pdf",
    "scan": "MIL-DTL-38999N w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-DTL-38999N w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-DTL-38999N w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-DTL-38999N w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-DTL-38999N w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-DTL-38999N w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 72",
   "pictures": {
    "iso": "Models/views/MIL-DTL-38999_series_IV_receptacle_11_pin_insert-freecad.png",
    "pair": "Models/views/MIL-DTL-38999_series_IV_receptacle_11_pin_insert-pair.png",
    "record": "Models/views/MIL-DTL-38999_series_IV_receptacle_11_pin_insert-record.png",
    "front": "Models/views/MIL-DTL-38999_series_IV_receptacle_11_pin_insert-front.png",
    "top": "Models/views/MIL-DTL-38999_series_IV_receptacle_11_pin_insert-top.png",
    "right": "Models/views/MIL-DTL-38999_series_IV_receptacle_11_pin_insert-right.png",
    "cut": "Models/views/MIL-DTL-38999_series_IV_receptacle_11_pin_insert-cut.png"
   },
   "shown_part": "MIL-DTL-38999 series IV receptacle 11 pin insert",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the mating ends of MIL-DTL-38999 receptacles and plugs for series I and II (bayonet), III (threaded) and IV (breech) in every shell size, each with a pin insert and with a socket insert (figures 1 to 7), of the rear accessory interface end for every shell size (figures 8 to 10), and of the hermetic style P pin and style S socket contacts in every contact size (figure 12).",
   "not_modeled": [
    "Shell bodies behind the mating and accessory ends, mounting flanges and jam nuts, and the outer shapes of the series III coupling nut and series IV coupling ring are defined by the slash sheets, not this specification; the figure 3 flange (11.79 MIN face, K flycuts, E behind it) and the series IV flange, collar and rear shell (S, KK, JJ) are not modeled.",
    "Contacts are not placed in the connector solids, because insert arrangements come from MIL-STD-1560; the contact and gauge locations C, M, P, Y (series I to III), CC, EE, W (series IV) and the series IV plug 3.38 MAX and 15.82 MIN lengths therefore carry no feature, and the inserts are solid.",
    "Series I and II minor keys and keyways (XR, YR, ZR, XP, YP, ZP; .063 and .052 wide) and the alternate main key positions A to D, the series III alternate polarizations A to E, and the whole figure 7 series IV layout (main keys T1, T2, W1, W2, W3, polarizing keys and keyways Z, U, UU, breech lugs and their angles, MM, MMM, KK and the coupling ring keyways at M) are not modeled.",
    "EMI spring fingers and straps (FF, W', U', the .060, .172, .035 R, .76 and Detail XX 9.40 MAX dimensions), the three lock inspection holes of note 9, the helical ramp and detent of the bayonet grooves, and lengths the figures do not tie to a modeled feature (series I DD, series II .079 MAX and .005 MIN, series III 2.16 MIN, 1.93/1.60 and 14.05/13.72) are not modeled.",
    "Radii and chamfers are not modeled: the Detail A front edge radius or chamfer, projection tip and root radii, the .41 R thread chamfer radius, the 7 to 10 degree sealing bevel, the .062 land and .016 R of view C, and the hermetic socket entrance chamfer.",
    "Grommets, compound, potting forms and E-nuts of figures 8 to 10 (A, G, XP, YP, XE, .156 MAX, 2.16 MAX), the series II coupling nut design of figure 9 detail A (CC, B), the class J and M receptacle columns and jam-nut thread option, the composite plug U', and thread form, pitch, lead, class and plating allowance are not modeled.",
    "Figure 11 panel cutouts, the interface designs of figures 13 to 15, the gauges and test fixtures of figures 16 to 33, the style C pin feedthrough and the X and Z eyelet terminations of figure 12, the insert entry hole H and the .020 and .028 MIN contact setbacks are not modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "158 pages, 21 scanned. SHA-256 4f4ba147df5f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "35,871 of 36,964 items agreed. 603 differences went to a third reader. 2 readings remain open.",
     "result": "2 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "3,527 checks on size series and limits. 64 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "131 pages of searchable text, 94 tables (6,422 cells), 52 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "179 solids in STEP AP242. 2,056 of 2,056 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision N Amendment 2 (all previous amendments incorporated), 27 July 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 32, Equation in the constants box, last character of the first exponent: read as e-\u03b1t, could be e-\u03b1l.",
    "Open reading. Figure 32, Equation in the constants box, last character of the second exponent: read as e-\u03b2t, could be e-\u03b2l.",
    "Model. Figure 5 gives the series I and II minor key angles XR, YR and ZR (45, 88 and 27 degrees; 28, 100 and 37 degrees) without showing clearly where each arc starts: read as consecutive arcs between the two reference lines F below horizontal they total 160 and 165 degrees against the 170 and 160 degrees available, so the minor keys and keyways were left out until the engineer settles the reading.",
    "Model. Figure 3 prints two columns for the series III plug bore U, 'U dia min/max' (9.55 to 9.96 for shell size 9) and 'U dia +.13 -.03' (9.83, so 9.80 to 9.96); the solids use the second and meet both, and the engineer should confirm which governs.",
    "Model. Figure 4 gives no diameter for the series IV plug inserts and figure 7's lug and key layout was not modeled; the plug envelopes borrow the receptacle G and use M for the coupling ring cavity, which the engineer should confirm.",
    "Model. Figure 7 (page 111) prints R for the series IV shell size 11 coupling ring as 10\u00b047'; on every other size Q + R is 360 degrees, which for size 11 (Q 149\u00b013') gives 210\u00b047'. The solids do not use the figure 7 angles."
   ]
  },
  {
   "id": "MIL-DTL-38999/20H w/ AMENDMENT 1",
   "slug": "mil-dtl-38999-20h-w-amendment-1",
   "title": "Connectors, electrical, circular, receptacle, threaded, wall mounting flange, removable crimp contacts, series III, metric",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-38999_20H w_ AMENDMENT 1 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 18,
   "dimensions": 342,
   "dimensions_met": 342,
   "kind": "Detail specification sheet",
   "dated": "11 August 2022",
   "status": "Active, 11 August 2022",
   "newest": "Revision H Amendment 1 (amendment incorporated), 11 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-514-7147, connector, receptacle, electrical, MIL-DTL-38999/20 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-38999_20H w_ AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-38999_20H w_ AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-38999_20H w_ AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-38999_20H w_ AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-38999_20H w_ AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-38999_20H w_ AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-38999_20H w_ AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/D38999_20_E-freecad.png",
    "pair": "Models/views/D38999_20_E-pair.png",
    "record": "Models/views/D38999_20_E-record.png",
    "front": "Models/views/D38999_20_E-front.png",
    "top": "Models/views/D38999_20_E-top.png",
    "right": "Models/views/D38999_20_E-right.png",
    "cut": "Models/views/D38999_20_E-cut.png"
   },
   "shown_part": "D38999/20 E",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-DTL-38999/20 series III wall mounting flange receptacle for all nine shell sizes (9 to 25, codes A to J), each once for all classes except J and M (V, W, Z) and once for classes J and M (V', W', Z'): a square flange S by W with its mounting face at V from the front edge of the shell, four diagonal mounting slots P wide and PP long with end centers on the R1 and R2 squares, and a plain shell to Z max.",
   "not_modeled": [
    "Coupling thread, accessory thread, bore, insert, contacts and polarizing keys: the sheet refers interface dimensions to MIL-DTL-38999, insert arrangements to MIL-STD-1560 and the front and rear end configuration to the procurement specification; the solids are full envelopes.",
    "The red fully mated indicator band, 12.4/12.95 from the front edge of the shell to the back edge of the band (note 6), and the blue band, which are colored bands, not geometry.",
    "The flange corners, which the sheet calls chamfered or rounded at 4 places without a size; the solids have sharp corners.",
    "M max (note 5), the recommended largest mounting panel thickness, which is a limit on the panel, not on the connector; it is recorded as a parameter.",
    "The external bending moment for classes J and M and the Table I bending parameters, which are strength requirements.",
    "Class, insert arrangement, contact style and polarizing position, which do not change the dimensioned envelope."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 a951eb0efec6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "689 of 699 items agreed. All 8 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "56 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (180 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "18 solids in STEP AP242. 342 of 342 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 1 (amendment incorporated), 11 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no diameter for the shell, the coupling thread or the rear thread and sends interface dimensions to MIL-DTL-38999, so the shell diameter in the solids is a stand-in equal to R2 that an engineer must replace with the MIL-DTL-38999 series III values before using the solids for fit."
   ]
  },
  {
   "id": "MIL-DTL-38999/24J w/AMENDMENT 4",
   "slug": "mil-dtl-38999-24j-w-amendment-4",
   "title": "Connectors, electrical, circular, receptacle, threaded, jam-nut mounting, removable crimp contacts, series III, metric",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-38999_24J w_AMENDMENT 4 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 9,
   "dimensions": 123,
   "dimensions_met": 123,
   "kind": "Detail specification sheet",
   "dated": "11 August 2022",
   "status": "Active, 11 August 2022",
   "newest": "Revision J Amendment 4 (all previous amendments incorporated), 11 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-01-555-2956, connector body, receptacle, electr, MIL-DTL-38999/24 (Virginia)",
    "5935-01-725-1471, connector, receptacle, electrical, MIL-DTL-38999/24 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-38999_24J w_AMENDMENT 4 package.pdf",
    "scan": "MIL-DTL-38999_24J w_AMENDMENT 4 legacy scan.pdf",
    "clean": "MIL-DTL-38999_24J w_AMENDMENT 4 clean copy.pdf",
    "record": "MIL-DTL-38999_24J w_AMENDMENT 4 validation record.pdf",
    "sheet": "MIL-DTL-38999_24J w_AMENDMENT 4 3D model.pdf",
    "parts": "MIL-DTL-38999_24J w_AMENDMENT 4 parts list.pdf",
    "inspection": "MIL-DTL-38999_24J w_AMENDMENT 4 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/D38999_24_shell_size_17_E_-freecad.png",
    "pair": "Models/views/D38999_24_shell_size_17_E_-pair.png",
    "record": "Models/views/D38999_24_shell_size_17_E_-record.png",
    "front": "Models/views/D38999_24_shell_size_17_E_-front.png",
    "top": "Models/views/D38999_24_shell_size_17_E_-top.png",
    "right": "Models/views/D38999_24_shell_size_17_E_-right.png",
    "cut": "Models/views/D38999_24_shell_size_17_E_-cut.png"
   },
   "shown_part": "D38999/24 shell size 17 (E)",
   "application": "FreeCAD 1.1.4",
   "modeled": "Nine envelope solids of the jam-nut receptacle shell, one per shell size 9 to 25 (codes A to J), each standing for every class, insert arrangement, contact style and polarization of that shell size: front shell, flatted mounting thread G, the C collar where the table gives one, flange A with its O-ring groove, and rear shell.",
   "not_modeled": [
    "The MIL-DTL-38999/28 hex nut (S across flats) and the M25988/3 O-ring, separate parts supplied with the receptacle; the nut's thickness and seated position are not on this sheet.",
    "The front and rear end configuration that MIL-DTL-38999 and MIL-STD-1560 define: coupling thread, bore, insert, contacts, the master keyway at 90\u00b0 \u00b1 5\u00b0 and the rear accessory thread.",
    "The red fully mated indicator band at 12.4 / 12.95 from the front face, a marking.",
    "The optional countersink of note 8.",
    "The class J and M variants: overall shell length 33.0 max (note 10) and the 12.7 max dimension of detail D for shell sizes B and E.",
    "The thread form of G: pitch, 6g tolerance class and the 0.100 root radius.",
    "The external bending moment for classes J and M, a performance value, and the panel thickness of note 3."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 1 scanned. SHA-256 96c39bcb15ed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "670 of 676 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "32 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (153 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 123 of 123 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J Amendment 4 (all previous amendments incorporated), 11 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives the O-ring groove's width D and depth E but not its diameter in the flange face, which must be set from the M25988/3 O-ring dash number before the groove can be made."
   ]
  },
  {
   "id": "MIL-DTL-38999/26G w/AMENDMENT 4",
   "slug": "mil-dtl-38999-26g-w-amendment-4",
   "title": "Connectors, electrical, plug, circular, threaded, straight, removable crimp contacts, series III, metric",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-38999_26G w_AMENDMENT 4 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 18,
   "dimensions": 153,
   "dimensions_met": 153,
   "kind": "Detail specification sheet",
   "dated": "11 August 2022",
   "status": "Active, 11 August 2022",
   "newest": "Revision G Amendment 4 (all previous amendments incorporated), 11 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 2
   },
   "stock_examples": [
    "5935-01-514-7562, connector, plug, electrical, MIL-DTL-38999/26 (Virginia)",
    "5935-01-590-7810, connector body, plug, electrical, MIL-DTL-38999/26 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-38999_26G w_AMENDMENT 4 package.pdf",
    "scan": "MIL-DTL-38999_26G w_AMENDMENT 4 legacy scan.pdf",
    "clean": "MIL-DTL-38999_26G w_AMENDMENT 4 clean copy.pdf",
    "record": "MIL-DTL-38999_26G w_AMENDMENT 4 validation record.pdf",
    "sheet": "MIL-DTL-38999_26G w_AMENDMENT 4 3D model.pdf",
    "parts": "MIL-DTL-38999_26G w_AMENDMENT 4 parts list.pdf",
    "inspection": "MIL-DTL-38999_26G w_AMENDMENT 4 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MIL-DTL-38999_26_shell_size_9_A_classes_J_and_M_alternate-freecad.png",
    "pair": "Models/views/MIL-DTL-38999_26_shell_size_9_A_classes_J_and_M_alternate-pair.png",
    "record": "Models/views/MIL-DTL-38999_26_shell_size_9_A_classes_J_and_M_alternate-record.png",
    "front": "Models/views/MIL-DTL-38999_26_shell_size_9_A_classes_J_and_M_alternate-front.png",
    "top": "Models/views/MIL-DTL-38999_26_shell_size_9_A_classes_J_and_M_alternate-top.png",
    "right": "Models/views/MIL-DTL-38999_26_shell_size_9_A_classes_J_and_M_alternate-right.png",
    "cut": "Models/views/MIL-DTL-38999_26_shell_size_9_A_classes_J_and_M_alternate-cut.png"
   },
   "shown_part": "MIL-DTL-38999/26 shell size 9 (A), classes J and M alternate",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids, in millimetres, of the MIL-DTL-38999/26 straight plug for the nine shell sizes 9 to 25 (codes A to J) in both coupling nut designs of Figure 1: 9 with the knurled nut (front diameter B for the 4.7 front length, knurl diameter S, four recessed flats K across and 6.2 to 6.5 wide, overall length Z) and 9 with the alternate ribbed nut for classes J and M (front diameter B', diameter S with H ribs, overall length Z').",
   "not_modeled": [
    "The connector front and rear end configuration, interface dimensions, insert arrangements and contacts, which the sheet refers to MIL-DTL-38999, MIL-STD-1560 and the procurement specification; each solid is a closed envelope without the bore, insert, contacts or coupling and accessory threads.",
    "Class, insert arrangement, contact style and polarizing position do not change the outside envelope, so one solid stands for every PIN of a shell size and nut design.",
    "Class J and M plugs made with the knurled coupling nut of the upper views; the class J and M solids show the alternate ribbed nut.",
    "The knurl pattern, the groove between the two knurled bands and the chamfers at their ends, the blue color band and marking.",
    "The external bending moment for classes J and M, a test requirement."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 2f9d1f0dcbad.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "538 of 547 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "24 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 1 table (90 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "18 solids in STEP AP242. 153 of 153 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Amendment 4 (all previous amendments incorporated), 11 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Figure 1, column 'External bending moment, minimum, classes J and M (N\u2013m)': 80.941 then 69.81. Page 2 (page 2 and the PDF text layer) prints 80.941 for shell size 21 and 69.810 for shell size 23, the same series MIL-DTL-38999/20 prints and that this sheet's bending moment note says the plug values were set from; a size 21 minimum above the size 23 minimum breaks a column that otherwise rises with shell size, so the printed value itself looks wrong and is a point for an engineer.",
    "Model. Note 4 assigns B' and Z' to classes J and M, but the B' column is headed alternate design only and Figure 1 shows B' only on the ribbed nut, so the front diameter of a class J or M plug made with the knurled nut is not stated.",
    "Model. Figure 1 draws H on the alternate design as a width across one rib, while the table gives H as the maximum number of ribs (12 to 28), so no rib width is stated; the solids use 1.0 wide, 0.5 deep grooves between the ribs."
   ]
  },
  {
   "id": "MIL-DTL-5015H w/AMENDMENT 1",
   "slug": "mil-dtl-5015h-w-amendment-1",
   "title": "Connectors, electrical, circular threaded, AN type, general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-5015H w_AMENDMENT 1 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 75,
   "solids": 192,
   "dimensions": 2290,
   "dimensions_met": 2290,
   "kind": "Detail specification",
   "dated": "12 August 2008",
   "status": "Canceled, 23 December 2009",
   "newest": "Revision H Notice 1 - Cancellation, 23 December 2009",
   "superseding": "SAE-AS50151",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 202,
   "by_class": {
    "Virginia": 64,
    "Los Angeles": 51,
    "Ohio": 65,
    "Seawolf": 30
   },
   "stock_examples": [
    "5935-01-511-6350, connector, plug, electrical, MIL-DTL-5015 (Virginia)",
    "5935-01-513-2441, connector, plug, electrical, MIL-C-5015 (Virginia)",
    "5935-01-513-2447, connector, receptacle, electrical, MIL-C-5015 (Virginia)",
    "5935-01-513-2452, connector, receptacle, electrical, MIL-C-5015 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-5015H w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-5015H w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-5015H w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-5015H w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-5015H w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-5015H w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-5015H w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 2, page 15",
   "pictures": {
    "iso": "Models/views/MIL-DTL-5015_crimp_contact_back_end_shell_size_24_grommet_for_contact_sizes_16_and_12-freecad.png",
    "pair": "Models/views/MIL-DTL-5015_crimp_contact_back_end_shell_size_24_grommet_for_contact_sizes_16_and_12-pair.png",
    "record": "Models/views/MIL-DTL-5015_crimp_contact_back_end_shell_size_24_grommet_for_contact_sizes_16_and_12-record.png",
    "front": "Models/views/MIL-DTL-5015_crimp_contact_back_end_shell_size_24_grommet_for_contact_sizes_16_and_12-front.png",
    "top": "Models/views/MIL-DTL-5015_crimp_contact_back_end_shell_size_24_grommet_for_contact_sizes_16_and_12-top.png",
    "right": "Models/views/MIL-DTL-5015_crimp_contact_back_end_shell_size_24_grommet_for_contact_sizes_16_and_12-right.png",
    "cut": "Models/views/MIL-DTL-5015_crimp_contact_back_end_shell_size_24_grommet_for_contact_sizes_16_and_12-cut.png"
   },
   "shown_part": "MIL-DTL-5015 crimp contact back end shell size 24, grommet for contact sizes 16 and 12",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the MIL-DTL-5015 parts the specification dimensions by size: the plug and receptacle mating ends of figures 2 to 5 (series II front release and series III rear release and hermetic) in all 19 shell sizes 8S to 48, each with a pin insert and with a socket insert (152); the figure 1 crimp contact back end for each of its 15 shell size rows with each grommet height (30); and the figure 7 series I solder pin and socket contacts in contact sizes 16, 12, 8, 4 and 0 (10).",
   "not_modeled": [
    "Contacts and insert arrangements (MIL-STD-1651) in the connector solids: the pin tip positions (.219 to .312 and .062 to .125), the socket positions (.062 min and .080 min), the spring engagement limits (.281 and .328 max) and the figure 6 insert entry dimensions A, B, C, S, T and U with the .030 to .035 step; the inserts are solid.",
    "Plug: the second socket insert offset (.006 max on figure 2, .010 max on figure 4) to a surface the figures do not name, the coupling ring outer shape and its retention, the O-ring gasket option and the 45 degree chamfer of the coupling ring thread, which has no depth on a bore at the major diameter.",
    "Receptacle: the square mounting flange with its R .008 max corners and four holes, jam nuts and rear bodies, which the MS and SAE-AS sheets define.",
    "Back end: the .005 R max tooth root and .045 R max grommet corner (built sharp), the tapered grommet option, and the connector body beyond the WW shoulder.",
    "Figure 7: H (pin tip below the end of the shell, plug min and receptacle max), J (spring engagement below the end of the shell) and the .060 min socket recess, which place contacts in series I shells this specification does not dimension; the 16S row, which differs from size 16 only in H, so the size 16 solids stand for it; the optional .030 vent hole, the socket springs, the spherical radius value and the 32 finish.",
    "Thread form, pitch diameter and the class 2A and 2B limits of the A and V threads.",
    "Figures 8 to 10 (insulation resistance and service life curves, bending moment test set-up) and the test tables."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "75 pages, 7 scanned. SHA-256 081a34f536bd.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "16,934 of 17,262 items agreed. All 57 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1,106 checks on size series and limits. 73 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "42 pages of searchable text, 30 tables (2,014 cells), 10 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "192 solids in STEP AP242. 2,290 of 2,290 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision H Notice 1 - Cancellation, 23 December 2009.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Figure 4, column 'JJ \u00b10.011': 0.698 then 0.501. Page 20 prints 0.501 for shell 16S, as agreed, but every other S shell in this table prints 0.510 (J minus JJ is 0.060 for them and 0.069 here); 0.501 matches the figure 2 value and looks carried over, a point for an engineer.",
    "Printed value to confirm. Figure 5, column 'JJ \u00b10.015': 0.731 then 0.533. Page 22 prints 0.731 for shell 12 and 0.533 for 12S, as agreed, but shells 14 to 48 print 0.721 in the same column (figure 3 prints 0.731 for all of them), so the printed 0.731 for shell 12 looks wrong for its series, a point for an engineer.",
    "Printed value to confirm. Table VIII, column 'M85049/11 backshell dash number': 0.9914529914529915 then 0.9545454545454546. Page 46 prints 116/117, as agreed; the column holds paired backshell dash numbers, not fractions, but 116/117 breaks the run of pairs (13/14 before it, 21/22 after it) and is the only pair that starts on an even number, so the printed value looks wrong for its series, a point for an engineer.",
    "Model. Figures 2 and 4 head the B column 'Dia' (+.000 -.062), but both figures dimension B as the axial length from the coupling ring front to the gasket shoulder, and .664 cannot be a diameter on shells up to 3.000; the solids use B as that length.",
    "Model. On shell size 10SL, figures 3 and 5 put the key face at P .165 to .175 from the axis, inside the .377 to .397 insert diameter, so 10SL inserts need a keyway the document does not dimension; the 10SL socket receptacles fuse the key to the insert and carry no P check.",
    "Model. Figure 1 View A gives the tooth crest as .005 to .025 without saying whether it is a flat width or a radius; the solids build a flat .015 wide.",
    "Model. Figure 7 gives no length for any contact (pin projection, collar, socket barrel, entry bore depth or overall length), so every contact length is assumed and must come from the contact drawings."
   ]
  },
  {
   "id": "MIL-DTL-83528/4H",
   "slug": "mil-dtl-83528-4h",
   "title": "Gasketing material, conductive, shielding gasket, electronic, EMI/RFI, connector flange mount",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-83528_4H Gasketing material, conductive",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 36,
   "dimensions": 324,
   "dimensions_met": 324,
   "kind": "Detail specification sheet",
   "dated": "13 February 2023",
   "status": "Active, 13 February 2023",
   "newest": "Revision H, 13 February 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 3,
   "by_class": {
    "Virginia": 3
   },
   "stock_examples": [
    "5999-01-513-3148, shielding gasket, electronic, M83528/004D032 (Virginia)",
    "5999-01-513-3358, shielding gasket, electronic, M83528/004D023 (Virginia)",
    "5999-01-619-0718, shielding gasket, electronic, M83528/004D033 (Virginia)"
   ],
   "files": {
    "package": "MIL-DTL-83528_4H package.pdf",
    "scan": "MIL-DTL-83528_4H legacy scan.pdf",
    "clean": "MIL-DTL-83528_4H clean copy.pdf",
    "record": "MIL-DTL-83528_4H validation record.pdf",
    "sheet": "MIL-DTL-83528_4H 3D model.pdf",
    "parts": "MIL-DTL-83528_4H parts list.pdf",
    "inspection": "MIL-DTL-83528_4H inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M83528_004X034-freecad.png",
    "pair": "Models/views/M83528_004X034-pair.png",
    "record": "Models/views/M83528_004X034-record.png",
    "front": "Models/views/M83528_004X034-front.png",
    "top": "Models/views/M83528_004X034-top.png",
    "right": "Models/views/M83528_004X034-right.png",
    "cut": "Models/views/M83528_004X034-cut.png"
   },
   "shown_part": "M83528/004X034",
   "application": "FreeCAD 1.1.4",
   "modeled": "Thirty-six flat square gasket solids, one per Table I dash number M83528/004X001 to X036, each a .032 thick square of side C with the B centre thru hole and four D corner thru holes on an A by A square pattern, all centred on the square.",
   "not_modeled": [
    "The rounded outside corners drawn in Figure 1, whose radius the sheet does not give.",
    "The twelve material types A to M that replace the X in the PIN; they share one geometry, so each solid stands for all twelve PINs of its dash number (432 PINs in all).",
    "The Table I cross section column, a reference value for volume resistivity, and the Table II connector shell cross-reference and Table III supersession data, which carry no geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 7eccf233daa1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "959 of 966 items agreed. All 8 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "250 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 3 tables (684 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "36 solids in STEP AP242. 324 of 324 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H, 13 February 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table I does not define its cross section column; on 28 rows it equals (C - B)/2 times the .032 thickness, but rows 021, 022 and 024 to 029 do not (021 prints .016 cm\u00b2, while (1.500 - 1.250)/2 \u00d7 .032 in gives .026 cm\u00b2), and 021 to 026 each print the value of the row above, so the column should be confirmed before it is used for volume resistivity."
   ]
  },
  {
   "id": "MIL-DTL-8834L",
   "slug": "mil-dtl-8834l",
   "title": "Switches, toggle, positive break, general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-DTL-8834L Switches, toggle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 43,
   "solids": 9,
   "dimensions": 45,
   "dimensions_met": 45,
   "kind": "Detail specification",
   "dated": "4 April 2023",
   "status": "Active, 4 April 2023",
   "newest": "Revision L Supplement 1, 4 April 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 10,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 8,
    "Seawolf": 2
   },
   "stock_examples": [
    "5930-01-497-6155, switch, toggle, MIL-DTL-8834 (Virginia)",
    "5930-01-015-0019, switch, toggle, MIL-DTL-8834 (Los Angeles)",
    "5930-01-031-7149, switch, toggle, MIL-DTL-8834 (Los Angeles, Seawolf)",
    "5930-01-039-3771, switch, toggle, MIL-DTL-8834 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-8834L package.pdf",
    "scan": "MIL-DTL-8834L legacy scan.pdf",
    "clean": "MIL-DTL-8834L clean copy.pdf",
    "record": "MIL-DTL-8834L validation record.pdf",
    "sheet": "MIL-DTL-8834L 3D model.pdf",
    "parts": "MIL-DTL-8834L parts list.pdf",
    "inspection": "MIL-DTL-8834L inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 36",
   "pictures": {
    "iso": "Models/views/MIL-DTL-8834_A.5.2_helical_lock-spring_washer_No._6-freecad.png",
    "pair": "Models/views/MIL-DTL-8834_A.5.2_helical_lock-spring_washer_No._6-pair.png",
    "record": "Models/views/MIL-DTL-8834_A.5.2_helical_lock-spring_washer_No._6-record.png",
    "front": "Models/views/MIL-DTL-8834_A.5.2_helical_lock-spring_washer_No._6-front.png",
    "top": "Models/views/MIL-DTL-8834_A.5.2_helical_lock-spring_washer_No._6-top.png",
    "right": "Models/views/MIL-DTL-8834_A.5.2_helical_lock-spring_washer_No._6-right.png",
    "cut": "Models/views/MIL-DTL-8834_A.5.2_helical_lock-spring_washer_No._6-cut.png"
   },
   "shown_part": "MIL-DTL-8834 A.5.2 helical lock-spring washer No. 6",
   "application": "FreeCAD 1.1.4",
   "modeled": "Nine solids of the Appendix A mounting and terminal hardware: the thin hexagon nut and the internal tooth lockwasher in the .250 and .469 sizes, the locking ring for the .469 bushing, the .138-32 pan head terminal screw, the No. 6 helical lock-spring washer, and the screw with captive internal tooth lockwasher in .138-32 and .164-32.",
   "not_modeled": [
    "The toggle switches themselves: the specification dimensions only their mounting and terminal hardware.",
    "Thread form of the .250-40 and .469-32 UNS-2B nuts and the .138-32 and .164-32 UNC-2A screws.",
    "Screw slots, the optional domed head contour of A.5.3, the rounded pan head edge and the chamfered screw points, which the drawings show without dimensions.",
    "Teeth of the internal tooth lockwashers and the split and helix of the helical lock-spring washer; none is dimensioned.",
    "Bore of the A.5.3 captive lockwasher, the shank it rides on, its free rotation (note 5) and the note 6 limit that the screw is threaded to within .024 of the lockwasher.",
    "Bend radius of the locking ring tab.",
    "Materials, finishes and the MIL hardware substitutes listed for each item."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "43 pages, 2 scanned. SHA-256 645779e361f2.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "12,472 of 12,644 items agreed. All 114 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "134 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "38 pages of searchable text, 16 tables (903 cells), 14 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 45 of 45 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision L Supplement 1, 4 April 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The locking ring edge view draws the .050 \u00b1.005 tab dimension from the ring's back face, so with G at .037 to .043 the bent tab stands only .002 to .018 beyond the front face; MIL-DTL-3950L draws the same ring (.735/.703 by .480/.470, MS25081-C4) with .055/.045 measured beyond the face, and the engineer should confirm which face the .050 is taken from."
   ]
  },
  {
   "id": "MIL-F-16377/66(SH)",
   "slug": "mil-f-16377-66-sh",
   "title": "Fixtures, lighting; fluorescent, general lighting, 45 watts, 120 volts, 60 hertz, watertight, symbols 82, 82.1, 343.1 and 343.2",
   "class": "Virginia",
   "folder": "Virginia/MIL-F-16377_66(SH) Fixtures, lighting",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification sheet",
   "dated": "14 May 1982",
   "status": "Inactive, 14 July 2020",
   "newest": "Notice 2 - Inactivation, 14 July 2020",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 8,
   "by_class": {
    "Virginia": 5,
    "Ohio": 3
   },
   "stock_examples": [
    "6210-01-510-9813, window, lighting fixture, M16377/66 (Virginia)",
    "6210-01-510-9822, window, lighting fixture, M16377/66 (Virginia)",
    "6230-01-511-3271, light, bed, M16377/66-82-MOD (Virginia)",
    "6210-01-511-3280, fixture, lighting, M16377/66-343.1-G-W-MOD (Virginia)"
   ],
   "files": {
    "package": "MIL-F-16377_66(SH) package.pdf",
    "scan": "MIL-F-16377_66(SH) legacy scan.pdf",
    "clean": "MIL-F-16377_66(SH) clean copy.pdf",
    "record": "MIL-F-16377_66(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 bf556ee64c71.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "776 of 783 items agreed. All 7 differences were settled against the page image. A second pass settled 2 from a second printing in the document.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "77 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 6 tables (226 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "The sheet defines four watertight three-lamp fluorescent fixtures and two window assemblies by symbol, standard parts, photometric and inspection requirements, and gives only typical views with a few envelope dimensions, referring dimensions, configuration and mounting to figures 10, 25, 26 and 27 of MIL-F-16377.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Notice 2 - Inactivation, 14 July 2020. ASSIST also holds Amendment 1 (2 August 1996). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-F-24787/7(SH)",
   "slug": "mil-f-24787-7-sh",
   "title": "Fittings, end, types B and BL, gasket seal union, reusable for flexible hose assemblies",
   "class": "Virginia",
   "folder": "Virginia/MIL-F-24787_7(SH) Fittings, end",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 44,
   "dimensions": 264,
   "dimensions_met": 260,
   "kind": "Military specification",
   "dated": "3 September 1993",
   "status": "Canceled, 17 March 2015",
   "newest": "Notice 2 - Cancellation, 17 March 2015",
   "superseding": "MIL-F-24787/3",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "4730-01-503-1731, elbow, hose, MIL-F-24787/7 (Virginia)"
   ],
   "files": {
    "package": "MIL-F-24787_7(SH) package.pdf",
    "scan": "MIL-F-24787_7(SH) legacy scan.pdf",
    "clean": "MIL-F-24787_7(SH) clean copy.pdf",
    "record": "MIL-F-24787_7(SH) validation record.pdf",
    "sheet": "MIL-F-24787_7(SH) 3D model.pdf",
    "parts": "MIL-F-24787_7(SH) parts list.pdf",
    "inspection": "MIL-F-24787_7(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 9",
   "pictures": {
    "iso": "Models/views/MIL-F-24787_7_type_BL_-32_x_1-1_2_solid_socket_group_I_and_II-freecad.png",
    "pair": "Models/views/MIL-F-24787_7_type_BL_-32_x_1-1_2_solid_socket_group_I_and_II-pair.png",
    "record": "Models/views/MIL-F-24787_7_type_BL_-32_x_1-1_2_solid_socket_group_I_and_II-record.png",
    "front": "Models/views/MIL-F-24787_7_type_BL_-32_x_1-1_2_solid_socket_group_I_and_II-front.png",
    "top": "Models/views/MIL-F-24787_7_type_BL_-32_x_1-1_2_solid_socket_group_I_and_II-top.png",
    "right": "Models/views/MIL-F-24787_7_type_BL_-32_x_1-1_2_solid_socket_group_I_and_II-right.png",
    "cut": "Models/views/MIL-F-24787_7_type_BL_-32_x_1-1_2_solid_socket_group_I_and_II-cut.png"
   },
   "shown_part": "MIL-F-24787/7 type BL -32 x 1-1/2 solid socket group I and II",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of every type B straight and type BL 90-degree elbow gasket seal union fitting in Tables VI to IX, one per hose dash number and tube size, each with seal nose, collar hex, elbow tube where applicable, and socket.",
   "not_modeled": [
    "The union nut and its internal thread T, which the figure shows but does not dimension apart from the thread size.",
    "The hose cavity, nipple serrations and socket internal form, which the document leaves to the hose group.",
    "The 3-degree chamfer, the 1/32 dimension and dimension I at the seal nose, which the tables do not give.",
    "The flats and bands of the ring and band socket and its segmented construction.",
    "Materials, which the table notes assign to QQ-N-281, QQ-N-286, QQ-N-288, MIL-T-1368, MIL-T-16420 and AMS 6381."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, all scanned. SHA-256 78a812d4d3f3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,308 of 2,609 items agreed. All 33 differences were settled against the page image. A second pass settled 2 from a second printing in the document.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "215 checks on size series and limits. 7 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 11 tables (522 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "44 solids in STEP AP242. 260 of 264 stated dimensions measure within limits; 4 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Notice 2 - Cancellation, 17 March 2015.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table VI, column A max: the row for hose -24 with tube size 1-1/4 prints 5.25, below the 5.50 printed in the row above for hose -20 with the same tube size. The ten rows above rise by 0.25 each from 3.25 to 5.50 and the next row prints 6.00, so 5.25 breaks the run and repeats the value of the hose -20, tube size 1 row; 5.75 would continue it.",
    "Model. Table VII, the one row for the group III solid socket in hose size -16, prints C 1.25 nom beside thread 2-1/8-12 UN and F 1.375. A 1.25 hex is smaller than the F diameter and the thread of its own row, and Tables VI, VIII and IX print C 2.25 in every row with the 2-1/8-12 UN thread, so an engineer must confirm the C value for this row; no other revision is available to compare.",
    "Model. Figure 1 points T at the body between the union face and the hex and C at the hex behind it, and the elbow section draws the two as one piece. The tables give T as a class 2B (internal) thread, yet C is only about 1/8 inch over the thread size (a 2.25 hex with a 2-1/8-12 thread), so an engineer must decide whether T is an internal thread on a separate union nut, which the sheet does not dimension, or an external thread on the hexed piece."
   ]
  },
  {
   "id": "MIL-G-24716A(SH)",
   "slug": "mil-g-24716a-sh",
   "title": "Gaskets, metallic-flexible graphite, spiral wound",
   "class": "Virginia",
   "folder": "Virginia/MIL-G-24716A(SH) Gaskets, metallic-flexible graphite",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 26,
   "solids": 94,
   "dimensions": 658,
   "dimensions_met": 658,
   "kind": "Military specification",
   "dated": "5 April 1993",
   "status": "Active, 19 February 2026",
   "newest": "Revision A Notice 1 - Validation, 19 February 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 3,
   "by_class": {
    "Virginia": 2,
    "Los Angeles": 1
   },
   "stock_examples": [
    "5330-01-508-7819, gasket, spiral wound, M24716TY2CLB1.00NPS150PSINICRFE (Virginia)",
    "5330-01-508-7827, gasket, spiral wound, M24716TY2CLB0.50NPS150PSINICRFE (Virginia)",
    "5330-01-504-0591, gasket, spiral wound, M24716TY2CLA14.000NPS300PSI (Los Angeles)"
   ],
   "files": {
    "package": "MIL-G-24716A(SH) package.pdf",
    "scan": "MIL-G-24716A(SH) legacy scan.pdf",
    "clean": "MIL-G-24716A(SH) clean copy.pdf",
    "record": "MIL-G-24716A(SH) validation record.pdf",
    "sheet": "MIL-G-24716A(SH) 3D model.pdf",
    "parts": "MIL-G-24716A(SH) parts list.pdf",
    "inspection": "MIL-G-24716A(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 11",
   "pictures": {
    "iso": "Models/views/M_24716_TY_2_CL_A_18_NPS_600_PSI_CRES-freecad.png",
    "pair": "Models/views/M_24716_TY_2_CL_A_18_NPS_600_PSI_CRES-pair.png",
    "record": "Models/views/M_24716_TY_2_CL_A_18_NPS_600_PSI_CRES-record.png",
    "front": "Models/views/M_24716_TY_2_CL_A_18_NPS_600_PSI_CRES-front.png",
    "top": "Models/views/M_24716_TY_2_CL_A_18_NPS_600_PSI_CRES-top.png",
    "right": "Models/views/M_24716_TY_2_CL_A_18_NPS_600_PSI_CRES-right.png",
    "cut": "Models/views/M_24716_TY_2_CL_A_18_NPS_600_PSI_CRES-cut.png"
   },
   "shown_part": "M 24716 TY 2 CL A 18 NPS 600 PSI CRES",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid per type II gasket size and pressure series in tables I to V (94 solids): the spiral wound refill as an annulus 0.175 thick inside a solid metal outer ring 0.124 thick, centred on the same mid-plane, axis along X.",
   "not_modeled": [
    "Part numbers differ by class (A, B, C) and outer ring finish (CRPL, CRES, UNC, REF, blank), which change material only; each size and series is modeled once and named as class A with a CRES ring, and the REF option (refill without ring) is the refill portion of the same solid.",
    "The individual metal and flexible graphite plies, ply counts, spot welds and the spot weld defect sizes of figure 2 and 4.3.1 are not modeled.",
    "The V-shaped groove or other retaining feature on the ring inside periphery is not modeled; the document gives no dimensions for it.",
    "Type I gaskets are not modeled; their dimensions are set by the contracting activity.",
    "Test loads and the 0.130 compressed thickness are performance requirements and are not modeled.",
    "Size and series combinations marked 'Use Series 600', 'Use Series 1500' or left blank in the tables have no solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "26 pages, all scanned. SHA-256 fe40da5fcba9.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "6,955 of 7,066 items agreed. All 113 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "857 checks on size series and limits. 33 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "21 pages of searchable text, 15 tables (949 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "94 solids in STEP AP242. 658 of 658 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 19 February 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, test load column: the 10 inch row prints 151,001 pounds and the 12 inch row prints 151,000 pounds. Every other load in the table is a round hundred and the loads never fall as the size rises, so the final 1 in 151,001 looks like a typing error for 151,000."
   ]
  },
  {
   "id": "MIL-P-24691",
   "slug": "mil-p-24691",
   "title": "Pipe and tube, carbon, alloy and stainless steel, seamless and welded, general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-P-24691 Pipe and tube, carbon",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "23 September 1987",
   "status": "Active, 18 February 2026",
   "newest": "Notice 1 - Validation, 18 February 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-P-24691 package.pdf",
    "scan": "MIL-P-24691 legacy scan.pdf",
    "clean": "MIL-P-24691 clean copy.pdf",
    "record": "MIL-P-24691 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, all scanned. SHA-256 31a6672d947a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,893 of 3,900 items agreed. All 6 differences were settled against the page image. A second pass settled 1 from a closer look at the page.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 4 tables (83 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-P-24691 is a general specification for seamless and welded carbon, alloy and stainless steel pipe and tube that defines material, tests, straightness tolerances and packaging, and defers dimensions to ANSI B36.10 and detail specifications MIL-P-24691/1 to /3.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Notice 1 - Validation, 18 February 2026. ASSIST also holds Amendment 2 (4 February 1991). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-P-24691/3",
   "slug": "mil-p-24691-3",
   "title": "Pipe and tube, corrosion-resistant, stainless steel, seamless or welded",
   "class": "Virginia",
   "folder": "Virginia/MIL-P-24691_3 Pipe and tube, corrosion-resistant",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "23 September 1987",
   "status": "Active, 18 April 2024",
   "newest": "Notice 1 - Validation, 18 April 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "4710-01-517-4891, pipe, metallic, MIL-P-24691/3 (Virginia)"
   ],
   "files": {
    "package": "MIL-P-24691_3 package.pdf",
    "scan": "MIL-P-24691_3 legacy scan.pdf",
    "clean": "MIL-P-24691_3 clean copy.pdf",
    "record": "MIL-P-24691_3 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, all scanned. SHA-256 a7b64ea23eb6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,174 of 1,350 items agreed. All 23 differences were settled against the page image. A second pass settled 1 from a closer look at the page.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 1 table (52 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "The sheet defines stainless steel pipe and tube by type, grade, size and wall schedule in a part number code and sends outside diameters and wall thicknesses to ANSI B36.10, so it gives no dimensions to model.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Notice 1 - Validation, 18 April 2024. ASSIST also holds Amendment 1 (4 February 1991). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-19207/24N w/AMENDMENT 1",
   "slug": "mil-prf-19207-24n-w-amendment-1",
   "title": "Fuseholders, extractor post type, blown fuse indicating, non-EMI/RFI shielded and EMI/RFI shielded, type FHL35W and type FHL35WS",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-19207_24N w_AMENDMENT 1 Fuseholders, extractor post type",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 44,
   "dimensions": 484,
   "dimensions_met": 484,
   "kind": "Performance specification sheet",
   "dated": "12 August 2024",
   "status": "Active, 12 August 2024",
   "newest": "Revision N Amendment 1 (amendment incorporated), 12 August 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 2
   },
   "stock_examples": [
    "5920-01-579-8917, fuseholder, extractor post, MIL-PRF-19207/24 (Virginia)",
    "5920-01-579-8926, fuseholder, extractor post, MIL-PRF-19207/24 (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-19207_24N w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-19207_24N w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-19207_24N w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-19207_24N w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-19207_24N w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-19207_24N w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-19207_24N w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/FHL35WS-01-freecad.png",
    "pair": "Models/views/FHL35WS-01-pair.png",
    "record": "Models/views/FHL35WS-01-record.png",
    "front": "Models/views/FHL35WS-01-front.png",
    "top": "Models/views/FHL35WS-01-top.png",
    "right": "Models/views/FHL35WS-01-right.png",
    "cut": "Models/views/FHL35WS-01-cut.png"
   },
   "shown_part": "FHL35WS-01",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the Type FHL35W (figure 1) and Type FHL35WS (figure 2) extractor post fuseholders as supplied, one per table I part number with and without the C clear-cap designator: cap of diameter B, hex mounting nut A across the flats run down onto the K gasket, body flange reaching .830 above and .690 below the centerline with the terminal screw hole at C, body, and the .190-32 rear stud.",
   "not_modeled": [
    "The .164-32 terminal screw .25 long with its lock washer and flat washer, and the flat washer, lock washer and nut on the .190-32 stud, which the figures call out without dimensions; the solids carry the screw's hole and the bare stud.",
    "The panel mounting holes (H and J of figure 1; K, L and M of figure 2), which are cut in the panel, and the flat on the mounting bushing that keys into them, which is not dimensioned.",
    "The .125 max panel and the 1.63 min diameter conductive panel surface of the FHL35WS notes, which are not part of the fuseholder.",
    "The fuse cavity for the .406 diameter by 1.500 long ferrule fuse, the fuse contacts, the lamp and the series resistor of table I; the solids are solid envelopes.",
    "The taper of the body behind the flange, which both figures draw without dimensions.",
    "The knurl, the FUSE and TURN marking and slot on the cap, the indicator holes of the shielded cap, the O-ring inside the cap, the tether and elastomer shielding ring of the FHL35WS, the 1.125-16 modified square mounting thread form, and cap colour."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 5735ae92d3cc.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "863 of 886 items agreed. All 23 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "45 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 4 tables (296 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "44 solids in STEP AP242. 484 of 484 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision N Amendment 1 (amendment incorporated), 12 August 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 2 draws F to the front face of the panel and G from its back face, yet J 3.12 REF equals F + G + H (1.275 + 1.301 + .549 = 3.125) and leaves no length for a panel up to .125 thick; an engineer must say at what panel thickness F and G apply (the solids seat the nut on the mounting plane with no panel)."
   ]
  },
  {
   "id": "MIL-PRF-24236/24F",
   "slug": "mil-prf-24236-24f",
   "title": "Switches, thermostatic, (bimetallic), subminiature, type I, hermetically sealed, single pole, double throw (spdt), 2 amperes and low level",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-24236_24F Switches, thermostatic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 7,
   "dimensions": 104,
   "dimensions_met": 104,
   "kind": "Performance specification sheet",
   "dated": "6 June 2022",
   "status": "Active, 6 June 2022",
   "newest": "Revision F, 6 June 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5930-01-555-7889, switch, thermostatic, M24236/24-DKLJM (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-24236_24F package.pdf",
    "scan": "MIL-PRF-24236_24F legacy scan.pdf",
    "clean": "MIL-PRF-24236_24F clean copy.pdf",
    "record": "MIL-PRF-24236_24F validation record.pdf",
    "sheet": "MIL-PRF-24236_24F 3D model.pdf",
    "parts": "MIL-PRF-24236_24F parts list.pdf",
    "inspection": "MIL-PRF-24236_24F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M24236_24-D-freecad.png",
    "pair": "Models/views/M24236_24-D-pair.png",
    "record": "Models/views/M24236_24-D-record.png",
    "front": "Models/views/M24236_24-D-front.png",
    "top": "Models/views/M24236_24-D-top.png",
    "right": "Models/views/M24236_24-D-right.png",
    "cut": "Models/views/M24236_24-D-cut.png"
   },
   "shown_part": "M24236/24-D",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the seven Figure 1 configurations, one per Table I code (A to G): a round case with three straight solder-lug terminals (A, A1, A2, A3) or three right angle terminals (B, B1, B2), on a slotted diamond flange (A1, B1), a two-hole diamond flange (A2, B2) or a .138-32 stud (A3).",
   "not_modeled": [
    "The switch inside the case (bimetallic disc, contacts, glass seals); the case is solid.",
    "The temperature settings and low level letter of the PIN (tables II, III and VI), the electrical ratings, endurance, torque and the .025 pound weight limit, which do not change the outline; each solid stands for every PIN that starts with its Table I code.",
    "Configuration B3, which note 5 names but Figure 1 does not draw and Table I gives no code.",
    "The rounded closed-end corner of the case, the rim of the A2 case beside the flange, the cross pieces drawn at the terminal roots and the rounded lug ends, none of which Figure 1 dimensions.",
    "Thread form: the A3 stud is a plain cylinder at the .138 major diameter."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 0 scanned. SHA-256 fc0c663a2dae.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "711 of 729 items agreed. All 22 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "17 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 6 tables (147 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "7 solids in STEP AP242. 104 of 104 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F, 6 June 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The .265 max hole offset of configuration B cites note 5, which is about basic switches; if it means note 3 (the switch envelope), it cannot be reached, since at .265 and .164 the hole centres of terminals 1 and 3 lie .312 from the axis and a .039 hole reaches .331, outside the .320 radius of the .640 max case.",
    "Model. Configurations A and B are labeled \"see note 6\", but Figure 1 has only notes 1 to 5.",
    "Model. Note 5 names configuration B3, which has no drawing in Figure 1 and no Table I code.",
    "Model. Figure 1 gives no position across the switch for terminal 2, nor for the hole of right angle terminal 2, so both are assumed."
   ]
  },
  {
   "id": "MIL-PRF-24699B(SH)",
   "slug": "mil-prf-24699b-sh",
   "title": "Acoustical transmission loss barrier materials",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-24699B(SH) Acoustical transmission loss barrier materials",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "12 March 2024",
   "status": "Active, 12 March 2024",
   "newest": "Revision B, 12 March 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "9390-01-652-6832, sheet, nonmetallic, protective, MIL-A-24699 TY I (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-24699B(SH) package.pdf",
    "scan": "MIL-PRF-24699B(SH) legacy scan.pdf",
    "clean": "MIL-PRF-24699B(SH) clean copy.pdf",
    "record": "MIL-PRF-24699B(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, 0 scanned. SHA-256 6c742628652b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,948 of 4,963 items agreed. All 22 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "112 checks on size series and limits. 7 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 20 tables (361 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-24699B(SH) is a performance specification for acoustical transmission loss barrier materials that sets types, classes, surface density, breaking, tear, rivet and grommet strength, flame, smoke and sound transmission loss requirements and their tests, and gives only roll widths of 26, 38 or 48 inches (3.3.1), panel sizes of 3 by 4 or 3 by 8 feet (3.3.3) and a tolerance of plus or minus 1/4 inch (3.3.4), with no figure, no thickness and no dimensions by size or part number.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B, 12 March 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-28876F w/AMENDMENT 2",
   "slug": "mil-prf-28876f-w-amendment-2",
   "title": "Connectors, fiber optic, circular, plug and receptacle style, multiple removable termini, general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-28876F w_AMENDMENT 2 Connectors, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 71,
   "solids": 108,
   "dimensions": 3008,
   "dimensions_met": 3008,
   "kind": "Performance specification",
   "dated": "11 September 2023",
   "status": "Active, 4 March 2026",
   "newest": "Revision F Notice 1 - Validation, 4 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 3,
   "by_class": {
    "Virginia": 2,
    "Los Angeles": 1
   },
   "stock_examples": [
    "6060-01-510-5574, connector, receptacle, fiber optic, MIL-PRF-28876 (Virginia)",
    "6060-01-510-7210, connector, plug, fiber optic, MIL-PRF-28876 (Virginia)",
    "6060-01-484-9138, connector, receptacle, fiber optic, MIL-PRF-28876 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-28876F w_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-28876F w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-28876F w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-28876F w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-28876F w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-28876F w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-28876F w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure A-1, page 42",
   "pictures": {
    "iso": "Models/views/MIL-PRF-28876_shell_back_end_shell_size_23_F_-freecad.png",
    "pair": "Models/views/MIL-PRF-28876_shell_back_end_shell_size_23_F_-pair.png",
    "record": "Models/views/MIL-PRF-28876_shell_back_end_shell_size_23_F_-record.png",
    "front": "Models/views/MIL-PRF-28876_shell_back_end_shell_size_23_F_-front.png",
    "top": "Models/views/MIL-PRF-28876_shell_back_end_shell_size_23_F_-top.png",
    "right": "Models/views/MIL-PRF-28876_shell_back_end_shell_size_23_F_-right.png",
    "cut": "Models/views/MIL-PRF-28876_shell_back_end_shell_size_23_F_-cut.png"
   },
   "shown_part": "MIL-PRF-28876 shell back end, shell size 23 (F)",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the MIL-PRF-28876 connector interfaces in Appendix A for shell sizes 11 (A), 13 (B), 15 (C) and 23 (F): the receptacle mating end (figure A-2) and the plug mating end with its coupling ring (figure A-1), each with a pin insert and with a socket insert in each key and keyway arrangement 1 to 6 (figure A-3), the connector shell back end (figure A-6), the backshell attachment nut interface (figure A-7) and the insert retention nut (figure A-8).",
   "not_modeled": [
    "Termini and their cavities: the figure 1 cavity profile and the Appendix B insert arrangements, termini positions, alignment pins (.059/.063, .075 out) and alignment holes (.065/.069, .09 deep); the inserts are solid cylinders.",
    "Outer configuration of plugs and receptacles (flanges, jam nuts, coupling ring outside, safety wire holes), which the specification sheets MIL-PRF-28876/1 to /14 define, and the shell length between the mating end and the back end.",
    "Plug: the optional gasket of Detail A, the thread relief at the coupling ring front and the coupling ring retention.",
    "Receptacle: the bore entry chamfer, the thread relief at the front of the T thread and the undercut at the bore floor that the figure draws but does not dimension.",
    "Insert rear position (.272 \u00b1.020 from the rear of the shell), since the back end solid carries no insert.",
    "Thread form: pitch, lead, double start, pitch and minor diameters and classes of figures A-4 and A-5 and of the UNEF V and M threads.",
    "Undimensioned chamfers (back end rear chamfer, nut entry chamfers, the chamfer from the P bore to the spline), the insert retention nut outside groove and rear corner radius, and the concentricity and position frames other than the key, keyway, slot and spline positions.",
    "Figures 2 and 3 (bending moment and impact test set-ups)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "71 pages, 6 scanned. SHA-256 9347c7ab6fc8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "18,407 of 18,507 items agreed. All 59 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "555 checks on size series and limits. 27 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "63 pages of searchable text, 47 tables (1,598 cells), 23 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "108 solids in STEP AP242. 3,008 of 3,008 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 1 - Validation, 4 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure A-1 prints the key length as .110 \u00b1.010 (5 places, all keys) but draws each key reaching back to the .546 MAX pin insert line, about four times that length; the solids carry .110 keys, and an engineer should confirm the value.",
    "Model. Figure A-2 asks only .600 min for the full keyway, but with the plug barrel seated on the .854 floor the plug key fronts (.125 behind the barrel front) reach .719 to .739 into the receptacle, so the keyways must run deeper; the solids cut them to the floor.",
    "Model. Figure A-5 heads the external thread limits with the internal table's labels, so the largest pair (0.7405 to 0.7485 for shell size 11) stands under Minor diameter and the smallest under Major diameter; the solids take the largest pair as the major diameter.",
    "Model. Figure A-8 prints N dia max as 1.257 (29.2156) for shell size 13 and 1.763 (43.78) for shell size 23, but the millimetre values convert to 1.150 and 1.724 inch (figure A-7 gives 1.150 and 1.695); the solids use the inch values as printed.",
    "Model. Figures A-6 and A-7 draw the back end slots and the spline keys only in a partial end view; the solids repeat them evenly at the basic angle all around (18 to 30), which an engineer should confirm."
   ]
  },
  {
   "id": "MIL-PRF-28876/10G",
   "slug": "mil-prf-28876-10g",
   "title": "Connectors, fiber optic, circular, plug style, multiple removable termini, dust cover, screw threads, environment resisting",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-28876_10G Connectors, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 4,
   "dimensions": 56,
   "dimensions_met": 56,
   "kind": "Performance specification sheet",
   "dated": "1 March 2021",
   "status": "Active, 4 March 2026",
   "newest": "Revision G Notice 1 - Validation, 4 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 3,
   "by_class": {
    "Virginia": 2,
    "Los Angeles": 1
   },
   "stock_examples": [
    "6060-01-514-9577, cover, fiber optic connector, M28876/10CC (Virginia)",
    "6060-01-516-4436, cover, fiber optic connector, M28876/10BC (Virginia)",
    "6060-01-562-2004, cover, fiber optic connector, M28876/10-BEW (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-28876_10G package.pdf",
    "scan": "MIL-PRF-28876_10G legacy scan.pdf",
    "clean": "MIL-PRF-28876_10G clean copy.pdf",
    "record": "MIL-PRF-28876_10G validation record.pdf",
    "sheet": "MIL-PRF-28876_10G 3D model.pdf",
    "parts": "MIL-PRF-28876_10G parts list.pdf",
    "inspection": "MIL-PRF-28876_10G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28876_10C_-freecad.png",
    "pair": "Models/views/M28876_10C_-pair.png",
    "record": "Models/views/M28876_10C_-record.png",
    "front": "Models/views/M28876_10C_-front.png",
    "top": "Models/views/M28876_10C_-top.png",
    "right": "Models/views/M28876_10C_-right.png",
    "cut": "Models/views/M28876_10C_-cut.png"
   },
   "shown_part": "M28876/10C**",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the MIL-PRF-28876/10 plug dust cover body with its gasket, one per shell size Table I lists (4 solids, M28876/10A** to M28876/10F**): a sleeve at the T thread major diameter from the open end to the head shoulder at .630, a head at the A maximum diameter to the back of the cover at 1.000, and a blind bore at the B diameter ending at the gasket face at .670.",
   "not_modeled": [
    "The attachment device (ring shown, shape optional): the C diameter, the D maximum height, the .115 \u00b1.025 ring width and the .135 \u00b1.015 diameter hole of the alternate end.",
    "The lanyard (9.0 \u00b10.5 long, design optional, chain or rope by Table I), the fastener on the back face and its hole through the end wall, and the raised boss around the fastener that Figure 1 draws beyond the back face.",
    "The thread form of the T thread (pitch, lead, double start and the class 2A limits), the thread lead-in at the open end and the thread runout.",
    "The gasket as a separate part and the recess it seats in, the shoulder chamfer and the back-corner round of the head, the knurl, the 2.5 ounce maximum weight, and the plating or finish of the class designators.",
    "The 40 PINs of Table I that differ only in lanyard attachment or class designator (the * positions of each part number) share the solid of their shell size."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 1aacf10acf62.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "285 of 337 items agreed. All 11 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "31 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 3 tables (106 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 56 of 56 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Notice 1 - Validation, 4 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 draws a raised boss around the fastener that stands beyond the back face the 1.000 max line reaches, and gives no height for it, so the sheet does not settle whether the boss and fastener head must also lie within 1.000; the solids end at a flat back face at 1.000."
   ]
  },
  {
   "id": "MIL-PRF-28876/15F",
   "slug": "mil-prf-28876-15f",
   "title": "Connectors, fiber optic, circular, receptacle style, multiple removable termini, dust cover, screw threads, environment resisting",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-28876_15F Connectors, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 20,
   "dimensions": 136,
   "dimensions_met": 136,
   "kind": "Performance specification sheet",
   "dated": "1 March 2021",
   "status": "Active, 4 March 2026",
   "newest": "Revision F Notice 1 - Validation, 4 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 4,
   "by_class": {
    "Virginia": 2,
    "Los Angeles": 2
   },
   "stock_examples": [
    "6060-01-516-4050, cover, fiber optic connector, M28876/15BC (Virginia)",
    "6060-01-584-1603, cover, fiber optic connector, M28876/15CD (Virginia)",
    "6060-01-578-9461, cover, fiber optic connector, M28876/15CB (Los Angeles)",
    "6060-01-595-5608, cover, fiber optic connector, M28876/15FC (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-28876_15F package.pdf",
    "scan": "MIL-PRF-28876_15F legacy scan.pdf",
    "clean": "MIL-PRF-28876_15F clean copy.pdf",
    "record": "MIL-PRF-28876_15F validation record.pdf",
    "sheet": "MIL-PRF-28876_15F 3D model.pdf",
    "parts": "MIL-PRF-28876_15F parts list.pdf",
    "inspection": "MIL-PRF-28876_15F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28876_15CD-freecad.png",
    "pair": "Models/views/M28876_15CD-pair.png",
    "record": "Models/views/M28876_15CD-record.png",
    "front": "Models/views/M28876_15CD-front.png",
    "top": "Models/views/M28876_15CD-top.png",
    "right": "Models/views/M28876_15CD-right.png",
    "cut": "Models/views/M28876_15CD-cut.png"
   },
   "shown_part": "M28876/15CD",
   "application": "FreeCAD 1.1.4",
   "modeled": "20 solids, one per shell size 11, 13, 15 and 23 and lanyard attachment, each standing for both classes: the cover with its U thread bore and fused gasket (attachment E); with the fastener, lanyard and end tab (attachments A and C); or with the fastener, lanyard and the ring on its tab (attachments B and D).",
   "not_modeled": [
    "The thread form of the U coupling thread (0.1 pitch, 0.2 lead, double start, class 2B).",
    "The gasket as a separate body: it is fused into the cover, so only its face at the .593 depth is a surface of the solid, and its captive retention is not shown.",
    "The knurl, the reduced outside diameter and step drawn at the open end, the raised boss under the fastener and the rounded corners of the cover, none of which the sheet dimensions.",
    "The chain links or rope lay, the slotted pointed tail of the end tab, the bend in the ring tab drawn in the edge view, and the running clearance that lets the lanyard rotate on the fastener.",
    "Material, finish and the 2.5 ounce maximum weight, which depend on materials the sheet does not give for the fastener, lanyard and attachment device."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 21aaab90e695.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "292 of 314 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "29 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 3 tables (98 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "20 solids in STEP AP242. 136 of 136 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 1 - Validation, 4 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The continued table heads C as 'C dia max', but Figure 1 dimensions C in the edge view as the overall height of the ring and its tab, drawn bent at an angle the sheet does not give; the solids read C as that height with the tab flat, and an engineer must confirm what C measures.",
    "Model. The PIN example on page 3 prints 'M228876/15AB' with an extra 2 against the 'M 28876 /15' breakdown above it; the solids are named M28876/15 and an engineer must confirm the prefix."
   ]
  },
  {
   "id": "MIL-PRF-28876/1F",
   "slug": "mil-prf-28876-1f",
   "title": "Connectors, fiber optic, circular, receptacle style, multiple removable termini, screw threads, wall mounting, without backshell, environment resisting",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-28876_1F Connectors, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 8,
   "dimensions": 160,
   "dimensions_met": 160,
   "kind": "Performance specification sheet",
   "dated": "1 March 2021",
   "status": "Active, 9 March 2026",
   "newest": "Revision F Notice 1 - Validation, 9 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 11,
   "by_class": {
    "Virginia": 6,
    "Los Angeles": 4,
    "Seawolf": 2
   },
   "stock_examples": [
    "6060-01-497-7428, connector, receptacle, fiber optic, M28876/1C1S2 (Los Angeles, Virginia)",
    "6060-01-510-5566, connector, receptacle, fiber optic, M28876/1F1S2 (Virginia)",
    "6060-01-510-5573, connector, receptacle, fiber optic, M28876/1F1S3 (Virginia)",
    "6060-01-510-5574, connector, receptacle, fiber optic, M28876/1F1S4 (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-28876_1F package.pdf",
    "scan": "MIL-PRF-28876_1F legacy scan.pdf",
    "clean": "MIL-PRF-28876_1F clean copy.pdf",
    "record": "MIL-PRF-28876_1F validation record.pdf",
    "sheet": "MIL-PRF-28876_1F 3D model.pdf",
    "parts": "MIL-PRF-28876_1F parts list.pdf",
    "inspection": "MIL-PRF-28876_1F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28876_1C_W0.115-freecad.png",
    "pair": "Models/views/M28876_1C_W0.115-pair.png",
    "record": "Models/views/M28876_1C_W0.115-record.png",
    "front": "Models/views/M28876_1C_W0.115-front.png",
    "top": "Models/views/M28876_1C_W0.115-top.png",
    "right": "Models/views/M28876_1C_W0.115-right.png",
    "cut": "Models/views/M28876_1C_W0.115-cut.png"
   },
   "shown_part": "M28876/1C***** W0.115",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-PRF-28876/1 wall mounting receptacle without backshell, fully assembled, for shell sizes 11, 13, 15, 23 (A, B, C, F) in both flange options the Figure 1 table gives for each (8 solids): the receptacle shell at Z max over the 1.990 maximum length and a square flange X wide, its mounting face 0.888 from the front face, with four W dia holes on the Y basic square.",
   "not_modeled": [
    "The coupling thread form, the bore, the master polarizing keyway and keyway positions 1 to 6 of figures A-2, A-3, A-5 and A-6 of MIL-PRF-28876; the front face is closed.",
    "The insert arrangements of appendix B of MIL-PRF-28876 (figures B-1 to B-6), the style P and S termini of MIL-PRF-29504/14 and /15, and the 0.094 maximum fiber optic cable path to each terminus; the interior is solid.",
    "The thread relief groove, the neck and the insert retention nut outlines Figure 1 draws behind the front thread, including N DIA (note 7) and the nut internal configuration of figure A-8 of MIL-PRF-28876 (note 5).",
    "The chamfered flange corners Figure 1 draws without a size; the solids have sharp corners.",
    "The panel itself: DD dia (the center mounting hole) and the .188 maximum panel thickness are limits on the panel, recorded as parameters and checked as clearances on the solid.",
    "The identification marking (note 4), protective caps, the weight limits, and the finish of Table III.",
    "The 288 PINs of Table I that differ only in insert arrangement number, terminus/insert style, key position, backshell designator or class designator (the * positions of each part number) share the solids of their shell size."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 8c62efde4b6f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "563 of 577 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "17 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 6 tables (112 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "8 solids in STEP AP242. 160 of 160 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 1 - Validation, 9 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. This sheet gives no N DIA (note 7 refers it to appendix A of MIL-PRF-28876), no flange thickness and no lengths for the neck or the insert retention nut, so the solids carry Z max behind the flange and a 0.125 flange as stand-ins; Figure 1 draws the nut larger than Z, so an engineer must take N and the flange thickness from MIL-PRF-28876 before the solids are used for more than a front-of-panel space claim.",
    "Model. Table II backshell designator N supplies the receptacle without the insert retention nut, and the sheet gives no overall length for that configuration, so N receptacles share the 1.990 max fully assembled envelope.",
    "Model. The Figure 1 table gives two flange options for every shell size (W 0.130 with the larger X, W 0.115 with the smaller X), and the PIN of Table I does not select one, so each shell size has a solid for each and an engineer must settle which flange a given PIN receives."
   ]
  },
  {
   "id": "MIL-PRF-28876/27E",
   "slug": "mil-prf-28876-27e",
   "title": "Connectors, fiber optic, circular, plug and receptacle style,multiple termini, screw threads, straight backshell, environment resisting",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-28876_27E Connectors, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 18,
   "dimensions": 108,
   "dimensions_met": 108,
   "kind": "Performance specification sheet",
   "dated": "1 March 2021",
   "status": "Active, 4 March 2026",
   "newest": "Revision E Notice 1 - Validation, 4 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "6060-01-514-9652, connector, receptacle, fiber optic, M28876/27C2 (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-28876_27E package.pdf",
    "scan": "MIL-PRF-28876_27E legacy scan.pdf",
    "clean": "MIL-PRF-28876_27E clean copy.pdf",
    "record": "MIL-PRF-28876_27E validation record.pdf",
    "sheet": "MIL-PRF-28876_27E 3D model.pdf",
    "parts": "MIL-PRF-28876_27E parts list.pdf",
    "inspection": "MIL-PRF-28876_27E inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28876_27B1L-freecad.png",
    "pair": "Models/views/M28876_27B1L-pair.png",
    "record": "Models/views/M28876_27B1L-record.png",
    "front": "Models/views/M28876_27B1L-front.png",
    "top": "Models/views/M28876_27B1L-top.png",
    "right": "Models/views/M28876_27B1L-right.png",
    "cut": "Models/views/M28876_27B1L-cut.png"
   },
   "shown_part": "M28876/27B1L",
   "application": "FreeCAD 1.1.4",
   "modeled": "18 envelope solids, one per shell size and backshell designator that both Figure 1 and Table I define, each standing for class blank and class T: a cylinder at B dia max over the overall length A max with a straight cable passage at the largest cable diameter of the designator's range.",
   "not_modeled": [
    "The internal configuration and the coupling interface, including the coupling nut thread, which note 4 sends to figure A-7 of MIL-PRF-28876.",
    "The separate coupling nut, body and removable sheath, and the steps, tapers, wrench flats, knurling and marking drawn in Figure 1, none of which the sheet dimensions.",
    "The cable seal and its grip on the smallest cable of each range.",
    "M28876/27C4L and M28876/27C4, which Table I lists without an A or B in Figure 1, and shell size 23 backshell designator 3, which Figure 1 dimensions without a Table I cable range.",
    "Classes blank and T, which set the aluminum finish (Table II) and do not change the shape.",
    "The 6.4 ounce maximum weight, which a solid filled to its outside envelope does not represent."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 2c3bd882cffc.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "391 of 400 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "16 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 3 tables (94 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "18 solids in STEP AP242. 108 of 108 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 1 - Validation, 4 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table I lists backshell designators 4L and 4 for shell size 15 (cable 0.305 to 0.346), but the Figure 1 table gives A and B for shell size 15 only for 1L, 2L, 3L and 1, 2, 3, so M28876/27C4L and M28876/27C4 have no overall length or diameter and are not modeled.",
    "Model. The Figure 1 table gives A 6.500 max and B 2.250 dia max for shell size 23 backshell designators 1, 2 and 3, but Table I lists only designators 1 and 2 for shell size 23, so designator 3 has no cable range or PIN and is not modeled.",
    "Model. Page 3 sends the fiber optic cable diameter to table II, which lists the class designators, and the Table I class column refers to a table III the sheet does not contain; the solids take the cable ranges from Table I and the classes from Table II."
   ]
  },
  {
   "id": "MIL-PRF-28876/29F w/AMENDMENT 2",
   "slug": "mil-prf-28876-29f-w-amendment-2",
   "title": "Connectors, fiber optic, circular, plug and receptacle style, multiple removable termini, screw threads, 90-DEGREE backshell, environment resisting",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-28876_29F w_AMENDMENT 2 Connectors, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 18,
   "dimensions": 234,
   "dimensions_met": 234,
   "kind": "Performance specification sheet",
   "dated": "5 March 2026",
   "status": "Active, 5 March 2026",
   "newest": "Revision F Amendment 2 (all previous amendments incorporated), 5 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "6060-01-514-9665, backshell, fiber optic connector, M28876/29C2 (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-28876_29F w_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-28876_29F w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-28876_29F w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-28876_29F w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-28876_29F w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-28876_29F w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-28876_29F w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28876_29B1L-freecad.png",
    "pair": "Models/views/M28876_29B1L-pair.png",
    "record": "Models/views/M28876_29B1L-record.png",
    "front": "Models/views/M28876_29B1L-front.png",
    "top": "Models/views/M28876_29B1L-top.png",
    "right": "Models/views/M28876_29B1L-right.png",
    "cut": "Models/views/M28876_29B1L-cut.png"
   },
   "shown_part": "M28876/29B1L",
   "application": "FreeCAD 1.1.4",
   "modeled": "18 envelope solids, one per shell size and backshell designator that both Figure 1 and Table I define, each standing for class blank and class T: a mitred 90-degree elbow of two cylinders at B max that reaches A max along the coupling axis and C max below the top of the coupling nut, with an L-shaped cable passage at the largest cable diameter of the designator's range.",
   "not_modeled": [
    "The internal configuration and the backshell interface, including the coupling nut thread and splines, which note 4 sends to figure A-7 of MIL-PRF-28876, and the M DIA dimensioning footnote 1 sends to MIL-PRF-28876/9.",
    "The separate coupling nut, body, ring and knurled nut, and the hex flats, steps, tapers, the chamfered and rounded elbow and the marking drawn in Figure 1, none of which the sheet dimensions.",
    "The cable retainer with heatshrink below the rear end, which Figure 1 draws outside C without dimensions, and the cable seal and its grip on the smallest cable of each range.",
    "M28876/29C4L and M28876/29C4, which Table I lists without an A, B or C in Figure 1, and shell size 23 backshell designator 3, which Figure 1 dimensions without a Table I cable range.",
    "Classes blank and T, which set the aluminum finish (Table II) and do not change the shape.",
    "The 6.4 ounce maximum weight, which a solid filled to its outside envelope does not represent."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 e6c3c4860139.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "426 of 448 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "16 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (101 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "18 solids in STEP AP242. 234 of 234 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 2 (all previous amendments incorporated), 5 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table I lists backshell designators 4L and 4 for shell size 15 (cable 0.305 to 0.346), but the Figure 1 table gives A, B and C for shell size 15 only for 1L, 2L, 3L and 1, 2, 3, so M28876/29C4L and M28876/29C4 have no envelope and are not modeled.",
    "Model. The Figure 1 table gives A 3.9 max, B 2.250 max and C 4.200 max for shell size 23 backshell designators 1, 2 and 3, but Table I lists only designators 1 and 2 for shell size 23, so designator 3 has no cable range or PIN and is not modeled."
   ]
  },
  {
   "id": "MIL-PRF-28876/6F w/AMENDMENT 1",
   "slug": "mil-prf-28876-6f-w-amendment-1",
   "title": "Connectors, fiber optic, circular, plug style, multiple removable termini, screw threads, without backshell, environment resisting",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-28876_6F w_AMENDMENT 1 Connectors, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 4,
   "dimensions": 32,
   "dimensions_met": 32,
   "kind": "Performance specification sheet",
   "dated": "17 May 2022",
   "status": "Active, 9 March 2026",
   "newest": "Revision F Notice 1 - Validation, 9 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "6060-01-590-7742, connector, plug, fiber optic, M28876/6F1P1N (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-28876_6F w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-28876_6F w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-28876_6F w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-28876_6F w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-28876_6F w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-28876_6F w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-28876_6F w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28876_6C_-freecad.png",
    "pair": "Models/views/M28876_6C_-pair.png",
    "record": "Models/views/M28876_6C_-record.png",
    "front": "Models/views/M28876_6C_-front.png",
    "top": "Models/views/M28876_6C_-top.png",
    "right": "Models/views/M28876_6C_-right.png",
    "cut": "Models/views/M28876_6C_-cut.png"
   },
   "shown_part": "M28876/6C*****",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-PRF-28876/6 plug without backshell, fully assembled, one per shell size Table I lists (4 solids, M28876/6A***** to M28876/6F*****): a cylinder at the O maximum diameter for the shell size over the 1.870 maximum overall length.",
   "not_modeled": [
    "The knurled coupling nut, plug shell and insert retention nut outlines Figure 1 draws; the sheet dimensions only the O maximum diameter and the overall length.",
    "N DIA, which note 6 refers to appendix A of MIL-PRF-28876 and which this sheet does not give, and the insert retention nut internal configuration of figure A-8 of MIL-PRF-28876 (note 5).",
    "The mating interface, shell polarization (keyway positions 1 to 6) and master polarizing key of figures A-2, A-3, A-5, A-6 and A-7 of MIL-PRF-28876; the front face is closed.",
    "The insert arrangements of appendix B of MIL-PRF-28876 (figures B-1 to B-6), the style P and S termini of MIL-PRF-29504/14 and /15, and the 0.094 maximum fiber optic cable path to each terminus; the interior is solid.",
    "Safety wire holes (note 7), the identification marking (note 4), protective caps, the weight limits, and the finish of Table III.",
    "The 288 PINs of Table I that differ only in insert arrangement number, terminus/insert style, key position, backshell designator or class designator (the * positions of each part number) share the solid of their shell size."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 37957ff56fe8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "499 of 519 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 5 tables (56 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 32 of 32 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 1 - Validation, 9 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. This sheet gives no N DIA value (note 6 refers it to appendix A of MIL-PRF-28876) and no length for the coupling nut, plug shell or insert retention nut, so the solids carry O max over the whole 1.870 length; an engineer must take the insert retention nut diameter and the section lengths from MIL-PRF-28876 before the solids are used for more than a space claim.",
    "Model. Table II backshell designator N supplies the plug without the insert retention nut, and the sheet gives no overall length for that configuration, so N plugs share the 1.870 max fully assembled envelope."
   ]
  },
  {
   "id": "MIL-PRF-28876/7F",
   "slug": "mil-prf-28876-7f",
   "title": "Connectors, fiber optic, circular, plug style, multiple removable termini, screw threads, with straight backshell, environment resisting",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-28876_7F Connectors, fiber optic",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 4,
   "solids": 11,
   "dimensions": 110,
   "dimensions_met": 110,
   "kind": "Performance specification sheet",
   "dated": "1 March 2021",
   "status": "Active, 4 March 2026",
   "newest": "Revision F Notice 1 - Validation, 4 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 5,
   "by_class": {
    "Virginia": 5
   },
   "stock_examples": [
    "6060-01-510-7205, connector, plug, fiber optic, M28876/7F11P6 (Virginia)",
    "6060-01-510-7210, connector, plug, fiber optic, M28876/7F11P5 (Virginia)",
    "6060-01-510-7213, connector, plug, fiber optic, M28876/7F11P4 (Virginia)",
    "6060-01-510-7214, connector, plug, fiber optic, M28876/7F11P2 (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-28876_7F package.pdf",
    "scan": "MIL-PRF-28876_7F legacy scan.pdf",
    "clean": "MIL-PRF-28876_7F clean copy.pdf",
    "record": "MIL-PRF-28876_7F validation record.pdf",
    "sheet": "MIL-PRF-28876_7F 3D model.pdf",
    "parts": "MIL-PRF-28876_7F parts list.pdf",
    "inspection": "MIL-PRF-28876_7F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28876_7C_1_-freecad.png",
    "pair": "Models/views/M28876_7C_1_-pair.png",
    "record": "Models/views/M28876_7C_1_-record.png",
    "front": "Models/views/M28876_7C_1_-front.png",
    "top": "Models/views/M28876_7C_1_-top.png",
    "right": "Models/views/M28876_7C_1_-right.png",
    "cut": "Models/views/M28876_7C_1_-cut.png"
   },
   "shown_part": "M28876/7C*1***",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-PRF-28876/7 plug with straight backshell, fully assembled, one per shell size and backshell dash number Table I permits (11 solids, M28876/7A*1*** to M28876/7F*3***): a cylinder at the O maximum diameter for the shell size over the 5.960 maximum overall length, with a cable entry in the rear face at the Table II maximum cable outer diameter.",
   "not_modeled": [
    "The plug shell, knurled coupling nut, safety wire ring, backshell coupling nut and backshell outlines Figure 1 draws; the sheet dimensions only the O maximum diameter and the overall length.",
    "N DIA, which note 5 refers to appendix A of MIL-PRF-28876 and which this sheet does not give.",
    "The mating interface, shell polarization (keyway positions 1 to 6) and master polarizing key of figures A-1, A-3, A-5, A-6 and A-7 of MIL-PRF-28876; the front face is closed.",
    "The insert arrangements of appendix B of MIL-PRF-28876, the style P and S termini of MIL-PRF-29504/14 and /15, and the cable path to them; the interior ahead of the cable entry is solid.",
    "The optional boot, which Figure 1 draws behind the 5.960 overall length without dimensions.",
    "Safety wire holes (note 6), the identification marking (note 4), protective caps, the weight limits, and the finish of Table III.",
    "The 408 PINs of Table I that differ only in insert arrangement number, terminus/insert style, key position or class designator (the * positions of each part number) share the solid of their shell size and backshell dash number."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 c2e46633cc58.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "442 of 447 items agreed. 5 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 5 tables (72 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "11 solids in STEP AP242. 110 of 110 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 1 - Validation, 4 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 1, callout SAFETY WIRE: read as WIRE, could be WIRF.",
    "Model. This sheet gives no N DIA value (note 5 refers it to appendix A of MIL-PRF-28876) and no length for the plug shell, coupling nut or backshell, so the solids carry O max over the whole 5.960 length; an engineer must take the backshell diameter and the section lengths from MIL-PRF-28876 before the solids are used for more than a space claim.",
    "Model. Figure 1 draws the optional boot behind the rear of the backshell, outside the 5.960 max fully assembled length, with no length or diameter, so the space the boot needs behind the backshell is not defined."
   ]
  },
  {
   "id": "MIL-PRF-28876/8F",
   "slug": "mil-prf-28876-8f",
   "title": "Connectors, fiber optic, circular, plug style, multiple removable termini, screw threads, with 45-DEGREE backshell, environment resisting",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-28876_8F Connectors, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 11,
   "dimensions": 176,
   "dimensions_met": 176,
   "kind": "Performance specification sheet",
   "dated": "1 March 2021",
   "status": "Active, 4 March 2026",
   "newest": "Revision F Notice 1 - Validation, 4 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "6060-01-590-8563, connector, plug, fiber optic, M28876/8F11P3 (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-28876_8F package.pdf",
    "scan": "MIL-PRF-28876_8F legacy scan.pdf",
    "clean": "MIL-PRF-28876_8F clean copy.pdf",
    "record": "MIL-PRF-28876_8F validation record.pdf",
    "sheet": "MIL-PRF-28876_8F 3D model.pdf",
    "parts": "MIL-PRF-28876_8F parts list.pdf",
    "inspection": "MIL-PRF-28876_8F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28876_8C_1_-freecad.png",
    "pair": "Models/views/M28876_8C_1_-pair.png",
    "record": "Models/views/M28876_8C_1_-record.png",
    "front": "Models/views/M28876_8C_1_-front.png",
    "top": "Models/views/M28876_8C_1_-top.png",
    "right": "Models/views/M28876_8C_1_-right.png",
    "cut": "Models/views/M28876_8C_1_-cut.png"
   },
   "shown_part": "M28876/8C*1***",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-PRF-28876/8 plug with 45-degree backshell, fully assembled, one per shell size and backshell dash number Table I permits (11 solids, M28876/8A*1*** to M28876/8F*3***): a cylinder at the O maximum diameter joined to a mitred 45-degree elbow at the M maximum diameter that reaches the AF and AG maximums, with a cable entry in the rear face at the Table II maximum cable outer diameter.",
   "not_modeled": [
    "The plug shell, knurled coupling nut, backshell coupling nut, backshell clamp and backshell screw outlines Figure 1 draws; the sheet dimensions only the O, M, AF and AG maximums.",
    "N DIA, which note 5 refers to appendix A of MIL-PRF-28876 and which this sheet does not give.",
    "The mating interface, shell polarization (keyway positions 1 to 6) and master polarizing keyway of figures A-1, A-3, A-5, A-6 and A-7 of MIL-PRF-28876, and the clocking of the backshell to the keyway that the front view draws; the front face is closed.",
    "The insert arrangements of appendix B of MIL-PRF-28876 (figures B-1 to B-6), the style P and S termini of MIL-PRF-29504/14 and /15, and the cable path to them; the interior ahead of the cable entry is solid.",
    "The optional boot, which Figure 1 draws behind the rear of the backshell, outside the AF and AG limits, without dimensions.",
    "Safety wire holes (note 6), the identification marking (note 4), protective caps, the weight limits, and the finish of Table III.",
    "The 408 PINs of Table I that differ only in insert arrangement number, terminus/insert style, key position or class designator (the * positions of each part number) share the solid of their shell size and backshell dash number."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 c99cdab8d849.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "463 of 476 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 5 tables (84 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "11 solids in STEP AP242. 176 of 176 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 1 - Validation, 4 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. This sheet gives no N DIA value (note 5 refers it to appendix A of MIL-PRF-28876) and no length for the plug shell, coupling nut, backshell entry or backshell leg, so the bend point and leg length are derived from the AF, AG and M maximums; an engineer must take the backshell geometry from MIL-PRF-28876 or the backshell drawing before the solids are used for more than a space claim.",
    "Model. Figure 1 draws the optional boot behind the rear of the backshell, outside the AF max fully assembled length and the AG max height, with no length or diameter, so the space the boot needs is not defined."
   ]
  },
  {
   "id": "MIL-PRF-2940D",
   "slug": "mil-prf-2940d",
   "title": "Snubbers, fluid pressure, instrument protection",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-2940D Snubbers, fluid pressure",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "13 April 1999",
   "status": "Active, 26 February 2021",
   "newest": "Revision D Notice 1 - Validation, 26 February 2021",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 2
   },
   "stock_examples": [
    "6685-01-516-0491, dampener, fluid pressure, MIL-PRF-2940 (Virginia)",
    "6685-01-516-0492, dampener, fluid pressure, MIL-PRF-2940 (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-2940D package.pdf",
    "scan": "MIL-PRF-2940D legacy scan.pdf",
    "clean": "MIL-PRF-2940D clean copy.pdf",
    "record": "MIL-PRF-2940D validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, 1 scanned. SHA-256 0ad57b90520b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,681 of 4,681 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "10 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 11 tables (122 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-2940D is a performance specification for fluid pressure instrument snubbers that defines types, classes, materials, test pressures and test methods, gives only envelope limits for body length, hex across flats and body diameter, and refers end-connection threads to other documents, with no dimensioned drawing of a part.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 26 February 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-29504/15B w/AMENDMENT 1",
   "slug": "mil-prf-29504-15b-w-amendment-1",
   "title": "Termini, fiber optic, connector, removable, environment resisting, socket terminus, front release, ceramic ferrule (for use with MIL-PRF-28876 connectors)",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-29504_15B w_AMENDMENT 1 Termini, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 12,
   "dimensions": 144,
   "dimensions_met": 144,
   "kind": "Performance specification sheet",
   "dated": "30 April 2024",
   "status": "Active, 30 April 2024",
   "newest": "Revision B Amendment 1 (amendment incorporated), 30 April 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1
   },
   "stock_examples": [
    "6060-01-518-0357, contact, fiber optic, M29504/15-4181C (Virginia)",
    "6060-01-493-3507, contact, fiber optic, M29504/15-4181 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-29504_15B w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-29504_15B w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-29504_15B w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-29504_15B w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-29504_15B w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-29504_15B w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-29504_15B w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M29504_15-4175-freecad.png",
    "pair": "Models/views/M29504_15-4175-pair.png",
    "record": "Models/views/M29504_15-4175-record.png",
    "front": "Models/views/M29504_15-4175-front.png",
    "top": "Models/views/M29504_15-4175-top.png",
    "right": "Models/views/M29504_15-4175-right.png",
    "cut": "Models/views/M29504_15-4175-cut.png"
   },
   "shown_part": "M29504/15-4175",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the MIL-PRF-29504/15 front release socket terminus, one per TICC number of Table I (12 solids, M29504/15-4170 to -4201): the alignment sleeve, ferrule and body as one body of revolution with the .955 or .755 overall length, the Figure 1 diameters, the A ferrule bore and the C internal buffer guide.",
   "not_modeled": [
    "The retaining clip and the environmental seal (O-ring), which Figure 1 draws without dimensions; the clip seat is the shoulder at the rear of the .102 section.",
    "The exposed ferrule length of note 9 (.156 min): the ferrule, alignment sleeve and body are one solid, so the ferrule has no separate length.",
    "The undimensioned details Figure 1 and Figure 2 draw: the lead-in at the front of the alignment sleeve, the slot in the sleeve section, the taper from the body to the crimp diameter, and the rear chamfer.",
    "TICC color bands (notes 6, 8 and 12), the manufacturer's symbol, crimp grooves (note 13), radiused end faces (note 11) and the metric ferrule diameter of note 14.",
    "Concentricity (note 3) and ferrule circular runout, which the solids meet exactly by construction, and the .035 ounce weight limit and materials.",
    "The optional crimp sleeve, which the sheet does not dimension; each C-suffix PIN (crimp sleeve provided) shares the solid of its TICC number.",
    "The insert-equivalent gauge fixture of Figure 3, which is a measuring fixture and not a part number, and the tools of Table II."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, 0 scanned. SHA-256 0b1ceb2ac983.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,382 of 2,404 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "44 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 10 tables (445 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "12 solids in STEP AP242. 144 of 144 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Amendment 1 (amendment incorporated), 30 April 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet defines the short terminus only by its .755 max overall length (note 7) and does not say which sections are shorter, so the short solids take the .200 out of the body behind the seal; an engineer must confirm the short terminus layout.",
    "Model. The sheet gives no length for the .118/.115 alignment sleeve section, the .102 section, the .118/.114 body or the .080/.074 crimp section, and no outside diameter for the retaining clip or O-ring, so those lengths come from Figure 1 in proportion and must be confirmed before the solids are used for more than a space claim."
   ]
  },
  {
   "id": "MIL-PRF-39006/32",
   "slug": "mil-prf-39006-32",
   "title": "Capacitors, fixed, electrolytic (non-solid electrolyte), tantalum, (non-polarized, sintered slug) 85\u00b0C (voltage derated to 125\u00b0C), established reliability, style CLR82",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-39006_32 Capacitors, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 64,
   "dimensions": 896,
   "dimensions_met": 896,
   "kind": "Performance specification sheet",
   "dated": "15 January 1998",
   "status": "Canceled, 24 February 2006",
   "newest": "Notice 1 - Cancellation, 24 February 2006",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5910-01-517-8933, capacitor, fixed, electrolytic, M39006/32 (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-39006_32 package.pdf",
    "scan": "MIL-PRF-39006_32 legacy scan.pdf",
    "clean": "MIL-PRF-39006_32 clean copy.pdf",
    "record": "MIL-PRF-39006_32 validation record.pdf",
    "sheet": "MIL-PRF-39006_32 3D model.pdf",
    "parts": "MIL-PRF-39006_32 parts list.pdf",
    "inspection": "MIL-PRF-39006_32 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39006_32-0135-freecad.png",
    "pair": "Models/views/M39006_32-0135-pair.png",
    "record": "Models/views/M39006_32-0135-record.png",
    "front": "Models/views/M39006_32-0135-front.png",
    "top": "Models/views/M39006_32-0135-top.png",
    "right": "Models/views/M39006_32-0135-right.png",
    "cut": "Models/views/M39006_32-0135-cut.png"
   },
   "shown_part": "M39006/32-0135",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style CLR82 capacitor, one for each of the 64 dash numbers of table 1, all case size T4: a round insulated case .406 in diameter and L 1.0695 long with square ends, a terminal weld boss .094 long on one end, a tantalum feed-through .078 in diameter and .250 long on the other, and a lead .025 in diameter on the axis out of each end, E 2.250 long from the end of the case.",
   "not_modeled": [
    "The H form of each dash number (M39006/32-0007H for the optional vibration and shock requirements): it changes only the test levels, so the solid of the dash number stands for both forms.",
    "The basic case diameter D (.375 \u00b1.016): it lies under the insulating sleeve and is not a surface of the envelope solid, so it has no check.",
    "The inside of the capacitor (the sintered tantalum slugs, the electrolyte, the case wall and the glass seal): each solid is the outside shape as one body.",
    "The insulating sleeve as a separate body, its length over the basic case (footnote 1/ refers it to MIL-PRF-39006) and its lap over the ends of the case drawn dashed in figure 1.",
    "The shape of the terminal weld and of the external weld at the end of the feed-through (note 4), both drawn without dimensions, and the positional tolerance zone of the feed-through terminal, which the solids place on true position.",
    "The lead types N32, N51 and N52 of MIL-STD-1276, marking, and the electrical ratings and tests, none of which change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 ec352a6a2d53.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,051 of 1,065 items agreed. All 8 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "165 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (277 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "64 solids in STEP AP242. 896 of 896 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Notice 1 - Cancellation, 24 February 2006. ASSIST also holds Amendment 1 (2 April 2003). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Footnote 1/ leaves the length of the insulating sleeve over the basic case to MIL-PRF-39006, so this sheet does not give how far the sleeve runs past each end of the case; the solids end it flush with the case."
   ]
  },
  {
   "id": "MIL-PRF-39012/18H w/AMENDMENT 2",
   "slug": "mil-prf-39012-18h-w-amendment-2",
   "title": "Connectors, receptacle, electrical, coaxial, radio frequency, (series bnc, (cabled), socket contact, flange mounted, class 2)",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-39012_18H w_AMENDMENT 2 Connectors, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 17,
   "solids": 29,
   "dimensions": 393,
   "dimensions_met": 393,
   "kind": "Performance specification sheet",
   "dated": "18 March 2019",
   "status": "Active, 30 April 2024",
   "newest": "Revision H Notice 2 - Validation, 30 April 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-515-2452, connector, receptacle, electrical, M39012/18-0504 (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-39012_18H w_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-39012_18H w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-39012_18H w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-39012_18H w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-39012_18H w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-39012_18H w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-39012_18H w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39012_18-X504-freecad.png",
    "pair": "Models/views/M39012_18-X504-pair.png",
    "record": "Models/views/M39012_18-X504-record.png",
    "front": "Models/views/M39012_18-X504-front.png",
    "top": "Models/views/M39012_18-X504-top.png",
    "right": "Models/views/M39012_18-X504-right.png",
    "cut": "Models/views/M39012_18-X504-cut.png"
   },
   "shown_part": "M39012/18-X504",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 23 MIL-PRF-39012/18 BNC flange-mounted cabled receptacles (Table I categories A, C and D, Table IV category B) with the square flange and four mounting holes of Figure 1, plus the three category D center contacts and three crimp ferrules of Figure 3.",
   "not_modeled": [
    "The series BNC socket interface and bayonet studs (note 9, MIL-STD-348), the dimension marked 9 and the .120 max panel allowance measured from it, the insulator, the captivated contact inside the body and the cable entry.",
    "The Figure 2 category D captivation detail (.077 \u00b1.002 diameter, .036 min, .032 \u00b1.006 from the reference plane), which sits on the MIL-STD-348 reference plane inside the body.",
    "The flange corner radii, the taper ahead of the flange and the rear corner radius, drawn but not dimensioned (note 6); wrench flats (note 4); the concave depression between the studs (Figure 2 note 3); the thread form of the mounting holes.",
    "The tapered socket end of the center contact with its socket bore and slots, the reference plane .206/.186 from the socket end (a datum with no feature on the solid), the drill point at the bore bottom, the .003 max edge break (note 5) and the color bands.",
    "The Figure 4 cable stripping dimensions, which describe the cable, not a part."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "17 pages, 0 scanned. SHA-256 c28e95b09845.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,780 of 1,854 items agreed. All 34 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "112 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 14 tables (399 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "29 solids in STEP AP242. 393 of 393 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Notice 2 - Validation, 30 April 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 prints the forward barrel diameter as .435 MAX, but the conversion table beside it lists .436 (11.07 mm) and no .435; the solids use .435."
   ]
  },
  {
   "id": "MIL-PRF-39012/3H w/AMENDMENT 5",
   "slug": "mil-prf-39012-3h-w-amendment-5",
   "title": "Connectors, receptacles, electrical, coaxial, radio frequency (series N (cabled), jam nut mounted, socket contact, class 2)",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-39012_3H w_AMENDMENT 5 Connectors, receptacles",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 16,
   "solids": 49,
   "dimensions": 366,
   "dimensions_met": 366,
   "kind": "Performance specification sheet",
   "dated": "1 April 2022",
   "status": "Active, 1 April 2022",
   "newest": "Revision H Amendment 5 (all previous amendments incorporated), 1 April 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-514-9753, connector, receptacle, electrical, M39012/03-0102 (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-39012_3H w_AMENDMENT 5 package.pdf",
    "scan": "MIL-PRF-39012_3H w_AMENDMENT 5 legacy scan.pdf",
    "clean": "MIL-PRF-39012_3H w_AMENDMENT 5 clean copy.pdf",
    "record": "MIL-PRF-39012_3H w_AMENDMENT 5 validation record.pdf",
    "sheet": "MIL-PRF-39012_3H w_AMENDMENT 5 3D model.pdf",
    "parts": "MIL-PRF-39012_3H w_AMENDMENT 5 parts list.pdf",
    "inspection": "MIL-PRF-39012_3H w_AMENDMENT 5 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MIL-PRF-39012_3_contact_3-10-freecad.png",
    "pair": "Models/views/MIL-PRF-39012_3_contact_3-10-pair.png",
    "record": "Models/views/MIL-PRF-39012_3_contact_3-10-record.png",
    "front": "Models/views/MIL-PRF-39012_3_contact_3-10-front.png",
    "top": "Models/views/MIL-PRF-39012_3_contact_3-10-top.png",
    "right": "Models/views/MIL-PRF-39012_3_contact_3-10-right.png",
    "cut": "Models/views/MIL-PRF-39012_3_contact_3-10-cut.png"
   },
   "shown_part": "MIL-PRF-39012/3 contact 3-10",
   "application": "FreeCAD 1.1.4",
   "modeled": "41 envelope solids of the MIL-PRF-39012/3 Series N jam nut mounted receptacles, one per dash number in tables I and III, each A long and B in diameter with the .625-24 UNEF-2A mounting thread and its two flats ahead of the mounting face; plus the jam nut and lockwasher of figure 1 and the 2 category D center contacts and 4 crimp ferrules of figure 3.",
   "not_modeled": [
    "The Series N socket contact interface, insulator, center contact position and front chamfer, which note 7 sends to MIL-STD-348; the connector solids are solid envelopes with no bore or cable entry.",
    "The category D captivation detail of figure 2 (.484 \u00b1 .007 contact shoulder to reference plane, .032 MIN shoulder, .103 MIN entry hole with its .010 concentricity to datum A, .320/.316 bore, .422 MIN bore length, 30\u00b0 chamfer), which sits inside the envelope.",
    "The mounting seal, which figure 1 draws without dimensions, the wrench flats of note 4, and the .250 MAX panel thickness, which is a mounting allowance rather than a surface of the connector.",
    "The thread form of the .625-24 UNEF-2A mounting thread and the jam nut, the internal teeth of the lockwasher and the corner chamfers of the jam nut.",
    "The suggested mounting hole, which is a panel cutout; the solids are checked to pass through it.",
    "The cable stripping lengths of figure 4, which describe the cable, not a connector part.",
    "The .207/.187 distance from the reference plane to the front of the center contact, which locates the contact in the assembled connector rather than shaping it.",
    "The tapered outside and socket bore of the center contact's mating end, which figure 3 draws but does not dimension, the color bands, and the .003 maximum edge break of note 5.",
    "Plating option X (silver or nickel), which does not change geometry: one solid stands for both platings of a dash number."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "16 pages, 2 scanned. SHA-256 ad5cb91456c6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,823 of 1,870 items agreed. All 25 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "100 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "15 pages of searchable text, 11 tables (638 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "49 solids in STEP AP242. 366 of 366 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 5 (all previous amendments incorporated), 1 April 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table IV, column 'Preferred PIN M39012/03 (except as otherwise specified in tables I or III)': -14 then 0.0015. Page 15 prints .0015 with a period where the neighbouring rows print a hyphen (-0013, -0014, -0020); the old text layer also reads .0015. The printed value itself looks wrong: by its series it should read -0015."
   ]
  },
  {
   "id": "MIL-PRF-39019/4H w/AMENDMENT 1",
   "slug": "mil-prf-39019-4h-w-amendment-1",
   "title": "Circuit breakers, magnetic, low-power, sealed, trip-free two-pole, auxiliary contacts",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-39019_4H w_AMENDMENT 1 Circuit breakers, magnetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 220,
   "dimensions": 8470,
   "dimensions_met": 8470,
   "kind": "Performance specification sheet",
   "dated": "5 March 2025",
   "status": "Active, 5 March 2025",
   "newest": "Revision H Amendment 1 (amendment incorporated), 5 March 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1
   },
   "stock_examples": [
    "5925-01-597-1262, circuit breaker, M39019/04-230S (Virginia)",
    "5925-01-497-1061, circuit breaker, M39019/04-215S (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-39019_4H w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-39019_4H w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-39019_4H w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-39019_4H w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-39019_4H w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-39019_4H w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-39019_4H w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39019_04-257-freecad.png",
    "pair": "Models/views/M39019_04-257-pair.png",
    "record": "Models/views/M39019_04-257-record.png",
    "front": "Models/views/M39019_04-257-front.png",
    "top": "Models/views/M39019_04-257-top.png",
    "right": "Models/views/M39019_04-257-right.png",
    "cut": "Models/views/M39019_04-257-cut.png"
   },
   "shown_part": "M39019/04-257",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of all 220 M39019/04 part numbers, the 110 dash numbers of Table I in configuration 1 (four solder-lug main terminals and three auxiliary pins) and configuration 2 (S suffix, an insulating block over the screw terminals): the 1.562 by 1.281 case, the .610 dia bushing shoulder and .375-32 UNEF-2A bushing with its keyway, the two threaded inserts with .138-32 tapped holes, and the toggle thrown to OFF with its .240 spherical tip.",
   "not_modeled": [
    "Mounting hardware: the hex nut of note 5 (.375-32 UNEF-2B, .093 \u00b1.005 thick, MS25082-20), the internal tooth lockwasher of note 6 (.507/.493 O.D., .392/.382 I.D., .025 \u00b1.005 thick), the on-off plate, the lock ring of note 9 and the panel seal O-ring.",
    "The sealscrews of note 11 (.138-32 UNC-2A x .312) in the threaded inserts; the tapped holes are left open.",
    "Configuration 2's main terminal screws (.138-32 x .250, MS35265-26, No. 6 lockwashers, note 15) and its auxiliary terminals, which sit inside the insulating block; the block is a solid envelope, so the .906, .250, .312 and .625 terminal positions are checked on configuration 1 only.",
    "The hooked solder-lug form of the configuration 1 main terminals, the style and form of the auxiliary terminals (note 14 leaves them optional), thread forms, the 8\u00b0 to 14\u00b0 ON position of the toggle, marking (note 8) and the circuit diagram numbering (note 10).",
    "The panel mounting detail's panel cutout itself (.391, .140 and .125 \u00b1.005 holes, the .125 locating hole .062 min deep and .325 \u00b1.005 from the bushing center), which is used only to check the breaker's fit.",
    "The Table I electrical ratings, time delay, resistance and impedance, the voltage and inrush ratings and the 100 gram reference weight, which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 1 scanned. SHA-256 88c5bc540427.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,390 of 1,419 items agreed. All 23 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "597 checks on size series and limits. 16 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 3 tables (774 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "220 solids in STEP AP242. 8,470 of 8,470 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 1 (amendment incorporated), 5 March 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-6855F w/AMENDMENT 1",
   "slug": "mil-prf-6855f-w-amendment-1",
   "title": "Rubber, synthetic, sheets, strips, molded or extruded shapes, general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-6855F w_AMENDMENT 1 Rubber, synthetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 18,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "27 February 2012",
   "status": "Active, 1 August 2022",
   "newest": "Revision F Notice 2 - Validation, 1 August 2022",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 5,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1,
    "Seawolf": 3
   },
   "stock_examples": [
    "4730-01-721-2457, sleeve, connecting, non-metallic, MIL-A-6855 CL 2 TY A GR 50 (Virginia)",
    "5325-01-494-2332, grommet, nonmetallic, MIL-R-6855 CL-1 GR-60 (Los Angeles)",
    "9390-01-432-6470, nonmetallic rod, MIL-R-6855 (Seawolf)",
    "9320-01-433-8937, rubber sheet, solid, MIL-R-6855 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-6855F w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-6855F w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-6855F w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-6855F w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, 0 scanned. SHA-256 0e74cc50a40d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "7,140 of 7,184 items agreed. All 23 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "211 checks on size series and limits. 6 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "17 pages of searchable text, 9 tables (870 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-6855 is a general performance specification for synthetic rubber sheet, strip, tubing, rod and molded or extruded shapes that sets classes, grades and types, physical and aging properties (Tables V and VI), inspection (Tables VII and VIII) and only percentage or band tolerances by size range for width, thickness, wall and diameter (Tables I to IV), leaving part dimensions to the specification sheets and the order (3.1, 3.4, 6.2); its only figure, Figure 1, is the stress-crazing test beam setup, not a part.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 2 - Validation, 1 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table V, column 'Properties after immersion / Phase C 2/ dried 4 hrs at 158\u00b12 \u00b0F (70\u00b11 \u00b0C) / Post immersion test / Change in volume / Maximum % of original': -10 then -15. Page 7 and the source text layer both print -15 for Class 1 grade 50, between -10 for grades 30 and 40 and -8, -7, -5 for grades 60 to 80; the printed -15 breaks an otherwise rising series and looks wrong for it, a point for an engineer."
   ]
  },
  {
   "id": "MIL-PRF-6855/1A",
   "slug": "mil-prf-6855-1a",
   "title": "Rubber, synthetic, sheets",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-6855_1A Rubber, synthetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 95,
   "dimensions": 285,
   "dimensions_met": 285,
   "kind": "Performance specification sheet",
   "dated": "15 June 2009",
   "status": "Active, 1 August 2022",
   "newest": "Revision A Notice 2 - Validation, 1 August 2022",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 5,
   "by_class": {
    "Virginia": 3,
    "Seawolf": 2
   },
   "stock_examples": [
    "9320-01-519-7706, rubber sheet, solid, M6855/1-082887 (Virginia)",
    "9320-01-519-7724, rubber sheet, solid, M6855/1-105687 (Virginia)",
    "9320-01-519-7731, rubber sheet, solid, M6855/1-043237 (Virginia)",
    "9320-01-433-8937, rubber sheet, solid, M6855/1-043287 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-6855_1A package.pdf",
    "scan": "MIL-PRF-6855_1A legacy scan.pdf",
    "clean": "MIL-PRF-6855_1A clean copy.pdf",
    "record": "MIL-PRF-6855_1A validation record.pdf",
    "sheet": "MIL-PRF-6855_1A 3D model.pdf",
    "parts": "MIL-PRF-6855_1A parts list.pdf",
    "inspection": "MIL-PRF-6855_1A inspection report.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {
    "iso": "Models/views/M6855_1-XX4035-freecad.png",
    "pair": "Models/views/M6855_1-XX4035-pair.png",
    "record": "Models/views/M6855_1-XX4035-record.png",
    "front": "Models/views/M6855_1-XX4035-front.png",
    "top": "Models/views/M6855_1-XX4035-top.png",
    "right": "Models/views/M6855_1-XX4035-right.png",
    "cut": "Models/views/M6855_1-XX4035-cut.png"
   },
   "shown_part": "M6855/1-XX4035",
   "application": "FreeCAD 1.1.4",
   "modeled": "Flat rectangular synthetic rubber sheets: one block for each of the 95 pairs of the 19 thicknesses of Table II (0.015 to 1.500) and the 5 widths of Table IV (12.000 to 40.000), at sheet length number 3 (48.000), each standing for all 42 Table I classification numbers at that size.",
   "not_modeled": [
    "Material: the 42 Table I classification numbers (type, class and grade) set the material requirements, not the shape, so the 31,920 part numbers come to 760 shapes, each named M6855/1-XX followed by its thickness, length and width numbers, with XX for the classification number.",
    "Lengths: 760 shapes is more than 400, so every thickness and width is built at length number 3 (48.000), the shortest Table III length longer than every Table IV width; the sheets at the other 7 lengths (24.000, 36.000, 60.000, 72.000, 120.000, 144.000, 300.000) are not built.",
    "The width and thickness tolerances, which the sheet takes from MIL-PRF-6855, table I and MIL-PRF-6855, table II and does not print; each width and thickness is checked at its table value.",
    "Physical and mechanical properties of each classification (MIL-PRF-6855) and the inspection and test provisions of MIL-PRF-6855, Section 4."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 30fcbd3fb282.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "605 of 613 items agreed. All 11 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "155 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 5 tables (307 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "95 solids in STEP AP242. 285 of 285 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 2 - Validation, 1 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The metric conversion chart prints 0.567 inch beside 14.27 mm, but 0.567 inch is 14.40 mm, 14.27 mm is 0.562 inch to three places, Table II gives 0.562 for thickness number 52 and no thickness of 0.567, and the chart has no 0.562 row; the thickness number 52 solids are built at Table II's 0.562, and the engineer should confirm the chart's 0.567 is a misprint of 0.562."
   ]
  },
  {
   "id": "MIL-PRF-6855/5A",
   "slug": "mil-prf-6855-5a",
   "title": "Rubber, synthetic, channel, extruded",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-6855_5A Rubber, synthetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 98,
   "dimensions": 1090,
   "dimensions_met": 1086,
   "kind": "Performance specification sheet",
   "dated": "15 June 2009",
   "status": "Active, 1 August 2022",
   "newest": "Revision A Notice 2 - Validation, 1 August 2022",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "9390-01-620-8827, nonmetallic channel, M6855/5-B0209D (Virginia)",
    "9390-01-496-2512, nonmetallic channel, M6855/5-A36100 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-6855_5A package.pdf",
    "scan": "MIL-PRF-6855_5A legacy scan.pdf",
    "clean": "MIL-PRF-6855_5A clean copy.pdf",
    "record": "MIL-PRF-6855_5A validation record.pdf",
    "sheet": "MIL-PRF-6855_5A 3D model.pdf",
    "parts": "MIL-PRF-6855_5A parts list.pdf",
    "inspection": "MIL-PRF-6855_5A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/M6855_5-B12XXD-freecad.png",
    "pair": "Models/views/M6855_5-B12XXD-pair.png",
    "record": "Models/views/M6855_5-B12XXD-record.png",
    "front": "Models/views/M6855_5-B12XXD-front.png",
    "top": "Models/views/M6855_5-B12XXD-top.png",
    "right": "Models/views/M6855_5-B12XXD-right.png",
    "cut": "Models/views/M6855_5-B12XXD-cut.png"
   },
   "shown_part": "M6855/5-B12XXD",
   "application": "FreeCAD 1.1.4",
   "modeled": "Extruded synthetic rubber channels: one straight channel for each of the 49 configurations of Tables IA to ID (20 Style A, 6 Style B, 10 Style C and 13 Style D, Figure 1) at both Table III lengths (48.000 and 168.000), 98 solids, each standing for every Table II classification number allowed at that configuration.",
   "not_modeled": [
    "Material: the 42 Table II classification numbers (type, class and grade) set the rubber, not the shape, and Note 4 limits the configurations it marks to grades 50 to 80, so the 3,612 part numbers come to 98 solids, each named M6855/5- with its configuration number, XX for the classification number, and its length letter.",
    "The surface finish requirement (smooth and free from pin holes, flash or other imperfections).",
    "Physical properties and the inspection and test provisions, which the sheet takes from MIL-PRF-6855, Section 4."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 bb77eb7ce668.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,004 of 1,076 items agreed. All 67 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "504 checks on size series and limits. 27 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 8 tables (862 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "98 solids in STEP AP242. 1,086 of 1,090 stated dimensions measure within limits; 4 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 2 - Validation, 1 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Configuration C16 prints inside fillet radii J 0.031 and K 0.031, which need 0.062 of floor, but the inside width B - E - F is 0.156 - 0.063 - 0.063 = 0.030; the solids round the floor fully at radius 0.015, so the J and K checks fail, and the engineer should settle the radii or the widths.",
    "Model. Table IV covers 0.041 in no row (\"0.015 to 0.040 inclusive\" ends below it and \"Over 0.041 to 0.062 inclusive\" starts above it), so D02 D has no stated tolerance; the checks use \u00b10.012 inches from the row that names 0.041."
   ]
  },
  {
   "id": "MIL-PRF-83536/2D W/AMENDMENT 2",
   "slug": "mil-prf-83536-2d-w-amendment-2",
   "title": "Relays, electromagnetic, established reliability, dpdt, low level to 5 amperes, permanent magnet drive, hermetically sealed, all welded, transient suppressed DC coils",
   "class": "Virginia",
   "folder": "Virginia/MIL-PRF-83536_2D W_AMENDMENT 2 Relays, electromagnetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 16,
   "solids": 41,
   "dimensions": 681,
   "dimensions_met": 681,
   "kind": "Performance specification sheet",
   "dated": "19 November 2024",
   "status": "Active, 19 November 2024",
   "newest": "Revision D Amendment 2 (all previous amendments incorporated), 19 November 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5945-01-554-6085, relay, electromagnetic, M83536/2-026P (Virginia)"
   ],
   "files": {
    "package": "MIL-PRF-83536_2D W_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-83536_2D W_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-83536_2D W_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-83536_2D W_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-83536_2D W_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-83536_2D W_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-83536_2D W_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M83536_2-009-freecad.png",
    "pair": "Models/views/M83536_2-009-pair.png",
    "record": "Models/views/M83536_2-009-record.png",
    "front": "Models/views/M83536_2-009-front.png",
    "top": "Models/views/M83536_2-009-top.png",
    "right": "Models/views/M83536_2-009-right.png",
    "cut": "Models/views/M83536_2-009-cut.png"
   },
   "shown_part": "M83536/2-009",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of all 41 dash numbers M83536/2-001 to -041 of Table III: the .810 by .640 by .410 relay can with its eight terminals in the Table III style (solder pin, solder hook, socket pin with gasket, or 90\u00b0 solder pin) and its mount (none, RVFM or HFM slotted flanges, track mount A rails, or the track mount B knob, cross pin, polarizing pin and grounding pin).",
   "not_modeled": [
    "The failure rate suffix letters L, M, P and R that complete each part number; they do not change the geometry, so each dash number has one solid.",
    "The panel mounting hole layouts for RVFM and HFM (two .140 \u00b1.003 holes on 1.070 centers, and the RVFM .850 by .450 cutout with .031 radius corners at .110 and .225); the flange slot spacing is checked against 1.070.",
    "Corner radii of the can, the flange tab corners and the track mount A rail corner radius (.015/.005 R); all are left sharp.",
    "The vertical leg of the bent RVFM and HFM flanges, whose height is not dimensioned.",
    "The track mount B knob profile (waist, chamfer, post and cap), the .060 MIN cross pin travel, the engaged cross pin position and the 29 degree knob rotation of notes 15 to 17 and 20.",
    "Rounded terminal tips, the contrasting bead, markings, circuit diagram, nameplate, plating and finishes, gasket hardness, and the internal coil, contacts and suppression diodes.",
    "The 0.034 pound (0.045 pound for track mount B) maximum weight, which the solids cannot show without material densities."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "16 pages, 3 scanned. SHA-256 3043aa4df5aa.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,206 of 2,278 items agreed. All 16 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "353 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 9 tables (558 cells), 7 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "41 solids in STEP AP242. 681 of 681 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Amendment 2 (all previous amendments incorporated), 19 November 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Track mount B: the .704 MAX extension line in Figure 1 runs to the dashed (engaged) cross pin rather than to the can top, so the can height is not separately dimensioned; the model takes .704 as the can height above the reference line.",
    "Model. Track mount B: Figure 1 gives no diameter for the knob or its post; the model uses .300, scaled from the figure."
   ]
  },
  {
   "id": "MIL-R-24039C",
   "slug": "mil-r-24039c",
   "title": "Racks and cylinders for mechanical dishwasing machines",
   "class": "Virginia",
   "folder": "Virginia/MIL-R-24039C Racks and cylinders for mechanical dishwasing ma",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 18,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "2 October 1981",
   "status": "Canceled, 16 May 1988",
   "newest": "Revision C Notice 1 - Cancellation, 16 May 1988",
   "superseding": "Cancellation Notice 1 for Superseding Information",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1,
    "Ohio": 1
   },
   "stock_examples": [
    "7320-00-918-8711, rack, commercial dishwashing mach, MIL-R-24039 (Virginia, Los Angeles, Ohio)"
   ],
   "files": {
    "package": "MIL-R-24039C package.pdf",
    "scan": "MIL-R-24039C legacy scan.pdf",
    "clean": "MIL-R-24039C clean copy.pdf",
    "record": "MIL-R-24039C validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, all scanned. SHA-256 56e2d5e102d9.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "6,097 of 6,126 items agreed. All 29 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "19 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 1 table (60 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-R-24039C is a performance and materials specification for dishwashing racks and flatware cylinders that gives only approximate overall rack sizes and capacities in its text, with no drawings or dimensioned part geometry.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 1 - Cancellation, 16 May 1988.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-R-8791D",
   "slug": "mil-r-8791d",
   "title": "Retainer, packing, hydraulic, and pneumatic, tetrafluoroethylene resin",
   "class": "Virginia",
   "folder": "Virginia/MIL-R-8791D Retainer, packing",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "1 FEBRUARY 1982",
   "status": "Canceled, 9 March 1998",
   "newest": "Revision D Notice 1 - Cancellation, 9 March 1998",
   "superseding": "SAE-AS8791",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5330-01-483-8077, retainer, packing, MIL-R-8791 (Los Angeles)",
    "5330-01-478-4878, retainer, packing, MIL-R-8791 (Seawolf)"
   ],
   "files": {
    "package": "MIL-R-8791D package.pdf",
    "scan": "MIL-R-8791D legacy scan.pdf",
    "clean": "MIL-R-8791D clean copy.pdf",
    "record": "MIL-R-8791D validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 e2814e3388a8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,059 of 2,076 items agreed. All 16 differences were settled against the page image. A second pass settled 1 from a closer look at the page.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 0 tables (0 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-R-8791 is a material, test and packaging specification for TFE packing retainers and points the shape and dimensions to MS27595, MS28773, MS28774, MS28782 and MS28783.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision D Notice 1 - Cancellation, 9 March 1998. ASSIST also holds Revision D Amendment 1 (21 February 1989). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-R-8791/1",
   "slug": "mil-r-8791-1",
   "title": "Retainer, packing, hydraulic and pneumatic, polytetrafluoroethylene resin, (single turn)",
   "class": "Virginia",
   "folder": "Virginia/MIL-R-8791_1 Retainer, packing",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 114,
   "dimensions": 1140,
   "dimensions_met": 1140,
   "kind": "Military specification sheet",
   "dated": "21 February 1989",
   "status": "Canceled, 9 March 1998",
   "newest": "Notice 1 - Cancellation, 9 March 1998",
   "superseding": "SAE-AS8791/1",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5331-01-721-6739, o-ring, M8791/1-236 (Virginia)"
   ],
   "files": {
    "package": "MIL-R-8791_1 package.pdf",
    "scan": "MIL-R-8791_1 legacy scan.pdf",
    "clean": "MIL-R-8791_1 clean copy.pdf",
    "record": "MIL-R-8791_1 validation record.pdf",
    "sheet": "MIL-R-8791_1 3D model.pdf",
    "parts": "MIL-R-8791_1 parts list.pdf",
    "inspection": "MIL-R-8791_1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M8791_1-212-freecad.png",
    "pair": "Models/views/M8791_1-212-pair.png",
    "record": "Models/views/M8791_1-212-record.png",
    "front": "Models/views/M8791_1-212-front.png",
    "top": "Models/views/M8791_1-212-top.png",
    "right": "Models/views/M8791_1-212-right.png",
    "cut": "Models/views/M8791_1-212-cut.png"
   },
   "shown_part": "M8791/1-212",
   "application": "FreeCAD 1.1.4",
   "modeled": "Single-turn scarf-cut PTFE packing retainers (backup rings), one solid for each of the 114 Table I dash numbers 004 to 437, with the scarf cut open at its mid-range gap.",
   "not_modeled": [
    "Edge condition (clean and sharp) and surface smoothness from requirement 1.",
    "Material, marking and the general requirements of MIL-R-8791.",
    "The \u00b15 degree tolerance on the cut ends and the optional opposite hand of the scarf cut; the solids use one hand with the ends exactly radial."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 5a0f5b0c9b98.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "886 of 900 items agreed. All 3 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "226 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 1 table (684 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "114 solids in STEP AP242. 1,140 of 1,140 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Notice 1 - Cancellation, 9 March 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-S-21472C",
   "slug": "mil-s-21472c",
   "title": "Screw, shoulder, hexagon socket-head and slotted-head general specification for",
   "class": "Virginia",
   "folder": "Virginia/MIL-S-21472C Screw, shoulder",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 15,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "31 October 1988",
   "status": "Canceled, 25 November 1998",
   "newest": "Revision C Notice 1 - Cancellation, 25 November 1998",
   "superseding": "NASM21472",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-S-21472C package.pdf",
    "scan": "MIL-S-21472C legacy scan.pdf",
    "clean": "MIL-S-21472C clean copy.pdf",
    "record": "MIL-S-21472C validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, all scanned. SHA-256 c5324614b55b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,213 of 3,359 items agreed. All 23 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "71 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 4 tables (197 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-S-21472C is a general specification for hexagon socket-head and slotted-head shoulder screws that sets materials, finishes, strength and test requirements and refers all dimensions to ANSI B18.6.3, ASME/ANSI B18.3 and the MS51575, MS51576 and MS51975 sheets, so it gives no part geometry to model.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 1 - Cancellation, 25 November 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-STD-12D",
   "slug": "mil-std-12d",
   "title": "Abbreviations for use on drawings, and in specifications, standards and technical documents",
   "class": "Virginia",
   "folder": "Virginia/MIL-STD-12D Abbreviations for use on drawings, and in specif",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 164,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military standard",
   "dated": "29 May 1981",
   "status": "Canceled, 25 September 1998",
   "newest": "Revision D Notice 1 - Cancellation, 25 September 1998",
   "superseding": "ASME-Y14.38M",
   "preparing_activity": "US Army Combat Capabilities Development Command, Armaments Center",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-STD-12D package.pdf",
    "scan": "MIL-STD-12D legacy scan.pdf",
    "clean": "MIL-STD-12D clean copy.pdf",
    "record": "MIL-STD-12D validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "164 pages, all scanned. SHA-256 7ef50cc31fd5.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "14,733 of 61,217 items agreed. All 274 differences were settled against the page image. A second pass settled 38 from a second printing in the document, 1 from a closer look at the page.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "43 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "513 pages of searchable text, 25 tables (58,993 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-STD-12D is a list of abbreviations for use on drawings and in specifications, standards and technical documents, and defines no part shape by dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision D Notice 1 - Cancellation, 25 September 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL\u2013R\u201383248C",
   "slug": "mil-r-83248c",
   "title": "Rubber, fluorocarbon elastomer, high temperature, fluid, and compression set resistant",
   "class": "Virginia",
   "folder": "Virginia/MIL\u2013R\u201383248C Rubber, fluorocarbon elastomer",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 20,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "28 June 1994",
   "status": "Canceled, 21 June 2001",
   "newest": "Revision C Notice 2 - Cancellation, 21 June 2001",
   "superseding": "SAE-AMS7276, SAE-AMS7259, SAE-AMS3216, AND SAE-AMS3218",
   "preparing_activity": "Air Force Life Cycle Management Center - Aircraft Systems",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 2,
    "Los Angeles": 2,
    "Seawolf": 1
   },
   "stock_examples": [
    "5331-01-148-2691, o-ring, MIL-R-83248 (Los Angeles, Virginia)",
    "5331-01-304-9500, o-ring, MIL-R-83248 TY 1 CL 2 (Virginia, Los Angeles, Seawolf)"
   ],
   "files": {
    "package": "MIL\u2013R\u201383248C package.pdf",
    "scan": "MIL\u2013R\u201383248C legacy scan.pdf",
    "clean": "MIL\u2013R\u201383248C clean copy.pdf",
    "record": "MIL\u2013R\u201383248C validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "20 pages, 0 scanned. SHA-256 3455eeed2a02.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,964 of 5,006 items agreed. All 8 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "43 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "16 pages of searchable text, 14 tables (420 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-R-83248C is a material specification for fluorocarbon rubber that defines physical properties, tests, sheet thickness tolerances and packaging, and leaves o-ring dimensions to MIL-R-83248/1 and /2 and molded and extruded part dimensions to the contract.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 2 - Cancellation, 21 June 2001.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS17346F",
   "slug": "ms17346f",
   "title": "Connector, receptacle, electrical, box mounting",
   "class": "Virginia",
   "folder": "Virginia/MS17346F Connector, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 24,
   "dimensions": 888,
   "dimensions_met": 888,
   "kind": "Detail specification sheet",
   "dated": "16 January 2013",
   "status": "Active, 2 October 2023",
   "newest": "Revision F Notice 2 - Validation, 2 October 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-516-5587, connector, receptacle, electrical, MS17346R28N22P (Virginia)"
   ],
   "files": {
    "package": "MS17346F package.pdf",
    "scan": "MS17346F legacy scan.pdf",
    "clean": "MS17346F clean copy.pdf",
    "record": "MS17346F validation record.pdf",
    "sheet": "MS17346F 3D model.pdf",
    "parts": "MS17346F parts list.pdf",
    "inspection": "MS17346F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS17346_size_22_S-freecad.png",
    "pair": "Models/views/MS17346_size_22_S-pair.png",
    "record": "Models/views/MS17346_size_22_S-record.png",
    "front": "Models/views/MS17346_size_22_S-front.png",
    "top": "Models/views/MS17346_size_22_S-top.png",
    "right": "Models/views/MS17346_size_22_S-right.png",
    "cut": "Models/views/MS17346_size_22_S-cut.png"
   },
   "shown_part": "MS17346 size 22 S",
   "application": "FreeCAD 1.1.4",
   "modeled": "24 envelope solids of the MS17346 box mounting receptacle, one for each shell size 12 to 44 with a pin insert (P) and with a socket insert (S): the front shell with the A coupling thread as a plain cylinder, the bore D with the AAA and four BBB keyways cut to YY, the shoulder at .797 +.062 -.000, the insert face at EEE or DDD, the square flange S from N to K with four T holes on the R square, and the rear shell KK to L.",
   "not_modeled": [
    "Insert arrangements, contacts, contact spacing, service ratings and alternate positions, which MIL-STD-1651 defines; each solid stands for every class (C, J, R), finish, insert arrangement and alternate position of its shell size and contact style.",
    "Z, the contact tails behind the flange (max, and min for size 0 contacts), and the .312 or .062 Z increase for size 0 contacts, since the solids carry no contacts; Z is recorded as a parameter.",
    "The groove and gasket drawn in front of the shoulder, the insert steps and retaining shoulder behind it, the cavity behind the insert where the contact tails leave the rear shell, and the rear end chamfer.",
    "The thread relief and fillet between the end of the A thread and the flange, the fillet between the flange and the rear shell, and the lead-in at the mouth of the bore.",
    "The .015 (TYP) (8 PLACES) callout at the flange edges, which the sheet does not explain.",
    "The stamped part number and manufacturer's identification bands (.062 wide, .031 from the edges), the thread form of the double start A thread, plating and finish."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 1 scanned. SHA-256 1026dbc11af3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "791 of 819 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "388 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 5 tables (468 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "24 solids in STEP AP242. 888 of 888 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 2 - Validation, 2 October 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 letters M (shell front face to flange front face) but no table gives M, and the page 4 table gives N (.797, .859, .922, +.010 -.000) but no view letters N; the solids take M as N, which leaves the flange .141 to .188 thick (K - N). N cannot be the printed .797 +.062 -.000 dimension, since .922 for sizes 32 to 44 lies outside it.",
    "Model. The sheet gives no insert diameter and no bore diameter behind the shoulder, so the annulus that takes the MS17344 plug shell is drawn at three quarters of D until MIL-DTL-22992 or MS17344 sizes it.",
    "Model. Page 3 prints one D value, 1.068, in a cell spanning shell sizes 20 and 22, while YY steps from 1.148 to 1.272, so the size 22 keyways are .102 deep against .040 on sizes 12 to 20 and .078 on 24 to 40; D for size 22 should be confirmed."
   ]
  },
  {
   "id": "MS17984F",
   "slug": "ms17984f",
   "title": "Pin, quick release, self-retaining, positive locking, single acting, button handle",
   "class": "Virginia",
   "folder": "Virginia/MS17984F Pin, quick release",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 6,
   "solids": 11,
   "dimensions": 132,
   "dimensions_met": 132,
   "kind": "Military specification sheet",
   "dated": "1 JUN 94",
   "status": "Canceled, 30 November 1998",
   "newest": "Revision F Notice 1 - Cancellation, 30 November 1998",
   "superseding": "NASM17984",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 8,
   "by_class": {
    "Virginia": 3,
    "Los Angeles": 3,
    "Seawolf": 4
   },
   "stock_examples": [
    "5315-00-007-6103, pin, quick release, MS17984-616 (Los Angeles, Virginia)",
    "5315-00-904-4785, pin, quick release, MS17984C619 (Los Angeles, Virginia)",
    "5315-01-510-9177, pin, quick release, MS17984C1450 (Virginia)",
    "5315-00-159-4610, pin, quick release, MS17984-311 (Los Angeles)"
   ],
   "files": {
    "package": "MS17984F package.pdf",
    "scan": "MS17984F legacy scan.pdf",
    "clean": "MS17984F clean copy.pdf",
    "record": "MS17984F validation record.pdf",
    "sheet": "MS17984F 3D model.pdf",
    "parts": "MS17984F parts list.pdf",
    "inspection": "MS17984F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS17984C810-freecad.png",
    "pair": "Models/views/MS17984C810-pair.png",
    "record": "Models/views/MS17984C810-record.png",
    "front": "Models/views/MS17984C810-front.png",
    "top": "Models/views/MS17984C810-top.png",
    "right": "Models/views/MS17984C810-right.png",
    "cut": "Models/views/MS17984C810-cut.png"
   },
   "shown_part": "MS17984C810",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the single acting button handle quick release pin for all 11 nominal diameters (3/16 to 1) at grip 1.000: shank with 30\u00b0 point, two locking balls, collar hub, handle disk and release button.",
   "not_modeled": [
    "Table II defines 1033 part numbers (grips .300 to 9.900); one representative grip (1.000) is modeled per diameter.",
    "Attaching ring or S link (\u00f8.100 MIN hole, .050 MIN wire) is not modeled; its shape is not dimensioned.",
    "Internal spindle, spring and locking mechanism, materials, heat treatment, finishes and double shear strength are not modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 7c398cc50c51.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,498 of 1,947 items agreed. 423 differences went to a third reader. A second pass settled 11 from the same value on another sheet of the series, 27 from a second printing in the document. 2 readings remain open.",
     "result": "2 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "140 checks on size series and limits. None failed. 1,316 values are also printed on 4 other sheets of the series: 1,315 match, 1 differs as printed. A later review settled 1 printed value from the other sheets of the series.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 3 tables (1,413 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "11 solids in STEP AP242. 132 of 132 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision F Notice 1 - Cancellation, 30 November 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table I, row 1/2, column \u2300E / MAX: read as 725, could be 705.",
    "Open reading. Table II, row 2 000, column DASH NUMBER / NOMINAL DIAMETER / 5/16: read as C520, could be C521.",
    "Model. The figure dimensions the shank point only by an angle, printed as 30 over 15 with the degree marks lost on this scan (MS17985 prints 30\u00b0 over 15\u00b0 at the same place), and the sheet gives no length or end diameter for the point. The solids use a 30\u00b0 chamfer .15 long, which leaves the 3/16 pin almost pointed; an engineer must confirm the angle limits and set the length of the point.",
    "Model. Table II prints dash number C1260 twice in the 3/4 column, at grip 6.000 on page 5 and again at grip 6.100 on page 6, where the part number rule on page 2 gives C1261; MS17985 and MS17987 print the same repeat. An engineer must confirm the dash number of the 3/4 pin at grip 6.100."
   ]
  },
  {
   "id": "MS17985G",
   "slug": "ms17985g",
   "title": "Pin, quick release, self-retaining, positive locking, single acting, \"T\" handle.",
   "class": "Virginia",
   "folder": "Virginia/MS17985G Pin, quick release",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 11,
   "dimensions": 143,
   "dimensions_met": 143,
   "kind": "Military specification sheet",
   "dated": "1 JUN 94",
   "status": "Canceled, 30 November 1998",
   "newest": "Revision G Notice 1 - Cancellation, 30 November 1998",
   "superseding": "NASM17985",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 11,
   "by_class": {
    "Virginia": 7,
    "Los Angeles": 1,
    "Ohio": 1,
    "Seawolf": 4
   },
   "stock_examples": [
    "5315-00-577-5507, pin, quick release, MS17985C422 (Virginia)",
    "5315-01-507-3534, pin, quick release, MS17985C641 (Virginia)",
    "5315-01-507-3536, pin, quick release, MS17985C1019 (Virginia)",
    "5315-01-507-3540, pin, quick release, MS17985C1633 (Virginia)"
   ],
   "files": {
    "package": "MS17985G package.pdf",
    "scan": "MS17985G legacy scan.pdf",
    "clean": "MS17985G clean copy.pdf",
    "record": "MS17985G validation record.pdf",
    "sheet": "MS17985G 3D model.pdf",
    "parts": "MS17985G parts list.pdf",
    "inspection": "MS17985G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS17985C810-freecad.png",
    "pair": "Models/views/MS17985C810-pair.png",
    "record": "Models/views/MS17985C810-record.png",
    "front": "Models/views/MS17985C810-front.png",
    "top": "Models/views/MS17985C810-top.png",
    "right": "Models/views/MS17985C810-right.png",
    "cut": "Models/views/MS17985C810-cut.png"
   },
   "shown_part": "MS17985C810",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MS17985 single acting T handle quick release pin, one per nominal diameter from 3/16 to 1 at the 1.000 grip (dash numbers C310 to C1610), with handle, release button, hub and collar, shank, two locking elements and end chamfer.",
   "not_modeled": [
    "Table II defines 1,029 dash numbers (grips .300 to 9.900); only the 1.000 grip of each of the 11 diameters is modeled, and the other grips differ only in shank length.",
    "Internal spindle, spring and locking-element pockets are not modeled; the pin is an outside envelope.",
    "The attaching ring or S link (.050 min wire) and its .100 min hole in the handle are not modeled.",
    "Double shear, tensile strength, recommended hole diameter, materials, heat treatment and surface treatment are recorded but not modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 0e4e287bb309.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,935 of 1,964 items agreed. All 31 differences were settled against the page image. A second pass settled 2 from a second printing in the document, 1 from a closer look at the page, 1 from the same value on another sheet of the series.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "432 checks on size series and limits. None failed. 1,326 values are also printed on 4 other sheets of the series: 1,323 match, 3 differ as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 3 tables (1,424 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "11 solids in STEP AP242. 143 of 143 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision G Notice 1 - Cancellation, 30 November 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Differs within the series. B, over locking elements (sheets printing the decimal point), 7/8: 1.046 here; MS17986 prints 1.045, MS17990 prints 1.045. MS17985 prints 1.046 on page 1, as MS17984 and MS17987 print 1 046; MS17986 and MS17990 print 1.045 clearly (crops 85-B-r9-11.png, 86-B-r9-11.png, 90-B-r9-11.png, m2-B-84-87.png).",
    "Differs within the series. Recommended hole diameter, minimum (sheets printing the decimal point), 9/16: .5625 here; MS17986 prints .5525, MS17990 prints .5525. MS17985 prints .5625 on page 1, as MS17984 and MS17987 print 5625; MS17986 and MS17990 print .5525 clearly (crops 85-hole-r6-8.png, 86-hole-r6-8.png, 90-hole-r6-8.png, m2-hole-84-87.png).",
    "Differs within the series. Grip length, rows of the 3/16 to 1/2 table (sheets printing the decimal point), C311: 1.100 here; MS17986 prints .. MS17985 prints 1.100 on page 3; MS17986 prints only a dot in the grip length cell of the C311 row, between 1.000 and 1.200, and MS17990 prints the same dot (transcribed there as an empty cell). Both pages are clear (crops 86-page 3-r7-12.png, 90-page 3-r7-12.png).",
    "Model. The figure dimensions the shank end chamfer only by an angle, printed as 30\u00b0 over 15\u00b0, and gives no chamfer length or end diameter. The solids use a 30\u00b0 chamfer cut to a depth of one eighth of the shank diameter; an engineer must confirm what the two angles limit and set the size of the chamfer.",
    "Model. Table II prints dash number C1260 twice in the 3/4 column, at grip 6.000 on page 5 and again at grip 6.100 on page 6, where the numbering rule on page 2 gives C1261; MS17984 and MS17987 print the same repeat, and revision F of this sheet printed C1261. An engineer must confirm the dash number of the 3/4 pin at grip 6.100."
   ]
  },
  {
   "id": "MS17987G",
   "slug": "ms17987g",
   "title": "Pin, quick release self-retaining positive locking single acting ring handle",
   "class": "Virginia",
   "folder": "Virginia/MS17987G Pin, quick release self-retaining positive locki",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 11,
   "dimensions": 143,
   "dimensions_met": 142,
   "kind": "Military specification sheet",
   "dated": "1 JUN 94",
   "status": "Canceled, 31 December 1998",
   "newest": "Revision G Notice 1 - Cancellation, 31 December 1998",
   "superseding": "NASM17987",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 6,
   "by_class": {
    "Virginia": 2,
    "Los Angeles": 2,
    "Ohio": 1,
    "Seawolf": 4
   },
   "stock_examples": [
    "5315-01-127-1650, pin, quick release, MS17987C1030 (Virginia, Los Angeles, Ohio, Seawolf)",
    "5315-01-507-4812, pin, quick release, MS17987C679 (Virginia)",
    "5315-01-493-6036, pin, quick release, MS17987C1070 (Los Angeles)",
    "5315-00-051-1407, pin, quick release, MS17987-810 (Seawolf)"
   ],
   "files": {
    "package": "MS17987G package.pdf",
    "scan": "MS17987G legacy scan.pdf",
    "clean": "MS17987G clean copy.pdf",
    "record": "MS17987G validation record.pdf",
    "sheet": "MS17987G 3D model.pdf",
    "parts": "MS17987G parts list.pdf",
    "inspection": "MS17987G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS17987C810-freecad.png",
    "pair": "Models/views/MS17987C810-pair.png",
    "record": "Models/views/MS17987C810-record.png",
    "front": "Models/views/MS17987C810-front.png",
    "top": "Models/views/MS17987C810-top.png",
    "right": "Models/views/MS17987C810-right.png",
    "cut": "Models/views/MS17987C810-cut.png"
   },
   "shown_part": "MS17987C810",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the ring-handle quick release pin for all 11 nominal diameters (3/16 to 1) at grip 1.000: shank with 30\u00b0 point, two locking balls, handle, release button and handle ring.",
   "not_modeled": [
    "Table II defines 1029 part numbers (grips .300 to 9.900); one representative grip (1.000) is modeled per diameter.",
    "Attaching link or ring (\u00f8.180 MIN, .050 MIN) and the optional collar are not modeled; their shapes are not dimensioned.",
    "Internal spindle, spring and locking mechanism, materials, heat treatment, finishes, shear and tensile strength and the recommended hole diameter are not modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 320da31a0f48.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,103 of 1,446 items agreed. All 43 differences were settled against the page image. A second pass settled 4 from a closer look at the page, 3 from a second printing in the document, 20 from the same value on another sheet of the series.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "145 checks on size series and limits. None failed. 1,320 values are also printed on 4 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 3 tables (1,424 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "11 solids in STEP AP242. 142 of 143 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision G Notice 1 - Cancellation, 31 December 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table I gives G MAX as .450 for the 3/16 pin, which is less than H MIN .730 plus the .490 minimum from the handle ring to the button end (1.220); every other size has G MAX of 1.500 or more. The cell is clear on the scan and nothing stands where a leading 1 would be. An engineer must decide whether 1.450 is meant.",
    "Model. Table II prints dash number C1260 twice in the 3/4 column, at grip 6.000 on page 5 and at grip 6.100 on page 6, where the numbering rule (shank diameter in sixteenths, grip in tenths) gives C1261. MS17984 and MS17985 print the same. An engineer must confirm that the 6.100 grip is C1261.",
    "Model. The figure gives two angles for the shank point, 30\u00b0 over 15\u00b0, and no length or end diameter for it. The solids use 30\u00b0 over a length of .15 along the axis; an engineer must confirm what the two angles limit and how long the point is."
   ]
  },
  {
   "id": "MS21437J",
   "slug": "ms21437j",
   "title": "Switch, toggle, positive break, lever lock, miniature, toggle sealed, solder lug, double pole, .469 mounting bushing",
   "class": "Virginia",
   "folder": "Virginia/MS21437J Switch, toggle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 50,
   "dimensions": 1258,
   "dimensions_met": 1258,
   "kind": "Detail specification sheet",
   "dated": "8 November 2022",
   "status": "Active, 8 November 2022",
   "newest": "Revision J, 8 November 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5930-01-497-6155, switch, toggle, MS21437-E731 (Virginia)"
   ],
   "files": {
    "package": "MS21437J package.pdf",
    "scan": "MS21437J legacy scan.pdf",
    "clean": "MS21437J clean copy.pdf",
    "record": "MS21437J validation record.pdf",
    "sheet": "MS21437J 3D model.pdf",
    "parts": "MS21437J parts list.pdf",
    "inspection": "MS21437J inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS21437-C721-freecad.png",
    "pair": "Models/views/MS21437-C721-pair.png",
    "record": "Models/views/MS21437-C721-record.png",
    "front": "Models/views/MS21437-C721-front.png",
    "top": "Models/views/MS21437-C721-top.png",
    "right": "Models/views/MS21437-C721-right.png",
    "cut": "Models/views/MS21437-C721-cut.png"
   },
   "shown_part": "MS21437-C721",
   "application": "FreeCAD 1.1.4",
   "modeled": "Fifty envelope solids, one per part number (every Table I dash number in each locking configuration letter it is available in), of the Figure 1 outline: the lever lock toggle lever within its .430 maximum diameter, the .469-32 bushing with its keyway, the case at its .556 by .585 maximum section and the six solder lug terminals, with the lever centered except on the -721, -731, -221 and -231 switches, which have no center position and show it thrown to the keyway side.",
   "not_modeled": [
    "The lever's own shape inside its .430 diameter envelope, the lever lock mechanism and the locking configurations of Figure 2, which the sheet shows for illustration of operating characteristics only; the unlocked (pulled) lever length is not given.",
    "Lever travel: the 28\u00b0 \u00b110\u00b0 throw between the extreme positions and the other lever positions; each solid holds the lever in one position only.",
    "Thread form of the .469-32 UNS-2A bushing, the .438 \u00b1.025 thread length and the .030 minimum unthreaded length when mounting, which a plain cylinder does not separate.",
    "The mounting hardware drawn on the figure (two .469-32 UNS-2B hex mounting nuts, the .469 lockwasher and the .469 locking ring), which MIL-DTL-8834 dimensions in its appendix.",
    "The bushing end chamfer, toggle seal and internal switching mechanism, none of which is dimensioned.",
    "Case corner contour, the terminal barrier and the lug outline beyond thickness, spacing and hole, which note 3 makes optional, and the terminal marking.",
    "Circuit arrangement, unlocking force, the .066 lb weight limit, ratings, seal tests and the other performance requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 1 scanned. SHA-256 608eeee2e2d1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "699 of 704 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "20 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 1 table (66 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "50 solids in STEP AP242. 1,258 of 1,258 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J, 8 November 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 draws the .072 \u00b1.005 extension lines down past the locking ring's outer tab, which MIL-DTL-8834 makes .110 wide, so the solids take .072 \u00b1.005 as the bushing keyway width that holds the ring's .062 key; the engineer should confirm that the .072 dimensions the keyway."
   ]
  },
  {
   "id": "MS24667D",
   "slug": "ms24667d",
   "title": "Screw, cap, socket head, flat countersunk, 82\u00b0, alloy steel, UNC-3A",
   "class": "Virginia",
   "folder": "Virginia/MS24667D Screw, cap",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 90,
   "dimensions": 810,
   "dimensions_met": 810,
   "kind": "Military specification sheet",
   "dated": "30 APR 94",
   "status": "Canceled, 30 June 1998",
   "newest": "Revision D Notice 1 - Cancellation, 30 June 1998",
   "superseding": "NASM24667",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5305-01-716-3632, screw, cap, socket head, MS24667-34B (Virginia)"
   ],
   "files": {
    "package": "MS24667D package.pdf",
    "scan": "MS24667D legacy scan.pdf",
    "clean": "MS24667D clean copy.pdf",
    "record": "MS24667D validation record.pdf",
    "sheet": "MS24667D 3D model.pdf",
    "parts": "MS24667D parts list.pdf",
    "inspection": "MS24667D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS24667-52-freecad.png",
    "pair": "Models/views/MS24667-52-pair.png",
    "record": "Models/views/MS24667-52-record.png",
    "front": "Models/views/MS24667-52-front.png",
    "top": "Models/views/MS24667-52-top.png",
    "right": "Models/views/MS24667-52-right.png",
    "cut": "Models/views/MS24667-52-cut.png"
   },
   "shown_part": "MS24667-52",
   "application": "FreeCAD 1.1.4",
   "modeled": "90 solids, one per Table I dash number MS24667-1 to -100: an 82 deg flat countersunk head with a flat edge margin and a hexagon socket on a plain cylindrical shank at the body diameter, overall length L at mid-tolerance.",
   "not_modeled": [
    "Threads (UNC-3A) and the thread run-out: the shank is one plain cylinder, so grip length and body length are not separate features.",
    "The self-locking patch or strip (code L) and its X and Y zone, which MS15981 defines.",
    "Finish codes Z and cadmium plate, tensile strength, hardness, and the manufacturer's head marking.",
    "The point chamfer shown on the drawing, which carries no dimension."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 3524f5ed1812.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "612 of 624 items agreed. All 15 differences were settled against the page image. A second pass settled 1 from a second printing in the document.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "353 checks on size series and limits. 27 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (388 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "90 solids in STEP AP242. 810 of 810 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision D Notice 1 - Cancellation, 30 June 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS24678E",
   "slug": "ms24678e",
   "title": "Screw, cap, socket head, hexagon, drilled alloy steel, (UNF-3A)",
   "class": "Virginia",
   "folder": "Virginia/MS24678E Screw, cap",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 70,
   "dimensions": 1190,
   "dimensions_met": 1190,
   "kind": "Military specification sheet",
   "dated": "2 JAN 92",
   "status": "Canceled, 25 November 1998",
   "newest": "Revision E Notice 1 - Cancellation, 25 November 1998",
   "superseding": "NASM24678",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1
   },
   "stock_examples": [
    "5305-00-058-2072, screw, cap, socket head, MS24678-2 (Los Angeles, Virginia)"
   ],
   "files": {
    "package": "MS24678E package.pdf",
    "scan": "MS24678E legacy scan.pdf",
    "clean": "MS24678E clean copy.pdf",
    "record": "MS24678E validation record.pdf",
    "sheet": "MS24678E 3D model.pdf",
    "parts": "MS24678E parts list.pdf",
    "inspection": "MS24678E inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS24678-35-freecad.png",
    "pair": "Models/views/MS24678-35-pair.png",
    "record": "Models/views/MS24678-35-record.png",
    "front": "Models/views/MS24678-35-front.png",
    "top": "Models/views/MS24678-35-top.png",
    "right": "Models/views/MS24678-35-right.png",
    "cut": "Models/views/MS24678-35-cut.png"
   },
   "shown_part": "MS24678-35",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid socket head cap screws with a drilled head for every dash number MS24678-1 to -70 (sizes #6 to 5/8), with head, hexagon socket, socket bottom cone, under-head fillet and chamfer, drilled lockwire holes and a plain shank.",
   "not_modeled": [
    "Screw threads (UNF-3A per FED-STD-H28/2): the shank is a plain cylinder at the body diameter D.",
    "Grip length LG and body length LB for the long dash numbers, and thread run-out within two threads of the head (Req 5).",
    "The 45 degree by .010 to .020 chamfer on the outside edges of the drilled holes (Req 7c).",
    "Head top edge chamfer at 30 to 45 degrees, whose size the document does not give.",
    "Optional head knurling (Req 6), source marking (Req 12), material, hardness, coating and tensile strength."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, all scanned. SHA-256 91ed2ca80db1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "748 of 769 items agreed. All 24 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "229 checks on size series and limits. 8 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 6 tables (708 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "70 solids in STEP AP242. 1,190 of 1,190 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 1 - Cancellation, 25 November 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS29513",
   "slug": "ms29513",
   "title": "Packing, preformed, hydrocarbon fuel resistant, \"O\" ring",
   "class": "Virginia",
   "folder": "Virginia/MS29513 Packing, preformed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 316,
   "dimensions": 1896,
   "dimensions_met": 1896,
   "kind": "Military standard",
   "dated": "16 Sep 66",
   "status": "Canceled, 1 March 2001",
   "newest": "Revision C Notice 3 - Cancellation, 1 March 2001",
   "superseding": "SAE-AS29513",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 3,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 3
   },
   "stock_examples": [
    "5331-00-297-9788, o-ring, MS29513-432 (Los Angeles, Virginia)",
    "5331-00-185-0596, o-ring, MS29513-278 (Los Angeles)",
    "5331-00-265-1077, o-ring, MS29513-220 (Los Angeles)"
   ],
   "files": {
    "package": "MS29513 package.pdf",
    "scan": "MS29513 legacy scan.pdf",
    "clean": "MS29513 clean copy.pdf",
    "record": "MS29513 validation record.pdf",
    "sheet": "MS29513 3D model.pdf",
    "parts": "MS29513 parts list.pdf",
    "inspection": "MS29513 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS29513-249-freecad.png",
    "pair": "Models/views/MS29513-249-pair.png",
    "record": "Models/views/MS29513-249-record.png",
    "front": "Models/views/MS29513-249-front.png",
    "top": "Models/views/MS29513-249-top.png",
    "right": "Models/views/MS29513-249-right.png",
    "cut": "Models/views/MS29513-249-cut.png"
   },
   "shown_part": "MS29513-249",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid tori, one for each of the 316 MS29513 ring sizes 001-050, 110-178, 210-284, 325-395 and 425-475, with a round cross section of diameter W on an inside diameter ID, both at the nominal table value.",
   "not_modeled": [
    "The rubber compound and its fuel resistance, which the procurement specification MIL-P-5315 defines.",
    "Tolerances are recorded as parameters and checks; the solids are nominal only, not limit-of-size variants."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 ec10d1d5ba40.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,585 of 1,845 items agreed. All 209 differences were settled against the page image. A second pass settled 2 from a second printing in the document, 1 from a closer look at the page, 10 from the same value on another sheet of the series, 1 from the document's record in ASSIST. 3 marks outside the technical content are kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "918 checks on size series and limits. 1 break checked against the scan: it is as printed. 1,263 values are also printed on 3 other sheets of the series: 1,261 match, 2 differ as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 8 tables (1,580 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "316 solids in STEP AP242. 1,896 of 1,896 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 3 - Cancellation, 1 March 2001.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Differs within the series. ID, inside diameter, tolerance, 377: \u00b1.030 here; MS28775 prints \u00b1.0305. Follows from the MS28775 limits 9.945 to 10.006 printed for -377 (half range .0305); MS29513 prints \u00b1.030.",
    "Differs within the series. ID, inside diameter, tolerance, 379: \u00b1.030 here; MS28775 prints \u00b1.0305. Follows from the MS28775 limits 10.945 to 11.006 printed for -379 (half range .0305); MS29513 prints \u00b1.030."
   ]
  },
  {
   "id": "MS3181G w/AMENDMENT 1",
   "slug": "ms3181g-w-amendment-1",
   "title": "Connectors, electrical circular, cover, protective, receptacle, MIL-DTL-26482 series 1 and 2, bayonet coupling",
   "class": "Virginia",
   "folder": "Virginia/MS3181G w_AMENDMENT 1 Connectors, electrical circular",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 54,
   "dimensions": 1584,
   "dimensions_met": 1584,
   "kind": "Detail specification sheet",
   "dated": "30 August 2013",
   "status": "Active, 15 May 2019",
   "newest": "Revision G Notice 1 - Validation, 15 May 2019",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-00-778-4917, cover, electrical connector, MS3181-18N (Los Angeles, Virginia)"
   ],
   "files": {
    "package": "MS3181G w_AMENDMENT 1 package.pdf",
    "scan": "MS3181G w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MS3181G w_AMENDMENT 1 clean copy.pdf",
    "record": "MS3181G w_AMENDMENT 1 validation record.pdf",
    "sheet": "MS3181G w_AMENDMENT 1 3D model.pdf",
    "parts": "MS3181G w_AMENDMENT 1 parts list.pdf",
    "inspection": "MS3181G w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS3181-16N_-freecad.png",
    "pair": "Models/views/MS3181-16N_-pair.png",
    "record": "Models/views/MS3181-16N_-record.png",
    "front": "Models/views/MS3181-16N_-front.png",
    "top": "Models/views/MS3181-16N_-top.png",
    "right": "Models/views/MS3181-16N_-right.png",
    "cut": "Models/views/MS3181-16N_-cut.png"
   },
   "shown_part": "MS3181-16N*",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the 54 MS3181 receptacle protective cover configurations, one per shell size 8 to 24 with chain (C), chain and angled ring (N) or rope (R), each at the standard length H and with the L option 5.000 inch length: the cover at Q over L with the A bore, three bayonet grooves at C and G locking at B, three inspection holes, the disk face at J, the .047 boss, the fastener head to X, and the chain or rope to the .167 clearance hole or to the ring at K, N and E.",
   "not_modeled": [
    "The cam (ramp) profile of the bayonet grooves and the coupling rotation, which follow the MIL-DTL-26482 intermateability dimensions (note 4); the grooves are drawn as plain axial-then-circumferential slots.",
    "The disk (gasket) as a separate silicone part; the solid ends the bore at the disk face and merges the disk into the closed end.",
    "The elongated Detail C inspection slot; the holes follow the alternate round hole design at R .047.",
    "The flutes or knurl, the step between the front sleeve and the coupling end, the optional marking location, edge breaks and the finish.",
    "The real chain links and 7 strand rope, their free rotation on the fastener, the domed fastener heads and the triangular chain link on the style N ring; chain and rope are the same flat strap, so style C and style R solids share one shape.",
    "The finish letter of the part number (A, L, D, T, W or K), which does not change geometry; one solid stands for every finish."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 c559dfcae638.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "754 of 769 items agreed. All 17 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "16 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (126 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "54 solids in STEP AP242. 1,584 of 1,584 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Notice 1 - Validation, 15 May 2019.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. C for shell sizes 20 and 22 is printed as .089/.153 without saying which grooves take each width; the solids cut one groove at .153 and two at .089.",
    "Model. K for shell size 8 is printed .812 (22.62), but 22.62 mm is .891 inch; the solids use the inch value .812."
   ]
  },
  {
   "id": "MS3401(NAVY)",
   "slug": "ms3401-navy",
   "title": "Connectors, receptacle, electric, cable connecting, front release, crimp contact, AN type",
   "class": "Virginia",
   "folder": "Virginia/MS3401(NAVY) Connectors, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 110,
   "dimensions": 900,
   "dimensions_met": 900,
   "kind": "Military standard",
   "dated": "9 April 1979",
   "status": "Canceled, 23 December 2009",
   "newest": "Revision G Notice 3 - Cancellation, 23 December 2009",
   "superseding": "SAE-AS34011",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 27,
   "by_class": {
    "Virginia": 10,
    "Los Angeles": 1,
    "Ohio": 13,
    "Seawolf": 3
   },
   "stock_examples": [
    "5935-01-514-8774, connector, receptacle, electrical, MS3401 (Virginia)",
    "5935-01-514-8783, connector body, receptacle, electr, MS3401 (Virginia)",
    "5935-01-514-8784, connector, receptacle, electrical, MS3401 (Virginia)",
    "5935-01-514-8786, connector, receptacle, electrical, MS3401 (Virginia)"
   ],
   "files": {
    "package": "MS3401(NAVY) package.pdf",
    "scan": "MS3401(NAVY) legacy scan.pdf",
    "clean": "MS3401(NAVY) clean copy.pdf",
    "record": "MS3401(NAVY) validation record.pdf",
    "sheet": "MS3401(NAVY) 3D model.pdf",
    "parts": "MS3401(NAVY) parts list.pdf",
    "inspection": "MS3401(NAVY) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 3",
   "pictures": {
    "iso": "Models/views/MS3401DJ_10AXX-freecad.png",
    "pair": "Models/views/MS3401DJ_10AXX-pair.png",
    "record": "Models/views/MS3401DJ_10AXX-record.png",
    "front": "Models/views/MS3401DJ_10AXX-front.png",
    "top": "Models/views/MS3401DJ_10AXX-top.png",
    "right": "Models/views/MS3401DJ_10AXX-right.png",
    "cut": "Models/views/MS3401DJ_10AXX-cut.png"
   },
   "shown_part": "MS3401DJ 10AXX",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 19 class D receptacle shell sizes (with the longer size 8, 4 and 0 contact length where the table gives one) and of the 80 class DJ receptacle and MS3437B backshell assemblies, each with front shell N, round flange S with flats R, and for class DJ the coupling thread B and a cable clamp of outside size E with cable entry A.",
   "not_modeled": [
    "Insert arrangements, contacts, polarizing key and alternate key positions, which MIL-STD-1651 and MIL-C-5015 define.",
    "Front and rear end configuration details, which the procurement specification defines.",
    "Class DJ assemblies with size 8, 4 and 0 contacts (note 3, add .375 to overall length); every assembly is modeled with size 16 and 12 contacts.",
    "The MS3437B backshell coupling nut, saddle bar and screws, whose dimensions are in MS3437.",
    "Classes L, U and W, which share the class D dimensions and are inactive for design."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 735b4192f776.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "932 of 1,442 items agreed. All 55 differences were settled against the page image. A second pass settled 1 from a closer look at the page, 6 from a second printing in the document, 8 from the same value on another sheet of the series.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "350 checks on size series and limits. 5 breaks checked against the scan: all are as printed. 623 values are also printed on 9 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 3 tables (986 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "110 solids in STEP AP242. 900 of 900 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision G Notice 3 - Cancellation, 23 December 2009.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. The class DJ assembly table on page 4 prints R as .525 for MS3401DJ 10DXX. The same MS3401D-10S receptacle has R .625 in rows 10AXX and 10BXX and .629/.621 in the table on page 2, so .525 looks like a drafting error for .625.",
    "Model. The width across the flange flats, R, is about the same as the front shell diameter, N, at every shell size (size 8S: R .496 to .504, N .470 to .532), so at the larger N the flats would cut into the shell. The figure on page 1 does not show how the flats meet the shell; an engineer must confirm whether the flats stop at the flange, as modeled, or run through the shell.",
    "Model. Assembly MS3401DJ 10DXX is modeled with flange flats R .525, as the table on page 4 prints it. Page 2 gives the MS3401D-10S receptacle in that assembly R .621 to .629, and rows 10AXX and 10BXX give .625; an engineer must decide which value governs."
   ]
  },
  {
   "id": "MS3402G",
   "slug": "ms3402g",
   "title": "Connector, receptacle, electric, box mounting, front release, crimp contact, AN type with",
   "class": "Virginia",
   "folder": "Virginia/MS3402G Connector, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 30,
   "dimensions": 420,
   "dimensions_met": 420,
   "kind": "Military specification sheet",
   "dated": "15 FEB 93",
   "status": "Canceled, 23 December 2009",
   "newest": "Revision G Notice 3 - Cancellation, 23 December 2009",
   "superseding": "SAE-AS34021",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 37,
   "by_class": {
    "Virginia": 6,
    "Los Angeles": 14,
    "Ohio": 10,
    "Seawolf": 13
   },
   "stock_examples": [
    "5935-01-513-2447, connector, receptacle, electrical, MS3402D36-5SY (Virginia)",
    "5935-01-513-2452, connector, receptacle, electrical, MS3402D36-5SX (Virginia)",
    "5935-01-513-3848, connector, receptacle, electrical, MS3402D44-52DX (Virginia)",
    "5935-01-515-0210, connector, receptacle, electrical, MS3402D12S-3PW (Virginia)"
   ],
   "files": {
    "package": "MS3402G package.pdf",
    "scan": "MS3402G legacy scan.pdf",
    "clean": "MS3402G clean copy.pdf",
    "record": "MS3402G validation record.pdf",
    "sheet": "MS3402G 3D model.pdf",
    "parts": "MS3402G parts list.pdf",
    "inspection": "MS3402G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS3402_20_L2-freecad.png",
    "pair": "Models/views/MS3402_20_L2-pair.png",
    "record": "Models/views/MS3402_20_L2-record.png",
    "front": "Models/views/MS3402_20_L2-front.png",
    "top": "Models/views/MS3402_20_L2-top.png",
    "right": "Models/views/MS3402_20_L2-right.png",
    "cut": "Models/views/MS3402_20_L2-cut.png"
   },
   "shown_part": "MS3402 20 L2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MS3402 box-mounting receptacle shell for all 19 shell sizes, each at its L MAX for size 16 and 12 contacts (L1) and, for sizes 16 to 48, for size 8, 4 and 0 contacts (L2): front shell diameter N over length M, square flange S by K with four T holes on R centers, and rear body GG to L MAX with the rear chamfer.",
   "not_modeled": [
    "Insert arrangement, contacts and insulator (MIL-STD-1651, MIL-C-5015) and the shell bore; the solids are full envelopes.",
    "Front end configuration (coupling thread, polarizing key and keyway), which the sheet refers to the acquisition specification.",
    "Dimension O, which Table I heads (REF) MTG HOLES: a reference dimension for the mounting hole, drawn on the side view just outside shell diameter N. It carries no tolerance and is recorded as a parameter only.",
    "Flange corner radii and the grooves drawn on the shell, which the sheet does not dimension.",
    "Class, material and alternate insert position variants, which do not change the dimensioned envelope."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 c258b3c99921.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "504 of 513 items agreed. All 11 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "184 checks on size series and limits. 2 breaks checked against the scan: all are as printed. 187 values are also printed on 9 other sheets of the series: 184 match, 3 differ as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (209 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "30 solids in STEP AP242. 420 of 420 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision G Notice 3 - Cancellation, 23 December 2009.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Differs within the series. S, flange, beside the receptacle number, 16S: 1.281 here; MS3400 prints 1.284. MS3400 page 4 prints 1.284 clearly in the S column of all four rows on MS3400D-16S-XX (17AXX to 17EXX); MS3402 page 2 prints 1.281 clearly for size 16S, and MS3400's own page 2 table prints 1.281 for 16S.",
    "Differs within the series. S, flange, beside the receptacle number, 16: 1.281 here; MS3400 prints 1.284. MS3400 page 4 prints 1.284 clearly in the S column of all four rows on MS3400D-16-XX (16AXX to 16EXX); MS3402 page 2 prints 1.281 clearly for size 16, and MS3400's own page 2 table prints 1.281 for 16.",
    "Differs within the series. T, mounting hole, beside the receptacle number, 14: .120 here; MS3400 prints .120(G). Both sheets print .120 for size 14. The cell on MS3400 page 4 (row 14EXX) also carries the circled G revision mark printed in the right margin beside that row, which the reading rules keep in the cell; MS3402 prints no mark there.",
    "Model. Table I prints the tolerance on GG as \u00b10.16 and on K as \u00b10.15, but \u00b10.15 is larger than every K value in the table (.083 and .125), sheets MS3401 and MS3451 give the same K values with \u00b1.015, and note 2 sets the general tolerance at \u00b1.016. The engineer must decide whether \u00b1.016 and \u00b1.015 were intended; the model checks use the tolerances as printed."
   ]
  },
  {
   "id": "MS3408(NAVY)",
   "slug": "ms3408-navy",
   "title": "Connectors, plug, electric, 90\u00b0 assembly, crimp contact, AN type",
   "class": "Virginia",
   "folder": "Virginia/MS3408(NAVY) Connectors, plug",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 6,
   "solids": 132,
   "dimensions": 924,
   "dimensions_met": 924,
   "kind": "Military standard",
   "dated": "9 April 1979",
   "status": "Canceled, 23 December 2009",
   "newest": "Revision D Notice 1 - Cancellation, 23 December 2009",
   "superseding": "SAE-AS34081",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 46,
   "by_class": {
    "Virginia": 15,
    "Los Angeles": 8,
    "Ohio": 20,
    "Seawolf": 3
   },
   "stock_examples": [
    "5935-01-511-6350, connector, plug, electrical, MS3408DJ18A-10D (Virginia)",
    "5935-01-514-8465, connector, plug, electrical, MS3408DJ32B17SW (Virginia)",
    "5935-01-514-8477, connector, plug, electrical, MS3408DJ44A52P (Virginia)",
    "5935-01-514-8821, connector, plug, electrical, MS3408 (Virginia)"
   ],
   "files": {
    "package": "MS3408(NAVY) package.pdf",
    "scan": "MS3408(NAVY) legacy scan.pdf",
    "clean": "MS3408(NAVY) clean copy.pdf",
    "record": "MS3408(NAVY) validation record.pdf",
    "sheet": "MS3408(NAVY) 3D model.pdf",
    "parts": "MS3408(NAVY) parts list.pdf",
    "inspection": "MS3408(NAVY) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 3",
   "pictures": {
    "iso": "Models/views/MS3408DJ_22AXX-freecad.png",
    "pair": "Models/views/MS3408DJ_22AXX-pair.png",
    "record": "Models/views/MS3408DJ_22AXX-record.png",
    "front": "Models/views/MS3408DJ_22AXX-front.png",
    "top": "Models/views/MS3408DJ_22AXX-top.png",
    "right": "Models/views/MS3408DJ_22AXX-right.png",
    "cut": "Models/views/MS3408DJ_22AXX-cut.png"
   },
   "shown_part": "MS3408DJ 22AXX",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of every MS3408DJ 90 degree assembly in the page 4-5 table (MS3406D plug with MS3188B elbow backshell and clamp), plus the note 3 long version (L and Q plus .375) for shell sizes 16 and up that take size 8, 4 and 0 contacts.",
   "not_modeled": [
    "Class D and L assemblies of pages 1 and 2: the sheet gives only overall length L by shell size and no diameters or elbow dimensions.",
    "Insert arrangements, contacts, grommets and the connector front and rear configuration, which MIL-STD-1651 and MIL-C-5015 define.",
    "Internal cavities of the plug and backshell; the solids are envelopes with only the coupling thread bore and the cable entry hole cut.",
    "Clamp screws, saddle bars and the clamp's rounded ends.",
    "Material and finish options (aluminum or S stainless steel) and alternate insert positions W, X, Y, Z, which do not change the envelope."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 5223575587b3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "905 of 1,312 items agreed. 25 differences went to a third reader. A second pass settled 3 from a second printing in the document, 6 from a closer look at the page, 6 from the same value on another sheet of the series. 3 readings remain open. 1 mark outside the technical content is kept as transcription notes.",
     "result": "3 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "286 checks on size series and limits. 15 breaks checked against the scan: all are as printed. 510 values are also printed on 9 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 3 tables (960 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "132 solids in STEP AP242. 924 of 924 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision D Notice 1 - Cancellation, 23 December 2009.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 4, row 63 (MS3408DJ 36EXX) of the table continued on page 5, column 11 (Q / MAX.): read as 3.688, could be 3.562.",
    "Open reading. Page 4, row 64 (MS3408DJ 36FXX) of the table continued on page 5, column 11 (Q / MAX.): read as 3.688, could be 3.638 or 3.634.",
    "Open reading. Page 4, row 78 (MS3408DJ 48DXX) of the table continued on page 5, column 11 (Q / MAX.): read as 4.938, could be 4.438 (the 4 and the 9 print alike on page 5; confirm Q for 48AXX, 48BXX and 48EXX as well)."
   ]
  },
  {
   "id": "MS3409(NAVY)",
   "slug": "ms3409-navy",
   "title": "Connectors, plug, electric, 45\u00b0 assembly, crimp contact, AN type",
   "class": "Virginia",
   "folder": "Virginia/MS3409(NAVY) Connectors, plug",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 98,
   "dimensions": 746,
   "dimensions_met": 746,
   "kind": "Military standard",
   "dated": "9 April 1979",
   "status": "Canceled, 23 December 2009",
   "newest": "Revision B Notice 2 - Cancellation, 23 December 2009",
   "superseding": "SAE-AS34091",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 108,
   "by_class": {
    "Virginia": 31,
    "Los Angeles": 27,
    "Ohio": 34,
    "Seawolf": 16
   },
   "stock_examples": [
    "5935-01-508-8278, connector, plug, electrical, MS3409DJ15A-7PW (Virginia)",
    "5935-01-514-7934, connector, plug, electrical, MS3409DJ20A27S (Virginia)",
    "5935-01-514-7938, connector, plug, electrical, MS3409DJ40B56E (Virginia)",
    "5935-01-514-7943, connector, plug, electrical, MS3409DJ44B52E (Virginia)"
   ],
   "files": {
    "package": "MS3409(NAVY) package.pdf",
    "scan": "MS3409(NAVY) legacy scan.pdf",
    "clean": "MS3409(NAVY) clean copy.pdf",
    "record": "MS3409(NAVY) validation record.pdf",
    "sheet": "MS3409(NAVY) 3D model.pdf",
    "parts": "MS3409(NAVY) parts list.pdf",
    "inspection": "MS3409(NAVY) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 3",
   "pictures": {
    "iso": "Models/views/MS3409DJ_10AXX-freecad.png",
    "pair": "Models/views/MS3409DJ_10AXX-pair.png",
    "record": "Models/views/MS3409DJ_10AXX-record.png",
    "front": "Models/views/MS3409DJ_10AXX-front.png",
    "top": "Models/views/MS3409DJ_10AXX-top.png",
    "right": "Models/views/MS3409DJ_10AXX-right.png",
    "cut": "Models/views/MS3409DJ_10AXX-cut.png"
   },
   "shown_part": "MS3409DJ 10AXX",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of every MS3409 45 degree plug assembly: 19 class D shell sizes (MS3406D plug with MS3415 backshell) and 79 class DJ dash numbers (MS3406D plug with MS3189B backshell and cable clamp), each with its coupling nut, thread bore, 45 degree outlet and cable entry opening.",
   "not_modeled": [
    "Insert arrangements (MIL-STD-1651), contacts, seals, grommets and the connector front and rear end details, which the procurement specification defines.",
    "The .375 added to overall length for size 8, 4 and 0 contacts (note 3); every solid is at the standard length.",
    "Coupling thread form, nut knurling, clamp screws and saddle bars, and the internal shape of the backshells.",
    "Material designator S (stainless steel) versus aluminum alloy, and alternate insert positions W, X, Y and Z, which do not change the envelope."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 fc30eaa26286.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "973 of 1,448 items agreed. All 47 differences were settled against the page image. A second pass settled 3 from a second printing in the document, 8 from a closer look at the page, 1 from the same value on another sheet of the series.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "344 checks on size series and limits. 12 breaks checked against the scan: all are as printed. 432 values are also printed on 9 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 3 tables (1,074 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "98 solids in STEP AP242. 746 of 746 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 2 - Cancellation, 23 December 2009.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. In the class DJ table on page 5, row 40FXX prints Q max 3.125 where the other four shell size 40 rows print 3.875. The same row prints L max 7.188, which is .750 more than the 6.438 of row 36FXX and fits a Q of 3.875, not 3.125.",
    "Model. MS3409DJ 40FXX is built with Q max 3.125 as printed and measures 6.413 long against L max 7.188. If the engineer rules that Q is 3.875, as the other four shell size 40 assemblies print, the solid must be rebuilt at that value.",
    "Model. MS3409DJ 12BXX prints H max 2.938, while 13BXX, with the same backshell MS3189B-71A and the same E, L and Q, prints 3.312. The solid uses 2.938 as printed; the engineer must decide which H applies to 12BXX."
   ]
  },
  {
   "id": "MS3451",
   "slug": "ms3451",
   "title": "Connectors,receptacle,electrical, cable connecting,rear release, crimp contact, AN type",
   "class": "Virginia",
   "folder": "Virginia/MS3451 Connectors, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 30,
   "dimensions": 240,
   "dimensions_met": 240,
   "kind": "Military standard",
   "dated": "OCTOBER 18 1971",
   "status": "Canceled, 23 December 2009",
   "newest": "Revision C Notice 2 - Cancellation, 23 December 2009",
   "superseding": "SAE-AS34511",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "5935-01-516-2862, connector, receptacle, electrical, MS3451 (Virginia)"
   ],
   "files": {
    "package": "MS3451 package.pdf",
    "scan": "MS3451 legacy scan.pdf",
    "clean": "MS3451 clean copy.pdf",
    "record": "MS3451 validation record.pdf",
    "sheet": "MS3451 3D model.pdf",
    "parts": "MS3451 parts list.pdf",
    "inspection": "MS3451 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS3451_24_size_16_12_contacts_-freecad.png",
    "pair": "Models/views/MS3451_24_size_16_12_contacts_-pair.png",
    "record": "Models/views/MS3451_24_size_16_12_contacts_-record.png",
    "front": "Models/views/MS3451_24_size_16_12_contacts_-front.png",
    "top": "Models/views/MS3451_24_size_16_12_contacts_-top.png",
    "right": "Models/views/MS3451_24_size_16_12_contacts_-right.png",
    "cut": "Models/views/MS3451_24_size_16_12_contacts_-cut.png"
   },
   "shown_part": "MS3451 24 (size 16 & 12 contacts)",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MS3451 receptacle shell for all 19 shell sizes, with both overall lengths for sizes 16 to 48: front shell N over length M, a round flange S by K with two flats R apart, and a rear body out to L MAX.",
   "not_modeled": [
    "Insert arrangements and contacts (MIL-STD-1651) and the front and rear end configuration, which the sheet refers to the procurement specification MIL-C-5015.",
    "The polarizing key, which the sheet shows but does not dimension.",
    "Threads, blue stripes, class, material and alternate insert position variants, which do not change the dimensioned envelope."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 3ecd73be46ad.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "295 of 389 items agreed. All 20 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "112 checks on size series and limits. 4 breaks checked against the scan: all are as printed. 125 values are also printed on 9 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (152 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "30 solids in STEP AP242. 240 of 240 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 2 - Cancellation, 23 December 2009.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The table prints S as 1.715 for shell size 24, where 1.724 would keep the even steps of the column (1.599 at size 22, 1.974 at size 28) and the .192 or .193 by which S exceeds N at every other size from 12 to 48. MS3401 prints 1.715 for the same shell in both of its tables, so the solid uses 1.715; the engineer should confirm the value."
   ]
  },
  {
   "id": "W-C-596H/GEN w/AMENDMENT 2",
   "slug": "w-c-596h-gen-w-amendment-2",
   "title": "Connector, electrical, power, general specification for",
   "class": "Virginia",
   "folder": "Virginia/W-C-596H_GEN w_AMENDMENT 2 Connector, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 38,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "2 JUNE 2017",
   "status": "Active, 11 March 2022",
   "newest": "Revision H Notice 1 - Validation, 11 March 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "W-C-596H_GEN w_AMENDMENT 2 package.pdf",
    "scan": "W-C-596H_GEN w_AMENDMENT 2 legacy scan.pdf",
    "clean": "W-C-596H_GEN w_AMENDMENT 2 clean copy.pdf",
    "record": "W-C-596H_GEN w_AMENDMENT 2 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "38 pages, 10 scanned. SHA-256 4c3633c2a135.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "10,799 of 10,905 items agreed. All 44 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "148 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "38 pages of searchable text, 15 tables (1,973 cells), 13 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "W-C-596H is a general specification for electrical power connectors (plugs, receptacles, cable outlets and male inlets) that sets materials, performance tests and quality conformance inspection and leaves each connector's design and physical dimensions to the applicable specification sheets (3.1) and NEMA WD 6; its dimensioned figures are test tools and fixtures (Figures 1-4, 6, 8 and 10), receptacle mounting hole spacing (Figure 11) and optional male-inlet mounting slots (Figure 12), and no table gives dimensions by size or part number.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Notice 1 - Validation, 11 March 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "WW-C-440b",
   "slug": "ww-c-440b",
   "title": "Clamps, hose, (low-pressure)",
   "class": "Virginia",
   "folder": "Virginia/WW-C-440b Clamps, hose",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 16,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "October 16, 1965",
   "status": "Canceled, 4 October 1994",
   "newest": "Revision B Notice 1 - Cancellation, 4 October 1994",
   "superseding": "A-A-52506",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 3,
   "by_class": {
    "Virginia": 2,
    "Ohio": 1
   },
   "stock_examples": [
    "4730-01-507-4272, clamp, hose, WW-C-440 TYP F (Virginia)",
    "4730-01-517-2858, clamp, hose, WW-C-440 TY 6.125-7.000 RANGE (Virginia)",
    "4730-01-441-8601, clamp, hose, WW-C-440 TY F (Ohio)"
   ],
   "files": {
    "package": "WW-C-440b package.pdf",
    "scan": "WW-C-440b legacy scan.pdf",
    "clean": "WW-C-440b clean copy.pdf",
    "record": "WW-C-440b validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "16 pages, all scanned. SHA-256 7321c351fbdb.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "6,504 of 6,552 items agreed. 33 differences went to a third reader. A second pass settled 25 from a second printing in the document, 1 from another revision, 2 from a closer look at the page. 5 readings remain open.",
     "result": "5 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "1,950 checks on size series and limits. 15 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "18 pages of searchable text, 6 tables (3,353 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "WW-C-440 is a general hose clamp specification: Figure 1 shows the eight clamp types as undimensioned outline sketches and Table IA gives only the inside diameter limits by nominal size, so band width, thickness, screw and housing geometry are not defined.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 1 - Cancellation, 4 October 1994. ASSIST also holds Revision B Amendment 2 (28 August 1973). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table IA, Type A, size 2-7/16, minimum: read as 2.28, could be 2.31.",
    "Open reading. Table IA, Type A, size 2-9/16, minimum: read as 2.41, could be 2.42.",
    "Open reading. Table IA, Type A, size 3-3/4, minimum: read as 3.52, could be 3.56.",
    "Open reading. Table IA, Type D, size 1-1/2, minimum: read as 1.35, could be 1.38.",
    "Open reading. Table IA, Type D, size 3-7/16, minimum: read as 3.26, could be 3.28.",
    "Printed value to confirm. Table IA, Type D, size 4-9/16 on page 4: the maximum prints 4.56, lower than the 4.59 printed for 4-1/2 in the row above. Every other Type D maximum is the nominal size plus 3/32, which gives 4.66 here.",
    "Printed value to confirm. Table IA, Type E, size 1-3/16 on page 5: the minimum prints 1.095, lower than the 1.100 printed for 1-1/8 in the row above. It is .123 below its own maximum of 1.218, where the rows around it differ by about .06.",
    "Printed value to confirm. Table IA, Type H on page 5: the size list prints 2-3/16, then 2-5/32, then 2-1/4. 2-5/32 is smaller than the size before it and is the only Type H size given in thirty-seconds.",
    "Printed value to confirm. Table IA, Type H on page 5: the size list prints 2-5/8, then 2-13/16, then 2-3/4, then 2-7/8. The sizes 2-13/16 and 2-3/4 are out of order.",
    "Printed value to confirm. Table IA, Type F, size 4-3/8 on page 5: the maximum prints 4.39. Every other Type F maximum is the nominal size to two places, which gives 4.38 here."
   ]
  },
  {
   "id": "WW-C-624E",
   "slug": "ww-c-624e",
   "title": "Coupling assembly, hose (garden, water, and water suction)",
   "class": "Virginia",
   "folder": "Virginia/WW-C-624E Coupling assembly, hose",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 18,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "August 21, 1989",
   "status": "Canceled, 21 August 2001",
   "newest": "Revision E Notice 1 - Cancellation, 21 August 2001",
   "superseding": "A-A-59614",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Virginia": 1
   },
   "stock_examples": [
    "4730-01-511-8059, coupling assembly, hose, WW-C-624 (Virginia)"
   ],
   "files": {
    "package": "WW-C-624E package.pdf",
    "scan": "WW-C-624E legacy scan.pdf",
    "clean": "WW-C-624E clean copy.pdf",
    "record": "WW-C-624E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, all scanned. SHA-256 ea4d06d79e08.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,709 of 3,767 items agreed. All 20 differences were settled against the page image. A second pass settled 1 from a closer look at the page.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "151 checks on size series and limits. 6 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 6 tables (323 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "WW-C-624 is a general federal specification for hose couplings that sets materials, threads by reference to FED-STD-H28/10, and pull, hydrostatic and vacuum tests, and dimensions its figures only with minimum shank, bowl and expansion-ring lengths (Tables I and II), leaving every bore, shank, nut, lug and ring diameter as required to suit the hose, so no part shape is fixed.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 1 - Cancellation, 21 August 2001.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "ZZ-H-561K",
   "slug": "zz-h-561k",
   "title": "Hose, rubber, and hose assemblies, rubber, smooth bore, water suction and discharge",
   "class": "Virginia",
   "folder": "Virginia/ZZ-H-561K Hose, rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 23,
   "solids": 12,
   "dimensions": 130,
   "dimensions_met": 130,
   "kind": "Federal specification",
   "dated": "July 26, 1988",
   "status": "Canceled, 2 July 2001",
   "newest": "Revision K Notice 1 - Cancellation, 2 July 2001",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Virginia": 1,
    "Los Angeles": 1
   },
   "stock_examples": [
    "4720-01-507-0969, hose assembly, nonmetallic, ZZ-H-561 (Virginia)",
    "4720-01-441-7721, hose assembly, nonmetallic, ZZ-H-561-A-A-1-025-264 (Los Angeles)"
   ],
   "files": {
    "package": "ZZ-H-561K package.pdf",
    "scan": "ZZ-H-561K legacy scan.pdf",
    "clean": "ZZ-H-561K clean copy.pdf",
    "record": "ZZ-H-561K validation record.pdf",
    "sheet": "ZZ-H-561K 3D model.pdf",
    "parts": "ZZ-H-561K parts list.pdf",
    "inspection": "ZZ-H-561K inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 6, page 23",
   "pictures": {
    "iso": "Models/views/ZZ-H-561_Style_D_nipple_size_8-freecad.png",
    "pair": "Models/views/ZZ-H-561_Style_D_nipple_size_8-pair.png",
    "record": "Models/views/ZZ-H-561_Style_D_nipple_size_8-record.png",
    "front": "Models/views/ZZ-H-561_Style_D_nipple_size_8-front.png",
    "top": "Models/views/ZZ-H-561_Style_D_nipple_size_8-top.png",
    "right": "Models/views/ZZ-H-561_Style_D_nipple_size_8-right.png",
    "cut": "Models/views/ZZ-H-561_Style_D_nipple_size_8-cut.png"
   },
   "shown_part": "ZZ-H-561 Style D nipple size 8",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the Figure 5 nipples for Style C hose and Figure 6 nipples for Style D hose in sizes 4, 6, 8, 10 and 12, and the Figure 2 flange bolt at its two lengths.",
   "not_modeled": [
    "The flanges A, B and C of Figures 3 and 4 and their lettered dimensions A to BB, the rubber and compression G rings, the hex compression nut, split pins, steel pins and flat head screws.",
    "The rubber hose itself (Table I inside diameters, tolerances and minimum tube and cover thickness), its plies and helix wire, and the hose end constructions of Figure 1.",
    "NPT thread form and taper on the nipples, and the 3/4-10 NC thread form on the bolt.",
    "The Style D nipple at lengths above the B minimum, and Style D nipples with more than the minimum two grooves."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "23 pages, all scanned. SHA-256 87cbb128aa67.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,671 of 5,699 items agreed. All 20 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "287 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "19 pages of searchable text, 12 tables (616 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "12 solids in STEP AP242. 130 of 130 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision K Notice 1 - Cancellation, 2 July 2001.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 5 prints the band end radius H for size 12 as 0.315. The other sizes print 0.1875 and 0.250, which are sixteenths of an inch, and the nearest sixteenth to 0.315 is 0.3125; the engineer must decide which value applies.",
    "Model. Figure 5 prints no wall thickness for the Style C nipple. Its footnote says dimensions conform to ASTM A53, schedule 40, but paragraph 3.4.5.2 calls for schedule 40 for the 4 and 6 inch sizes and schedule 30 for the 8 and 12 inch sizes and does not name the 10 inch size; the models use the schedule 40 wall for every size, and the engineer must decide the wall for sizes 8, 10 and 12.",
    "Model. The table of Figure 3 prints Y as 6 and 3/4 and Z as 8 and 3/4 for the 6 and 8 inch flanges, and a Z of 8 cannot lie inside P of 2 1/2 as Detail A draws it. The table of Figure 4 prints Y as the flange size (10 and 12) and Z as 7/8 for both sizes, so the engineer must decide whether Figure 3 means Y 6 and 8 and Z 3/4 for both sizes."
   ]
  },
  {
   "id": "A-A-1740",
   "slug": "a-a-1740",
   "title": "Lamp, photo, projection",
   "class": "Los Angeles",
   "folder": "Los Angeles/A-A-1740 Lamp, photo",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "December 31, 1981",
   "status": "Active, 31 December 1981",
   "newest": "Base Document, 31 December 1981",
   "superseding": "",
   "preparing_activity": "General Services Administration",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-449-6003, lamp, incandescent, A-A-1740 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-1740 package.pdf",
    "scan": "A-A-1740 legacy scan.pdf",
    "clean": "A-A-1740 clean copy.pdf",
    "record": "A-A-1740 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 d9f532cc4e87.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "241 of 242 items agreed. All 1 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 1 table (36 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-1740 is a commercial item description for MR-16 tungsten-halogen photo projection lamps (ELH, ENH, ENX and ELD/EJN) with no drawing: it gives watts, volts, base, filament, rated life, color temperature, a 1-3/4 inch maximum overall length, a 2-inch reflector diameter and a mounting distance for each type, and leaves the lamp\u2019s shape to the ANSI C78.370 and C78.1405 lamp designations, which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Base Document, 31 December 1981.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-1841",
   "slug": "a-a-1841",
   "title": "Lamp, fluorescent (F8T5/D)",
   "class": "Los Angeles",
   "folder": "Los Angeles/A-A-1841 Lamp, fluorescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "June 12, 1981",
   "status": "Active, 12 June 1981",
   "newest": "Base Document, 12 June 1981",
   "superseding": "",
   "preparing_activity": "General Services Administration",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-427-7448, lamp, fluorescent, A-A-1841 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-1841 package.pdf",
    "scan": "A-A-1841 legacy scan.pdf",
    "clean": "A-A-1841 clean copy.pdf",
    "record": "A-A-1841 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 42127692d8f7.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "254 of 255 items agreed. All 1 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 0 tables (0 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-1841 is a commercial item description for the 8 watt preheat-start F8T5/D fluorescent lamp that has no drawing or table, states only salient characteristics (T-5 bulb, 12 inch nominal length, miniature bipin base, 7500 hour rated life at 3 hours per start, 300 initial lumens, 250 lumens at 40 percent of life, daylight color) and sends dimensional and electrical characteristics to ANSI C78.2, which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Base Document, 12 June 1981.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-1845A",
   "slug": "a-a-1845a",
   "title": "Lamp, fluorescent (F15T8/D)",
   "class": "Los Angeles",
   "folder": "Los Angeles/A-A-1845A Lamp, fluorescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "August 29, 1984",
   "status": "Canceled, 19 June 1990",
   "newest": "Revision A, 29 August 1984",
   "superseding": "",
   "preparing_activity": "General Services Administration",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-152-2992, lamp, fluorescent, A-A-1845 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-1845A package.pdf",
    "scan": "A-A-1845A legacy scan.pdf",
    "clean": "A-A-1845A clean copy.pdf",
    "record": "A-A-1845A validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 180c8836e625.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "301 of 323 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 0 tables (0 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-1845A is a commercial item description for the 15 watt preheat-start F15T8/D fluorescent lamp that has no drawing or table, states only salient characteristics (T-8 bulb, 18 inch nominal length, medium bipin base, 7500 hour rated life at 3 hours per start, 695 initial lumens, 575 lumens at 40 percent of life, daylight color) and sends dimensional and electrical characteristics to ANSI C78.2, which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A, 29 August 1984.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-1846A",
   "slug": "a-a-1846a",
   "title": "Lamp, fluorescent (F15T8/CW)",
   "class": "Los Angeles",
   "folder": "Los Angeles/A-A-1846A Lamp, fluorescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "August 29, 1984",
   "status": "Active, 29 August 1984",
   "newest": "Revision A, 29 August 1984",
   "superseding": "",
   "preparing_activity": "General Services Administration",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-152-2982, lamp, fluorescent, A-A-1846 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-1846A package.pdf",
    "scan": "A-A-1846A legacy scan.pdf",
    "clean": "A-A-1846A clean copy.pdf",
    "record": "A-A-1846A validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 86a207481f5b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "302 of 324 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 0 tables (0 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-1846A is a commercial item description for the 15 watt preheat-start F15T8/CW fluorescent lamp that has no drawing, states only salient characteristics (T-8 bulb, 18 inch nominal length, medium bipin base, rated life, lumens, cool white color) and sends dimensional and electrical characteristics to ANSI C78.2, which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A, 29 August 1984.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-2042",
   "slug": "a-a-2042",
   "title": "Lamp, incandescent (sealed beam, trade no. 4546)",
   "class": "Los Angeles",
   "folder": "Los Angeles/A-A-2042 Lamp, incandescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "August 31, 1982",
   "status": "Active, 31 August 1982",
   "newest": "Base Document, 31 August 1982",
   "superseding": "",
   "preparing_activity": "General Services Administration",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-866-4143, lamp, incandescent, A-A-2042 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-2042 package.pdf",
    "scan": "A-A-2042 legacy scan.pdf",
    "clean": "A-A-2042 clean copy.pdf",
    "record": "A-A-2042 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 274fd9bf4d12.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "173 of 178 items agreed. All 5 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "1 page of searchable text, 0 tables (0 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-2042 is a commercial item description for the PAR 36 sealed beam incandescent lamp, trade no. 4546, for a hand lantern that has no drawing or table and states only salient characteristics: a 114 mm (4-1/2 inch) bulb diameter, a screw terminal base and a 2-3/4 inch maximum overall length, with the rest electrical and light-output values (4.7 volts dc, 0.5 ampere, approximately 6,300 maximum candlepower, 3 degree horizontal and vertical spread, C 2R filament, 100 hour rated life), so no dimension fixes the shape of the reflector, lens or terminals.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Base Document, 31 August 1982.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-50589",
   "slug": "a-a-50589",
   "title": "Lamp, incandescent, G-4-1/2, miniature bayonet, single contact",
   "class": "Los Angeles",
   "folder": "Los Angeles/A-A-50589 Lamp, incandescent",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 3,
   "solids": 2,
   "dimensions": 10,
   "dimensions_met": 10,
   "kind": "Commercial item description",
   "dated": "21 February 1992",
   "status": "Active, 21 November 2019",
   "newest": "Notice 4 - Validation, 21 November 2019",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-012-5588, lamp, incandescent, A-A-50589 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-50589 package.pdf",
    "scan": "A-A-50589 legacy scan.pdf",
    "clean": "A-A-50589 clean copy.pdf",
    "record": "A-A-50589 validation record.pdf",
    "sheet": "A-A-50589 3D model.pdf",
    "parts": "A-A-50589 parts list.pdf",
    "inspection": "A-A-50589 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/A50589-2-freecad.png",
    "pair": "Models/views/A50589-2-pair.png",
    "record": "Models/views/A50589-2-record.png",
    "front": "Models/views/A50589-2-front.png",
    "top": "Models/views/A50589-2-top.png",
    "right": "Models/views/A50589-2-right.png",
    "cut": "Models/views/A50589-2-cut.png"
   },
   "shown_part": "A50589-2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of A50589-1 and A50589-2, which share one outline: a hemisphere of the 9/16 inch G-4-1/2 globe joined to a cylinder of the same diameter that runs to the tip of the base contact at the 1-1/16 inch overall length and encloses the base as figure 1 draws it.",
   "not_modeled": [
    "The neck of the bulb, the miniature bayonet base with its two pins, and the single end contact, which figure 1 draws without dimensions.",
    "The 1/2 inch light center length from the center of the light source to the top of the base pins, since the solids carry neither the filament nor the pins.",
    "The filaments (C-2R for A50589-1, S-2 for A50589-2), the clear glass wall and the inside of the lamp.",
    "The ratings the lamp characteristics table gives for each part number (industry number, primary service, volts, amperes, candlepower and hours of life), which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 4cae14d5cd7f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "293 of 325 items agreed. 29 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 3 tables (41 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 10 of 10 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Notice 4 - Validation, 21 November 2019.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 1, callout, vertical bulb dimension (denominator): read as 9/16, could be 9/18.",
    "Model. The solids are built at the 9/16 bulb diameter, a reading of figure 1 that is still open against 9/18; the G-4-1/2 designation in the Physical table, 4-1/2 eighths of an inch, agrees with 9/16, while 9/18 is 1/2 inch, which is 4 eighths.",
    "Model. Figure 1 prints 9/16 and 1-1/16 with no tolerance and does not say whether either is a maximum; the contractor certification ties the product to the producer's own drawings, specifications and standards, and an engineer must take the limits from there before using the solid as a space claim.",
    "Model. The document gives no base diameter, base length, pin size or contact size, and places the base pins only through the 1/2 inch light center length, measured from a light center it does not locate in the bulb; an engineer who needs the base geometry must take it from the producer's drawings or the industry standard for the miniature bayonet single-contact base."
   ]
  },
  {
   "id": "A-A-52081B",
   "slug": "a-a-52081b",
   "title": "Tape, lacing and tying, polyester",
   "class": "Los Angeles",
   "folder": "Los Angeles/A-A-52081B Tape, lacing and tying",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "23 May 1998",
   "status": "Active, 22 April 2026",
   "newest": "Revision B Notice 4 - Validation, 22 April 2026",
   "superseding": "",
   "preparing_activity": "DLA Troop Support - Construction and Equipment Items of Supply Standardizat",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "4020-01-257-0701, tape, lacing and tying, A-A-52081 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-52081B package.pdf",
    "scan": "A-A-52081B legacy scan.pdf",
    "clean": "A-A-52081B clean copy.pdf",
    "record": "A-A-52081B validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 90e13fa2b2ff.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,584 of 1,637 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "70 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (125 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-52081B is a commercial item description for flat braided polyester lacing and tying tape that sets yarn, braid construction, finishes A, B, C and E, elongation, knot slip resistance, color, put-up on spools of at least 250 or 500 yards, testing, marking and a part-number scheme, and Table 1 gives only minimum and maximum width and thickness and minimum breaking strength for sizes 1 to 5 as material limits of a continuous tape, with no drawing and no fixed part length or shape.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 4 - Validation, 22 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-52160B",
   "slug": "a-a-52160b",
   "title": "Industrial V-belts (multiple drive)",
   "class": "Los Angeles",
   "folder": "Los Angeles/A-A-52160B Industrial v-belts, multiple drive",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "4 May 2017",
   "status": "Active, 29 August 2022",
   "newest": "Revision B Notice 1 - Validation, 29 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "3030-00-529-0344, belt, v, A-A-52160 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-52160B package.pdf",
    "scan": "A-A-52160B legacy scan.pdf",
    "clean": "A-A-52160B clean copy.pdf",
    "record": "A-A-52160B validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 7f2240bba793.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,655 of 1,682 items agreed. All 12 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "291 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 5 tables (448 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-52160B is a commercial item description for industrial multiple-drive V-belts that sets cord, static conductivity, cold-test torque, oil resistance, shelf life, marking and a part-number scheme, gives only the belt width for each width designator in Table I and the pitch length for each length designator in Table IV, and sends the belt cross-section dimensions and tolerances to RMA IP-20; its only drawing, Figure 1, is the undimensioned cold-test pulley rig sized by Table III.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 29 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table IV, row '75', columns 'Standard pitch lengths - Inches / Inch width designator (see table I) / A / Standard length (inches)' and 'Standard pitch lengths - Inches / Inch width designator (see table I) / B / Standard length (inches)': 75.3 then 76.8. Page 4 prints 75.3 for A and 76.8 for B in row 75; the printed A value itself looks wrong for its series, since every other A entry from 26 to 96 is the designator plus 1.3 and B is A plus 0.5, which gives 76.3, a point for an engineer."
   ]
  },
  {
   "id": "A-A-52463B",
   "slug": "a-a-52463b",
   "title": "Lamp bulbs, incandescent, miniature, single and double contact, bayonet candelabra base",
   "class": "Los Angeles",
   "folder": "Los Angeles/A-A-52463B Lamp bulbs, incandescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 5,
   "dimensions": 60,
   "dimensions_met": 60,
   "kind": "Commercial item description",
   "dated": "June 28, 1996",
   "status": "Active, 28 June 1996",
   "newest": "Revision B, 28 June 1996",
   "superseding": "",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-155-8720, lamp, incandescent, A-A-52463 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-52463B package.pdf",
    "scan": "A-A-52463B legacy scan.pdf",
    "clean": "A-A-52463B clean copy.pdf",
    "record": "A-A-52463B validation record.pdf",
    "sheet": "A-A-52463B 3D model.pdf",
    "parts": "A-A-52463B parts list.pdf",
    "inspection": "A-A-52463B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/AA52463-D01-freecad.png",
    "pair": "Models/views/AA52463-D01-pair.png",
    "record": "Models/views/AA52463-D01-record.png",
    "front": "Models/views/AA52463-D01-front.png",
    "top": "Models/views/AA52463-D01-top.png",
    "right": "Models/views/AA52463-D01-right.png",
    "cut": "Models/views/AA52463-D01-cut.png"
   },
   "shown_part": "AA52463-D01",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the type III lamps (AA52463-C01, AA52463-C02), an S8 bulb on a BAY15d base with two staggered pins, and the type IV lamps (AA52463-D01, AA52463-D02, AA52463-D03), an R12 reflector bulb on a BA15s base with two pins in one plane, each built to the dimensions of figure 3 or figure 4.",
   "not_modeled": [
    "Types I (AA52463-A01 to -A09) and II (AA52463-B01 to -B18): figure 1 gives only the 1.438 MAX overall length and note 3 the 0.81 inch light center length, figure 2 only the 1.041 MAX bulb diameter and 2.00 MAX length, and the BA15s base comes from ANSI C81.61, which is not part of this document.",
    "The insulator, the solder contacts (two on type III, one on type IV) and the end of the base shell, which the figures draw inside the .316 length without dimensions.",
    "The filaments and the 1.25 (REF) light center length of figure 3, the glass wall and the inside of the lamp.",
    "On figure 4, the solder at the bulb end of the base shell and the .350 MIN length from the solder to the pins, the frosted face, the silvered or aluminized reflector portion and the opaque coating; the solids carry no solder, and their shell runs clear for .508 from its end to the pins.",
    "The red and reflector coatings of 3.3 and 3.3.1, the marking of 3.6, and the electrical ratings and lives in the tables under each figure, which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 0 scanned. SHA-256 b330b73f3d99.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,379 of 1,385 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "17 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 4 tables (251 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "5 solids in STEP AP242. 60 of 60 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B, 28 June 1996.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. The table on page 3, column 'Design / Volts': 28 then 4. Page 3 prints 28.00 for B16 and 4 for B17; the series breaks because the column is in PIN order, but B17's printed 4 V at 0.75 A (3 W) for 32 candle power is implausible for an incandescent lamp and is a point for an engineer.",
    "Model. Figures 3 and 4 run .508 and .316 to a line drawn at the bulb side of the bayonet pin; if the intended datum is the pin center line, the pins of every solid move .040 (half the .080 pin diameter) toward the contact end.",
    "Model. The base dimensions .508, .316, .603, .033 and .080 are printed without tolerances and for engineering reference only, and 3.2 places the base under ANSI C81.61; an engineer must take the base limits from ANSI C81.61 before using these solids to check fit in a socket."
   ]
  },
  {
   "id": "A-A-52490A",
   "slug": "a-a-52490a",
   "title": "Belts, V: light-duty or fractional-horsepower",
   "class": "Los Angeles",
   "folder": "Los Angeles/A-A-52490A Belts, v-light-duty or fractional-horsepower",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "December 8, 1995",
   "status": "Active, 2 April 2026",
   "newest": "Revision A Notice 5 - Validation, 2 April 2026",
   "superseding": "",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 6,
   "by_class": {
    "Los Angeles": 6,
    "Seawolf": 1
   },
   "stock_examples": [
    "3030-00-419-9323, belt, v, A-A-52490-3L530 (Los Angeles, Seawolf)",
    "3030-00-528-3771, belt, v, A-A-52490 (Los Angeles)",
    "3030-00-528-3825, belts, v, matched set, A-A-52490 (Los Angeles)",
    "3030-00-528-4287, belts, v, matched set, A-A-52490 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-52490A package.pdf",
    "scan": "A-A-52490A legacy scan.pdf",
    "clean": "A-A-52490A clean copy.pdf",
    "record": "A-A-52490A validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 37ef5ccad61a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,364 of 1,364 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (28 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-52490A is a commercial item description for light-duty endless V-belts in RMA cross sections 2L, 3L, 4L and 5L that sets materials, construction, temperature, oil and electrical resistance, matched sets, marking and a part-number scheme, and sends the trapezoidal cross-section and effective length dimensions to RMA IP-23; Table I lists nominal top width, height and length ranges for reference only, with no drawing and no sidewall angle or bottom width.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 5 - Validation, 2 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-55005",
   "slug": "a-a-55005",
   "title": "Lamp, fluorescent, F20/T12/(COLOR)",
   "class": "Los Angeles",
   "folder": "Los Angeles/A-A-55005 Lamp, fluorescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "September 10, 1990",
   "status": "Inactive, 16 July 2025",
   "newest": "Notice 2 - Validation, 16 July 2025",
   "superseding": "",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-152-2996, lamp, fluorescent, A-A-55005 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-55005 package.pdf",
    "scan": "A-A-55005 legacy scan.pdf",
    "clean": "A-A-55005 clean copy.pdf",
    "record": "A-A-55005 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, all scanned. SHA-256 7631904a9e4d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "633 of 670 items agreed. All 24 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (24 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-55005 is a commercial item description for the 20 watt, 425 mA preheat-start F20/T-12 fluorescent lamp in cool white, white and daylight (A55005-1 to -3) that has no drawing or dimension table, states only salient characteristics (T-12 bulb, 24 inch nominal length, medium bipin contact base, 9,000 hour average rated life at 3 hours per start, average mercury content of 50 mg or less), gives initial and 4800-hour lumens, color temperature and CRI by color in Table I and NSNs, commercial stock numbers and CAGE codes in Table II, and sends dimensional and electrical characteristics to ANSI C78.1, which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Notice 2 - Validation, 16 July 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-55485/7B",
   "slug": "a-a-55485-7b",
   "title": "Mounting pads, electrical-electronic component, multiple applicatons",
   "class": "Los Angeles",
   "folder": "Los Angeles/A-A-55485_7B Mounting pads, electrical-electronic component",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 7,
   "dimensions": 76,
   "dimensions_met": 76,
   "kind": "Commercial item description specification sheet",
   "dated": "03 October 2022",
   "status": "Active, 3 October 2022",
   "newest": "Revision B, 3 October 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5999-01-338-0995, mounting pad, electrical-electron, A-A-55485/02 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-55485_7B package.pdf",
    "scan": "A-A-55485_7B legacy scan.pdf",
    "clean": "A-A-55485_7B clean copy.pdf",
    "record": "A-A-55485_7B validation record.pdf",
    "sheet": "A-A-55485_7B 3D model.pdf",
    "parts": "A-A-55485_7B parts list.pdf",
    "inspection": "A-A-55485_7B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/A-55485_07-004-freecad.png",
    "pair": "Models/views/A-55485_07-004-pair.png",
    "record": "Models/views/A-55485_07-004-record.png",
    "front": "Models/views/A-55485_07-004-front.png",
    "top": "Models/views/A-55485_07-004-top.png",
    "right": "Models/views/A-55485_07-004-right.png",
    "cut": "Models/views/A-55485_07-004-cut.png"
   },
   "shown_part": "A-55485/07-004",
   "application": "FreeCAD 1.1.4",
   "modeled": "Seven solids, one for each dash number -001 to -007 drawn in figure 1; each stands for both the D (diallyl phthalate) and N (nylon) PINs of Table I, which share one shape.",
   "not_modeled": [
    "The .010 radius note 4 permits on corners and edges and the 1\u00b0 draft it permits on sides: the solids have sharp corners and square sides.",
    "Material (diallyl phthalate or nylon), which Table I adds to the PIN as a suffix letter and which does not change the shape.",
    "Dash number -017 in Table II, which figure 1 does not draw."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 1 scanned. SHA-256 ce6913339263.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "644 of 677 items agreed. All 32 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "130 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 10 tables (176 cells), 7 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "7 solids in STEP AP242. 76 of 76 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B, 3 October 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. -001: figure 1 gives no length for the eight ribs and no center for the .031 R lobe; the model scales a .065 rib tip radius and a lobe center .130 from the axis from the drawing.",
    "Model. -002: figure 1 gives no position for the slots or the feet, and the .028 TYP is read as outer slot end to the start of the inner end radius; the model scales the slot end at .087 and the feet on a .188 circle.",
    "Model. -004: Section A-A places .085 across the long feet and .070 across the body though it draws the body thicker than the feet, and figure 1 does not dimension the .200 offset of the hole groups.",
    "Model. -004 and -005: figure 1 gives no countersink angle; the section lines put the countersink end .030 deep on both, about 62\u00b0 on -004 and 45\u00b0 on -005.",
    "Model. -006: the .375 round ends on 1.187 centers give 1.562 overall, not the printed 1.585; the model sets each end .0115 beyond its hole.",
    "Model. -007: figure 1 does not dimension the center slot's length; the model uses .260 scaled from the drawing.",
    "Model. Table II lists dash number 017, which neither figure 1 nor Table I defines."
   ]
  },
  {
   "id": "A-A-55559/4",
   "slug": "a-a-55559-4",
   "title": "Tape, electronic data processing, 8 millimeter (MM) (.315 inch (in)) wide, unformatted, supplied in AN unrecorded helical-scan digital computer tape cartridge",
   "class": "Los Angeles",
   "folder": "Los Angeles/A-A-55559_4 Tape, electronic data processing",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "August 31, 1995",
   "status": "Active, 9 August 2019",
   "newest": "Notice 3 - Validation, 9 August 2019",
   "superseding": "",
   "preparing_activity": "DLA Troop Support - Construction and Equipment Items of Supply Standardizat",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 2
   },
   "stock_examples": [
    "7045-01-226-7324, tape, electronic data processing, AA55559/01 (Los Angeles)",
    "7045-01-357-9939, tape, electronic data processing, A-A-55559/3 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-55559_4 package.pdf",
    "scan": "A-A-55559_4 legacy scan.pdf",
    "clean": "A-A-55559_4 clean copy.pdf",
    "record": "A-A-55559_4 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 2f4e5abaf511.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "679 of 695 items agreed. All 14 differences were settled against the page image. 1 value that the scan prints in a doubtful form is listed for the engineer.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 3 tables (38 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-55559/4 is a commercial item description for unformatted 8 mm helical-scan data processing tape supplied in an unrecorded cartridge (AA55559/04-001 to -003) that has no drawing: it fixes only the tape width (8.0 mm \u00b10.010 mm, paragraph 3.3) and the minimum tape length for each dash number (15, 54 and 112 m in Table I), gives no tape thickness, states formatted capacity and operating and storage temperature and humidity limits, and leaves the cartridge\u2019s shape to ANSI/ISO/IEC 11319, which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Notice 3 - Validation, 9 August 2019.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. The typeface prints its zero and its capital O alike; the first characters of the two CAGE codes are read as zeros (0CEN9, 0DA14)."
   ]
  },
  {
   "id": "A-A-59613",
   "slug": "a-a-59613",
   "title": "Hose and hose assemblies, nonmetallic spray",
   "class": "Los Angeles",
   "folder": "Los Angeles/A-A-59613 Hose and hose assemblies, nonmetallic spray",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "August 16, 2001",
   "status": "Active, 18 September 2023",
   "newest": "Notice 4 - Validation, 18 September 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "4720-00-289-3429, hose assembly, nonmetallic, A-A-59613 (Los Angeles)"
   ],
   "files": {
    "package": "A-A-59613 package.pdf",
    "scan": "A-A-59613 legacy scan.pdf",
    "clean": "A-A-59613 clean copy.pdf",
    "record": "A-A-59613 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 b16cb5c04a2d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,608 of 1,611 items agreed. All 3 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "15 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 5 tables (236 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-59613 is a commercial item description that sets the nominal hose ID and its tolerance by size code (Table I, 3.2.1), the minimum ID at the coupling bulge (Table III), a 0.023 in minimum cover thickness and material and pressure performance limits, but gives no outside diameter, wall thickness or coupling dimensions and leaves length to the contract, so it does not fix the shape of any part.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Notice 4 - Validation, 18 September 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "FF-P-2827A",
   "slug": "ff-p-2827a",
   "title": "Padlock, key operated, general field service",
   "class": "Los Angeles",
   "folder": "Los Angeles/FF-P-2827A Padlock, key operated",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 13,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "27 NOVEMBER 2002",
   "status": "Active, 19 December 2022",
   "newest": "Revision A Notice 3 - Validation, 19 December 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5340-01-497-2305, padlock set, FF-P-2827 (Los Angeles)"
   ],
   "files": {
    "package": "FF-P-2827A package.pdf",
    "scan": "FF-P-2827A legacy scan.pdf",
    "clean": "FF-P-2827A clean copy.pdf",
    "record": "FF-P-2827A validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "13 pages, 0 scanned. SHA-256 a3322c2dce6f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,879 of 4,895 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 4 tables (104 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "FF-P-2827A is a federal performance specification for U-shaped shackle, key-operated general field service padlocks in sizes A and B that leaves the padlock's shape to the contractor (3.1, 3.4), has no figure or dimensioned drawing, and fixes only a nominal shackle diameter (0.375 or 0.500 +/-0.020 in), a clear opening (1.25 x 1.25 or 1.50 x 1.25 in), a 24 cubic inch volume limit and a 3 lb weight limit, along with keying, materials, forced-entry and ASTM F883 test requirements.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 3 - Validation, 19 December 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "FF-S-200E",
   "slug": "ff-s-200e",
   "title": "Setscrews: hexagon socket and spline socket, headless",
   "class": "Los Angeles",
   "folder": "Los Angeles/FF-S-200E Setscrews-hexagon socket and spline socket, hea",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "3 April 2025",
   "status": "Active, 3 April 2025",
   "newest": "Revision E, 3 April 2025",
   "superseding": "",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1,
    "Ohio": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5305-00-256-9459, setscrew, FF-S-200 (Los Angeles, Ohio, Seawolf)"
   ],
   "files": {
    "package": "FF-S-200E package.pdf",
    "scan": "FF-S-200E legacy scan.pdf",
    "clean": "FF-S-200E clean copy.pdf",
    "record": "FF-S-200E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, 0 scanned. SHA-256 63bdf438e0b8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,209 of 3,218 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "51 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 3 tables (118 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "FF-S-200 is a procurement specification for hexagon socket and spline socket headless setscrews that sets types, point styles, materials, finishes, hardness, decarburization limits and inspection defect classes, and sends all dimensions and tolerances to ASME B18.3; its only dimensioned figure, Figure 1 with the table under it, gives the allowed 1/4 H decarburization depth for each thread pitch, not the setscrew itself.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E, 3 April 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "FF-W-92C w/ AMENDMENT 3",
   "slug": "ff-w-92c-w-amendment-3",
   "title": "Washer, flat (plain)",
   "class": "Los Angeles",
   "folder": "Los Angeles/FF-W-92C w_ AMENDMENT 3 Washer, flat",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 10,
   "solids": 13,
   "dimensions": 91,
   "dimensions_met": 91,
   "kind": "Federal specification",
   "dated": "19 May 2025",
   "status": "Active, 19 May 2025",
   "newest": "Revision C Amendment 3 (all previous amendments incorporated), 19 May 2025",
   "superseding": "",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 2,
    "Seawolf": 1
   },
   "stock_examples": [
    "5310-00-616-6750, washer, flat, FF-W-92 (Los Angeles, Seawolf)",
    "5310-01-500-3234, washer, flat, FF-W-92 (Los Angeles)"
   ],
   "files": {
    "package": "FF-W-92C w_ AMENDMENT 3 package.pdf",
    "scan": "FF-W-92C w_ AMENDMENT 3 legacy scan.pdf",
    "clean": "FF-W-92C w_ AMENDMENT 3 clean copy.pdf",
    "record": "FF-W-92C w_ AMENDMENT 3 validation record.pdf",
    "sheet": "FF-W-92C w_ AMENDMENT 3 3D model.pdf",
    "parts": "FF-W-92C w_ AMENDMENT 3 parts list.pdf",
    "inspection": "FF-W-92C w_ AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {
    "iso": "Models/views/FF-W-92_Type_B_1.000-freecad.png",
    "pair": "Models/views/FF-W-92_Type_B_1.000-pair.png",
    "record": "Models/views/FF-W-92_Type_B_1.000-record.png",
    "front": "Models/views/FF-W-92_Type_B_1.000-front.png",
    "top": "Models/views/FF-W-92_Type_B_1.000-top.png",
    "right": "Models/views/FF-W-92_Type_B_1.000-right.png",
    "cut": "Models/views/FF-W-92_Type_B_1.000-cut.png"
   },
   "shown_part": "FF-W-92 Type B 1.000",
   "application": "FreeCAD 1.1.4",
   "modeled": "Type B, grade I square flat washers for the 13 nominal bolt sizes of Table I, .375 to 2.000, each a square plate of the outside width and thickness with a round hole of the inside diameter through its center.",
   "not_modeled": [
    "Type A round washers, grade I and grade II, which the document dimensions only by reference to ASME B18.21.1 and NAS1149 (3.3.1.1, 3.3.1.2).",
    "Grade II square washers, for which Table I gives no dimensions.",
    "Material classes A to J (3.1) and protective finishes (3.2), which change no dimension: one solid per bolt size stands for every class.",
    "The workmanship requirement that washers be free of sharp edges (3.4): no edge break is dimensioned, so the solids keep sharp edges.",
    "Face flatness and parallelism (3.3.1.3) and concentricity (3.3.1.4), which the document sets for Type A round washers."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "10 pages, 0 scanned. SHA-256 7eacefab78c6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,565 of 2,567 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "201 checks on size series and limits. 13 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 1 table (91 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "13 solids in STEP AP242. 91 of 91 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Amendment 3 (all previous amendments incorporated), 19 May 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The document gives no hole position, face flatness or face parallelism tolerance for Type B square washers, since 3.3.1.3 and 3.3.1.4 sit under Type A round washers only."
   ]
  },
  {
   "id": "MIL-B-23071/29",
   "slug": "mil-b-23071-29",
   "title": "Blowers: miniature, for cooling electronic equipment, tubeaxial (30 watts input power)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-B-23071_29 Blowers-miniature, for cooling electronic equip",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 5,
   "solids": 1,
   "dimensions": 20,
   "dimensions_met": 20,
   "kind": "Military specification sheet",
   "dated": "20 February 1980",
   "status": "Active, 15 February 2017",
   "newest": "Notice 5 - Validation, 15 February 2017",
   "superseding": "",
   "preparing_activity": "DLA Troop Support - Construction and Equipment Items of Supply Standardizat",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "4140-01-163-6009, fan, tubeaxial, M23071/29-0001 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-B-23071_29 package.pdf",
    "scan": "MIL-B-23071_29 legacy scan.pdf",
    "clean": "MIL-B-23071_29 clean copy.pdf",
    "record": "MIL-B-23071_29 validation record.pdf",
    "sheet": "MIL-B-23071_29 3D model.pdf",
    "parts": "MIL-B-23071_29 parts list.pdf",
    "inspection": "MIL-B-23071_29 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M23071_29-001-freecad.png",
    "pair": "Models/views/M23071_29-001-pair.png",
    "record": "Models/views/M23071_29-001-record.png",
    "front": "Models/views/M23071_29-001-front.png",
    "top": "Models/views/M23071_29-001-top.png",
    "right": "Models/views/M23071_29-001-right.png",
    "cut": "Models/views/M23071_29-001-cut.png"
   },
   "shown_part": "M23071/29-001",
   "application": "FreeCAD 1.1.4",
   "modeled": "One envelope solid of the M23071/29-001 blower housing, axis along X: the 6.75 diameter outline cut by flats 5.92 apart, 2.00 deep, with a .093 flange at each end and four .172 mounting holes through .290 bosses, 6.375 apart top to bottom.",
   "not_modeled": [
    "The air passage, motor hub, struts and blades, which Figure 1 draws but does not dimension.",
    "The three leads (YE, RD and GN), 18 inches minimum out of the case and stripped .50 \u00b1.09; the front view draws where they leave the housing but does not dimension it.",
    "The ground connection available on request, located .75 \u00b1.06 from the mounting-hole centerline and .88 \u00b1.06 from the inlet face.",
    "The threaded stainless steel inserts available on request in place of the plain .172 mounting holes.",
    "The nameplate on the outside diameter and the rotation and air flow arrows.",
    "The capacitor, which note 4 says is not supplied with the blower, and the weight, electrical, performance and environmental requirements on pages 2 and 3."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, all scanned. SHA-256 88c0e50ad3a8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "304 of 319 items agreed. 6 differences went to a third reader. 2 readings remain open.",
     "result": "2 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "24 checks on size series and limits. 1 break checked against the scan: it is as printed. A later review settled 1 printed value from the column's units and limits.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 4 tables (130 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "1 solid in STEP AP242. 20 of 20 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Notice 5 - Validation, 15 February 2017. ASSIST also holds Amendment 1 (2 November 1981). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 1, callout 10: read as 6-24, could be E-24.",
    "Open reading. Figure 1, callout 16: read as #8-32, could be #6-32."
   ]
  },
  {
   "id": "MIL-B-81934B",
   "slug": "mil-b-81934b",
   "title": "Bearings, sleeve, plain and flanged, self-lubricating, general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-B-81934B Bearings, sleeve",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 31,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "3 May 1991",
   "status": "Canceled, 2 July 1998",
   "newest": "Revision B Notice 1 - Cancellation, 2 July 1998",
   "superseding": "SAE-AS81934",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-B-81934B package.pdf",
    "scan": "MIL-B-81934B legacy scan.pdf",
    "clean": "MIL-B-81934B clean copy.pdf",
    "record": "MIL-B-81934B validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "31 pages, all scanned. SHA-256 04252ff3b0e7.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,240 of 5,759 items agreed. All 35 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "20 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "21 pages of searchable text, 4 tables (492 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-B-81934B is the general specification for plain and flanged sleeve bearings with a PTFE liner in the bore and has no dimensioned bearing drawing: it sets finishes, liner bond and peel strength, wear limits, load and torque values for six part numbers (Table I), inspection, test methods and packaging, and leaves design, dimensions and tolerances to specification sheets MIL-B-81934/1 and /2 (3.4, 3.5.1), which it does not reproduce; Figure 1 sizes the radial test fixture's pin and housings by formulas in the sheet letters B, D, L and F, and the Figure 2 peel test fixture has no dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 1 - Cancellation, 2 July 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-B-857A(SHIPS)",
   "slug": "mil-b-857a-ships",
   "title": "Bolts, nuts, and studs",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-B-857A(SHIPS) Bolts, nuts",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 51,
   "solids": 396,
   "dimensions": 3586,
   "dimensions_met": 3584,
   "kind": "Military specification",
   "dated": "1 June 1956",
   "status": "Canceled, 13 January 1976",
   "newest": "Revision A Notice 1 - Cancellation, 13 January 1976",
   "superseding": "MIL-DTL-1222",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5305-01-234-4475, screw, cap, MIL-B-857TYP30.50013UNC2A2.00 (Ohio)"
   ],
   "files": {
    "package": "MIL-B-857A(SHIPS) package.pdf",
    "scan": "MIL-B-857A(SHIPS) legacy scan.pdf",
    "clean": "MIL-B-857A(SHIPS) clean copy.pdf",
    "record": "MIL-B-857A(SHIPS) validation record.pdf",
    "sheet": "MIL-B-857A(SHIPS) 3D model.pdf",
    "parts": "MIL-B-857A(SHIPS) parts list.pdf",
    "inspection": "MIL-B-857A(SHIPS) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 12",
   "pictures": {
    "iso": "Models/views/MIL-B-857_bolt_type_II_1_x_4-freecad.png",
    "pair": "Models/views/MIL-B-857_bolt_type_II_1_x_4-pair.png",
    "record": "Models/views/MIL-B-857_bolt_type_II_1_x_4-record.png",
    "front": "Models/views/MIL-B-857_bolt_type_II_1_x_4-front.png",
    "top": "Models/views/MIL-B-857_bolt_type_II_1_x_4-top.png",
    "right": "Models/views/MIL-B-857_bolt_type_II_1_x_4-right.png",
    "cut": "Models/views/MIL-B-857_bolt_type_II_1_x_4-cut.png"
   },
   "shown_part": "MIL-B-857 bolt type II 1 x 4",
   "application": "FreeCAD 1.1.4",
   "modeled": "396 solids from tables VI to XVIII: 86 bolts of types I to V (hexagon heads with top chamfer, washer face, fillet and point, round heads and square necks), one per size at a representative length; 254 hexagon nuts of types I to VII, types II to VII in style a (washer faced) and style b (double chamfered), slotted on types VI and VII; and 56 double-end studs of types I and II in styles a and b, one per size at a representative length; every thread is a plain cylinder at its basic major diameter.",
   "not_modeled": [
    "The sheet lists no bolt or stud lengths, so each size is built at one representative length (4 times the nominal size for bolts, 6 times for studs, rounded up to a quarter inch); other lengths of the same size are not built.",
    "Thread form, pitch, class and runout (Handbook H28, table V, figures 5 and 6, the 2-1/2 imperfect threads of studs): external threads are plain cylinders and nut threads plain bores at the basic major diameter.",
    "Form and position tolerances (side taper of heads and nuts up to 2 degrees, squareness and concentricity of the bearing face, thread runout, stud straightness) and the gages of 3.4.1.10 and appendix III: the solids are ideal geometry.",
    "The swell or fin under the head allowed by footnote 1 of tables VI and VII, the irregular head edge of types IV and V, and the plus tolerances for hot-dip zinc coating (3.4.2.1.1).",
    "Forms the sheet allows in place of the one built: the washer-crowned top of type I nuts, chamfered bearing corners on type III bolts, round slot bottoms, the undersize body of types IV and V, other point forms, the fine thread series, and the wider width across flats allowed on hot-made type III bolts and hot-formed finished nuts.",
    "The countersink of the tapped hole of finished nuts (its diameter over the major diameter is given, not its angle), the 45 degree maximum chamfer at the end of the type V square neck, and the fillet under the type V head where it meets the square neck (1/32 or 1/16 maximum, 3.4.1.5).",
    "Grade identification marks, materials, heat treatment, coatings, mechanical properties and tests."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "51 pages, all scanned. SHA-256 e15d0d933c40.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "12,262 of 12,634 items agreed. 228 differences went to a third reader. A second pass settled 1 from the sheet's layout (a point the scan did not print). 4 readings remain open.",
     "result": "4 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "3,049 checks on size series and limits. 26 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "51 pages of searchable text, 36 tables (3,483 cells), 21 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "396 solids in STEP AP242. 3,584 of 3,586 stated dimensions measure within limits; 2 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 1 - Cancellation, 13 January 1976.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 12, End of the first line and start of the second line: read as dimensions specified, could be dimensions and tolerances specified.",
    "Open reading. Page 18, Running header at top left of page 18, first digit: read as MIL-B-857A(SHIPS), could be MIL-B-357A(SHIPS).",
    "Open reading. Table XVII, row 8, column 6: read as .750, could be .756.",
    "Open reading. Page 33, line 3, the word after \"in accordance with the\": read as rules, could be rates.",
    "Printed value to confirm. Table VIII, radius of fillet R: the scan prints the smaller radius under Max. and the larger under Min. in all 20 rows (.009/.023 for 1/4 to 1/2 inch up to .062/.093 for 1 inch and over). The labels look transposed: read R as minimum then maximum.",
    "Printed value to confirm. Table XIV, 9/16 inch jam nut: the scan prints a nominal thickness of 6/16, but its limits .324 and .301 center on 5/16, the nominal of the 1/2 inch jam nut above it, so 6/16 looks like a misprint of 5/16. The fall of the minimum from .302 to .301 is correct.",
    "Printed value to confirm. Table XVII, 1-3/8 inch full-body studs (type I, styles a and b): the scan prints a maximum body diameter of 1.295, below the printed minimums 1.356 and 1.354. Paragraph 3.4.3.2 (a) and every other row give the nominal size plus 0.020, so the maximum should read 1.395; 1.295 looks like a misprint.",
    "Model. Table V gives threads per inch only up to 3 inches and table XXII stops at 2-3/4 inches, but type I and II bolts run to 4 inches, so for 3-1/4 to 4 inch bolts the pitch, the minimum body diameter of 3.4.1.2 (a), the 2-1/2 thread tolerance on type II thread length and the type II point are not defined. The models use the table maximum body diameter, a 3/16 thread-length tolerance and a flat end; the engineer must give the thread series for these sizes.",
    "Model. Table XI has no length tolerance column for No. 10 bolts (types IV and V) or 9/16 inch studs: its columns are 1/4 to 3/8, 7/16 and 1/2, 5/8 to 1-1/4, and over 1-1/4. The models are at nominal length; the engineer must set the tolerance.",
    "Model. For type III bolts, note 10 of table VIII gives minus-only length tolerances (minus 1/16 inch on a 1/2 x 2 inch bolt), while 3.4.1.3.1 and table XI give plus or minus (plus or minus 1/16 inch). The models sit in the band both allow; the engineer must say which governs.",
    "Model. Table XVIII gives the 1-1/2 inch stud tap-end minimum thread length C as 2.500, but 3.4.3.3.1 sets it at 1-1/2 times the nominal diameter, 2.250, with a maximum of 2.667. The models use 2.583, which meets both; the engineer must confirm the minimum.",
    "Model. Table XVII prints the 1-3/8 inch type I stud body diameter A as max 1.295 with min 1.356 (style a) and 1.354 (style b), so no body meets both; 3.4.3.2 (a) and the other rows (nominal size plus 0.020) point to a maximum of 1.395. The models are built at the middle of the printed values and fail this check; the engineer must confirm the maximum.",
    "Model. The 3/4 inch type II style a stud body maximum in table XVII is an open reading, .750 or .756; the model uses .750."
   ]
  },
  {
   "id": "MIL-C-17/174A",
   "slug": "mil-c-17-174a",
   "title": "Cables, radio frequency, flexible, coaxial, 50 ohms, M17/174-00001",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-C-17_174A Cables, radio frequency",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 1,
   "dimensions": 5,
   "dimensions_met": 5,
   "kind": "Military specification sheet",
   "dated": "30 October 1984",
   "status": "Canceled, 13 March 2007",
   "newest": "Revision A Notice 4 - Cancellation, 13 March 2007",
   "superseding": "Notice 4 for Replacement Information",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6145-01-096-6844, cable, radio frequency, M17/174-00001 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-C-17_174A package.pdf",
    "scan": "MIL-C-17_174A legacy scan.pdf",
    "clean": "MIL-C-17_174A clean copy.pdf",
    "record": "MIL-C-17_174A validation record.pdf",
    "sheet": "MIL-C-17_174A 3D model.pdf",
    "parts": "MIL-C-17_174A parts list.pdf",
    "inspection": "MIL-C-17_174A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M17_174-00001-freecad.png",
    "pair": "Models/views/M17_174-00001-pair.png",
    "record": "Models/views/M17_174-00001-record.png",
    "front": "Models/views/M17_174-00001-front.png",
    "top": "Models/views/M17_174-00001-top.png",
    "right": "Models/views/M17_174-00001-right.png",
    "cut": "Models/views/M17_174-00001-cut.png"
   },
   "shown_part": "M17/174-00001",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid of revolution for M17/174-00001, the only part: a 2.500 inch representative length of the cable with the jacket, the outer conductor, the dielectric core and the inner conductor stepped back in turn as Figure 1 draws them, each at its Table I diameter.",
   "not_modeled": [
    "The seven 0.0312 inch strands of the inner conductor; laid six around one they span 3 x 0.0312 = 0.0936 inch, inside the .094 \u00b1.001 overall diameter the solid carries.",
    "The weave of the two AWG #34 silver-coated copper braids (inner braid 95.7% coverage, 24 carriers, 6 ends, 16.6 \u00b110% picks per inch; outer braid 98.0% coverage, 24 carriers, 7 ends, 15.4 \u00b110% picks per inch) and the diameter over the inner braid, which the sheet does not give.",
    "Materials: silver-coated copper conductors, a type F-1 solid extruded PTFE core and a type IX FEP jacket.",
    "Test limits that are not shape: inner conductor movement after the 200\u00b0C dimensional stability test (.250 inch max from the core, .312 inch max from the jacket), the stress crack mandrel of 7 1/2 jacket diameters, the 17.5 pounds per 100 feet weight limit, and the electrical requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 24a243d1f4db.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "361 of 366 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (14 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "1 solid in STEP AP242. 5 of 5 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 4 - Cancellation, 13 March 2007.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-C-28754/27A",
   "slug": "mil-c-28754-27a",
   "title": "Connectors, electrical, modular, extractor, module, double span, style I",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-C-28754_27A Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 8,
   "dimensions": 177,
   "dimensions_met": 177,
   "kind": "Military specification sheet",
   "dated": "30 April 1979",
   "status": "Canceled, 7 September 1990",
   "newest": "Revision A Notice 2 - Cancellation, 7 September 1990",
   "superseding": "",
   "preparing_activity": "Naval Surface Warfare Center, Crane Division (S/S by SH)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5998-01-434-4112, extractor, electrical card, M28754/27-01 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-C-28754_27A package.pdf",
    "scan": "MIL-C-28754_27A legacy scan.pdf",
    "clean": "MIL-C-28754_27A clean copy.pdf",
    "record": "MIL-C-28754_27A validation record.pdf",
    "sheet": "MIL-C-28754_27A 3D model.pdf",
    "parts": "MIL-C-28754_27A parts list.pdf",
    "inspection": "MIL-C-28754_27A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28754_27-01_slide-freecad.png",
    "pair": "Models/views/M28754_27-01_slide-pair.png",
    "record": "Models/views/M28754_27-01_slide-record.png",
    "front": "Models/views/M28754_27-01_slide-front.png",
    "top": "Models/views/M28754_27-01_slide-top.png",
    "right": "Models/views/M28754_27-01_slide-right.png",
    "cut": "Models/views/M28754_27-01_slide-cut.png"
   },
   "shown_part": "M28754/27-01 slide",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the parts that figures 2 to 6 of MIL-C-28754/27A dimension for the M28754/27-01 module extractor: the plate puller as drilled and its pin (detail A), the slide and the handle each in .31 half-round bar and in the .31 x .19 flat-wire alternate, the cellular rubber cushion insert with its groove and finger slot, and the sleeve after shrinking.",
   "not_modeled": [
    "The figure 1 assembly: where the parts sit together (2.85 \u00b1.06 to the center between the grips), the two MS51957-2 screws and the sleeves shrunk over the legs; each part is a separate solid.",
    "The brazed joint between the plate puller and its pins, and the braze in the countersinks (note 5 of figure 2).",
    "The marking M28754/27-01, .12 high and .06 \u00b1.03 above the bottom edge of the plate puller.",
    "Materials and cadmium plate; the solids are at the before-plating sizes the notes call for.",
    "The 2-56 UNC-2B thread form of the slide's tapped holes.",
    "The sleeve as supplied (inside diameter .500 min, class 1), whose wall thickness the sheet does not give."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 be38cebd66f3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "757 of 773 items agreed. All 20 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "151 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 6 tables (175 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "8 solids in STEP AP242. 177 of 177 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 2 - Cancellation, 7 September 1990.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Cushion insert: at the nominal .69 R corners and 35\u00b0 sides the straight side would leave the corner .926 below the groove bottom, outside .97 \u00b1.03; the model keeps .97, which leans the sides 39.6\u00b0, inside 35\u00b0\u00b15\u00b0 but .4\u00b0 from its limit, and an engineer must say which value governs the outline.",
    "Model. Handle: the sheet gives no width for the leg slots; the model makes them .062 wide, the width of their .031 R ends, which clears the .048 plate puller ears by .014, and takes .85 and .50 to the centers of the end radii rather than to the slot ends.",
    "Model. Slide: .078 TYP from the outside of each 5.68 leg puts the tapped holes 5.524 apart, while 5.531 REF and the plate puller's A holes are 5.531 apart; an engineer must say whether the holes are located from 5.531 so the 2-56 screws line up with the .093 A holes."
   ]
  },
  {
   "id": "MIL-C-39014/6B",
   "slug": "mil-c-39014-6b",
   "title": "Capacitors, fixed, ceramic dielectric (general purpose), established reliability style CKR13",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-C-39014_6B Capacitors, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 56,
   "dimensions": 448,
   "dimensions_met": 448,
   "kind": "Military specification sheet",
   "dated": "21 August 1970",
   "status": "Canceled, 17 September 1993",
   "newest": "Revision B Notice 2 - Cancellation, 17 September 1993",
   "superseding": "MIL-C-39014/5",
   "preparing_activity": "Army Research Laboratory, Physical Sciences Directorate (S/S by CR)",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 2
   },
   "stock_examples": [
    "5925-01-497-1175, circuit breaker, MIL-PRF-39014/6 (Los Angeles)",
    "5925-01-497-1180, circuit breaker, MIL-PRF-39014/6 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-C-39014_6B package.pdf",
    "scan": "MIL-C-39014_6B legacy scan.pdf",
    "clean": "MIL-C-39014_6B clean copy.pdf",
    "record": "MIL-C-39014_6B validation record.pdf",
    "sheet": "MIL-C-39014_6B 3D model.pdf",
    "parts": "MIL-C-39014_6B parts list.pdf",
    "inspection": "MIL-C-39014_6B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39014_06-0147-freecad.png",
    "pair": "Models/views/M39014_06-0147-pair.png",
    "record": "Models/views/M39014_06-0147-record.png",
    "front": "Models/views/M39014_06-0147-front.png",
    "top": "Models/views/M39014_06-0147-top.png",
    "right": "Models/views/M39014_06-0147-right.png",
    "cut": "Models/views/M39014_06-0147-cut.png"
   },
   "shown_part": "M39014/06-0147",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 56 style CKR13 capacitors M39014/06-0101 to -0174, which share the one outline of Figure 1: a cylindrical body .490 long and .190 in diameter with a .0265 diameter axial lead running 1.25 out from the center of each end.",
   "not_modeled": [
    "The capacitor inside the case (ceramic dielectric, electrodes and the joint between the leads and the element), which the sheet does not draw; the body is solid.",
    "The electrical and test requirements, which do not change the outline: the Table I capacitance, capacitance tolerance and failure rate level of each dash number, the 100 volt dc rating and its 50 percent derating at 125\u00b0C (Figure 2), voltage-temperature limits, dissipation factor, insulation resistance, dielectric withstanding voltage, immersion, moisture resistance and life."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, all scanned. SHA-256 98a34535d7db.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "569 of 587 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "147 checks on size series and limits. 14 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (100 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "56 solids in STEP AP242. 448 of 448 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 2 - Cancellation, 17 September 1993. ASSIST also holds Revision B Amendment 1 (21 August 1972). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-C-55629/15C",
   "slug": "mil-c-55629-15c",
   "title": "Circuit breakers, magnetic, unsealed, trip-free, two pole, front mounted auxiliary contacts (1 to 100 amperes)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-C-55629_15C Circuit breakers, magnetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 3,
   "dimensions": 87,
   "dimensions_met": 87,
   "kind": "Military specification sheet",
   "dated": "3 April 2010",
   "status": "Inactive, 10 October 2024",
   "newest": "Revision C Notice 2 - Validation, 10 October 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5925-01-497-2042, circuit breaker, M55629/15CQCQ (Los Angeles)"
   ],
   "files": {
    "package": "MIL-C-55629_15C package.pdf",
    "scan": "MIL-C-55629_15C legacy scan.pdf",
    "clean": "MIL-C-55629_15C clean copy.pdf",
    "record": "MIL-C-55629_15C validation record.pdf",
    "sheet": "MIL-C-55629_15C 3D model.pdf",
    "parts": "MIL-C-55629_15C parts list.pdf",
    "inspection": "MIL-C-55629_15C inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M55629_15LKMK-freecad.png",
    "pair": "Models/views/M55629_15LKMK-pair.png",
    "record": "Models/views/M55629_15LKMK-record.png",
    "front": "Models/views/M55629_15LKMK-front.png",
    "top": "Models/views/M55629_15LKMK-top.png",
    "right": "Models/views/M55629_15LKMK-right.png",
    "cut": "Models/views/M55629_15LKMK-cut.png"
   },
   "shown_part": "M55629/15LKMK",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the three terminal arrangements that every M55629/15 PIN falls into (0-50 A or 51-100 A studs by pole, poles in ascending rating), each at one representative PIN: the A by S by L case with four No. 6 mounting inserts, the full-width actuator boss, two tied handles thrown 30\u00b0, the pole barrier out to U and K, and four rear terminal studs.",
   "not_modeled": [
    "Every other PIN: each pole takes one of 144 current and delay codes (Tables I and II), giving over 10,000 PINs, but only the stud size of each pole changes the outline, so one representative PIN stands for each of the three arrangements.",
    "The loose terminal hardware of notes 4, 5, 6 and 10: the hex nuts (.190-32 UNF-2B, .308 \u00b1.005 across flats, .109 \u00b1.010 thick; or .250-20 UNC-2B, .438 or .375 \u00b1.016 across flats, .156 \u00b1.016 thick), the tooth lockwasher, the flat washer (.370 OD, .197 ID, .032 thick; or .500 OD, .281 ID, .035 thick) and the split lockwasher; so R (.530 max, rear face to the outer face of the terminal hardware) is not checked.",
    "The auxiliary switch on the rear face of pole 1 with its C, NO and NC double turret solder terminals (note 9), which the figure draws but does not dimension.",
    "The handle's 33\u00b0 \u00b15\u00b0 down position, the handle paddle shapes, the curved side profile of the boss, the narrower top and lobed bottom of the case, every drawn corner radius and the internal mechanism.",
    "Thread forms, on-off marking, materials and plating, the Table I ratings and impedances, the Table II trip times and the Table III substitution data, which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 9a6eae379cdb.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,254 of 1,309 items agreed. All 37 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "263 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 7 tables (501 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "3 solids in STEP AP242. 87 of 87 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision C Notice 2 - Validation, 10 October 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-C-55629/17C",
   "slug": "mil-c-55629-17c",
   "title": "Circuit breakers, magnetic, unsealed, trip-free, three pole, front mounted auxiliary contacts (1 to 100 amperes)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-C-55629_17C Circuit breakers, magnetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 4,
   "dimensions": 140,
   "dimensions_met": 140,
   "kind": "Military specification sheet",
   "dated": "3 April 2010",
   "status": "Inactive, 10 October 2024",
   "newest": "Revision C Notice 2 - Validation, 10 October 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 3,
   "by_class": {
    "Los Angeles": 3
   },
   "stock_examples": [
    "5925-01-497-1625, circuit breaker, M55629/17HQHQHQ (Los Angeles)",
    "5925-01-497-1928, circuit breaker, M55629/17CQCQCQ (Los Angeles)",
    "5925-01-497-1930, circuit breaker, M55629/17NQNQNQ (Los Angeles)"
   ],
   "files": {
    "package": "MIL-C-55629_17C package.pdf",
    "scan": "MIL-C-55629_17C legacy scan.pdf",
    "clean": "MIL-C-55629_17C clean copy.pdf",
    "record": "MIL-C-55629_17C validation record.pdf",
    "sheet": "MIL-C-55629_17C 3D model.pdf",
    "parts": "MIL-C-55629_17C parts list.pdf",
    "inspection": "MIL-C-55629_17C inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M55629_17LKMKMK-freecad.png",
    "pair": "Models/views/M55629_17LKMKMK-pair.png",
    "record": "Models/views/M55629_17LKMKMK-record.png",
    "front": "Models/views/M55629_17LKMKMK-front.png",
    "top": "Models/views/M55629_17LKMKMK-top.png",
    "right": "Models/views/M55629_17LKMKMK-right.png",
    "cut": "Models/views/M55629_17LKMKMK-cut.png"
   },
   "shown_part": "M55629/17LKMKMK",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the four terminal arrangements that every M55629/17 PIN falls into (0-50 A or 51-100 A studs by pole, poles in ascending rating), each at one representative PIN: the A by S by L case with six No. 6 mounting inserts, the full-width actuator boss, three tied handles thrown 30\u00b0, the two pole barriers out to T and K, and six rear terminal studs.",
   "not_modeled": [
    "Every other PIN: each pole takes one of 144 current and delay codes (Tables I and II), giving over 500,000 PINs, but only the stud size of each pole changes the outline, so one representative PIN stands for each of the four arrangements.",
    "The loose terminal hardware of notes 4, 5, 6 and 10: two hex nuts per stud (.190-32 UNF-2B, .308 \u00b1.005 across flats, .109 \u00b1.010 thick; or .250-20 UNC-2B, .438 or .375 \u00b1.016 across flats, .156 \u00b1.016 thick), the tooth lockwasher, the flat washer (.370 OD, .197 ID, .032 thick; or .500 OD, .281 ID, .035 thick) and the split lockwasher; so R (.530 max, rear face to the outer face of the terminal hardware) is not checked.",
    "The auxiliary switch on the rear face of pole 1 with its C, NO and NC double turret solder terminals (note 9), which the figure draws but does not dimension.",
    "The handle's 33\u00b0 \u00b15\u00b0 down position, the handle paddle shapes, the curved side profile of the boss, the narrower top and lobed bottom of the case, every drawn corner radius and the internal mechanism.",
    "Thread forms, on-off marking, materials and plating, the Table I ratings and impedances, the Table II trip times and the Table III substitution data, which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 45ad61829098.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,262 of 1,311 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "263 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 7 tables (496 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 140 of 140 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision C Notice 2 - Validation, 10 October 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 prints U both as the rear-view terminal column pitch and as the side-view distance from the lower stud to the bottom of the case, with one table row (.996 to 1.056); with S, P and U at their middles the upper studs sit .177 below the top of the case, where the figure draws them about .45 down, so an engineer must confirm the side-view letter."
   ]
  },
  {
   "id": "MIL-C-85049/18B",
   "slug": "mil-c-85049-18b",
   "title": "Connector accessories, electrical, backshell, environmental, straight, RFI/EMI, category 2B (for MIL-C-38999 series III and IV connectors)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-C-85049_18B Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 276,
   "dimensions": 2484,
   "dimensions_met": 2484,
   "kind": "Military specification sheet",
   "dated": "1 October 1984",
   "status": "Canceled, 19 June 2003",
   "newest": "Revision B Notice 2 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/18",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-01-725-1691, backshell, electrical connector, MIL-C-85049/18 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-C-85049_18B package.pdf",
    "scan": "MIL-C-85049_18B legacy scan.pdf",
    "clean": "MIL-C-85049_18B clean copy.pdf",
    "record": "MIL-C-85049_18B validation record.pdf",
    "sheet": "MIL-C-85049_18B 3D model.pdf",
    "parts": "MIL-C-85049_18B parts list.pdf",
    "inspection": "MIL-C-85049_18B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85049_1817W04A-freecad.png",
    "pair": "Models/views/M85049_1817W04A-pair.png",
    "record": "Models/views/M85049_1817W04A-record.png",
    "front": "Models/views/M85049_1817W04A-front.png",
    "top": "Models/views/M85049_1817W04A-top.png",
    "right": "Models/views/M85049_1817W04A-right.png",
    "cut": "Models/views/M85049_1817W04A-cut.png"
   },
   "shown_part": "M85049/1817W04A",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of every MIL-C-85049/18B straight environmental RFI/EMI backshell part number (shell sizes 9 to 25, each permitted clamp size, length codes Standard, A, B and C, finishes N and W): coupling ring at A max, adapter body over the Table III LENGTH, and cable clamp at X max and Y max with a cable passage at the clamp's largest cable.",
   "not_modeled": [
    "The MIL-C-38999 series III and IV coupling interface and thread, the O-ring, grommet, knurl and marking.",
    "The two-piece saddle clamp bars, fillister head screws and lockwashers, the clamp's closure to the minimum cable and the three .020 safety wire holes.",
    "Finishes N and W do not change geometry; each pair of part numbers shares one solid shape."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 f49455882fc7.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "370 of 387 items agreed. All 5 differences were settled against the page image. A second pass settled 1 from another revision.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "33 checks on size series and limits. None failed. 39 values are also printed on 9 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 3 tables (98 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "276 solids in STEP AP242. 2,484 of 2,484 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 2 - Cancellation, 19 June 2003. ASSIST also holds Revision B Amendment 1 (30 July 1997). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 and tables I to III dimension the coupling ring only by its maximum diameter A and give no adapter body diameter, so the solids scale a .65 inch ring length and a body diameter of .78 of A from the drawing. An engineer must take both from a qualified source's drawing before the solids are used for fit or clearance; the coupling interface itself is set by MIL-C-38999 series III and IV, as the requirements on page 4 state."
   ]
  },
  {
   "id": "MIL-C-85049/42A",
   "slug": "mil-c-85049-42a",
   "title": "Connector accessories, electrical, nonenvironmental, strain relief, straight, category 4A (for MIL-C-5015 solder type, V thread of MS310X classes A, B, C or K connectors)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-C-85049_42A Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 10,
   "dimensions": 330,
   "dimensions_met": 330,
   "kind": "Military specification sheet",
   "dated": "30 November 1990",
   "status": "Canceled, 19 June 2003",
   "newest": "Revision A Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/42",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-01-498-1847, clamp, cable, electrical connector, M85049/42-32DW (Los Angeles)"
   ],
   "files": {
    "package": "MIL-C-85049_42A package.pdf",
    "scan": "MIL-C-85049_42A legacy scan.pdf",
    "clean": "MIL-C-85049_42A clean copy.pdf",
    "record": "MIL-C-85049_42A validation record.pdf",
    "sheet": "MIL-C-85049_42A 3D model.pdf",
    "parts": "MIL-C-85049_42A parts list.pdf",
    "inspection": "MIL-C-85049_42A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85049_42-16D-freecad.png",
    "pair": "Models/views/M85049_42-16D-pair.png",
    "record": "Models/views/M85049_42-16D-record.png",
    "front": "Models/views/M85049_42-16D-front.png",
    "top": "Models/views/M85049_42-16D-top.png",
    "right": "Models/views/M85049_42-16D-right.png",
    "cut": "Models/views/M85049_42-16D-cut.png"
   },
   "shown_part": "M85049/42-16D",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the ten MIL-C-85049/42A straight strain reliefs, -4D to -32D, assembled as Figure 1 draws them: the knurled coupling nut with the A thread, the body with its two rails and safety wire holes, the two saddle halves closed on the rail stems with the stem heads, and the two telescoping screws.",
   "not_modeled": [
    "The H min end of the wire bundle range: the sheet does not define the saddle shape or the travel that closes the halves on the smallest bundle (note 6), so the solids show only the H max passage.",
    "Thread forms (the A thread and the #4-40, #6-32 and #8-32 UNC-2 threads inside the telescoping screws, with note 4's partial engagement when closed), the knurl, the marking, the screw slots and the MS35333 or MS35338 lockwashers.",
    "Detail A, the optional stainless steel clamp of requirement 3b; the solids carry the Table I values that limit it.",
    "Finish codes N, W, B and S (Table II), which do not change geometry; one solid per dash number."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, all scanned. SHA-256 6742a65c894f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "710 of 725 items agreed. All 14 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "291 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 5 tables (336 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "10 solids in STEP AP242. 330 of 330 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 1 - Cancellation, 19 June 2003.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table I gives the A thread as class 2A, an external thread class, while Figure 1 points A THD at the coupling nut's internal thread; an engineer must confirm the class of the nut thread (2B mates with the class 2A connector thread)."
   ]
  },
  {
   "id": "MIL-C-85049/52C",
   "slug": "mil-c-85049-52c",
   "title": "Connector accessories, electrical, strain relief, nonenvironmental, self-locking and non-self-locking, straight, category 4B (for MIL-C-5015 crimp, MIL-C-26482 series 2, MIL-C-81703 series 3, and MIL-C-83723 series III connectors)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-C-85049_52C Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 96,
   "dimensions": 1401,
   "dimensions_met": 1401,
   "kind": "Military specification sheet",
   "dated": "30 November 1990",
   "status": "Canceled, 19 June 2003",
   "newest": "Revision C Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/52",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-01-498-1843, clamp, cable, electrical connector, M85049/52S40W (Los Angeles)"
   ],
   "files": {
    "package": "MIL-C-85049_52C package.pdf",
    "scan": "MIL-C-85049_52C legacy scan.pdf",
    "clean": "MIL-C-85049_52C clean copy.pdf",
    "record": "MIL-C-85049_52C validation record.pdf",
    "sheet": "MIL-C-85049_52C 3D model.pdf",
    "parts": "MIL-C-85049_52C parts list.pdf",
    "inspection": "MIL-C-85049_52C inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85049_52-1-24W-freecad.png",
    "pair": "Models/views/M85049_52-1-24W-pair.png",
    "record": "Models/views/M85049_52-1-24W-record.png",
    "front": "Models/views/M85049_52-1-24W-front.png",
    "top": "Models/views/M85049_52-1-24W-top.png",
    "right": "Models/views/M85049_52-1-24W-right.png",
    "cut": "Models/views/M85049_52-1-24W-cut.png"
   },
   "shown_part": "M85049/52-1-24W",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of every MIL-C-85049/52C part number (17 non-self-locking and 15 self-locking dash numbers, each in finishes N, W and A: 96 part numbers): coupling nut of diameter A and length R with the connector bore ending at the tooth root face, follower ears U thick, and the two clamp bars G by S by T with round saddles that pass the F maximum bundle, overall length L.",
   "not_modeled": [
    "The coupling thread, anti-rotation teeth and other interface dimensions, which requirement 1b places in MIL-C-85049 figure 4; the tooth root is a flat face.",
    "The two fillister head screws (MS35275 or AN500D) with MS35338 lock washers, or self-locking screws, with their length W, size and washer dash number, which their own standards define, and the screw holes.",
    "The tapered strain relief section that figure 1 draws between the coupling nut and the clamp, which carries no dimensions.",
    "The self-locking mechanism, the knurl and its .125 maximum setback from the nut front face, the optional marking, and the edge breaks that requirement 1d calls for.",
    "The F minimum, which note 4 makes a wire bundle size rather than a clamp hardware limit, and the clamp's closure on bundles smaller than the F maximum.",
    "The captive, free-turning coupling nut as a separate part: nut, follower and clamp are one solid. Finishes N, W and A share one geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 cd6043794cb4.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,088 of 1,100 items agreed. All 12 differences were settled against the page image. A second pass settled 1 from a closer look at the page.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "607 checks on size series and limits. 17 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 6 tables (720 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "96 solids in STEP AP242. 1,401 of 1,401 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 1 - Cancellation, 19 June 2003.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Note 5 says M runs from the root of the tooth to the back of the coupling nut, but figure 1 draws M to the rear end of the clamp, where L ends, every M max exceeds R max, and L minus M is the same within each nut size (.26 to .265 and .42 to .43, self-locking .31 and .47); the solids measure M to the rear end, and the engineer should confirm the note's wording."
   ]
  },
  {
   "id": "MIL-C-85049/65B",
   "slug": "mil-c-85049-65b",
   "title": "Connector accessories, electrical, strain reliff, split 90\u00b0, category 4C (for MIL-C-38999 series I and II connectors)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-C-85049_65B Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 18,
   "dimensions": 216,
   "dimensions_met": 216,
   "kind": "Military specification sheet",
   "dated": "19 December 1989",
   "status": "Canceled, 19 June 2003",
   "newest": "Revision B Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/65",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-01-498-4647, clamp, cable, electrical connector, M85049/65-14W (Los Angeles)"
   ],
   "files": {
    "package": "MIL-C-85049_65B package.pdf",
    "scan": "MIL-C-85049_65B legacy scan.pdf",
    "clean": "MIL-C-85049_65B clean copy.pdf",
    "record": "MIL-C-85049_65B validation record.pdf",
    "sheet": "MIL-C-85049_65B 3D model.pdf",
    "parts": "MIL-C-85049_65B parts list.pdf",
    "inspection": "MIL-C-85049_65B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85049_65-16W-freecad.png",
    "pair": "Models/views/M85049_65-16W-pair.png",
    "record": "Models/views/M85049_65-16W-record.png",
    "front": "Models/views/M85049_65-16W-front.png",
    "top": "Models/views/M85049_65-16W-top.png",
    "right": "Models/views/M85049_65-16W-right.png"
   },
   "shown_part": "M85049/65-16W",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 18 MIL-C-85049/65B split 90 degree strain reliefs (accessory shell sizes 8 to 24, finishes N and W), each one solid of coupling nut, split ring with captive screw, adapter body turning down into a leg, and closed saddle bar clamp with its two screws, sized to Table I.",
   "not_modeled": [
    "The coupling thread and accessory interface, which follow MIL-C-38999 series I and II and are not dimensioned on the sheet.",
    "The split between the clamp halves, the separate parts (coupling nut, ring, clamp, saddle bars, screws) and the fit that lets the nut turn: each part number is one fused envelope solid.",
    "The clamp opened to K max and a passage through the body for bundles larger than K min: the solids show the clamp closed, and K max is checked from how far the screw ends stand out beyond -BB-.",
    "The saddle profile and edge breaks (the sheet requires clamps without protrusions or sharp edges that may pinch the cable), screw slots and drilled heads, knurl, ribs, marking, the optional second boss and the .020 safety wire holes (location optional).",
    "Finishes N and W differ only in plating, so both part numbers of a size have the same solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, all scanned. SHA-256 b108d6a3a50b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "517 of 549 items agreed. All 19 differences were settled against the page image. A second pass settled 1 from another revision. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "124 checks on size series and limits. 2 breaks checked against the scan: all are as printed. A later review settled 1 printed value from the document's own conversions.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (229 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "18 solids in STEP AP242. 216 of 216 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 1 - Cancellation, 19 June 2003. ASSIST also holds Revision B Amendment 1 (30 July 1997). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. The table on page 3, column 'mm': 33.32 then 33.3. Page 3 prints 1 312 33 32 and then 1.35 33.3 at the head of the fourth Inches/mm pair, with clear digits, as agreed (crops/asm-the table on page 3-fourth-pair-1.35.png). The printed mm value itself looks wrong for its series: 1.35 inch is 34.29 mm, and Table I prints 1.35 (34.2) for H of size 18, so 33.3 is probably a typing error for 34.3. Point for an engineer.",
    "Model. Table I prints K max .634 (15.60) for size 16 and .614 (16.10) for size 18, but 15.60 mm is .614 inch and 16.10 mm is .634 inch, and the drop from .634 to .614 is the only fall in the column; the solids use the inch values, and the engineer must decide whether the K max values of sizes 16 and 18 are transposed.",
    "Model. Table I prints K min .481 (10.62) for size 24, but 10.62 mm is .418 inch, a step of .037 from size 22 like the earlier steps of .018 to .070, while .481 is a step of .100; the page 3 conversion list gives .481 as 12.21 mm. The solid uses .481, and the engineer must confirm it."
   ]
  },
  {
   "id": "MIL-DTL-15291/2D",
   "slug": "mil-dtl-15291-2d",
   "title": "Switches, rotary, snap action class 1SR front mounted, side connected",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-15291_2D Switches, rotary",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 20,
   "solids": 82,
   "dimensions": 1156,
   "dimensions_met": 1156,
   "kind": "Detail specification sheet",
   "dated": "21 August 2026",
   "status": "Active, 21 August 2026",
   "newest": "Revision D, 21 August 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5930-01-510-2510, switch, rotary, M15291/2-040 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-15291_2D package.pdf",
    "scan": "MIL-DTL-15291_2D legacy scan.pdf",
    "clean": "MIL-DTL-15291_2D clean copy.pdf",
    "record": "MIL-DTL-15291_2D validation record.pdf",
    "sheet": "MIL-DTL-15291_2D 3D model.pdf",
    "parts": "MIL-DTL-15291_2D parts list.pdf",
    "inspection": "MIL-DTL-15291_2D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M15291_2-044-freecad.png",
    "pair": "Models/views/M15291_2-044-pair.png",
    "record": "Models/views/M15291_2-044-record.png",
    "front": "Models/views/M15291_2-044-front.png",
    "top": "Models/views/M15291_2-044-top.png",
    "right": "Models/views/M15291_2-044-right.png",
    "cut": "Models/views/M15291_2-044-cut.png"
   },
   "shown_part": "M15291/2-044",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of 80 of the 82 class 1SR switches, each with its handle, shaft, bushing or four-hole bracket, body and terminal block at the table's X and Y, and the two brass pieces of the panel seal kit.",
   "not_modeled": [
    "M15291/2-063 and -064, whose DIM X cells are blank.",
    "The individual .250 spacers, the stepped housing behind the mounting face, the section rods and their nuts (1.500 apart in figure 1), and the rear support of figure 5 detail D.",
    "The terminal screws (.125-40 UNC-2A x 0.250 round head, .164-32 UNC-2A binding head in figure 4), the terminal tabs and their markings.",
    "The panel nuts (.125 thick in figure 1, .156 in figure 2), the locking ring and its tab, and the internal shakeproof washer, whose across-flats sizes are not given.",
    "The panel drilling of figure 5 details A to C and of figure 8, which define the panel, not the switch.",
    "The handle's own outline (M15291/1-100 per MIL-DTL-15291/1), the kit's sealing screws and boot (M5423/09-04), the mounting screws, and the .010 corner breaks of the kit piece.",
    "Switching characteristics, operating torque, ratings and the zinc and dichromate finish."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "20 pages, 9 scanned. SHA-256 799f8f4cc12b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,429 of 2,226 items agreed. 49 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "574 checks on size series and limits. 34 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 9 tables (2,872 cells), 8 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "82 solids in STEP AP242. 1,156 of 1,156 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D, 21 August 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table I, row -078, column NO 2: read as 1, FIGS 4, 5C, 4, 3, 2, could be 1, FIGS 4, 5C, 3, 2.",
    "Printed value to confirm. Table I, row '-030': 3.437 then 1. The row compares DIM X with the first terminal number in the NO 2 circuit column, two different quantities; Page 7 prints 3.437 and 1. The printed 3.437 itself looks wrong for its series: every other Fig 4 dash number is .062 longer than its Fig 3 partner, which would give 3.562 after -029 at 3.500.",
    "Printed value to confirm. Table I, column 'Dim \"X\"': 2.5 then 2.437. Page 11 prints 2.500 for -059 and 2.437 for -060. The printed 2.437 itself looks wrong for its series: every other Fig 4 dash number is .062 longer than its Fig 3 partner (-061 3.000, -062 3.062), which would give 2.562.",
    "Model. M15291/2-063 and -064 print no DIM X and no torque, so their body length is not given and they are not built.",
    "Model. M15291/2-076 to -078 have empty DETAIL REF cells and -077 a blank DIM X cell; the 'FIGS 4, 5C' and the 2.312 printed inside their NO 2 and NO 3 drawing cells are taken as their figure and as -077's X, which should be confirmed.",
    "Model. Some figure 4 rows print DIM X .125 shorter than other figure 4 rows with the same torque and number of spacer locations (-030 3.437 against -047's 3.562, -060 2.437 against -012's 2.562, -070 2.437 against -012's 2.562, -074 1.437 against -004's 1.562); confirm which is meant.",
    "Model. M15291/2-042 prints DIM Y .375, while every other figure 4 row prints .437."
   ]
  },
  {
   "id": "MIL-DTL-15303T(SH) w/AMENDMENT 1",
   "slug": "mil-dtl-15303t-sh-w-amendment-1",
   "title": "Audible signals: alarms, bells, buzzers, horns, and sirens, electronic, shipboard",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-15303T(SH) w_AMENDMENT 1 Audible signals-alarms, bells",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 34,
   "solids": 46,
   "dimensions": 573,
   "dimensions_met": 573,
   "kind": "Detail specification",
   "dated": "28 April 2020",
   "status": "Active, 27 February 2025",
   "newest": "Revision T Notice 1 - Validation, 27 February 2025",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6350-00-548-0005, bell, electrical, M15303-IC/B3S4 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-15303T(SH) w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-15303T(SH) w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-15303T(SH) w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-15303T(SH) w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-15303T(SH) w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-15303T(SH) w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-15303T(SH) w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 10, page 31",
   "pictures": {
    "iso": "Models/views/M15303-IC_H1S4-freecad.png",
    "pair": "Models/views/M15303-IC_H1S4-pair.png",
    "record": "Models/views/M15303-IC_H1S4-record.png",
    "front": "Models/views/M15303-IC_H1S4-front.png",
    "top": "Models/views/M15303-IC_H1S4-top.png",
    "right": "Models/views/M15303-IC_H1S4-right.png",
    "cut": "Models/views/M15303-IC_H1S4-cut.png"
   },
   "shown_part": "M15303-IC/H1S4",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 46 signal types that Table II links to Figures 1 to 12, one per type and the same solid for every type of one figure: each signal's outline, case, gong, cover, horn, projector or panel at the figure's values, with its mounting holes drilled where the figure puts them.",
   "not_modeled": [
    "Types H6, H6N, H7, H7N, E3D2: Table II gives them no figure, so the document fixes no shape for them.",
    "The gong mechanism, flag relay, test button, coils, motors, diaphragms, electronics, nameplates, screws, nuts, grilles and the internal passages of the horns and projectors, which the figures draw but do not dimension.",
    "The true shapes inside each envelope: the curl of the Figure 8 horn, the bracket, housing and horn of Figure 7, the flare of the projectors and horns, the dome of the gongs and siren grille, and every drawn corner radius.",
    "The Figure 12 mounting templates as bulkhead preparation: the 1 wide, 1/16 deep notch of the cutout with housing, its four #9 (.196) holes on 3-1/4 by 5 centres, and the cutout without housing (5 high, 1-3/16R corners) with its four #9 holes on 3-1/2 by 4-3/8 centres.",
    "The three spacer bosses of note 2 on Figures 8 to 10 (3/4 O.D. by 1/2 long, 3/8-16 tapped), which the installing activity furnishes and welds to the bulkhead.",
    "Acoustic output, frequency, enclosure, electrical, environmental and test requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "34 pages, 0 scanned. SHA-256 ca05ce91ff48.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "8,188 of 8,254 items agreed. 34 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "142 checks on size series and limits. 13 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "32 pages of searchable text, 14 tables (601 cells), 12 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "46 solids in STEP AP242. 573 of 573 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision T Notice 1 - Validation, 27 February 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 3, callout on the nameplate, second line: read as VOLTS 115 HZ 60 AMPS .18, could be VOLTS 115 HZ 60 AMPS .19.",
    "Model. Figure 7 gives no diameter for its three mounting holes and does not place the 6-3/8 triangle within the 9-1/4 by 9-1/4 outline; the model uses 13/32 holes and centres the triangle.",
    "Model. The Figure 7 caption lists H2S4 where Table II and 3.8.5 assign H3S4 to Figure 7 and H2S4 to Figure 8; the models follow Table II.",
    "Model. Figure 1 marks 8-1/8, 5 and 5-13/16 with an asterisk that no note on the page explains; the models treat them as maximums under note 1.",
    "Model. Figure 8 note 2 prints the spacer bolt circle as 6-5/8-16 diameter; the model reads 6-5/8, twice the 3-5/16 hole circle radius."
   ]
  },
  {
   "id": "MIL-DTL-15743/8E",
   "slug": "mil-dtl-15743-8e",
   "title": "Switches, rotary, enclosed, submersible (15 feet), snap action, 500 volts alternating CURRENT/250 volts direct current, 30 ampere, symbols 838.1 (dpdt), 840.1 (dpdt), and 851 (tpst)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-15743_8E Switches, rotary",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 11,
   "solids": 5,
   "dimensions": 44,
   "dimensions_met": 43,
   "kind": "Detail specification sheet",
   "dated": "6 November 2023",
   "status": "Active, 6 November 2023",
   "newest": "Revision E, 6 November 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5930-01-245-9532, switch, rotary, M15743/8-003 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-15743_8E package.pdf",
    "scan": "MIL-DTL-15743_8E legacy scan.pdf",
    "clean": "MIL-DTL-15743_8E clean copy.pdf",
    "record": "MIL-DTL-15743_8E validation record.pdf",
    "sheet": "MIL-DTL-15743_8E 3D model.pdf",
    "parts": "MIL-DTL-15743_8E parts list.pdf",
    "inspection": "MIL-DTL-15743_8E inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MIL-DTL-15743_8_item_09_coupler-freecad.png",
    "pair": "Models/views/MIL-DTL-15743_8_item_09_coupler-pair.png",
    "record": "Models/views/MIL-DTL-15743_8_item_09_coupler-record.png",
    "front": "Models/views/MIL-DTL-15743_8_item_09_coupler-front.png",
    "top": "Models/views/MIL-DTL-15743_8_item_09_coupler-top.png",
    "right": "Models/views/MIL-DTL-15743_8_item_09_coupler-right.png",
    "cut": "Models/views/MIL-DTL-15743_8_item_09_coupler-cut.png"
   },
   "shown_part": "MIL-DTL-15743/8 item 09 coupler",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the five parts of the M15743/8 switches whose shape the sheet fixes by printed values, one size for all three dash numbers: the handle (item 06, figure 4), the shaft (08, figure 6), the coupler (09, figure 7), the coupler plate (10, figure 8, on -001 and -002 only) and the identification plate (17, figure 11) as a plain disc envelope.",
   "not_modeled": [
    "The three enclosed switches M15743/8-001 to -003 as assemblies: figure 1 gives only the 6.75 REF flange and the 5.00 APPROX. height, the box and cover of figures 2 and 3 (enclosure MIL-E-24142/5, M24142/5-003 modified) give only the 3.75 inside reference depth and the .376/.374 gland bore, and figure 9's mounting pattern (three holes for .38 bolts on a 6.62 circle) is marked reference.",
    "The shaft assembly (item 07, figure 5), which brazes the shaft into the coupler and carries no dimensions; the O-ring (05), the switch units (14 to 16, MIL-DTL-15291/7) and the wiring diagrams (11 to 13).",
    "The handle's counterbore .12 deep for the .138-32 UNC-2A round head screw, which has no diameter, and the small rounds where its boss steps down below the arms.",
    "The .005 R and .03 R radii of the shaft's groove detail and the thread form of its .138-32 UNC-2B tapped hole.",
    "The coupler's .02 RAD inside corners and the rounded outside corners its figure draws without a size.",
    "The identification plate's center hole, its four crossed-square marks and its lettering (NSN, M15743/8-, symbol, manufacturer's identification, rating and switch action).",
    "The materials of table II, the 125 and 32 surface finish marks, the 5 pound maximum weight and the electrical and submersion requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "11 pages, 7 scanned. SHA-256 e24046bff72d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "521 of 549 items agreed. All 19 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "42 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 2 tables (137 cells), 11 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "5 solids in STEP AP242. 43 of 44 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E, 6 November 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. On the shaft (figure 6), .62, .08 and .14 from the flatted end put the end of the land below the groove at .84, but .50 and .38 put it at .88, as does the .94 overall length less the .06 pilot, so the solid ends the land at .88 and its land measures .18 against the printed .14; an engineer must decide which value gives way.",
    "Model. Figure 6 prints .025 for the diameter of the .06 long pilot at the coupler end, but draws the pilot as wide as the .264/.262 groove, and figure 5 draws it brazed in the coupler's .26 drilled hole (figure 7); the solid carries .025 as printed, and an engineer must decide whether .250 is meant.",
    "Model. Figure 4 counterbores the handle's .141 screw hole .12 deep for the .138-32 UNC-2A round head screw but gives neither the counterbore diameter nor the height of the hole, so the solid has the drill alone, at mid-height of the .50 boss where the figure draws it.",
    "Model. Figure 11 draws a center hole and four crossed-square marks on the identification plate without sizes or positions, so the solid is a plain 4.50 by .06 disc, and an engineer must supply the hole and the fastening points."
   ]
  },
  {
   "id": "MIL-DTL-18396E",
   "slug": "mil-dtl-18396e",
   "title": "Switches, meter and control, naval shipboard",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-18396E Switches, meter and control",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 11,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "15 April 2014",
   "status": "Canceled, 28 May 2020",
   "newest": "Revision E Notice 1 - Cancellation, 28 May 2020",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5930-01-510-2516, switch, rotary, MIL-S-18396 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-18396E package.pdf",
    "scan": "MIL-DTL-18396E legacy scan.pdf",
    "clean": "MIL-DTL-18396E clean copy.pdf",
    "record": "MIL-DTL-18396E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "11 pages, 0 scanned. SHA-256 57feaae2382d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,850 of 5,856 items agreed. All 11 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "164 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "14 pages of searchable text, 2 tables (331 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-18396E is a detail specification for rotary High-Impact shockproof meter and control switches for Naval shipboard use that sets types, circuitry, materials, silver facing thickness, spacings, electrical, shock, vibration and endurance performance and the first article and conformance inspections in Tables I and II, and under 3.10 leaves every outline and length dimension to the manufacturer's drawings, so it fixes no part shape by dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 1 - Cancellation, 28 May 2020.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-21097H w/AMENDMENT 3",
   "slug": "mil-dtl-21097h-w-amendment-3",
   "title": "Connectors, electrical, printed wiring board, general purpose general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-21097H w_AMENDMENT 3 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 30,
   "solids": 168,
   "dimensions": 1512,
   "dimensions_met": 1512,
   "kind": "Detail specification",
   "dated": "27 July 2023",
   "status": "Active, 27 July 2023",
   "newest": "Revision H Amendment 3 (all previous amendments incorporated), 27 July 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-00-089-4440, connector, receptacle, electrical, MIL-C-21097 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-21097H w_AMENDMENT 3 package.pdf",
    "scan": "MIL-DTL-21097H w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MIL-DTL-21097H w_AMENDMENT 3 clean copy.pdf",
    "record": "MIL-DTL-21097H w_AMENDMENT 3 validation record.pdf",
    "sheet": "MIL-DTL-21097H w_AMENDMENT 3 3D model.pdf",
    "parts": "MIL-DTL-21097H w_AMENDMENT 3 parts list.pdf",
    "inspection": "MIL-DTL-21097H w_AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 3, page 23",
   "pictures": {
    "iso": "Models/views/MIL-DTL-21097_fig_4_gage_size_2_06_positions_.050_spacing-freecad.png",
    "pair": "Models/views/MIL-DTL-21097_fig_4_gage_size_2_06_positions_.050_spacing-pair.png",
    "record": "Models/views/MIL-DTL-21097_fig_4_gage_size_2_06_positions_.050_spacing-record.png",
    "front": "Models/views/MIL-DTL-21097_fig_4_gage_size_2_06_positions_.050_spacing-front.png",
    "top": "Models/views/MIL-DTL-21097_fig_4_gage_size_2_06_positions_.050_spacing-top.png",
    "right": "Models/views/MIL-DTL-21097_fig_4_gage_size_2_06_positions_.050_spacing-right.png",
    "cut": "Models/views/MIL-DTL-21097_fig_4_gage_size_2_06_positions_.050_spacing-cut.png"
   },
   "shown_part": "MIL-DTL-21097 fig 4 gage, size 2, 06 positions, .050 spacing",
   "application": "FreeCAD 1.1.4",
   "modeled": "The steel test gages of MIL-DTL-21097: 27 figure 3 type A and AD individual contact gages (nominal, maximum and minimum thickness A for board sizes 2, 3 and 4, each at the three blade widths B), and 141 figure 4 edge connector mechanical gages (every number of positions at .050, .100, .125 and .156 contact spacing, each with section C for board sizes 2, 3 and 4).",
   "not_modeled": [
    "The connectors themselves (types A, AD, CR and CS), whose bodies, contacts and mounting the M21097 specification sheets dimension.",
    "The figure 2 printed wiring test board: its width follows the contact count of the connector under test (note 4), its length the 4.00 it extends beyond the receptacle (note 3), and its outline, pad length and copper thickness are not dimensioned.",
    "The figure 1 contact mating areas, the figure 5 bond strength fixture and the figure 6 and 7 test circuits, which carry no part dimensions.",
    "The gage for Test II (4.6.6.1.2), whose dimensions are left to the specification sheet (see 3.1).",
    "The 4 microinch surface finish to .375 from the end, the steel material and any marking."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "30 pages, 2 scanned. SHA-256 6cc5d9886d33.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "9,102 of 9,189 items agreed. All 45 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "282 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "31 pages of searchable text, 22 tables (791 cells), 9 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "168 solids in STEP AP242. 1,512 of 1,512 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 3 (all previous amendments incorporated), 27 July 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 4 gives A = .742 for 15 positions at .050 spacing, but the metric equivalents under the figure list .792 (20.12) and no .742, and the column otherwise grows .050 per position, which also gives .792; the solids use .742.",
    "Model. The .156 spacing column of the figure 4 A table prints its tolerance as \u00b1.156 (1.070 \u00b1.156), a full contact pitch, where the other columns print \u00b1.003 to \u00b1.010.",
    "Model. Figure 4 gives 6.771 for 43 positions at .156 spacing, .071 short of the 6.842 that the column's .156 step gives, and the metric equivalents do not list 6.771.",
    "Model. Figure 4 gives 2.660 for 20 positions at .125 spacing, .060 more than the 2.600 that the column's .125 step gives; the metric equivalents repeat 2.660 (67.56).",
    "Model. Table IV and figure 2 list .075 contact spacing, but figure 3 gives no blade width B for it and figure 4 gives no A for .075 or .200 spacing.",
    "Model. The figure 2 leading edge chamfer, .019 deep at 30 degrees to the board face, is .033 long at those values, over the .032 MAX printed for its length."
   ]
  },
  {
   "id": "MIL-DTL-21097/4G w/AMENDMENT 2",
   "slug": "mil-dtl-21097-4g-w-amendment-2",
   "title": "Connectors, electrical, printed wiring board composite, receptacle, contact spacing (.200) alternate dual row, type CR",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-21097_4G w_AMENDMENT 2 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 40,
   "dimensions": 1100,
   "dimensions_met": 1100,
   "kind": "Detail specification sheet",
   "dated": "4 January 2022",
   "status": "Active, 4 January 2022",
   "newest": "Revision G Amendment 2 (all previous amendments incorporated), 4 January 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-00-089-4440, connector, receptacle, electrical, M21097/4-01 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-21097_4G w_AMENDMENT 2 package.pdf",
    "scan": "MIL-DTL-21097_4G w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-DTL-21097_4G w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-DTL-21097_4G w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-DTL-21097_4G w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-DTL-21097_4G w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-DTL-21097_4G w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M21097_4-20-freecad.png",
    "pair": "Models/views/M21097_4-20-pair.png",
    "record": "Models/views/M21097_4-20-record.png",
    "front": "Models/views/M21097_4-20-front.png",
    "top": "Models/views/M21097_4-20-top.png",
    "right": "Models/views/M21097_4-20-right.png",
    "cut": "Models/views/M21097_4-20-cut.png"
   },
   "shown_part": "M21097/4-20",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid for each of the 40 dash numbers M21097/4-01 to -40: the insulator body (17, 23, 29, 35 or 41 contact positions) with its card slot, contact face, contact windows and barriers, polarizing cavities, mounting holes and underside recess, fused with the class a eyelet or class b plug-in terminal tails.",
   "not_modeled": [
    "The contacts inside the body, so the .125 \u00b1.005 spacing between the even and odd contact rows and the .079 from the odd row to the slot wall are not carried as surfaces; they place the terminal rows and the .125 holes only.",
    "The underside barriers between terminals, whose shape note 5 leaves optional.",
    "The rounded body corners, the curved relief and steps around the mounting holes at each end, and the step in the slot floor beyond the end contacts that the top view draws without dimensions.",
    "Contact position numbering (note 4), the gold over nickel finish, the M21097/11 polarizing keys and the MIL-DTL-21097/5 mating male adapters."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 eea76a85f6a1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "932 of 938 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "126 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 4 tables (434 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "40 solids in STEP AP242. 1,100 of 1,100 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Amendment 2 (all previous amendments incorporated), 4 January 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The document gives no length for the class b plug-in pin below the E shoulder; the solids end it .326 below the mounting flange.",
    "Model. The terminal rows are located only by their .150 spacing; their position across the body width, which sets the board hole pattern, is not dimensioned.",
    "Model. The two .125 holes have no dimension along the length.",
    "Model. The detail measures board guide A from a face .020 behind the barrier tips, but nothing ties that face to the .116 and .079 slot wall line of the top view; if A runs from the slot wall instead, the cavity bottom moves .020 farther from the slot."
   ]
  },
  {
   "id": "MIL-DTL-23071D",
   "slug": "mil-dtl-23071d",
   "title": "Blowers, miniature, for cooling electronic equipment general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-23071D Blowers, miniature",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 17,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "9 November 2022",
   "status": "Active, 9 November 2022",
   "newest": "Revision D, 9 November 2022",
   "superseding": "",
   "preparing_activity": "DLA Troop Support - Construction and Equipment Items of Supply Standardizat",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "4140-01-163-6009, fan, tubeaxial, MIL-B-23071 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-23071D package.pdf",
    "scan": "MIL-DTL-23071D legacy scan.pdf",
    "clean": "MIL-DTL-23071D clean copy.pdf",
    "record": "MIL-DTL-23071D validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "17 pages, 0 scanned. SHA-256 0ff0e4b43307.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,709 of 5,886 items agreed. All 26 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "6 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "16 pages of searchable text, 5 tables (253 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-23071 is a general specification for miniature blowers for cooling electronic equipment that defines performance, test and inspection requirements and leaves dimensions, weight and mounting to the individual specification sheets (3.1).",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D, 9 November 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24136/2B(SH)",
   "slug": "mil-dtl-24136-2b-sh",
   "title": "Hose, synthetic rubber, synthetic fiber reinforced, for flexible hose assemblies (high pressure, sizes -4 through -32)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-24136_2B(SH) Hose, synthetic rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "24 September 2020",
   "status": "Active, 23 July 2025",
   "newest": "Revision B Notice 1 - Validation, 23 July 2025",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 4,
   "by_class": {
    "Los Angeles": 3,
    "Ohio": 1
   },
   "stock_examples": [
    "4730-01-501-5461, adapter, straight, pipe to tube, M24136/2-24 (Los Angeles)",
    "4720-01-501-6429, hose, nonmetallic, M24136/2-24 (Los Angeles)",
    "4720-01-501-6902, hose assembly, nonmetallic, M24136/2-24 (Los Angeles)",
    "4720-00-080-4203, hose, nonmetallic, M24136/2-08 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-24136_2B(SH) package.pdf",
    "scan": "MIL-DTL-24136_2B(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24136_2B(SH) clean copy.pdf",
    "record": "MIL-DTL-24136_2B(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 9749052c85a8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,895 of 1,895 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "141 checks on size series and limits. 8 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 6 tables (247 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24136/2 is a specification sheet for high-pressure synthetic rubber hose, ordered in bulk by the linear foot, that gives for each dash size -4 to -32 only the working and burst pressures and the inside and outside diameter limits (Table I) and the braid construction, minimum bend radius and impulse pressure (Table II), with no drawing, no length and no end fitting shape, the fittings being MIL-DTL-24787 parts.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 23 July 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24231E(SH)",
   "slug": "mil-dtl-24231e-sh",
   "title": "Connectors, plugs, receptacles, adapters, hull inserts, and hull insert plugs, pressure-proof, general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-24231E(SH) Connectors, plugs",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 35,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "26 April 2013",
   "status": "Active, 21 March 2023",
   "newest": "Revision E Notice 2 - Validation, 21 March 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-01-491-0530, connector, receptacle, electrical, MIL-C-24231 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-24231E(SH) package.pdf",
    "scan": "MIL-DTL-24231E(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24231E(SH) clean copy.pdf",
    "record": "MIL-DTL-24231E(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "35 pages, 0 scanned. SHA-256 1e2185027f4b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "8,955 of 9,090 items agreed. All 28 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "429 checks on size series and limits. 15 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "34 pages of searchable text, 16 tables (2,161 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24231 is a general specification for pressure-proof connectors, plugs, receptacles, adapters and hull inserts that sets requirements, inspections, wiring connections, cross indexes and cable lists, and sends the shape and dimensions of each part to the specification sheets.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 2 - Validation, 21 March 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24231/10E(SH)",
   "slug": "mil-dtl-24231-10e-sh",
   "title": "Connectors, single cable, type III, 14-, 24-, 30-, or 40-CONDUCTOR",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-24231_10E(SH) Connectors, single cable",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 29,
   "solids": 29,
   "dimensions": 377,
   "dimensions_met": 376,
   "kind": "Detail specification sheet",
   "dated": "26 April 2013",
   "status": "Active, 10 March 2023",
   "newest": "Revision E Notice 2 - Validation, 10 March 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 3,
   "by_class": {
    "Los Angeles": 3
   },
   "stock_examples": [
    "5310-01-491-1581, washer, flat, M24231/10-033 (Los Angeles)",
    "5310-01-564-3693, washer, flat, M24231/10-043 (Los Angeles)",
    "5310-01-564-3698, nut, plain, hexagon, M24231/10-042 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-24231_10E(SH) package.pdf",
    "scan": "MIL-DTL-24231_10E(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24231_10E(SH) clean copy.pdf",
    "record": "MIL-DTL-24231_10E(SH) validation record.pdf",
    "sheet": "MIL-DTL-24231_10E(SH) 3D model.pdf",
    "parts": "MIL-DTL-24231_10E(SH) parts list.pdf",
    "inspection": "MIL-DTL-24231_10E(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/M24231_10-040-freecad.png",
    "pair": "Models/views/M24231_10-040-pair.png",
    "record": "Models/views/M24231_10-040-record.png",
    "front": "Models/views/M24231_10-040-front.png",
    "top": "Models/views/M24231_10-040-top.png",
    "right": "Models/views/M24231_10-040-right.png",
    "cut": "Models/views/M24231_10-040-cut.png"
   },
   "shown_part": "M24231/10-040",
   "application": "FreeCAD 1.1.4",
   "modeled": "29 solids: the single cable connector body M24231/10-040, gland nut -044, nut -042 and washer -043; the five retainer plates, five retainer plate assemblies with their positioning pins and five packings for the 14-, 24-, 30- and 40-conductor connectors; envelope solids of the five molded insert bodies -010, -020, -030, -035 and -036; and the five formed identification plates -091 to -095.",
   "not_modeled": [
    "The connector assemblies M24231/10-001 to -005 as assemblies, and the parts the sheet takes from other documents: the cap M24231/14-011, nylon insert M24231/5-077, screw M24231/5-083, O-rings, retaining rings M24231/10-041 (Spirolox RR-165-S) and M24231/10-045 (Truarc 5100-225-W), sleeving, wire and cable.",
    "The guide pin M24231/5-071 of the body assembly and its angled hole (2.411/2.401 from the top face at 30\u00b0, protruding 0.046 into the bore 1/8 above the insert seat), because the sheet gives neither the pin nor the hole diameter (requirements 4 and 6 refer to MIL-DTL-24231/5).",
    "The two 0.138-32NC-2B tapped holes, 3/16 deep, for the identification plate, which Figure 2 says to locate to suit the plate.",
    "The 30\u00b0 chamfers drawn at both edges of the retaining-ring groove in the body bore, whose size Figure 2 does not give.",
    "Thread forms: every thread is a plain cylinder at its basic major diameter, including the 1.750-12UN-2B gland thread in the body and the 2-3/8-12UN-2B thread of nut -042; the 3/4 full-thread length of the gland thread (requirement 3) is therefore not measured.",
    "The molded inserts' contact pins (item 40, MIL-DTL-24231) and their positions on Figures 3, 6, 7, 8 and 25, the 13/32 contact projection, the solder joints, the wire and cable leads and the shielded-pair connections; the five insert solids share one epoxy envelope.",
    "The positioning pins' 3/16 length and their force-fit holes, which the solids fuse into the plate.",
    "Identification plate markings (part number, revision letter, hull hole number, manufacturer's identification) and the flat blank before forming; plates -091 to -095 differ only in marking.",
    "Surface finish (32, 63 and 125 microinch), hardness test points, materials and the rubber tolerances of MIL-HDBK-149."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "29 pages, 0 scanned. SHA-256 32cf8068ff34.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,014 of 1,146 items agreed. All 66 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "236 checks on size series and limits. 11 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "26 pages of searchable text, 2 tables (462 cells), 26 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "29 solids in STEP AP242. 376 of 377 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 2 - Validation, 10 March 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 2 prints the depth of the retaining-ring groove in the mating bore as 0.027/0.023 from the \u00d81.647/1.637 bore wall to the groove bottom, while the groove bottom is \u00d81.740/1.730, which gives a depth of 0.0415 to 0.0515; the model cuts the groove to \u00d81.735 and the depth check fails."
   ]
  },
  {
   "id": "MIL-DTL-24231/11E(SH)",
   "slug": "mil-dtl-24231-11e-sh",
   "title": "Connector, multiple cable, type IV",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-24231_11E(SH) Connector, multiple cable",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 15,
   "solids": 4,
   "dimensions": 62,
   "dimensions_met": 62,
   "kind": "Detail specification sheet",
   "dated": "26 April 2013",
   "status": "Active, 10 March 2023",
   "newest": "Revision E Notice 2 - Validation, 10 March 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5310-01-491-1581, washer, flat, M24231/11 ITEM 10 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-24231_11E(SH) package.pdf",
    "scan": "MIL-DTL-24231_11E(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24231_11E(SH) clean copy.pdf",
    "record": "MIL-DTL-24231_11E(SH) validation record.pdf",
    "sheet": "MIL-DTL-24231_11E(SH) 3D model.pdf",
    "parts": "MIL-DTL-24231_11E(SH) parts list.pdf",
    "inspection": "MIL-DTL-24231_11E(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/M24231_11-009-freecad.png",
    "pair": "Models/views/M24231_11-009-pair.png",
    "record": "Models/views/M24231_11-009-record.png",
    "front": "Models/views/M24231_11-009-front.png",
    "top": "Models/views/M24231_11-009-top.png",
    "right": "Models/views/M24231_11-009-right.png",
    "cut": "Models/views/M24231_11-009-cut.png"
   },
   "shown_part": "M24231/11-009",
   "application": "FreeCAD 1.1.4",
   "modeled": "4 solids: the body M24231/11-007, the cover M24231/11-008, the welded two-piece body assembly M24231/11-009 that joins them, and the designation plate M24231/11-030.",
   "not_modeled": [
    "The connector assemblies M24231/11-004, -005 and -006 as assemblies, with the receptacle holes, counterbores and spotfaces that Figures 5, 6, 7 and 11 locate in the body assembly and the four 0.138-32NC-2B tapped holes for the designation plate, all drilled at connector assembly after the body assembly is machined (requirement 3).",
    "The nut M24231/11-031, which Figure 10 defines only as M24231/10-042 with a 1.500 thickness, and the retainer plate M24231/11-021, retainer plate assembly -020 and packing -011, which Figure 8 defines as the MIL-DTL-24231/10 parts with other holes; their outlines and threads are in MIL-DTL-24231/10, which is not part of this transcription.",
    "The parts taken from other documents: receptacles (MIL-DTL-24231/12, /13 and /14), washer M24231/10-043, gland nut M24231/10-044, retaining ring M24231/10-045, O-rings, screws, sleeving, wire and cable.",
    "Thread forms: the 2.375-12UN-2A and 1.750-12UN-2B threads are plain cylinders at the basic major diameter, so the 3/4 thread length and the 0.083 limit on partial threads (requirement 11) are not measured.",
    "Designation plate markings (hull hole number, assembly number, revision letter, manufacturer's monogram, 1/8 high), the weld bead shape beyond the outside diameter, surface finish (63 and 125 microinch), hardness test points and materials."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, 0 scanned. SHA-256 6f63bffc9834.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,271 of 1,317 items agreed. All 25 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "90 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "15 pages of searchable text, 2 tables (196 cells), 11 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 62 of 62 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 2 - Validation, 10 March 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 2 gives no depth for the four \u00d85/16 holes equally spaced on the 1-11/16 radius in the underside of the cup; the model drills them 5/16 deep.",
    "Model. Figure 2 gives no length for the two 0.070\u00b10.002R grooves shown in View AA; the model runs them from the end of the body to the shoulder 1.750 from the end.",
    "Model. Figure 4 labels the cover M24231/11-008 as item 19 and the body M24231/11-007 as item 20, while Table I and the captions of Figures 2 and 3 make the body item 19 and the cover item 20."
   ]
  },
  {
   "id": "MIL-DTL-24231/13E(SH)",
   "slug": "mil-dtl-24231-13e-sh",
   "title": "Connector, receptacle, multi-pin, type V, seven- and nine- conductor",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-24231_13E(SH) Connector, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 2,
   "dimensions": 45,
   "dimensions_met": 44,
   "kind": "Detail specification sheet",
   "dated": "26 April 2013",
   "status": "Active, 6 February 2023",
   "newest": "Revision E Notice 1 - Validation, 6 February 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 2
   },
   "stock_examples": [
    "5935-01-487-6286, insert, electrical connector, M24231/13-040 (Los Angeles)",
    "5935-01-491-0530, connector, receptacle, electrical, M24231/13-01 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-24231_13E(SH) package.pdf",
    "scan": "MIL-DTL-24231_13E(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24231_13E(SH) clean copy.pdf",
    "record": "MIL-DTL-24231_13E(SH) validation record.pdf",
    "sheet": "MIL-DTL-24231_13E(SH) 3D model.pdf",
    "parts": "MIL-DTL-24231_13E(SH) parts list.pdf",
    "inspection": "MIL-DTL-24231_13E(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/M24231_13-011-freecad.png",
    "pair": "Models/views/M24231_13-011-pair.png",
    "record": "Models/views/M24231_13-011-record.png",
    "front": "Models/views/M24231_13-011-front.png",
    "top": "Models/views/M24231_13-011-top.png",
    "right": "Models/views/M24231_13-011-right.png",
    "cut": "Models/views/M24231_13-011-cut.png"
   },
   "shown_part": "M24231/13-011",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of receptacle body M24231/13-010 (figure 2), with its O-ring groove, 2-12UN-2A thread, keyway, retaining-ring groove and lead-in, \u00d80.120 blind hole and 7/8 end hole, and of cap M24231/13-011 (figure 3), with its \u00d81.625 bore, 15\u00b0 taper, 2-12UN-2B thread and eight 3/8 rim slots.",
   "not_modeled": [
    "Guide pin M24231/12-012 (item 13), its weld and the hole it sits in, whose diameter figure 2 does not give, and with it the pin's 1/8 location from the closed end, its 0.046 protrusion and 0.046R tip.",
    "The rounds on the outer corner of the body's closed end and of the cap's closed end, which the figures draw without a size.",
    "The drill point at the bottom of the \u00d80.120 hole and the nylon insert M24231/5-077 that sits in it.",
    "The 30\u00b0 edge on the mating-face side of the retaining-ring groove in detail A-1, which has no size of its own.",
    "The 1/8 length of the cap's undercut, which at the thread root diameter merges with the thread cylinder.",
    "Thread form and class limits of 2-12UN-2A and 2-12UN-2B, and the surface finish marks.",
    "Receptacle assemblies M24231/13-001 to -004 (figure 1), the molded insert assemblies of figures 4 and 5, and the O-rings, retaining ring and other parts in Table I, which are assemblies or parts defined elsewhere."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 0 scanned. SHA-256 0e8fc88c460b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "420 of 430 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "88 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 3 tables (200 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 44 of 45 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 1 - Validation, 6 February 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 2 dimensions the body's entry chamfer four ways that cannot all hold: \u00d81.297 at the face, the \u00d81.204 bore and the 0.062 depth make it 36.9\u00b0 to the axis (at least 31.8\u00b0 with \u00b1.005 on each), not 30\u00b0 \u00b11/2\u00b0, and at 30\u00b0 it would be 0.081 deep or \u00d81.276 at the face; the solid keeps 1.297, 1.204 and 0.062.",
    "Model. Figure 2 draws two bore lines between the entry chamfer and the retaining-ring groove, at \u00d81.204 and \u00d81.189/1.185, and detail A-1 puts its 0.025 between them though those diameters differ by only .0075 on a side; the solid takes 1.204 as that bore (the hatched wall and the 0.602 keyway center), 0.025 as the groove depth below it, and 1.189/1.185 as the bore from 29/32 to the closed end, which the drawing otherwise leaves without a diameter."
   ]
  },
  {
   "id": "MIL-DTL-24231/3E(SH) w/AMENDMENT 1",
   "slug": "mil-dtl-24231-3e-sh-w-amendment-1",
   "title": "Connector, plug, type I, molded, seven- and nine-conductor (straight and 90 degrees)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-24231_3E(SH) w_AMENDMENT 1 Connector, plug",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 5,
   "dimensions": 69,
   "dimensions_met": 69,
   "kind": "Detail specification sheet",
   "dated": "13 May 2024",
   "status": "Active, 13 May 2024",
   "newest": "Revision E Amendment 1 (amendment incorporated), 13 May 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 2
   },
   "stock_examples": [
    "5935-01-226-0149, connector body, receptacle, electr, M24231/3-011 (Los Angeles, Seawolf)",
    "5935-01-537-5513, connector, plug, electrical, M24231/3-003 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24231_3E(SH) w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-24231_3E(SH) w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-24231_3E(SH) w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-24231_3E(SH) w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-24231_3E(SH) w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-24231_3E(SH) w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-24231_3E(SH) w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/MIL-DTL-24231_3_sealing_plug_item_8_-freecad.png",
    "pair": "Models/views/MIL-DTL-24231_3_sealing_plug_item_8_-pair.png",
    "record": "Models/views/MIL-DTL-24231_3_sealing_plug_item_8_-record.png",
    "front": "Models/views/MIL-DTL-24231_3_sealing_plug_item_8_-front.png",
    "top": "Models/views/MIL-DTL-24231_3_sealing_plug_item_8_-top.png",
    "right": "Models/views/MIL-DTL-24231_3_sealing_plug_item_8_-right.png",
    "cut": "Models/views/MIL-DTL-24231_3_sealing_plug_item_8_-cut.png"
   },
   "shown_part": "MIL-DTL-24231/3 sealing plug (item 8)",
   "application": "FreeCAD 1.1.4",
   "modeled": "Five solids of the parts the figures dimension: the coupling M24231/3-011, the protective cap M24231/3-012, the sealing plug (item 8), the plug sleeve M24231/3-010 and the insulating disk M24231/3-021.",
   "not_modeled": [
    "The molded plug assemblies M24231/3-001 to -004 (figures 1 and 7): the molding is dimensioned only by \u00d81-7/8, 3 MIN, 1, 9/32, 1/4, 1-7/8, 3-3/4 MAX and SR 15/16, its boot tapers to the cable ordered, whose diameter the sheet does not give, and the inserts (items 13 and 14) are defined in MIL-DTL-24231/29.",
    "The sealing plug assembly M24231/3-020 (figure 6) and its SAE-AS28775-220 O-ring.",
    "The thread form of the 2-12UN threads.",
    "Corner and edge radii: 3/32R, 1/64R and 1/16R on the coupling, the 1/16R corners of the sealing plug's O-ring groove, and 1/16R, 1/32R and round all edges on the plug sleeve.",
    "Surface finish (125 and 32), the plasma-sprayed coating of requirement 4, the drilling or slotting of the sleeve that requirement 3 allows, and the mold marking.",
    "The contact arrangements and key positions of the inserts in figures 1 and 7."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 3 scanned. SHA-256 1c89d5b2d65e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "471 of 487 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "75 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 1 table (128 cells), 7 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "5 solids in STEP AP242. 69 of 69 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 1 (amendment incorporated), 13 May 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 5 gives the width of the protective cap's slot (1/8) but not its depth; the solid takes 1/8, level with the end of the undercut as drawn."
   ]
  },
  {
   "id": "MIL-DTL-24282A(SH)",
   "slug": "mil-dtl-24282a-sh",
   "title": "Light, signal, multipurpose, kit, nonmagnetic",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-24282A(SH) Light, signal",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 17,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "14 July 2026",
   "status": "Active, 14 July 2026",
   "newest": "Revision A, 14 July 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5850-00-501-1455, light, signal, MIL-L-24282 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-24282A(SH) package.pdf",
    "scan": "MIL-DTL-24282A(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24282A(SH) clean copy.pdf",
    "record": "MIL-DTL-24282A(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "17 pages, 0 scanned. SHA-256 227f21312e2a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "7,158 of 7,246 items agreed. All 27 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "19 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "19 pages of searchable text, 2 tables (220 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24282A(SH) is a detail specification for the nonmagnetic multipurpose signal light kit (types I, II and III) that sets materials, electrical, lamp, LED, battery, cable, transformer, weight, finish, marking and inspection requirements; its figures give only approximate light assembly values (7-7/8, 2-3/4 and 10-13/16 in Figure 1, 6-9/16 dia. in Figure 2) and maximum stowage box limits (7-1/2, 15-5/8 and 14-1/8 in Figure 4), and its only full size, the 5-3/8 in diameter by 3/32 in plastic lens disc of 3.13.2.1.8, has no drawing, so no figure or table fixes a part shape by size or dash number.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A, 14 July 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24402F(SH)",
   "slug": "mil-dtl-24402f-sh",
   "title": "Filters (hydraulic), filter elements, and filter differential pressure indicators, general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-24402F(SH) Filters, hydraulic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 15,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "11 February 2014",
   "status": "Active, 21 March 2024",
   "newest": "Revision F Notice 2 - Validation, 21 March 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "4330-01-481-4571, filter assembly, fluid, MIL-DTL-24402 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-24402F(SH) package.pdf",
    "scan": "MIL-DTL-24402F(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24402F(SH) clean copy.pdf",
    "record": "MIL-DTL-24402F(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, 1 scanned. SHA-256 7239aa1354af.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,851 of 6,085 items agreed. All 15 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "9 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "15 pages of searchable text, 10 tables (169 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24402F(SH) is a general specification for hydraulic filter housings, filter elements and differential pressure indicators that sets construction, protective and control devices, shock, fatigue impulse, proof and burst pressure, vibration, marking and qualification and conformance tests, and sends the envelope dimensions of each housing, element and indicator to specification sheets MIL-DTL-24402/1, /2, /3 and /5 and to SAE-J2321; its only dimensioned figure, Figure 1, gives the differential pressure indicator port cut into a housing (.625/.627, .688/.690 and .714/.730 D bores, four 1/4-28UNF-3B holes on a 1.188 DIA circle, a 1-11/16 DIA spotface and pressure port penetration limits), not a part.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 2 - Validation, 21 March 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24402/2A",
   "slug": "mil-dtl-24402-2a",
   "title": "Filter housings, hydraulic, duplex",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-24402_2A Filter housings, hydraulic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 6,
   "dimensions": 294,
   "dimensions_met": 294,
   "kind": "Detail specification sheet",
   "dated": "11 February 2014",
   "status": "Active, 16 February 2024",
   "newest": "Revision A Notice 2 - Validation, 16 February 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "4330-01-481-4571, filter assembly, fluid, M24402/2NL-G150 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-24402_2A package.pdf",
    "scan": "MIL-DTL-24402_2A legacy scan.pdf",
    "clean": "MIL-DTL-24402_2A clean copy.pdf",
    "record": "MIL-DTL-24402_2A validation record.pdf",
    "sheet": "MIL-DTL-24402_2A 3D model.pdf",
    "parts": "MIL-DTL-24402_2A parts list.pdf",
    "inspection": "MIL-DTL-24402_2A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 4",
   "pictures": {
    "iso": "Models/views/M24402_2NL-freecad.png",
    "pair": "Models/views/M24402_2NL-pair.png",
    "record": "Models/views/M24402_2NL-record.png",
    "front": "Models/views/M24402_2NL-front.png",
    "top": "Models/views/M24402_2NL-top.png",
    "right": "Models/views/M24402_2NL-right.png",
    "cut": "Models/views/M24402_2NL-cut.png"
   },
   "shown_part": "M24402/2NL",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the six duplex filter housings of Table I: a rectangular head with the inlet port and one or both outlet ports in its top face, each with the figure 4 counterbore, bore step and through bore and four tapped bolt holes on a 2.500 square, four tapped mounting holes in the bottom face, and two plain bowls under the outlet ports; type N and type R share one outline for each porting.",
   "not_modeled": [
    "The inside of the housing: selector valve, check valves, the type R bypass relief valve, the Size B filter elements to SAE J2321/2 and the flow passages, which the document shows only as schematics.",
    "The selector valve dial, handle and cover plate on the front face with its eight lockwired MS20008H10 fasteners, and the two 3.00 MIN dimensions from the centerline in the bottom view, whose extension lines end at the cover plate.",
    "The differential pressure indicators of MIL-DTL-24402/5 and their zone (the solids only stay inside its 7.00 MAX line), the MIL-DTL-24704/4 blind flange and MIL-F-24704/5 insert sleeve on 'D' assemblies, and the user clearances of 2.00 MAX for blind flanges and 26.50 MAX for element removal.",
    "The step that figure 1 draws in the head bottom at the outer ends, the recess of the mounting face and the shape of the bowls, none of which carries a dimension.",
    "From figure 4: the 1/32 X 30\u00b0 chamfer at the counterbore mouth, the .035\u00b1.005, .010 +.000 -.005 and .005\u00b1.002 radii, the 63 and 125 surface finishes and the .010 runout of the port face to A (the solids are geometrically perfect).",
    "Thread form, the 90\u00b0 countersink angle beyond its .53 diameter, and the MIL-STD-2193 inserts for aluminum housings.",
    "Ratings and tests: 3,000 lb/in\u00b2 operating pressure, 100 gal/min flow, the Table II bypass settings, fatigue impulse, 4,500 lb/in\u00b2 proof pressure and 35 lb/in\u00b2 pressure drop."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 1 scanned. SHA-256 9345b538f469.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "864 of 866 items agreed. All 3 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 2 tables (46 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "6 solids in STEP AP242. 294 of 294 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 2 - Validation, 16 February 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. In the figure 1 bottom view the vertical 2.000 basic dimension is drawn from the centerline to the back face line, which read literally puts the back face 2.000 behind the centerline and the mounting hole rows 1.00 behind and 3.00 in front of it; the solids center the rows on the centerline at 2.000 basic each side, as the horizontal 2.000 does, which with 1.00\u00b1.03 puts the back face 3.00\u00b1.03 behind it and matches the 3.03 MAX of the top view, and the drawing owner should confirm this reading.",
    "Model. Figure 1 gives no dimension for the head front face, the bowl diameter or the head bottom outside the mounting face; the solids use 3.00 in front of the outlet centerline and 4.00 diameter bowls, and a space claim must take these from the supplier's drawing or use the 7.00 MAX indicator line and 9.00 MAX width as the envelope."
   ]
  },
  {
   "id": "MIL-DTL-24631/1C(SH)",
   "slug": "mil-dtl-24631-1c-sh",
   "title": "Paint, epoxy, black R0 1.8, Navy formula 184, type I (metric)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-24631_1C(SH) Paint, epoxy",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "6 June 1997",
   "status": "Active, 20 January 2021",
   "newest": "Revision C Notice 1 - Validation, 20 January 2021",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "8010-01-475-3093, epoxy paint, MIL-DTL-24631/1 FORMULA 184 TY 1 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-24631_1C(SH) package.pdf",
    "scan": "MIL-DTL-24631_1C(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24631_1C(SH) clean copy.pdf",
    "record": "MIL-DTL-24631_1C(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 39f7b2f12102.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "458 of 477 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "13 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 3 tables (205 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24631/1C is a detail specification sheet for Navy Formula 184 black flexible epoxy camouflage paint that gives the ingredient quantities of components A and B in Tables I and II and the pigment, volatiles, density, VOC, drying, flash point, gloss and reflectance limits of the paint in Table III, with no drawing and no part dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 1 - Validation, 20 January 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-26500G w/AMENDMENT 3",
   "slug": "mil-dtl-26500g-w-amendment-3",
   "title": "Connectors, general purpose, electrical, miniature, circular, environment resisting or hermetically sealed, general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-26500G w_AMENDMENT 3 Connectors, general purpose",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 30,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "05 February 2021",
   "status": "Inactive, 5 February 2021",
   "newest": "Revision G Amendment 3 (all previous amendments incorporated), 5 February 2021",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-00-081-4340, connector, plug, electrical, MIL-C-26500 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-26500G w_AMENDMENT 3 package.pdf",
    "scan": "MIL-DTL-26500G w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MIL-DTL-26500G w_AMENDMENT 3 clean copy.pdf",
    "record": "MIL-DTL-26500G w_AMENDMENT 3 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "30 pages, 0 scanned. SHA-256 08f5316c6f40.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "11,773 of 11,801 items agreed. All 25 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "107 checks on size series and limits. 6 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "27 pages of searchable text, 12 tables (679 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-26500 is the general specification for miniature circular environment-resisting and hermetic connectors: it defines materials, performance and test requirements (wire accommodation, torque, insert and contact retention loads, test voltages) and leaves connector dimensions to the applicable MS sheets, so it fixes no part shape.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision G Amendment 3 (all previous amendments incorporated), 5 February 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-28754/54C",
   "slug": "mil-dtl-28754-54c",
   "title": "Connectors, electrical, modular, extractor, module, single and double span, styles I and II",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-28754_54C Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 2,
   "dimensions": 76,
   "dimensions_met": 74,
   "kind": "Detail specification sheet",
   "dated": "4 November 2015",
   "status": "Active, 6 April 2026",
   "newest": "Revision C Notice 2 - Validation, 6 April 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 2,
    "Ohio": 1
   },
   "stock_examples": [
    "5998-01-168-0815, extractor, electrical card, M28754/54-01 (Los Angeles, Ohio)",
    "5998-01-434-4112, extractor, electrical card, M28754/54-02 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-28754_54C package.pdf",
    "scan": "MIL-DTL-28754_54C legacy scan.pdf",
    "clean": "MIL-DTL-28754_54C clean copy.pdf",
    "record": "MIL-DTL-28754_54C validation record.pdf",
    "sheet": "MIL-DTL-28754_54C 3D model.pdf",
    "parts": "MIL-DTL-28754_54C parts list.pdf",
    "inspection": "MIL-DTL-28754_54C inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "*Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28754_54-02-freecad.png",
    "pair": "Models/views/M28754_54-02-pair.png",
    "record": "Models/views/M28754_54-02-record.png",
    "front": "Models/views/M28754_54-02-front.png",
    "top": "Models/views/M28754_54-02-top.png",
    "right": "Models/views/M28754_54-02-right.png",
    "cut": "Models/views/M28754_54-02-cut.png"
   },
   "shown_part": "M28754/54-02",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the type 1A module extractor in single span (M28754/54-01) and double span (M28754/54-02): a solid housing with the side-view lower end, the lower end of the handle assembly under the housing foot, and the two extractor plates with their pins.",
   "not_modeled": [
    "The handle, its grip and window, the springs and the inside of the housing; the 1.10 MIN clearance on the handle and the .75 minimum extraction travel are not carried by the solids.",
    "The 30\u00b0 chamfer on the inner bottom corner of each plate, whose size the document does not give.",
    "The R .015 edge and the .030 \u00b1.005 force fixture of the structural integrity view, the 60 lb load, and the durability fixture of Figure 2.",
    "Marking, materials (polycarbonate body, stainless steel pins, plate and springs) and finish."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 2 scanned. SHA-256 ed9ff30b6394.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "651 of 655 items agreed. All 4 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "44 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (75 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 74 of 76 stated dimensions measure within limits; 2 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 2 - Validation, 6 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. D (REF) is printed 3.12 for -01 and 6.12 for -02, but the .064 + E + .054 chain under the same view sums to 3.078 and 6.078; the chain reaches 3.12 and 6.12 only with E and both insets near their upper limits, so the intended housing width needs to be confirmed.",
    "Model. The depth of the handle assembly's lower end below the housing foot is not shown in the drawing and follows only from notes 4 and 5 (.218 less .17); its shape front to back is not dimensioned."
   ]
  },
  {
   "id": "MIL-DTL-28840/14G w/AMENDMENT 1",
   "slug": "mil-dtl-28840-14g-w-amendment-1",
   "title": "Connectors, electrical, circular, threaded, high shock, high density, shipboard, crimp contacts, receptacle, jam nut mounting, classes D, DS, P, T and Z",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-28840_14G w_AMENDMENT 1 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 9,
   "dimensions": 270,
   "dimensions_met": 270,
   "kind": "Detail specification sheet",
   "dated": "16 May 2019",
   "status": "Active, 21 March 2024",
   "newest": "Revision G Notice 1 - Validation, 21 March 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-01-725-0643, connector, receptacle, electrical, M28840/14LB1P1 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-28840_14G w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-28840_14G w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-28840_14G w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-28840_14G w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-28840_14G w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-28840_14G w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-28840_14G w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28840_14_E_-freecad.png",
    "pair": "Models/views/M28840_14_E_-pair.png",
    "record": "Models/views/M28840_14_E_-record.png",
    "front": "Models/views/M28840_14_E_-front.png",
    "top": "Models/views/M28840_14_E_-top.png",
    "right": "Models/views/M28840_14_E_-right.png",
    "cut": "Models/views/M28840_14_E_-cut.png"
   },
   "shown_part": "M28840/14*E***",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-DTL-28840/14G jam nut mounting receptacle at each of the nine shell size designators A (11) to J (33), each with its hex nut and O-ring: a front shell of diameter N, the M mounting thread with its L flat, the T hex nut S thick set .188 from the flange, a G square flange with K corners .100 to .130 thick with its front face 1.013 to 1.033 from the front of the shell, the BB O-ring groove and O-ring of Detail A, and a rear body to the 2.062 max overall length.",
   "not_modeled": [
    "The front and rear end configuration of the connector (coupling thread, shell bore, master polarizing keyway, key positions 1 to 6, the rear taper, knurled ring and backshell thread), which the figure sends to MIL-DTL-28840; the shell is solid with no bore.",
    "The insert arrangements of MIL-STD-1698 and the crimp contacts; the solids have no insert cavity.",
    "The thread form of the M mounting thread and the nut thread, and the nut chamfers the side view draws.",
    "The six lockwire holes the requirements call for in the mounting nut, which the sheet does not size or place.",
    "The panel cutout P and LL, which belongs to the panel; the thread section is checked to pass through it.",
    "Part numbers that differ only in class code (A, B, F, L, S), insert arrangement, contact style or keying share their shell size's envelope; the sheet does not list the insert arrangements, so those part numbers are not enumerated."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 933d8880aff4.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "493 of 708 items agreed. All 62 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "40 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 4 tables (166 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 270 of 270 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Notice 1 - Validation, 21 March 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet sends the front and rear end configuration to MIL-DTL-28840, which is not in the package, and gives no length for the front shell, the mounting thread or the rear body, nor a diameter for the rear body, so an engineer must take those from MIL-DTL-28840 before the solids are used for mating or fit checks."
   ]
  },
  {
   "id": "MIL-DTL-28840/16D w/AMENDMENT 2",
   "slug": "mil-dtl-28840-16d-w-amendment-2",
   "title": "Connectors, electrical, circular, threaded, high shock, high density, shipboard, crimp contacts, plug, classes D, DS, P, T, and Z",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-28840_16D w_AMENDMENT 2 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 9,
   "dimensions": 45,
   "dimensions_met": 45,
   "kind": "Detail specification sheet",
   "dated": "5 August 2019",
   "status": "Active, 18 July 2024",
   "newest": "Revision D Notice 1 - Validation, 18 July 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 3,
   "by_class": {
    "Los Angeles": 1,
    "Ohio": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5935-01-498-4654, connector, plug, electrical, M28840/16BA1S1 (Los Angeles)",
    "5935-01-261-0831, connector, plug, electrical, M28840/16AE1S4 (Ohio)",
    "5935-01-498-4663, connector, plug, electrical, M28840/16BH1S1 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-28840_16D w_AMENDMENT 2 package.pdf",
    "scan": "MIL-DTL-28840_16D w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-DTL-28840_16D w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-DTL-28840_16D w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-DTL-28840_16D w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-DTL-28840_16D w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-DTL-28840_16D w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28840_16_shell_E-freecad.png",
    "pair": "Models/views/M28840_16_shell_E-pair.png",
    "record": "Models/views/M28840_16_shell_E-record.png",
    "front": "Models/views/M28840_16_shell_E-front.png",
    "top": "Models/views/M28840_16_shell_E-top.png",
    "right": "Models/views/M28840_16_shell_E-right.png",
    "cut": "Models/views/M28840_16_shell_E-cut.png"
   },
   "shown_part": "M28840/16 shell E",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-DTL-28840/16D plug for each of the nine shell size designators A (11) to J (33): a cylinder at the Figure 1 Q maximum diameter over the 1.938 maximum overall length, the space the sheet allows the plug.",
   "not_modeled": [
    "The stepped outline Figure 1 draws (front shell, coupling ring, peripheral seal, rear body, knurled ring and rear end), which the sheet does not dimension, and the front and rear end configuration, coupling thread and shell bore, which it places in MIL-DTL-28840.",
    "The master polarizing key and alternate key positions 1 to 6, the safety wire holes (note 6, MIL-DTL-28840), the knurl and the PIN marking.",
    "The insert arrangements of MIL-STD-1698 and the crimp contacts of styles P, S, D, E, F and G; the solids are solid with no insert cavity.",
    "Part numbers that differ only in class code (A, B, F, L, S), insert arrangement, contact style or keying share their shell size's envelope; the sheet does not list the insert arrangements, so those part numbers are not enumerated."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 7a644b9b1d2e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "397 of 409 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (20 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 45 of 45 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 18 July 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 gives only Q max and the 1.938 max overall length and sends the front and rear end configuration to MIL-DTL-28840, which is not in the package, so the solids are space-claim envelopes; an engineer must take the shell, coupling ring and rear end diameters and lengths from MIL-DTL-28840 before the solids are used for mating or interface checks."
   ]
  },
  {
   "id": "MIL-DTL-28840/18E w/AMENDMENT 1",
   "slug": "mil-dtl-28840-18e-w-amendment-1",
   "title": "Connectors, electrical, circular, threaded, high shock, high density, shipboard, crimp contacts, plug assembly, open wire, 90\u00ba, classes D, DS, P, T, and Z",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-28840_18E w_AMENDMENT 1 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 9,
   "dimensions": 180,
   "dimensions_met": 180,
   "kind": "Detail specification sheet",
   "dated": "3 April 2019",
   "status": "Active, 5 February 2024",
   "newest": "Revision E Notice 1 - Validation, 5 February 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-01-497-4496, connector, plug, electrical, M28840/18 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-28840_18E w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-28840_18E w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-28840_18E w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-28840_18E w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-28840_18E w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-28840_18E w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-28840_18E w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28840_18_E_-freecad.png",
    "pair": "Models/views/M28840_18_E_-pair.png",
    "record": "Models/views/M28840_18_E_-record.png",
    "front": "Models/views/M28840_18_E_-front.png",
    "top": "Models/views/M28840_18_E_-top.png",
    "right": "Models/views/M28840_18_E_-right.png",
    "cut": "Models/views/M28840_18_E_-cut.png"
   },
   "shown_part": "M28840/18*E***",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-DTL-28840/18E open wire 90 degree plug assembly for each of the nine shell size designators A (11) to J (33) (M28840/18*A*** to M28840/18*J***): a body of the Q maximum diameter, L long, holding the B coupling thread at the front, and a cable clamp of the maximum OD over the rear clamps reaching Z below the connector centerline, with the F cable entry.",
   "not_modeled": [
    "The plug and backshell outlines Figure 1 draws (front shell and keys, knurled coupling nut, flange, backshell and its knurled ring, the sloped elbow, the clamp's tapered sides, saddle bars and two screws), which this sheet does not dimension and refers to MIL-DTL-28840/16, MIL-DTL-28840/2 and MIL-DTL-28840.",
    "The three clearance holes for .032 diameter safety wire, 120 degrees apart, which Figure 1 shows without a hole size or location.",
    "The B thread form (.1 pitch, .2 lead, double start, class 2B); the coupling thread is a plain bore at its major diameter.",
    "The clamp's travel between F open and F closed; each solid carries one round cable entry at the middle of the range.",
    "The wire path through the elbow, insert arrangements (MIL-STD-1698), crimp contacts of styles P, S, D, E, F and G, key positions 1 to 6 and the PIN marking; the interior is solid apart from the thread bore and the cable entry.",
    "Part numbers that differ only in class code (A, B, F, L, S), insert arrangement, contact style or keying (the * positions of each assembly PIN) share their shell size's solid; the sheet does not list the insert arrangements, so those part numbers are not enumerated."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 1 scanned. SHA-256 6a621f6d3313.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "532 of 548 items agreed. All 22 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (135 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 180 of 180 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 1 - Validation, 5 February 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. This sheet and MIL-DTL-28840/16 give no length for the coupling nut or backshell, no thread length, no clamp height or position along the connector axis and no width for the elbow; the solids use a Q cylinder to L, an assumed .500 thread depth and a round clamp flush with the rear, so an engineer must take the backshell, elbow and clamp dimensions from MIL-DTL-28840/2, and confirm the coupling nut and thread lengths, which MIL-DTL-28840 does not give either, before the solids are used for anything closer than a space claim."
   ]
  },
  {
   "id": "MIL-DTL-32258 w/AMENDMENT 2",
   "slug": "mil-dtl-32258-w-amendment-2",
   "title": "Nut, self-locking (ring type non-metallic insert), heavy hex, unj thread profile, nickel-copper alloy",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-32258 w_AMENDMENT 2 Nut, self-locking",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 100,
   "dimensions": 1200,
   "dimensions_met": 1200,
   "kind": "Detail specification",
   "dated": "1 June 2021",
   "status": "Active, 1 June 2021",
   "newest": "Amendment 2 (all previous amendments incorporated), 1 June 2021",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5310-01-501-2267, nut, self-locking, hexagon, M32258-UVC20 (Los Angeles)",
    "5310-01-496-3362, nut, plain, hexagon, M32258-UCA40 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-32258 w_AMENDMENT 2 package.pdf",
    "scan": "MIL-DTL-32258 w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-DTL-32258 w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-DTL-32258 w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-DTL-32258 w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-DTL-32258 w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-DTL-32258 w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 5",
   "pictures": {
    "iso": "Models/views/M32258-UAC16-freecad.png",
    "pair": "Models/views/M32258-UAC16-pair.png",
    "record": "Models/views/M32258-UAC16-record.png",
    "front": "Models/views/M32258-UAC16-front.png",
    "top": "Models/views/M32258-UAC16-top.png",
    "right": "Models/views/M32258-UAC16-right.png",
    "cut": "Models/views/M32258-UAC16-cut.png"
   },
   "shown_part": "M32258-UAC16",
   "application": "FreeCAD 1.1.4",
   "modeled": "Heavy hex self-locking nuts for all 16 nominal diameters of TABLE II (0.250 to 2.500), each one solid of the nickel-copper body and its locking collar with the locking ring region filled to a ring bore, carrying the hexagon with turned corners, the 30\u00b0 bearing face chamfer, the 88\u00b0 countersink and a plain thread bore to L; each solid is reported under every PIN of its diameter in lubrication U and L, temperature rating A and V, thread series C, and thread series 8 at 1.000 to 2.500.",
   "not_modeled": [
    "The UNJ thread form (ASME B1.15 Class 3B or SAE AS8879); the thread bore is a plain cylinder at the nominal major diameter for both thread series.",
    "The non-metallic locking ring as a separate body and its material, the dry film lubricant coating and the marking; the lubrication and temperature rating codes do not change the solid.",
    "PINs with thread series 8 at 0.250 to 0.875 nominal diameter (codes 04 to 14) are not built, since 8 threads per inch is coarser than the coarse series at those sizes.",
    "The corner chamfer the figure draws at the collar end of the hexagon, the rounded crimp at the collar end and the sloped bottom of the ring pocket carry no dimensions and are not modeled.",
    "The rounding or lack of fill at the hex corners next to the bearing surface chamfer allowed by note 3/, bearing surface roughness, tensile strength, locking torque and the test bolts of TABLE V are not geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, 0 scanned. SHA-256 685911d751df.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,208 of 4,219 items agreed. All 12 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "336 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 11 tables (551 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "100 solids in STEP AP242. 1,200 of 1,200 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Amendment 2 (all previous amendments incorporated), 1 June 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no diameter or end shape for the locking collar between B and H and no bore for the locking ring; an engineer must confirm or supply these (modeled at minimum F with a square end, and at the Table V minimum material condition minimum pitch diameter).",
    "Model. The PIN scheme of 1.3 lets thread series 8 combine with every diameter code from 04 to 40, but Table V's pitch diameters put the coarse series at 20 to 9 threads per inch for 0.250 to 0.875, so 8 threads per inch there would be coarser than coarse; an engineer must confirm which diameters the 8 series covers (series 8 is built only at 1.000 and larger)."
   ]
  },
  {
   "id": "MIL-DTL-3661/12B",
   "slug": "mil-dtl-3661-12b",
   "title": "Lenses, indicator-light, style LC12",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-3661_12B Lenses, indicator-light",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 10,
   "dimensions": 90,
   "dimensions_met": 90,
   "kind": "Detail specification sheet",
   "dated": "7 July 2024",
   "status": "Active, 7 July 2024",
   "newest": "Revision B, 7 July 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6210-00-045-5494, lens, light, MIL-DTL-3661/12 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-3661_12B package.pdf",
    "scan": "MIL-DTL-3661_12B legacy scan.pdf",
    "clean": "MIL-DTL-3661_12B clean copy.pdf",
    "record": "MIL-DTL-3661_12B validation record.pdf",
    "sheet": "MIL-DTL-3661_12B 3D model.pdf",
    "parts": "MIL-DTL-3661_12B parts list.pdf",
    "inspection": "MIL-DTL-3661_12B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/LC12RT2-freecad.png",
    "pair": "Models/views/LC12RT2-pair.png",
    "record": "Models/views/LC12RT2-record.png",
    "front": "Models/views/LC12RT2-front.png",
    "top": "Models/views/LC12RT2-top.png",
    "right": "Models/views/LC12RT2-right.png",
    "cut": "Models/views/LC12RT2-cut.png"
   },
   "shown_part": "LC12RT2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style LC12 indicator-light lens, one for each of the ten Table I type designations, all the same Figure 1 shape: a domed 7/16 lens body .423 from dome tip to shoulder and a 5/16-32 UNEF-2A threaded shank 3/16 long, at nominal sizes.",
   "not_modeled": [
    "The internal construction: the cavity for the T-1-3/4 midget flange base lamp and the lamp retainer (design optional), neither of which Figure 1 dimensions; each solid is one solid body.",
    "The thread form; the class 2A thread limits, which the sheet does not print, are not checked.",
    "Lens material, color and transmittance, the mating LH73/1 holder and temperature cycling; these are recorded as parameters only.",
    "The \u00b1.015, \u00b1.010 and \u00b11/32 tolerances are checked but not built as limit-of-size variants."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, 0 scanned. SHA-256 1499d9d42809.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "269 of 269 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "10 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 2 tables (62 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "10 solids in STEP AP242. 90 of 90 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B, 7 July 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 gives no radius or height for the dome and draws it shallower than a hemisphere, meeting the 7/16 body at an edge, so the front profile of the lens and the length of straight 7/16 body behind the dome are not defined."
   ]
  },
  {
   "id": "MIL-DTL-3661/30B",
   "slug": "mil-dtl-3661-30b",
   "title": "Lenses, indicator-light, style LC30",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-3661_30B Lenses, indicator-light",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 5,
   "dimensions": 55,
   "dimensions_met": 55,
   "kind": "Detail specification sheet",
   "dated": "22 July 2024",
   "status": "Active, 22 July 2024",
   "newest": "Revision B, 22 July 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6210-00-470-7602, lens, light, MIL-L-3661/30 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-3661_30B package.pdf",
    "scan": "MIL-DTL-3661_30B legacy scan.pdf",
    "clean": "MIL-DTL-3661_30B clean copy.pdf",
    "record": "MIL-DTL-3661_30B validation record.pdf",
    "sheet": "MIL-DTL-3661_30B 3D model.pdf",
    "parts": "MIL-DTL-3661_30B parts list.pdf",
    "inspection": "MIL-DTL-3661_30B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/LC30YN3-freecad.png",
    "pair": "Models/views/LC30YN3-pair.png",
    "record": "Models/views/LC30YN3-record.png",
    "front": "Models/views/LC30YN3-front.png",
    "top": "Models/views/LC30YN3-top.png",
    "right": "Models/views/LC30YN3-right.png",
    "cut": "Models/views/LC30YN3-cut.png"
   },
   "shown_part": "LC30YN3",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style LC30 indicator-light lens, one for each of the five Table I type designations, all the same Figure 1 shape: a .408 knurled flange ahead of a .505 threaded body, 1/2 overall and 9/32 body length at their MAX limits, with a 3/8-32 UNEF-2B threaded bore three threads deep in the body back face.",
   "not_modeled": [
    "The internal construction: the internal lens fluting, the lamp cavity and the joint between the lens and the threaded body that the half section shows, none of which Figure 1 dimensions; each solid is one body.",
    "The flute and knurl patterns (design optional per Note 3 and Requirement 2), the rounded front edge, the intermediate collar and fillet at the shoulder, the thread entry chamfer and the thread form.",
    "Lens material, color and transmittance and temperature cycling; these are recorded as parameters only.",
    "The LH90/2 and LH90/3 mating holders of MIL-DTL-3661/48, and the class 2B thread limits, which the sheet does not print and which are not checked."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, 0 scanned. SHA-256 b1044ecddf86.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "251 of 252 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "9 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 2 tables (37 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "5 solids in STEP AP242. 55 of 55 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B, 22 July 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The inch/mm table under Figure 1 prints 10.86 mm for 0.408, but at the 1 inch = 25.4 mm of Note 2 it is 10.36 mm; the solids use the inch value.",
    "Model. Figure 1 gives only the three-thread minimum for the 3/8-32 UNEF-2B thread and no depth for the threaded bore or the lamp cavity behind it, so how far the mating holder enters the lens is not defined."
   ]
  },
  {
   "id": "MIL-DTL-3661/32B",
   "slug": "mil-dtl-3661-32b",
   "title": "Lenses, indicator-light (rotatable), style LC32",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-3661_32B Lenses, indicator-light",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 5,
   "dimensions": 55,
   "dimensions_met": 55,
   "kind": "Detail specification sheet",
   "dated": "22 July 2024",
   "status": "Active, 22 July 2024",
   "newest": "Revision B, 22 July 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6210-00-470-7602, lens, light, MIL-DTL-3661/32 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-3661_32B package.pdf",
    "scan": "MIL-DTL-3661_32B legacy scan.pdf",
    "clean": "MIL-DTL-3661_32B clean copy.pdf",
    "record": "MIL-DTL-3661_32B validation record.pdf",
    "sheet": "MIL-DTL-3661_32B 3D model.pdf",
    "parts": "MIL-DTL-3661_32B parts list.pdf",
    "inspection": "MIL-DTL-3661_32B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/LC32YT2-freecad.png",
    "pair": "Models/views/LC32YT2-pair.png",
    "record": "Models/views/LC32YT2-record.png",
    "front": "Models/views/LC32YT2-front.png",
    "top": "Models/views/LC32YT2-top.png",
    "right": "Models/views/LC32YT2-right.png",
    "cut": "Models/views/LC32YT2-cut.png"
   },
   "shown_part": "LC32YT2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style LC32 rotatable indicator-light lens and holder, one for each of the five Table I type designations, all the same Figure 1 shape: a .408 lens ahead of a 33/64 holder, 1/2 overall and 9/32 holder length at their MAX limits, with a 3/8-32 UNEF-2B threaded bore three threads deep in the holder back face.",
   "not_modeled": [
    "The internal construction: the lamp cavity, the seat of the lens in the holder and the separate plastic lens and aluminum holder parts, none of which Figure 1 dimensions; each solid is one body.",
    "The optional taper of the lens sides, the rounded flange ring and the knurl (design optional per Note 3), and the thread form.",
    "Lens material, color and transmittance, the black-anodized aluminum holder, the rotatable lens cap and temperature cycling; these are recorded as parameters only.",
    "The LH90/2 mating holder of MIL-DTL-3661/48, and the class 2B thread limits, which the sheet does not print and which are not checked."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, 0 scanned. SHA-256 21c1f5f52bd2.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "245 of 246 items agreed. All 1 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "12 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 2 tables (39 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "5 solids in STEP AP242. 55 of 55 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B, 22 July 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The inch/mm table under Figure 1 prints 10.86 mm for .408 and 18.10 mm for 33/64, but at the 1 inch = 25.4 mm of Note 2 these are 10.36 mm and 13.10 mm; the solids use the inch values.",
    "Model. Figure 1 gives only the three-thread minimum for the 3/8-32 UNEF-2B thread and no depth for the threaded bore or the lamp cavity behind it, so how far the LH90/2 holder enters the lens holder is not defined."
   ]
  },
  {
   "id": "MIL-DTL-3661/60D",
   "slug": "mil-dtl-3661-60d",
   "title": "Lampholder, transformer, light, indicator, style LH93",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-3661_60D Lampholder, transformer",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 4,
   "dimensions": 44,
   "dimensions_met": 44,
   "kind": "Detail specification sheet",
   "dated": "24 January 2025",
   "status": "Active, 24 January 2025",
   "newest": "Revision D, 24 January 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5950-00-198-8704, transformer, power, M3661/60 LH93/4 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-3661_60D package.pdf",
    "scan": "MIL-DTL-3661_60D legacy scan.pdf",
    "clean": "MIL-DTL-3661_60D clean copy.pdf",
    "record": "MIL-DTL-3661_60D validation record.pdf",
    "sheet": "MIL-DTL-3661_60D 3D model.pdf",
    "parts": "MIL-DTL-3661_60D parts list.pdf",
    "inspection": "MIL-DTL-3661_60D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/LH93_3-freecad.png",
    "pair": "Models/views/LH93_3-pair.png",
    "record": "Models/views/LH93_3-record.png",
    "front": "Models/views/LH93_3-front.png",
    "top": "Models/views/LH93_3-top.png",
    "right": "Models/views/LH93_3-right.png",
    "cut": "Models/views/LH93_3-cut.png"
   },
   "shown_part": "LH93/3",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style LH93 indicator light transformer, one for each of the four Table I type designations, all the same Figure 1 outline: a 1.082 square prism the full 3 MAX length with two flat mounting ears at mid-length carrying .1875 diameter through holes 1.500 apart.",
   "not_modeled": [
    "The transformer core and windings, the upper and lower terminal blocks, the brass shell wall and the eight drill-and-pin joints, none of which Figure 1 dimensions; each solid is one body filling the envelope.",
    "The electrical terminals of requirement 6 (6-32 round head screws 1/4 long in inserts, three on the upper block and two on the lower) and the molded separations at least 1/8 high and 3/32 wide, whose positions Figure 1 does not dimension.",
    "Materials, the black nickel finish, the Table I primary voltages, the 1.8 V \u00b10.1 V at 0.2 A secondary, voltage regulation, 1,000 V a.c. dielectric withstanding voltage, 32 \u00b0C temperature rise, shock and vibration; the primary voltage is recorded as a parameter only.",
    "The \u00b1.015 tolerances are checked but not built as limit-of-size variants."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 3340a99202d0.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "680 of 682 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (16 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 44 of 44 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D, 24 January 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 gives no thickness or outline for the mounting ears, and does not show where they sit through the depth of the shell, so the mounting face and the ear's fit to its bracket are not defined.",
    "Model. Figure 1 gives only the 3 MAX overall length, with no length for the shell or the terminal blocks and no height for the terminal heads, so the length of the 1.082 square body and the position of the ears along it are not defined."
   ]
  },
  {
   "id": "MIL-DTL-3786/4P",
   "slug": "mil-dtl-3786-4p",
   "title": "Switch, rotary, closed construction, 2 amperes, low level, positive shaft grounding, flux seal, style SR04",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-3786_4P Switch, rotary",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 40,
   "solids": 24,
   "dimensions": 382,
   "dimensions_met": 382,
   "kind": "Detail specification sheet",
   "dated": "24 November 2024",
   "status": "Active, 24 November 2024",
   "newest": "Revision P, 24 November 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 3,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 2
   },
   "stock_examples": [
    "5930-01-006-7826, switch, rotary, M3786/4-0056 (Los Angeles)",
    "5930-01-516-3859, switch, rotary, M3786/4-0008GL (Seawolf)",
    "5930-01-516-3877, switch, rotary, M3786/4-0033GL (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-3786_4P package.pdf",
    "scan": "MIL-DTL-3786_4P legacy scan.pdf",
    "clean": "MIL-DTL-3786_4P clean copy.pdf",
    "record": "MIL-DTL-3786_4P validation record.pdf",
    "sheet": "MIL-DTL-3786_4P 3D model.pdf",
    "parts": "MIL-DTL-3786_4P parts list.pdf",
    "inspection": "MIL-DTL-3786_4P inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M3786_4-0110-freecad.png",
    "pair": "Models/views/M3786_4-0110-pair.png",
    "record": "Models/views/M3786_4-0110-record.png",
    "front": "Models/views/M3786_4-0110-front.png",
    "top": "Models/views/M3786_4-0110-top.png",
    "right": "Models/views/M3786_4-0110-right.png",
    "cut": "Models/views/M3786_4-0110-cut.png"
   },
   "shown_part": "M3786/4-0110",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style SR04-1 single-shaft rotary switch of figure 1, one for each of the 24 outline shapes that the 3,553 table III dash numbers fall on (1 to 12 decks, with shaft-flat angle A of 15\u00b0 or 36\u00b0), each named by the first dash number in table III with that shape.",
   "not_modeled": [
    "Each dash number is not a separate solid: the 3,553 table III dash numbers (each also orderable with the G and L suffixes) differ in outline only by deck count and angle A, so one representative solid is built per shape.",
    "Code-lettered PINs of tables IV to VI (J and K construction, sealed shaft and bushing, no integral tab).",
    "Style SR04-2 concentric-shaft and style SR04-3 ADD-A-POT outlines (figure 1, pages 2 and 3), which no table III column names, and the two variable resistor mounting plates A and B for SR04-3 (figure 1, page 4).",
    "Individual terminal lugs and their positions for each angle of throw and pole count (figure 2), the common terminals, and the deck joint lines on the housing.",
    "Mounting hardware: the two MS25082 hex nuts, including the nut drawn against the housing, and the NASM35333 lockwasher.",
    "Thread form of the .375-32 UNEF-2A bushing, the shaft-end chamfer, the through-bolt ends beyond their nuts, the internal rotor, contacts, detent and stops, and the recommended panel cutouts of figure 3."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "40 pages, 1 scanned. SHA-256 7b0426eea844.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "11,088 of 12,246 items agreed. All 32 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "5,501 checks on size series and limits. 229 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "46 pages of searchable text, 10 tables (11,302 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "24 solids in STEP AP242. 382 of 382 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision P, 24 November 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 locates the integral non-turn tab (.375 \u00b1.015) and gives its projection (.109 +.031 -.060) but not its cross-section, which sets its fit in the .135 dia panel hole of figure 3.",
    "Model. The body length for more than one deck is given as 1.025 \u00b1.062 plus .346 \u00b1.031 per additional deck, without saying whether the per-deck tolerances accumulate; the checks use the worst-case sum (\u00b1.403 at 12 decks)."
   ]
  },
  {
   "id": "MIL-DTL-52404C w/Amendment 1",
   "slug": "mil-dtl-52404c-w-amendment-1",
   "title": "Connections: hose, fire and water",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-52404C w_Amendment 1 Connections-hose, fire and water",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 16,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "30 April 2024",
   "status": "Active, 30 April 2024",
   "newest": "Revision C Amendment 1 (amendment incorporated), 30 April 2024",
   "superseding": "",
   "preparing_activity": "DLA Troop Support - Construction and Equipment Items of Supply Standardizat",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-52404C w_Amendment 1 package.pdf",
    "scan": "MIL-DTL-52404C w_Amendment 1 legacy scan.pdf",
    "clean": "MIL-DTL-52404C w_Amendment 1 clean copy.pdf",
    "record": "MIL-DTL-52404C w_Amendment 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "16 pages, 0 scanned. SHA-256 f29f1ba36aa3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,177 of 4,216 items agreed. All 22 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "30 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "18 pages of searchable text, 1 table (102 cells), 20 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-52404 is a detail specification for fire and water hose connections (Siamese connections, reducers, adapters, couplings, elbows and nipples, Types XIII to XIX) that defines types, classes and nominal thread sizes, materials, threads by FED-STD-H28, plating and an examination schedule, and leaves every part dimension to CECOM Drawings 13218E0469 to 13218E0473 and 13218E0479, its Figures 1 to 20 being undimensioned illustrations.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Amendment 1 (amendment incorporated), 30 April 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-5423/7J",
   "slug": "mil-dtl-5423-7j",
   "title": "Boot, dust and water seal, type B (for pushbutton switches), style 2 (one \u2013 hole mounting, drilled panel), style 2S (RFI-shielded, one \u2013 hole mounting, drilled panel)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-5423_7J Boot, dust and water seal",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 12,
   "dimensions": 84,
   "dimensions_met": 84,
   "kind": "Detail specification sheet",
   "dated": "21 December 2024",
   "status": "Active, 21 December 2024",
   "newest": "Revision J, 21 December 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5930-00-493-5613, boot, dust and moisture seal, M5423/07-06 (Los Angeles, Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-5423_7J package.pdf",
    "scan": "MIL-DTL-5423_7J legacy scan.pdf",
    "clean": "MIL-DTL-5423_7J clean copy.pdf",
    "record": "MIL-DTL-5423_7J validation record.pdf",
    "sheet": "MIL-DTL-5423_7J 3D model.pdf",
    "parts": "MIL-DTL-5423_7J parts list.pdf",
    "inspection": "MIL-DTL-5423_7J inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M5423_07-03-freecad.png",
    "pair": "Models/views/M5423_07-03-pair.png",
    "record": "Models/views/M5423_07-03-record.png",
    "front": "Models/views/M5423_07-03-front.png",
    "top": "Models/views/M5423_07-03-top.png",
    "right": "Models/views/M5423_07-03-right.png",
    "cut": "Models/views/M5423_07-03-cut.png"
   },
   "shown_part": "M5423/07-03",
   "application": "FreeCAD 1.1.4",
   "modeled": "12 envelope solids, one per PIN M5423/07-01 to -12 (sizes 1 to 5 in style 2 and style 2S, and sizes 1 and 2 in clear style 2): a hex of size E over the .160 threaded portion with the mounting thread C as a plain bore, a round dome to height A with a cavity of diameter D and height B, and the .020 panel sealing rib below the bearing face.",
   "not_modeled": [
    "The boundary between the threaded metal insert and the molded silicone rubber is not modeled; each solid is one envelope.",
    "The style 2S silicone rubber with metal-impregnated knitted Monel wire mesh lies inside the envelope and is not modeled, so style 2 and style 2S solids of the same size are identical, and PINs -11 and -12 differ from -01 and -02 only in color.",
    "The permissible rubber overlay on the hex (.005 max) is not added; the hex is at its nominal size.",
    "The steps and shoulder the section draws between the hex and the dome, the rounded corners at the top of the cavity, and the chamfered inner edge of the panel sealing rib are not dimensioned and are not modeled.",
    "The mounting thread is not cut; silicone rubber grade 60, color, the transparent permanent lubricant on the rib, endurance (15,000 cycles for style 2S) and the return force note for style 2S switches are not geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 9a7acb3fef48.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "317 of 318 items agreed. All 1 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "25 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (78 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "12 solids in STEP AP242. 84 of 84 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J, 21 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no outside diameter for the dome and no height for the hex, and the figure is not to scale, so the outside of every solid between the bearing face and the apex (a hex over the full .160 and a dome halfway between D and E) is an assumption that a source drawing or a measured sample must confirm.",
    "Model. The size 5 D cell prints .422( with an unmatched parenthesis that may mark a lost note or tolerance; the models read D as .422."
   ]
  },
  {
   "id": "MIL-DTL-55021/1D",
   "slug": "mil-dtl-55021-1d",
   "title": "Cable, electrical, shielded singles, shielded and jacketed singles, twisted pairs and triples, internal hookup, -40 to 105 \u00b0C",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-55021_1D Cable, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "23 March 2011",
   "status": "Inactive, 19 January 2016",
   "newest": "Revision D Notice 1 - Inactivation, 19 January 2016",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6145-01-145-0850, cable, special purpose, electrical, MIL-C-55021/1 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-55021_1D package.pdf",
    "scan": "MIL-DTL-55021_1D legacy scan.pdf",
    "clean": "MIL-DTL-55021_1D clean copy.pdf",
    "record": "MIL-DTL-55021_1D validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 bf0cad12d9f9.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "377 of 423 items agreed. All 22 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "5 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 3 tables (30 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-55021/1 is a cable construction sheet: Figure 1 only labels the conductor, insulation, braided shield and jacket with no dimensions, and its tables give length of lay by AWG range and minimum and nominal jacket wall thickness by diameter over the shield, with the wires themselves defined by MIL-DTL-16878, so no table fixes a cable outline for any size or part number.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision D Notice 1 - Inactivation, 19 January 2016.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-55302/96F w/AMENDMENT 2",
   "slug": "mil-dtl-55302-96f-w-amendment-2",
   "title": "Connectors, printed circuit subassembly and accessories: receptacle, wrappost (removable) hermaphroditic contacts (.100 inch spacing)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-55302_96F w_AMENDMENT 2 Connectors, printed circuit subassembly and acce",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 4,
   "dimensions": 120,
   "dimensions_met": 119,
   "kind": "Detail specification sheet",
   "dated": "26 May 2020",
   "status": "Active, 3 March 2025",
   "newest": "Revision F Notice 2 - Validation, 3 March 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-01-068-5151, connector, receptacle, electrical, M55302/96-04 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-55302_96F w_AMENDMENT 2 package.pdf",
    "scan": "MIL-DTL-55302_96F w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-DTL-55302_96F w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-DTL-55302_96F w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-DTL-55302_96F w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-DTL-55302_96F w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-DTL-55302_96F w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M55302_96-02-freecad.png",
    "pair": "Models/views/M55302_96-02-pair.png",
    "record": "Models/views/M55302_96-02-record.png",
    "front": "Models/views/M55302_96-02-front.png",
    "top": "Models/views/M55302_96-02-top.png",
    "right": "Models/views/M55302_96-02-right.png",
    "cut": "Models/views/M55302_96-02-cut.png"
   },
   "shown_part": "M55302/96-02",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid models of the four receptacles M55302/96-01 to -04: the molded housing with its mating walls, contact cavity and tail block, both rows of contacts with their .025 square wrapposts, the two hex keying sockets with their .086-56 studs, and the two mounting holes with their hex recesses.",
   "not_modeled": [
    "The spring form of the hermaphroditic contacts and the .120 minimum contact mating area.",
    "The keying positions 1 to 6 and A to F and the socket's indexing features; the hex nuts and washers of the keying hardware, whose position depends on a board thickness the document does not give.",
    "The plan-view corner radii, the scallops along the cavity edges, the insulator outline on the side view and the molded contact identification marks, none of which are dimensioned.",
    "The typical hole cutout in a nonconductive chassis (G, .276, .138 and the .096 holes), which belongs to the chassis, not the receptacle.",
    "The thread form of the .086-56 UNC-2A studs, materials, plating and the electrical and mechanical performance requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 1 scanned. SHA-256 b88f7f739227.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "798 of 821 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "52 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (100 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 119 of 120 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 2 - Validation, 3 March 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Dash 02 prints 28 contacts, but A 2.300 at the .100 contact spacing in two rows gives 48, and the other three dash numbers match that rule (24, 72 and 96); the model carries 48.",
    "Model. Dash 03 prints G 3.600, while G is C + .020 on the other three dash numbers (3.660 here); at 3.600 the chassis cutout is shorter than the 3.640 tail block C it is sized around.",
    "Model. The document does not size the keying socket's outside hex or the depth of its .102 bore; the model uses .156 across the flats, scaled from the drawing, and a bore down to the housing top."
   ]
  },
  {
   "id": "MIL-DTL-83528/1G",
   "slug": "mil-dtl-83528-1g",
   "title": "Gasketing material, conductive, shielding gasket, electronic, elastomer, EMI/RFI, circular strip, .040 through .250 diameter",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-DTL-83528_1G Gasketing material, conductive",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 13,
   "dimensions": 65,
   "dimensions_met": 65,
   "kind": "Detail specification sheet",
   "dated": "28 November 2023",
   "status": "Active, 28 November 2023",
   "newest": "Revision G, 28 November 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5999-01-500-2099, gasketing material, conductive, M83528/001A006 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-DTL-83528_1G package.pdf",
    "scan": "MIL-DTL-83528_1G legacy scan.pdf",
    "clean": "MIL-DTL-83528_1G clean copy.pdf",
    "record": "MIL-DTL-83528_1G validation record.pdf",
    "sheet": "MIL-DTL-83528_1G 3D model.pdf",
    "parts": "MIL-DTL-83528_1G parts list.pdf",
    "inspection": "MIL-DTL-83528_1G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M83528_001X007-freecad.png",
    "pair": "Models/views/M83528_001X007-pair.png",
    "record": "Models/views/M83528_001X007-record.png",
    "front": "Models/views/M83528_001X007-front.png",
    "top": "Models/views/M83528_001X007-top.png",
    "right": "Models/views/M83528_001X007-right.png",
    "cut": "Models/views/M83528_001X007-cut.png"
   },
   "shown_part": "M83528/001X007",
   "application": "FreeCAD 1.1.4",
   "modeled": "Thirteen solid round strip gaskets, one per Table I dash number M83528/001X001 to X013, each a straight cylinder of diameter A from .040 to .250 at a representative 1.000 in length.",
   "not_modeled": [
    "The length, which note 2 leaves to the purchase order; every solid is cut at 1.000 in.",
    "The molding flash of note 3 (\u00b1 .008 on the extension, \u00b1 .005 on the thickness), whose nominal size and position the sheet does not give.",
    "The eleven material types A, B, C, D, E, F, H, J, K, L and M that replace the X in the PIN; they share one geometry, so each solid stands for all eleven PINs of its dash number (143 PINs in all).",
    "The Table I cross-section area column, a reference value for volume resistivity, which is not checked; printed to .001 cm\u00b2, it equals \u03c0/4 A\u00b2 at the nominal A on eight rows, while 003, 006, 007, 010 and 013 differ by .0005 to .0011 cm\u00b2 (010 prints .099 cm\u00b2, while .139 in gives .0979 cm\u00b2).",
    "The Table II supersession cross-reference to DESC drawing 85103, which carries no geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 b08c017266ed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "336 of 355 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "45 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (65 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "13 solids in STEP AP242. 65 of 65 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G, 28 November 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-F-3541C",
   "slug": "mil-f-3541c",
   "title": "Fittings, lubrication, general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-F-3541C Fittings, lubrication",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 19,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "28 Feb 1989",
   "status": "Canceled, 12 July 2002",
   "newest": "Revision C Notice 2 - Cancellation, 12 July 2002",
   "superseding": "SAE-AS35411",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1,
    "Ohio": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "4730-00-172-0041, fitting, lubrication, MIL-F-3541 (Los Angeles, Ohio, Seawolf)"
   ],
   "files": {
    "package": "MIL-F-3541C package.pdf",
    "scan": "MIL-F-3541C legacy scan.pdf",
    "clean": "MIL-F-3541C clean copy.pdf",
    "record": "MIL-F-3541C validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "19 pages, all scanned. SHA-256 2c536fcccb54.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,646 of 3,659 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "18 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 9 tables (178 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-F-3541C is the general specification for threaded lubrication fittings and has no dimensioned part drawing: it sets the eight types by MS sheet, straight or elbow body, thread and material (Table I), the materials, check valves, finishes, maximum opening pressures, tip and ball hardness and case depths, leakage limits and blowout test pressures, inspection and packaging, sizes the hexagonal wrenching flats only by clearance for a 1/4-inch-thick end wrench (3.4.4), and leaves the envelope dimensions to MS15001 to MS15006, MS15720 and MS15721 and the inlet tip contour to MS15000 (3.4.1, 3.4.2), which it does not reproduce; Figures 1 to 3 are undimensioned setups for the extreme angular position and opening pressure, leakage and blowout tests.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 2 - Cancellation, 12 July 2002.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-H-24606B(SH)",
   "slug": "mil-h-24606b-sh",
   "title": "Hose, fire, synthetic fiber, double jacketed, treated for abrasion resistance, with couplings, fire fighting and other water service",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-H-24606B(SH) Hose, fire",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 21,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "12 August 1994",
   "status": "Active, 5 June 2024",
   "newest": "Revision B Notice 1 - Validation, 5 June 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "4210-01-264-3871, hose assembly, nonmetallic, fire f, M24606-150-25 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-H-24606B(SH) package.pdf",
    "scan": "MIL-H-24606B(SH) legacy scan.pdf",
    "clean": "MIL-H-24606B(SH) clean copy.pdf",
    "record": "MIL-H-24606B(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "21 pages, all scanned. SHA-256 1e91bd2a7ecf.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "6,358 of 6,381 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "163 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "17 pages of searchable text, 16 tables (349 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-H-24606B(SH) is the military specification for double jacketed synthetic fiber fire hose with couplings and fixes no part's shape: its seven hose assemblies, M24606-150-25 to M24606-400-50 (Table I), get only a minimum inside diameter equal to the trade size (3.3.4), a length between the inside edges of the couplings (+3 inch, -0, Table VI and 4.5.2.1), a minimum liner thickness (Table II) and a coupling thread (Table VII), with no outside diameter or jacket thickness, the couplings are type A, style 1 of WW-C-621, which it does not reproduce (3.3.6), and Figure 1 gives only the snap-ring groove's width A, end land B, wall under the groove C and step D for sizes 150, 175 and 250 and the snap ring's section width (0.125 or 0.156 inch), installed angle (35 \u00b1 3 degrees) and flatness (0.047 inch), with no diameter that places the groove or sizes the ring.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 5 June 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-I-17244E(SHIPS)",
   "slug": "mil-i-17244e-ships",
   "title": "Indicators, temperature, direct-reading, bimetallic, (3 and 5 inch dial)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-I-17244E(SHIPS) Indicators, temperature",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 21,
   "solids": 4,
   "dimensions": 54,
   "dimensions_met": 51,
   "kind": "Military specification",
   "dated": "20 April 1971",
   "status": "Active, 26 February 2021",
   "newest": "Revision E Notice 2 - Validation, 26 February 2021",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6685-01-406-7797, thermometer, self-indicating, bime, MIL-I-17244 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-I-17244E(SHIPS) package.pdf",
    "scan": "MIL-I-17244E(SHIPS) legacy scan.pdf",
    "clean": "MIL-I-17244E(SHIPS) clean copy.pdf",
    "record": "MIL-I-17244E(SHIPS) validation record.pdf",
    "sheet": "MIL-I-17244E(SHIPS) 3D model.pdf",
    "parts": "MIL-I-17244E(SHIPS) parts list.pdf",
    "inspection": "MIL-I-17244E(SHIPS) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 15",
   "pictures": {
    "iso": "Models/views/MIL-I-17244_stem_length_6-freecad.png",
    "pair": "Models/views/MIL-I-17244_stem_length_6-pair.png",
    "record": "Models/views/MIL-I-17244_stem_length_6-record.png",
    "front": "Models/views/MIL-I-17244_stem_length_6-front.png",
    "top": "Models/views/MIL-I-17244_stem_length_6-top.png",
    "right": "Models/views/MIL-I-17244_stem_length_6-right.png",
    "cut": "Models/views/MIL-I-17244_stem_length_6-cut.png"
   },
   "shown_part": "MIL-I-17244 stem length 6",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the parts the sheet dimensions: for each stem length (2, 4, 6 inch), the Figure 2 protective tube and stem assembly as one body (the protective tube as a solid envelope, the bushing with its 3/4-28UNS-2A thread and 9/16 bore, and the 7/8 jam nut of Detail A-A, ending at the top of the jam nut), and the 2 inch well extension of Figure 5.",
   "not_modeled": [
    "The indicator case, dial, window, bezel, pointers, ITM index pointers and reset knob, and the back connected (A) and bottom connected (O) case forms, which Figure 1 draws without dimensions; design, dial size, range and case form change only the case, so one stem solid stands for every designation that ends in its stem length symbol, such as ITD 3 18 A 2 for the 2 inch stem.",
    "The bimetal element, the heat transfer medium and the bore of the protective tube, which the sheet does not size; the protective tube is a solid round bar, as an envelope. The stub Figure 2 draws above the jam nut is not dimensioned and is left off.",
    "The immersion depth mark on the protective tube (C \u00b1 1/32 in the dimension table, C-MAX. on the figure): to the bottom of the bushing on the 2 inch stem, 2 and 3 from the end of the 4 and 6 inch stems; it is a marking.",
    "Thread forms and classes (3/4-28UNS-2A on the bushing and the extension shank, 2B in the extension, the jam nut's internal thread), thread runouts, and the corner chamfers Figure 2 draws on the jam nut without a size; the jam nut is fused to the bushing.",
    "The load test and vibration test set-ups of Figures 3 and 4, the MIL-W-24270 well the indicator and the extension screw into, materials, welds and finishes."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "21 pages, all scanned. SHA-256 a26f1f15d741.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,372 of 5,508 items agreed. 41 differences went to a third reader. 7 readings remain open.",
     "result": "7 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "180 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "22 pages of searchable text, 17 tables (528 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 51 of 54 stated dimensions measure within limits; 3 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 2 - Validation, 26 February 2021. ASSIST also holds Revision E Amendment 5 (21 May 1985). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table IV, row 9, column 3 (Shock - 9 blows, Test paragraph): read as 4.6.5, could be 4.6.8.",
    "Open reading. Page 7, text, last sentence: read as MIL-Q-9858, could be MIL-O-9858.",
    "Open reading. Table V, row 11, column 2: read as ITM, could be ITN.",
    "Open reading. Page 7, text, (ITD or ITM): read as ITM, could be ITN.",
    "Open reading. Table XI, row 5 (ITD 3 18 O 4), column Federal stock numbers, middle group: read as 782, could be 792.",
    "Open reading. Page 16, Drawing number SH6976A, first digit: read as SH6976A, could be SH8976A.",
    "Open reading. Page 17, Drawing number SH6977A, first digit: read as SH6977A, could be SH8977A.",
    "Model. Figure 2 dimensions 7/16 from the top of the bushing thread to the end of the full thread and 9/32 from the same line to the start of the .621 MAX. section, which it draws below the end of the full thread, so both cannot hold; the solids end the thread at 7/16, as Detail A-A (25/32 less 11/32) and the matching 3/4-28UNS-2A shank of Figure 5 also give, and fail the 9/32 check.",
    "Model. Table III gives the 4 inch stem only for the 3 inch dial and ranges 18, 24 and 55, but Table XI lists ITD 5 75 O 4 and ITD 5 75 A 4 with stock numbers, so an engineer must confirm which designations take the 4 inch stem."
   ]
  },
  {
   "id": "MIL-K-3926B",
   "slug": "mil-k-3926b",
   "title": "Knobs, control (for use with electronic, communications, and allied equipment).",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-K-3926B Knobs, control",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 13,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "26 July 1968",
   "status": "Canceled, 13 December 2001",
   "newest": "Revision B Notice 3 - Cancellation, 13 December 2001",
   "superseding": "NASM3926",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 2,
    "Seawolf": 1
   },
   "stock_examples": [
    "5355-00-163-7524, knob, MIL-K-3926 (Los Angeles, Seawolf)",
    "5355-00-667-9826, knob, MIL-K-3926 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-K-3926B package.pdf",
    "scan": "MIL-K-3926B legacy scan.pdf",
    "clean": "MIL-K-3926B clean copy.pdf",
    "record": "MIL-K-3926B validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "13 pages, all scanned. SHA-256 36bdcb3514b8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,165 of 5,211 items agreed. 25 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "10 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 6 tables (223 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-K-3926B is the military specification for manually operated control knobs and knob locks for electronic, communications and allied equipment and has no dimensioned knob drawing: it sets marking materials, the insert and setscrews (a molded-in metallic insert with two UNC-3B tapped holes and a 1/32 \u00b1 1/64 inch 45 degree chamfer, two No. 4-40 or No. 8-32 UNC-3A setscrews 90 to 125 degrees apart with heads 0.015 to 0.240 inch below the knob surface when seated), 0.025 inch TIR concentricity and \u00b13 degree perpendicularity, color, marking, finish, environmental, torque, tensile and flammability tests, qualification, inspection and packaging, and leaves each knob's form and dimensions to the MS standards listed in Supplement 1 (3.1, 3.4.1), which it does not reproduce; Figure I is a setscrew torque test fixture with no dimensions, Table V gives setscrew test torques (7 and 22 inch-pounds) and Table VI gives dial skirt and plate tensile forces by knob diameter (20, 30 and 50 pounds).",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 3 - Cancellation, 13 December 2001. ASSIST also holds Revision B Amendment 1 (25 February 1981) and Revision B Amendment 2 (9 March 2001). They were issued after this revision and are not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table III, row 2 (Torque (at room ambient, Subgroup I), column 2: read as 3.5 & 3.6, could be 3.5 & 8.6."
   ]
  },
  {
   "id": "MIL-L-24532(SH)",
   "slug": "mil-l-24532-sh",
   "title": "Light, marker, distress, floating, flashing, automatic",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-L-24532(SH) Light, marker",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 14,
   "solids": 5,
   "dimensions": 70,
   "dimensions_met": 70,
   "kind": "Military specification",
   "dated": "17 May 1976",
   "status": "Canceled, 11 October 1989",
   "newest": "Notice 1 - Cancellation, 11 October 1989",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6230-01-143-4778, light, marker, distress, MIL-L-24532 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-L-24532(SH) package.pdf",
    "scan": "MIL-L-24532(SH) legacy scan.pdf",
    "clean": "MIL-L-24532(SH) clean copy.pdf",
    "record": "MIL-L-24532(SH) validation record.pdf",
    "sheet": "MIL-L-24532(SH) 3D model.pdf",
    "parts": "MIL-L-24532(SH) parts list.pdf",
    "inspection": "MIL-L-24532(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 7",
   "pictures": {
    "iso": "Models/views/MIL-L-24532_figure_3_base_cone-freecad.png",
    "pair": "Models/views/MIL-L-24532_figure_3_base_cone-pair.png",
    "record": "Models/views/MIL-L-24532_figure_3_base_cone-record.png",
    "front": "Models/views/MIL-L-24532_figure_3_base_cone-front.png",
    "top": "Models/views/MIL-L-24532_figure_3_base_cone-top.png",
    "right": "Models/views/MIL-L-24532_figure_3_base_cone-right.png",
    "cut": "Models/views/MIL-L-24532_figure_3_base_cone-cut.png"
   },
   "shown_part": "MIL-L-24532 figure 3 base cone",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the five parts MIL-L-24532 draws with printed values, one size each: the lens with its detail A skirt (figure 1), the case at its 25-3/4 maximum length (figure 2), the base cone (figure 3), the outside envelope of the electronic flashing circuit unit to 5-1/4 (figure 4) and the battery retainer plug with its disk (figure 5).",
   "not_modeled": [
    "The knurl or rib to facilitate removal on the lens and the base cone, which the figures place but do not size.",
    "The 0.005R. radii on the outer corners of the O-ring groove (detail A), whose last figure is an open reading (0.005 or 0.006); those corners are sharp.",
    "The radius at the tip of the base cone, printed \"R.\" with no value; the solid comes to a point.",
    "The thread form of the 2-13/16-18 UN threads (2A on the lens and base cone, 2B in the case).",
    "Inside the case: the 1/8 minimum polycarbonate discs that close the middle compartment, the foam and the wires (3.3.2.2), which have no positions.",
    "Inside the flashing circuit unit: the flash tube and its elastomeric compound, the magnetic switch assembly, the 2-3/16 D. terminal block 3/4 high, and the terminal studs, nuts and lugs 1/2 either side of the center.",
    "The plastic protective cap over the flash tube, which figure 4 sizes only by its 7/8 inside diameter, to suit the sleeve.",
    "The retainer plug's screw, upset to prevent removal, and its U-shaped handle (1/2 APPROX. clear of the disk, 1 1/4 APPROX. over the legs, welded, brazed or riveted if brass), which have no wire or screw size.",
    "The 1-inch O ring of 1/8 inch wire molded into the base cone and its ballast (3.3.2.3), the O-ring gaskets, the battery, the mounting bracket, materials, colors and marking."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, all scanned. SHA-256 6f1d839d56fa.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,656 of 2,681 items agreed. 15 differences went to a third reader. 3 readings remain open.",
     "result": "3 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "26 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 3 tables (52 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "5 solids in STEP AP242. 70 of 70 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Notice 1 - Cancellation, 11 October 1989. ASSIST also holds Amendment 1 (8 February 1980). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 2, Xenon: read as xenon, could be xencn.",
    "Open reading. Figure 1, Detail A, both radius callouts at the groove corners: read as 0.005R., could be 0.006R.",
    "Open reading. Page 6, Drawing number, letter between the dashes: read as 815-F-1197249, could be 815-P-1197249.",
    "Model. Figure 4 gives the plastic protective cap over the flash tube only its 7/8 I.D. to suit the sleeve, with no outside diameter or height, and draws it rising above 5-1/4, the highest level dimensioned; the envelope stops at 5-1/4 on the 7/8 sleeve, and an engineer must size the cap before the unit's fit in the lens can be checked.",
    "Model. Figure 3 calls for a radius at the tip of the base cone (\"R.\") but prints no value; the solid comes to a point at 3-1/8, and an engineer must set the radius."
   ]
  },
  {
   "id": "MIL-M-12320A(SigC)",
   "slug": "mil-m-12320a-sigc",
   "title": "Mast bases, sections, and adapter kit",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-M-12320A(SigC) Mast bases, sections",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 19,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "17 July 1958",
   "status": "Canceled, 21 December 1998",
   "newest": "Revision A Notice 2 - Cancellation, 21 December 1998",
   "superseding": "",
   "preparing_activity": "US Army Combat Capabilities Development Command, C5ISR Center",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5985-00-238-7474, mast section, MIL-M-12320 (Los Angeles, Seawolf)"
   ],
   "files": {
    "package": "MIL-M-12320A(SigC) package.pdf",
    "scan": "MIL-M-12320A(SigC) legacy scan.pdf",
    "clean": "MIL-M-12320A(SigC) clean copy.pdf",
    "record": "MIL-M-12320A(SigC) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "19 pages, all scanned. SHA-256 9332eaf651b0.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,852 of 5,026 items agreed. 24 differences went to a third reader. 2 readings remain open. 1 value that the scan prints in a doubtful form is listed for the engineer.",
     "result": "2 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 7 tables (96 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-M-12320A is the military specification for Mast Bases AB-15( )/GR, MP-65( ) and MP-76( ), Mast Sections AB-21( )/GR to AB-24( )/GR and MS-116( ) to MS-118( ), Antenna Spring Section AB-129( )/PR and Adapter Kit M-459 and has no drawing or dimension table: it sets service conditions, performance requirements and their tests (a 500 pound axial pull on assembled section threads, wire soldering, a 150 inch-pound torque on the base subassembly, neoprene bonding and cold bend, a bending moment of 600 to 800 inch-pounds for MP-65( ) and MP-76( ) and 180 to 260 inch-pounds for AB-15( )/GR and AB-129( )/PR at a 90 degree bend, 2500 or 1500 shock blows, and a mast section bend test in the jig of drawings SC-D-17226 to SC-D-17228), inspection Tables I to IV, packaging defect Tables V and VI and packaging, gives only approximate section lengths (about 3 feet for MS-116( ) to MS-118( ) and about 23 inches for AB-21( )/GR to AB-24( )/GR), and requires each item to be fabricated to its Signal Corps drawing (SC-DL-73589, SC-DL-83061, SC-DL-100579, SC-DL-100580, SC-DL-100581, SC-DL-100586 or SC-DL-100588), none of which it reproduces.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 2 - Cancellation, 21 December 1998. ASSIST also holds Revision A Amendment 4 (14 September 1973). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Paragraph 3.5.2(b) prints the operating temperature range as -150\u00b0F to -65\u00b0F, with a clear minus sign before 150. The next sentence calls 150\u00b0F the high temperature that includes the effect of sun-load, and 3.5.1(a) prints the storage range as +160\u00b0F to -80\u00b0F.",
    "Open reading. Page 10, last sentence, \"Mast Bases MP-76( ) and AB-129( )/PR\": read as MP-76( ), could be AP-76( ).",
    "Open reading. Table VI, row 1, column MAJOR, item 15: read as NAP, could be MAP."
   ]
  },
  {
   "id": "MIL-M-38510J",
   "slug": "mil-m-38510j",
   "title": "Microcircuits, general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-M-38510J Microcircuits, general specification for",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 93,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "15 November 1991",
   "status": "Inactive, 12 January 2018",
   "newest": "Revision J Notice 4 - Validation, 12 January 2018",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5962-00-264-3560, microcircuit, digital, M38510-02105BCC (Los Angeles)"
   ],
   "files": {
    "package": "MIL-M-38510J package.pdf",
    "scan": "MIL-M-38510J legacy scan.pdf",
    "clean": "MIL-M-38510J clean copy.pdf",
    "record": "MIL-M-38510J validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "93 pages, all scanned. SHA-256 17c1c84963ec.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "38,004 of 40,429 items agreed. All 126 differences were settled against the page image. A second pass settled 1 from a second printing in the document.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1,045 checks on size series and limits. 63 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "55 pages of searchable text, 37 tables (4,171 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-M-38510J sets qualification, inspection, finish and marking rules for microcircuits and draws no case outline (see MIL-STD-1835).",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision J Notice 4 - Validation, 12 January 2018. ASSIST also holds Revision J Amendment 1 (1 July 1992). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table B-II, column '20 / Ltpd': 40 then 43. Page 63 prints 40 at n = 4 and 43 at n = 5 (C = 0, N = 20), confirmed on crops/page 63-the table on page 1-c0-N20-30-n2to10-x4.png. The printed 43 looks wrong for its series: LTPD must fall as n rises, the hypergeometric value is 33 and the N = 30 column prints 34 at n = 5; a point for an engineer.",
    "Printed value to confirm. Table B-II, column '120 / AQL': 0.06 then 0.07. Page 63 prints AQL 0.06 at n = 64 and 0.07 at n = 80 (C = 0, N = 120), confirmed on crops/page 63-the table on page 1-c0-n64to80-N100to200-zoom.png. The printed values look wrong for their series: AQL must fall as n rises, the hypergeometric values are 0.08 and 0.06, and the N = 80 and 100 columns print 0.08 at n = 64; a point for an engineer.",
    "Printed value to confirm. Table B-II, column '150 / AQL': 0.06 then 0.07. Page 63 prints AQL 0.06 at n = 64 and 0.07 at n = 80 (C = 0, N = 150), the same pattern as N = 120, 160 and 200. The printed values look wrong for their series: AQL must fall as n rises and the hypergeometric values are 0.08 and 0.06; a point for an engineer.",
    "Printed value to confirm. Table B-II, column '160 / AQL': 0.06 then 0.07. Page 63 prints AQL 0.06 at n = 64 and 0.07 at n = 80 (C = 0, N = 160), the same pattern as N = 120, 150 and 200. The printed values look wrong for their series: AQL must fall as n rises and the hypergeometric values are 0.08 and 0.06; a point for an engineer.",
    "Printed value to confirm. Table B-II, column '200 / AQL': 0.06 then 0.07. Page 63 prints AQL 0.06 at n = 64 and 0.07 at n = 80 (C = 0, N = 200), the same pattern as N = 120, 150 and 160. The printed values look wrong for their series: AQL must fall as n rises and the hypergeometric values are 0.08 and 0.06; a point for an engineer.",
    "Printed value to confirm. Table B-II, column '200 / Ltpd': 2.2 then 2.3. Page 63 prints LTPD 3.3 at n = 125, 2.2 at n = 128 and 2.3 at n = 160 (C = 2, N = 200), confirmed on crops/page 63-the table on page 1-c2-N200-n125to160-x5.png, where both digits of 2.2 have the flat base of a 2 under the row rule. The printed 2.2 at n = 128 looks wrong for its series: the hypergeometric value is 3.2 (3.3 at n = 125, 2.3 at n = 160); a point for an engineer."
   ]
  },
  {
   "id": "MIL-M-38510/116A",
   "slug": "mil-m-38510-116a",
   "title": "Microcircuits, linear, cmos, analog switch with driver, monolithic silicon",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-M-38510_116A Microcircuits, linear",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 58,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "4 February 2004",
   "status": "Active, 11 April 2023",
   "newest": "Revision A Notice 4 - Validation, 11 April 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5962-01-234-7732, microcircuit, linear, MIL-M-38510/116 (Los Angeles, Seawolf)"
   ],
   "files": {
    "package": "MIL-M-38510_116A package.pdf",
    "scan": "MIL-M-38510_116A legacy scan.pdf",
    "clean": "MIL-M-38510_116A clean copy.pdf",
    "record": "MIL-M-38510_116A validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "58 pages, 0 scanned. SHA-256 07280c4f6fbd.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "27,002 of 31,701 items agreed. 193 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "1,546 checks on size series and limits. 26 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "84 pages of searchable text, 24 tables (27,790 cells), 19 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-M-38510/116A is a detail specification for CMOS analog switch with driver microcircuits (device types 01 to 08) that sets electrical limits, test circuits, terminal connections, thermal ratings and inspection requirements, and sends the dimensions of case outlines C (GDIP1-T14/CDIP2-T14), D (GDFP1-F14/CDFP2-F14) and I (MACY1-X10) to MIL-STD-1835; none of its figures or tables gives a dimension.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 4 - Validation, 11 April 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 10, callout VO (output voltage): read as VO, could be V0."
   ]
  },
  {
   "id": "MIL-M-38510/21F",
   "slug": "mil-m-38510-21f",
   "title": "Microcircuits, digital, bipolar, ttl, low power, flip-flops, monolithic silicon",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-M-38510_21F Microcircuits, digital",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 44,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "15 February 2006",
   "status": "Inactive, 6 October 2020",
   "newest": "Revision F Notice 2 - Validation, 6 October 2020",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5962-00-264-3560, microcircuit, digital, MIL-M-38510/21 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-M-38510_21F package.pdf",
    "scan": "MIL-M-38510_21F legacy scan.pdf",
    "clean": "MIL-M-38510_21F clean copy.pdf",
    "record": "MIL-M-38510_21F validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "44 pages, 0 scanned. SHA-256 7ac149a5f523.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "14,293 of 18,876 items agreed. 452 differences went to a third reader. 3 readings remain open.",
     "result": "3 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "664 checks on size series and limits. 49 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "65 pages of searchable text, 19 tables (14,792 cells), 17 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-M-38510/21F is a detail specification for low-power TTL bipolar flip-flop microcircuits (device types 01 to 05) that sets electrical performance limits, truth tables, logic diagrams, terminal connections, switching test circuits and Group A inspection, and fixes case outlines A to D only by their MIL-STD-1835 designators (GDFP5-F14 or CDFP6-F14, GDFP4-F14, GDIP1-T14 or CDIP2-T14, GDFP1-F14 or CDFP2-F14), with no drawing or table that gives package dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision F Notice 2 - Validation, 6 October 2020.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table III, row 80 (test 78 CKT A), Measured terminal: read as Clear1/\u0304Q\u0332\u03041, could be Clear1/Q\u0332\u03041\u0304.",
    "Open reading. Table III, row 104 (test 90 CKT A), Measured terminal: read as Clock1/\u0304Q\u0332\u03041\u0304, could be Clock1/Q\u0332\u03041\u0304.",
    "Open reading. Table III, row 140 (test 110 CKT A), Measured terminal: read as Clock1/\u0304Q\u0332\u03041\u0304, could be Clock1/Q\u0332\u03041\u0304."
   ]
  },
  {
   "id": "MIL-M-38510/22D",
   "slug": "mil-m-38510-22d",
   "title": "Microcircuits, digital, bipolar, high-speed ttl, flip-flops, monolithic silicon",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-M-38510_22D Microcircuits, digital",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 47,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "12 August 2005",
   "status": "Inactive, 6 January 2025",
   "newest": "Revision D Notice 3 - Validation, 6 January 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5962-00-333-8323, microcircuit, digital, MIL-M-38510/22 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-M-38510_22D package.pdf",
    "scan": "MIL-M-38510_22D legacy scan.pdf",
    "clean": "MIL-M-38510_22D clean copy.pdf",
    "record": "MIL-M-38510_22D validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "47 pages, 0 scanned. SHA-256 0bef76242125.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "17,119 of 19,278 items agreed. All 641 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "954 checks on size series and limits. 42 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "66 pages of searchable text, 20 tables (15,605 cells), 17 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-M-38510/22 is a detail specification for TTL J-K flip-flop microcircuits that defines electrical ratings, terminal connections, truth tables and test circuits, and names its case outlines A to F only by MIL-STD-1835 designators without giving any package dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision D Notice 3 - Validation, 6 January 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-M-38510/328C",
   "slug": "mil-m-38510-328c",
   "title": "Microcircuits, digital, bipolar, low-power schottky ttl, bus transceivers with three state outputs, monolithic silicon",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-M-38510_328C Microcircuits, digital",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 71,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "18 November 2003",
   "status": "Inactive, 9 June 2023",
   "newest": "Revision C Notice 3 - Validation, 9 June 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5962-01-102-7611, microcircuit, digital, MIL-M-38510/328 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-M-38510_328C package.pdf",
    "scan": "MIL-M-38510_328C legacy scan.pdf",
    "clean": "MIL-M-38510_328C clean copy.pdf",
    "record": "MIL-M-38510_328C validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "71 pages, 0 scanned. SHA-256 9c35f5f6f37b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "56,079 of 57,878 items agreed. All 1,428 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "2,582 checks on size series and limits. 20 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "126 pages of searchable text, 58 tables (53,604 cells), 7 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-M-38510/328 defines low-power Schottky TTL bus transceiver microcircuits by electrical limits, logic diagrams, truth tables, test circuits and group A inspection, and names its case outlines only by MIL-STD-1835 designator without giving any package dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision C Notice 3 - Validation, 9 June 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-M-38510/348C",
   "slug": "mil-m-38510-348c",
   "title": "Microcircuits, digital, bipolar, advanced schottky ttl, bus transceivers with three-state outputs, monolithic silicon",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-M-38510_348C Microcircuits, digital",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 37,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "6 May 2004",
   "status": "Active, 14 July 2023",
   "newest": "Revision C Notice 4 - Validation, 14 July 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5962-01-257-5983, microcircuit, digital, MIL-M-38510/348 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-M-38510_348C package.pdf",
    "scan": "MIL-M-38510_348C legacy scan.pdf",
    "clean": "MIL-M-38510_348C clean copy.pdf",
    "record": "MIL-M-38510_348C validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "37 pages, 0 scanned. SHA-256 2f3fcc5c5f7c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "23,760 of 24,038 items agreed. All 180 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "985 checks on size series and limits. 32 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "71 pages of searchable text, 22 tables (21,440 cells), 7 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-M-38510/348 is a detail specification for advanced Schottky TTL bus transceiver microcircuits that defines electrical performance, terminal connections, truth tables, switching tests and inspection requirements, and takes its case outlines by designator from MIL-STD-1835 without giving any package dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 4 - Validation, 14 July 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-M-38510/53F",
   "slug": "mil-m-38510-53f",
   "title": "Microcircuits, digital, cmos, complimentary pair plus inverter, and-or-select exclusive or gates, expandable 8-INPUT gate monolithic silicon",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-M-38510_53F Microcircuits, digital",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 73,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "13 December 2004",
   "status": "Active, 21 June 2019",
   "newest": "Revision F Notice 3 - Validation, 21 June 2019",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5962-01-286-2252, microcircuit, digital, MIL-M-38510/53 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-M-38510_53F package.pdf",
    "scan": "MIL-M-38510_53F legacy scan.pdf",
    "clean": "MIL-M-38510_53F clean copy.pdf",
    "record": "MIL-M-38510_53F validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "73 pages, 0 scanned. SHA-256 4cfdedeca9fb.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "35,281 of 36,697 items agreed. All 242 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "2,868 checks on size series and limits. 16 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "86 pages of searchable text, 44 tables (38,693 cells), 19 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-M-38510/53F is a detail specification for CMOS digital microcircuits (device types 01 to 04 and 51 to 54) that sets electrical ratings, test limits, terminal connections, logic diagrams, test circuits and screening, and sends every case outline to MIL-STD-1835 by descriptive designator; its only dimensions are the 0.100 in (2.54 mm) maximum A dimension for outlines X, Y and Z and a .000 in minimum S1 in a footnote, with no drawing or table that fixes the package shape.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 3 - Validation, 21 June 2019.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-M-38510/70C",
   "slug": "mil-m-38510-70c",
   "title": "Microcircuits, digital, bipolar, schottky ttl, nand gates, monolithic silicon",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-M-38510_70C Microcircuits, digital",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 49,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "2 November 2005",
   "status": "Inactive, 27 February 2025",
   "newest": "Revision C Notice 3 - Validation, 27 February 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5962-01-044-4606, microcircuit, digital, MIL-M-38510/70 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-M-38510_70C package.pdf",
    "scan": "MIL-M-38510_70C legacy scan.pdf",
    "clean": "MIL-M-38510_70C clean copy.pdf",
    "record": "MIL-M-38510_70C validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "49 pages, 0 scanned. SHA-256 65f77b90f311.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "23,443 of 24,017 items agreed. All 341 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1,035 checks on size series and limits. 31 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "70 pages of searchable text, 27 tables (21,037 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-M-38510/70C is a detail specification for Schottky TTL NAND gate microcircuits (device types 01 to 10) that sets electrical ratings, Table I electrical limits, test circuits, truth tables, terminal connections and screening and inspection requirements, and names its case outlines only by MIL-STD-1835 designator (GDFP5-F14, GDIP1-T14, CQCC1-N20 and others) with no package dimensions of its own.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision C Notice 3 - Validation, 27 February 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-M-38510/80F",
   "slug": "mil-m-38510-80f",
   "title": "Microcircuits, digital, bipolar, schottky ttl, and gates, monolithic silicon",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-M-38510_80F Microcircuits, digital",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 18,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "15 February 2006",
   "status": "Inactive, 5 October 2020",
   "newest": "Revision F Notice 2 - Validation, 5 October 2020",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5962-01-043-1644, microcircuit, digital, MIL-M-38510/80 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-M-38510_80F package.pdf",
    "scan": "MIL-M-38510_80F legacy scan.pdf",
    "clean": "MIL-M-38510_80F clean copy.pdf",
    "record": "MIL-M-38510_80F validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, 0 scanned. SHA-256 69420fa6a6cb.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "9,241 of 9,440 items agreed. All 166 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "361 checks on size series and limits. 12 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "27 pages of searchable text, 16 tables (7,174 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-M-38510/80F is a detail specification for Schottky TTL AND gate microcircuits (device types 01 to 04) that names its case outlines only by MIL-STD-1835 designator without dimensions, and defines terminal connections, truth tables, switching test circuits and waveforms, electrical limits in Table I, and Group A test conditions in Table III, so it fixes no part shape by dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision F Notice 2 - Validation, 5 October 2020.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-M-38527D",
   "slug": "mil-m-38527d",
   "title": "Mounting pads, electrical-electronic component, general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-M-38527D Mounting pads, electrical-electronic component",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 8,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "6 Nov 1992",
   "status": "Canceled, 17 March 2000",
   "newest": "Revision D Notice 2 - Cancellation, 17 March 2000",
   "superseding": "A-A-55485",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5999-01-338-0995, mounting pad, electrical-electron, MIL-M-38527 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-M-38527D package.pdf",
    "scan": "MIL-M-38527D legacy scan.pdf",
    "clean": "MIL-M-38527D clean copy.pdf",
    "record": "MIL-M-38527D validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, all scanned. SHA-256 681982bab2a5.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,785 of 1,843 items agreed. 54 differences went to a third reader. A second pass settled 1 from a second printing in the document. 3 readings remain open. 1 mark outside the technical content is kept as transcription notes.",
     "result": "3 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "18 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 5 tables (276 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-M-38527D is the general specification for mounting pads for small electrical and electronic devices and has no drawing or dimension table: it sets the PIN format, the materials (table I), color, feet shape, a 0.010 inch limit on gate protrusion, a .005 inch limit on through-hole flash (.002 inch for material D), sampling inspection (table II), packaging and the supersession of earlier PINs (6.4), and leaves design and dimensions to specification sheets MIL-M-38527/1 to /11 and Supplement 1, which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision D Notice 2 - Cancellation, 17 March 2000.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 1, End of paragraph 1.2.1: read as example:, could be example.",
    "Open reading. Page 5, End of paragraph 6.2: read as as a minimum:, could be as a minimum.",
    "Open reading. Page 6, End of item b: read as (Federal Stock Class 5970):, could be (Federal Stock Class 5970)."
   ]
  },
  {
   "id": "MIL-M-38527/2B",
   "slug": "mil-m-38527-2b",
   "title": "Mounting pads, electrical-electronic component, .200 or .230 diameter pin center",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-M-38527_2B Mounting pads, electrical-electronic component",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 29,
   "solids": 47,
   "dimensions": 471,
   "dimensions_met": 471,
   "kind": "Military specification sheet",
   "dated": "16 February 1990",
   "status": "Canceled, 17 March 2000",
   "newest": "Revision B Notice 2 - Cancellation, 17 March 2000",
   "superseding": "A-A-55485/2",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5999-01-338-0995, mounting pad, electrical-electron, M38527/02-014N (Los Angeles)"
   ],
   "files": {
    "package": "MIL-M-38527_2B package.pdf",
    "scan": "MIL-M-38527_2B legacy scan.pdf",
    "clean": "MIL-M-38527_2B clean copy.pdf",
    "record": "MIL-M-38527_2B validation record.pdf",
    "sheet": "MIL-M-38527_2B 3D model.pdf",
    "parts": "MIL-M-38527_2B parts list.pdf",
    "inspection": "MIL-M-38527_2B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M38527_02-026-freecad.png",
    "pair": "Models/views/M38527_02-026-pair.png",
    "record": "Models/views/M38527_02-026-record.png",
    "front": "Models/views/M38527_02-026-front.png",
    "top": "Models/views/M38527_02-026-top.png",
    "right": "Models/views/M38527_02-026-right.png",
    "cut": "Models/views/M38527_02-026-cut.png"
   },
   "shown_part": "M38527/02-026",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid for each of the 47 mounting pads of figure 1, M38527/02-001 to -047, built from the values printed on that pad's drawing: outline and thickness, lead holes and countersinks, feet, centre holes, slots, lobes and tabs; each solid serves both material suffixes, N and D, of its dash number.",
   "not_modeled": [
    "Table I's supersession data and the materials (suffix N nylon, suffix D diallyl phthalate), which do not change the shape.",
    "Note 4 allowances: the .010 radius permitted on corners and edges and the 1\u00b0 draft on the sides; edges are sharp and sides straight.",
    "Gate areas (-011, -036, -037, -038).",
    "Edge and fillet radii without a modeled surface to carry them: -003 .015 RAD, -011 .032 R MAX and .020 R MAX, -013 .015 R and .017 R, -044 .010 R TYP.",
    "Angles and steps whose extent is not dimensioned: -004 30\u00b0 and .005, -011 30\u00b0, -041 30\u00b0 and .005.",
    "-008: the undimensioned centre opening.",
    "-010: the four-pointed centre opening, the .010 +.005 -.000 RAD, and the .005 and .025 of section A-A.",
    "-011: the four-lobed centre opening (.112 R REF, .200 DIA, .010) and the second .020 of section A-A.",
    "-012: the .200 DIA and the .050 DIA x .015 DEEP mark.",
    "-013: the four-sided outline of the centre recess, modeled as the full .210 circle.",
    "-025: the band .025 wide across the face and the .018 and .028 of section A-A.",
    "-028: the bands .068 and .032 wide, 22\u00b030' TYP and .005 TYP MIN.",
    "-037: the .200 DIA, the 60\u00b0 TYP sectors and the .040 by .080 opening at 45\u00b0.",
    "-038: .012 TYP and .015 TYP at the outline.",
    "-043: the eight larger circles the plan view draws between the channels.",
    "-044: the lobe at 50\u00b0 (.040, .070) and the two slots below the side holes.",
    "-045: the .010 DIA of section A-A."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "29 pages, all scanned. SHA-256 05385c755e0e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,298 of 1,740 items agreed. All 136 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "722 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "39 pages of searchable text, 48 tables (1,122 cells), 41 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "47 solids in STEP AP242. 471 of 471 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 2 - Cancellation, 17 March 2000. ASSIST also holds Revision B Amendment 2 (1 June 1992). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. -010: section A-A shows full-thickness material .100 long at the rim and a .025 step at the centre, which does not fit the four through slots the plan view draws; the solid follows the plan view and has no centre opening.",
    "Model. -011: the rim of section A-A has no inside diameter and the four-lobed centre opening has only .112 R REF, .200 DIA and .010; the solid uses a .360 rim bore and no centre opening.",
    "Model. -037: only the cup (.375, .075 high, .010 floor, .010 to .015 wall) and the three .031 R holes are modeled; the .200 DIA, the 60\u00b0 sectors and the .040 by .080 opening at 45\u00b0 need an engineer's reading.",
    "Model. -043: the callout puts the eight .045 feet on a .200 diameter, the circle of the eight holes, while the plan view draws larger circles near .300; the solid puts the feet between the holes on .200.",
    "Model. -008: the plan view and section A-A draw a centre opening about .15 across that the sheet does not dimension; the solid has none.",
    "Model. -012: the two feet on the vertical centre line are not located (the solid puts them tangent inside the .365 boss) and the .200 DIA cannot be tied to a feature.",
    "Model. -025: the band .025 wide across the plan view and the .018 and .028 of section A-A are not explained by the scan, and the countersink depth is not printed.",
    "Model. -028: the .068 and .032 bands and .005 TYP MIN are not explained by the scan; the solid is a flat .010 disc with the six holes where the plan view draws them.",
    "Model. -017, -020, -027 and -030 do not locate their feet; the solids use the .200 lead circle (-017), the .295 circle of -005 (-020), the corners of the .100 hole grid (-027, where the feet reach the rim) and tangent inside the rim (-030).",
    "Model. -023: section A-A gives .060 over the feet and .015 on one face only; the solid puts .015 feet on both faces of a .030 pad.",
    "Model. -001: section A-A gives feet of .020 and .040 on opposite faces and .075 from the .020 feet to the far face; confirm the .040 feet and the .055 pad body that follow.",
    "Model. -003: .100 is read as the foot height on a .030 pad; the extension lines can also be read as .085 feet on a .045 pad with the .015 countersink measured from the feet face.",
    "Model. -038: the .183 DIA disc lies inside the outline that joins the outer feet, so whether it is a raised boss or the web between open windows needs confirming.",
    "Model. -044: the lobe at 50\u00b0 (.040 by .070) and the two slots below the side holes have no height or depth on the sheet, so they are not modeled."
   ]
  },
  {
   "id": "MIL-N-25027/1A",
   "slug": "mil-n-25027-1a",
   "title": "Nut, self-locking, heavy hex, (non-metallic insert) 250\u00b0 and 450\u00b0F, UNJC-3B, 1/4 through 2-1/2 inch nominal diameters, nickel-copper alloy",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-N-25027_1A Nut, self-locking",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 32,
   "dimensions": 384,
   "dimensions_met": 384,
   "kind": "Military specification",
   "dated": "28 April 1995",
   "status": "Canceled, 28 June 2007",
   "newest": "Revision A Notice 2 - Cancellation, 28 June 2007",
   "superseding": "MIL-DTL-32258",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 3,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 2
   },
   "stock_examples": [
    "5310-01-534-2359, nut, self-locking, hexagon, M25027/1-05C (Los Angeles)",
    "5310-01-496-3362, nut, plain, hexagon, M25027/1-40C (Seawolf)",
    "5310-01-504-6295, nut, self-locking, hexagon, MIL-N-25027/1-32C (Seawolf)"
   ],
   "files": {
    "package": "MIL-N-25027_1A package.pdf",
    "scan": "MIL-N-25027_1A legacy scan.pdf",
    "clean": "MIL-N-25027_1A clean copy.pdf",
    "record": "MIL-N-25027_1A validation record.pdf",
    "sheet": "MIL-N-25027_1A 3D model.pdf",
    "parts": "MIL-N-25027_1A parts list.pdf",
    "inspection": "MIL-N-25027_1A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 6",
   "pictures": {
    "iso": "Models/views/M25027_1-16C-freecad.png",
    "pair": "Models/views/M25027_1-16C-pair.png",
    "record": "Models/views/M25027_1-16C-record.png",
    "front": "Models/views/M25027_1-16C-front.png",
    "top": "Models/views/M25027_1-16C-top.png",
    "right": "Models/views/M25027_1-16C-right.png",
    "cut": "Models/views/M25027_1-16C-cut.png"
   },
   "shown_part": "M25027/1-16C",
   "application": "FreeCAD 1.1.4",
   "modeled": "Heavy hex self-locking nuts M25027/1-4C to -40C and the 450\u00b0F V variants, each a single solid of the nickel-copper body and locking collar with the nonmetallic insert region filled to the insert bore.",
   "not_modeled": [
    "Thread form (UNJC-3B per MIL-S-8879); the threaded bore is a plain cylinder at the nominal major diameter.",
    "The nonmetallic locking insert as a separate body and its material; the 250\u00b0F and 450\u00b0F (V) variants share one geometry.",
    "Identification marking, axial strength (Table II) and sampling requirements (Tables III to V).",
    "Rounding or lack of fill at the hex corners next to the bearing chamfer allowed by footnote 3/."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, all scanned. SHA-256 6b5de1def4ee.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,575 of 1,584 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "268 checks on size series and limits. 1 break checked against the scan: it is as printed. 16 values are also printed on 3 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 5 tables (296 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "32 solids in STEP AP242. 384 of 384 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 2 - Cancellation, 28 June 2007. ASSIST also holds Revision A Amendment 1 (31 March 1999). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I prints a wrenching flat height (B) of 1.830 for the 28C nut, larger than the 1.750 printed for the larger 32C nut, while every other row rises with size (24C 1.413, 32C 1.750, 36C 2.063). The 28C value looks wrong for its series and needs confirmation.",
    "Model. Figure 1 shows a locking collar and a nonmetallic insert above the wrenching flats, but the sheet gives no collar diameter, no collar end shape and no insert bore. The engineer must supply these values or accept the modeled envelope (collar diameter 0.9 times minimum F, insert bore at the basic thread minor diameter)."
   ]
  },
  {
   "id": "MIL-P-10971E",
   "slug": "mil-p-10971e",
   "title": "Pin, spring, tubular (coiled and slotted)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-P-10971E Pin, spring",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "23 May 1969",
   "status": "Canceled, 22 March 2000",
   "newest": "Revision E Notice 1 - Cancellation, 22 March 2000",
   "superseding": "NASM 10971",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-P-10971E package.pdf",
    "scan": "MIL-P-10971E legacy scan.pdf",
    "clean": "MIL-P-10971E clean copy.pdf",
    "record": "MIL-P-10971E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, all scanned. SHA-256 d42be918091f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,677 of 2,709 items agreed. All 7 differences were settled against the page image. A second pass settled 3 from a closer look at the page.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "133 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 6 tables (212 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-P-10971E prints no drawing for its Type I (slotted) and Type II (coiled) tubular spring pins: it sets materials, protective finishes, hardness (for beryllium-copper pins by stock thickness, 3.5), minimum double shear loads by nominal size for beryllium-copper and 302 corrosion-resisting steel pins (Tables I and II), straightness gage lengths and tolerances by pin length (3.7) and inspection and test methods, and refers the designs, sizes, dimensions and tolerances to MS9047, MS9048, MS16562, MS171401 thru 171900 and NAS561 for slotted pins and to MS39086, MS51923, MS51987, NAS 561 and NAS 1407 for coiled pins (3.2 and 3.3), which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 1 - Cancellation, 22 March 2000. ASSIST also holds Revision E Amendment 1 (21 November 1980), Revision E Amendment 2 (30 August 1985) and Revision E Amendment 3 (3 April 1992). They were issued after this revision and are not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-P-24503B(SH)",
   "slug": "mil-p-24503b-sh",
   "title": "Packing material, graphitic, corrugated ribbon or textured tape and preformed ring",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-P-24503B(SH) Packing material, graphitic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 16,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "22 August 1991",
   "status": "Active, 22 August 1991",
   "newest": "Revision B, 22 August 1991",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5330-01-507-4464, packing, preformed, M24503TY2CL2GRI2.5X3.375X0.437 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-P-24503B(SH) package.pdf",
    "scan": "MIL-P-24503B(SH) legacy scan.pdf",
    "clean": "MIL-P-24503B(SH) clean copy.pdf",
    "record": "MIL-P-24503B(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "16 pages, all scanned. SHA-256 9ad99f7ab89a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,906 of 3,972 items agreed. All 21 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "14 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 8 tables (136 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-P-24503B(SH) is the military specification for non-woven graphitic packing for steam valve service on naval ships with valve stuffing box temperatures up to 1000 \u00b0F, as type I corrugated ribbon or textured tape and type II preformed rings (1.1, 1.2), and has no part drawing: it sets bulk density, ash and class 2 detrimental material limits (Table I) and the density of finished die-formed and laminated rings (3.2.2.1), gives type I ribbon by size only a 0.015 inch minimum gauge, a width of 0.25, 0.50, 0.75 or 1.00 inch (plus or minus 0.030) and a minimum length of 25 or 50 feet, coiled, spooled or reeled (3.3.1, Table II), with no dimension for its corrugation or texture, gives type II rings only tolerances on inside diameter, outside diameter and thickness (Table III) and zero, one or two cuts at about 45 degrees (3.3.2.1), and leaves each ring's size, inside and outside diameters, number of cuts and rings per set to the order (6.2(f)); Figure 1 is an undimensioned piping schematic of the steam test rig (4.5.4).",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B, 22 August 1991.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-P-46144C",
   "slug": "mil-p-46144c",
   "title": "Plastic sheet, polycarbonate",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-P-46144C Plastic sheet, polycarbonate",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 18,
   "solids": 138,
   "dimensions": 690,
   "dimensions_met": 690,
   "kind": "",
   "dated": "3 June 1986",
   "status": "Canceled, 9 June 2000",
   "newest": "Revision C Notice 1 - Cancellation, 9 June 2000",
   "superseding": "A-A-59502",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "9330-01-493-1970, window, observation, MIL-P-46144 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-P-46144C package.pdf",
    "scan": "MIL-P-46144C legacy scan.pdf",
    "clean": "MIL-P-46144C clean copy.pdf",
    "record": "MIL-P-46144C validation record.pdf",
    "sheet": "MIL-P-46144C 3D model.pdf",
    "parts": "MIL-P-46144C parts list.pdf",
    "inspection": "MIL-P-46144C inspection report.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {
    "iso": "Models/views/M46144XXXXEL-freecad.png",
    "pair": "Models/views/M46144XXXXEL-pair.png",
    "record": "Models/views/M46144XXXXEL-record.png",
    "front": "Models/views/M46144XXXXEL-front.png",
    "top": "Models/views/M46144XXXXEL-top.png",
    "right": "Models/views/M46144XXXXEL-right.png",
    "cut": "Models/views/M46144XXXXEL-cut.png"
   },
   "shown_part": "M46144XXXXEL",
   "application": "FreeCAD 1.1.4",
   "modeled": "Flat rectangular polycarbonate sheets: one solid block for each of the 138 pairs of the 6 Table I sizes (24 by 48 to 72 by 96 in) and the 23 Table II thicknesses (0.0005 to 1.00 in), each standing for all 24 type, class, grade and color designations at that size, and for type IV class 2 structured/profiled sheet only its outside envelope.",
   "not_modeled": [
    "Type, class, grade and color (1.2 and Table III) set the material, its flame resistant and ultraviolet stabilizing additives, its coatings and its color; apart from the type IV class 2 section below they do not change the shape, so the 3,312 part numbers come to 138 solids, each named M46144XXXX followed by its size and thickness letters, with XXXX for the type, class, grade and color designators.",
    "The double-walled, ribbed or corrugated section of type IV class 2 structured/profiled sheet (6.4.5), which the document does not dimension: for that class each solid is only the outside envelope.",
    "The mar resistant coating on both sides of type III sheet and the ultraviolet coating on at least one surface of type IV sheet (3.2), whose thickness the document does not give.",
    "Roll stock, which 3.5.1 offers for sheet 0.030 in and thinner: the document gives no roll width or length and the part number has no letter for it.",
    "Sizes other than those of Table I, which 3.5.1 lets the procuring activity specify.",
    "Property, electrical, flammability, optical, chemical resistance and workmanship requirements (3.3 to 3.11, Tables IV to VI), the marking of individual sheets (5.3.3) and packaging."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, all scanned. SHA-256 e2120990099c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,163 of 3,191 items agreed. All 17 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "6 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 12 tables (295 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "138 solids in STEP AP242. 690 of 690 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 1 - Cancellation, 9 June 2000. ASSIST also holds Revision C Amendment 1 (6 February 1990). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table I gives each size as length and width, such as 610 by 1219 (24 by 48), without saying which figure is the length (+0.250 in up to 48 in, +0.500 in over 48 in, by 3.5.1) and which the width (+0.125 in); the checks take the longer side as the length, but read in the printed order the longer side of every size would be held to +0.125 in, so the engineer must say which applies.",
    "Model. Type IV class 2 sheet is structured/profiled, an extruded sheet with double-walled and ribbed or corrugated configuration (6.4.5), but the document gives no wall thickness, rib spacing or profile, so the engineer must define the section; its solids are only the outside envelope."
   ]
  },
  {
   "id": "MIL-P-5315B",
   "slug": "mil-p-5315b",
   "title": "Packing, preformed, hydrocarbon fuel resistant",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-P-5315B Packing, preformed",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 12,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "2 DECEMBER 1964",
   "status": "Canceled, 28 February 2002",
   "newest": "Revision B Notice 4 - Cancellation, 28 February 2002",
   "superseding": "SAE-AMS-P-5315",
   "preparing_activity": "Air Force Life Cycle Management Center - Aircraft Systems",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-P-5315B package.pdf",
    "scan": "MIL-P-5315B legacy scan.pdf",
    "clean": "MIL-P-5315B clean copy.pdf",
    "record": "MIL-P-5315B validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, all scanned. SHA-256 f0431c49f669.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,364 of 4,501 items agreed. 59 differences went to a third reader. A second pass settled 1 from a second printing in the document. 1 reading remains open. 2 marks outside the technical content are kept as transcription notes.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "18 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "14 pages of searchable text, 3 tables (70 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-P-5315B is the material and test specification for hydrocarbon fuel resistant O-ring packings of one grade: it sets physical properties (Table I) and their allowed variations (Table II), qualification and quality conformance tests, the corrosion test plate metals and packaging, and leaves the shapes and sizes of the packings to MS29512 and MS29513 (1.1, 3.4), which it does not reproduce; Figure 1 dimensions the one-size packing test jig (stem, washer, body and cap) and Figure 2 a suggested temperature retraction apparatus, test equipment rather than parts the specification covers.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 4 - Cancellation, 28 February 2002. ASSIST also holds Revision B Amendment 1 (18 November 1966). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 2, callout at the lower end of the side view, below .500 and .250: read as .595, could be .375."
   ]
  },
  {
   "id": "MIL-P-83461B",
   "slug": "mil-p-83461b",
   "title": "Packing, preformed, petroleum hydraulic fluid resistant, improved performance at 275\u00b0F (135\u00b0C)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-P-83461B Packing, preformed",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 19,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "25 February 1980",
   "status": "Canceled, 1 October 2003",
   "newest": "Revision B Notice 3 - Cancellation, 1 October 2003",
   "superseding": "SAE-AMS-P-83461",
   "preparing_activity": "Air Force Life Cycle Management Center - Aircraft Systems",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-P-83461B package.pdf",
    "scan": "MIL-P-83461B legacy scan.pdf",
    "clean": "MIL-P-83461B clean copy.pdf",
    "record": "MIL-P-83461B validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "19 pages, all scanned. SHA-256 7815c0df382c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,251 of 3,325 items agreed. 64 differences went to a third reader. 1 reading remains open. 2 values that the scan prints in a doubtful form are listed for the engineer.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 10 tables (138 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-P-83461B is the material and test specification for O-ring packings for MIL-H-5606 and MIL-H-83282 petroleum hydraulic fluids from -65\u00b0 to 275\u00b0F and has no part drawing: it recommends a compound formulation and its cure (3.2), sets physical properties (Table I) and their allowed production variations (3.4.1), a 110,000 cycle minimum average in the dynamic cycling test (3.5, 4.7), qualification and quality conformance inspection, the corrosion test plate metals, identification and packaging, and leaves the sizes, dimensions and tolerances of the O-rings to MIL-P-83461/1 (1.2, 3.3), which it does not reproduce; Figures 1 to 3 show the cycle test rig, the one-inch rod test cell and its cylinder assembly with only crank strokes and spacer widths, test equipment rather than parts the specification covers.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 3 - Cancellation, 1 October 2003. ASSIST also holds Revision B Amendment 1 (24 February 1993), Revision B Amendment 2 (10 March 1994) and Revision B Amendment 3 (24 January 1995). They were issued after this revision and are not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 1, callout TO BOOST PUMP, second word, first letter: read as TO BOOST PUMP, could be TO ROOST PUMP.",
    "Printed value to confirm. The typeface prints its capital O and its zero alike; the word is read as O-rings."
   ]
  },
  {
   "id": "MIL-P-83461/1B",
   "slug": "mil-p-83461-1b",
   "title": "Packing, preformed, petroleum hydraulic fluid resistant improved performance at 275\u00b0F (135\u00b0C) sizes and tolerances",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-P-83461_1B Packing, preformed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 349,
   "dimensions": 2094,
   "dimensions_met": 2094,
   "kind": "Military specification sheet",
   "dated": "8 May 1989",
   "status": "Canceled, 1 October 2003",
   "newest": "Revision B Notice 2 - Cancellation, 1 October 2003",
   "superseding": "SAE-AMS-P-83461/1",
   "preparing_activity": "Air Force Life Cycle Management Center - Aircraft Systems",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5331-01-516-2648, o-ring, M83461/1-353 (Los Angeles)",
    "5331-01-412-6068, o-ring, M83461/1-378 (Seawolf)"
   ],
   "files": {
    "package": "MIL-P-83461_1B package.pdf",
    "scan": "MIL-P-83461_1B legacy scan.pdf",
    "clean": "MIL-P-83461_1B clean copy.pdf",
    "record": "MIL-P-83461_1B validation record.pdf",
    "sheet": "MIL-P-83461_1B 3D model.pdf",
    "parts": "MIL-P-83461_1B parts list.pdf",
    "inspection": "MIL-P-83461_1B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/M83461_1-248-freecad.png",
    "pair": "Models/views/M83461_1-248-pair.png",
    "record": "Models/views/M83461_1-248-record.png",
    "front": "Models/views/M83461_1-248-front.png",
    "top": "Models/views/M83461_1-248-top.png",
    "right": "Models/views/M83461_1-248-right.png",
    "cut": "Models/views/M83461_1-248-cut.png"
   },
   "shown_part": "M83461/1-248",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid torus per dash number of Table I and Table II (349 O-rings), with inside diameter ID and round cross-section W at their nominal values.",
   "not_modeled": [
    "The parting-line flash limits of .003 (MAX) and .005 (MAX) shown in section A-A; the solids have a smooth round section with no flash or parting line.",
    "Material, cure, hardness and the performance requirements of MIL-P-83461, which this sheet references but does not dimension."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, all scanned. SHA-256 20907f3ed04b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,332 of 2,375 items agreed. All 35 differences were settled against the page image. A second pass settled 1 from the same value on another sheet of the series. 3 marks outside the technical content are kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1,035 checks on size series and limits. 7 breaks checked against the scan: all are as printed. 1,044 values are also printed on 3 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 3 tables (2,082 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "349 solids in STEP AP242. 2,094 of 2,094 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 2 - Cancellation, 1 October 2003.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-15305F w/AMENDMENT 1",
   "slug": "mil-prf-15305f-w-amendment-1",
   "title": "Coils, electrical, fixed and variable, radio frequency general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-15305F w_AMENDMENT 1 Coils, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 33,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "6 October 2023",
   "status": "Active, 6 October 2023",
   "newest": "Revision F Amendment 1 (amendment incorporated), 6 October 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5950-01-102-6815, coil, radio frequency, MIL-C-15305 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-15305F w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-15305F w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-15305F w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-15305F w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "33 pages, 1 scanned. SHA-256 c42ede0198b7.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "10,471 of 10,625 items agreed. All 48 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "175 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "34 pages of searchable text, 22 tables (473 cells), 17 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-15305 is a general performance specification for fixed and variable radio frequency coils that defines styles, grades and classes (Table I), color coding (Table II), electrical and environmental performance, test methods and inspection, and sends the coil design, terminals and physical dimensions to the specification sheets (3.1, 3.4, 3.4.2); its dimensioned Figures 2 to 11 show test fixtures, shorting bars and test clips, not the coil.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 1 (amendment incorporated), 6 October 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-19207G w/AMENDMENT 2",
   "slug": "mil-prf-19207g-w-amendment-2",
   "title": "Fuseholders, extractor post type, blown fuse, indicating and nonindicating, general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-19207G w_AMENDMENT 2 Fuseholders, extractor post type",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 18,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "14 January 2025",
   "status": "Active, 14 January 2025",
   "newest": "Revision G Amendment 2 (all previous amendments incorporated), 14 January 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5920-00-914-7468, fuseholder, extractor post, M19207-29-0001 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-19207G w_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-19207G w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-19207G w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-19207G w_AMENDMENT 2 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, 0 scanned. SHA-256 0bb30d08606e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "7,962 of 8,008 items agreed. All 31 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "9 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "21 pages of searchable text, 8 tables (257 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-19207G is a general performance specification for extractor post type, blown fuse indicating and nonindicating fuseholders that sets the part-number scheme, materials, performance and test methods, qualification and conformance inspection tables, and a dimensionless block diagram of the shielding-efficiency test setup (Figure 1, 1 meter antenna spacings only), and leaves all physical dimensions to the individual specification sheets (3.1, 3.4).",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Amendment 2 (all previous amendments incorporated), 14 January 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-19207/9N w/AMENDMENT 2",
   "slug": "mil-prf-19207-9n-w-amendment-2",
   "title": "Fusesholders, extractor post type, blown fuse indicating, types FHL18G1 and FHL18G2",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-19207_9N w_AMENDMENT 2 Fusesholders, extractor post type",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 18,
   "dimensions": 207,
   "dimensions_met": 207,
   "kind": "Performance specification sheet",
   "dated": "20 July 2020",
   "status": "Active, 21 April 2025",
   "newest": "Revision N Notice 1 - Validation, 21 April 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5920-00-013-9863, fuseholder, extractor post, MIL-F-19207/9 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-19207_9N w_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-19207_9N w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-19207_9N w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-19207_9N w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-19207_9N w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-19207_9N w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-19207_9N w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/FHL18G2-1-freecad.png",
    "pair": "Models/views/FHL18G2-1-pair.png",
    "record": "Models/views/FHL18G2-1-record.png",
    "front": "Models/views/FHL18G2-1-front.png",
    "top": "Models/views/FHL18G2-1-top.png",
    "right": "Models/views/FHL18G2-1-right.png",
    "cut": "Models/views/FHL18G2-1-cut.png"
   },
   "shown_part": "FHL18G2-1",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the Type FHL18G1 (figure 1) and Type FHL18G2 (figure 2) extractor post fuseholders with the fuse inserted, one per table I part number: the cap and its grip, the gasket, the .625 threaded mounting bushing with its double flat, the hex nut, the rear body and the rear solder lug with its J hole.",
   "not_modeled": [
    "The fuse cavity for the .250 in diameter by 1.250 in long ferrule fuse, the fuse contacts, the incandescent lamp and the table I series resistor; the solids are solid envelopes.",
    "The side solder terminal, which carries the second J hole on figure 1 and the K x L elongated hole (.070 to .110 by .100 to .140) on figure 2, since neither figure locates or sizes the terminal itself.",
    "Figure 2 M (.035 to .045), a slot width in the rear end view, since the figure does not show which part the slot is cut in or how deep it runs.",
    "The thread form of the mounting bushing and the 0.39 in threaded length on figure 1; the bushing is a plain cylinder at the .625 major diameter over its whole length G.",
    "The FHL18G2 panel mounting hole (R .570 to .575 across the flat, S .625 to .635 diameter) and the .187 max panel, which belong to the panel, not the fuseholder.",
    "The O-ring, the lockwasher, the neck behind the FHL18G1 bushing and the collar behind the FHL18G2 hex nut, all drawn without dimensions.",
    "The cap knurl, the rounded cap edges, the PUSH TURN and FUSE markings, the turning arrows and the voltage and type marking."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 cc5d9fc81086.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "551 of 561 items agreed. All 14 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "120 checks on size series and limits. 13 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (184 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "18 solids in STEP AP242. 207 of 207 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision N Notice 1 - Validation, 21 April 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 labels C as the gasket thickness but draws no leader to the gasket, so it does not show whether F ends at the gasket's front or rear face; the solid takes the rear face, as figure 2 draws it, and the other reading shortens the bare bushing behind the gasket by .060."
   ]
  },
  {
   "id": "MIL-PRF-19500/207D W/AMENDMENT 3",
   "slug": "mil-prf-19500-207d-w-amendment-3",
   "title": "Transistor, npn, silicon, switching, medium-power, through-hole mount, types 2N1479, 2N1480, 2N1481 and 2N1482, quality level JAN",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-19500_207D W_AMENDMENT 3 Transistor, npn",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 8,
   "dimensions": 264,
   "dimensions_met": 264,
   "kind": "Performance specification sheet",
   "dated": "19 January 2024",
   "status": "Inactive, 19 January 2024",
   "newest": "Revision D Amendment 3 (all previous amendments incorporated), 19 January 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5961-00-958-8170, transistor, MIL-PRF-19500/207 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-19500_207D W_AMENDMENT 3 package.pdf",
    "scan": "MIL-PRF-19500_207D W_AMENDMENT 3 legacy scan.pdf",
    "clean": "MIL-PRF-19500_207D W_AMENDMENT 3 clean copy.pdf",
    "record": "MIL-PRF-19500_207D W_AMENDMENT 3 validation record.pdf",
    "sheet": "MIL-PRF-19500_207D W_AMENDMENT 3 3D model.pdf",
    "parts": "MIL-PRF-19500_207D W_AMENDMENT 3 parts list.pdf",
    "inspection": "MIL-PRF-19500_207D W_AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 4",
   "pictures": {
    "iso": "Models/views/JAN2N1482-freecad.png",
    "pair": "Models/views/JAN2N1482-pair.png",
    "record": "Models/views/JAN2N1482-record.png",
    "front": "Models/views/JAN2N1482-front.png",
    "top": "Models/views/JAN2N1482-top.png",
    "right": "Models/views/JAN2N1482-right.png",
    "cut": "Models/views/JAN2N1482-cut.png"
   },
   "shown_part": "JAN2N1482",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the figure 1 metal can for all 8 PINs of MIL-PRF-19500/207: JAN2N1479 to JAN2N1482 in the modified TO-205AA can with standard leads and the same four types with suffix S in the modified TO-205AD can with short leads, each a can on a flange with its tab and three round leads.",
   "not_modeled": [
    "L1 and L2 as steps on the lead: LU and LD carry the same limits (.016 to .019), so each lead is one round wire and the solid has no step at L2; L2 has no check of its own, and L1 is checked as the start of the round lead below the seating plane.",
    "The rounded top edge of the can and the taper from the flange up to the can that the figure draws without a dimension, and any other body contour inside zone Q, which note 9 leaves optional.",
    "The inside of the package (die, wire bonds, glass seals) and the collector-to-case connection: the solid is the outside shape as one body.",
    "Lead finish (QML-19500), marking, other lead lengths that 3.4.3 allows by contract, and the ratings and electrical tests, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, 0 scanned. SHA-256 5aeb0751c1d3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,786 of 2,820 items agreed. All 29 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "33 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 8 tables (481 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "8 solids in STEP AP242. 264 of 264 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision D Amendment 3 (all previous amendments incorporated), 19 January 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-19500/240U w/AMENDMENT 3",
   "slug": "mil-prf-19500-240u-w-amendment-3",
   "title": "Semiconductor device, diode, silicon, rectifier, axial leaded and surface mount packages, types 1N645-1, 1N647-1, and 1N649-1, quality levels JAN, jantx, and jantxv",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-19500_240U w_AMENDMENT 3 Semiconductor device, diode",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 15,
   "solids": 27,
   "dimensions": 324,
   "dimensions_met": 324,
   "kind": "Performance specification sheet",
   "dated": "14 April 2026",
   "status": "Active, 14 April 2026",
   "newest": "Revision U Amendment 3 (all previous amendments incorporated), 14 April 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5961-00-985-4900, semiconductor device, diode, MIL-PRF-19500/240 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-19500_240U w_AMENDMENT 3 package.pdf",
    "scan": "MIL-PRF-19500_240U w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MIL-PRF-19500_240U w_AMENDMENT 3 clean copy.pdf",
    "record": "MIL-PRF-19500_240U w_AMENDMENT 3 validation record.pdf",
    "sheet": "MIL-PRF-19500_240U w_AMENDMENT 3 3D model.pdf",
    "parts": "MIL-PRF-19500_240U w_AMENDMENT 3 parts list.pdf",
    "inspection": "MIL-PRF-19500_240U w_AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/JANTX1N647-freecad.png",
    "pair": "Models/views/JANTX1N647-pair.png",
    "record": "Models/views/JANTX1N647-record.png",
    "front": "Models/views/JANTX1N647-front.png",
    "top": "Models/views/JANTX1N647-top.png",
    "right": "Models/views/JANTX1N647-right.png",
    "cut": "Models/views/JANTX1N647-cut.png"
   },
   "shown_part": "JANTX1N647",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the two outlines of MIL-PRF-19500/240, one for each of the 27 PINs of 6.5: the DO-204AH axial package of figure 1 for the 18 PINs without a package suffix (1N645, 1N647 and 1N649, with and without -1, at JAN, JANTX and JANTXV), a round body .0725 in diameter and .160 long with a .020 lead 1.250 long from each end, and the DO-213AA surface mount package of figure 2 for the 9 UR-1 PINs, two round end caps .065 in diameter and .019 thick over a .138 length with a .063 glass body between them.",
   "not_modeled": [
    "The inside of both packages (die, metallurgically bonded double plugs of 3.4.2, glass envelope): each solid is the outside shape as one body.",
    "The rounded body and the end slugs that figure 1 draws smaller than the body, which carry no dimension apart from BL including them (note 3): the body is a plain cylinder BD by BL with square ends.",
    "The JANS PINs of 6.6.2, which are prohibited, and the superseded device types of 6.7: only the PINs listed in 6.5 are built.",
    "Lead finish (QPDSIS-19500) and solder dip (figure 2 dimensions are pre-solder dip), marking, and the electrical, thermal and test requirements, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, 0 scanned. SHA-256 6b172e0f3606.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,050 of 3,139 items agreed. All 21 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "40 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 16 tables (585 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "27 solids in STEP AP242. 324 of 324 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision U Amendment 3 (all previous amendments incorporated), 14 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Note 3 of figure 2 calls BD the glass body, but the end view draws BD across the outer circle, which the side view shows to be the end caps, so the solid takes BD (.063 to .067) as the end cap diameter with the glass body smaller; if BD controls the glass body instead, the sheet gives no end cap diameter."
   ]
  },
  {
   "id": "MIL-PRF-19500/356M w/AMENDMENT 2",
   "slug": "mil-prf-19500-356m-w-amendment-2",
   "title": "Semiconductor device, diode, silicon, voltage regulator, types 1N4954 through 1N4996, 1N5968, 1N5969, and 1N6632 through 1N6637, encapsulated (axial leaded and surface mount package) and unencapsulated, 5, 2, and 1 percent voltage tolerance, quality levels JAN, jantx, jantxv, jans, janhc and jankc",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-19500_356M w_AMENDMENT 2 Semiconductor device, diode",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 29,
   "solids": 6,
   "dimensions": 58,
   "dimensions_met": 58,
   "kind": "Performance specification sheet",
   "dated": "23 August 2023",
   "status": "Active, 23 August 2023",
   "newest": "Revision M Amendment 2 (all previous amendments incorporated), 23 August 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5961-00-493-5482, semiconductor device, diode, MIL-PRF-19500/356 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-19500_356M w_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-19500_356M w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-19500_356M w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-19500_356M w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-19500_356M w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-19500_356M w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-19500_356M w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 4",
   "pictures": {
    "iso": "Models/views/MIL-PRF-19500_356_US-freecad.png",
    "pair": "Models/views/MIL-PRF-19500_356_US-pair.png",
    "record": "Models/views/MIL-PRF-19500_356_US-record.png",
    "front": "Models/views/MIL-PRF-19500_356_US-front.png",
    "top": "Models/views/MIL-PRF-19500_356_US-top.png",
    "right": "Models/views/MIL-PRF-19500_356_US-right.png",
    "cut": "Models/views/MIL-PRF-19500_356_US-cut.png"
   },
   "shown_part": "MIL-PRF-19500/356 US",
   "application": "FreeCAD 1.1.4",
   "modeled": "Six envelope solids, one for each outline the sheet defines, each standing for every PIN in that outline: the axial leaded package of figure 1 (a .1175 diameter body .215 long with a .040 lead 1.150 long from each end), the US package of figure 2 (two .1425 square end caps .0235 thick over a .2125 length with a round body between them), and die versions A, C, D and E of figures 3 to 5 as plates A wide and C thick with the B metallization area marked on the topside.",
   "not_modeled": [
    "The LU zone (.050 max) next to each end of the axial body, where note 4 leaves the lead diameter uncontrolled: the solid holds LD through the zone, so LU has no check.",
    "The end slugs and rounded body corners that figure 1 draws inside the BD by BL cylinder, and any heat slugs, which note 3 leaves optional within that cylinder: the axial body is the plain cylinder.",
    "The neck and the concave fillets that figure 2 draws between each end cap and the body, and the rounded body ends: none is dimensioned, and the body runs straight from cap to cap.",
    "The etched mesa of die versions A, C and D (the concave side walls that figures 3 and 4 draw from the topside down to the full die outline), whose height is not dimensioned: each die is the A by C plate, with the topside area B marked on its top face.",
    "The thickness of the metallization layers (silver, aluminum, gold and Ti/Ni/Ag in the notes to figures 3 to 5) and the rounded corners of the die E anode pad, which are not dimensioned.",
    "Lead finish (QPDSIS-19500), pre-solder-dip coatings (note 2 of figures 1 and 2), marking, the cathode color band or dots (3.5.3), the internal double-plug construction of 3.4.2, and the electrical ratings and tests, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "29 pages, 4 scanned. SHA-256 d590b5e7206b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "6,155 of 6,642 items agreed. All 65 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "779 checks on size series and limits. 12 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "27 pages of searchable text, 23 tables (1,656 cells), 10 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "6 solids in STEP AP242. 58 of 58 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision M Amendment 2 (all previous amendments incorporated), 23 August 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Die version A: B max (.065 sq) exceeds A min (.059 sq) in the figure 3 table, so the limits allow a topside metallization wider than the die; the sheet states no minimum border between B and A."
   ]
  },
  {
   "id": "MIL-PRF-19500/395L w/AMENDMENT 5",
   "slug": "mil-prf-19500-395l-w-amendment-5",
   "title": "Transistor, npn, silicon, switching, encapsulated (through-hole and surface mount) types 2N3735 and 2N3737 quality levels JAN, jantx, jantxv, jans, janhc, jankc",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-19500_395L w_AMENDMENT 5 Transistor, npn",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 25,
   "solids": 116,
   "dimensions": 2150,
   "dimensions_met": 2150,
   "kind": "Performance specification sheet",
   "dated": "13 May 2026",
   "status": "Active, 13 May 2026",
   "newest": "Revision L Amendment 5 (all previous amendments incorporated), 13 May 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5961-00-247-5921, transistor, MIL-PRF-19500/395 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-19500_395L w_AMENDMENT 5 package.pdf",
    "scan": "MIL-PRF-19500_395L w_AMENDMENT 5 legacy scan.pdf",
    "clean": "MIL-PRF-19500_395L w_AMENDMENT 5 clean copy.pdf",
    "record": "MIL-PRF-19500_395L w_AMENDMENT 5 validation record.pdf",
    "sheet": "MIL-PRF-19500_395L w_AMENDMENT 5 3D model.pdf",
    "parts": "MIL-PRF-19500_395L w_AMENDMENT 5 parts list.pdf",
    "inspection": "MIL-PRF-19500_395L w_AMENDMENT 5 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 5",
   "pictures": {
    "iso": "Models/views/JANSU2N3737-freecad.png",
    "pair": "Models/views/JANSU2N3737-pair.png",
    "record": "Models/views/JANSU2N3737-record.png",
    "front": "Models/views/JANSU2N3737-front.png",
    "top": "Models/views/JANSU2N3737-top.png",
    "right": "Models/views/JANSU2N3737-right.png",
    "cut": "Models/views/JANSU2N3737-cut.png"
   },
   "shown_part": "JANSU2N3737",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the five outlines of MIL-PRF-19500/395, one for each of its 116 PINs with every RHA designator written out: the TO-39 can of 2N3735 and the TO-5 can of 2N3735L (figure 1), the TO-46 can of 2N3737 (figure 2), each with its flange, tab and three leads; the 2N3737UB ceramic surface mount package with its lid, pad castellations and corner notch (figure 3); and the square A version die of figure 4 for the JANHC and JANKC PINs of both types.",
   "not_modeled": [
    "The pads of the UB package as metallized areas (hatched, note 3): pad width LW, pad length LL1 and the pad 4 metallization radius r2 lie on the ceramic faces with no thickness, so the solid carries no pad and those three dimensions have no check; the castellations at the pads carry r, LS1, LS2 and LL2.",
    "The bonding pads B (.0045 by .0045) and E (.004 by .005) of the die, whose places on the chip figure 4 does not dimension, and the die's top metal, back metal and glassivation layers (notes 3 to 5): the die is a plain block.",
    "The rounded top edge of each can and the rounded lid corners the figures draw without a radius, and the optional outline in zone Q (note 4).",
    "The inside of each package (die, wire bonds, glass seals, ceramic cavity): each solid is the outside shape as one body.",
    "Lead finish (QPDSIS-19500), marking, the case and lid connections, and the ratings, electrical tests and radiation levels, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "25 pages, 0 scanned. SHA-256 b4c29974c80c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,940 of 5,199 items agreed. All 53 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "76 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "20 pages of searchable text, 19 tables (1,115 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "116 solids in STEP AP242. 2,150 of 2,150 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision L Amendment 5 (all previous amendments incorporated), 13 May 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 3 gives the lid only maxima, CL .128 and CW .108, equal to BL and BW maximum, so the lid size is not fixed: built at those maxima the lid overhangs a body built at the middle of BL and BW (.1215 by .0965) and covers the corner notch, while the figure draws the lid inside the body outline with the orientation key visible.",
    "Model. The footnotes to 6.5.1 and 6.5.2 say the # stands for one of eight RHA designators but list eleven (E, K, U, M, D, P, L, R, F, G, H), as 1.5.2 does; the solids follow the eleven letters."
   ]
  },
  {
   "id": "MIL-PRF-19500/424D",
   "slug": "mil-prf-19500-424d",
   "title": "Semiconductor device, diode, silicon, fast recovery, power rectifier, 1N5186, 1N5187, 1N5188, and 1N5190, JAN, jantx, and jantxv",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-19500_424D Semiconductor device, diode",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 12,
   "dimensions": 108,
   "dimensions_met": 108,
   "kind": "Performance specification sheet",
   "dated": "12 February 2021",
   "status": "Inactive, 12 February 2021",
   "newest": "Revision D, 12 February 2021",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5961-00-333-9077, semiconductor device, diode, MIL-PRF-19500/424 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-19500_424D package.pdf",
    "scan": "MIL-PRF-19500_424D legacy scan.pdf",
    "clean": "MIL-PRF-19500_424D clean copy.pdf",
    "record": "MIL-PRF-19500_424D validation record.pdf",
    "sheet": "MIL-PRF-19500_424D 3D model.pdf",
    "parts": "MIL-PRF-19500_424D parts list.pdf",
    "inspection": "MIL-PRF-19500_424D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/JAN1N5186-freecad.png",
    "pair": "Models/views/JAN1N5186-pair.png",
    "record": "Models/views/JAN1N5186-record.png",
    "front": "Models/views/JAN1N5186-front.png",
    "top": "Models/views/JAN1N5186-top.png",
    "right": "Models/views/JAN1N5186-right.png",
    "cut": "Models/views/JAN1N5186-cut.png"
   },
   "shown_part": "JAN1N5186",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the axial outline of figure 1 (similar to DO-41), one for each of the 12 PINs of 6.6 (1N5186, 1N5187, 1N5188 and 1N5190 at JAN, JANTX and JANTXV), all the same shape: a round body .135 in diameter and .225 long with square ends, and a .040 diameter lead 1.25 long on the axis from each end of the body.",
   "not_modeled": [
    "The inside of the device (the die, the metallurgically bonded double plug construction of 3.4.3 and the slugs drawn dashed in the body ends): each solid is the outside shape as one body.",
    "The note 4 zone, .050 out onto each lead from the body, where the lead diameter is not controlled: the solid holds LD through the zone, so the zone has no shape of its own.",
    "The cathode color band of 3.5.1, the marking, the lead finish of 3.4.2, and the electrical, thermal and test requirements, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, 0 scanned. SHA-256 b56f58a8679b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,593 of 2,619 items agreed. All 26 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "15 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 8 tables (397 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "12 solids in STEP AP242. 108 of 108 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision D, 12 February 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-19500/469F w/AMENDMENT 2",
   "slug": "mil-prf-19500-469f-w-amendment-2",
   "title": "Rectifier, semiconductor device, unitized, silicon, high-power, single phase, full wave bridge rectifier, types M19500/469-01, -02, -03, -04, and -05, quality levels jantx and jantxv",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-19500_469F w_AMENDMENT 2 Rectifier, semiconductor device",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 15,
   "solids": 10,
   "dimensions": 470,
   "dimensions_met": 470,
   "kind": "Performance specification sheet",
   "dated": "21 October 2026",
   "status": "Active, 21 October 2026",
   "newest": "Revision F Amendment 2 (all previous amendments incorporated), 21 October 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5961-01-025-9328, semiconductor devices, unitized, M19500/469-01 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-19500_469F w_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-19500_469F w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-19500_469F w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-19500_469F w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-19500_469F w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-19500_469F w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-19500_469F w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/JANTXM19500_469-01-freecad.png",
    "pair": "Models/views/JANTXM19500_469-01-pair.png",
    "record": "Models/views/JANTXM19500_469-01-record.png",
    "front": "Models/views/JANTXM19500_469-01-front.png",
    "top": "Models/views/JANTXM19500_469-01-top.png",
    "right": "Models/views/JANTXM19500_469-01-right.png",
    "cut": "Models/views/JANTXM19500_469-01-cut.png"
   },
   "shown_part": "JANTXM19500/469-01",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the bridge rectifier outline of figure 1, one for each of the 10 PINs of 6.5 (M19500/469-01 to -05 at JANTX and JANTXV), all the same shape: a square case .7425 wide and .370 high with a .144 mounting hole through its center, and four terminals on a .400 square pattern, each a .096 post with a .071 neck .093 long under a .025 head, .570 overall from the base.",
   "not_modeled": [
    "The inside of the assembly (the discrete diodes of 3.4.1.1 and the encapsulation of 3.4.1.2) and the split between the metal case, the encapsulation and the metal area around the mounting hole, whose shape figure 1 leaves optional: each solid is the outside shape as one body.",
    "The terminal 1 mechanical index of note 2 (a line or flattened corner, the manufacturer's choice), the polarity and identification marking of note 2 and 3.5, and the case temperature point of note 3.",
    "The terminal finish of 3.4.2 and the electrical, thermal and test requirements, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, 2 scanned. SHA-256 de6446ae07f4.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,371 of 3,385 items agreed. All 15 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "55 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 9 tables (387 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "10 solids in STEP AP242. 470 of 470 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 2 (all previous amendments incorporated), 21 October 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 gives H1 and H2 as maximums only (.570 and .370) and gives the D2 post between the top surface and the neck no length, so the height of the terminals above the body has no minimum; the model uses .570 - .370 = .200, a .082 post under the neck and head."
   ]
  },
  {
   "id": "MIL-PRF-19500/507G w/AMENDMENT 2",
   "slug": "mil-prf-19500-507g-w-amendment-2",
   "title": "Semiconductor device, diode, silicon, bipolar transient voltage suppressor, types 1N6036 through 1N6072 JAN, jantx, and jantxv",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-19500_507G w_AMENDMENT 2 Semiconductor device, diode",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 18,
   "solids": 111,
   "dimensions": 1665,
   "dimensions_met": 1665,
   "kind": "Performance specification sheet",
   "dated": "8 May 2024",
   "status": "Active, 8 May 2024",
   "newest": "Revision G Amendment 2 (all previous amendments incorporated), 8 May 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5961-01-226-8502, semiconductor device, diode, MIL-PRF-19500/507 (Los Angeles, Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-19500_507G w_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-19500_507G w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-19500_507G w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-19500_507G w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-19500_507G w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-19500_507G w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-19500_507G w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/JANTX1N6054A-freecad.png",
    "pair": "Models/views/JANTX1N6054A-pair.png",
    "record": "Models/views/JANTX1N6054A-record.png",
    "front": "Models/views/JANTX1N6054A-front.png",
    "top": "Models/views/JANTX1N6054A-top.png",
    "right": "Models/views/JANTX1N6054A-right.png",
    "cut": "Models/views/JANTX1N6054A-cut.png"
   },
   "shown_part": "JANTX1N6054A",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the DO-13 package of figure 1, one for each of the 111 PINs of 6.6 (37 types, 1N6036A to 1N6072A, at JAN, JANTX and JANTXV), all the same shape: a round body .225 in diameter and .325 long with square ends, a .0725 diameter tubulation out to the .570 BLT length, and a .030 diameter lead 1.3125 long on the axis from the body (lead 1) and from the end of the tubulation (lead 2).",
   "not_modeled": [
    "The LU zone (.188 max) next to the body on lead 1 and next to the tubulation on lead 2, where note 4 lets the lead diameter vary for finishes and irregularities: the solid holds LD through the zone, so LU has no check.",
    "The pinched bulb and collar the figure draws on the tubulation, and the pinch or seal deformation note 5 allows along it: the tubulation is a plain cylinder at CD.",
    "The inside of the device (die, metallurgically bonded construction of 3.4.1, seal and case walls): the solid is the outside shape as one body.",
    "Lead finish (QML-19500), marking, the electrical connection of lead 1 to the case (note 7), and the electrical ratings and tests of tables I to IV, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, 1 scanned. SHA-256 6144ff47f208.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,518 of 3,596 items agreed. All 32 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "455 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 9 tables (871 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "111 solids in STEP AP242. 1,665 of 1,665 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Amendment 2 (all previous amendments incorporated), 8 May 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-1/1648D w/AMENDMENT 1",
   "slug": "mil-prf-1-1648d-w-amendment-1",
   "title": "Electron tube, power type 8660",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-1_1648D w_AMENDMENT 1 Electron tube, power type 8660",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 1,
   "dimensions": 18,
   "dimensions_met": 18,
   "kind": "Performance specification sheet",
   "dated": "27 March 2024",
   "status": "Active, 27 March 2024",
   "newest": "Revision D Amendment 1 (amendment incorporated), 27 March 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5960-00-230-8366, electron tube, MIL-E-1/1648 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-1_1648D w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-1_1648D w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-1_1648D w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-1_1648D w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-1_1648D w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-1_1648D w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-1_1648D w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 2, page 6",
   "pictures": {
    "iso": "Models/views/MIL-PRF-1_1648_Type_8660-freecad.png",
    "pair": "Models/views/MIL-PRF-1_1648_Type_8660-pair.png",
    "record": "Models/views/MIL-PRF-1_1648_Type_8660-record.png",
    "front": "Models/views/MIL-PRF-1_1648_Type_8660-front.png",
    "top": "Models/views/MIL-PRF-1_1648_Type_8660-top.png",
    "right": "Models/views/MIL-PRF-1_1648_Type_8660-right.png",
    "cut": "Models/views/MIL-PRF-1_1648_Type_8660-cut.png"
   },
   "shown_part": "MIL-PRF-1/1648 Type 8660",
   "application": "FreeCAD 1.1.4",
   "modeled": "One envelope solid of the type 8660 ceramic-metal tetrode, built at the middle of every limit in figure 2: the contact stack with its four lugged contact tabs, the do-not-contact flange, the anode cooler, the dome and the top terminal.",
   "not_modeled": [
    "The cooling fins of the anode cooler, the corner rounds on the top terminal, collar and dome, and the shape of the flange and the alternate sealing ring of Detail A beyond a plain disc.",
    "P, U and V on the bottom view (the central contact and the narrow strip on the vent-hole line), because figure 2 does not show what feature each one measures or its depth.",
    "The vent holes, whose locations the figure calls not critical and whose size it does not give, and the two marked circles on the R and S lines of the bottom view.",
    "The internal electrode structure, the ceramic and metal parts of the stack as separate bodies, materials, marking and the electrical and cooling requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 84a09c5f8fc6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "738 of 752 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "41 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 4 tables (401 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "1 solid in STEP AP242. 18 of 18 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Amendment 1 (amendment incorporated), 27 March 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 2 does not show which feature P, U and V on the bottom view measure, so the central contact and the narrow strip on the vent-hole line cannot be modeled from the document.",
    "Model. The bottom view gives the width N only for the lug on the vent-hole line; the width of the lugs on the R and S lines is not given and is taken equal to N."
   ]
  },
  {
   "id": "MIL-PRF-1/973E",
   "slug": "mil-prf-1-973e",
   "title": "Electron tube, radiation counter types 5980 and 5980A",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-1_973E Electron tube, radiation counter types 5980 and",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 10,
   "solids": 2,
   "dimensions": 15,
   "dimensions_met": 15,
   "kind": "Performance specification sheet",
   "dated": "7 May 2004",
   "status": "Inactive, 13 January 2025",
   "newest": "Revision E Notice 3 - Validation, 13 January 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5960-01-349-5525, electron tube, MIL-PRF-1/973 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-1_973E package.pdf",
    "scan": "MIL-PRF-1_973E legacy scan.pdf",
    "clean": "MIL-PRF-1_973E clean copy.pdf",
    "record": "MIL-PRF-1_973E validation record.pdf",
    "sheet": "MIL-PRF-1_973E 3D model.pdf",
    "parts": "MIL-PRF-1_973E parts list.pdf",
    "inspection": "MIL-PRF-1_973E inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 6",
   "pictures": {
    "iso": "Models/views/5980A-freecad.png",
    "pair": "Models/views/5980A-pair.png",
    "record": "Models/views/5980A-record.png",
    "front": "Models/views/5980A-front.png",
    "top": "Models/views/5980A-top.png",
    "right": "Models/views/5980A-right.png",
    "cut": "Models/views/5980A-cut.png"
   },
   "shown_part": "5980A",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of revolution of the type 5980 counter tube assembly (figure 1) and the type 5980A counter tube (figure 1A), each with its window as a closed cavity under a thin wall.",
   "not_modeled": [
    "Type 5980: the conductive epoxy joint and the powdered glass section of the end section, which lie inside a flush cylinder, so H, K, L and J, which run from them, are not checked on the solid.",
    "Type 5980: C, the narrow band the cutaway shows just past the right end of the window, which figure 1 draws without a diameter.",
    "Type 5980: the reduced neck between the end section and the body and the tapered, rounded tip of the lead, which figure 1 draws without dimensions.",
    "Type 5980A: the hatched band ahead of the collar and the smaller diameter figure 1A draws in it, the band line on the body and the chamfer on the end cap, none of which is dimensioned.",
    "The internal electrodes and gas fill, the semi-gloss black enamel of figure 1 note 1, the serial number marking, the electrical, life and environmental tests of table I, the figure 2 photosensitivity test layout and the figure 3 response curves."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "10 pages, 1 scanned. SHA-256 49f84c46b49e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "772 of 777 items agreed. 6 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "63 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 5 tables (275 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 15 of 15 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision E Notice 3 - Validation, 13 January 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table I, row 8 (Response count rate and current, part 2), column Symbol: read as Ib, could be lb.",
    "Model. Figure 1 gives no diameters for the type 5980 assembly; the solid borrows D, C and G from figure 1A, and an engineer must confirm or replace them before the 5980 solid is used for fit.",
    "Model. Figure 1's limits do not close at their middles: from the epoxy joint to the body's right end K + L + B is .156 + .301 + .830 = 1.287 while J + G is .821 + .447 = 1.268, the two chains overlap only from 1.272 to 1.278, and the solid, which places the body by H + K + L, puts the window center .8405 from the joint, outside J (.816 to .826)."
   ]
  },
  {
   "id": "MIL-PRF-25369D w/AMENDMENT 1",
   "slug": "mil-prf-25369d-w-amendment-1",
   "title": "Cartridge, inflator, flotation gear, (carbon dioxide), (for the inflation of pneumatic life preservers)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-25369D w_AMENDMENT 1 Cartridge, inflator",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 3,
   "dimensions": 31,
   "dimensions_met": 31,
   "kind": "Performance specification",
   "dated": "30 March 2007",
   "status": "Active, 13 August 2020",
   "newest": "Revision D Notice 1 - Validation, 13 August 2020",
   "superseding": "",
   "preparing_activity": "Air Force Life Cycle Management Center, Warner Robins",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "4220-00-543-6693, cartridge, compressed gas, MIL-PRF-25369 TY 2 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-25369D w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-25369D w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-25369D w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-25369D w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-25369D w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-25369D w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-25369D w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 4",
   "pictures": {
    "iso": "Models/views/MIL-PRF-25369_Type_II-freecad.png",
    "pair": "Models/views/MIL-PRF-25369_Type_II-pair.png",
    "record": "Models/views/MIL-PRF-25369_Type_II-record.png",
    "front": "Models/views/MIL-PRF-25369_Type_II-front.png",
    "top": "Models/views/MIL-PRF-25369_Type_II-top.png",
    "right": "Models/views/MIL-PRF-25369_Type_II-right.png",
    "cut": "Models/views/MIL-PRF-25369_Type_II-cut.png"
   },
   "shown_part": "MIL-PRF-25369 Type II",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid envelopes of the three carbon dioxide cylinders: type I to figure 1 (1.125 body, 4.970 MAX long, 3/4-16UNF-2A neck) and types II and III to figure 2 (1 and 1-1/8 inch bodies, 5.5 MAX long, 1/2-20UNF-2A neck with the depressed puncture area).",
   "not_modeled": [
    "The gas cavity and wall, and the piercing thickness .010 +.002 -.000 under the type II and III puncture area, which need an inside shape the figures do not dimension.",
    "Thread form: the type I pitch diameter .7029 to .7094 and minor diameter .6733 MAX, and the pitch, minor diameter and class 2A limits of the 1/2-20UNF-2A thread.",
    "The 60\u00b0 and 30\u00b0 angles printed at the type II and III puncture depression, which figure 2 does not tie to a surface the solids carry.",
    "The break edge at the type I tip, the smooth finishes for the O-ring gasket and the puncturable area, the corrosion finish and the identification marking band.",
    "The CO2 charge of table I, the filling density, the minimum gross weight and the performance requirements, which do not set the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, 1 scanned. SHA-256 14a732383999.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,637 of 3,659 items agreed. All 22 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "5 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 2 tables (38 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "3 solids in STEP AP242. 31 of 31 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 13 August 2020.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 2 does not show whether .430 \u00b1.003 DIA. is the diameter of the top face or of the lower edge of the 45\u00b0 tip chamfer; the solids take the lower edge, because a 45\u00b0 chamfer .0625 deep from a .430 top face would end at .555, larger than the .500 nominal size of the 1/2-20UNF-2A thread."
   ]
  },
  {
   "id": "MIL-PRF-25732E",
   "slug": "mil-prf-25732e",
   "title": "Packing, preformed, petroleum hydraulic fluid resistant, limited service at 250 \u00b0F (121 \u00b0C)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-25732E Packing, preformed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 16,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "8 March 2024",
   "status": "Inactive, 8 March 2024",
   "newest": "Revision E (all previous amendments incorporated), 8 March 2024",
   "superseding": "",
   "preparing_activity": "Air Force Research Laboratory (AFRL)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5331-01-232-1476, o-ring, MIL-P-25732C (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-25732E package.pdf",
    "scan": "MIL-PRF-25732E legacy scan.pdf",
    "clean": "MIL-PRF-25732E clean copy.pdf",
    "record": "MIL-PRF-25732E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "16 pages, 3 scanned. SHA-256 339ac5853fe4.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,973 of 3,408 items agreed. All 25 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 9 tables (194 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-25732E is a performance specification for nitrile rubber O-rings resistant to petroleum hydraulic fluid for limited service at 250 \u00b0F that sets material properties, fluid resistance, compression set, dynamic cycling, qualification, batch and lot tests in Tables I to III, and sends the dimensions and tolerances of standard sizes to SAE AS28775 under paragraph 3.3; its only drawings, Figures 1 to 3, show the dynamic cycling rig, test cell and cylinder assembly, with no size table or dimensioned part drawing.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision E (all previous amendments incorporated), 8 March 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-27G w/AMENDMENT 1",
   "slug": "mil-prf-27g-w-amendment-1",
   "title": "Transformers and inductors (audio, power, and high-power pulse), general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-27G w_AMENDMENT 1 Transformers and inductors, audio",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 53,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "12 June 2020",
   "status": "Active, 18 March 2025",
   "newest": "Revision G Notice 1 - Validation, 18 March 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5950-00-617-4251, transformer, power, MIL-PRF-27 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-27G w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-27G w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-27G w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-27G w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "53 pages, 10 scanned. SHA-256 2e25a51b5daa.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "18,183 of 18,362 items agreed. 106 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "72 checks on size series and limits. 7 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "52 pages of searchable text, 14 tables (651 cells), 21 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-27G w/AMENDMENT 1 is a general performance specification for audio, power and high-power pulse transformers and inductors that sets grades, classes, materials, terminal color codes, qualification and conformance inspection, and electrical, environmental and mechanical test methods, and sends each item's case, terminal and mounting dimensions to the applicable specification sheet (3.1); its only dimensioned drawings are test fixtures, the Figure 9 Helmholtz coil structure and the Figure 10 temperature-rise mounting layout, and Table XV gives brass spacer sizes by mounting screw size for that test with no drawing.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Notice 1 - Validation, 18 March 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 4, callout at top right of the switch: read as E1, could be EI."
   ]
  },
  {
   "id": "MIL-PRF-28861/6E w/AMENDMENT 1",
   "slug": "mil-prf-28861-6e-w-amendment-1",
   "title": "Filters and capacitors, radio frequency/electromagnetic interference, supperession, nonhermetically sealed, style FS60",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-28861_6E w_AMENDMENT 1 Filters and capacitors, radio frequency-electrom",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 9,
   "dimensions": 62,
   "dimensions_met": 62,
   "kind": "Performance specification sheet",
   "dated": "20 August 2025",
   "status": "Active, 20 August 2025",
   "newest": "Revision E Amendment 1 (amendment incorporated), 20 August 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5910-01-509-5410, capacitor, fixed, ceramic dielectr, M28861/06/001TB (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-28861_6E w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-28861_6E w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-28861_6E w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-28861_6E w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-28861_6E w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-28861_6E w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-28861_6E w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28861_06-005-freecad.png",
    "pair": "Models/views/M28861_06-005-pair.png",
    "record": "Models/views/M28861_06-005-record.png",
    "front": "Models/views/M28861_06-005-front.png",
    "top": "Models/views/M28861_06-005-top.png",
    "right": "Models/views/M28861_06-005-right.png",
    "cut": "Models/views/M28861_06-005-cut.png"
   },
   "shown_part": "M28861/06-005",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the seven style FS60 filters, M28861/06-001 to -007 (hex case of thickness A, .112-40 threaded body and the two leads), and of the hex nut and internal-tooth lockwasher supplied with each filter.",
   "not_modeled": [
    "The reduced end drawn beyond the .220 threaded length, where note 6 points, and the potting drawn at both ends of the case, which carry no dimensions; note 8 keeps potting within .030 of the body.",
    "Thread form, the imperfect threads of notes 5 and 6, and the recommended mounting torque of note 7.",
    "The chamfers drawn on the case hex and on both faces of the hex nut, which carry no dimensions.",
    "Case finish (T, S or G) and product assurance level, the two letters that complete the PIN, and the abbreviated marking of figure 2 on the hex flats.",
    "Internal construction, the weight limit of 1 gram, and the circuits and electrical ratings of Table I, which are recorded as parameters only."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 cafce8f48cec.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "800 of 812 items agreed. All 8 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "120 checks on size series and limits. 10 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 4 tables (153 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 62 of 62 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 1 (amendment incorporated), 20 August 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet draws a reduced end on the threaded body beyond the .220 dimension and potting at both ends of the case but gives neither a diameter nor a length for them.",
    "Model. The sheet gives no inside diameter, tooth count or tooth width for the internal-tooth lockwasher, only its outside diameter, stock thickness and overall thickness."
   ]
  },
  {
   "id": "MIL-PRF-28876/11F",
   "slug": "mil-prf-28876-11f",
   "title": "Connectors, fiber optic, circular, receptacle style, multiple removable termini, screw threads, jamnut mounting, without backshell, environment resisting",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-28876_11F Connectors, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 4,
   "dimensions": 100,
   "dimensions_met": 100,
   "kind": "Performance specification sheet",
   "dated": "1 March 2021",
   "status": "Active, 4 March 2026",
   "newest": "Revision F Notice 1 - Validation, 4 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6060-01-528-4103, connector, receptacle, fiber optic, M28876/11F1S1 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-28876_11F package.pdf",
    "scan": "MIL-PRF-28876_11F legacy scan.pdf",
    "clean": "MIL-PRF-28876_11F clean copy.pdf",
    "record": "MIL-PRF-28876_11F validation record.pdf",
    "sheet": "MIL-PRF-28876_11F 3D model.pdf",
    "parts": "MIL-PRF-28876_11F parts list.pdf",
    "inspection": "MIL-PRF-28876_11F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28876_11C_-freecad.png",
    "pair": "Models/views/M28876_11C_-pair.png",
    "record": "Models/views/M28876_11C_-record.png",
    "front": "Models/views/M28876_11C_-front.png",
    "top": "Models/views/M28876_11C_-top.png",
    "right": "Models/views/M28876_11C_-right.png",
    "cut": "Models/views/M28876_11C_-cut.png"
   },
   "shown_part": "M28876/11C*****",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-PRF-28876/11 jamnut receptacle without backshell, fully assembled, one per shell size 11, 13, 15, 23 (A, B, C, F), 4 solids: the shell at Z max over the 1.990 maximum length, the JJ mounting thread with its NN flat, the .125 thick VV hex jamnut set for a .188 panel, and the square MM flange with corners on KK, its front face 1.023 from the front face.",
   "not_modeled": [
    "The coupling thread form, the bore, the master polarizing keyway and keyway positions 1 to 6 of figures A-2, A-3, A-5 and A-6 of MIL-PRF-28876; the front face is closed.",
    "The insert arrangements of appendix B of MIL-PRF-28876 (figures B-1 to B-6), the style P and S termini of MIL-PRF-29504/14 and /15, and the 0.094 maximum fiber optic cable path to each terminus; the interior is solid.",
    "The insert retention nut and the neck Figure 1 draws behind the flange, including N DIA (note 6) and the nut internal configuration of figure A-8 of MIL-PRF-28876 (note 5).",
    "The thread form and pitch of the JJ thread, the yellow band, the hex nut safety wire holes (note 7), the sealing gasket or O-ring between flange and panel, and the jamnut bore; the jamnut and shell are one body.",
    "The panel itself: PP dia and LL flat (the panel cutout) and the .188 maximum panel thickness are limits on the panel, recorded as parameters and checked as clearances on the solid.",
    "The identification marking (note 4), protective caps, the weight limits, and the finish of Table III.",
    "The 288 PINs of Table I that differ only in insert arrangement number, terminus/insert style, key position, backshell designator or class designator (the * positions of each part number) share the solid of their shell size."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 e849008a643b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "611 of 626 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "25 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 6 tables (152 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 100 of 100 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 1 - Validation, 4 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. This sheet gives no N DIA (note 6 refers it to appendix A of MIL-PRF-28876), no flange thickness and no lengths for the front shell, the neck or the insert retention nut, so the solids carry Z max behind the flange and a 0.125 flange as stand-ins; Figure 1 draws the nut larger than Z, so an engineer must take N and the flange thickness from MIL-PRF-28876 before the solids are used for more than a panel-mounting space claim.",
    "Model. Table II backshell designator N supplies the receptacle without the insert retention nut, and the sheet gives no overall length for that configuration, so N receptacles share the 1.990 max fully assembled envelope."
   ]
  },
  {
   "id": "MIL-PRF-28876/9F w/AMENDMENT 2",
   "slug": "mil-prf-28876-9f-w-amendment-2",
   "title": "Connectors, fiber optic, circular, plug style, multiple removable termini, screw threads, with 90-DEGREE backshell, environment resisting",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-28876_9F w_AMENDMENT 2 Connectors, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 11,
   "dimensions": 176,
   "dimensions_met": 176,
   "kind": "Performance specification sheet",
   "dated": "5 March 2026",
   "status": "Active, 5 March 2026",
   "newest": "Revision F Amendment 2 (all previous amendments incorporated), 5 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 5,
   "by_class": {
    "Los Angeles": 1,
    "Ohio": 4
   },
   "stock_examples": [
    "6060-01-493-3489, connector, plug, fiber optic, M28876/9C11P2 (Los Angeles)",
    "6060-01-519-3953, connector, plug, fiber optic, M28876/9F11P3 (Ohio)",
    "6060-01-519-3957, connector, plug, fiber optic, M28876/9F11P1 (Ohio)",
    "6060-01-519-7786, connector, plug, fiber optic, M28876/9F11P2 (Ohio)"
   ],
   "files": {
    "package": "MIL-PRF-28876_9F w_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-28876_9F w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-28876_9F w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-28876_9F w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-28876_9F w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-28876_9F w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-28876_9F w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28876_9C_1_-freecad.png",
    "pair": "Models/views/M28876_9C_1_-pair.png",
    "record": "Models/views/M28876_9C_1_-record.png",
    "front": "Models/views/M28876_9C_1_-front.png",
    "top": "Models/views/M28876_9C_1_-top.png",
    "right": "Models/views/M28876_9C_1_-right.png",
    "cut": "Models/views/M28876_9C_1_-cut.png"
   },
   "shown_part": "M28876/9C*1***",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-PRF-28876/9 plug with 90-degree backshell, fully assembled, one per shell size and backshell dash number Table I permits (11 solids, M28876/9A*1*** to M28876/9F*3***): a cylinder at the O maximum diameter joined to a mitred 90-degree elbow at the M maximum diameter that reaches the AF and AG maximums, with a cable entry in the rear face of the outlet at the Table II maximum cable outer diameter.",
   "not_modeled": [
    "The plug shell, knurled coupling nut, backshell coupling nut, elbow housing, backshell screws and outlet outlines Figure 1 draws; the sheet dimensions only the O, M, AF and AG maximums.",
    "N DIA, which note 5 refers to appendix A of MIL-PRF-28876 and which this sheet does not give.",
    "The mating interface, shell polarization (keyway positions 1 to 6) and master polarizing key of figures A-1, A-3, A-5, A-6 and A-7 of MIL-PRF-28876, and the clocking of the backshell to the key that the front view draws; the front face is closed.",
    "The insert arrangements of appendix B of MIL-PRF-28876 (figures B-1 to B-6), the style P and S termini of MIL-PRF-29504/14 and /15, and the cable path to them; the interior above the cable entry is solid.",
    "The optional boot, which Figure 1 draws below the AG max line without dimensions.",
    "Safety wire holes (note 6), the identification marking (note 4), protective caps, the weight limits, and the finish of Table III.",
    "The 408 PINs of Table I that differ only in insert arrangement number, terminus/insert style, key position or class designator (the * positions of each part number) share the solid of their shell size and backshell dash number."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 34f64e34cc41.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "505 of 532 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 5 tables (84 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "11 solids in STEP AP242. 176 of 176 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 2 (all previous amendments incorporated), 5 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 marks N DIA '(SEE Note 6)', but note 6 covers safety wire holes and note 5 refers N DIA to appendix A of MIL-PRF-28876, which gives the value this sheet leaves out; the sheet also gives no length for the plug shell, coupling nut, backshell entry or outlet, so an engineer must take the backshell geometry from MIL-PRF-28876 or the backshell drawing before the solids are used for more than a space claim.",
    "Model. Figure 1 draws the optional boot below the bottom of the backshell, outside the AG max height, with no length or diameter, so the space the boot needs is not defined."
   ]
  },
  {
   "id": "MIL-PRF-29504/14B w/AMENDMENT 1",
   "slug": "mil-prf-29504-14b-w-amendment-1",
   "title": "Termini, fiber optic, connector, removable, environment resisting, pin terminus, front release, ceramic ferrule (for use with MIL-PRF-28876 connectors)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-29504_14B w_AMENDMENT 1 Termini, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 12,
   "dimensions": 168,
   "dimensions_met": 168,
   "kind": "Performance specification sheet",
   "dated": "30 April 2024",
   "status": "Active, 30 April 2024",
   "newest": "Revision B Amendment 1 (amendment incorporated), 30 April 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6060-01-493-3524, contact, fiber optic, M29504/14-4141C (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-29504_14B w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-29504_14B w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-29504_14B w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-29504_14B w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-29504_14B w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-29504_14B w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-29504_14B w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M29504_14-4140-freecad.png",
    "pair": "Models/views/M29504_14-4140-pair.png",
    "record": "Models/views/M29504_14-4140-record.png",
    "front": "Models/views/M29504_14-4140-front.png",
    "top": "Models/views/M29504_14-4140-top.png",
    "right": "Models/views/M29504_14-4140-right.png",
    "cut": "Models/views/M29504_14-4140-cut.png"
   },
   "shown_part": "M29504/14-4140",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the 12 pin termini of Table I (6 long, M29504/14-4130 to -4141, and 6 short, -4150 to -4161), each a stepped body of revolution with the .07875 ceramic ferrule and its Table I bore A, the .102 spring section, the .116 body behind the retaining clip shoulder, the .077 rear end and the .0545 internal buffer guide bore of Figure 2.",
   "not_modeled": [
    "The spring, the retaining clip, the environmental seal (O-ring) with the ring and groove beside it, and the manufacturer's symbol or label, which Figures 1 and 2 draw without dimensions; the solid steps from the spring section to the body at the retaining clip shoulder.",
    "The bevel drawn at the front edge of the ferrule and the radiused end face that note 10 permits; the end face is flat with a sharp edge.",
    "The crimp sleeve that the C suffix of the PIN adds; the sheet does not dimension it (it accepts cable of .0945 max outer diameter and is crimped with a hex die .0945 across flats and .285 max long), so M29504/14-XXXXC is the same terminus as M29504/14-XXXX.",
    "The TICC color bands at the rear of the long terminus (notes 6, 8 and 11), marking, and the crimp grooves that note 12 permits on the crimp diameter.",
    "The Figure 3 insert equivalent fixture (.125, .104 for .101 max, .121 and .300 min), a gauge for measuring the .384/.372 dimension, not part of the terminus.",
    "The 0.035 ounce maximum weight, materials (zirconia-like ferrule, corrosion resistant metal parts), adhesives, tools of Table II and the optical, environmental and qualification requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, 0 scanned. SHA-256 0624787a618a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,454 of 2,481 items agreed. All 21 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "42 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 10 tables (441 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "12 solids in STEP AP242. 168 of 168 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Amendment 1 (amendment incorporated), 30 April 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives only a maximum overall length for the long (.900) and short (.700) terminus and no length for the .118/.114 body or the .080/.074 rear end diameter, so where the body steps down, and which section the short terminus shortens, must come from the manufacturer's drawing.",
    "Model. Figure 2 gives the C diameter of the internal buffer guide but not its depth, and the sheet gives no diameter or length for the bore between the buffer guide and the ferrule bore A."
   ]
  },
  {
   "id": "MIL-PRF-29504/2B",
   "slug": "mil-prf-29504-2b",
   "title": "Termini, fiber optic, connector, removable, environment resisting, socket terminus, (for MIL-C-28876 and MIL-C-83526 connectors)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-29504_2B Termini, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 19,
   "dimensions": 228,
   "dimensions_met": 228,
   "kind": "Performance specification sheet",
   "dated": "12 November 2002",
   "status": "Canceled, 30 April 2024",
   "newest": "Revision B Notice 2 - Cancellation, 30 April 2024",
   "superseding": "MIL-PRF-29504/15",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6060-01-493-3511, contact, fiber optic, M29504/02-4023 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-29504_2B package.pdf",
    "scan": "MIL-PRF-29504_2B legacy scan.pdf",
    "clean": "MIL-PRF-29504_2B clean copy.pdf",
    "record": "MIL-PRF-29504_2B validation record.pdf",
    "sheet": "MIL-PRF-29504_2B 3D model.pdf",
    "parts": "MIL-PRF-29504_2B parts list.pdf",
    "inspection": "MIL-PRF-29504_2B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M29504_2-4028-freecad.png",
    "pair": "Models/views/M29504_2-4028-pair.png",
    "record": "Models/views/M29504_2-4028-record.png",
    "front": "Models/views/M29504_2-4028-front.png",
    "top": "Models/views/M29504_2-4028-top.png",
    "right": "Models/views/M29504_2-4028-right.png",
    "cut": "Models/views/M29504_2-4028-cut.png"
   },
   "shown_part": "M29504/2-4028",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the MIL-PRF-29504/2 socket terminus, one per TICC number of Table 1 (19 solids, M29504/2-4019 to -4037): the split alignment sleeve, guide bushing, body and retaining clip flare as one body of revolution with the Figure 1 lengths and diameters, the A guide bushing bore, and the B and C internal guides of Figure 2.",
   "not_modeled": [
    "The environmental seal (O-ring), the body of the retaining clip and its slot, the ring on the body ahead of the clip and the ring ahead of the seal, which Figure 1 draws without dimensions.",
    "The split and the waist of the alignment sleeve, its chamfers, the chamfer from the body to the rear end diameter and the rear chamfer; the sleeve is a plain tube fused to the guide bushing, so it is not separable.",
    "TICC bands (note 6) and the manufacturer's symbol or trademark.",
    "Concentricity (note 3) and the 2.5 micrometre circular runout, which the solids meet exactly by construction, the 1 gram weight limit, adhesives, and the insertion and separation forces.",
    "The optional crimp sleeve, which the sheet does not dimension; a PIN with the crimp sleeve suffix shares the solid of its TICC number.",
    "The insert-equivalent gauge fixture of Figure 3, which is a measuring fixture and not a part number, and the tools of Table II."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 0 scanned. SHA-256 fb98a18b5b35.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "852 of 861 items agreed. All 4 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "146 checks on size series and limits. 2 breaks checked against the scan: all are as printed. A later review settled 1 printed value from the document's own conversions.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 7 tables (220 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "19 solids in STEP AP242. 228 of 228 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 2 - Cancellation, 30 April 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no length for the split alignment sleeve, the body sections or the A, B and C bores, and no diameter for the body ahead of the seal, the retaining clip or the O-ring, so those come from Figure 1 in proportion and must be confirmed before the solids are used for more than a space claim.",
    "Model. Table III heads its PIN column M29504/01- while the PIN paragraph gives M29504/2-XXXX; the solids use M29504/2-XXXX, and the qualifying activity should confirm the PIN."
   ]
  },
  {
   "id": "MIL-PRF-32143C",
   "slug": "mil-prf-32143c",
   "title": "Batteries, storage: automotive, valve regulated lead acid (vrla)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-32143C Batteries, storage-automotive",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 38,
   "solids": 2,
   "dimensions": 118,
   "dimensions_met": 118,
   "kind": "Performance specification",
   "dated": "9 February 2016",
   "status": "Active, 19 August 2025",
   "newest": "Revision C Notice 2 - Validation, 19 August 2025",
   "superseding": "",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "2040-01-518-0058, connection, ventilation, MIL-PRF-32143 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-32143C package.pdf",
    "scan": "MIL-PRF-32143C legacy scan.pdf",
    "clean": "MIL-PRF-32143C clean copy.pdf",
    "record": "MIL-PRF-32143C validation record.pdf",
    "sheet": "MIL-PRF-32143C 3D model.pdf",
    "parts": "MIL-PRF-32143C parts list.pdf",
    "inspection": "MIL-PRF-32143C inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 4, page 33",
   "pictures": {
    "iso": "Models/views/12423975-freecad.png",
    "pair": "Models/views/12423975-pair.png",
    "record": "Models/views/12423975-record.png",
    "front": "Models/views/12423975-front.png",
    "top": "Models/views/12423975-top.png",
    "right": "Models/views/12423975-right.png",
    "cut": "Models/views/12423975-cut.png"
   },
   "shown_part": "12423975",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 6TAGM and 6TGEL battery (PINs 12423975 and 12423975-001), one shared outline: case and cover with R 6.0 plan corners and R 4.0 bottom edges, hold-down ledges with grooves, tapered terminal posts on pads, the corrugated band by the positive post, and both rope handles raised taut.",
   "not_modeled": [
    "Internal construction: cells, plates, separators, electrolyte, vents and the cover-to-container seal.",
    "The stepped base corners of figure 5 (38.0 \u00b11.5 along each edge, R 4.0 and R 7.5 in the detail); the base is flat.",
    "The radius or chamfer permitted at the post tops and the optional radius at the hold-down groove floor.",
    "Labels and marking: warning, in-service date, identification and battery identification labels (label positions 108, 32 and 51 of figure 3), polarity marks, and the maintenance advisory tag of figure 8.",
    "Rope handle attachment below the ledge (optional per figure 6) and the handles' folded position.",
    "Mass (34 kg nominal, 40.75 kg max), electrical and environmental requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "38 pages, 4 scanned. SHA-256 3a7cd03844e4.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "10,095 of 10,165 items agreed. All 12 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "10 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "29 pages of searchable text, 9 tables (436 cells), 8 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 118 of 118 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 2 - Validation, 19 August 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 3 gives the case 256 +0/-6 by 269.0 +0/-6 while figures 4 and 5 give 254.0 +0/-6 by 267.0 +0/-6; the document does not say whether the 2 mm difference is a cover overhang, draft, or the same surface.",
    "Model. The depth of the hold-down ledges below their top is not dimensioned; the model uses 21 mm scaled from figures 4 to 6.",
    "Model. Figure 5 gives the stepped base corners in plan (38.0 \u00b11.5, R 4.0, R 7.5) but no step height, so they cannot be modeled."
   ]
  },
  {
   "id": "MIL-PRF-39009/1D w/Amendment 3",
   "slug": "mil-prf-39009-1d-w-amendment-3",
   "title": "Resistor, fixed, wirewound, (power type, chassis mounted), nonestablished reliability, and established reliability, styles RER60, RER65, RER70, and RER75",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-39009_1D w_Amendment 3 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 4,
   "dimensions": 88,
   "dimensions_met": 88,
   "kind": "Performance specification sheet",
   "dated": "5 August 2022",
   "status": "Active, 5 August 2022",
   "newest": "Revision D Amendment 3 (all previous amendments incorporated), 5 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 2,
    "Ohio": 1
   },
   "stock_examples": [
    "5905-01-508-9022, resistor, fixed, wire wound, induct, MIL-PRF-39009/1 (Los Angeles)",
    "5905-01-537-9647, resistor, fixed, wire wound, induct, MIL-PRF-39009/1 (Los Angeles, Ohio)"
   ],
   "files": {
    "package": "MIL-PRF-39009_1D w_Amendment 3 package.pdf",
    "scan": "MIL-PRF-39009_1D w_Amendment 3 legacy scan.pdf",
    "clean": "MIL-PRF-39009_1D w_Amendment 3 clean copy.pdf",
    "record": "MIL-PRF-39009_1D w_Amendment 3 validation record.pdf",
    "sheet": "MIL-PRF-39009_1D w_Amendment 3 3D model.pdf",
    "parts": "MIL-PRF-39009_1D w_Amendment 3 parts list.pdf",
    "inspection": "MIL-PRF-39009_1D w_Amendment 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/RER70-freecad.png",
    "pair": "Models/views/RER70-pair.png",
    "record": "Models/views/RER70-record.png",
    "front": "Models/views/RER70-front.png",
    "top": "Models/views/RER70-top.png",
    "right": "Models/views/RER70-right.png",
    "cut": "Models/views/RER70-cut.png"
   },
   "shown_part": "RER70",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid per resistor style (RER60, RER65, RER70, RER75), each standing for every PIN of that style: the housing as a rectangular block with two drilled mounting feet at opposite corners of the base and an axial round lead at each end flattened into a drilled lug, all sized from the Figure 1 tables.",
   "not_modeled": [
    "The inductively wound element, core, potting and materials inside the housing; the body is solid.",
    "The optional configurations of Figure 1: rounded corners on the mounting feet and a rounded or finned housing top (fins permitted).",
    "The circle drawn on the body end around the lead in the end view, which carries no dimension.",
    "The resistance, tolerance and product level codes of the PIN, which do not change the outline.",
    "Weight (table I), power ratings (tables II and III), resistance range (table IV), dielectric withstanding voltage (table V), terminal pull (table VI), the test chassis (table VII) and the derating curves (figure 2)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 0 scanned. SHA-256 41928a61eddb.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,188 of 1,270 items agreed. All 69 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "4 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 10 tables (128 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 88 of 88 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Amendment 3 (all previous amendments incorporated), 5 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The P column prints its tolerance as \u00b10.005 (0.79), but 0.79 mm is \u00b10.031 in, not \u00b10.005 in; the solids are checked against \u00b10.005 in because note 2 makes the inch values govern.",
    "Model. The side view prints OPTIONAL CONFIGURATION under the left lug with no leader, so the figure does not say whether the flattened lug with hole P is the standard terminal or an option to a plain wire lead; the solids carry the lug on both leads."
   ]
  },
  {
   "id": "MIL-PRF-39010/5E W/AMENDMENT 2",
   "slug": "mil-prf-39010-5e-w-amendment-2",
   "title": "Coils, fixed, radio frequency, molded, subminiature (powdered iron core), established reliability and nonestablished reliability",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-39010_5E W_AMENDMENT 2 Coils, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 24,
   "dimensions": 192,
   "dimensions_met": 192,
   "kind": "Performance specification sheet",
   "dated": "14 December 2022",
   "status": "Active, 14 December 2022",
   "newest": "Revision E Amendment 2 (all previous amendments incorporated), 14 December 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5950-01-183-6435, coil, radio frequency, M39010/05A100KR (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-39010_5E W_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-39010_5E W_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-39010_5E W_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-39010_5E W_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-39010_5E W_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-39010_5E W_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-39010_5E W_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39010_05-A9R1-freecad.png",
    "pair": "Models/views/M39010_05-A9R1-pair.png",
    "record": "Models/views/M39010_05-A9R1-record.png",
    "front": "Models/views/M39010_05-A9R1-front.png",
    "top": "Models/views/M39010_05-A9R1-top.png",
    "right": "Models/views/M39010_05-A9R1-right.png",
    "cut": "Models/views/M39010_05-A9R1-cut.png"
   },
   "shown_part": "M39010/05-A9R1",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 24 molded subminiature RF coils M39010/05-A3R0 to -A270, which share the one outline of Figure 1: a cylindrical body .188 in diameter (A) and .438 long (B) with a .025 diameter (D) axial lead running 1.438 (C) out from the center of each end.",
   "not_modeled": [
    "The coil inside the molded body (powdered iron core, winding and the joint between the leads and the winding), which the sheet does not draw; the body is solid.",
    "The two letters that complete each dash number (inductance tolerance and product level), which are defined in MIL-PRF-39010 and do not change the outline; one solid is built for each Table I dash number.",
    "The 0.03 ounce maximum weight, which needs a material density the sheet does not give.",
    "The electrical and test requirements, which do not change the outline: the Table I inductance, tolerance, Q, test frequency, self-resonant frequency, dc resistance and rated current of each dash number, the Table II limits, the -55\u00b0C to +105\u00b0C operating range, 15\u00b0C temperature rise, 5 pound terminal pull, dielectric withstanding voltage and barometric pressure tests."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 2b9b344eb36a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "548 of 564 items agreed. All 19 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "154 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (244 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "24 solids in STEP AP242. 192 of 192 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 2 (all previous amendments incorporated), 14 December 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, column 'DC resistance (25\u00b0C) maximum (ohms)': 1.05 then 0.05. Page 3 prints .05 for A120** under 1.05 for A110**; the column otherwise gives each pair of dash numbers one value (0.140, 0.155, ... 1.20, 1.95), so the printed .05 looks like a dropped leading 1 (1.05) and is a point for an engineer."
   ]
  },
  {
   "id": "MIL-PRF-39014/2M",
   "slug": "mil-prf-39014-2m",
   "title": "Capacitor, fixed, ceramic dielectric (general purpose), established reliability and nonestablished reliability, style CKR06, NATO type designation NCC62",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-39014_2M Capacitor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 4,
   "dimensions": 78,
   "dimensions_met": 78,
   "kind": "Performance specification sheet",
   "dated": "27 September 2024",
   "status": "Active, 27 September 2024",
   "newest": "Revision M, 27 September 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 2
   },
   "stock_examples": [
    "5925-01-497-1094, circuit breaker, MIL-PRF-39014/2 (Los Angeles)",
    "5925-01-497-1097, circuit breaker, MIL-PRF-39014/2 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-39014_2M package.pdf",
    "scan": "MIL-PRF-39014_2M legacy scan.pdf",
    "clean": "MIL-PRF-39014_2M clean copy.pdf",
    "record": "MIL-PRF-39014_2M validation record.pdf",
    "sheet": "MIL-PRF-39014_2M 3D model.pdf",
    "parts": "MIL-PRF-39014_2M parts list.pdf",
    "inspection": "MIL-PRF-39014_2M inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39014_02_without_standoffs_note_4-freecad.png",
    "pair": "Models/views/M39014_02_without_standoffs_note_4-pair.png",
    "record": "Models/views/M39014_02_without_standoffs_note_4-record.png",
    "front": "Models/views/M39014_02_without_standoffs_note_4-front.png",
    "top": "Models/views/M39014_02_without_standoffs_note_4-top.png",
    "right": "Models/views/M39014_02_without_standoffs_note_4-right.png",
    "cut": "Models/views/M39014_02_without_standoffs_note_4-cut.png"
   },
   "shown_part": "M39014/02 without standoffs note 4",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style CKR06 capacitor in its two Figure 1 configurations, each at the 1.250 lead length and the .625 tape and reel length of note 4: a molded body .290 wide and .090 thick with two .026 leads .200 apart, the body .290 high without standoffs, or .290 from its top to the tips of two triangular standoffs .026 deep at \u00b1.045 with the optional V standoffs.",
   "not_modeled": [
    "Each of the 420 part numbers as its own solid (42 ratings of table I at four failure rate levels under M39014/02- and at level M under M39014/02C, each with and without the V standoffs): every one has one of the two outlines, so one solid stands for each configuration at each lead length.",
    "The inside of the capacitor (ceramic element, electrodes and the joint between the leads and the element): each solid is the outside shape as one body.",
    "The insulation coating that runs down the leads (not more than .018, note 8) and the shoulder that a .078 printed circuit hole must clear for flush mounting (note 10), neither of which Figure 1 draws with a shape; each lead leaves a flat body face.",
    "The bare lead and solderability limits of .020 from the body egress, marking, and the electrical and test requirements (capacitance, tolerance, voltage rating and failure rate level of table I, dissipation factor, insulation resistance, voltage-temperature limits, life), none of which change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 8a04e1de05b9.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,059 of 2,135 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "813 checks on size series and limits. 29 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 3 tables (1,176 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 78 of 78 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision M, 27 September 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table II, column 'Substitutable for dash number in MIL-C-39014/2B and /2C / P': 2659 then 270. Page 6 prints 02659 in row 1390 (crops/page 6-02659.png and the source text layer agree); the series runs 0267, 0268, 02659, 0270 and the /2D P column prints 0269 in the same row, so the printed value looks like a typo for 0269, a point for an engineer."
   ]
  },
  {
   "id": "MIL-PRF-39015E w/ Amendment 5",
   "slug": "mil-prf-39015e-w-amendment-5",
   "title": "Resistor, variable, wirewound, (lead screw actuated), nonestablished reliability, and established reliability, general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-39015E w_ Amendment 5 Resistor, variable",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 36,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "2 September 2022",
   "status": "Active, 2 September 2022",
   "newest": "Revision E Amendment 5 (all previous amendments incorporated), 2 September 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 2
   },
   "stock_examples": [
    "5905-00-572-4528, resistor, variable, wire wound, non, M39015-2-007XP (Los Angeles)",
    "5905-01-054-3389, resistor, variable, wire wound, non, M39015-3-007XR (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-39015E w_ Amendment 5 package.pdf",
    "scan": "MIL-PRF-39015E w_ Amendment 5 legacy scan.pdf",
    "clean": "MIL-PRF-39015E w_ Amendment 5 clean copy.pdf",
    "record": "MIL-PRF-39015E w_ Amendment 5 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "36 pages, 0 scanned. SHA-256 5ac3103b6ca1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "13,775 of 14,230 items agreed. All 50 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "135 checks on size series and limits. 13 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "38 pages of searchable text, 16 tables (812 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-39015 is the general performance specification for lead screw actuated wirewound variable resistors (styles RTR12, RTR22, RTR24): it defines electrical ratings, terminals, product levels and qualification and conformance tests, and leaves all physical dimensions to the slash sheets MIL-PRF-39015/1, /2 and /3.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 5 (all previous amendments incorporated), 2 September 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-39015/2J w/ Amendment 2",
   "slug": "mil-prf-39015-2j-w-amendment-2",
   "title": "Resistor, variable, wirewound (lead-screw actuated), nonestablished reliability and established reliability style RTR22",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-39015_2J w_ Amendment 2 Resistor, variable",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 44,
   "dimensions": 869,
   "dimensions_met": 869,
   "kind": "Performance specification sheet",
   "dated": "2 September 2022",
   "status": "Active, 2 September 2022",
   "newest": "Revision J Amendment 2 (all previous amendments incorporated), 2 September 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5905-00-572-4528, resistor, variable, wire wound, non, M39015/02-007XP (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-39015_2J w_ Amendment 2 package.pdf",
    "scan": "MIL-PRF-39015_2J w_ Amendment 2 legacy scan.pdf",
    "clean": "MIL-PRF-39015_2J w_ Amendment 2 clean copy.pdf",
    "record": "MIL-PRF-39015_2J w_ Amendment 2 validation record.pdf",
    "sheet": "MIL-PRF-39015_2J w_ Amendment 2 3D model.pdf",
    "parts": "MIL-PRF-39015_2J w_ Amendment 2 parts list.pdf",
    "inspection": "MIL-PRF-39015_2J w_ Amendment 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 4",
   "pictures": {
    "iso": "Models/views/M39015_2-001W-freecad.png",
    "pair": "Models/views/M39015_2-001W-pair.png",
    "record": "Models/views/M39015_2-001W-record.png",
    "front": "Models/views/M39015_2-001W-front.png",
    "top": "Models/views/M39015_2-001W-top.png",
    "right": "Models/views/M39015_2-001W-right.png",
    "cut": "Models/views/M39015_2-001W-cut.png"
   },
   "shown_part": "M39015/2-001W",
   "application": "FreeCAD 1.1.4",
   "modeled": "Forty-four envelope solids of the style RTR22 lead-screw resistor, one for each dash number 001 to 011 with each terminal type L (inactive for new design), P, W and X (the product level letter, which does not change the shape, is left off the part number): the rectangular body, the slotted actuator head standing proud of its face, the two mounting holes of types L and W, and the three pins of types P, W and X.",
   "not_modeled": [
    "The three type L leads of note 6 (stranded AWG 28 to 30 wire, 6 inches minimum, PTFE insulated, stripped 0.250 \u00b10.062, color coded) and their .063 MAX meniscus: the leads are flexible and their insulated diameter is not given.",
    "The chamfered type L corner where the leads leave, which carries no dimension, and the slotted form the mounting holes may take: the corner is square and the holes are round.",
    "The optional .073 mounting holes of types P and X (note 9), whose position figure 1 does not give.",
    "The inside of the resistor (wirewound element, wiper, lead screw) and the part of the actuator below the body surface: note 8 makes the figure an envelope, and the solid is the outside shape as one body.",
    "Part number marking, lead color coding, the 3/4 watt rating, 20 to 42 turn electrical travel, 5 ounce-inch torque, 0.00529 pound weight and the Table I electrical values, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 2 scanned. SHA-256 2033fda89a3c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,348 of 1,353 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "82 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 2 tables (115 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "44 solids in STEP AP242. 869 of 869 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J Amendment 2 (all previous amendments incorporated), 2 September 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 does not dimension the shaded area that locates the .078 actuator on the type P and W end face; it is drawn over roughly the lower half of that face, and the solids centre the head in that half.",
    "Model. Figure 1 gives the .073 diameter of the optional type P and X mounting holes but not their position (the .520 +.006 -.007 spacing is printed only for types L and W, and note 7 refers missing type X dimensions to type P, which has none), so the P and X solids carry no holes."
   ]
  },
  {
   "id": "MIL-PRF-39015/3M w/ Amendment 2",
   "slug": "mil-prf-39015-3m-w-amendment-2",
   "title": "Resistor, variable, wirewound (lead-screw actuated), nonestablished reliability and established reliability style RTR24",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-39015_3M w_ Amendment 2 Resistor, variable",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 40,
   "dimensions": 760,
   "dimensions_met": 760,
   "kind": "Performance specification sheet",
   "dated": "2 September 2022",
   "status": "Active, 2 September 2022",
   "newest": "Revision M Amendment 2 (all previous amendments incorporated), 2 September 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5905-01-054-3389, resistor, variable, wire wound, non, M39015/03-007XP (Los Angeles)",
    "5905-00-489-6762, resistor, variable, wire wound, non, M39015/3-009PR (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-39015_3M w_ Amendment 2 package.pdf",
    "scan": "MIL-PRF-39015_3M w_ Amendment 2 legacy scan.pdf",
    "clean": "MIL-PRF-39015_3M w_ Amendment 2 clean copy.pdf",
    "record": "MIL-PRF-39015_3M w_ Amendment 2 validation record.pdf",
    "sheet": "MIL-PRF-39015_3M w_ Amendment 2 3D model.pdf",
    "parts": "MIL-PRF-39015_3M w_ Amendment 2 parts list.pdf",
    "inspection": "MIL-PRF-39015_3M w_ Amendment 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 4",
   "pictures": {
    "iso": "Models/views/M39015_3-001W-freecad.png",
    "pair": "Models/views/M39015_3-001W-pair.png",
    "record": "Models/views/M39015_3-001W-record.png",
    "front": "Models/views/M39015_3-001W-front.png",
    "top": "Models/views/M39015_3-001W-top.png",
    "right": "Models/views/M39015_3-001W-right.png",
    "cut": "Models/views/M39015_3-001W-cut.png"
   },
   "shown_part": "M39015/3-001W",
   "application": "FreeCAD 1.1.4",
   "modeled": "Forty envelope solids of the style RTR24 lead-screw resistor, one for each dash number 001 to 010 with each terminal type L, P, W and X (the product level letter, which does not change the shape, is left off the part number): the rectangular body, the slotted actuating screw head standing proud in its shaded area, the two mounting holes of type L, and the three pins of types P, W and X.",
   "not_modeled": [
    "The three type L leads of note 7 (stranded AWG 28 to 30 wire, 6 inches minimum, PTFE insulated, stripped 0.250 \u00b10.062, color coded): they are flexible and their insulated diameter is not given.",
    "The chamfered corner of the type L face where the leads leave, which carries no dimension, and the slotted form the mounting holes may take: the corner is square and the holes are round.",
    "The inside of the resistor (wirewound element, wiper, lead screw) and the part of the screw below the body surface: note 6 makes the figure an envelope, and the solid is the outside shape as one body.",
    "Part number marking, lead color coding, the 3/4 watt rating, 15 to 30 turn electrical travel, 5 ounce-inch torque, 0.00286 pound weight and the Table I electrical values, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 1 scanned. SHA-256 5835a1441501.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,140 of 1,188 items agreed. All 17 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "36 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (82 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "40 solids in STEP AP242. 760 of 760 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision M Amendment 2 (all previous amendments incorporated), 2 September 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The inch/mm table on page 5 prints 0.197 = 4.75 mm, but 4.75 mm is 0.187 inch (the figure's .187 \u00b1.020 pin position) and 0.197 inch is 5.00 mm; no .197 dimension appears in figure 1, and the solids use .187.",
    "Model. Read as drawn, on the body diagonal and centred, the .072 holes .419 apart leave .003 of wall to two edges of the .375 type L body at nominal sizes, and the .082 maximum hole at the .429 maximum spacing breaks through those edges by .005; the figure gives no edge distance or angle for the holes."
   ]
  },
  {
   "id": "MIL-PRF-39019/2H w/AMENDMENT 1",
   "slug": "mil-prf-39019-2h-w-amendment-1",
   "title": "Circuit breakers, magnetic, low-power, sealed, trip-free one-pole, auxiliary contacts",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-39019_2H w_AMENDMENT 1 Circuit breakers, magnetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 220,
   "dimensions": 4180,
   "dimensions_met": 4180,
   "kind": "Performance specification sheet",
   "dated": "5 March 2025",
   "status": "Active, 5 March 2025",
   "newest": "Revision H Amendment 1 (amendment incorporated), 5 March 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 3,
   "by_class": {
    "Los Angeles": 3
   },
   "stock_examples": [
    "5925-01-222-6642, circuit breaker, M39019/02-337 (Los Angeles)",
    "5925-01-497-1094, circuit breaker, M39019/02-215S (Los Angeles)",
    "5925-01-497-1097, circuit breaker, M39019/02-263S (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-39019_2H w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-39019_2H w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-39019_2H w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-39019_2H w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-39019_2H w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-39019_2H w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-39019_2H w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39019_02-230S-freecad.png",
    "pair": "Models/views/M39019_02-230S-pair.png",
    "record": "Models/views/M39019_02-230S-record.png",
    "front": "Models/views/M39019_02-230S-front.png",
    "top": "Models/views/M39019_02-230S-top.png",
    "right": "Models/views/M39019_02-230S-right.png",
    "cut": "Models/views/M39019_02-230S-cut.png"
   },
   "shown_part": "M39019/02-230S",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of all 220 M39019/02 part numbers, the 110 dash numbers of Table I in configuration 1 (two solder-lug main terminals and three auxiliary pins) and configuration 2 (S suffix, an insulating block over the screw terminals): the 1.562 by .625 case, the .610 dia bushing shoulder and .375-32 UNEF-2A bushing with its keyway, and the toggle thrown to OFF with its .240 spherical tip.",
   "not_modeled": [
    "Mounting hardware: the hex nut of note 5 (.375-32 UNEF-2B, .093 \u00b1.005 thick, MS25082-20), the internal tooth lockwasher of note 6 (.507/.493 O.D., .392/.382 I.D., .025 \u00b1.005 thick), the on-off plate, the lock ring of note 10 and the panel seal O-ring.",
    "Configuration 2's main terminal screws (.138-32 x .250, MS35265-26, No. 6 lockwashers, note 12) and its auxiliary terminals, which sit inside the insulating block; the block is a solid envelope, so the .906 and .250 terminal positions are checked on configuration 1 only.",
    "The hooked solder-lug form of the configuration 1 main terminals, the style and form of the auxiliary terminals (note 7 leaves them optional) and their two 20 AWG wire capacity, thread forms, the 8\u00b0 to 14\u00b0 ON position of the toggle, marking (note 9) and the circuit diagram numbering (note 11).",
    "The panel mounting detail's panel cutout itself (.391 dia hole, and the .125 dia locating hole .062 min deep at .325 center to center), which is used only to check the breaker's fit.",
    "The Table I electrical ratings, time delay, resistance and impedance, the voltage and inrush ratings and the 50 gram reference weight, which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 1 scanned. SHA-256 52ad1b62e5ff.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,324 of 1,333 items agreed. All 4 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "593 checks on size series and limits. 16 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 3 tables (766 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "220 solids in STEP AP242. 4,180 of 4,180 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 1 (amendment incorporated), 5 March 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The side view draws the .610 DIA MAX extension lines on the sides of the case, whose width the top view gives as .625 MAX; the solids read .610 as the round bushing shoulder and build the case .625 wide, so an engineer must confirm whether .610 also limits the case width.",
    "Model. Configuration 2's height is printed 1.810 MAX on the page 2 drawing, but the inch/mm table on page 3 lists 1.780 (45.21 mm), a value no drawing prints, and gives no metric equivalent for 1.810; the solids use the drawing's 1.810.",
    "Model. The panel mounting detail prints the .391 dia bushing hole without a tolerance, so note 3's \u00b1.031 would allow a .360 hole that the .375-32 bushing cannot pass; the fit is checked against the .391 nominal."
   ]
  },
  {
   "id": "MIL-PRF-39019/6H w/AMENDMENT 1",
   "slug": "mil-prf-39019-6h-w-amendment-1",
   "title": "Circuit breakers, magnetic, low-power, sealed, trip-free three-pole, auxiliary contacts",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-39019_6H w_AMENDMENT 1 Circuit breakers, magnetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 220,
   "dimensions": 6820,
   "dimensions_met": 6820,
   "kind": "Performance specification sheet",
   "dated": "5 March 2025",
   "status": "Active, 5 March 2025",
   "newest": "Revision H Amendment 1 (amendment incorporated), 5 March 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 2
   },
   "stock_examples": [
    "5925-01-497-1175, circuit breaker, M39019/06-254S (Los Angeles)",
    "5925-01-497-1180, circuit breaker, M39019/06-257S (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-39019_6H w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-39019_6H w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-39019_6H w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-39019_6H w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-39019_6H w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-39019_6H w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-39019_6H w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39019_06-200S-freecad.png",
    "pair": "Models/views/M39019_06-200S-pair.png",
    "record": "Models/views/M39019_06-200S-record.png",
    "front": "Models/views/M39019_06-200S-front.png",
    "top": "Models/views/M39019_06-200S-top.png",
    "right": "Models/views/M39019_06-200S-right.png",
    "cut": "Models/views/M39019_06-200S-cut.png"
   },
   "shown_part": "M39019/06-200S",
   "application": "FreeCAD 1.1.4",
   "modeled": "Outline solids of the MIL-PRF-39019/6 three-pole toggle circuit breaker for all 110 table I dash numbers in both figure 1 configurations (220 solids): case, boss, keyed .375-32 bushing, tilted toggle handle, two tapped threaded inserts and six main terminals, with the configuration 2 ('S') insulating block; the shape is the same for every dash number because table I sets only electrical values.",
   "not_modeled": [
    "Mounting hardware: the .375-32 UNEF-2B hex nut (note 5), internal tooth lockwasher (note 6), on-off plate, lock ring (note 9), panel seal O-ring and .138-32 sealscrews (note 11).",
    "Configuration 2 main terminal screws (.138-32 x .250, MS35265-26) and their No. 6 lockwashers.",
    "Auxiliary contact terminals, since note 14 makes their location, style and form optional.",
    "Solder hooks on the configuration 1 terminals, the tapered shape of the handle between its base and tip, thread form, marking (note 8) and the circuit diagram.",
    "The panel mounting detail (.391 bushing hole, .140 screw holes, .125 locating hole .325 from the bushing), which defines the panel; it is used only to check that the bushing passes the panel hole.",
    "The electrical values of table I (current rating, time delay, resistance) and the table II cross reference of superseded part numbers."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 1 scanned. SHA-256 59a00de73602.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,389 of 1,417 items agreed. All 17 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "597 checks on size series and limits. 16 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 3 tables (774 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "220 solids in STEP AP242. 6,820 of 6,820 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 1 (amendment incorporated), 5 March 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Configuration 2 prints the case height as 1.937 without MAX, so note 3 would allow up to 1.968, while configuration 1 caps the same case at 1.937 MAX; the solids are built at 1.937, which meets both."
   ]
  },
  {
   "id": "MIL-PRF-49142/12D w/AMENDMENT 3",
   "slug": "mil-prf-49142-12d-w-amendment-3",
   "title": "Connectors, plug, electrical, triaxial, radio frequency, (series trt (cabled), pin contact, right angle, class 2)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-49142_12D w_AMENDMENT 3 Connectors, plug",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 23,
   "dimensions": 276,
   "dimensions_met": 276,
   "kind": "Performance specification sheet",
   "dated": "14 September 2026",
   "status": "Active, 14 September 2026",
   "newest": "Revision D Amendment 3 (all previous amendments incorporated), 14 September 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-01-493-3402, connector, plug, electrical, M49142/12-0005 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-49142_12D w_AMENDMENT 3 package.pdf",
    "scan": "MIL-PRF-49142_12D w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MIL-PRF-49142_12D w_AMENDMENT 3 clean copy.pdf",
    "record": "MIL-PRF-49142_12D w_AMENDMENT 3 validation record.pdf",
    "sheet": "MIL-PRF-49142_12D w_AMENDMENT 3 3D model.pdf",
    "parts": "MIL-PRF-49142_12D w_AMENDMENT 3 parts list.pdf",
    "inspection": "MIL-PRF-49142_12D w_AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M49142_12-X012-freecad.png",
    "pair": "Models/views/M49142_12-X012-pair.png",
    "record": "Models/views/M49142_12-X012-record.png",
    "front": "Models/views/M49142_12-X012-front.png",
    "top": "Models/views/M49142_12-X012-top.png",
    "right": "Models/views/M49142_12-X012-right.png",
    "cut": "Models/views/M49142_12-X012-cut.png"
   },
   "shown_part": "M49142/12-X012",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-PRF-49142/12 right angle triaxial plug for all 23 dash numbers in Table I (X001 to X023), which share one shape: a .650 max coupling nut .440 long on a mitered elbow, with the .770 max cable leg centered .8815 behind the mating face and the connector 2.000 long along the leg.",
   "not_modeled": [
    "The series TRT pin interface of MIL-STD-348 (note 5): coupling thread, pin and intermediate contacts, dielectrics and bores; the coupling nut is a closed envelope with no bore.",
    "The wrench flats of note 2, which the sheet sends to FED-STD-H28 without sizing, the knurl on the coupling nut, the neck and chamfer between the elbow and the nut, and the dash-dot outline around the elbow, which the figure does not dimension (note 4).",
    "The cable, ferrule and crimp termination of each dash number, and the material and plating options the X code selects in MIL-PRF-49142.",
    "The electrical, mechanical and environmental requirements (impedance, voltage, torque, test ring and contact ring diameters, retention forces, durability), which are performance values."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 8a05c1feb650.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,008 of 1,085 items agreed. All 4 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "16 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 6 tables (166 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "23 solids in STEP AP242. 276 of 276 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Amendment 3 (all previous amendments incorporated), 14 September 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet sizes only the outside envelope and sends the mating interface to MIL-STD-348 series TRT, which is not in the package, and gives no elbow diameter, neck or wrench flat size; take those from MIL-STD-348 and the manufacturer's drawing before using the solids for mating or fit checks."
   ]
  },
  {
   "id": "MIL-PRF-55310/19E w/AMENDMENT 1",
   "slug": "mil-prf-55310-19e-w-amendment-1",
   "title": "Oscillator, crystal controlled, type 1 (crystal oscillator (XO)), 1.0 MHz through 60.0 MHz, hermetic seal, square wave, ttl",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-55310_19E w_AMENDMENT 1 Oscillator, crystal controlled",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 1,
   "dimensions": 22,
   "dimensions_met": 22,
   "kind": "Performance specification sheet",
   "dated": "12 March 2020",
   "status": "Active, 31 December 2024",
   "newest": "Revision E Notice 2 - Validation, 31 December 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5955-01-491-1450, oscillator, crystal controlled, M55310/19-B12B40M00000 (Los Angeles)",
    "5955-01-485-6805, oscillator, crystal controlled, M55310/19-B22A40M00000 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-55310_19E w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-55310_19E w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-55310_19E w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-55310_19E w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-55310_19E w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-55310_19E w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-55310_19E w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M55310_19-freecad.png",
    "pair": "Models/views/M55310_19-pair.png",
    "record": "Models/views/M55310_19-record.png",
    "front": "Models/views/M55310_19-front.png",
    "top": "Models/views/M55310_19-top.png",
    "right": "Models/views/M55310_19-right.png",
    "cut": "Models/views/M55310_19-cut.png"
   },
   "shown_part": "M55310/19",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid of the figure 1 leadless chip carrier, M55310/19, standing for every PIN: a .480 square body with the index corner chamfered .020 deep, a .457 square lid on top to the .085 maximum height, and 40 pads (10 per edge on the .040 pitch, .040 long and .020 wide) marked on the mounting face.",
   "not_modeled": [
    "The castellations drawn at every pad in the top and bottom views and the quarter-round notches at the three plain corners, which carry no dimension: the sides are flat and those corners square.",
    "The longer pin 1 index pad (or dot) of the bottom view, which has no dimension: pin 1 is the same length as the other pads.",
    "The lid's own index corner chamfer, which figure 1 draws without a size, and the pad, lid and seal ring metallization thickness: each pad is a face of the mounting face with no thickness.",
    "The inside of the package (crystal, oscillator circuit, internal connection of the NC pads under note 4): the solid is the outside shape as one body.",
    "Marking on the lid, the 3 gram maximum weight, the hermetic seal, and the electrical and environmental requirements of Table I and pages 3 and 4, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 08bf2460fa41.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "817 of 828 items agreed. All 13 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "38 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (161 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "1 solid in STEP AP242. 22 of 22 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 2 - Validation, 31 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-55342J w/ Amendment 2",
   "slug": "mil-prf-55342j-w-amendment-2",
   "title": "Resistor, chip, fixed, film, nonestablished reliability, established reliability, space level, general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-55342J w_ Amendment 2 Resistor, chip",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 59,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "30 December 2024",
   "status": "Active, 30 December 2024",
   "newest": "Revision J Supplement 1A, 30 December 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5905-01-329-4925, resistor, fixed, film, M55342K07B681DR (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-55342J w_ Amendment 2 package.pdf",
    "scan": "MIL-PRF-55342J w_ Amendment 2 legacy scan.pdf",
    "clean": "MIL-PRF-55342J w_ Amendment 2 clean copy.pdf",
    "record": "MIL-PRF-55342J w_ Amendment 2 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "59 pages, 0 scanned. SHA-256 f8633711249f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "17,278 of 17,339 items agreed. 70 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "1,023 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "47 pages of searchable text, 24 tables (2,314 cells), 45 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-55342 is the general specification for fixed film chip resistors that defines characteristics, termination materials, resistance values and tolerances, product levels, part numbering and qualification, conformance and visual inspection, and sends the chip dimensions for each style to the MIL-PRF-55342 slash sheets, with its figures giving only a derating curve, a test board, test fixtures and defect sketches without part dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J Supplement 1A, 30 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table A-III, Resistance tolerance rows, columns 2 and 3: read as each tolerance paired with the list that begins with it (0.1 with 0.1, 0.25, 0.5, 1.0, 2.0, 5.0, 10.0; ... 10.0 with 10.0), could be lists paired by printed line: 0.1 with 0.25, 0.5, 1.0, 2.0, 5.0, 10.0; ... 5.0 with 10.0; 10.0 with nothing; the first list beside no tolerance."
   ]
  },
  {
   "id": "MIL-PRF-83536/32E w/AMENDMENT 1",
   "slug": "mil-prf-83536-32e-w-amendment-1",
   "title": "Relays, electromagnetic, established reliability, 3PDT, 25 amperes (resistive), permanent magnet drive, hermetically sealed, all welded, DC coil",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-83536_32E w_AMENDMENT 1 Relays, electromagnetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 10,
   "solids": 5,
   "dimensions": 121,
   "dimensions_met": 121,
   "kind": "Performance specification sheet",
   "dated": "23 January 2025",
   "status": "Active, 23 January 2025",
   "newest": "Revision E Amendment 1 (amendment incorporated), 23 January 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5945-01-511-5051, relay, electromagnetic, MIL-PRF-83536/32 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-83536_32E w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-83536_32E w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-83536_32E w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-83536_32E w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-83536_32E w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-83536_32E w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-83536_32E w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M83536_32-003-freecad.png",
    "pair": "Models/views/M83536_32-003-pair.png",
    "record": "Models/views/M83536_32-003-record.png",
    "front": "Models/views/M83536_32-003-front.png",
    "top": "Models/views/M83536_32-003-top.png",
    "right": "Models/views/M83536_32-003-right.png",
    "cut": "Models/views/M83536_32-003-cut.png"
   },
   "shown_part": "M83536/32-003",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the five dash numbers M83536/32-001 to -005 of Table III: the 1.025 square by 1.010 high relay can with its nine .093 terminals and the X1 and X2 coil terminals in the Table III style (solder pin, solder hook, or socket pin with gasket) and its mount (the RVFM or HFM slotted flanges).",
   "not_modeled": [
    "The failure rate suffix letters L, M, P and R that complete each part number; they do not change the geometry, so each dash number has one solid.",
    "The panel mounting hole layouts (the 1.062 square cutout with .062 radius corners and three .156 +.005 -.001 holes at .172, .218 and .312 for RVFM, four .156 +.005 -.001 holes on 1.406 by .625 for HFM); the flange slots are checked against 1.406, and the slot pair against .625 and .312.",
    "The bend of the solder hooks, whose radius, opening and turn direction are not dimensioned; each hook is a straight wire to its stated length below the header.",
    "The rounded terminal tips, the corner radii of the can and of the flange corners, which are drawn round but not dimensioned; all are left square.",
    "The vertical legs of the bent RVFM and HFM flanges, whose height is not dimensioned.",
    "The contrasting bead on X1, the glass seals around the terminals, marking, circuit diagram, tin and gold plating, gasket hardness and material, and the internal coil, magnet and contacts.",
    "The 0.18 pound maximum weight, which the solids cannot show without material densities."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "10 pages, 0 scanned. SHA-256 f2fc4c1b3823.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,346 of 1,368 items agreed. All 25 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "92 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 7 tables (184 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "5 solids in STEP AP242. 121 of 121 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 1 (amendment incorporated), 23 January 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 gives no width for the RVFM flange tabs and does not locate the .937 HFM flange along the can; the model makes the RVFM tabs as wide as the can and centers the HFM flange on its two slot rows.",
    "Model. The solder hook view gives no bend radius, opening or turn direction for the hooks and does not name the terminals that carry the .625 hooks; the model uses straight wires and puts the .625 hooks on the third column as drawn."
   ]
  },
  {
   "id": "MIL-PRF-85045H",
   "slug": "mil-prf-85045h",
   "title": "Cables, fiber optic, general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-85045H Cables, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 48,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "5 November 2021",
   "status": "Active, 8 January 2024",
   "newest": "Revision H Notice 1 - Validation, 8 January 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6015-01-450-6228, cable, fiber optic, MIL-C-85045 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-85045H package.pdf",
    "scan": "MIL-PRF-85045H legacy scan.pdf",
    "clean": "MIL-PRF-85045H clean copy.pdf",
    "record": "MIL-PRF-85045H validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "48 pages, 2 scanned. SHA-256 ee08be3e6005.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "19,031 of 19,068 items agreed. All 24 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "12 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "47 pages of searchable text, 18 tables (1,243 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-85045H is a general performance specification for fiber optic cables that sets configuration types, bend ratios, attenuation and transmittance limits, temperature ranges, inspection groups, test methods and a part-number scheme, and leaves the design, construction and physical dimensions of each cable to the applicable specification sheet (3.4, 3.4.6.1); its four figures are test apparatus drawings for scraping abrasion, cable-to-cable abrasion, specimen relationship and acid gas generation, with no dimensioned drawing of any part.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Notice 1 - Validation, 8 January 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-85045/17D",
   "slug": "mil-prf-85045-17d",
   "title": "Cable, fiber optic, eight fibers, enhanced performance, cable configuration type 2 (ofcc), application B (shipboard), cable class SM and MM",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-85045_17D Cable, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 2,
   "dimensions": 14,
   "dimensions_met": 14,
   "kind": "Performance specification sheet",
   "dated": "5 November 2021",
   "status": "Active, 20 April 2026",
   "newest": "Revision D Notice 1 - Validation, 20 April 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6015-01-422-6503, cable, fiber optic, M85045/17-02N (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-85045_17D package.pdf",
    "scan": "MIL-PRF-85045_17D legacy scan.pdf",
    "clean": "MIL-PRF-85045_17D clean copy.pdf",
    "record": "MIL-PRF-85045_17D validation record.pdf",
    "sheet": "MIL-PRF-85045_17D 3D model.pdf",
    "parts": "MIL-PRF-85045_17D parts list.pdf",
    "inspection": "MIL-PRF-85045_17D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85045_17-02P-freecad.png",
    "pair": "Models/views/M85045_17-02P-pair.png",
    "record": "Models/views/M85045_17-02P-record.png",
    "front": "Models/views/M85045_17-02P-front.png",
    "top": "Models/views/M85045_17-02P-top.png",
    "right": "Models/views/M85045_17-02P-right.png",
    "cut": "Models/views/M85045_17-02P-cut.png"
   },
   "shown_part": "M85045/17-02P",
   "application": "FreeCAD 1.1.4",
   "modeled": "Two identical solids, one for each PIN (M85045/17-01P multimode and M85045/17-02P single-mode): a 60 mm piece of the finished cable stepped back from the 11.125 mm outer jacket to the core, then to the eight 2 mm OFCCs around the central member, then to the eight 900 \u00b5m buffered fibers.",
   "not_modeled": [
    "The glass fibers inside the buffers, which MIL-PRF-49291/6 (class MM) and MIL-PRF-49291/7 (class SM) define; each buffer is modeled as a solid rod.",
    "The OFCC strength members and the OFCC jacket inside diameter, which Figure 1 draws but does not dimension; each OFCC is a solid rod at its outside diameter over the buffer.",
    "The separate strength members and waterblocking material of the finished cable and the construction of the central member, which Figure 2 draws as an inner rod in a ring; the core and the central member are each one solid body.",
    "The helical lay of the eight OFCCs over the central member.",
    "Requirements that are not shape: bend diameters of 8 and 16 times the OFCC and cable outside diameters, mass per unit length (<15 kg/km OFCC, <175 kg/km cable), tensile loads, jacket material and color, and the optical, mechanical, environmental and chemical tests."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 0 scanned. SHA-256 6dbfe0219870.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,542 of 1,543 items agreed. All 1 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 3 tables (320 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 14 of 14 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 20 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no central member diameter, OFCC pitch circle or cable jacket inside diameter; the solid uses 3.226 mm, 5.976 mm and 8.725 mm, which must be confirmed against a qualified cable.",
    "Model. The sheet requires the eight OFCCs to be helically laid over the central member but gives no lay length, so the solid lays them straight."
   ]
  },
  {
   "id": "MIL-PRF-85045/18D",
   "slug": "mil-prf-85045-18d",
   "title": "Cable, fiber optic, four fibers, enhanced performance, cable configuration type 2 (ofcc), application B (shipboard), cable class SM and MM",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-85045_18D Cable, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 2,
   "dimensions": 16,
   "dimensions_met": 16,
   "kind": "Performance specification sheet",
   "dated": "5 November 2021",
   "status": "Active, 20 April 2026",
   "newest": "Revision D Notice 1 - Validation, 20 April 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6015-01-450-6228, cable, fiber optic, M85045/18-02P (Los Angeles)"
   ],
   "files": {
    "package": "MIL-PRF-85045_18D package.pdf",
    "scan": "MIL-PRF-85045_18D legacy scan.pdf",
    "clean": "MIL-PRF-85045_18D clean copy.pdf",
    "record": "MIL-PRF-85045_18D validation record.pdf",
    "sheet": "MIL-PRF-85045_18D 3D model.pdf",
    "parts": "MIL-PRF-85045_18D parts list.pdf",
    "inspection": "MIL-PRF-85045_18D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85045_18-02P-freecad.png",
    "pair": "Models/views/M85045_18-02P-pair.png",
    "record": "Models/views/M85045_18-02P-record.png",
    "front": "Models/views/M85045_18-02P-front.png",
    "top": "Models/views/M85045_18-02P-top.png",
    "right": "Models/views/M85045_18-02P-right.png",
    "cut": "Models/views/M85045_18-02P-cut.png"
   },
   "shown_part": "M85045/18-02P",
   "application": "FreeCAD 1.1.4",
   "modeled": "Two identical solids, one for each PIN (M85045/18-01P multimode and M85045/18-02P single-mode): a 60 mm piece of the finished cable stepped back from the 8.125 mm outer jacket to the core, then to the four 2 mm OFCCs laid helically at a 25 cm lay around the central member, then to the four 900 \u00b5m buffered fibers.",
   "not_modeled": [
    "The glass fibers inside the buffers, which MIL-PRF-49291/6 (class MM) and MIL-PRF-49291/7 (class SM) define; each buffer is modeled as a solid rod.",
    "The OFCC strength members and the OFCC jacket inside diameter, which Figure 1 draws but does not dimension; each OFCC is a solid rod at its outside diameter over the buffer.",
    "The four rods of waterblocking or filler material and strength members in the gaps between the OFCCs, the inner ring and the construction of the central member, which Figure 2 draws but does not dimension; the core and the central member are each one solid body.",
    "Requirements that are not shape: bend diameters of 8 and 16 times the OFCC and cable outside diameters, mass per unit length (<15 kg/km OFCC, <100 kg/km cable), tensile loads, jacket material and color, and the optical, mechanical, environmental and chemical tests."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 8a4d2558c1f1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,739 of 1,741 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 5 tables (368 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 16 of 16 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 20 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no central member diameter, OFCC pitch circle or cable jacket inside diameter; the solid uses 0.828 mm, 3.477 mm and 6.125 mm, which must be confirmed against a qualified cable."
   ]
  },
  {
   "id": "MIL-PRF-8805/99K",
   "slug": "mil-prf-8805-99k",
   "title": "Switches, push, 2 circuit and dpdt, alternate and momentary action, 2 amperes, splashproof",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-PRF-8805_99K Switches, push",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 74,
   "dimensions": 2314,
   "dimensions_met": 2314,
   "kind": "Performance specification sheet",
   "dated": "16 July 2025",
   "status": "Active, 16 July 2025",
   "newest": "Revision K, 16 July 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1,
    "Ohio": 1
   },
   "stock_examples": [
    "5930-01-437-8823, switch, push, M8805/99-013 (Los Angeles, Ohio)"
   ],
   "files": {
    "package": "MIL-PRF-8805_99K package.pdf",
    "scan": "MIL-PRF-8805_99K legacy scan.pdf",
    "clean": "MIL-PRF-8805_99K clean copy.pdf",
    "record": "MIL-PRF-8805_99K validation record.pdf",
    "sheet": "MIL-PRF-8805_99K 3D model.pdf",
    "parts": "MIL-PRF-8805_99K parts list.pdf",
    "inspection": "MIL-PRF-8805_99K inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M8805_99-073-freecad.png",
    "pair": "Models/views/M8805_99-073-pair.png",
    "record": "Models/views/M8805_99-073-record.png",
    "front": "Models/views/M8805_99-073-front.png",
    "top": "Models/views/M8805_99-073-top.png",
    "right": "Models/views/M8805_99-073-right.png",
    "cut": "Models/views/M8805_99-073-cut.png"
   },
   "shown_part": "M8805/99-073",
   "application": "FreeCAD 1.1.4",
   "modeled": "73 solids, one per PIN M8805/99-001 to -095 of Table IV: the switch case, bushing, plunger and its solder lug or printed circuit terminals (four for the 2 circuit switch, six for DPDT) with the PIN's panel seal dress ring A, B or C joined on, as an outside envelope; and one solid of the keying washer.",
   "not_modeled": [
    "Switch internals, contacts and the plunger travel (.176 max); the plunger is shown in its free position.",
    "The MS25082B21 hex nuts and the NASM35333-136 lockwasher, dimensioned by their own specifications, and the places of the lower nut, lockwasher and keying washer on the bushing, which depend on panel thickness.",
    "The dress ring O-ring seal, panel gasket and inner lip, and the rounded edges and steps the page 3 views draw without dimensions.",
    "The panel mounting hole and the alternate two-hole mounting cutout on page 4, which belong to the panel.",
    "Thread form, the bushing thread chamfer, the pointed pin tips, the rounded case bottom of the printed circuit version, the center slot and base outline on the terminal end, and the keying washer bend radius (.02 R max).",
    "Terminal identification marking, button color, finishes, weight (.643 oz max) and the electrical ratings."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 ac58a521b982.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "835 of 1,059 items agreed. All 15 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "100 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 5 tables (497 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "74 solids in STEP AP242. 2,314 of 2,314 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K, 16 July 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Page 2 labels 1.07 MAX as measured to the standoff but draws its extension line, and the .20 pin length, from the case bottom face; if both are meant from the .030 standoff seating plane the case is .030 shorter and the pins .030 longer below the case.",
    "Model. Detail A gives the terminal columns (.100, .200, .400) but not the row spacing of terminals 1 to 4 or the standoff positions, and page 1 gives no solder lug positions or blade size; a board layout needs them."
   ]
  },
  {
   "id": "MIL-R-6130C",
   "slug": "mil-r-6130c",
   "title": "Rubber, cellular, chemically blown",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-R-6130C Rubber, cellular",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 18,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "18 July 1980",
   "status": "Canceled, 19 March 2001",
   "newest": "Revision C Notice 2 - Cancellation, 19 March 2001",
   "superseding": "ASTM-D6576",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 2,
   "by_class": {
    "Seawolf": 2
   },
   "stock_examples": [
    "9320-01-426-2219, rubber sheet, cellular, MIL-R-6130 (Seawolf)",
    "9320-01-426-2223, rubber sheet, cellular, MIL-R-6130 (Seawolf)"
   ],
   "files": {
    "package": "MIL-R-6130C package.pdf",
    "scan": "MIL-R-6130C legacy scan.pdf",
    "clean": "MIL-R-6130C clean copy.pdf",
    "record": "MIL-R-6130C validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, all scanned. SHA-256 6f9b8b69a0b6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,006 of 4,032 items agreed. All 8 differences were settled against the page image. A second pass settled 60 from the sheet's layout (a point the scan did not print).",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "10 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 7 tables (217 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-R-6130C is a material specification for chemically blown cellular rubber sheets and molded shapes (Type I open cell and Type II closed cell, Grades A, B and C, soft, medium and firm conditions) and has no dimensioned part drawing: it sets the physical properties in Table I (apparent density, compression deflection, low temperature resistance, accelerated aging, recovery, flexing, flame resistance, shrinkage, water absorption, oil aging and sulfur content), skin, finish, marking, inspection, test methods and packaging, leaves the dimensions of sheets and molded shapes to the procuring activity (3.7.1), gives only sheet tolerances in Table II by thickness (under 0.125, 0.125 to 0.500 and over 0.500 inch) and by length and width (under 36 inch, 36 inch and over) for each type, and refers molded-shape tolerances to drawings, contracts or the procuring activity (3.7.2.2); Figure 1 (compression deflection apparatus, lever ratios 16 to 1.6 and 10 to 1.6) and Figure 2 (flame-resistance setup, 1/2 inch) dimension test equipment, and the sizes in 4.5, such as 1.625 inch diameter by 1 inch and 2 by 2 by 1 inch, are test specimens.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 2 - Cancellation, 19 March 2001.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-S-16216K(SH)",
   "slug": "mil-s-16216k-sh",
   "title": "Steel plate, alloy, structural, high yield strength (HY-80 and HY-100)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-S-16216K(SH) Steel plate, alloy",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 43,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "19 June 1987",
   "status": "Canceled, 3 June 2013",
   "newest": "Revision K Notice 2 - Cancellation, 3 June 2013",
   "superseding": "Notice 2 for Replacement Information",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-S-16216K(SH) package.pdf",
    "scan": "MIL-S-16216K(SH) legacy scan.pdf",
    "clean": "MIL-S-16216K(SH) clean copy.pdf",
    "record": "MIL-S-16216K(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "43 pages, all scanned. SHA-256 e3b9ec66b37b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "10,086 of 10,129 items agreed. All 21 differences were settled against the page image. A second pass settled 1 from a second printing in the document. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "57 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "23 pages of searchable text, 15 tables (1,147 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-S-16216K is a material specification for sheared or gas cut HY-80 and HY-100 alloy steel plate, HY-80 up to 8 inches thick and HY-100 up to 6 inches (1.1), in the sizes each order states (6.2.1): it sets chemical composition, tensile and impact properties, tempering and stress relief temperatures and ultrasonic acceptance standards (Tables I to V), and thickness, weight, flatness, camber, width and length tolerances for any ordered plate (Tables VI to XII); Figures 1 and 4 are blank report forms for plate gauging and ultrasonic inspection, and Figures 2 and 3 only center test specimens at the plate ends W/2 in from the side edges, where W is half the plate width.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision K Notice 2 - Cancellation, 3 June 2013.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-S-19500/126C",
   "slug": "mil-s-19500-126c",
   "title": "Semiconductor device, transistor, germanium, high-frequency npn types 2N1302, 2N1304, 2N1306, 2N1308 and pnp types 2N1303, 2N1305, 2N1307, 2N1309",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-S-19500_126C Semiconductor device, transistor",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 15,
   "solids": 8,
   "dimensions": 192,
   "dimensions_met": 192,
   "kind": "Military specification",
   "dated": "24 March 1971",
   "status": "Inactive, 16 May 2017",
   "newest": "Revision C Notice 4 - Validation, 16 May 2017",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5961-00-892-0800, transistor, MIL-S-19500/126 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-S-19500_126C package.pdf",
    "scan": "MIL-S-19500_126C legacy scan.pdf",
    "clean": "MIL-S-19500_126C clean copy.pdf",
    "record": "MIL-S-19500_126C validation record.pdf",
    "sheet": "MIL-S-19500_126C 3D model.pdf",
    "parts": "MIL-S-19500_126C parts list.pdf",
    "inspection": "MIL-S-19500_126C inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/2N1306-freecad.png",
    "pair": "Models/views/2N1306-pair.png",
    "record": "Models/views/2N1306-record.png",
    "front": "Models/views/2N1306-front.png",
    "top": "Models/views/2N1306-top.png",
    "right": "Models/views/2N1306-right.png",
    "cut": "Models/views/2N1306-cut.png"
   },
   "shown_part": "2N1306",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the eight TO-5 transistor types 2N1302 to 2N1309, which share one outline: a .320 diameter can whose top is .250 from the seating plane, a .3525 diameter flange with a tab .031 wide and .025 thick reaching .037 beyond it, and three leads 1.625 long, .0175 in diameter to .250 from the seating plane and .0185 beyond, centered .0707 from both centerlines and .1414 apart.",
   "not_modeled": [
    "The inside of the device (the germanium die, the hollow can and the glass seals of the leads in the header): each solid is the outside shape as one body.",
    "The .007 (.18 mm) maximum radius called out where the tab meets the flange: the solid has sharp corners there.",
    "The rounded top edge of the can and the flare from the can into the flange that the side view draws; neither is dimensioned, and the flare lies in zone H, whose outline note 5 leaves uncontrolled.",
    "The gage of figure 2 for checking lead and tab location, an inspection fixture whose outline is optional, not one of the eight types.",
    "Lead material (Kovar or alloy 52) and finish (gold plate, or tin coat when the order asks for it), marking, and the ratings and electrical tests, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, all scanned. SHA-256 e6453b3cb3c2.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,680 of 2,712 items agreed. All 32 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "100 checks on size series and limits. 9 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 7 tables (1,447 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "8 solids in STEP AP242. 192 of 192 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision C Notice 4 - Validation, 16 May 2017.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-S-20708E",
   "slug": "mil-s-20708e",
   "title": "Synchros, general specification for",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-S-20708E Synchros, general specification for",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 55,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "30 June 1987",
   "status": "Canceled, 15 September 1999",
   "newest": "Revision E Notice 1 - Cancellation, 15 September 1999",
   "superseding": "SAE-AS20708",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5990-00-929-0500, synchro, transmitter, M20708-21D001 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-S-20708E package.pdf",
    "scan": "MIL-S-20708E legacy scan.pdf",
    "clean": "MIL-S-20708E clean copy.pdf",
    "record": "MIL-S-20708E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "55 pages, all scanned. SHA-256 b60dc0538f9c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "10,978 of 11,552 items agreed. 56 differences went to a third reader. A second pass settled 1 from the document's record in ASSIST. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "281 checks on size series and limits. 6 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "36 pages of searchable text, 22 tables (1,494 cells), 16 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-S-20708E is the general specification for synchros: its outline drawings (Figures 4 to 9) and Table III give each synchro size's housing and mounting diameters and the axial distances at its mounting flange, and for sizes 11 to 37 the spline data and the shaft-end thread, but for every size Table III leaves the housing length G, the shaft extension lengths A and B and the shaft diameter U to Table II of the applicable specification sheet, so this document alone fixes no part's shape.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 1 - Cancellation, 15 September 1999. ASSIST also holds Revision E Amendment 1 (13 March 1989) and Revision E Amendment 2 (25 November 1992). They were issued after this revision and are not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 43, Runout value in note 2: read as .0008, could be .0006."
   ]
  },
  {
   "id": "MIL-S-20708/28F",
   "slug": "mil-s-20708-28f",
   "title": "Synchro, control transmitter, type 18CX4D",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-S-20708_28F Synchro, control transmitter",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification sheet",
   "dated": "13 March 1989",
   "status": "Canceled, 15 September 1999",
   "newest": "Revision F Notice 1 - Cancellation, 15 September 1999",
   "superseding": "SAE-AS20708/28",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5990-00-929-0500, synchro, transmitter, M20708/28-01D (Los Angeles)"
   ],
   "files": {
    "package": "MIL-S-20708_28F package.pdf",
    "scan": "MIL-S-20708_28F legacy scan.pdf",
    "clean": "MIL-S-20708_28F clean copy.pdf",
    "record": "MIL-S-20708_28F validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 ef908ef2b137.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "192 of 215 items agreed. All 14 differences were settled against the page image. A second pass settled 4 from the sheet's layout (a point the scan did not print). 2 marks outside the technical content are kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 3 tables (90 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-S-20708/28F is a specification sheet for the type 18CX4D control transmitter synchro, M20708/28-01D, that prints no drawing: Table I gives electrical and mechanical performance values, and Table II gives values for the letters A, B, G and U with a splined shaft and a terminal board end, letters that belong to the size 18 synchro outline drawing (Figure 6) of the general specification MIL-S-20708, which this sheet does not carry and which gives the remaining lettered dimensions in its own Table III.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision F Notice 1 - Cancellation, 15 September 1999.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-S-20708/62F",
   "slug": "mil-s-20708-62f",
   "title": "Synchro, torque receiver transmitter, type 31TRX4A",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-S-20708_62F Synchro, torque receiver transmitter",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification sheet",
   "dated": "13 March 1989",
   "status": "Canceled, 15 September 1999",
   "newest": "Revision F Notice 1 - Cancellation, 15 September 1999",
   "superseding": "SAE-AS20708/62",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5990-00-898-1393, synchro, receiver-transmitter, M20708/62-001 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-S-20708_62F package.pdf",
    "scan": "MIL-S-20708_62F legacy scan.pdf",
    "clean": "MIL-S-20708_62F clean copy.pdf",
    "record": "MIL-S-20708_62F validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 10a3e1d79db9.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "131 of 228 items agreed. All 16 differences were settled against the page image. A second pass settled 4 from the sheet's layout (a point the scan did not print). 3 marks outside the technical content are kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 3 tables (86 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-S-20708/62F is a specification sheet for the type 31TRX4A torque receiver transmitter synchro, M20708/62-01A, that prints no drawing: Table I gives electrical and performance values, Table II gives values for the letters A, B, G and U with the shaft style and terminal end but no figure shows what each letter measures, and the sheet refers to MIL-S-20708 for its other requirements.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision F Notice 1 - Cancellation, 15 September 1999.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-T-16420K(SH)",
   "slug": "mil-t-16420k-sh",
   "title": "Tube, copper-nickel alloy, seamless and welded (copper alloy numbers 715 and 706)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-T-16420K(SH) Tube, copper-nickel alloy",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 22,
   "solids": 147,
   "dimensions": 730,
   "dimensions_met": 730,
   "kind": "Military specification",
   "dated": "14 April 1978",
   "status": "Active, 18 February 2026",
   "newest": "Revision K Notice 1 - Validation, 18 February 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "4710-01-422-9580, tube, metallic, M16420 70-30 T1 C1650 G2 1.900 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-T-16420K(SH) package.pdf",
    "scan": "MIL-T-16420K(SH) legacy scan.pdf",
    "clean": "MIL-T-16420K(SH) clean copy.pdf",
    "record": "MIL-T-16420K(SH) validation record.pdf",
    "sheet": "MIL-T-16420K(SH) 3D model.pdf",
    "parts": "MIL-T-16420K(SH) parts list.pdf",
    "inspection": "MIL-T-16420K(SH) inspection report.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {
    "iso": "Models/views/MIL-T-16420_70-30_C700_2.875-freecad.png",
    "pair": "Models/views/MIL-T-16420_70-30_C700_2.875-pair.png",
    "record": "Models/views/MIL-T-16420_70-30_C700_2.875-record.png",
    "front": "Models/views/MIL-T-16420_70-30_C700_2.875-front.png",
    "top": "Models/views/MIL-T-16420_70-30_C700_2.875-top.png",
    "right": "Models/views/MIL-T-16420_70-30_C700_2.875-right.png",
    "cut": "Models/views/MIL-T-16420_70-30_C700_2.875-cut.png"
   },
   "shown_part": "MIL-T-16420 70-30 C700 2.875",
   "application": "FreeCAD 1.1.4",
   "modeled": "One straight one-foot piece of round tube for each of the 147 standard sizes of Tables III and IV: 115 of copper alloy 715 (70-30) in classes 200, 700, 1650, 3300 and 6000 and 32 of alloy 706 (90-10) in classes 50 and 200, each with its outside diameter at the middle of its Table V average diameter limits and its wall at the table minimum.",
   "not_modeled": [
    "Delivered lengths: type I mill lengths up to 25 feet (plus 1 inch) with the shortest lengths and the share of longer lengths of Table VII, type II lengths of 12 to 24 feet plus or minus 6 inches, and specific lengths with the Table VIII tolerances (3.8.5); each solid is a one-foot piece.",
    "The type II weld seam (3.8.4): the smooth outside reinforcement and an inside weld crown up to the Table VI maximum (1/32, 1/16, 3/32 inch by wall thickness); the solids have the flush inside weld that 3.8.4 permits.",
    "Straightness (3.8.8; Table X for light drawn alloy 706 type I tube over 3 feet long), the 10 percent overweight limit for a lot (3.8.1), the 125 microinch surface roughness and burr-free ends (3.12), identification marking (3.10) and the grinding allowed to remove defects (3.9).",
    "Nonstandard (special class) tube ordered to dimensions other than those of Tables III and IV (1.2.2, 3.7.1), and the ultrasonic reference standard with its notches (Figure 2), which is test equipment.",
    "Composition, temper and grade, and the chemical, mechanical and nondestructive requirements (Tables I and II, 3.2 to 3.6)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "22 pages, all scanned. SHA-256 7413f475b47b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "6,165 of 6,396 items agreed. All 61 differences were settled against the page image. 1 value that the scan prints in a doubtful form is listed for the engineer.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "826 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 14 tables (1,384 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "147 solids in STEP AP242. 730 of 730 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K Notice 1 - Validation, 18 February 2026. ASSIST also holds Revision K Amendment 1 (16 September 1988). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. The page breaks this word at the end of a line with a hyphen, so whether it is written with a hyphen cannot be seen; it is kept as read.",
    "Printed value to confirm. Table VII, column 'Class 200 / Length (min.) / Feet': 5 then 5.5. Page 8 prints 5 for 9.625 and 5-1/2 for 10.750 in the class 200 Length (min.) column, as agreed; the column otherwise only falls or holds (12, 10, 8, 5, 5-1/2, 3-1/2) while the class 200 longer lengths fall 12, 10, 8, 6 over the same rows, so the printed 5 at 9.625 (or 5-1/2 at 10.750) looks out of step with its series, a point for an engineer.",
    "Model. Table V starts at 0.250 inch, so the 0.125 inch tube of classes 3300 and 6000 (0.028 wall) has no average outside diameter tolerance; its solids are built and checked at the nominal 0.125.",
    "Model. Table IX gives roundness tolerances only for a ratio of minimum wall to nominal outside diameter of 0.01 and over, and five sizes of alloy 706 class 50 fall below it (20.000 x .180, 22.000 x .180, 22.750 x .180, 30.000 x .250, 40.000 x .312, ratios 0.0078 to 0.0090), so the sheet gives them no roundness tolerance and their solids carry no roundness check.",
    "Model. Table IV prints calculated weights of 12.2 and 15.3 lb/ft for alloy 706 class 200 tube 7.625 x .140 and 8.625 x .151, the weights Table III prints for alloy 715 at its .134 and .148 walls, while 0.323 lb/cu in (3.8.1) gives 12.76 and 15.58 lb/ft at the Table IV walls (which Table VII also prints) and the solids at those minimum walls weigh 12.74 and 15.56 lb/ft, so the engineer must confirm the walls and weights from which 3.8.2 sets the 13 percent overweight limit.",
    "Model. Table III prints 14.1 lb/ft for alloy 715 class 700 tube 5.563 x .220, while 0.323 lb/cu in gives 14.31 lb/ft (the same calculation is within 0.4 percent of the printed weight on 144 of the 147 sizes of Tables III and IV), so the engineer must confirm the calculated weight from which 3.8.2 sets the 13 percent overweight limit."
   ]
  },
  {
   "id": "MIL-T-17221B(SHIPS)",
   "slug": "mil-t-17221b-ships",
   "title": "Transformers, power, distribution, single phase, 400 hertz, insulation system class 220\u00b0C, dry (air cooled) (naval shipboard use)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-T-17221B(SHIPS) Transformers, power",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 18,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "1 June 1973",
   "status": "Active, 25 February 2026",
   "newest": "Revision B Notice 2 - Validation, 25 February 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5950-00-262-2249, transformer, power, MIL-T-17221 (Los Angeles)"
   ],
   "files": {
    "package": "MIL-T-17221B(SHIPS) package.pdf",
    "scan": "MIL-T-17221B(SHIPS) legacy scan.pdf",
    "clean": "MIL-T-17221B(SHIPS) clean copy.pdf",
    "record": "MIL-T-17221B(SHIPS) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, all scanned. SHA-256 cc07d336b710.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "6,856 of 6,995 items agreed. 77 differences went to a third reader. 20 readings remain open.",
     "result": "20 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "238 checks on size series and limits. 9 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "21 pages of searchable text, 9 tables (450 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-T-17221B(SHIPS) is the military specification for dry-type, air-cooled, single-phase 400 hertz shipboard distribution transformers of 1 to 125 kVA: Figures 1 and 2 with Table III dimension only each size's mounting interface (hole spacings A, B and E, bolt size D with hole diameter equal to the bolt size plus or minus 1/16 inch, height F of the deck-mounting holes above the deck, distance G from the lower holes to the bulkhead or brace, and the recommended minimum spacing C for the drilling plans of adjacent units), Table II limits each size only by maximum weight, volume, losses, regulation, exciting current and peak inrush current, Table IV gives only a minimum distance between lead supports and cover, and Figure 3 is a typical drawing-sheet layout with blank forms, so no figure or table fixes the shape of the transformer enclosure.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 2 - Validation, 25 February 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 4, line 3, the word before 'current (ac)': read as alternating, could be ating.",
    "Open reading. Page 16, Page header, printed sideways at the edge of the sheet: read as MIL-T-17221B(SHIPS), could be MIL-T-17221B(SHIP.",
    "Open reading. Figure 3, callout, overall dimension above the views: read as 40\", could be 40\u00b0.",
    "Open reading. Figure 3, callout, performance data footnote: read as 190\u00b0 C, could be 130\u00b0 C.",
    "Open reading. Figure 3, callout, exception note: read as MIL-T-17221B,, could be MIL-T-17221,.",
    "Open reading. Figure 3, callout, spacing note in top view: read as DISTANCE BETWEEN CENTERS OF ADJACENT TRANSFS. SHALL NOT BE LESS THAN.",
    "Open reading. Figure 3, callout, ventilation note: read as LOUVRES, could be LOUVERS.",
    "Open reading. Figure 3, callout, mounting hole note: read as 3/8 DIA. BOLTS 4 TOTAL, could be 5/8 DIA. BOLTS 4 TOTAL.",
    "Open reading. Figure 3, callout, clear space note in right view: read as THIS SPACE TO BE KEPT CLEAR FOR REMOVAL OF COVER.",
    "Open reading. Figure 3, callout, margin dimensions in right view: read as 4\" MARGIN; 1/2\", could be 1\" MARGIN; 1\".",
    "Open reading. Figure 3, callout, sectional view: read as COIL NOT SHOWN IN DETAIL, could be NOT SHOWN IN DETAIL.",
    "Open reading. Figure 3, callout, last performance data column: read as MAXIMUM PEAK INRUSH CURRENT, could be MAXIMUM INRUSH CURRENT.",
    "Open reading. Figure 3, callout, nameplate note 1: read as ENGRAVED OR ETCHED AND FILLED BLACK, could be ENGRAVED OR ETCHED BLACK.",
    "Open reading. Figure 3, callout, nameplate note 2: read as STAINLESS STEEL OR BRASS (1/16 THK.), could be STAINLESS STEEL, OR BRASS 1/16 THICK.",
    "Open reading. Figure 3, callout, identification plate hole: read as DIA. HOLE.",
    "Open reading. Figure 3, callout, fiber glass insulation sketch: read as GLASS TAPE OR SLEEVING IS USED FOR PROTECTIVE COVERING, could be FIBER GLASS TAPE OR SLEEVING IS USED FOR PROTECTIVE COVERING.",
    "Open reading. Figure 3, callout, fiber glass insulation sketch: read as DESCRIPTION OF ALL OTHER APPLICATIONS (i.e. TYING CORD, SLEEVING AND; INSULATION, LAYER INSULATION).",
    "Open reading. Figure 3, callout, cable connection sketch: read as COIL LEADS ARE TAPED WITH GLASS TAPE WHERE PASSING THROUGH LEAD.",
    "Open reading. Figure 3, callout, left margin letters: read as A; B; C.",
    "Open reading. Figure 3, form headings not transcribed: read as .",
    "Printed value to confirm. Table II on page 4 prints a maximum peak inrush current of 950 amperes for 125 kVA, below the 1460 amperes for 100 kVA. Every other row rises with kVA, and at the 450-volt primary that footnote 1 names, 950 amperes is 3.4 times the 278-ampere rated current against 6.6 to 7.8 times for the 50 to 100 kVA rows, so the value looks wrong for its series.",
    "Printed value to confirm. Table V on page 7 prints .477 inch for the 120-volt leads of the 125 kVA transformer without footnote 1, the mark for two leads in parallel that the 75 and 100 kVA rows carry for the same .477. As printed, one .477 lead for 125 kVA is smaller than the single .601 lead for 50 kVA, so the 125 kVA entry looks wrong for its series."
   ]
  },
  {
   "id": "MIL-T-43435B",
   "slug": "mil-t-43435b",
   "title": "Tape, lacing and tying",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-T-43435B Tape, lacing and tying",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 15,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "25 September 1974",
   "status": "Canceled, 2 February 1998",
   "newest": "Revision B Notice 2 - Cancellation, 2 February 1998",
   "superseding": "A-A-52080 THRU A-A-52084",
   "preparing_activity": "DLA Troop Support - Industrial Hardware Items of Supply Stdz. (S/S by CC/CQ",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-T-43435B package.pdf",
    "scan": "MIL-T-43435B legacy scan.pdf",
    "clean": "MIL-T-43435B clean copy.pdf",
    "record": "MIL-T-43435B validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, all scanned. SHA-256 43d8de34a6de.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,453 of 3,485 items agreed. All 21 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "76 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 9 tables (216 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-T-43435B is the military specification for flat braided lacing and tying tape and has no drawing: it sets the yarn for each of five types (I nylon, II polyester, III tetrafluorocarbon, IV glass, V heat-resistant aromatic polyamide, 3.2), a flat braid construction (3.3) and seven finishes (A to G, 3.6), gives by size only a width (\u00b110 percent), a thickness (\u00b10.003 inch, \u00b10.004 inch for size 5 of types I and II), a minimum breaking strength and a maximum elongation (Tables I to V: sizes 1 to 5 for types I, II and IV, sizes 2, 4 and 5 for type III, sizes 1 to 4 for type V), measures width and thickness under a tension load of 5\u00a0\u00b1\u00a01 percent of the minimum breaking strength (4.2.5.4, Table VIII), and puts sizes 1 and 2 up in 250 yard and sizes 3 to 5 in 500 yard lengths on spools or tubes it does not dimension (3.11), so it fixes no part shape.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 2 - Cancellation, 2 February 1998. ASSIST also holds Revision B Amendment 1 (2 December 1976). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-W-22759E",
   "slug": "mil-w-22759e",
   "title": "Wire, electrical, fluoropolymer-insulated, copper or copper alloy",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-W-22759E Wire, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 43,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "31 December 1990",
   "status": "Canceled, 8 December 2004",
   "newest": "Revision E Notice 1 - Cancellation, 8 December 2004",
   "superseding": "SAE-AS22759",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-W-22759E package.pdf",
    "scan": "MIL-W-22759E legacy scan.pdf",
    "clean": "MIL-W-22759E clean copy.pdf",
    "record": "MIL-W-22759E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "43 pages, all scanned. SHA-256 324f07dae8b6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "15,044 of 15,105 items agreed. All 21 differences were settled against the page image. A second pass settled 1 from a closer look at the page.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "394 checks on size series and limits. 34 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "20 pages of searchable text, 14 tables (830 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-W-22759E is the general specification for fluoropolymer-insulated copper and copper alloy wire and has no drawing of the wire: it sets materials, insulation component properties (Table I), stranding, conductor diameter limits, maximum resistance and alloy conductor breaking strength for sizes 30 to 0000 (Table II), finished wire tests, quality assurance and packaging, and leaves the insulation construction, the finished wire diameter and the choice between the general purpose and small diameter conductor limits to the specification sheets (3.5.1.4, 3.5.2, Table III), which it does not reproduce and whose number begins every part number (M22759/1-22-9, 1.2.1); Figures 2 to 4 dimension test fixtures (the circumferential elongation mandrel and specimen holding block and the post-flame dielectric contact plate jig), not wire, and Figure 1 has callouts only.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 1 - Cancellation, 8 December 2004. ASSIST also holds Revision E Amendment 1 (7 May 1991) and Revision E Amendment 2 (16 October 1998). They were issued after this revision and are not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-W-22759/32C",
   "slug": "mil-w-22759-32c",
   "title": "Wire, electrical, fluoropolymer-insulated, crosslinked modified etfe, lightweight, tin-coated copper, 150\u00b0C, 600 volt",
   "class": "Los Angeles",
   "folder": "Los Angeles/MIL-W-22759_32C Wire, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 10,
   "dimensions": 30,
   "dimensions_met": 30,
   "kind": "Military specification sheet",
   "dated": "9 September 1988",
   "status": "Canceled, 8 December 2004",
   "newest": "Revision C Notice 1 - Cancellation, 8 December 2004",
   "superseding": "SAE-AS22759/32",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 2
   },
   "stock_examples": [
    "6145-01-186-5583, wire, electrical, M22759/32-12-9 (Los Angeles, Seawolf)",
    "6145-01-170-6398, wire, electrical, M22759/32-16-9 (Seawolf)"
   ],
   "files": {
    "package": "MIL-W-22759_32C package.pdf",
    "scan": "MIL-W-22759_32C legacy scan.pdf",
    "clean": "MIL-W-22759_32C clean copy.pdf",
    "record": "MIL-W-22759_32C validation record.pdf",
    "sheet": "MIL-W-22759_32C 3D model.pdf",
    "parts": "MIL-W-22759_32C parts list.pdf",
    "inspection": "MIL-W-22759_32C inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M22759_32-20-_-freecad.png",
    "pair": "Models/views/M22759_32-20-_-pair.png",
    "record": "Models/views/M22759_32-20-_-record.png",
    "front": "Models/views/M22759_32-20-_-front.png",
    "top": "Models/views/M22759_32-20-_-top.png",
    "right": "Models/views/M22759_32-20-_-right.png",
    "cut": "Models/views/M22759_32-20-_-cut.png"
   },
   "shown_part": "M22759/32-20-*",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid of revolution for each of the 10 Table I part numbers, M22759/32-30-* to M22759/32-12-*: a 1.000 inch representative piece of finished wire with the conductor bared for 0.250 inch at one end, as Figure 1 draws it, the conductor at the middle of its stranded conductor diameter limits and the crosslinked ETFE insulation at its nominal finished wire diameter.",
   "not_modeled": [
    "The 7, 19 or 37 strands of each conductor (Table I gives strands x AWG gauge of strands) and their tin coating; each conductor is one round solid at the middle of its stranded conductor diameter limits.",
    "Materials (tin-coated copper conductor; crosslinked, extruded, modified ETFE insulation), the color code designator (*) of MIL-STD-681 with its MIL-STD-104 colors and any striping or banding, and the product identification, which the sheet does not require for size 24 and smaller.",
    "Requirements that are not shape: the Table I maximum resistance at 20\u00b0C and maximum weight per 1000 feet, the Table II bend-test mandrels (.250 to 2.00 inch) and loads, the 150\u00b0C and 600 volt ratings, and the electrical, thermal, flammability, physical-property, immersion (20 Table III fluids) and propellant tests, among them shrinkage 0.125 inch max and a thermal shock change of 0.060 inch max.",
    "Wire length, which the sheet sets by Schedule B."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, all scanned. SHA-256 ce95117b9e05.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,190 of 1,215 items agreed. All 16 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "81 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 5 tables (225 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "10 solids in STEP AP242. 30 of 30 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 1 - Cancellation, 8 December 2004. ASSIST also holds Revision C Amendment 1 (29 September 1993) and Revision C Amendment 2 (7 September 1999). They were issued after this revision and are not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS 15574",
   "slug": "ms-15574",
   "title": "Lamp, incandescent T-7, candelabra screw",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS 15574 Lamp, incandescent t-7",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 2,
   "dimensions": 8,
   "dimensions_met": 8,
   "kind": "Military standard",
   "dated": "14 JUL 1961",
   "status": "Canceled, 21 February 1992",
   "newest": "Revision B Notice 1 - Cancellation, 21 February 1992",
   "superseding": "A-A-50591",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-617-1719, lamp, incandescent, MS15574-1 (Los Angeles)"
   ],
   "files": {
    "package": "MS 15574 package.pdf",
    "scan": "MS 15574 legacy scan.pdf",
    "clean": "MS 15574 clean copy.pdf",
    "record": "MS 15574 validation record.pdf",
    "sheet": "MS 15574 3D model.pdf",
    "parts": "MS 15574 parts list.pdf",
    "inspection": "MS 15574 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS15574-2-freecad.png",
    "pair": "Models/views/MS15574-2-pair.png",
    "record": "Models/views/MS15574-2-record.png",
    "front": "Models/views/MS15574-2-front.png",
    "top": "Models/views/MS15574-2-top.png",
    "right": "Models/views/MS15574-2-right.png",
    "cut": "Models/views/MS15574-2-cut.png"
   },
   "shown_part": "MS15574-2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of MS15574-1 and MS15574-2, which share one outline: a cylinder of the 7/8 inch T-7 bulb diameter and the 2-5/8 inch overall length that encloses the lamp as the figure draws it.",
   "not_modeled": [
    "The rounded end and shoulder of the T-7 bulb, the candelabra screw base and its thread, and the center contact, which the figure draws without dimensions.",
    "The filament, the glass wall and the inside of the lamp.",
    "The ratings the table gives for each dash number (watts, volts, finish, filaments, hours of life and lumen output), which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 5ebfe377f8ba.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "206 of 225 items agreed. All 8 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 1 table (18 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 8 of 8 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 1 - Cancellation, 21 February 1992.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet prints 7/8 and 2-5/8 with no tolerance and does not say whether either is a maximum; W-L-101, the procurement specification it names, sends lamp dimensions to the applicable ANSI standard (paragraph 3.8 of revision H), and an engineer must take the limits from there before using the cylinder as a space claim."
   ]
  },
  {
   "id": "MS 15795",
   "slug": "ms-15795",
   "title": "Washer, flat-metal, round general purpose",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS 15795 Washer, flat-metal",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 277,
   "dimensions": 1662,
   "dimensions_met": 1662,
   "kind": "Military standard",
   "dated": "10 JUL 86",
   "status": "Canceled, 7 February 2000",
   "newest": "Revision G Notice 1 - Cancellation, 7 February 2000",
   "superseding": "NASM15795",
   "preparing_activity": "DLA Troop Support - Industrial Hardware Items of Supply Stdz. (S/S by CC/CQ",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 2,
    "Seawolf": 1
   },
   "stock_examples": [
    "5310-00-616-6750, washer, flat, MS15795-414 (Los Angeles, Seawolf)",
    "5310-01-500-3234, washer, flat, MS15795-448 (Los Angeles)"
   ],
   "files": {
    "package": "MS 15795 package.pdf",
    "scan": "MS 15795 legacy scan.pdf",
    "clean": "MS 15795 clean copy.pdf",
    "record": "MS 15795 validation record.pdf",
    "sheet": "MS 15795 3D model.pdf",
    "parts": "MS 15795 parts list.pdf",
    "inspection": "MS 15795 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS15795-818-freecad.png",
    "pair": "Models/views/MS15795-818-pair.png",
    "record": "Models/views/MS15795-818-record.png",
    "front": "Models/views/MS15795-818-front.png",
    "top": "Models/views/MS15795-818-top.png",
    "right": "Models/views/MS15795-818-right.png",
    "cut": "Models/views/MS15795-818-cut.png"
   },
   "shown_part": "MS15795-818",
   "application": "FreeCAD 1.1.4",
   "modeled": "277 flat round washers, one solid per dash number in Tables I to V (CRES, nickel-copper alloy, brass, copper and aluminum alloy), each a plain annulus with hole diameter A, outside diameter B and thickness C.",
   "not_modeled": [
    "Black oxide finish code B on CRES dash numbers (for example MS15795-801B): same geometry as the uncoated part, not modeled separately.",
    "Material, coating, passivation and magnetic permeability requirements (requirements 1, 2 and 4).",
    "Flatness tolerance of .005 for outside diameters up to .875 and .010 above (requirement 3); solids are perfectly flat.",
    "Cancelled dash numbers listed in Table VI and note 4, which this revision replaces."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, all scanned. SHA-256 4dd76384b451.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,475 of 3,593 items agreed. All 37 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "2,325 checks on size series and limits. 237 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 6 tables (2,930 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "277 solids in STEP AP242. 1,662 of 1,662 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision G Notice 1 - Cancellation, 7 February 2000.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table III (brass), dash number 950 prints inside diameter .266 (tolerance +.001/-.006) between dash numbers 949 and 909, both .250, in a table otherwise ordered by rising inside diameter. Confirm whether the inside diameter of dash 950 is .266 or whether the row or the value is misprinted.",
    "Printed value to confirm. Table IV (copper), dash number 550 prints thickness .032 with limits max .037 and min .032, so the minimum equals the basic thickness. Every other .032 washer with a .037 maximum in Table IV (dash 545, 547, 548 and 552) prints a minimum of .027; confirm the minimum for dash 550."
   ]
  },
  {
   "id": "MS 18235",
   "slug": "ms-18235",
   "title": "Lamp, cartridge, short cylindrical, plug-in, incandescent, plastic (flat lens type)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS 18235 Lamp, cartridge",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 1,
   "solids": 18,
   "dimensions": 198,
   "dimensions_met": 198,
   "kind": "Military standard",
   "dated": "13 January 1976",
   "status": "Active, 7 April 2021",
   "newest": "Revision C Notice 5 - Validation, 7 April 2021",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-045-4588, lamp, cartridge, MS18235 (Los Angeles)"
   ],
   "files": {
    "package": "MS 18235 package.pdf",
    "scan": "MS 18235 legacy scan.pdf",
    "clean": "MS 18235 clean copy.pdf",
    "record": "MS 18235 validation record.pdf",
    "sheet": "MS 18235 3D model.pdf",
    "parts": "MS 18235 parts list.pdf",
    "inspection": "MS 18235 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS18235-2BT-freecad.png",
    "pair": "Models/views/MS18235-2BT-pair.png",
    "record": "Models/views/MS18235-2BT-record.png",
    "front": "Models/views/MS18235-2BT-front.png",
    "top": "Models/views/MS18235-2BT-top.png",
    "right": "Models/views/MS18235-2BT-right.png",
    "cut": "Models/views/MS18235-2BT-cut.png"
   },
   "shown_part": "MS18235-2BT",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope models of the 18 incandescent lamp cartridges MS18235-1RT to -3CN, which share one outline: a flat-faced .28 diameter lens section, a .330 diameter collar whose rear face is .260 from the lens face, a .284 diameter body .634 long behind the collar, and two .040 diameter terminals projecting .203 from the base end, .160 apart on a line .020 off the vertical centerline.",
   "not_modeled": [
    "The inside of the cartridge (the incandescent lamp, its leads and how the terminals are held): each solid is the outside shape as one body.",
    "Where the plastic lens area of requirement 1 meets the aluminum body, which the sheet does not dimension.",
    "The rounded corners the figure draws on the collar and the pointed tips it draws on the terminals, neither of which is dimensioned.",
    "Materials and finishes (MIL-L-3661 plastic for the lens area, finished aluminum, corrosion-resistant steel or 18% nickel silver terminals), the legend-ready lens face, marking, lens color and transmittance, and the table's design volts, current, candle power and lamp industry number, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 68f1796a9aea.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "471 of 519 items agreed. 34 differences went to a third reader. A second pass settled 2 from the document's record in ASSIST, 1 from a second printing in the document. 8 readings remain open.",
     "result": "8 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "86 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (154 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "18 solids in STEP AP242. 198 of 198 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 5 - Validation, 7 April 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 1, row MS18235-2RT, column 'Design current (amps)': read as .08, could be .06.",
    "Open reading. Page 1, row MS18235-2GT, column 'Design current (amps)': read as .08, could be .06.",
    "Open reading. Page 1, row MS18235-2YT, column 'Design current (amps)': read as .08, could be .06.",
    "Open reading. Page 1, row MS18235-2BT, column 'Design current (amps)': read as .08, could be .06.",
    "Open reading. Page 1, row MS18235-2WT, column 'Design current (amps)': read as .08, could be .06 or .05.",
    "Open reading. Page 1, row MS18235-2CN, column 'Design current (amps)': read as .08, could be .06.",
    "Open reading. Page 1, row MS18235-3RT, column 'Design volts': read as 28, could be 26.",
    "Open reading. Page 1, row MS18235-3GT, column 'Design volts': read as 28, could be 26.",
    "Model. The figure gives no width for the .330 collar and so does not place its front face; the solids take .080, about its width as drawn, and an engineer must confirm it against the LH 87 and LH 90 indicator-light housings the cartridge must mate with (requirement 4) before the solids are used for fit."
   ]
  },
  {
   "id": "MS 18237",
   "slug": "ms-18237",
   "title": "Lamp, cartridge, long cylindrical, plug-in, neon, plastic (flat lens type)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS 18237 Lamp, cartridge",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 8,
   "dimensions": 88,
   "dimensions_met": 88,
   "kind": "Military standard",
   "dated": "13 January 1976",
   "status": "Active, 10 May 2021",
   "newest": "Revision C Notice 5 - Validation, 10 May 2021",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "6240-00-931-9654, lamp, cartridge, MS18237-1RN (Los Angeles, Seawolf)"
   ],
   "files": {
    "package": "MS 18237 package.pdf",
    "scan": "MS 18237 legacy scan.pdf",
    "clean": "MS 18237 clean copy.pdf",
    "record": "MS 18237 validation record.pdf",
    "sheet": "MS 18237 3D model.pdf",
    "parts": "MS 18237 parts list.pdf",
    "inspection": "MS 18237 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS18237-2RN-freecad.png",
    "pair": "Models/views/MS18237-2RN-pair.png",
    "record": "Models/views/MS18237-2RN-record.png",
    "front": "Models/views/MS18237-2RN-front.png",
    "top": "Models/views/MS18237-2RN-top.png",
    "right": "Models/views/MS18237-2RN-right.png",
    "cut": "Models/views/MS18237-2RN-cut.png"
   },
   "shown_part": "MS18237-2RN",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope models of the 8 neon lamp cartridges MS18237-1RN to -2CN, which share one outline: a flat-faced .28 diameter plastic lens section, a .330 diameter raised ring whose rear face is .45 from the lens face, a .284 diameter aluminum body .634 long behind the ring, and two .040 diameter terminals projecting .203 from the rear face, .160 apart on a line .020 off the vertical centerline.",
   "not_modeled": [
    "The inside of the cartridge (neon lamp, internal resistor and wiring): each solid is the outside shape as one body.",
    "The joint between the plastic lens and the aluminum body, and the line the figure draws across the body just ahead of the rear face; neither is dimensioned and neither changes the outline.",
    "Materials and finishes (MIL-L-3661 plastic for the lens, finished aluminum, corrosion-resistant steel or 18% nickel silver terminals), the legend-ready lens face, marking, lens color and transmittance, and the table's circuit volts, resistor and current, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 c6ffdfb583b8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "316 of 358 items agreed. All 25 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "26 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (80 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "8 solids in STEP AP242. 88 of 88 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 5 - Validation, 10 May 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS 21919",
   "slug": "ms-21919",
   "title": "Clamp, loop type, cushioned, support",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS 21919 Clamp, loop type",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 104,
   "dimensions": 1872,
   "dimensions_met": 1872,
   "kind": "Military standard",
   "dated": "30 SEPT 81",
   "status": "Inactive, 8 October 2013",
   "newest": "Revision E Notice 5 - Validation, 8 October 2013",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5340-01-497-9278, clamp, loop, MS21919 (Los Angeles)"
   ],
   "files": {
    "package": "MS 21919 package.pdf",
    "scan": "MS 21919 legacy scan.pdf",
    "clean": "MS 21919 clean copy.pdf",
    "record": "MS 21919 validation record.pdf",
    "sheet": "MS 21919 3D model.pdf",
    "parts": "MS 21919 parts list.pdf",
    "inspection": "MS 21919 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS21919WDG27-freecad.png",
    "pair": "Models/views/MS21919WDG27-pair.png",
    "record": "Models/views/MS21919WDG27-record.png",
    "front": "Models/views/MS21919WDG27-front.png",
    "top": "Models/views/MS21919WDG27-top.png",
    "right": "Models/views/MS21919WDG27-right.png",
    "cut": "Models/views/MS21919WDG27-cut.png"
   },
   "shown_part": "MS21919WDG27",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid models of the MS21919 cushioned loop clamp for every dash number from -1 to -66, once with the aluminium-band dimensions (code DG) and once with the steel/CRES-band dimensions (code CG): the metal band with its loop, joggle bend, two flat tabs, two in-line mounting holes and radiused tab ends, fused with the channel-section cushion around the loop.",
   "not_modeled": [
    "The molded wedge (dimension B, flags 1, 3 and 4) required on -2 thru -48 is not modeled; the B values are recorded as parameters only.",
    "The small joggle in the lower tab that brings the tab surfaces flush within .010 (View B) and the optional stiffening bead are not modeled; the lower tab is flat.",
    "Only one cushion material code per band column is built (DG for aluminium, CG for steel/CRES); the other codes (DE, DF, CE, CF, CH, CJ, F, G, H) share the same dimensions and differ only in material.",
    "Band and cushion are fused into one solid, so the band inside the cushion is not a separate body.",
    "Materials, finishes, cushion colours and the interchangeability table are not geometry and are not modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, all scanned. SHA-256 26aee7ec8f6a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,447 of 1,590 items agreed. All 103 differences were settled against the page image. 3 marks outside the technical content are kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "687 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 2 tables (808 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "104 solids in STEP AP242. 1,872 of 1,872 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision E Notice 5 - Validation, 8 October 2013. ASSIST also holds Revision E Amendment 1 (31 January 2001). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The B column on sheet 2 prints two stacked values for each group of sizes (.046 over .110 for -2 and -3, .093 over .125 for -4 thru -10, .155 over .312 for -11 thru -48) under a heading of \u00b1.032, while the acceptable wedge configurations on sheet 1 label the wedge height, base, chamfer leg and minimum radius all with the single letter B. The engineer must decide whether the two values are limits or alternatives and which applies to each wedge feature before the wedge can be built.",
    "Model. The main view on sheet 1 draws the cushion along the straight lower leg and down the upper leg to the joggle, but gives no dimension for where it ends; the model carries it on the loop arc only. The engineer must set the cushion end positions on both legs."
   ]
  },
  {
   "id": "MS 91528",
   "slug": "ms-91528",
   "title": "Knobs-control, plastic (round, concentric, pointer, spinner, spinner slip-clutch, bar, tactile, knob lock pointer, slip-clutch, and knob locks)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS 91528 Knobs-control, plastic",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 47,
   "solids": 117,
   "dimensions": 1248,
   "dimensions_met": 1242,
   "kind": "Military standard",
   "dated": "6 February 1984",
   "status": "Canceled, 11 December 2001",
   "newest": "Revision J Notice 3 - Cancellation, 11 December 2001",
   "superseding": "NASM91528",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 15,
   "by_class": {
    "Los Angeles": 13,
    "Seawolf": 3
   },
   "stock_examples": [
    "5355-00-163-7524, knob, MS91528-2T2B (Los Angeles, Seawolf)",
    "5355-00-419-4732, knob, MS91528-1D1B3 (Los Angeles)",
    "5355-00-584-4247, knob, MS91528-3S2B (Los Angeles)",
    "5355-00-644-2275, knob, MS91528-2D2B5 (Los Angeles)"
   ],
   "files": {
    "package": "MS 91528 package.pdf",
    "scan": "MS 91528 legacy scan.pdf",
    "clean": "MS 91528 clean copy.pdf",
    "record": "MS 91528 validation record.pdf",
    "sheet": "MS 91528 3D model.pdf",
    "parts": "MS 91528 parts list.pdf",
    "inspection": "MS 91528 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS91528-2F2B1-freecad.png",
    "pair": "Models/views/MS91528-2F2B1-pair.png",
    "record": "Models/views/MS91528-2F2B1-record.png",
    "front": "Models/views/MS91528-2F2B1-front.png",
    "top": "Models/views/MS91528-2F2B1-top.png",
    "right": "Models/views/MS91528-2F2B1-right.png",
    "cut": "Models/views/MS91528-2F2B1-cut.png"
   },
   "shown_part": "MS91528-2F2B1",
   "application": "FreeCAD 1.1.4",
   "modeled": "117 solids, one for each knob series on the 39 dimension tables of sheets 1 to 46: round, ring skirt, dial skirt and concentric lower knobs, knob lock pointer, round bar, pointer, bar and spinner knobs, their tactile and slip-clutch versions, and the knob locks, each at one representative style, shaft hole and color, with its body, skirt, pointer, bar or handle, tactile form envelope, nut clearance, shaft hole and two set screw holes.",
   "not_modeled": [
    "Each table row is built once, at the first style code of its sheet, color B and the 1/4 in. round shaft hole (code 2), or the 1/8 in. round hole (code 1) where a series takes no 1/4 in. hole. The sheets define several thousand part numbers, so the other style codes, the D flat holes (Z, Table LXXIX), the 5/64, 1/8 and 5/32 in. holes where a 1/4 in. hole is built, colors G and R, tactile forms 2 to 6, 2A to 6A and 9, knob lock thread code 1 and the splash proof knob locks are not built.",
    "The skirt slot of styles H, AL, DF, DK, R, Y and AC (J, K and L, and the .063, .188 and .125 slot on sheet 20).",
    "Markings: the .093 dots, the .020 and .035 lines, the arrows with their 30 and 15 degree and 1/64 and 1/32 limits, the .040 ring and its outside diameter F on Tables LXVIII, LXX and LXXII, the .141 to .171 line on the knob lock pointer arm, and the LOCK letters and arrows of the knob lock.",
    "The 10 to 15 ribs per inch, the serrated edge, grip ring, friction surface, seal and panel-face rings of the knob lock.",
    "The metal insert as a part of its own, the slip-clutch insert and detent, the spinner counterweight, the set screws themselves and all thread forms.",
    "The tactile form shapes within their envelopes: the raised triangle of form 1, the ridge and rounded profile of form 7, and the neck A, rim radius R1 and flare of form 8.",
    "The optional cap shapes, top contours, undercuts and bar shapes, and the taper and bend drawn on the spinner handle and on the knob lock pointer arm.",
    "Clutch slip torque, thermal shock, backlighting, colors and the tests of MIL-K-3926."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "47 pages, all scanned. SHA-256 a4c289601b21.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,892 of 5,821 items agreed. 477 differences went to a third reader. A second pass settled 5 from the sheet's layout (a point the scan did not print). 35 readings remain open. 4 marks outside the technical content are kept as transcription notes.",
     "result": "35 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "333 checks on size series and limits. 24 breaks checked against the scan: 22 as printed, 2 doubtful on the page and listed as open.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "59 pages of searchable text, 53 tables (1,702 cells), 86 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "117 solids in STEP AP242. 1,242 of 1,248 stated dimensions measure within limits; 6 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision J Notice 3 - Cancellation, 11 December 2001.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 9, note 1, between PP and KNOBS: read as PP KNOBS-THERMAL, could be PP-KNOBS-THERMAL.",
    "Open reading. Table XIX, row 1, column 9: read as 1.150, could be 1.158.",
    "Open reading. Table XXXI, column 9 header (H): read as +0.075, could be +0.025.",
    "Open reading. Table XXXIX, column 11 header: read as SET SCREWS (2 REC'D), could be SET SCREWS (2 REQ'D).",
    "Open reading. Table XLIII, row 1, column 3 (A): read as 0.788, could be 0.780.",
    "Open reading. Page 24, rows 1 and 3, column 1 (DASH NO.): read as 1U2B, 1R4B, could be IU2B, IR4B.",
    "Open reading. Table XLIX, column 13 header: read as SET SCREWS (2 REQ'D) / 1/4\" SHAFT HOLE, could be SET SCREWS (2 REQ'D) / 1 4\" SHAFT HOLE.",
    "Open reading. Page 30, callout 3: read as 10 TO 15 RIBS PER INCH (CONFIGURATION OPTIONAL), could be 16 TO 15 RIBS PER INCH (CONFIGURATION OPTIONAL).",
    "Open reading. Page 32, Part 2, styles Q and OO: read as FLUORESCENT; PHOSPHORESCENT, could be FLOURESCENT.",
    "Open reading. TACTILE FORM 2, callouts, angle label above the lobes: read as (not transcribed; only the left 120\u00b0 is legible), could be 180\u00b0.",
    "Open reading. TACTILE FORM 3, Caption, first word: read as DIMMER, could be DINNER.",
    "Open reading. TACTILE FORM 4, Caption, colour number: read as #31136', could be #31138'.",
    "Open reading. TACTILE FORM 6, callout, fraction at the half-round: read as D/2, could be B/8.",
    "Open reading. TACTILE FORM 7, Caption: read as RANGE - COLOR YELLOW LEXAN #101-402, could be first word and last digits not legible.",
    "Open reading. TACTILE FORM 7, callout under the front view: read as D, could be B.",
    "Open reading. TACTILE FORM 8, Caption, colour number: read as #101-325, could be #101-525.",
    "Open reading. TACTILE FORM 8, callout, angle: read as 48\u00b0, could be 45\u00b0.",
    "Open reading. TACTILE FORM 9, Caption, colour number: read as [illegible]', could be a FED-STD-595 gray number.",
    "Open reading. TACTILE FORM 9, callout, angle: read as 73\u00b0, could be 78\u00b0.",
    "Open reading. Page 35, Sheet list, fourth number: read as 6, could be 8.",
    "Open reading. Table LXII, row 4 (series 3), column 'Nut clearance / B min': read as 0.758, could be 0.750.",
    "Open reading. Table LXII, row 4 (series 3), column 'F \u00b10.030': read as 0.860, could be 0.840 or 0.868.",
    "Open reading. Table LXIV, row 5 (series 4), column 'F \u00b10.030': read as 1.870, could be 1.070.",
    "Open reading. Table LXIV, row 3 (series 2), column 'Clutch slip torque / Inch-ounces': read as 20 TO 36, could be 29 TO 36.",
    "Open reading. Table LXVI, header, column 8 'F \u00b10.080': read as F \u00b10.080, could be F \u00b10.030.",
    "Open reading. Page 41, callout SEE Sheet 47 Note 5D: read as 47, could be 41.",
    "Open reading. Table LXX, header, column 3 'A +0.030 -0.010': read as +0.030, could be -0.030.",
    "Open reading. Table LXXII, column 3 header: read as A -0.030 -0.010, could be A +0.030 -0.010.",
    "Open reading. Table LXXVI, row 1, column 11: read as .119-40UNC-3A, could be .112-40UNC-3A.",
    "Open reading. Table LXXVI, row 2, column 11: read as .119-40UNC-3A, could be .112-40UNC-3A.",
    "Open reading. Table LXXVI, row 2, column 3: read as 8.915, could be 0.915.",
    "Open reading. Page 43, STYLE, fifth code: read as DK, could be OK.",
    "Open reading. Page 43, SHAFT HOLE DIAMETER, code 4: read as 4 - 1/4\" \"D\" FLAT, could be 4 - 1/4\" \"O\" FLAT.",
    "Open reading. Page 43, callout .040 MIN WIDE RING TYP: read as .040, could be .060.",
    "Open reading. Table LXXIV, row 3, column 4: read as 0.750, could be 8.750.",
    "Printed value to confirm. Table I, column 'Shaft hole depth / E min': 0.655 then 0.52. The page prints 0.655 for series 3 (a clear 6, unlike the 4 of 0.405 above it), but a hole that deep leaves only 0.045 under the top of a knob whose F is 0.700, and the round slip-clutch, round tactile and round tactile slip-clutch tables (LXII, LIII, LXXIV) print 0.455 for series 3, so the printed value looks wrong for its series.",
    "Printed value to confirm. Table III, column 'Nut clearance / C min': 0.75 then 0.32. The page prints 0.750 for series 3, the same figure as the B value beside it, where Tables V, LV, LVII, LXIV and LXVI print 0.250 for series 3, so the printed value looks wrong for its series.",
    "Printed value to confirm. Table LXIV, column 'Nut clearance / B min': 0.8 then 0.485. The page prints 0.800 for series 0 (the blotted digit is closed on its lower left like an 8, not open like the 3 of 0.325 in the same row), but that exceeds the knob's own A of 0.510 and Tables III, V and LXVI print 0.300 for series 0, so the printed value looks wrong for its series.",
    "Model. Table III, series 3, prints nut clearance depth C MIN 0.750, deeper than its shaft hole depth E MIN 0.605 and set screw height D MAX 0.427, so as printed the nut clearance takes the whole shaft hole and MS91528-3D2B fails its shaft hole check; Tables V, LV, LVII, LXIV and LXVI print 0.250 for series 3, and the engineer must confirm C.",
    "Model. Table LXIV, series 0, prints nut clearance diameter B MIN 0.800, wider than the knob's own A (0.510 +0.030 -0.010) and G MAX 0.468, so as printed the clearance removes the base of MS91528-0CH1B, which fails five checks; Tables III, V and LXVI print 0.300 for series 0, and the engineer must confirm B.",
    "Model. No sheet dimensions the height of a ring skirt or the thickness and flare of a dial skirt; the solids make each half the nut clearance depth C, and the engineer must set them.",
    "Model. Sheets 8 to 13 give the bar of the round bar knobs only its length (M, or H on Table XXV); the solids use a bar 0.250 wide standing the full knob height, and the engineer must set its width, height and ends.",
    "Model. Sheet 7 does not dimension the step between the lower body G and body A of the knob lock pointer knob, or the path of its arm from the body to the tip; the solids put the step at the nut clearance depth C and run the arm straight out and straight down.",
    "Model. Sheet 35 gives the knob lock only its overall thickness, .375 \u00b1.031, and not how far the insert hexagon stands proud of the disc; the solids use 1/32.",
    "Model. Table XIX G MAX is an open reading, 1.150 or 1.158; MS91528-1II2B uses 1.150.",
    "Model. The Table XXXI H tolerance is an open reading, +0.075 or +0.025; MS91528-1P2B7 and -2P2B7 are built at the middle of +0.075 -0.005, outside the +0.025 -0.005 band.",
    "Model. Table XLIII A MAX is an open reading, 0.788 or 0.780; MS91528-3R2B uses 0.788.",
    "Model. Table LXII, series 3, B MIN (0.758 or 0.750) and F (0.860, 0.840 or 0.868) are open readings; MS91528-3AG2B uses 0.758 and 0.860.",
    "Model. Table LXIV, series 4, F is an open reading, 1.870 or 1.070 (the series 4 value of Tables III, V and LXVI); MS91528-4CH2B uses 1.870.",
    "Model. The A tolerance reads +0.030 -0.010 on Table LXX and -0.030 -0.010 on Table LXXII, each sign an open reading; the solids are built at the middle of each band as read, 0.010 over and 0.020 under nominal.",
    "Model. Table LXXVI prints the series 1 and 2 set screws for the 1/4 in. hole as .119-40UNC-3A, an open reading against the .112-40UNC-3A of every sister table; MS91528-1CZ2B1A and -2CZ2B1A carry 0.119 holes.",
    "Model. Table LXXVI, series 2, A is an open reading, 8.915 or 0.915; MS91528-2CZ2B1A uses 0.915, the series 2 value of every other slip-clutch table.",
    "Model. Table LXXIV, series 3, B MIN is an open reading, 0.750 or 8.750; MS91528-3CW2B1A uses 0.750."
   ]
  },
  {
   "id": "MS14001K",
   "slug": "ms14001k",
   "title": "Switch, toggle, positive break, environmentally sealed, solder lug, single pole, .469 mounting bushing, 25 amperes",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS14001K Switch, toggle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 10,
   "dimensions": 140,
   "dimensions_met": 140,
   "kind": "Detail specification sheet",
   "dated": "12 September 2022",
   "status": "Inactive, 12 September 2022",
   "newest": "Revision K, 12 September 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5930-01-151-4779, switch, toggle, MS14001-232 (Los Angeles)"
   ],
   "files": {
    "package": "MS14001K package.pdf",
    "scan": "MS14001K legacy scan.pdf",
    "clean": "MS14001K clean copy.pdf",
    "record": "MS14001K validation record.pdf",
    "sheet": "MS14001K 3D model.pdf",
    "parts": "MS14001K parts list.pdf",
    "inspection": "MS14001K inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS14001-272-freecad.png",
    "pair": "Models/views/MS14001-272-pair.png",
    "record": "Models/views/MS14001-272-record.png",
    "front": "Models/views/MS14001-272-front.png",
    "top": "Models/views/MS14001-272-top.png",
    "right": "Models/views/MS14001-272-right.png",
    "cut": "Models/views/MS14001-272-cut.png"
   },
   "shown_part": "MS14001-272",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the ten MS14001 toggle switches, which share one shape: the .734 by 1.336 case behind the mounting shoulder, the .469-32 bushing .469 long with its .072 keyway, the .240 lever with a 3\u00b0 taper and spherical tip .687 beyond the bushing on the bushing axis, and three flat solder lugs with .125 holes ending 1.203 behind the shoulder.",
   "not_modeled": [
    "The lever throw of 19\u00b0 \u00b14\u00b0 each side of the bushing axis and 38\u00b0 \u00b18\u00b0 between end positions; each solid shows the lever on the bushing axis, as Figure 1 draws it in solid lines.",
    "The thread form of the .469-32 UNS-2A bushing and the .030 unthreaded length next to the shoulder.",
    "The two .469-32 UNS-2B hex nuts, the lockwasher and the locking ring, which the appendix of MIL-DTL-8834 defines.",
    "The barriers between the terminals, the rounded case contour, the collar at the shoulder, the lever seal at the bushing end and the inside of the switch, which the figure draws without dimensions.",
    "The part number and terminal markings.",
    "The circuits, current ratings, weight, altitude, endurance and contact bounce requirements, which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 7fbc07c4836f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "305 of 308 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "108 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (230 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "10 solids in STEP AP242. 140 of 140 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision K, 12 September 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The weight requirement prints .090 pound maximum and 36.8 grams, but .090 pound is 40.8 grams and 36.8 grams is .081 pound."
   ]
  },
  {
   "id": "MS14002K",
   "slug": "ms14002k",
   "title": "Switch, toggle, positive break, environmentally sealed, solder lug, double pole, .469 mounting bushing, 25 amperes",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS14002K Switch, toggle",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 3,
   "solids": 10,
   "dimensions": 160,
   "dimensions_met": 160,
   "kind": "Detail specification sheet",
   "dated": "12 September 2022",
   "status": "Active, 12 September 2022",
   "newest": "Revision K, 12 September 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5930-01-015-0019, switch, toggle, MS14002-232 (Los Angeles)"
   ],
   "files": {
    "package": "MS14002K package.pdf",
    "scan": "MS14002K legacy scan.pdf",
    "clean": "MS14002K clean copy.pdf",
    "record": "MS14002K validation record.pdf",
    "sheet": "MS14002K 3D model.pdf",
    "parts": "MS14002K parts list.pdf",
    "inspection": "MS14002K inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS14002-272-freecad.png",
    "pair": "Models/views/MS14002-272-pair.png",
    "record": "Models/views/MS14002-272-record.png",
    "front": "Models/views/MS14002-272-front.png",
    "top": "Models/views/MS14002-272-top.png",
    "right": "Models/views/MS14002-272-right.png",
    "cut": "Models/views/MS14002-272-cut.png"
   },
   "shown_part": "MS14002-272",
   "application": "FreeCAD 1.1.4",
   "modeled": "Ten envelope solids, one per Table I dash number (-212 to -312), of the Figure 1 outline: the toggle lever on the bushing axis, the .469-32 bushing with its keyway, the case at its 1.015 by 1.336 by 1.203 maximum envelope and the six solder lug terminals; the ten are identical because the dash numbers differ only in circuits and current ratings.",
   "not_modeled": [
    "Lever travel: the 38\u00b0 \u00b18\u00b0 throw between the extreme positions and the 19\u00b0 \u00b14\u00b0 each side of center; every solid holds the lever on the bushing axis, including the dash numbers whose Table I center position is none.",
    "Thread form of the .469-32 UNS-2A bushing.",
    "The mounting hardware drawn on the figure (two .469-32 UNS-2B hex nuts, the .469 lockwasher and the .469 locking ring), which MIL-DTL-8834 dimensions in its appendix.",
    "The bushing bore, the lever neck and seal the lever detail draws next to the bushing, and the internal switching mechanism, none of which is dimensioned.",
    "The case contour and rounded corners, the barriers, the terminal shoulders and the lug outline beyond the hole, which the sheet makes design optional within the maximum dimensions, and the MS part number and terminal marking.",
    "Circuits, current ratings, low level life, contact bounce, altitude, the .113 pound weight limit and the other performance requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 9c5e33f4e5ff.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "539 of 548 items agreed. 4 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "108 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (230 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "10 solids in STEP AP242. 160 of 160 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K, 12 September 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table I, rows 1-6 (-212 to -272), column 2 (Opposite keyway side): read as on 2-3, 5-6 for -212, -222, -232; mom-on 2-3, 5-6 for -242, -262, -272, could be a different split of the one merged cell between the two entries."
   ]
  },
  {
   "id": "MS14153C",
   "slug": "ms14153c",
   "title": "Circuit breaker-aircraft, trip-free, push-pull 3 phase, 1 thru 35 amp, type 1",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS14153C Circuit breaker-aircraft, trip-free",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 6,
   "dimensions": 210,
   "dimensions_met": 210,
   "kind": "Military specification sheet",
   "dated": "9 JAN 90",
   "status": "Canceled, 27 August 1997",
   "newest": "Revision C Notice 1 - Cancellation, 27 August 1997",
   "superseding": "SAE-AS14153",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5925-01-498-3967, circuit breaker, MS14153-15 (Los Angeles)"
   ],
   "files": {
    "package": "MS14153C package.pdf",
    "scan": "MS14153C legacy scan.pdf",
    "clean": "MS14153C clean copy.pdf",
    "record": "MS14153C validation record.pdf",
    "sheet": "MS14153C 3D model.pdf",
    "parts": "MS14153C parts list.pdf",
    "inspection": "MS14153C inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS14153-25-freecad.png",
    "pair": "Models/views/MS14153-25-pair.png",
    "record": "Models/views/MS14153-25-record.png",
    "front": "Models/views/MS14153-25-front.png",
    "top": "Models/views/MS14153-25-top.png",
    "right": "Models/views/MS14153-25-right.png",
    "cut": "Models/views/MS14153-25-cut.png"
   },
   "shown_part": "MS14153-25",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the six MS14153 breakers, which share one outline, in the closed position: a 1.110 by 2.415 block 1.381 deep behind the mounting face, the .4375 threaded bushing to .250, the .395 button head .100 high with its top .400 above the mounting face, the .031 by .078 mounting key, and a bore along each of the six terminal screw axes, 45\u00b0 to the breaker axis, whose floor center is the terminal point.",
   "not_modeled": [
    "The tripped position, in which the button top stands .750 max above the mounting face and the white trip indicator shows .120 min above the bushing; the solids show the closed position.",
    "The three phase housings, the barriers between them, the terminal pads and straps and the inside of the breaker, which the figure draws without dimensions; the envelope is one block.",
    "The terminal screws MS51957-41 and lockwashers MS35338-137, the mounting nut MS25082 and the lockwasher MS35333-141, which their own standards define.",
    "The optional stabilizing pads of requirement 2 over the plugged phase A and C bushing holes.",
    "The amperage rating on the button (white on black, .125 min high), the word LINE at the line terminals, the colors, the thread form and the rounded edges the figure draws on the body and the button.",
    "The ratings, volt drop, weight, operating forces, endurance, calibration, interrupting capacity and environmental values of Tables I to IV, which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 a3fc86a84f7a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "357 of 520 items agreed. All 118 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "75 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 4 tables (248 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "6 solids in STEP AP242. 210 of 210 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 1 - Cancellation, 27 August 1997.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS15004B",
   "slug": "ms15004b",
   "title": "Fittings, lubrication (hydraulic) surface check, 1/4-28 taper threads, nickel-copper alloy, type IV",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS15004B Fittings, lubrication",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 3,
   "dimensions": 28,
   "dimensions_met": 28,
   "kind": "Military specification sheet",
   "dated": "10 FEB 1989",
   "status": "Canceled, 18 April 2005",
   "newest": "Revision B Notice 2 - Cancellation, 18 April 2005",
   "superseding": "SAE-AS15004",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1,
    "Ohio": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "4730-00-172-0041, fitting, lubrication, MS15004-2 (Los Angeles, Ohio, Seawolf)"
   ],
   "files": {
    "package": "MS15004B package.pdf",
    "scan": "MS15004B legacy scan.pdf",
    "clean": "MS15004B clean copy.pdf",
    "record": "MS15004B validation record.pdf",
    "sheet": "MS15004B 3D model.pdf",
    "parts": "MS15004B parts list.pdf",
    "inspection": "MS15004B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 3, page 1",
   "pictures": {
    "iso": "Models/views/MS15004-2-freecad.png",
    "pair": "Models/views/MS15004-2-pair.png",
    "record": "Models/views/MS15004-2-record.png",
    "front": "Models/views/MS15004-2-front.png",
    "top": "Models/views/MS15004-2-top.png",
    "right": "Models/views/MS15004-2-right.png",
    "cut": "Models/views/MS15004-2-cut.png"
   },
   "shown_part": "MS15004-2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Three envelope solids, one per dash number MS15004-1 to -3 (straight, 45 degree and 90 degree): the 1/4-28 taper thread as a plain cone with its end chamfer, the hexagon, and a plain body and tip that meet A, B, C, D, E and F; the inside of the fittings is not modeled.",
   "not_modeled": [
    "The grease passage, check ball and spring inside each fitting, including the check ball the figures draw at the end of the tip.",
    "The tip design, which note 2 leaves to MS 15000, and the body contours, which Figure 3 leaves to the manufacturer.",
    "Thread form, the 2A class tolerances and the tight fit in a 1/4-28 UNF-3B threaded hole that footnote (a) requires.",
    "The identification notch on the hexagon, which has no size.",
    "The short undimensioned step that Figure 1 draws below the end chamfer of the straight fitting.",
    "Material (nickel-copper alloy) and the bright dipped finish."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 9c253d34e795.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "204 of 218 items agreed. All 12 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (27 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "3 solids in STEP AP242. 28 of 28 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 2 - Cancellation, 18 April 2005.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 draws a short unsized step below the end chamfer of the straight fitting and runs A and D to its bottom, while B and the chamfer end above it and Figures 2 and 3 show no step, so the sheet leaves open whether MS15004-1 has it; the model ends at the chamfer like the other two."
   ]
  },
  {
   "id": "MS15570",
   "slug": "ms15570",
   "title": "Lamp, incandescent, G-6 bulb, single contact, bayonet candelabra base",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS15570 Lamp, incandescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 9,
   "dimensions": 99,
   "dimensions_met": 99,
   "kind": "Military standard",
   "dated": "2 JUN 86",
   "status": "Canceled, 28 April 1993",
   "newest": "Revision F Notice 1 - Cancellation, 28 April 1993",
   "superseding": "A-A-52463",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-155-8720, lamp, incandescent, MS15570-63 (Los Angeles)"
   ],
   "files": {
    "package": "MS15570 package.pdf",
    "scan": "MS15570 legacy scan.pdf",
    "clean": "MS15570 clean copy.pdf",
    "record": "MS15570 validation record.pdf",
    "sheet": "MS15570 3D model.pdf",
    "parts": "MS15570 parts list.pdf",
    "inspection": "MS15570 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS15570-89-freecad.png",
    "pair": "Models/views/MS15570-89-pair.png",
    "record": "Models/views/MS15570-89-record.png",
    "front": "Models/views/MS15570-89-front.png",
    "top": "Models/views/MS15570-89-top.png",
    "right": "Models/views/MS15570-89-right.png",
    "cut": "Models/views/MS15570-89-cut.png"
   },
   "shown_part": "MS15570-89",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the nine MS15570 lamps, which share one outline: a .744 G-6 bulb, a base shell .595 in diameter that runs to the end of the contact at the 1.438 overall length, and two bayonet pins .077 in diameter standing .030 out from the shell, their bulb side .500 from the bulb end of the shell.",
   "not_modeled": [
    "The bevelled insulator and the center contact at the base end, and the end of the shell itself, which the figure draws without dimensions.",
    "The glass wall, the neck of the bulb inside the shell, the filament and its supports, and the inside of the lamp.",
    "The position of the filament: the figure's .75 REF from the pins, and the 13/16 light center length of note 1, which the table ties to MS15570-67 with its circled 1.",
    "The red coating of MS15570-63R and MS15570-303R (note 2) and the ratings the table gives for each dash number (candle power, volts, amps, filament construction and average life), which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 1bbfc481fcd3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "270 of 300 items agreed. All 31 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 1 table (54 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 99 of 99 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision F Notice 1 - Cancellation, 28 April 1993.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The overall length is printed 1.438 MAX* and no note on the sheet explains the asterisk; the solids take 1.438 as a plain maximum.",
    "Model. Note 6 gives every dimension on the sheet for engineering reference only and note 8 holds the lamp to US Army Tank-Automotive Command engineering drawings, so an engineer must take the controlling limits, and the base end the figure leaves undimensioned, from those drawings."
   ]
  },
  {
   "id": "MS15571(SH)",
   "slug": "ms15571-sh",
   "title": "Lamps, incandescent, T-3-1/4, minature bayonet, single contact",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS15571(SH) Lamps, incandescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 9,
   "dimensions": 45,
   "dimensions_met": 45,
   "kind": "Military standard",
   "dated": "3 APR 1978",
   "status": "Canceled, 21 February 1992",
   "newest": "Revision F Notice 3 - Cancellation, 21 February 1992",
   "superseding": "A-A-50588",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-155-7902, lamp, incandescent, MS15571-7 (Los Angeles)"
   ],
   "files": {
    "package": "MS15571(SH) package.pdf",
    "scan": "MS15571(SH) legacy scan.pdf",
    "clean": "MS15571(SH) clean copy.pdf",
    "record": "MS15571(SH) validation record.pdf",
    "sheet": "MS15571(SH) 3D model.pdf",
    "parts": "MS15571(SH) parts list.pdf",
    "inspection": "MS15571(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS15571-7-freecad.png",
    "pair": "Models/views/MS15571-7-pair.png",
    "record": "Models/views/MS15571-7-record.png",
    "front": "Models/views/MS15571-7-front.png",
    "top": "Models/views/MS15571-7-top.png",
    "right": "Models/views/MS15571-7-right.png",
    "cut": "Models/views/MS15571-7-cut.png"
   },
   "shown_part": "MS15571-7",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the 9 MS15571 lamps (-1, -2, -3, -5, -7, -8, -9, -10 and -11): a 13/32 T-3-1/4 bulb with a rounded end, 15/16 from the bulb end to the bayonet pins and 1-3/16 overall (1-1/8 for MS15571-9), on a plain miniature bayonet base with two pins and a single end contact.",
   "not_modeled": [
    "The light center length of each dash number (footnote 1/): the solid has no filament, so each part records it as a parameter, with the distance it leaves to the bulb end at the 15/16 maximum.",
    "The filament, the glass wall, the lead wires and the inside of the lamp.",
    "The true form of the miniature bayonet base, its pins, insulator and contact, and the rounded shoulder of the bulb, which the figure draws without dimensions.",
    "The amperes, volts, finish, hours of life and candlepower of each dash number, which do not change the solid.",
    "MS15571-4 and -6, which the sheet replaces with MS25231-313 and MS25231-1819."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 13ee4e04c496.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "140 of 192 items agreed. All 14 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 1 table (88 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 45 of 45 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision F Notice 3 - Cancellation, 21 February 1992.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet calls for a miniature bayonet base but dimensions none of it and names no procurement specification, so the solids carry an assumed shell, pins and contact; an engineer must take the base dimensions from the miniature bayonet base standard before using the solids for a socket fit.",
    "Model. The 13/32 bulb diameter carries no tolerance and no MAX; an engineer must set its limits before using the solids as a space claim."
   ]
  },
  {
   "id": "MS15572(SH)",
   "slug": "ms15572-sh",
   "title": "Lamps, incandescent G-4-1/2, miniature bayonet, single contact",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS15572(SH) Lamps, incandescent g-4-1-2",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 2,
   "dimensions": 8,
   "dimensions_met": 8,
   "kind": "Military standard",
   "dated": "3 APR 1978",
   "status": "Canceled, 21 February 1992",
   "newest": "Revision D Notice 1 - Cancellation, 21 February 1992",
   "superseding": "A-A-50589",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-012-5588, lamp, incandescent, MS15572-1 (Los Angeles)"
   ],
   "files": {
    "package": "MS15572(SH) package.pdf",
    "scan": "MS15572(SH) legacy scan.pdf",
    "clean": "MS15572(SH) clean copy.pdf",
    "record": "MS15572(SH) validation record.pdf",
    "sheet": "MS15572(SH) 3D model.pdf",
    "parts": "MS15572(SH) parts list.pdf",
    "inspection": "MS15572(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS15572-2-freecad.png",
    "pair": "Models/views/MS15572-2-pair.png",
    "record": "Models/views/MS15572-2-record.png",
    "front": "Models/views/MS15572-2-front.png",
    "top": "Models/views/MS15572-2-top.png",
    "right": "Models/views/MS15572-2-right.png",
    "cut": "Models/views/MS15572-2-cut.png"
   },
   "shown_part": "MS15572-2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the two G-4-1/2 miniature bayonet single contact lamps, MS15572-1 and MS15572-2, which share one shape: a 9/16 spherical bulb, a cylindrical base with two locking pins whose tops stand 9/16 from the bulb center (note 1/), and a cone-shaped contact, 1-1/16 long overall.",
   "not_modeled": [
    "Design volts, amperes, approximate candlepower, hours life and the clear or red finish; MS15572-1 and MS15572-2 differ only in these and in industry number, so they share one solid shape.",
    "The filament, lead wires, glass wall, basing cement and the contact's insulator and solder, which the sheet does not show in section or dimension.",
    "The rounded corner at the end of the base and the rounded end of the contact, which the figure draws without dimensions."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 1575feb7c4f2.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "65 of 109 items agreed. All 10 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "1 page of searchable text, 1 table (14 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 8 of 8 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision D Notice 1 - Cancellation, 21 February 1992.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The figure draws 9/16 between lines tangent to the top and bottom of the bulb, the diameter G-4-1/2 also gives, but note 1/ defines it as the distance from the center of the light source to the top of the loose pins, and the sheet does not locate the light source; the solids meet both readings by taking the light source at the bulb center, which an engineer must confirm.",
    "Model. The sheet gives no dimensions for the miniature bayonet base, its locking pins or the contact, so the solids scale a .35 base diameter, .03 pins standing .04 high and a .105 contact from the figure; an engineer must take these from the miniature bayonet base standard, which the sheet does not cite, before the solids are used to check fit in a socket."
   ]
  },
  {
   "id": "MS16524",
   "slug": "ms16524",
   "title": "Lamp, incandescent, PAR-36, screw terminal",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS16524 Lamp, incandescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 1,
   "dimensions": 5,
   "dimensions_met": 5,
   "kind": "Military standard",
   "dated": "22 April 1963",
   "status": "Canceled, 26 February 1992",
   "newest": "Revision D Notice 1 - Cancellation, 26 February 1992",
   "superseding": "A-A-50595",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-866-4143, lamp, incandescent, MS16524-2 (Los Angeles)"
   ],
   "files": {
    "package": "MS16524 package.pdf",
    "scan": "MS16524 legacy scan.pdf",
    "clean": "MS16524 clean copy.pdf",
    "record": "MS16524 validation record.pdf",
    "sheet": "MS16524 3D model.pdf",
    "parts": "MS16524 parts list.pdf",
    "inspection": "MS16524 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS16524-2-freecad.png",
    "pair": "Models/views/MS16524-2-pair.png",
    "record": "Models/views/MS16524-2-record.png",
    "front": "Models/views/MS16524-2-front.png",
    "top": "Models/views/MS16524-2-top.png",
    "right": "Models/views/MS16524-2-right.png",
    "cut": "Models/views/MS16524-2-cut.png"
   },
   "shown_part": "MS16524-2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solid of MS16524-2, the one part number on the sheet: a cylinder at the 4.360/4.460 rim diameter and the 2-3/4 maximum overall length that encloses the PAR-36 lamp as the figure draws it, lens face to the end of the screw terminals.",
   "not_modeled": [
    "The domed lens, the width and position of the rim band, and the reflector bowl and its neck, which the figure draws without dimensions.",
    "The two screw terminals of the BASE TERMINAL detail, with their bosses, bent contact straps and binding screws, which carry no dimensions.",
    "The filament, the glass walls and the inside of the sealed beam.",
    "The values the table gives (design volts, amps, beam candlepower, filament, beam spread, hours of life, industry number, finish and use), which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 7af3f5c109ee.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "168 of 180 items agreed. All 13 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 1 table (11 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "1 solid in STEP AP242. 5 of 5 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision D Notice 1 - Cancellation, 26 February 1992.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no width or position for the rim band and no terminal spacing, binding screw size or strap dimensions in the BASE TERMINAL detail, and it names no procurement specification, so the lantern seat and wiring interface must be taken from the industry 4546 lamp, not from this envelope."
   ]
  },
  {
   "id": "MS16535J",
   "slug": "ms16535j",
   "title": "Rivet - tubular, oval head",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS16535J Rivet - tubular, oval head",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 100,
   "dimensions": 900,
   "dimensions_met": 900,
   "kind": "Military specification sheet",
   "dated": "26 MAY 92",
   "status": "Canceled, 20 March 2000",
   "newest": "Revision J Notice 1 - Cancellation, 20 March 2000",
   "superseding": "NASM16535",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5320-00-242-0322, rivet, tubular, MS16535-164 (Los Angeles)"
   ],
   "files": {
    "package": "MS16535J package.pdf",
    "scan": "MS16535J legacy scan.pdf",
    "clean": "MS16535J clean copy.pdf",
    "record": "MS16535J validation record.pdf",
    "sheet": "MS16535J 3D model.pdf",
    "parts": "MS16535J parts list.pdf",
    "inspection": "MS16535J inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS16535-120-freecad.png",
    "pair": "Models/views/MS16535-120-pair.png",
    "record": "Models/views/MS16535-120-record.png",
    "front": "Models/views/MS16535-120-front.png",
    "top": "Models/views/MS16535-120-top.png",
    "right": "Models/views/MS16535-120-right.png",
    "cut": "Models/views/MS16535-120-cut.png"
   },
   "shown_part": "MS16535-120",
   "application": "FreeCAD 1.1.4",
   "modeled": "Oval-head tubular rivets with a straight hole, one solid for each of the 100 nominal diameter and length combinations in Table II; each solid stands for every material dash number listed at that diameter and length.",
   "not_modeled": [
    "The 504 dash numbers differ only by material and finish at 100 geometries; one solid per geometry is named by the first dash number in Table II and lists the others.",
    "The optional tapered hole (\u00d8E1, \u00d8E2, G) is not modeled; the solids carry the straight hole D to depth C.",
    "Clinch allowance (reference only), materials, protective coatings, double shear strength and the ANSI B18.7 length tolerance are not modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 0ed6d2de2bfc.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,770 of 1,784 items agreed. All 14 differences were settled against the page image. A second pass settled 7 from a second printing in the document. 2 marks outside the technical content are kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "916 checks on size series and limits. 57 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 4 tables (1,336 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "100 solids in STEP AP242. 900 of 900 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision J Notice 1 - Cancellation, 20 March 2000.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table II, nickel copper .188 column, length .469 prints dash number 268 between 367 at .438 and 369 at .500. The column otherwise runs 359 to 379 in order, and 268 is already the nickel copper .146 number at .312, so the printed 268 duplicates another part number where 368 belongs.",
    "Model. Table I gives the .146 rivet a straight hole depth C of .126, but Table II lists .146 rivets at length .125 (MS16535-211, -228, -245, -262, -279 and -478), so the hole is deeper than the shank is long and runs into the head. The engineer must decide what hole depth applies to these parts.",
    "Model. Table I gives the .123 rivet a straight hole depth C of .094, the same as the shortest .123 length in Table II (MS16535-111, -131, -151, -171, -191 and -458), so the hole reaches the underside of the head with no solid shank left. The engineer must decide whether a shallower hole applies at this length."
   ]
  },
  {
   "id": "MS16556",
   "slug": "ms16556",
   "title": "Pin, straight, headless (dowel) (.001 over nominal size)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS16556 Pin, straight",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 124,
   "dimensions": 868,
   "dimensions_met": 868,
   "kind": "Military standard",
   "dated": "8 SEP 1976",
   "status": "Canceled, 30 November 1998",
   "newest": "Revision B Notice 2 - Cancellation, 30 November 1998",
   "superseding": "NASM16556",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5315-01-492-6619, pin, straight, headless, MS16556-58 (Los Angeles)"
   ],
   "files": {
    "package": "MS16556 package.pdf",
    "scan": "MS16556 legacy scan.pdf",
    "clean": "MS16556 clean copy.pdf",
    "record": "MS16556 validation record.pdf",
    "sheet": "MS16556 3D model.pdf",
    "parts": "MS16556 parts list.pdf",
    "inspection": "MS16556 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS16556-49-freecad.png",
    "pair": "Models/views/MS16556-49-pair.png",
    "record": "Models/views/MS16556-49-record.png",
    "front": "Models/views/MS16556-49-front.png",
    "top": "Models/views/MS16556-49-top.png",
    "right": "Models/views/MS16556-49-right.png",
    "cut": "Models/views/MS16556-49-cut.png"
   },
   "shown_part": "MS16556-49",
   "application": "FreeCAD 1.1.4",
   "modeled": "124 solid straight headless dowel pins, one for every nominal size and length in Table II, each with a crowned end of height and radius C and a tapered point to diameter B.",
   "not_modeled": [
    "Tables III, IV and V repeat the Table II sizes and lengths for phosphate coated, corrosion-resisting and cadmium plated pins (dash numbers 3xx, 6xx and 8xx); their geometry is identical and each model lists the equivalent dash numbers instead of a separate solid.",
    "The alternate end with a 25\u00b0\u00b15\u00b0 chamfer of length C is not modeled; every solid uses the crowned end.",
    "Material, hardness, case depth, coatings, surface roughness and double shear strength are not modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 8e4b0c1737ae.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,166 of 2,190 items agreed. All 22 differences were settled against the page image. A second pass settled 1 from a closer look at the page, 1 from a second printing in the document.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1,233 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 5 tables (1,735 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "124 solids in STEP AP242. 868 of 868 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 2 - Cancellation, 30 November 1998. ASSIST also holds Revision B Amendment 1 (20 October 1997). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS16995H",
   "slug": "ms16995h",
   "title": "Screw, cap, socket head- hexagon, corrosion resistant steel, UNC-3A",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS16995H Screw, cap",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 82,
   "dimensions": 984,
   "dimensions_met": 984,
   "kind": "Military specification sheet",
   "dated": "25 April 1997",
   "status": "Canceled, 30 June 1998",
   "newest": "Revision H Notice 1 - Cancellation, 30 June 1998",
   "superseding": "NASM16995",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5305-00-165-8087, screw, cap, socket head, MS16995-1B (Los Angeles)"
   ],
   "files": {
    "package": "MS16995H package.pdf",
    "scan": "MS16995H legacy scan.pdf",
    "clean": "MS16995H clean copy.pdf",
    "record": "MS16995H validation record.pdf",
    "sheet": "MS16995H 3D model.pdf",
    "parts": "MS16995H parts list.pdf",
    "inspection": "MS16995H inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS16995-52-freecad.png",
    "pair": "Models/views/MS16995-52-pair.png",
    "record": "Models/views/MS16995-52-record.png",
    "front": "Models/views/MS16995-52-front.png",
    "top": "Models/views/MS16995-52-top.png",
    "right": "Models/views/MS16995-52-right.png",
    "cut": "Models/views/MS16995-52-cut.png"
   },
   "shown_part": "MS16995-52",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid socket head cap screws for every dash number MS16995-1 to -115 in Table I (82 parts, sizes #2 to 5/8), with head, top chamfer, head edge chamfer, hexagon socket with a 120 degree bottom, under-head fillet and a plain shank.",
   "not_modeled": [
    "Screw threads (UNC-3A per FED-STD-H28/2) and the basic thread length M (Ref): the shank is one plain cylinder at the body diameter D.",
    "Grip length and body length for the dash numbers below the dashed line, and full-form threads to within two threads of the head for those above it (Req 5).",
    "Optional head knurling (Req 6), manufacturer and material identification marking (Req 7 and 8), and the thread point, which the document does not dimension.",
    "Material, finish, tensile strength, yield strength, hardness and magnetic permeability (Req 1 to 4)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 ee3f29b78dde.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,101 of 1,169 items agreed. All 74 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "314 checks on size series and limits. 14 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 10 tables (784 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "82 solids in STEP AP242. 984 of 984 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision H Notice 1 - Cancellation, 30 June 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. MS16995-70 (5/16 x 2.000) sits below the dashed line in Table I, but its grip length and body length cells are blank, so its thread length is not defined."
   ]
  },
  {
   "id": "MS17828J",
   "slug": "ms17828j",
   "title": "Nut, self-locking, hexagon, regular-height, (non-metallic insert) 250\u00b0F, nickel-copper alloy",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS17828J Nut, self-locking",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 3,
   "solids": 37,
   "dimensions": 333,
   "dimensions_met": 331,
   "kind": "Military specification sheet",
   "dated": "19 JULY 1989",
   "status": "Canceled, 24 May 2000",
   "newest": "Revision J Notice 2 - Cancellation, 24 May 2000",
   "superseding": "NASM17828",
   "preparing_activity": "DLA Troop Support - Industrial Hardware Items of Supply Stdz. (S/S by CC/CQ",
   "stock_numbers": 5,
   "by_class": {
    "Los Angeles": 2,
    "Seawolf": 3
   },
   "stock_examples": [
    "5310-00-006-2250, nut, self-locking, hexagon, MS17828-12C (Los Angeles)",
    "5310-00-245-3504, nut, self-locking, hexagon, MS17828 (Los Angeles)",
    "5310-01-492-5577, nut, self-locking, hexagon, MS17828-24F (Seawolf)",
    "5310-01-496-7136, nut, self-locking, hexagon, MS17828J-08C (Seawolf)"
   ],
   "files": {
    "package": "MS17828J package.pdf",
    "scan": "MS17828J legacy scan.pdf",
    "clean": "MS17828J clean copy.pdf",
    "record": "MS17828J validation record.pdf",
    "sheet": "MS17828J 3D model.pdf",
    "parts": "MS17828J parts list.pdf",
    "inspection": "MS17828J inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS17828-10F-freecad.png",
    "pair": "Models/views/MS17828-10F-pair.png",
    "record": "Models/views/MS17828-10F-record.png",
    "front": "Models/views/MS17828-10F-front.png",
    "top": "Models/views/MS17828-10F-top.png",
    "right": "Models/views/MS17828-10F-right.png",
    "cut": "Models/views/MS17828-10F-cut.png"
   },
   "shown_part": "MS17828-10F",
   "application": "FreeCAD 1.1.4",
   "modeled": "37 self-locking hexagon nuts, one per MS17828 dash number from -04C to -40C, each a hexagon with 30\u00b0 corner chamfers on both ends, a round insert collar to the overall height A, a plain bore at the thread major diameter and a 90\u00b0 countersink to diameter D on the bearing face.",
   "not_modeled": [
    "Internal threads (UNC/UNF-3B) are modeled as a plain bore at the basic major diameter.",
    "The nonmetallic locking insert (ASTM D4066) is not modeled; the collar is an envelope of the optional top shape.",
    "NICU marking, surface texture, material, the strength and torque values of TABLE II and the sampling plan of TABLE III are not geometry and are not modeled.",
    "The optional washer face or radius relief at the bearing face is not modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 bbd4af21de8e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "999 of 1,095 items agreed. 25 differences went to a third reader. A second pass settled 14 from the same value on another sheet of the series, 1 from a second printing in the document. 1 reading remains open. 1 value that the scan prints in a doubtful form is listed for the engineer.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "444 checks on size series and limits. 12 breaks checked against the scan: all are as printed. 46 values are also printed on 3 other sheets of the series: 44 match, 2 differ as printed. A later review settled 4 printed values from the column's units and limits.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 4 tables (727 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "37 solids in STEP AP242. 331 of 333 stated dimensions measure within limits; 2 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision J Notice 2 - Cancellation, 24 May 2000.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, row -32C, column D: the mark between 2 and 065 prints as a comma or a point. The value is 2.065 either way.",
    "Open reading. Table I, row -40C, D: read as 2.378, could be 2.578.",
    "Printed value to confirm. Table I on page 1 prints A minimum .219 for -08C (8-32) and .208 for the larger -3C and -3F (No. 10), while both print A maximum .281, and F minimum drops the same way (.091 to .085). A smaller nut with a higher minimum height than the next size up breaks the column; confirm the -08C values.",
    "Printed value to confirm. Table I on page 1 prints F minimum .091 for -08C (8-32) and .085 for the larger -3C and -3F (No. 10), and A minimum drops the same way (.219 to .208). A smaller nut with a longer minimum flat than the next size up breaks the column; confirm the -08C values.",
    "Printed value to confirm. Table II on page 2 prints axial strength 110,300 lb for -22C and 115,200 lb for -22F, both below the smaller -20C (115,700) and -20F (119,800), while wrench torque, locking torque and breakaway torque all rise from -20 to -22. Confirm the -22 axial strengths.",
    "Differs within the series. Bearing surface squareness, maximum, 04: .005 here; MS21083 prints .004. MS17828 prints .005 for -04C on page 1; MS21083 prints .004 in one merged cell covering D02, D04 and D06 on page 1. Both are clear (crops ms17828-page 1-sq-04C-8x.png, ms21083-page 1-sq-02-8.png).",
    "Differs within the series. Bearing surface squareness, maximum, 06: .006 here; MS21083 prints .004. MS17828 prints .006 for -06C on page 1; MS21083 prints .004 in the merged cell covering D02 to D06 on page 1. Both are clear (crops ms17828-page 1-rows-04-06.png, ms21083-page 1-sq-02-8.png).",
    "Model. Table I prints the -9F thread as 9/16-18UNC-3B, but an 18-pitch 9/16 thread is the unified fine series and every other F dash number is printed UNF. The engineer must decide whether -9F is 9/16-18UNF-3B; the nut geometry is the same either way."
   ]
  },
  {
   "id": "MS18229C(SH) w/AMENDMENT 2",
   "slug": "ms18229c-sh-w-amendment-2",
   "title": "Plug for O-ring gasket",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS18229C(SH) w_AMENDMENT 2 Plug for o-ring gasket",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 364,
   "dimensions": 6656,
   "dimensions_met": 6648,
   "kind": "Military specification sheet",
   "dated": "17 July 2024",
   "status": "Active, 17 July 2024",
   "newest": "Revision C Amendment 2 (all previous amendments incorporated), 17 July 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 6,
   "by_class": {
    "Los Angeles": 4,
    "Seawolf": 2
   },
   "stock_examples": [
    "5365-01-485-8268, plug, machine thread, MS18229 (Los Angeles)",
    "5365-01-486-6452, plug, machine thread, MS18229 (Los Angeles)",
    "5365-01-491-0806, plug, machine thread, MS18229 (Los Angeles)",
    "5365-01-504-6225, plug, machine thread, MS18229 (Los Angeles)"
   ],
   "files": {
    "package": "MS18229C(SH) w_AMENDMENT 2 package.pdf",
    "scan": "MS18229C(SH) w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MS18229C(SH) w_AMENDMENT 2 clean copy.pdf",
    "record": "MS18229C(SH) w_AMENDMENT 2 validation record.pdf",
    "sheet": "MS18229C(SH) w_AMENDMENT 2 3D model.pdf",
    "parts": "MS18229C(SH) w_AMENDMENT 2 parts list.pdf",
    "inspection": "MS18229C(SH) w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/MS18229-10CNLY-freecad.png",
    "pair": "Models/views/MS18229-10CNLY-pair.png",
    "record": "Models/views/MS18229-10CNLY-record.png",
    "front": "Models/views/MS18229-10CNLY-front.png",
    "top": "Models/views/MS18229-10CNLY-top.png",
    "right": "Models/views/MS18229-10CNLY-right.png",
    "cut": "Models/views/MS18229-10CNLY-cut.png"
   },
   "shown_part": "MS18229-10CNLY",
   "application": "FreeCAD 1.1.4",
   "modeled": "364 plugs, one per MS18229 part number: dash numbers 2 to 32 with each of the seven note 1 material designators, with and without the L lockwire hole and the Y lanyard retainer post. Each solid is the figure 1 plug: T thread with its 30\u00b0 end chamfer, 45\u00b0 shoulder, D relief F long with the R1/32 fillet, hex A across flats from C to B with the 35\u00b0 inner and 15\u00b0 to 30\u00b0 outer face chamfers from diameter E, the note 2 corner notches on non-ferrous designators, the .062 hole at G for L parts and the 1/4 post for Y parts.",
   "not_modeled": [
    "Thread form, pitch and class 2A limits of the T thread (UNF-2A); the thread is a plain cylinder at the basic major diameter.",
    "The material marking on the hex head (note 1, MIL-STD-792) and the materials themselves; the designator does not change the shape except that the non-ferrous designators add the note 2 notches.",
    "The lanyard drawn on the retainer post and the edge rounding drawn on the post head, which carry no dimensions.",
    "The AS568 O-ring listed for each dash number, which is a separate part."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 e9e61a88e07b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "503 of 540 items agreed. All 29 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "120 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (159 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "364 solids in STEP AP242. 6,648 of 6,656 stated dimensions measure within limits; 8 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Amendment 2 (all previous amendments incorporated), 17 July 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. On dash 2 the .062 lockwire hole, with its axis at the .125 minimum from one corner of the 7/16 hex, cuts the two neighboring corners .059 deep in the plane where figure 1 draws the notches, against the .030 to .045 notch depth of note 2, so the CN, NC, TB and TI parts with L cannot meet both.",
    "Model. On dash 3 the same hole also breaks through the two neighboring corners, and on dash 4 and 5 it breaks out of the flats inside their notches; the sheet does not say how the hole is placed on these small hexes."
   ]
  },
  {
   "id": "MS19070C w/AMENDMENT 1",
   "slug": "ms19070c-w-amendment-1",
   "title": "Washer, key retaining, ball and roller bearing, regular series",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS19070C w_AMENDMENT 1 Washer, key retaining",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 198,
   "dimensions": 2772,
   "dimensions_met": 2772,
   "kind": "Detail specification sheet",
   "dated": "07 August 2026",
   "status": "Active, 7 August 2026",
   "newest": "Revision C Amendment 1 (amendment incorporated), 7 August 2026",
   "superseding": "",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5310-00-186-0979, washer, key, MS19070-201 (Los Angeles)"
   ],
   "files": {
    "package": "MS19070C w_AMENDMENT 1 package.pdf",
    "scan": "MS19070C w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MS19070C w_AMENDMENT 1 clean copy.pdf",
    "record": "MS19070C w_AMENDMENT 1 validation record.pdf",
    "sheet": "MS19070C w_AMENDMENT 1 3D model.pdf",
    "parts": "MS19070C w_AMENDMENT 1 parts list.pdf",
    "inspection": "MS19070C w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS19070-151-freecad.png",
    "pair": "Models/views/MS19070-151-pair.png",
    "record": "Models/views/MS19070-151-record.png",
    "front": "Models/views/MS19070-151-front.png",
    "top": "Models/views/MS19070-151-top.png",
    "right": "Models/views/MS19070-151-right.png",
    "cut": "Models/views/MS19070-151-cut.png"
   },
   "shown_part": "MS19070-151",
   "application": "FreeCAD 1.1.4",
   "modeled": "198 key retaining washers, one per part number (dash numbers 00 to 40 of Table I, each in material numbers 1 to 6 of note 5): a flat ring of thickness Q from bore R to diameter E, a key of width S bent 90\u00b0 at radius r that projects V beyond the face, and the listed number of tangs of width T bent 45\u00b0 the other way to the diameter over tangs B.",
   "not_modeled": [
    "Material, temper (note 2), protective coating and passivation (note 3) do not change the shape; the six material numbers of each dash number share one geometry.",
    "The bend radius of the tangs is not given; each tang bend is modeled with a sharp inside corner and an outside corner of radius Q.",
    "Dash 065 is modeled although Table I marks it inactive for new design after 1987."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 5049729b8da0.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,123 of 1,189 items agreed. All 16 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "672 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (594 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "198 solids in STEP AP242. 2,772 of 2,772 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Amendment 1 (amendment incorporated), 7 August 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table I prints a superscript 1 after R max 1.817 for dash 09 and the sheet carries no footnote 1; the model uses 1.817, and the engineer must confirm whether a note was meant to modify that limit."
   ]
  },
  {
   "id": "MS20426L",
   "slug": "ms20426l",
   "title": "Rivet, solid, countersunk 100\u00b0, precision head, aluminum and titanium columbium alloy",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS20426L Rivet, solid",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 5,
   "solids": 138,
   "dimensions": 966,
   "dimensions_met": 966,
   "kind": "Military specification sheet",
   "dated": "14 SEP 93",
   "status": "Canceled, 18 August 1998",
   "newest": "Revision L Notice 1 - Cancellation, 18 August 1998",
   "superseding": "NASM20426",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5320-00-117-6959, rivet, solid, MS20426AD4-18 (Los Angeles)"
   ],
   "files": {
    "package": "MS20426L package.pdf",
    "scan": "MS20426L legacy scan.pdf",
    "clean": "MS20426L clean copy.pdf",
    "record": "MS20426L validation record.pdf",
    "sheet": "MS20426L 3D model.pdf",
    "parts": "MS20426L parts list.pdf",
    "inspection": "MS20426L inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS20426AD6-12-freecad.png",
    "pair": "Models/views/MS20426AD6-12-pair.png",
    "record": "Models/views/MS20426AD6-12-record.png",
    "front": "Models/views/MS20426AD6-12-front.png",
    "top": "Models/views/MS20426AD6-12-top.png",
    "right": "Models/views/MS20426AD6-12-right.png",
    "cut": "Models/views/MS20426AD6-12-cut.png"
   },
   "shown_part": "MS20426AD6-12",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid 100 degree countersunk rivets, one for each of the 138 diameter and length combinations the dash-number tables list, named with the 2117-T4 (AD) code: conical head with a cylindrical land, straight shank and plain end.",
   "not_modeled": [
    "The other eight material codes (A, B, D, DD, E, K, T, J) share the AD geometry at each diameter and length and are not built as separate solids.",
    "Material identification marks (raised cross, dimple, teat, double dash, indented ring, square, triangle, diamond) and the manufacturer's identification on the head.",
    "The optional end radius T and 20 degree end chamfer S; the plain end the document permits is modeled.",
    "C, the approximate shank material needed to form the driven head, which is an installation allowance rather than a feature.",
    "The -5 option for an additional 1/32 inch of length, the .001 inch permissible shank swell near the head, head concentricity and head-cocking tolerances, and finishes."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, all scanned. SHA-256 8825a40c02a6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,996 of 2,113 items agreed. 99 differences went to a third reader. A second pass settled 3 from a second printing in the document. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "169 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 10 tables (1,453 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "138 solids in STEP AP242. 966 of 966 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision L Notice 1 - Cancellation, 18 August 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table I, row 7, column 1: read as .476, could be .478."
   ]
  },
  {
   "id": "MS21027T",
   "slug": "ms21027t",
   "title": "Switch, toggle, positive break, lever lock, miniature toggle sealed, solder lug, double pole, .469 mounting bushing",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS21027T Switch, toggle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 56,
   "dimensions": 1040,
   "dimensions_met": 1040,
   "kind": "Detail specification sheet",
   "dated": "2 November 2022",
   "status": "Active, 2 November 2022",
   "newest": "Revision T, 2 November 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5930-01-031-7149, switch, toggle, MS21027-K381 (Los Angeles, Seawolf)"
   ],
   "files": {
    "package": "MS21027T package.pdf",
    "scan": "MS21027T legacy scan.pdf",
    "clean": "MS21027T clean copy.pdf",
    "record": "MS21027T validation record.pdf",
    "sheet": "MS21027T 3D model.pdf",
    "parts": "MS21027T parts list.pdf",
    "inspection": "MS21027T inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS21027-K881-freecad.png",
    "pair": "Models/views/MS21027-K881-pair.png",
    "record": "Models/views/MS21027-K881-record.png",
    "front": "Models/views/MS21027-K881-front.png",
    "top": "Models/views/MS21027-K881-top.png",
    "right": "Models/views/MS21027-K881-right.png",
    "cut": "Models/views/MS21027-K881-cut.png"
   },
   "shown_part": "MS21027-K881",
   "application": "FreeCAD 1.1.4",
   "modeled": "56 envelope solids, one for each PIN in Table I (every locking combination letter on every 700, 800, 200 and 300 series dash number, inactive -771, -781, -271 and -281 included): case, keyed .469 bushing, lever locked in the center position, and the solder lug terminals each dash number carries.",
   "not_modeled": [
    "The lever's thrown positions, 26\u00b0 \u00b18\u00b0 between them and 13\u00b0 \u00b14\u00b0 from the center line; every solid shows the lever locked on the axis.",
    "The lever lock collar and the locking and momentary configurations A to L, which the figures show as schematics only.",
    "The thread form, the .438 \u00b1.025 thread length and the .030 min clearance when mounting; the bushing is one plain cylinder.",
    "The two .469-32 UNS-2B hex nuts, the .469 locking ring and the .469 lockwasher, which MIL-DTL-8834 defines.",
    "The barrier and terminal board on the back of the case and the terminal marking, which the sheet leaves to the maker.",
    "The internal mechanism, the bushing bore, the toggle seal and the case corner radii.",
    "Ratings, circuits, seal, shock, altitude, terminal strength, the .0640 lb maximum weight and the 4 \u00b11 lb unlocking force."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 1 scanned. SHA-256 7aecee219e9a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "585 of 611 items agreed. All 12 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "92 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 1 table (169 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "56 solids in STEP AP242. 1,040 of 1,040 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision T, 2 November 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS21083H",
   "slug": "ms21083h",
   "title": "Nut, self-locking, hexagon non-metallic insert, low height, 250\u00b0F",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS21083H Nut, self-locking",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 3,
   "solids": 76,
   "dimensions": 608,
   "dimensions_met": 608,
   "kind": "Military specification sheet",
   "dated": "28 SEP 93",
   "status": "Canceled, 19 July 2000",
   "newest": "Revision H Notice 1 - Cancellation, 19 July 2000",
   "superseding": "NASM21083",
   "preparing_activity": "DLA Troop Support - Industrial Hardware Items of Supply Stdz. (S/S by CC/CQ",
   "stock_numbers": 3,
   "by_class": {
    "Los Angeles": 3
   },
   "stock_examples": [
    "5310-00-922-9081, nut, self-locking, hexagon, MS21083D4 (Los Angeles)",
    "5310-00-923-4219, nut, self-locking, hexagon, MS21083C12 (Los Angeles)",
    "5310-00-926-5832, nut, self-locking, hexagon, MS21083B6 (Los Angeles)"
   ],
   "files": {
    "package": "MS21083H package.pdf",
    "scan": "MS21083H legacy scan.pdf",
    "clean": "MS21083H clean copy.pdf",
    "record": "MS21083H validation record.pdf",
    "sheet": "MS21083H 3D model.pdf",
    "parts": "MS21083H parts list.pdf",
    "inspection": "MS21083H inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS21083N8-freecad.png",
    "pair": "Models/views/MS21083N8-pair.png",
    "record": "Models/views/MS21083N8-record.png",
    "front": "Models/views/MS21083N8-front.png",
    "top": "Models/views/MS21083N8-top.png",
    "right": "Models/views/MS21083N8-right.png",
    "cut": "Models/views/MS21083N8-cut.png"
   },
   "shown_part": "MS21083N8",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MS21083 hex self-locking nut for all 19 thread sizes in each of the four material dash-number series (76 part numbers): hexagon at the across-flats limit midpoint, overall height A, 30 degree washer-face chamfer on both ends, 90 degree countersink to diameter D at the bearing face, and a plain bore at the thread major diameter.",
   "not_modeled": [
    "Thread form (MIL-S-8879 UNJ, class 3B) and the non-metallic locking insert and its retaining collar; the nut is one solid envelope.",
    "Bearing surface squareness, Table II tensile strength and weight, material, plating, lubricant, magnetic permeability, vibration life, surface texture and identification marking.",
    "The optional top shape: the solid carries the full hexagon over the whole height A, so F equals A."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 717c79364f56.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,583 of 1,705 items agreed. 124 differences went to a third reader. A second pass settled 11 from the same value on another sheet of the series. 3 readings remain open.",
     "result": "3 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "473 checks on size series and limits. 52 breaks checked against the scan: all are as printed. 18 values are also printed on 3 other sheets of the series: 16 match, 2 differ as printed. A later review settled 20 printed values from the column's units and limits.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 3 tables (839 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "76 solids in STEP AP242. 608 of 608 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision H Notice 1 - Cancellation, 19 July 2000.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table I, row D7, column D: read as 458, could be 456.",
    "Open reading. Page 1, 7075 temper: read as 7075-T6 OR T651, could be 7075-T6 OR T851.",
    "Open reading. Table I, row D12, column (b) \u2300B / MAX: read as 1.084, could be 1.064.",
    "Printed value to confirm. Table I, A maximum, page 1: read as printed the column falls from 328 (D8) to .375 (D9) because the D8 cell lost its decimal point; it is among the cells listed for this column, read in the model as .328.",
    "Printed value to confirm. Table I, A maximum, page 1: read as printed the column falls from 766 (D20) to .828 (D22) because the D20 cell lost its decimal point; it is among the cells listed for this column, read in the model as .766.",
    "Printed value to confirm. Table I, A minimum, page 1: read as printed the column falls from 376 (D10) to .391 (D12) because the D10 cell lost its decimal point; it is among the cells listed for this column, read in the model as .376.",
    "Printed value to confirm. Table I, A minimum, page 1: read as printed the column falls from 454 (D14) to .516 (D16) because the D14 cell lost its decimal point; it is among the cells listed for this column, read in the model as .454.",
    "Printed value to confirm. Table I, B maximum (across flats), page 1: read as printed the column falls from 752 (D8) to .877 (D9) because the D8 cell lost its decimal point; it is among the cells listed for this column, read in the model as .752.",
    "Printed value to confirm. Table I, B minimum (across flats), page 1: read as printed the column falls from 553 (D6) to .679 (D7) because the D6 cell lost its decimal point; it is among the cells listed for this column, read in the model as .553.",
    "Printed value to confirm. Table I, B minimum (across flats), page 1: read as printed the column falls from 741 (D8) to .865 (D9) because the D8 cell lost its decimal point; it is among the cells listed for this column, read in the model as .741.",
    "Printed value to confirm. Table I, C minimum (across corners), page 1: read as printed the column falls from 622 (D6) to .766 (D7) because the D6 cell lost its decimal point; it is among the cells listed for this column, read in the model as .622.",
    "Printed value to confirm. Table I, D (countersink diameter), page 1: read as printed the column falls from 458 (D7) to .531 (D8) because the D7 cell lost its decimal point; it is among the cells listed for this column, read in the model as .458.",
    "Printed value to confirm. Table I, D (countersink diameter), page 1: read as printed the column falls from 787 (D12) to .913 (D14) because the D12 cell lost its decimal point; it is among the cells listed for this column, read in the model as .787.",
    "Printed value to confirm. Table I, F minimum, page 1: the 1 3/8 size (D22) prints 281 (that is .281, or .261, as the middle digit is blurred) between 328 for the 1 1/4 size (D20) and 328 for the 1 1/2 size (D24), all three with the point lost. Every other step of the column rises or holds, so the printed D22 value looks wrong and the engineer should confirm the wrenching flat height for this size.",
    "Printed value to confirm. Table II, row 5000-20UNJF-3B (the -8 size), page 2: CRES tensile strength prints 7,400 lb against 10,440 lb for steel. Note 3 rates CRES nuts at 70 ksi, the same as steel, for sizes -04 through -8, and CRES equals steel in every smaller row, so 7,400 contradicts the note; it follows the lower CRES ratio of the -9 and larger rows. The engineer must decide whether the value or the note's size range governs.",
    "Differs within the series. Bearing surface squareness, maximum, 04: .004 here; MS17828 prints .005. MS17828 prints .005 for -04C on page 1; MS21083 prints .004 in one merged cell covering D02, D04 and D06 on page 1. Both are clear (crops ms17828-page 1-sq-04C-8x.png, ms21083-page 1-sq-02-8.png).",
    "Differs within the series. Bearing surface squareness, maximum, 06: .004 here; MS17828 prints .006. MS17828 prints .006 for -06C on page 1; MS21083 prints .004 in the merged cell covering D02 to D06 on page 1. Both are clear (crops ms17828-page 1-rows-04-06.png, ms21083-page 1-sq-02-8.png)."
   ]
  },
  {
   "id": "MS21209",
   "slug": "ms21209",
   "title": "Insert, screw thread, coarse and fine, screw locking helical coil CRES",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS21209 Insert, screw thread",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 5,
   "solids": 205,
   "dimensions": 2170,
   "dimensions_met": 2170,
   "kind": "Military standard",
   "dated": "21 Feb 78",
   "status": "Canceled, 12 June 1998",
   "newest": "Revision E Notice 1 - Cancellation, 12 June 1998",
   "superseding": "NASM21209",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 3,
   "by_class": {
    "Los Angeles": 2,
    "Seawolf": 1
   },
   "stock_examples": [
    "5325-00-215-0249, insert, screw thread, MS21209C0825 (Los Angeles)",
    "5325-00-218-1518, insert, screw thread, MS21209F5-10 (Los Angeles)",
    "5325-01-503-9962, insert, screw thread, MS21209C1015L (Seawolf)"
   ],
   "files": {
    "package": "MS21209 package.pdf",
    "scan": "MS21209 legacy scan.pdf",
    "clean": "MS21209 clean copy.pdf",
    "record": "MS21209 validation record.pdf",
    "sheet": "MS21209 3D model.pdf",
    "parts": "MS21209 parts list.pdf",
    "inspection": "MS21209 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS21209C2220-freecad.png",
    "pair": "Models/views/MS21209C2220-pair.png",
    "record": "Models/views/MS21209C2220-record.png",
    "front": "Models/views/MS21209C2220-front.png",
    "top": "Models/views/MS21209C2220-top.png",
    "right": "Models/views/MS21209C2220-right.png",
    "cut": "Models/views/MS21209C2220-cut.png"
   },
   "shown_part": "MS21209C2220",
   "application": "FreeCAD 1.1.4",
   "modeled": "Free-state helical coil inserts for every MS21209 coarse and fine thread dash number: the 60 degree diamond wire section of Sect A-A wound at the thread pitch to the free outer diameter F for N free coils, with the reduced first coil and the drive tang across the diameter.",
   "not_modeled": [
    "The polygonal screw-locking grip coil (K sides, L grip coils, M coils from the end) and the optional staggered grip (P sides, S coils); every coil is round.",
    "The tang break-off notch and its angle H from the tang.",
    "The minimum metal crest is a radius R min tangent to both flanks, with T min between its tangent points (T min is R min times the square root of 3 in the tables); the solids' wire section has sharp corners and flat crests at the middle of B.",
    "The driving pin dimensions Y and Z; only the tang width against the X slot is checked.",
    "The installed state: nominal length (REF) and weight are not checked, and the solids are the free coils.",
    "Color identification, dry film lubricant (L) and cadmium plating (P) suffixes, which do not change the geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, all scanned. SHA-256 b2495f8f3197.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "416 of 1,303 items agreed. 291 differences went to a third reader. A second pass settled 2 from a closer look at the page, 1 from the sheet's layout (a point the scan did not print). 7 readings remain open.",
     "result": "7 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "1,277 checks on size series and limits. 61 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 12 tables (2,296 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "205 solids in STEP AP242. 2,170 of 2,170 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 1 - Cancellation, 12 June 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 2, row 216-24, 2 5 DIAMETER M: read as 6 4375, could be 6 4376.",
    "Open reading. Page 2, row 750-10, N: read as 20 125, could be 20 12-.",
    "Open reading. Page 3, row 164-36, 1 5 DIAMETER M: read as 3 250, could be 1 250.",
    "Open reading. Page 4, row 750-10, A MIN: read as 0402, could be 0482.",
    "Open reading. Page 4, row 112-40, T MIN: read as 0073, could be 0075.",
    "Open reading. Page 3, row 1 500-12, 2 DIAMETER M: read as 15 5125, could be 15 8125.",
    "Open reading. Page 2, row 625-11, N: read as 13 375, could be 18 375.",
    "Printed value to confirm. In the fine-thread insert dimensions table on page 5, A MIN prints .0059 for size .164-36, below .0068 for the finer .138-40 and .0076 for .190-32. Everywhere else in both insert tables A MIN grows as the pitch gets coarser, so .0059 for a 36-pitch thread looks wrong.",
    "Printed value to confirm. In the fine-thread insert dimensions table on page 5, G MIN prints .072 for size .099-56 (a revised row) and .060 for the next size, .112-48. Every other G MIN in the column rises with size, and the coarse table gives .070 for both .099-48 and .112-40, so one of the two values looks wrong.",
    "Printed value to confirm. In the fine-thread insert dimensions table on page 5, G MAX prints .588 for size .625-18 and .557 for the next size, .750-16, while G MIN rises from .386 to .464. Every other G MAX in the column rises with size, so one of these two values looks wrong."
   ]
  },
  {
   "id": "MS21353M",
   "slug": "ms21353m",
   "title": "Switch, toggle, positive break, special circuit, miniature, toggle sealed, solder lug, double pole, .469 mounting bushing",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS21353M Switch, toggle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 8,
   "dimensions": 208,
   "dimensions_met": 208,
   "kind": "Detail specification sheet",
   "dated": "21 December 2025",
   "status": "Active, 21 December 2025",
   "newest": "Revision M, 21 December 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5930-01-039-3771, switch, toggle, MS21353-341 (Los Angeles)"
   ],
   "files": {
    "package": "MS21353M package.pdf",
    "scan": "MS21353M legacy scan.pdf",
    "clean": "MS21353M clean copy.pdf",
    "record": "MS21353M validation record.pdf",
    "sheet": "MS21353M 3D model.pdf",
    "parts": "MS21353M parts list.pdf",
    "inspection": "MS21353M inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS21353-321-freecad.png",
    "pair": "Models/views/MS21353-321-pair.png",
    "record": "Models/views/MS21353-321-record.png",
    "front": "Models/views/MS21353-321-front.png",
    "top": "Models/views/MS21353-321-top.png",
    "right": "Models/views/MS21353-321-right.png",
    "cut": "Models/views/MS21353-321-cut.png"
   },
   "shown_part": "MS21353-321",
   "application": "FreeCAD 1.1.4",
   "modeled": "Eight envelope solids, one per dash number, of the Figure 1 outline: the toggle lever in the center position, the .469-32 bushing with its keyway, the body at its maximum outline and the six solder lug terminals; the eight are identical because the dash numbers differ only in circuit, toggle seal series and ratings.",
   "not_modeled": [
    "Lever travel: the 28\u00b0 \u00b18\u00b0 throw between the extreme positions and the 14\u00b0 \u00b14\u00b0 from the center position; the solids hold the lever on the bushing axis.",
    "Thread form of the .469-32 UNS-2A bushing, the .438 \u00b1.025 thread length and the .030 minimum unthreaded length when mounting, which a plain cylinder does not separate.",
    "The mounting hardware drawn on the figure (two .469-32 UNS-2B hex mounting nuts, the .469 lockwasher and the .469 locking ring), which MIL-DTL-8834 dimensions in its appendix.",
    "The bushing end chamfer, lever bore, toggle seal and internal switching mechanism, none of which is dimensioned.",
    "Body corner contour, the terminal barrier and the lug outline beyond thickness, spacing and hole, which the drawing makes optional, and the terminal marking.",
    "Circuit arrangement, current ratings, life, seal tests, the .0463 lb weight limit and the other performance requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 bde142b795ad.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "588 of 608 items agreed. All 12 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (146 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "8 solids in STEP AP242. 208 of 208 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision M, 21 December 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Note 2 prints the general tolerance on decimals as \u00b1 0.10, which puts the untoleranced .469 bushing length at .369 to .569; if \u00b1.010 is meant the limits are .459 to .479, and the engineer should confirm which."
   ]
  },
  {
   "id": "MS21354N",
   "slug": "ms21354n",
   "title": "Switch, toggle, positive break, miniature, toggle sealed, printed circuit board terminals, single pole, .250 mounting bushing",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS21354N Switch, toggle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 8,
   "dimensions": 180,
   "dimensions_met": 180,
   "kind": "Detail specification sheet",
   "dated": "2 November 2022",
   "status": "Active, 2 November 2022",
   "newest": "Revision N, 2 November 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 3,
   "by_class": {
    "Los Angeles": 2,
    "Seawolf": 1
   },
   "stock_examples": [
    "5930-01-043-3006, switch, toggle, MS21354-231 (Los Angeles)",
    "5930-01-181-4783, switch, toggle, MS21354-211 (Los Angeles)",
    "5930-01-364-7792, switch, toggle, MS21354-321 (Seawolf)"
   ],
   "files": {
    "package": "MS21354N package.pdf",
    "scan": "MS21354N legacy scan.pdf",
    "clean": "MS21354N clean copy.pdf",
    "record": "MS21354N validation record.pdf",
    "sheet": "MS21354N 3D model.pdf",
    "parts": "MS21354N parts list.pdf",
    "inspection": "MS21354N inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS21354-241-freecad.png",
    "pair": "Models/views/MS21354-241-pair.png",
    "record": "Models/views/MS21354-241-record.png",
    "front": "Models/views/MS21354-241-front.png",
    "top": "Models/views/MS21354-241-top.png",
    "right": "Models/views/MS21354-241-right.png",
    "cut": "Models/views/MS21354-241-cut.png"
   },
   "shown_part": "MS21354-241",
   "application": "FreeCAD 1.1.4",
   "modeled": "Eight envelope solids, one per dash number, of the Figure 1 outline: the toggle lever in the center position, the .250-40 bushing, the body at its maximum outline, the locking tab and the printed circuit board terminals, with a terminal left off where Table I note 4/ says it is not supplied.",
   "not_modeled": [
    "Lever travel: the 42\u00b0 \u00b18\u00b0 throw between the extreme positions and the 21\u00b0 \u00b14\u00b0 from the center position; the solids hold the lever on the bushing axis.",
    "Thread form of the .250-40 UNS-2A bushing, the bushing end chamfer and the .067 \u00b1.003 width the lever detail draws on the bushing.",
    "The .250-40 UNS-2B hex nut and .250 lockwasher, which MIL-DTL-8834 dimensions in its appendix, and the .408 maximum round outline the end view draws in front of the body.",
    "The silicone seal (.293 +.008 -.003 diameter, .035 +.008 -.003 section) and its seal groove (.020 +.008 -.000, rectangular or radial), whose location and width the drawing does not give.",
    "The .045 \u00b1.005 and .010 dimensions at the front of the body in the lever detail, and the dimple on the locking tab that the mounting view draws seating in the panel indentation.",
    "The .038 width on the dashed continuation of each terminal beyond its .200 length, and the terminal standoff, which the drawing makes optional.",
    "The panel cutout: the .257 +.005 -.003 mounting hole, the anti-rotation indentation .270 \u00b1.005 from its center and the .062 maximum panel thickness.",
    "Body corner contour, the toggle seal and the internal switching mechanism, none of which is dimensioned.",
    "Circuit arrangement, current ratings, dielectric strength, shock, the .011 lb weight limit and the other performance requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 1 scanned. SHA-256 3776ac89717b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "467 of 468 items agreed. All 1 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "49 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 1 table (88 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "8 solids in STEP AP242. 180 of 180 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision N, 2 November 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 points terminal 3 to note 4, but the figure's notes end at note 3; the solids apply Table I note 4/, that non-functional terminals shall not be supplied.",
    "Model. The lever detail gives .045 \u00b1.005 and .010 at the front of the body and .067 \u00b1.003 on the bushing without showing clearly which features they measure, so the solids carry none of the three."
   ]
  },
  {
   "id": "MS21355L",
   "slug": "ms21355l",
   "title": "Switch, toggle, positive break, miniature, toggle sealed, printed circuit board terminals, double pole, .250 mounting bushing",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS21355L Switch, toggle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 11,
   "dimensions": 421,
   "dimensions_met": 421,
   "kind": "Detail specification sheet",
   "dated": "2 November 2022",
   "status": "Active, 2 November 2022",
   "newest": "Revision L, 2 November 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5930-01-046-6954, switch, toggle, MS21355-231 (Los Angeles)"
   ],
   "files": {
    "package": "MS21355L package.pdf",
    "scan": "MS21355L legacy scan.pdf",
    "clean": "MS21355L clean copy.pdf",
    "record": "MS21355L validation record.pdf",
    "sheet": "MS21355L 3D model.pdf",
    "parts": "MS21355L parts list.pdf",
    "inspection": "MS21355L inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS21355-221-freecad.png",
    "pair": "Models/views/MS21355-221-pair.png",
    "record": "Models/views/MS21355-221-record.png",
    "front": "Models/views/MS21355-221-front.png",
    "top": "Models/views/MS21355-221-top.png",
    "right": "Models/views/MS21355-221-right.png",
    "cut": "Models/views/MS21355-221-cut.png"
   },
   "shown_part": "MS21355-221",
   "application": "FreeCAD 1.1.4",
   "modeled": "Eleven envelope solids, one per Table I dash number, of the Figure 1 outline: the toggle lever in the center position, the .250-40 bushing, the case at its maximum outline, the locking tab and the printed circuit board terminals, with the terminals that footnote 4 leaves off removed for -221, -241 and -281.",
   "not_modeled": [
    "Lever travel: the 42\u00b0 \u00b18\u00b0 throw between the extreme positions and the 21\u00b0 \u00b14\u00b0 from the center; every solid holds the lever on the bushing axis, including the two-position -221 and -241, whose lever does not rest there in every position.",
    "Thread form of the .250-40 UNS-2A bushing and any bushing bore, chamfer or keyway, none of which is dimensioned.",
    "The mounting hardware drawn on the figure (the .250-40 UNS-2B hex mounting nut and the .250 lockwasher, which MIL-DTL-8834 covers) and the .408 maximum diameter of the round parts drawn around the bushing in the end view, whose thicknesses the drawing does not give.",
    "The silicone seal (.293 \u00b1.003 diameter, .035 \u00b1.003 section) and the .020 +.008 -.000 seal groove, whose location on the switch the drawing does not fix.",
    "The locking tab detail of the lower view (.010 and .045 \u00b1.005), which the drawing gives in a separate view without tying it to the switch outline.",
    "The terminal shoulder drawn next to the case in the terminal detail, which is not dimensioned.",
    "The panel cutout of page 2 (.257 +.005 -.003 hole, anti-rotation indentation .270 \u00b1.005 from its center, .062 maximum panel thickness).",
    "Case corner contour, the terminal barrier and the terminal tips, which the drawing makes optional, and the terminal identification, which need not be marked.",
    "Circuit arrangement, current ratings, dielectric, shock and altitude requirements, terminal and actuator strength, gold plating and the .0143 lb weight limit."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 1 scanned. SHA-256 3c0ab858c3b2.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "534 of 541 items agreed. All 8 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "60 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 1 table (121 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "11 solids in STEP AP242. 421 of 421 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision L, 2 November 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The figure points the barrier design and terminal configuration callout to SEE Note 16, but the sheet prints only notes 1 and 2, so the requirement it refers to is missing."
   ]
  },
  {
   "id": "MS21433G",
   "slug": "ms21433g",
   "title": "Switch, toggle, positive break, miniature, toggle sealed, single pole, printed circuit board terminals, right angle mount",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS21433G Switch, toggle",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 3,
   "solids": 8,
   "dimensions": 306,
   "dimensions_met": 306,
   "kind": "Detail specification sheet",
   "dated": "8 November 2022",
   "status": "Inactive, 8 November 2022",
   "newest": "Revision G, 8 November 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5930-01-084-6603, switch, toggle, MS21433-231 (Los Angeles)"
   ],
   "files": {
    "package": "MS21433G package.pdf",
    "scan": "MS21433G legacy scan.pdf",
    "clean": "MS21433G clean copy.pdf",
    "record": "MS21433G validation record.pdf",
    "sheet": "MS21433G 3D model.pdf",
    "parts": "MS21433G parts list.pdf",
    "inspection": "MS21433G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS21433-231-freecad.png",
    "pair": "Models/views/MS21433-231-pair.png",
    "record": "Models/views/MS21433-231-record.png",
    "front": "Models/views/MS21433-231-front.png",
    "top": "Models/views/MS21433-231-top.png",
    "right": "Models/views/MS21433-231-right.png",
    "cut": "Models/views/MS21433-231-cut.png"
   },
   "shown_part": "MS21433-231",
   "application": "FreeCAD 1.1.4",
   "modeled": "Eight solids, one per Table I dash number (-211 to -321), of the single Figure 1 outline: the toggle lever with its .093 spherical tip and 2\u00b0 taper, the .250-40 bushing, the L-shaped mounting bracket with its locking tab and two board legs, the case at its .364 by .572 maximum section and the three formed printed circuit board terminals, with the lever centered except on -221 and -231, which have no center position and show it thrown 21\u00b0 to the locking tab side.",
   "not_modeled": [
    "Lever travel: the 42\u00b0 \u00b18\u00b0 throw between the extreme positions and the other lever positions; each solid holds the lever in one position only.",
    "Thread form of the .250-40 UNS-2A bushing, which is a plain cylinder at the major diameter.",
    "The hex mounting nut and .250 lockwasher drawn on the figure, which MIL-DTL-8834 dimensions in its appendix.",
    "The case contour, which the figure makes optional within the maximum dimensions: its rounded corners, the front collar drawn between the bracket and the case, and the toggle seal and switching mechanism inside.",
    "The notch drawn at the front of the locking tab, the bend radii of the bracket and terminals, the tapered terminal tips and the optional terminal configuration of the rear view.",
    "The circuit board and its holes; the drilling dimensions are checked as the positions of the legs and terminals that enter them.",
    "Terminal identification (note 3), gold plating, bracket material and finish, circuits, current ratings, the weight limit, shock, terminal and actuator strength, altitude and the other performance requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 59f7f7178cdd.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "501 of 512 items agreed. 14 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "48 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (88 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "8 solids in STEP AP242. 306 of 306 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision G, 8 November 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 1, Small mark just above the .045 \u00b1.005 callout: read as (left out of callouts), could be 1l.",
    "Model. Figure 1 draws the .067 \u00b1.003 extension lines from a narrower band that starts inside the .125 locking tab and runs back to the rear face of the case without naming it; the solids take it as the height of a finger of the tab along the case side, and the engineer should confirm what the .067 dimensions.",
    "Model. Figure 1 points to note 4 at the terminals, but the sheet prints only notes 1 to 3, so whatever note 4 requires of the terminals is missing from the document."
   ]
  },
  {
   "id": "MS24266R w/AMENDMENT 1",
   "slug": "ms24266r-w-amendment-1",
   "title": "Connectors, plug, electrical, straight, miniature, classes E, F, G and R",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS24266R w_AMENDMENT 1 Connectors, plug",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 18,
   "solids": 72,
   "dimensions": 1530,
   "dimensions_met": 1530,
   "kind": "Detail specification sheet",
   "dated": "21 OCTOBER 2026",
   "status": "Inactive, 21 October 2026",
   "newest": "Revision R Amendment 1 (amendment incorporated), 21 October 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-00-081-4340, connector, plug, electrical, MS24266R22B55S (Los Angeles)"
   ],
   "files": {
    "package": "MS24266R w_AMENDMENT 1 package.pdf",
    "scan": "MS24266R w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MS24266R w_AMENDMENT 1 clean copy.pdf",
    "record": "MS24266R w_AMENDMENT 1 validation record.pdf",
    "sheet": "MS24266R w_AMENDMENT 1 3D model.pdf",
    "parts": "MS24266R w_AMENDMENT 1 parts list.pdf",
    "inspection": "MS24266R w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS24266E16BXXS-freecad.png",
    "pair": "Models/views/MS24266E16BXXS-pair.png",
    "record": "Models/views/MS24266E16BXXS-record.png",
    "front": "Models/views/MS24266E16BXXS-front.png",
    "top": "Models/views/MS24266E16BXXS-top.png",
    "right": "Models/views/MS24266E16BXXS-right.png",
    "cut": "Models/views/MS24266E16BXXS-cut.png"
   },
   "shown_part": "MS24266E16BXXS",
   "application": "FreeCAD 1.1.4",
   "modeled": "72 envelope solids of the MS24266 straight plug, one for every shell size 8 to 24 in coupling type T and type B, style P and style S, with the class F, G and R rear end and with the class E rear end: the shell front tube RR with bore R and chamfer B, the insert E at its stated location, the type T coupling nut T with the YY counterbore and the A thread down to the shoulder, the type B coupling ring T with the PP and LL bores and three D holes, and the rear thread cylinder (FF, or F1 for class E), relief and grommet HH.",
   "not_modeled": [
    "Insert arrangements, contacts and polarizing positions, which MIL-STD-1554 defines; the .091/.071 pin contact location (.056 min under note 7), the .260 max socket contact gauge depth (note 5), and the .024/.019 and .054/.015 insert face and contact locations of Detail A.",
    "The five polarizing keys on the shell (end view, page 3), with the .125 min key length and the .335/.325, .182/.177 and .330/.316 positions; the sheet gives neither their width nor their height.",
    "The type B bayonet grooves (C min width, NN min root diameter, .005 R max, 120\u00b0 apart within .004 TP, lead angle optional), whose path along the ring the sheet leaves open; the .004 TP of the D holes; and the .087/.082 at the front of the coupling ring, whose reference line Figure 2 does not make clear.",
    "The .010/.005 radius and the 7\u00b0/6\u00b0 lead-in of .022/.018 at the shell bore entry (Detail A), and the 7\u00b0/6\u00b0 insert edge chamfer of .022/.018 by .020/.015 (Detail B).",
    "The optional shell design for classes F, G and R on page 4 (.367 min, .220, the .085/.073 relief groove of note 9 or .221 min full thread without it, .025/.015, 1.125 to 1.375); those solids use the Figure 1 page 2 rear end.",
    "Thread form: the pitch of A and F, the F1 pitch diameter (.4151/.4114 to 1.3931/1.3885), and the truncated major diameter that note 13 allows down to FF min.",
    "Concentricity (.015 and .004 TIR), the coupling nut knurl, materials and finishes (note 10), and the Figure 4 weights, which a solid envelope does not carry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, 4 scanned. SHA-256 5bcb89b70034.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,015 of 2,063 items agreed. All 33 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "115 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "14 pages of searchable text, 9 tables (490 cells), 8 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "72 solids in STEP AP242. 1,530 of 1,530 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision R Amendment 1 (amendment incorporated), 21 October 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Shell size 16 prints coupling thread A as 1.0625-10 under the UNEF-2B heading, while the F column prints 1.0625-18 UNEF for size 18; the pitch must be confirmed (the solids use only the 1.0625 major diameter).",
    "Model. Figure 2 gives no pin insert location for type B style P; the solids use the type T location (.3355 behind the shell front face), which an engineer must confirm.",
    "Model. The sheet gives no length for the coupling nut, the coupling ring or the grommet, so the envelope behind the shoulder rests on the .367 (.314) minimum and the figure proportions and is not a confirmed space claim."
   ]
  },
  {
   "id": "MS24367",
   "slug": "ms24367",
   "title": "Lamp, incandescent - miniature integral lighting",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS24367 Lamp, incandescent - miniature integral lighting",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 1,
   "solids": 8,
   "dimensions": 72,
   "dimensions_met": 72,
   "kind": "Military standard",
   "dated": "30 Mar 71",
   "status": "Canceled, 28 September 1995",
   "newest": "Revision C Notice 2 - Cancellation, 28 September 1995",
   "superseding": "",
   "preparing_activity": "Air Force Life Cycle Management Center - Aircraft Systems",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-926-4462, lamp, incandescent, MS24367-715 (Los Angeles)"
   ],
   "files": {
    "package": "MS24367 package.pdf",
    "scan": "MS24367 legacy scan.pdf",
    "clean": "MS24367 clean copy.pdf",
    "record": "MS24367 validation record.pdf",
    "sheet": "MS24367 3D model.pdf",
    "parts": "MS24367 parts list.pdf",
    "inspection": "MS24367 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS24367-680AS15-freecad.png",
    "pair": "Models/views/MS24367-680AS15-pair.png",
    "record": "Models/views/MS24367-680AS15-record.png",
    "front": "Models/views/MS24367-680AS15-front.png",
    "top": "Models/views/MS24367-680AS15-top.png",
    "right": "Models/views/MS24367-680AS15-right.png",
    "cut": "Models/views/MS24367-680AS15-cut.png"
   },
   "shown_part": "MS24367-680AS15",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope models of the 8 clear miniature lamps MS24367-680, -683, -713, -715, -680AS15, -683AS15, -713AS15 and -715AS15, which share one outline: a .120 diameter bulb .235 long with a .062 spherical tip, and two .010 diameter leads running .500 beyond it with a .025 clear gap between them.",
   "not_modeled": [
    "The inside of the lamp (glass wall, filament, lead-in wires and seal): the bulb is a solid of its outside shape.",
    "The light center length, 0.08 \u00b10.03 from the tip to the filament, since the filament is not modeled.",
    "The tinning on the leads, the clear finish, and the table's electrical ratings with the candlepower, aging, selection and life notes, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 a0490002fae7.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "226 of 276 items agreed. 37 differences went to a third reader. A second pass settled 1 from a second printing in the document, 1 from the document's record in ASSIST, 1 from the sheet's layout (a point the scan did not print). 2 readings remain open. 1 value that the scan prints in a doubtful form is listed for the engineer. 1 mark outside the technical content is kept as transcription notes.",
     "result": "2 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "14 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 1 table (48 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "8 solids in STEP AP242. 72 of 72 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 2 - Cancellation, 28 September 1995.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 1, rows 1-8, column 3 (one merged RATED VOLTAGE cell): read as 3.0, could be 5.0.",
    "Open reading. Page 1, row 1, column 5: read as 0.03 \u00b1 25%, could be 3.03 \u00b1 25%.",
    "Printed value to confirm. Neither number shows a leading decimal point, though the other callouts show theirs; read as .235 \u00b1.015.",
    "Model. The bulb length and the lead length are built on readings still open: .235 \u00b1.015 could be 235 \u00b1015, and .500 could be 500."
   ]
  },
  {
   "id": "MS27656E w/AMENDMENT 1",
   "slug": "ms27656e-w-amendment-1",
   "title": "Connectors, receptacle, electrical, back panel, wall mounting flange, crimp type, bayonet coupling, series I",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS27656E w_AMENDMENT 1 Connectors, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 27,
   "dimensions": 747,
   "dimensions_met": 747,
   "kind": "Detail specification sheet",
   "dated": "27 June 2025",
   "status": "Active, 27 June 2025",
   "newest": "Revision E Amendment 1 (amendment incorporated), 27 June 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-01-043-6946, connector, receptacle, electrical, MS27656E11F98S (Los Angeles)"
   ],
   "files": {
    "package": "MS27656E w_AMENDMENT 1 package.pdf",
    "scan": "MS27656E w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MS27656E w_AMENDMENT 1 clean copy.pdf",
    "record": "MS27656E w_AMENDMENT 1 validation record.pdf",
    "sheet": "MS27656E w_AMENDMENT 1 3D model.pdf",
    "parts": "MS27656E w_AMENDMENT 1 parts list.pdf",
    "inspection": "MS27656E w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS27656P25-freecad.png",
    "pair": "Models/views/MS27656P25-pair.png",
    "record": "Models/views/MS27656P25-record.png",
    "front": "Models/views/MS27656P25-front.png",
    "top": "Models/views/MS27656P25-top.png",
    "right": "Models/views/MS27656P25-right.png",
    "cut": "Models/views/MS27656P25-cut.png"
   },
   "shown_part": "MS27656P25",
   "application": "FreeCAD 1.1.4",
   "modeled": "27 envelope solids, one per class E, P and T at each shell size 9 to 25: a square flange S by K with chamfered corners and four P holes at R BSC; a shell cylinder at the MIL-DTL-38999 F diameter from the front end, M ahead of the flange front face, with three bayonet pins (L dia at K from the front end, E dia over the pins); and a rear end to L max for the class from the flange front face, at the VV accessory thread major diameter for classes E and T (with the class T projections as a ring at HH dia) and at YP max over the potting form for class P.",
   "not_modeled": [
    "The front and rear end configuration that figure 1 refers to the procurement specifications, beyond the outside diameters taken from MIL-DTL-38999: the shell bore, inserts, contacts, keys and keyways, the class E grommet and the class P potting compound.",
    "The main keyway positions (note 3) and the other interface dimensions, which are given in MIL-DTL-38999, including the 85 degree BSC angle that locates a feature on the shell front, and the insert arrangements, which are given in MIL-STD-1560.",
    "The rear end detail of MIL-DTL-38999 figure 8: the VV thread form and the 45 degree chamfer to the root of the first thread, the number (NN) and tooth form of the class T projections, the grommet and sealing surface diameters (A, PP), and the inside diameter (XP) and taper of the class P potting form.",
    "T max, measured from the flange front face to a feature inside the broken-out section behind the flange, which belongs to the rear end configuration.",
    "F max, the panel thickness including mounting hardware (note 5), which limits the installation rather than the receptacle.",
    "The finish, insert arrangement, contact style and polarizing position of the part number, which do not change the flange or lengths; one solid stands for each class and shell size.",
    "The marking surface and surface finish."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 93c9fb6ea2d1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "472 of 499 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "154 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (182 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "27 solids in STEP AP242. 747 of 747 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 1 (amendment incorporated), 27 June 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Neither the sheet nor MIL-DTL-38999 gives the axial layout of the rear end behind the flange (where the VV thread starts, and where the class P potting form starts and how it tapers), so the VV major diameter and the YP max diameter run from the flange rear face to L max; the rear end layout must be confirmed before the envelope is used as a space claim.",
    "Model. Figure 1 references datum GG in the hole position frame but marks no feature as GG; note 4 gives only its gauge rule, so the datum feature must be confirmed.",
    "Model. The metric table pairs 1.125 in with 27.58 mm, but 1.125 in is 28.58 mm; note 2 makes the metric values information only, so the inch value governs and the metric entry needs correction.",
    "Model. The metric table pairs .085 in with 0.79 mm, but .085 in is 2.16 mm; note 2 makes the metric values information only, so the inch value governs and the metric entry needs correction."
   ]
  },
  {
   "id": "MS27955",
   "slug": "ms27955",
   "title": "Nut, plain-round, spanner",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS27955 Nut, plain-round",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 25,
   "dimensions": 375,
   "dimensions_met": 375,
   "kind": "Military standard",
   "dated": "16 FEB 1967",
   "status": "Inactive, 19 September 2018",
   "newest": "Revision A Notice 2 - Validation, 19 September 2018",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 2
   },
   "stock_examples": [
    "5310-01-493-6840, nut, plain, round, MS27955-20 (Los Angeles)",
    "5310-01-493-6842, nut, plain, round, MS27955-10 (Los Angeles)"
   ],
   "files": {
    "package": "MS27955 package.pdf",
    "scan": "MS27955 legacy scan.pdf",
    "clean": "MS27955 clean copy.pdf",
    "record": "MS27955 validation record.pdf",
    "sheet": "MS27955 3D model.pdf",
    "parts": "MS27955 parts list.pdf",
    "inspection": "MS27955 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS27955-13-freecad.png",
    "pair": "Models/views/MS27955-13-pair.png",
    "record": "Models/views/MS27955-13-record.png",
    "front": "Models/views/MS27955-13-front.png",
    "top": "Models/views/MS27955-13-top.png",
    "right": "Models/views/MS27955-13-right.png",
    "cut": "Models/views/MS27955-13-cut.png"
   },
   "shown_part": "MS27955-13",
   "application": "FreeCAD 1.1.4",
   "modeled": "Round spanner nuts MS27955-1 to -25: a ring of outside diameter C and thickness D with eight bottom-radiused slots to diameter F, a 50 degree outer chamfer down to E on one face, and a countersunk bore to J on both faces.",
   "not_modeled": [
    "Thread form of T (modeled as a plain bore at the thread major diameter)",
    "Thread pitch-diameter concentricity (.010 FIR to E, .020 FIR to C) and perpendicularity (.002 FIR) tolerances",
    "Material, phosphate coating, hardness, magnetic particle inspection, surface roughness and edge break (.003 to .015)",
    "Estimated weights, which are listed only as a parameter"
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 218dbd03863e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "489 of 501 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "265 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (275 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "25 solids in STEP AP242. 375 of 375 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision A Notice 2 - Validation, 19 September 2018. ASSIST also holds Revision A Amendment 1 (20 February 1996). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS28775",
   "slug": "ms28775",
   "title": "Packing, preformed, hydraulic, +275\u00b0F (\"O\" ring)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS28775 Packing, preformed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 349,
   "dimensions": 2794,
   "dimensions_met": 2793,
   "kind": "Military standard",
   "dated": "23 MAR 84",
   "status": "Canceled, 29 September 2000",
   "newest": "Revision E Notice 3 - Cancellation, 29 September 2000",
   "superseding": "SAE-AS28775",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Los Angeles": 2
   },
   "stock_examples": [
    "5331-00-060-4325, o-ring, MS28775-147 (Los Angeles)",
    "5331-01-105-9156, o-ring, MS28775-271 (Los Angeles)"
   ],
   "files": {
    "package": "MS28775 package.pdf",
    "scan": "MS28775 legacy scan.pdf",
    "clean": "MS28775 clean copy.pdf",
    "record": "MS28775 validation record.pdf",
    "sheet": "MS28775 3D model.pdf",
    "parts": "MS28775 parts list.pdf",
    "inspection": "MS28775 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS28775-248-freecad.png",
    "pair": "Models/views/MS28775-248-pair.png",
    "record": "Models/views/MS28775-248-record.png",
    "front": "Models/views/MS28775-248-front.png",
    "top": "Models/views/MS28775-248-top.png",
    "right": "Models/views/MS28775-248-right.png",
    "cut": "Models/views/MS28775-248-cut.png"
   },
   "shown_part": "MS28775-248",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid O-rings (tori with a circular cross-section) for all 349 dash numbers MS28775-001 to -475 in Tables I to IV, with ID and T at the middle of the band that meets both the inch and the mm limits.",
   "not_modeled": [
    "Material, hardness and performance, which MIL-P-25732 defines.",
    "Mold flash and the off-register allowance of up to 0.003 in. permitted by note 3; the cross-section is a perfect circle.",
    "Approximate mass per 100 pieces, which is listed as a table parameter but not checked because the document gives no density.",
    "Static-only and inactive-for-new-design status from notes 1 and 5, which restricts use, not shape."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, all scanned. SHA-256 9d9a3a24c151.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,620 of 4,492 items agreed. All 70 differences were settled against the page image. A second pass settled 2 from the same value on another sheet of the series, 4 from a second printing in the document, 1 from a closer look at the page, 1 from the document's record in ASSIST. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "4,836 checks on size series and limits. 48 breaks checked against the scan: all are as printed. 1,356 values are also printed on 3 other sheets of the series: 1,350 match, 6 differ as printed. A later review settled 5 printed values from the document's own conversions.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 5 tables (3,839 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "349 solids in STEP AP242. 2,793 of 2,794 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 3 - Cancellation, 29 September 2000.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table IV, page 7, row MS28775-378 prints ID (mm) minimum 265.30 and maximum 236.83, so the maximum is below the minimum; the inch limits 10.445 to 10.505 on the same row give 265.30 to 266.83 mm. The printed maximum looks like a printing error for 266.83.",
    "Differs within the series. ID, inside diameter, 261: 7.234 here; MS29513 prints 6.734, MIL-P-83461/1 prints 6.734, MS9068 prints 6.734. MS28775 sheet 6 prints ID 6.711 to 7.757 in. for -261 (clear at 12x, crops/ms28775-page 6-row261-IDmax-12x.png); MS29513 sheet 1 and MIL-P-83461/1 print 6.734 and MS9068 sheet 2 prints 6 711 to 6.757. The same MS28775 row prints 170.46 to 171.63 mm, which is 6.711 to 6.757 in., so the 7 of 7.757 is a printing error on MS28775; kept as printed.",
    "Differs within the series. ID, inside diameter, 377: 9.9755 here; MS29513 prints 9.975, MIL-P-83461/1 prints 9.975. MS28775 sheet 7 prints 9.945 to 10.006 for -377, the 6 clear at 12x beside the 5 of 10.505 on the next row (crops/ms28775-page 7-IDmax376-380-12x.png); MS29513 sheet 2 and MIL-P-83461/1 page 8 print 9.975. The MS28775 mm maximum 254.13 equals 10.005 in.",
    "Differs within the series. ID, inside diameter, 379: 10.9755 here; MS29513 prints 10.975, MIL-P-83461/1 prints 10.975. MS28775 sheet 7 prints 10.945 to 11.006 for -379, the 6 clear at 12x; MS29513 sheet 2 and MIL-P-83461/1 page 8 print 10.975. The MS28775 mm maximum 279.53 equals 11.005 in.",
    "Differs within the series. ID, inside diameter, tolerance, 261: \u00b1.523 here; MS29513 prints \u00b1.023, MS9068 prints \u00b1.023. Follows from the MS28775 maximum 7.757 printed for -261 on sheet 6 (half range .523); MS29513 prints \u00b1.023 and MS9068 prints 6 711 to 6.757 (\u00b1.023). The MS28775 mm column, 171.63, matches 6.757 in.",
    "Differs within the series. ID, inside diameter, tolerance, 377: \u00b1.0305 here; MS29513 prints \u00b1.030. Follows from the MS28775 limits 9.945 to 10.006 printed for -377 (half range .0305); MS29513 prints \u00b1.030.",
    "Differs within the series. ID, inside diameter, tolerance, 379: \u00b1.0305 here; MS29513 prints \u00b1.030. Follows from the MS28775 limits 10.945 to 11.006 printed for -379 (half range .0305); MS29513 prints \u00b1.030.",
    "Model. For MS28775-261 Table IV prints an inside diameter of 6.711 to 7.757 in., but the same row prints 170.46 to 171.63 mm, which is 6.711 to 6.757 in. The engineer must decide whether the inch maximum is 6.757; the model is built inside 6.711 to 6.757 in.",
    "Model. For MS28775-378 Table IV prints an inside diameter of 265.30 to 236.83 mm, a maximum below the minimum, while the inch limits on the same row, 10.445 to 10.505 in., give 265.30 to 266.83 mm. The engineer must decide whether the mm maximum is 266.83; the model follows the inch limits."
   ]
  },
  {
   "id": "MS3112H w/AMENDMENT 1",
   "slug": "ms3112h-w-amendment-1",
   "title": "Connectors, receptacle, electrical, box mounting, flange, bayonet coupling, solder contact, series 1",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS3112H w_AMENDMENT 1 Connectors, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 9,
   "dimensions": 198,
   "dimensions_met": 198,
   "kind": "Detail specification sheet",
   "dated": "05 March 2024",
   "status": "Inactive, 5 March 2024",
   "newest": "Revision H Amendment 1 (amendment incorporated), 5 March 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-00-822-2838, connector, receptacle, electrical, MS3112E22-55P (Los Angeles)"
   ],
   "files": {
    "package": "MS3112H w_AMENDMENT 1 package.pdf",
    "scan": "MS3112H w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MS3112H w_AMENDMENT 1 clean copy.pdf",
    "record": "MS3112H w_AMENDMENT 1 validation record.pdf",
    "sheet": "MS3112H w_AMENDMENT 1 3D model.pdf",
    "parts": "MS3112H w_AMENDMENT 1 parts list.pdf",
    "inspection": "MS3112H w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS3112_shell_size_16-freecad.png",
    "pair": "Models/views/MS3112_shell_size_16-pair.png",
    "record": "Models/views/MS3112_shell_size_16-record.png",
    "front": "Models/views/MS3112_shell_size_16-front.png",
    "top": "Models/views/MS3112_shell_size_16-top.png",
    "right": "Models/views/MS3112_shell_size_16-right.png",
    "cut": "Models/views/MS3112_shell_size_16-cut.png"
   },
   "shown_part": "MS3112 shell size 16",
   "application": "FreeCAD 1.1.4",
   "modeled": "9 envelope solids of the MS3112 receptacle, one per shell size 8 to 24: a square mounting flange A max wide and G thick with 45 degree chamfered corners and four H holes at B true position, F behind the shell front face, and one plain shell cylinder at C from the front face to J max behind the flange rear face.",
   "not_modeled": [
    "The insert, the pin (style P) and socket (style S) solder contacts and the insert arrangements, which are given in MIL-STD-1669; L max runs to the rear ends of the solder contacts, so it is checked only as an upper limit on the shell envelope.",
    "The master keyway (datum X), the insert polarizing keys and the bayonet pins on the front shell, which Figure 1 draws but does not size; the intermateability dimensions are in MIL-DTL-26482.",
    "The bore of the shell, the peripheral seal of Detail A (.020 +.015 -.005 and .031 \u00b1.016), the packing ring of Detail B (.070 +.010 -.000, .156 max, interference fit in the insert) and R max, the packing ring dimension at datum Y.",
    "The optional N UNEF-2A thread on the rear shell; its nominal major diameter lies within the C limits at every shell size.",
    "S max, drawn in the front and rear panel mounting reference views from the top of the mounting screw heads to the flange front face; it limits the panel and mounting hardware ahead of the flange, not the receptacle.",
    "The class, insert arrangement, contact style and alternate insert position of the part number, which do not change any dimension of Figure 1; one solid stands for each shell size.",
    "The rounded rear corner of the shell drawn in the section, marking and surface finish."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 2 scanned. SHA-256 33bab9fa687d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "418 of 447 items agreed. All 27 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "16 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 3 tables (142 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 198 of 198 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision H Amendment 1 (amendment incorporated), 5 March 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives the shell diameter C only at the rear shell and no size for the bayonet pins, so the front shell is built at C from the page 2 outline; the MIL-DTL-26482 intermateability dimensions must replace it before the envelope is used as a space claim."
   ]
  },
  {
   "id": "MS3122F",
   "slug": "ms3122f",
   "title": "Connectors, receptacle, electrical, crimp type, box mounting, flange, no. 4 holes, bayonet coupling, series 1",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS3122F Connectors, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 9,
   "dimensions": 189,
   "dimensions_met": 189,
   "kind": "Detail specification sheet",
   "dated": "1 March 2007",
   "status": "Inactive, 29 September 2021",
   "newest": "Revision F Notice 2 - Validation, 29 September 2021",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5935-00-822-2838, connector, receptacle, electrical, MS3122E-22-55P (Los Angeles)"
   ],
   "files": {
    "package": "MS3122F package.pdf",
    "scan": "MS3122F legacy scan.pdf",
    "clean": "MS3122F clean copy.pdf",
    "record": "MS3122F validation record.pdf",
    "sheet": "MS3122F 3D model.pdf",
    "parts": "MS3122F parts list.pdf",
    "inspection": "MS3122F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS3122_shell_size_16-freecad.png",
    "pair": "Models/views/MS3122_shell_size_16-pair.png",
    "record": "Models/views/MS3122_shell_size_16-record.png",
    "front": "Models/views/MS3122_shell_size_16-front.png",
    "top": "Models/views/MS3122_shell_size_16-top.png",
    "right": "Models/views/MS3122_shell_size_16-right.png",
    "cut": "Models/views/MS3122_shell_size_16-cut.png"
   },
   "shown_part": "MS3122 shell size 16",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MS3122 box mounting flange receptacle for all nine shell sizes 8 to 24, one per size for every class, insert arrangement, contact style and insert position: a shell of diameter D from the front face (datum E) to L behind the flange, a square flange F by A with its front face at C, four G holes on the E square, 45 degree corner chamfers set by J, and the insert out to the B overall length.",
   "not_modeled": [
    "The mating end: the shell bore, the master keyway .126 +.007 -.001 and the four keyways .063 +.007 -.001 at 60, 105, 140, 215 and 265 degrees, and the three bayonet pins, whose sizes the sheet refers to MIL-DTL-26482 intermateability dimensions; the solids are solid from the front face.",
    "The insert arrangement, the contacts and H, the pin contact location .085 or .147 +.010 -.020 behind the front face, which depend on the MIL-STD-1669 arrangement and the SAE-AS39029/31 and /32 contacts.",
    "K, the largest inside diameter of the gasket, and the Detail A and Detail B gasket and packing ring dimensions (.020 +.015 -.005, .031 \u00b1.016, .070 +.010 -.000 and .156 MAX), which are inside the envelope.",
    "M max (.087 for sizes 8 to 18, .212 for sizes 20 to 24), which Figure 1 tabulates but does not show on any view.",
    "The optional N UNEF-2A rear thread, the rounded rear corner of the shell, the potting provision of note 2, and the position tolerances of the holes and bayonet pins to the master keyway (datum X), which the solids do not carry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 1 scanned. SHA-256 5631ff3291de.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "428 of 432 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "38 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (163 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 189 of 189 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision F Notice 2 - Validation, 29 September 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 tabulates M max (.087 for sizes 8 to 18, .212 for sizes 20 to 24) but no view of Figure 1 shows what M measures.",
    "Model. The sheet gives no diameter for the insert behind the shell, so the solids use K as a stand-in that an engineer must replace with the manufacturer's insert diameter before using the rear end for potting or fit."
   ]
  },
  {
   "id": "MS3212",
   "slug": "ms3212",
   "title": "Screws, machine, pan head, cross-recessed, self-sealing, integral silicone O-ring, plain and self-locking",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS3212 Screws, machine",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 2,
   "solids": 56,
   "dimensions": 448,
   "dimensions_met": 448,
   "kind": "Military standard",
   "dated": "23 October 1986",
   "status": "Canceled, 25 November 1998",
   "newest": "Revision B Notice 2 - Cancellation, 25 November 1998",
   "superseding": "NASM3212",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5305-00-016-7125, screw, machine, MS3212-6 (Los Angeles)"
   ],
   "files": {
    "package": "MS3212 package.pdf",
    "scan": "MS3212 legacy scan.pdf",
    "clean": "MS3212 clean copy.pdf",
    "record": "MS3212 validation record.pdf",
    "sheet": "MS3212 3D model.pdf",
    "parts": "MS3212 parts list.pdf",
    "inspection": "MS3212 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS3212-29-freecad.png",
    "pair": "Models/views/MS3212-29-pair.png",
    "record": "Models/views/MS3212-29-record.png",
    "front": "Models/views/MS3212-29-front.png",
    "top": "Models/views/MS3212-29-top.png",
    "right": "Models/views/MS3212-29-right.png",
    "cut": "Models/views/MS3212-29-cut.png"
   },
   "shown_part": "MS3212-29",
   "application": "FreeCAD 1.1.4",
   "modeled": "Pan-head cross-recessed machine screws for all 56 dash numbers, sizes #4 to 1/4, each with a cylindrical head, a cross recess sized by M, N and T, and a thread envelope at the nominal major diameter to length L.",
   "not_modeled": [
    "The annular recess under the head and its silicone O-ring, which the sheet shows but does not dimension.",
    "The full Type I cross-recess form (wing angles, cone and fillets) of ANSI B18.6.3, to which Note 5 refers.",
    "Thread form, pitch and class 2A tolerances (FED-STD-H28) and thread length per ANSI B18.6.3 (Note 4).",
    "The self-locking element of the L-suffix part numbers (MIL-F-18240, MS15981); the L variants share the plain screws' geometry.",
    "Material (CRES, silicone O-ring), passivation and driver size."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 ff82b47ba2da.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "380 of 415 items agreed. 29 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "160 checks on size series and limits. 14 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (188 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "56 solids in STEP AP242. 448 of 448 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 2 - Cancellation, 25 November 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 1, row H HEAD HEIGHT MIN, column 1/4 250: read as 162, could be 182.",
    "Model. The sheet shows an annular recess under the head holding a sealing O-ring but gives no groove or O-ring dimensions. An engineer must set the groove and O-ring sizes from MIL-S-82496 or the manufacturer's drawing."
   ]
  },
  {
   "id": "MS3404(NAVY)",
   "slug": "ms3404-navy",
   "title": "Connectors, receptacle, electric, jam nut mounting, front release, crimp contact, AN type",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS3404(NAVY) Connectors, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 30,
   "dimensions": 420,
   "dimensions_met": 420,
   "kind": "Military standard",
   "dated": "23 MAR 76",
   "status": "Canceled, 23 December 2009",
   "newest": "Revision G Notice 3 - Cancellation, 23 December 2009",
   "superseding": "SAE-AS34041",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1,
    "Ohio": 1
   },
   "stock_examples": [
    "5935-01-328-1310, connector, receptacle, electrical, MS3404D14S-7EW (Los Angeles, Ohio)"
   ],
   "files": {
    "package": "MS3404(NAVY) package.pdf",
    "scan": "MS3404(NAVY) legacy scan.pdf",
    "clean": "MS3404(NAVY) clean copy.pdf",
    "record": "MS3404(NAVY) validation record.pdf",
    "sheet": "MS3404(NAVY) 3D model.pdf",
    "parts": "MS3404(NAVY) parts list.pdf",
    "inspection": "MS3404(NAVY) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS3404_20_L2-freecad.png",
    "pair": "Models/views/MS3404_20_L2-pair.png",
    "record": "Models/views/MS3404_20_L2-record.png",
    "front": "Models/views/MS3404_20_L2-front.png",
    "top": "Models/views/MS3404_20_L2-top.png",
    "right": "Models/views/MS3404_20_L2-right.png",
    "cut": "Models/views/MS3404_20_L2-cut.png"
   },
   "shown_part": "MS3404 20 L2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MS3404 jam nut receptacle for all 19 shell sizes at L MAX for size 16 and 12 contacts (L1) and, for sizes 16 to 48, for size 8, 4 and 10 contacts (L2): shell N to overall length L, round flange S at M with its O-ring projection DD, the spring pin polarizing key at Z, and the MS3186 jam nut T across flats with panel space in front of the flange.",
   "not_modeled": [
    "Insert arrangement, contacts and insulator (MIL-STD-1651, MIL-C-5015) and the shell bore; the solids are full envelopes.",
    "Front and rear end configuration (coupling thread, keyways, rear accessory thread), which the sheet refers to the procurement specification.",
    "The panel cutouts (O with the .095/.100 key notch, and the optional slotted cutout), which belong to the panel; O is recorded as a parameter and checked as clearance for N.",
    "The .060 dimension near the jam nut, whose end features the scan does not make clear.",
    "O-ring cross-section and jam nut thickness and thread, which ARP 568 and MS3186 define; the dash numbers are recorded as parameters.",
    "Class, material and alternate insert position variants, which do not change the dimensioned envelope."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 27090b8b5950.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "388 of 451 items agreed. All 27 differences were settled against the page image. 2 marks outside the technical content are kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "203 checks on size series and limits. 4 breaks checked against the scan: all are as printed. 87 values are also printed on 9 other sheets of the series: 86 match, 1 differs as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 1 table (228 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "30 solids in STEP AP242. 420 of 420 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision G Notice 3 - Cancellation, 23 December 2009.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. In the dimension table on page 2, column M prints .968 for shell size 12, while size 14 prints .966 and sizes 16 through 48 share a single .966 entry. Confirm whether size 12 should be .966 or really differs by .002.",
    "Differs within the series. Z, jam nut receptacle, by shell size, 8S: .326 here; MS3454 prints .323. MS3404 page 2 prints .326 clearly, the last digit a 6 with a closed lower bowl. MS3454 page 2 prints .323: the scan is heavy, but the last digit has the same open-left form as the first 3 of the cell and the 3 of .573, not the closed bowl of the 6 in -026 on the same page."
   ]
  },
  {
   "id": "MS3454",
   "slug": "ms3454",
   "title": "Connectors,receptacle,electrical, jam nut mounting,rear release crimp contact, AN type",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS3454 Connectors, receptacle",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 2,
   "solids": 30,
   "dimensions": 450,
   "dimensions_met": 449,
   "kind": "Military standard",
   "dated": "OCTOBER 18 1971",
   "status": "Canceled, 23 December 2009",
   "newest": "Revision C Notice 2 - Cancellation, 23 December 2009",
   "superseding": "SAE-AS34541",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 4,
   "by_class": {
    "Los Angeles": 3,
    "Seawolf": 1
   },
   "stock_examples": [
    "5935-01-725-2400, connector, receptacle, electrical, MS3454L14S-7SW (Los Angeles)",
    "5935-01-725-2440, connector, receptacle, electrical, MS3454L20-22SW (Los Angeles)",
    "5935-01-725-2443, connector, receptacle, electrical, MS3454L20-22SX (Los Angeles)",
    "5935-01-525-6811, connector, receptacle, electrical, MS3454W14S-7S (Seawolf)"
   ],
   "files": {
    "package": "MS3454 package.pdf",
    "scan": "MS3454 legacy scan.pdf",
    "clean": "MS3454 clean copy.pdf",
    "record": "MS3454 validation record.pdf",
    "sheet": "MS3454 3D model.pdf",
    "parts": "MS3454 parts list.pdf",
    "inspection": "MS3454 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS3454_20_size_16_12_contacts_-freecad.png",
    "pair": "Models/views/MS3454_20_size_16_12_contacts_-pair.png",
    "record": "Models/views/MS3454_20_size_16_12_contacts_-record.png",
    "front": "Models/views/MS3454_20_size_16_12_contacts_-front.png",
    "top": "Models/views/MS3454_20_size_16_12_contacts_-top.png",
    "right": "Models/views/MS3454_20_size_16_12_contacts_-right.png",
    "cut": "Models/views/MS3454_20_size_16_12_contacts_-cut.png"
   },
   "shown_part": "MS3454 20 (size 16 & 12 contacts)",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MS3454 jam nut receptacle for all 19 shell sizes, with both L MAX lengths for sizes 16 to 48: shell at N, round flange U with its mounting face at M, O-ring projecting DD, anti-rotation spring pin at Z, and the hex jam nut (S, SS) seated one maximum panel thickness behind the flange.",
   "not_modeled": [
    "Insert arrangements and contacts (MIL-STD-1651) and the front and rear end configuration, which the sheet refers to the procurement specification MIL-C-5015.",
    "Coupling and mounting threads, the three .032 safety wire holes (not located), the blue stripes, and the rear-end chamfer.",
    "The panel itself; the cutout O and the .093-.100 notch are checked as clearances for the shell and pin.",
    "Class, material designator and alternate insert positions, which do not change the dimensioned envelope."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 b2bd9d103930.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "444 of 509 items agreed. 42 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "285 checks on size series and limits. 5 breaks checked against the scan: all are as printed. 87 values are also printed on 9 other sheets of the series: 86 match, 1 differs as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (247 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "30 solids in STEP AP242. 449 of 450 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 2 - Cancellation, 23 December 2009.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 1, Stacked callout beside safety wire holes: read as .195 .186, could be .195 .136.",
    "Printed value to confirm. In the dimension table on page 2, shell size 10S prints U as .612, below the .625 shell diameter N of the same row and below the .687 printed for the smaller size 8S. Size 10SL, with the same N, S and SS, prints U as .812, and every other size prints U at least .187 above N, so the 10S flange width looks misprinted.",
    "Differs within the series. Z, jam nut receptacle, by shell size, 8S: .323 here; MS3404 prints .326. MS3404 page 2 prints .326 clearly, the last digit a 6 with a closed lower bowl. MS3454 page 2 prints .323: the scan is heavy, but the last digit has the same open-left form as the first 3 of the cell and the 3 of .573, not the closed bowl of the 6 in -026 on the same page.",
    "Model. The table on page 2 prints U as .612 for shell size 10S, smaller than the .625 shell diameter N of the same row, while size 10SL with the same N, S and SS prints .812 and every other size prints U at least .187 above N. The engineer must decide the 10S flange diameter; the 10S model builds the flange at .612 as printed, where it lies inside the shell.",
    "Model. The sheet names spring pin MS171430 without a diameter and does not locate the three .032 safety wire holes. The engineer must take the pin size from MS171430 and set the hole positions; the model uses a .090 pin and leaves the holes out."
   ]
  },
  {
   "id": "MS35214",
   "slug": "ms35214",
   "title": "Screw,machine-pan head, cross-recessed brass,UNC-2A",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS35214 Screw, machine-pan head",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 137,
   "dimensions": 822,
   "dimensions_met": 822,
   "kind": "Military standard",
   "dated": "31 DEC 87",
   "status": "Canceled, 29 February 2000",
   "newest": "Revision D Notice 1 - Cancellation, 29 February 2000",
   "superseding": "NASM35214",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5305-00-059-8263, screw, machine, MS35214-38 (Los Angeles)"
   ],
   "files": {
    "package": "MS35214 package.pdf",
    "scan": "MS35214 legacy scan.pdf",
    "clean": "MS35214 clean copy.pdf",
    "record": "MS35214 validation record.pdf",
    "sheet": "MS35214 3D model.pdf",
    "parts": "MS35214 parts list.pdf",
    "inspection": "MS35214 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS35214-59-freecad.png",
    "pair": "Models/views/MS35214-59-pair.png",
    "record": "Models/views/MS35214-59-record.png",
    "front": "Models/views/MS35214-59-front.png",
    "top": "Models/views/MS35214-59-top.png",
    "right": "Models/views/MS35214-59-right.png",
    "cut": "Models/views/MS35214-59-cut.png"
   },
   "shown_part": "MS35214-59",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid pan head screws, one per Table I dash number, with a flat-topped cylindrical head of diameter \u00d8A and height H, top edge radius P, fillet R under the head, and a plain body of diameter \u00d8D to length L.",
   "not_modeled": [
    "The cross recess, which the sheet defines by reference to MS9006 and does not dimension.",
    "The UNC-2A thread form and the full-form thread length of note 4; the threaded length is a plain cylinder.",
    "Material, black chemical finish or cadmium plate (C suffix), driver size and minimum tensile load.",
    "Table II interchangeability with canceled MS35229, MS35231 and AN515 dash numbers."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 6ae6170b6ee2.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "541 of 834 items agreed. All 39 differences were settled against the page image. A second pass settled 3 from a second printing in the document, 1 from the document's record in ASSIST.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "509 checks on size series and limits. 29 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 2 tables (821 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "137 solids in STEP AP242. 822 of 822 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision D Notice 1 - Cancellation, 29 February 2000. ASSIST also holds Revision D Amendment 1 (5 October 1992). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table II, page 3, prints a second row reading canceled 95, no AN515 number, superseding 83 just after B516-18, although canceled 95 already appears with B516-10 and 83 two rows up. The repeated row adds nothing and looks like a drafting error; the engineer should confirm it can be ignored.",
    "Printed value to confirm. Table II, page 3, prints a second row reading canceled 100, no AN515 number, superseding 88 just after B516-28, although canceled 100 already appears with B516-24 and 88 three rows up. The repeated row adds nothing and looks like a drafting error; the engineer should confirm it can be ignored.",
    "Printed value to confirm. Table II, page 3, prints B416-24 superseded by 75 a second time, between B416-32 (77) and B416-36 (78), although the same pair already appears with canceled 85 four rows up. The repeated row adds nothing and looks like a drafting error; the engineer should confirm it can be ignored."
   ]
  },
  {
   "id": "MS39242",
   "slug": "ms39242",
   "title": "Belt, V: fractional horsepower (4L and 13R cross-sectional designation).",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS39242 Belt, v-fractional horsepower",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 3,
   "solids": 146,
   "dimensions": 439,
   "dimensions_met": 439,
   "kind": "Military standard",
   "dated": "22 JUNE 1981",
   "status": "Canceled, 21 April 1994",
   "newest": "Revision B Notice 2 - Cancellation, 21 April 1994",
   "superseding": "A-A-52490",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 4,
   "by_class": {
    "Los Angeles": 4
   },
   "stock_examples": [
    "3030-00-528-3771, belt, v, MS39242-34 (Los Angeles)",
    "3030-00-528-3825, belts, v, matched set, MS39242-50 (Los Angeles)",
    "3030-00-528-4287, belts, v, matched set, MS39242-14 (Los Angeles)",
    "3030-00-528-4754, belt, v, MS39242-27 (Los Angeles)"
   ],
   "files": {
    "package": "MS39242 package.pdf",
    "scan": "MS39242 legacy scan.pdf",
    "clean": "MS39242 clean copy.pdf",
    "record": "MS39242 validation record.pdf",
    "sheet": "MS39242 3D model.pdf",
    "parts": "MS39242 parts list.pdf",
    "inspection": "MS39242 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS39242-13R455-freecad.png",
    "pair": "Models/views/MS39242-13R455-pair.png",
    "record": "Models/views/MS39242-13R455-record.png",
    "front": "Models/views/MS39242-13R455-front.png",
    "top": "Models/views/MS39242-13R455-top.png",
    "right": "Models/views/MS39242-13R455-right.png",
    "cut": "Models/views/MS39242-13R455-cut.png"
   },
   "shown_part": "MS39242-13R455",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid V-belt rings for all 146 dash numbers: MS39242-4L180 to -4L1000 (73 inch belts) and MS39242-13R455 to -13R2540 (73 millimeter belts), each at its effective outside length with the nominal section of the figure, 0.50 by 0.31 in. or 13 by 8 mm.",
   "not_modeled": [
    "The belt ride limits and the minimum bottom clearance of note 7, which are taken on the ZZ-B-215 test pulley; the sheet does not give the pulley groove, and it is not modeled.",
    "The oil-resistant versions (note 5, the letter R in place of the dash before the dash number, such as MS39242R4L180 and MS39242R13R455), which are the same belts; the solid of each dash number stands for them, and each part lists its oil-resistant number with its parameters.",
    "Material, cord and cover construction, oil resistance and the other requirements of ZZ-B-215.",
    "The shape a belt takes on its pulleys; each solid is a free circular ring."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 612c0c8e1270.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "294 of 331 items agreed. 31 differences went to a third reader. A second pass settled 2 from a closer look at the page, 2 from the sheet's layout (a point the scan did not print). 1 reading remains open. 2 values that the scan prints in a doubtful form are listed for the engineer.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "144 checks on size series and limits. 7 breaks checked against the scan: all are as printed. A later review settled 7 printed values from the column's units and limits.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 1 table (438 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "146 solids in STEP AP242. 439 of 439 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 2 - Cancellation, 21 April 1994.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. The -4L410 tolerance prints as + 025-0.62: the place of the first decimal point is blank and the second is a faint dot. Rows of the same group that print both points give + 0.25-0.62.",
    "Open reading. Page 1, row -4L620, column EFFECTIVE LENGTHS-INCHES / TOLERANCE: read as +0.31-069, could be +0.31-06? (last digit unreadable).",
    "Printed value to confirm. Fourteen inch tolerances on sheet 1 leave one or both decimal points blank, such as + 0.25-062 for -4L220 and + 025-062 for -4L350. Rows of the same group that print both points give + 0.25-0.62.",
    "Model. The sheet does not dimension the side angle or the bottom width of the belt section, and its sketch is not drawn to scale; the solids use a 40 degree included angle, which the engineer must confirm against ZZ-B-215, the procurement specification the sheet names.",
    "Model. MS39242-13R785 prints its effective outside length as 780 mm, while note 4 makes the digits of the dash number the length in millimeters, 785 mm; the solid is built at 775 mm, the middle of the printed 780 +6 -16 (764 to 786), which also lies within 785 +6 -16 (769 to 791), and the engineer must settle which length the belt is made to.",
    "Model. MS39242-13R1955 prints its tolerance as +6 -18 mm where every other belt from -13R1550 to -13R2010 prints +8 -18; the solid is built at 1949 mm, the middle of the printed band (1937 to 1961), which also lies within the +8 -18 band (1937 to 1963).",
    "Model. The last digit of the MS39242-4L620 minus tolerance is partly lost in the scan and is read as 9, giving +0.31 -0.69 like every other belt from -4L610 to -4L790; the solid is built at 61.81 in., which stays within the band for any last digit from 0 to 9.",
    "Model. Ten -4L lengths and 16 -4L tolerances print with a decimal point missing, and the solids read the point into its blank place (230 for -4L230 as 23.0 in., the length note 4 gives the dash number, and + 025-062 for -4L350 as +0.25 -0.62); the engineer should confirm these printed values."
   ]
  },
  {
   "id": "MS39243",
   "slug": "ms39243",
   "title": "Belt, V: fractional horsepower (5L and 16R cross-sectional designation).",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS39243 Belt, v-fractional horsepower",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 132,
   "dimensions": 396,
   "dimensions_met": 396,
   "kind": "Military standard",
   "dated": "22 JUNE 1981",
   "status": "Canceled, 21 April 1994",
   "newest": "Revision B Notice 2 - Cancellation, 21 April 1994",
   "superseding": "A-A-52490",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "3030-00-528-4610, belt, v, MS39243-5L450 (Los Angeles)"
   ],
   "files": {
    "package": "MS39243 package.pdf",
    "scan": "MS39243 legacy scan.pdf",
    "clean": "MS39243 clean copy.pdf",
    "record": "MS39243 validation record.pdf",
    "sheet": "MS39243 3D model.pdf",
    "parts": "MS39243 parts list.pdf",
    "inspection": "MS39243 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS39243-16R1525-freecad.png",
    "pair": "Models/views/MS39243-16R1525-pair.png",
    "record": "Models/views/MS39243-16R1525-record.png",
    "front": "Models/views/MS39243-16R1525-front.png",
    "top": "Models/views/MS39243-16R1525-top.png",
    "right": "Models/views/MS39243-16R1525-right.png",
    "cut": "Models/views/MS39243-16R1525-cut.png"
   },
   "shown_part": "MS39243-16R1525",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid V-belt rings for all 132 dash numbers: MS39243-5L250 to -5L1000 (66 inch belts) and MS39243-16R635 to -16R2540 (66 millimeter belts), each at its effective outside length with the nominal section of the figure, 0.66 by 0.38 in. or 16 by 9 mm.",
   "not_modeled": [
    "The belt ride limits and the bottom clearance of note 7, which are taken on the ZZ-B-215 test pulley; the sheet does not give the pulley groove, and it is not modeled.",
    "The oil-resistant versions (note 5, the letter R in place of the dash before the dash number, such as MS39243R5L250 and MS39243R16R635), which are the same belts; the solid of each dash number stands for them, and each part lists its oil-resistant number with its parameters.",
    "Material, cord and cover construction, oil resistance and the other requirements of ZZ-B-215.",
    "The shape a belt takes on its pulleys; each solid is a free circular ring."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 65058e17c494.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "278 of 336 items agreed. All 22 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "130 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 1 table (396 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "132 solids in STEP AP242. 396 of 396 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 2 - Cancellation, 21 April 1994.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet does not dimension the side angle or the bottom width of the belt section; the solids use the 40 degree included angle the figure is drawn at, which the engineer must confirm against ZZ-B-215, the procurement specification the sheet names."
   ]
  },
  {
   "id": "MS39255",
   "slug": "ms39255",
   "title": "Belt,\"V\":industrial (multiple drive) \"A\" and \"13C\" cross section",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS39255 Belt, \"v\"-industrial",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 47,
   "dimensions": 141,
   "dimensions_met": 141,
   "kind": "Military standard",
   "dated": "22 JUNE 1981",
   "status": "Canceled, 24 February 1993",
   "newest": "Revision B Notice 2 - Cancellation, 24 February 1993",
   "superseding": "A-A-52160",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "3030-00-529-0344, belt, v, MS39255A26 (Los Angeles)"
   ],
   "files": {
    "package": "MS39255 package.pdf",
    "scan": "MS39255 legacy scan.pdf",
    "clean": "MS39255 clean copy.pdf",
    "record": "MS39255 validation record.pdf",
    "sheet": "MS39255 3D model.pdf",
    "parts": "MS39255 parts list.pdf",
    "inspection": "MS39255 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS39255-13C1500-freecad.png",
    "pair": "Models/views/MS39255-13C1500-pair.png",
    "record": "Models/views/MS39255-13C1500-record.png",
    "front": "Models/views/MS39255-13C1500-front.png",
    "top": "Models/views/MS39255-13C1500-top.png",
    "right": "Models/views/MS39255-13C1500-right.png",
    "cut": "Models/views/MS39255-13C1500-cut.png"
   },
   "shown_part": "MS39255-13C1500",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid V-belt rings for all 47 dash numbers: MS39255-A26 to -A128 (19 inch belts at their pitch lengths) and MS39255-13C710 to -13C3310 (28 millimeter belts at their effective lengths), each with the nominal section of the figure, 0.50 by 0.31 in. or 13 by 8 mm.",
   "not_modeled": [
    "The optional crowned top face and concave sides that the figure draws dashed.",
    "The matching limits for one set (0.15 or 0.30 in. on the -A series, 4, 6 or 10 mm on the -13C series), which limit the spread of lengths among the belts of a matched set and do not apply to one belt; each part lists its limit with its parameters.",
    "The oil-resistant versions (note 5, R in place of the first dash, such as MS39255RA26) and the matched-set part numbers (note 7), which are the same belts; the solid of each dash number stands for them.",
    "Material, cord and cover construction, oil resistance and the other requirements of ZZ-B-225.",
    "The shape a belt takes on its sheaves; each solid is a free circular ring."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 bbe6b1e4409d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "448 of 547 items agreed. All 58 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "135 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (188 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "47 solids in STEP AP242. 141 of 141 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 2 - Cancellation, 24 February 1993.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet does not dimension the side angle or the bottom width of the belt section; the solids use the 40 degree included angle the figure is drawn at, which the engineer must confirm against ZZ-B-225, the procurement specification the sheet names.",
    "Model. The sheet does not locate the pitch line on which the -A pitch lengths are measured or say where the -13C effective lengths are measured; the solids take the pitch length at mid-depth and the effective length at the top face, and the engineer must confirm both against ZZ-B-225 before relying on the ring diameters."
   ]
  },
  {
   "id": "MS51045",
   "slug": "ms51045",
   "title": "Setscrew-hexagon socket, half-dog point, corrosion-resisting steel, passivated, UNC-3A",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS51045 Setscrew-hexagon socket, half-dog point",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 48,
   "dimensions": 336,
   "dimensions_met": 336,
   "kind": "Military standard",
   "dated": "29 DEC 1972",
   "status": "Canceled, 4 April 2000",
   "newest": "Revision B Notice 1 - Cancellation, 4 April 2000",
   "superseding": "NASM51045",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5305-00-054-9252, setscrew, MS51045-30 (Los Angeles, Seawolf)"
   ],
   "files": {
    "package": "MS51045 package.pdf",
    "scan": "MS51045 legacy scan.pdf",
    "clean": "MS51045 clean copy.pdf",
    "record": "MS51045 validation record.pdf",
    "sheet": "MS51045 3D model.pdf",
    "parts": "MS51045 parts list.pdf",
    "inspection": "MS51045 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS51045-50-freecad.png",
    "pair": "Models/views/MS51045-50-pair.png",
    "record": "Models/views/MS51045-50-record.png",
    "front": "Models/views/MS51045-50-front.png",
    "top": "Models/views/MS51045-50-top.png",
    "right": "Models/views/MS51045-50-right.png",
    "cut": "Models/views/MS51045-50-cut.png"
   },
   "shown_part": "MS51045-50",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MS51045 hexagon socket half-dog point setscrew, one per dash number (48 parts), with the hexagon socket, both 35 degree chamfers and the half-dog point.",
   "not_modeled": [
    "Thread form (UNC-3A per MIL-S-7742) is shown as a plain cylinder at the major diameter.",
    "Material, passivation per QQ-P-35 and the 2.0 max magnetic permeability requirement are not geometry.",
    "Socket depth and the socket bottom shape are not given by the document."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 d7bff7bf44fa.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "356 of 439 items agreed. All 67 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "119 checks on size series and limits. 9 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 2 tables (165 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "48 solids in STEP AP242. 336 of 336 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 1 - Cancellation, 4 April 2000.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The document gives no socket depth (key engagement) for any size; an engineer must set it, especially for the .125 and .188 long screws.",
    "Model. The figure gives both 35 degree chamfer angles, measured from a line square to the axis, but not the diameter to which either chamfer runs; the model takes the thread minor diameter, and an engineer must confirm or set that diameter."
   ]
  },
  {
   "id": "MS75009J w/ Amendment 5",
   "slug": "ms75009j-w-amendment-5",
   "title": "Bracket assembly, resistor (power type)",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS75009J w_ Amendment 5 Bracket assembly, resistor",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 23,
   "dimensions": 101,
   "dimensions_met": 101,
   "kind": "Detail specification sheet",
   "dated": "13 January 2020",
   "status": "Active, 16 October 2024",
   "newest": "Revision J Notice 1 - Validation, 16 October 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5905-00-860-6276, holder, resistor, MS75009 (Los Angeles)"
   ],
   "files": {
    "package": "MS75009J w_ Amendment 5 package.pdf",
    "scan": "MS75009J w_ Amendment 5 legacy scan.pdf",
    "clean": "MS75009J w_ Amendment 5 clean copy.pdf",
    "record": "MS75009J w_ Amendment 5 validation record.pdf",
    "sheet": "MS75009J w_ Amendment 5 3D model.pdf",
    "parts": "MS75009J w_ Amendment 5 parts list.pdf",
    "inspection": "MS75009J w_ Amendment 5 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS75009-8-freecad.png",
    "pair": "Models/views/MS75009-8-pair.png",
    "record": "Models/views/MS75009-8-record.png",
    "front": "Models/views/MS75009-8-front.png",
    "top": "Models/views/MS75009-8-top.png",
    "right": "Models/views/MS75009-8-right.png",
    "cut": "Models/views/MS75009-8-cut.png"
   },
   "shown_part": "MS75009-8",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid models of the 23 component parts that Figures 2 to 6 dimension: mica washers -1 to -4, centering washers -5 (cup) and -6 (eared), mounting brackets -7 to -9, threaded rods -10 to -15, phosphor-bronze lockwashers -16 and -17, and the shanks of pan head screws -18 to -23.",
   "not_modeled": [
    "The bracket assemblies -29 to -39 and -47 of Figure 1, which combine these parts with a MIL-PRF-26 or MIL-R-19365 resistor and with NASM15795 flat washers, MS51957 screws, NASM35649 and NASM35650 nuts and NASM35338 lock washers that this sheet does not dimension.",
    "The slotted pan head of screws -18 to -23, which Figure 5 draws without dimensions.",
    "The split and the helical set of the phosphor-bronze lockwashers, which Figure 6 draws without dimensions; the solids are closed flat rings, and the separate thicknesses T and t are not given.",
    "The thread form (FED-STD-H28), the 1.750 minimum thread length at each end, the chamfered ends that Figure 5 draws, and the thread extension beyond the nut in an assembly (footnote 2/).",
    "The optional rounded corners of the bracket foot, the taper and formed bends of the cup washer, and the bends at the base of the eared washer's ears.",
    "Materials, cadmium plating and the multi-sheet build-up the mica washer may use."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 0 scanned. SHA-256 0f9d72736297.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,180 of 1,226 items agreed. All 30 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "117 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 13 tables (448 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "23 solids in STEP AP242. 101 of 101 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J Notice 1 - Validation, 16 October 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Footnote 2/ to the centering washer table prints the tolerance on B of the -5 cup washer as \"\u00b1.005, -.000\"; the model reads it as +.005 -.000 (.463 to .468), and an engineer must confirm whether the lower limit is .463 or .458.",
    "Model. Figure 5 draws a slotted pan head on screws -18 to -23 but the sheet gives no head diameter, head height or slot size, and note 3 covers screws not made to MS51957; the head must be taken from another standard.",
    "Model. Assembly -34 lists threaded rod -10 and screw -18 (.164-32) and nut MS35649-284, as the #8 assemblies do, but lock washer -17 (Figure 6: #10 .190) and MS35338-138 or -157, as the #10 assemblies do; an engineer should confirm which lock washer size -34 takes."
   ]
  },
  {
   "id": "MS75089D",
   "slug": "ms75089d",
   "title": "Coils, radio frequency, molded, fixed, micro-miniature, magnetically shielded, (ferrite core \u2013 ferrite sleeve), types LT10K217 to LT10K263, inclusive",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS75089D Coils, radio frequency",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 94,
   "dimensions": 752,
   "dimensions_met": 752,
   "kind": "Performance specification sheet",
   "dated": "27 August 2026",
   "status": "Inactive, 27 August 2026",
   "newest": "Revision D Amendment 1 (amendment incorporated), 27 August 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5950-01-102-6815, coil, radio frequency, MS75089-45 (Los Angeles)"
   ],
   "files": {
    "package": "MS75089D package.pdf",
    "scan": "MS75089D legacy scan.pdf",
    "clean": "MS75089D clean copy.pdf",
    "record": "MS75089D validation record.pdf",
    "sheet": "MS75089D 3D model.pdf",
    "parts": "MS75089D parts list.pdf",
    "inspection": "MS75089D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS75089-48-freecad.png",
    "pair": "Models/views/MS75089-48-pair.png",
    "record": "Models/views/MS75089-48-record.png",
    "front": "Models/views/MS75089-48-front.png",
    "top": "Models/views/MS75089-48-top.png",
    "right": "Models/views/MS75089-48-right.png",
    "cut": "Models/views/MS75089-48-cut.png"
   },
   "shown_part": "MS75089-48",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 94 coils MS75089-01 to -94, each a cylindrical molded body with a .025 diameter axial lead wire running 1.438 out from the center of each end, in the two outlines of Figure 1: body .162 by .410 for -01 to -47 and .1745 by .4185 for -48 to -94.",
   "not_modeled": [
    "The coil inside the molded body (ferrite core, ferrite sleeve, winding and the joint between the leads and the winding), which the sheet does not draw; the body is solid.",
    "The electrical and environmental requirements, which do not change the outline: the Table I inductance, Q, self-resonant frequency, DC resistance and currents of each dash number, the Table II final limits, the temperature, shock, altitude, dielectric withstanding voltage and coupling requirements.",
    "The 0.035274 ounce maximum weight, the solderable or weldable finish of the lead wire (note 4) and marking, which depend on materials and processes the sheet does not give."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 4b7beea62ac0.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "879 of 879 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "322 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (463 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "94 solids in STEP AP242. 752 of 752 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision D Amendment 1 (amendment incorporated), 27 August 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table 1, column 'DC resistance (ohms)': 2.7 then 2.44. Page 3 and the old text layer both print 2.70 for dash 09, 56 and 2.44 for dash 10, 57; a DC resistance that falls while inductance rises from 68 to 82 uH looks wrong for its series and is a point for an engineer.",
    "Printed value to confirm. Table 1, column 'Rated DC current (mA)': 170 then 180. Page 3 and the old text layer both print 170 for dash 09, 56 and 180 for dash 10, 57; the rated current rises at the same row where DC resistance falls, consistent with the printed 2.44 ohm value, and the break looks wrong for its series as a point for an engineer."
   ]
  },
  {
   "id": "MS90030",
   "slug": "ms90030",
   "title": "Transformer, power, step-down, and step-up, type TF4RX03MB004",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS90030 Transformer, power",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 1,
   "dimensions": 54,
   "dimensions_met": 54,
   "kind": "Military standard",
   "dated": "26 MAY 1982",
   "status": "Canceled, 26 May 1982",
   "newest": "Revision F, 26 May 1982",
   "superseding": "MIL-T-27/301",
   "preparing_activity": "Army Research Laboratory, Physical Sciences Directorate (S/S by CR)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5950-00-617-4251, transformer, power, MS90030-2 (Los Angeles)"
   ],
   "files": {
    "package": "MS90030 package.pdf",
    "scan": "MS90030 legacy scan.pdf",
    "clean": "MS90030 clean copy.pdf",
    "record": "MS90030 validation record.pdf",
    "sheet": "MS90030 3D model.pdf",
    "parts": "MS90030 parts list.pdf",
    "inspection": "MS90030 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS90030-2-freecad.png",
    "pair": "Models/views/MS90030-2-pair.png",
    "record": "Models/views/MS90030-2-record.png",
    "front": "Models/views/MS90030-2-front.png",
    "top": "Models/views/MS90030-2-top.png",
    "right": "Models/views/MS90030-2-right.png",
    "cut": "Models/views/MS90030-2-cut.png"
   },
   "shown_part": "MS90030-2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid of MS90030-2, the one part number on the sheet: the rectangular case with its four 1/4-20 UNC-2A X 5/8 mounting studs and its eleven terminals on the terminal face, at the positions the figure gives from the case centrelines.",
   "not_modeled": [
    "The windings, core and grounded shield inside the case, and the electrical values of the circuit diagram (60 CPS; 105, 115 and 125 V primary taps; 6.3 V 8 A, 5 V 3 A and 900 V CT .25 A dc secondaries; working voltages; 10,000 ft maximum altitude).",
    "The real form and size of the terminals, which the sheet does not give.",
    "The circuit diagram and marking area on the case (note 5), which the figure places without dimensions.",
    "The thread form of the studs.",
    "The minimum chassis cutout, a panel feature, which is used only as a gauge for the studs and terminals."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 4febed5f5e78.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "202 of 330 items agreed. All 15 differences were settled against the page image. 1 value that the scan prints in a doubtful form is listed for the engineer.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "48 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (53 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "1 solid in STEP AP242. 54 of 54 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision F, 26 May 1982.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. The title lettering prints its zero and its capital O alike, so the type designation is read as TF4RX03MB004 with zeros.",
    "Model. The sheet gives no terminal diameter, form or length, so the model's round pins (.250 and .374 diameter, .625 long) are placeholders sized from the minimum chassis cutout, and the real terminals must be confirmed before the model is used for wiring or clearance.",
    "Model. The page is marked sheet 1 of 2, but the ASSIST image holds only this sheet, so any dimension on sheet 2 is not in the model."
   ]
  },
  {
   "id": "MS90452",
   "slug": "ms90452",
   "title": "Lamp, incandescent, T-3/4 bulb, integral lighting",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS90452 Lamp, incandescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 4,
   "dimensions": 32,
   "dimensions_met": 32,
   "kind": "Military standard",
   "dated": "17 MAY 67",
   "status": "Inactive, 28 November 2023",
   "newest": "Revision A Notice 2 - Validation, 28 November 2023",
   "superseding": "",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-724-6867, lamp, incandescent, MS90452-6833 (Los Angeles)"
   ],
   "files": {
    "package": "MS90452 package.pdf",
    "scan": "MS90452 legacy scan.pdf",
    "clean": "MS90452 clean copy.pdf",
    "record": "MS90452 validation record.pdf",
    "sheet": "MS90452 3D model.pdf",
    "parts": "MS90452 parts list.pdf",
    "inspection": "MS90452 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS90452-7133-freecad.png",
    "pair": "Models/views/MS90452-7133-pair.png",
    "record": "Models/views/MS90452-7133-record.png",
    "front": "Models/views/MS90452-7133-front.png",
    "top": "Models/views/MS90452-7133-top.png",
    "right": "Models/views/MS90452-7133-right.png",
    "cut": "Models/views/MS90452-7133-cut.png"
   },
   "shown_part": "MS90452-7133",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope models of the 4 T-3/4 clear lamps MS90452-6803, -6833, -7133 and -7153, which share one outline: a .094 diameter envelope .187 long with a rounded dome, and two .010 diameter leads running 1.25 beyond it with a .020 clear gap between them.",
   "not_modeled": [
    "The inside of the lamp (glass wall, filament, lead-in wires and seal): the clear envelope is a solid of its outside shape.",
    "The light center length, .06 approx. from the dome tip, since the filament is not modeled.",
    "The tinning on the leads, the clear finish, and the table's electrical ratings with the candlepower, aging and life notes, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 e0c9970ec5bb.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "147 of 163 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 1 table (35 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 32 of 32 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision A Notice 2 - Validation, 28 November 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS9068",
   "slug": "ms9068",
   "title": "Packing, preformed - AMS 3304, \"O\" ring",
   "class": "Los Angeles",
   "folder": "Los Angeles/MS9068 Packing, preformed - ams 3304",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 3,
   "solids": 229,
   "dimensions": 1145,
   "dimensions_met": 1144,
   "kind": "Military standard",
   "dated": "23 Sep 60",
   "status": "Canceled, 14 December 1999",
   "newest": "Notice 3 - Cancellation, 14 December 1999",
   "superseding": "SAE-AS3582",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5331-00-143-6875, o-ring, MS9068-120 (Los Angeles)"
   ],
   "files": {
    "package": "MS9068 package.pdf",
    "scan": "MS9068 legacy scan.pdf",
    "clean": "MS9068 clean copy.pdf",
    "record": "MS9068 validation record.pdf",
    "sheet": "MS9068 3D model.pdf",
    "parts": "MS9068 parts list.pdf",
    "inspection": "MS9068 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS9068-228-freecad.png",
    "pair": "Models/views/MS9068-228-pair.png",
    "record": "Models/views/MS9068-228-record.png",
    "front": "Models/views/MS9068-228-front.png",
    "top": "Models/views/MS9068-228-top.png",
    "right": "Models/views/MS9068-228-right.png",
    "cut": "Models/views/MS9068-228-cut.png"
   },
   "shown_part": "MS9068-228",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid toroidal O-rings, one for each of the 229 part numbers MS9068-004 to -460, at the middle of the ID and T limits, with the ring axis along X.",
   "not_modeled": [
    "The parting-line flash and step (.005 max wide, .003 max deep) are not modeled; the section is a perfect circle.",
    "Material (silicone rubber AMS 3304), identification and packaging per AMS 2817, and approximate weight are not modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 9cba0f9e7229.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "352 of 1,906 items agreed. 51 differences went to a third reader. A second pass settled 3 from the same value on another sheet of the series, 1 from a second printing in the document, 1 from the sheet's layout (a point the scan did not print). 2 readings remain open. 1 value that the scan prints in a doubtful form is listed for the engineer. 3 marks outside the technical content are kept as transcription notes.",
     "result": "2 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "1,933 checks on size series and limits. 206 breaks checked against the scan: all are as printed. 916 values are also printed on 3 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 1 table (1,603 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "229 solids in STEP AP242. 1,144 of 1,145 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Notice 3 - Cancellation, 14 December 1999.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 1, row MS9068-137, APPROX WEIGHT LBS/100: read as .259, could be .239.",
    "Open reading. Page 1, row MS9068-239, APPROX WEIGHT LBS/100: read as .822, could be .622.",
    "Printed value to confirm. The figure note on sheet 1 reads \"ALL DIAMETERS OF CROSS SECTION MUST EQUAL T EXCEPT AS SHOWN\", and the last letter of \"OF\" prints with a closed upper loop like a P. The same lettering prints every F of \"FOR REFERENCE PURPOSES ONLY\" on sheet 2 with the same closed loop, so the scan prints F and P alike in this typeface.",
    "Model. For MS9068-278 the table prints a basic volume of .5579 cu in, but its printed ID (11.954 to 12.014) and T (.135 to .143) give .5779 cu in, which also fits the volumes of -277 (.5541) and -279 (.6256) and its own approximate weight of 2.658 lb per 100. The engineer must decide whether .5579 is a printing error for .5779."
   ]
  },
  {
   "id": "QQ-B-637a",
   "slug": "qq-b-637a",
   "title": "Brass, naval: rod, wire, shapes, forgings, and flat products with finished edges (bar, flat wire, and strip)",
   "class": "Los Angeles",
   "folder": "Los Angeles/QQ-B-637a Brass, naval-rod",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "March 14, 1967",
   "status": "Canceled, 24 May 1993",
   "newest": "Revision A Notice 2 - Cancellation, 24 May 1993",
   "superseding": "Portions of ASTM-B21, and ASTM-B21M, ASTM-B124 and ASTM-B283",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5315-01-497-1095, pin, straight, headless, QQ-B-637, ALLOY 464, COND 1/2 HD (Los Angeles)"
   ],
   "files": {
    "package": "QQ-B-637a package.pdf",
    "scan": "QQ-B-637a legacy scan.pdf",
    "clean": "QQ-B-637a clean copy.pdf",
    "record": "QQ-B-637a validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, all scanned. SHA-256 01f65a1e7661.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,961 of 4,097 items agreed. All 40 differences were settled against the page image. A second pass settled 1 from the document's record in ASSIST, 1 from a second printing in the document, 1 from the sheet's layout (a point the scan did not print).",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "132 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "15 pages of searchable text, 10 tables (522 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "QQ-B-637a is the federal material specification for leaded and nonleaded naval brass (copper alloys 462, 464, 482 and 485) rod, wire, shapes, forgings and flat products with finished edges and has no drawing: it sets forms and tempers (1.2.2), chemical composition (Table I), mechanical properties by form, temper and size for each alloy (Tables II to IV), straightness limits and maximum span lengths for rod for special shafting (Tables V and VI), a default tolerance of plus or minus 3/32 inch on smooth and 1/32 inch on rough machined open die forgings (3.8.1), sampling for chemical analysis (Table VII), tests and packaging, and leaves product sizes and forging dimensions to the order (6.2) and the dimensional tolerances of the other forms to Fed. Std. No. 146 (3.8.3), which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 2 - Cancellation, 24 May 1993.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "QQ-N-281D",
   "slug": "qq-n-281d",
   "title": "Nickel-copper alloy bar, rod, plate, sheet, strip, wire, forgings, and structural and special shaped sections",
   "class": "Los Angeles",
   "folder": "Los Angeles/QQ-N-281D Nickel-copper alloy bar, rod",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 30,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "August 26, 1974",
   "status": "Active, 23 December 2020",
   "newest": "Revision D Notice 1 - Validation, 23 December 2020",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1,
    "Ohio": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5305-00-256-9459, setscrew, QQ-N-281 (Los Angeles, Ohio, Seawolf)"
   ],
   "files": {
    "package": "QQ-N-281D package.pdf",
    "scan": "QQ-N-281D legacy scan.pdf",
    "clean": "QQ-N-281D clean copy.pdf",
    "record": "QQ-N-281D validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "30 pages, all scanned. SHA-256 7c7a68b7d055.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "6,949 of 7,159 items agreed. 131 differences went to a third reader. 1 reading remains open. 1 value that the scan prints in a doubtful form is listed for the engineer.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "704 checks on size series and limits. 50 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "26 pages of searchable text, 34 tables (1,560 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "QQ-N-281D is the federal material specification for nickel-copper alloy in class A (bar and rod, forged parts, shapes, sheet, strip, plate and wire) and class B (bar and rod, and wire) and has no drawing: it sets the chemical composition (Table I), mechanical properties, grain size and hardness by condition and size range (Tables II to VIII, with an untitled Brinell to Rockwell B conversion for plate and untitled information-only hardness values for class B material), permissible variations in diameter, thickness, width, length, straightness and weight by size range (Tables IX to XXVI), the type of edge for strip by thickness and width (an untitled table), machining allowances for hot finished material (Table XXVII), sampling (Tables XXVIII and XXIX) and ultrasonic reference hole diameters (Tables XXX and XXXI), and it leaves the size and shape of every bar, rod, shape, sheet, strip, plate, wire and forged part to the contract or order (1.2, 3.7.1, 3.9.1, 6.2), so the one linked stock number, 5305-00-256-9459 (setscrew), takes only its material from this document.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 23 December 2020. ASSIST also holds Revision D Interim Amendment (21 January 1981) and Revision D Amendment 2 (23 October 1985). They were issued after this revision and are not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. The page breaks this word at the end of a line with a hyphen, so whether it is written with a hyphen cannot be seen; it is kept as read.",
    "Open reading. Page 26, paragraph 5.1, the reference after 'as specified': read as 6.2, could be 6.1.",
    "Printed value to confirm. Table IX, rounds: the scan prints a minus variation of 0.003 inch for rounds under 1/2 inch and 0.002 inch for 1/2 to 15/16 inch, incl., then 0.003 to 0.007 rising with size; the 1/2 to 15/16 value is tighter than both neighbours."
   ]
  },
  {
   "id": "QQ-N-286H",
   "slug": "qq-n-286h",
   "title": "Nickel-copper-aluminum alloy, wrought (UNS N05500)",
   "class": "Los Angeles",
   "folder": "Los Angeles/QQ-N-286H Nickel-copper-aluminum alloy, wrought",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 42,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "July 6, 2026",
   "status": "Active, 6 July 2026",
   "newest": "Revision H, 6 July 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "5315-01-497-1176, key, machine, QQ-N-286,FORM 2, COND ANL,HF,AH (Los Angeles)"
   ],
   "files": {
    "package": "QQ-N-286H package.pdf",
    "scan": "QQ-N-286H legacy scan.pdf",
    "clean": "QQ-N-286H clean copy.pdf",
    "record": "QQ-N-286H validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "42 pages, 2 scanned. SHA-256 0ae8cfb2f29d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "12,780 of 12,836 items agreed. All 30 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "562 checks on size series and limits. 23 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "34 pages of searchable text, 24 tables (1,237 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "QQ-N-286H is a material specification for nickel-copper-aluminum alloy UNS N05500 bar, rod, sheet, strip, wire, plate and forgings that sets composition, mechanical properties, tests, inspection and mill-product tolerances on diameter, thickness, width, length, straightness and weight (Tables VII to XXII), with no drawing of a part; its only dimensioned figure, Figure 1, is the notched slow strain rate test specimen, not a part.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H, 6 July 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table XXII, column 'Machining allowances (inch) 2/ / Diameter': 0.25 then 0.005. Page 23 prints 0.250 for finish A over 3.812 and 0.005 for finish D 0.500 to 0.875, incl; the series restarts at the finish D group, but the printed 0.005 itself looks wrong for its series, an order of magnitude below the 0.062 for the next finish D size and the 0.062 minimum of finish E, a point for an engineer."
   ]
  },
  {
   "id": "W-L-111c",
   "slug": "w-l-111c",
   "title": "Lamp, incandescent, (electric, miniature, tungsten-filament)",
   "class": "Los Angeles",
   "folder": "Los Angeles/W-L-111c Lamp, incandescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "February 11, 1958",
   "status": "Canceled, 15 April 1991",
   "newest": "Revision C Notice 1 - Cancellation, 15 April 1991",
   "superseding": "",
   "preparing_activity": "San Antonio Air Logistics Center (S/S by AF 99)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "W-L-111c package.pdf",
    "scan": "W-L-111c legacy scan.pdf",
    "clean": "W-L-111c clean copy.pdf",
    "record": "W-L-111c validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, all scanned. SHA-256 a88fac217453.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,927 of 4,934 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 2 tables (16 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "W-L-111c is the general specification for miniature tungsten-filament incandescent lamps for automotive, flashlight and similar service that has no drawing or dimension table: it holds each lamp to the manufacturer's standard bulb shapes, sizes and finishes, filament forms, and leading-in wire and base types on file at the National Bureau of Standards (3.1), sets life, efficiency and candlepower-maintenance requirements against the Annual Supplement schedules of commercial ratings (3.2), gives life and candlepower-maintenance tolerances by the number of lamps tested (Tables I and II), an Army minimum mortality curve (Figure 1) and a photograph of the impact tester (Figure 2), defines the reference planes and light centers for measuring headlight lamps (4.5.2 to 4.6.3), and sends physical dimensions and their tolerances to the Annual Supplement schedules (4.5.1), which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 1 - Cancellation, 15 April 1991. ASSIST also holds Revision C Amendment 7 (23 June 1966). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "W-L-116a",
   "slug": "w-l-116a",
   "title": "Lamps, fluorescent",
   "class": "Los Angeles",
   "folder": "Los Angeles/W-L-116a Lamps, fluorescent",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 11,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "OCTOBER 6, 1958",
   "status": "Active, 23 June 1964",
   "newest": "Revision A Amendment 3, 23 June 1964",
   "superseding": "",
   "preparing_activity": "General Services Administration",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "6240-00-152-2996, lamp, fluorescent, W-L-116 (Los Angeles)"
   ],
   "files": {
    "package": "W-L-116a package.pdf",
    "scan": "W-L-116a legacy scan.pdf",
    "clean": "W-L-116a clean copy.pdf",
    "record": "W-L-116a validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "11 pages, all scanned. SHA-256 71e08d60e426.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,950 of 3,972 items agreed. 10 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "47 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 6 tables (286 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "W-L-116a is the federal specification for fluorescent lamps for general lighting service that has no drawing: it lists 26 size and color combinations of preheat (6 to 90 watt) and instant-start (48 to 96 inch) lamps by nominal watts or length, bulb designation (T-5 to T-17), base (miniature, medium or mogul bipin, single pin), rated life and lumens (Table I), gives only overall length limits, a maximum face-to-face length and maximum and minimum face to end of pin lengths for the 15, 20, 40 and 90 watt bipin lamps (Table IIa) and maximum and minimum lengths over the ends of opposite pins for the 72 and 96 inch T-8 and the 48 and 96 inch T-12 single-pin lamps (Table IIb), names bulbs and bases by designation only with no diameter, base or pin dimension and gives no dimension at all for the 6 and 8 watt T-5 lamps, sets chromaticity coordinates (Table III) and life and lumen-maintenance tolerances by the number of lamps tested (Tables IV and V), and sends the remaining dimensions to American Standard C78 (3.5), which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Amendment 3, 23 June 1964. ASSIST also holds Revision A Amendment 3 (23 June 1964). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table I, The six instant-start rows 37 (72\") and 49 (96\"), column Lamp size / Nominal watts, footnote marker: read as \u00b3, could be \u00b2."
   ]
  },
  {
   "id": "W-L-126a",
   "slug": "w-l-126a",
   "title": "Lamp, incandescent, projection",
   "class": "Los Angeles",
   "folder": "Los Angeles/W-L-126a Lamp, incandescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 15,
   "dimensions": 175,
   "dimensions_met": 175,
   "kind": "Federal specification",
   "dated": "FEBRUARY 27, 1959",
   "status": "Canceled, 20 March 1984",
   "newest": "Revision A Notice 1 - Cancellation, 20 March 1984",
   "superseding": "",
   "preparing_activity": "General Services Administration (Federal Supply Service) (S/S by FAS)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "6240-00-752-2050, lamp, incandescent, W-L-126 (Los Angeles, Seawolf)"
   ],
   "files": {
    "package": "W-L-126a package.pdf",
    "scan": "W-L-126a legacy scan.pdf",
    "clean": "W-L-126a clean copy.pdf",
    "record": "W-L-126a validation record.pdf",
    "sheet": "W-L-126a 3D model.pdf",
    "parts": "W-L-126a parts list.pdf",
    "inspection": "W-L-126a inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 7",
   "pictures": {
    "iso": "Models/views/W-L-126_DEC-freecad.png",
    "pair": "Models/views/W-L-126_DEC-pair.png",
    "record": "Models/views/W-L-126_DEC-record.png",
    "front": "Models/views/W-L-126_DEC-front.png",
    "top": "Models/views/W-L-126_DEC-top.png",
    "right": "Models/views/W-L-126_DEC-right.png",
    "cut": "Models/views/W-L-126_DEC-cut.png"
   },
   "shown_part": "W-L-126 DEC",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 15 projection lamps of Table I, one for each ASA code row: a tubular bulb at its maximum diameter with a domed end, at the maximum overall length, on the base its figure dimensions, with the bayonet pins (figure 1), the mogul prefocus flange and its two lugs (figure 2), the medium prefocus flange (figures 3 and 4), the double-contact ring with its flats, notch and two contacts (figure 5) and the special prefocus indexing ring (figure 6).",
   "not_modeled": [
    "The filament, its supports and the inside of the lamp: the bulbs are solid, so the filament height H and width W (millimeters, maximum), the light center lengths (1-3/8 \u00b1 3/64, 3-7/16 \u00b1 1/16, 2-3/16 \u00b1 1/32, 2.187 \u00b1 .030, 3.500 \u00b1 .020 and 2-5/16 \u00b1 1/32) and the .030 centering of the source on the base axis are recorded as parameters only.",
    "The opaque tops and ends (note 3 of figure 1, 19/32 \u00b1 1/8, and the 1-1/8 \u00b1 1/4 OPAQUE END of figures 4 and 6) and the identification marking, which are coatings and print, not shape.",
    "The taper of the base shells (.006 per 2 in. of length on the mogul base, .0172 per side per 2 in. on the medium base), the bead at the end of each shell and the .125 REF heights: the shells are cylinders at the diameter given at the .500 datum.",
    "The two lugs of the medium prefocus flange (80\u00b0 and 60\u00b0 with half angles of 40\u00b0 and 30\u00b0 in figures 3 and 4): neither figure gives the flange diameter between the lugs, so the flange is a full disc of 1.328 diameter.",
    "The rivets, the four slots and the 90\u00b0 \u00b1 15\u00b0 and 55\u00b0 NOM angles of the double-contact ring (figure 5), and the boat shape of its terminals, whose shape note 4 leaves optional; the contacts are round at the .250 contact area.",
    "The plate, serrations and tab (.250-.002 wide, 718 REF high) of the preferred indexing ring of figure 6, which note 4 lets an interchangeable ring replace, and the stepped shape of the special prefocus base below the ring.",
    "The rounded shoulders and necks of the bulbs and the insulator cones, which the figures draw without dimensions.",
    "The ratings of Table I and the figure tables (watts, filament, average life, cooling), the light output and tolerances of Tables II to IV, and the packaging of section 5, which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, all scanned. SHA-256 e81d3fe7a180.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,991 of 3,001 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "65 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 10 tables (369 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "15 solids in STEP AP242. 175 of 175 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 1 - Cancellation, 20 March 1984. ASSIST also holds Revision A Amendment 1 (17 August 1961). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The figures give the shell taper (.006 per 2 in. of length on the mogul base, .0172 per side per 2 in. on the medium base) without showing which end of the shell is larger; the solids carry straight shells at the diameter given at the .500 datum.",
    "Model. Figure 6 gives no diameter for the special prefocus base below the indexing ring or for the neck above it, no ring thickness and no position or thickness for the .250-.002 tab, so the solids carry scaled values and an engineer needs the base standard before using them for a socket fit.",
    "Model. View A-A of figure 5 prints .094 \u00b1 .010 across two short parallel lines at the edge of the ring without saying what it measures; the solids take it as the ring thickness.",
    "Model. The figure 1 table gives FIIN 542-6658 for CMT and the figure 4 table gives the same FIIN for CVX, two different lamps."
   ]
  },
  {
   "id": "ZZ-H-521F",
   "slug": "zz-h-521f",
   "title": "Hose and hose assemblies, nonmetallic, spray",
   "class": "Los Angeles",
   "folder": "Los Angeles/ZZ-H-521F Hose and hose assemblies, nonmetallic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "May 28, 1993",
   "status": "Canceled, 16 August 2001",
   "newest": "Revision F Notice 1 - Cancellation, 16 August 2001",
   "superseding": "A-A-59613",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Los Angeles": 1
   },
   "stock_examples": [
    "4720-00-289-3429, hose assembly, nonmetallic, ZZ-H-521 (Los Angeles)"
   ],
   "files": {
    "package": "ZZ-H-521F package.pdf",
    "scan": "ZZ-H-521F legacy scan.pdf",
    "clean": "ZZ-H-521F clean copy.pdf",
    "record": "ZZ-H-521F validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, all scanned. SHA-256 c66a31718390.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,782 of 4,065 items agreed. All 63 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "81 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 6 tables (226 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "ZZ-H-521F is the federal specification for textile reinforced nonmetallic spray hose and hose assemblies in six inside diameters from 0.25 to 1.00 inch (1.2; size codes 025 to 100, Table III) and has no dimensioned part drawing: Table I gives the inside diameter tolerance (plus or minus 0.03 inch, 0.06 inch for the 1.00 inch size), a 0.023 inch minimum cover thickness, the minimum number of reinforcement plies and tensile, elongation, aging, adhesion and hydrostatic test values, the table under 3.5.1 gives B, the minimum bore where the inner tube bulges at a coupling (0.20 to 0.90 inch), and Figure 1 letters only B and ID on an otherwise undimensioned coupled hose end, while no outside diameter, tube or ply thickness or coupling dimension is given (4.5.2 uses 0.039 inch only as the tube thickness below which plate test specimens may be used) and the order sets the coupling and thread type (3.5) and the length (3.7, 50 feet maximum, plus or minus 1 percent), so no part's shape is fixed.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision F Notice 1 - Cancellation, 16 August 2001.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-50179C",
   "slug": "a-a-50179c",
   "title": "Pans, with or without covers, food serving, rectangular, soup tureen and round insets for hot food tables and cold food counters",
   "class": "Ohio",
   "folder": "Ohio/A-A-50179C Pans, with or without covers",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "September 21, 2015",
   "status": "Active, 21 September 2015",
   "newest": "Revision C, 21 September 2015",
   "superseding": "",
   "preparing_activity": "DLA Troop Support - Subsistence Items of Supply",
   "stock_numbers": 2,
   "by_class": {
    "Ohio": 2
   },
   "stock_examples": [
    "7310-00-238-5164, pan, steam table, A-A-50179 (Ohio)",
    "7310-00-834-4485, pan, steam table, A-A-50179 (Ohio)"
   ],
   "files": {
    "package": "A-A-50179C package.pdf",
    "scan": "A-A-50179C legacy scan.pdf",
    "clean": "A-A-50179C clean copy.pdf",
    "record": "A-A-50179C validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 c3048540ff03.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,389 of 1,393 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "26 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (99 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-50179 is a commercial item description with no drawing: for each pan, tureen and inset size it gives only capacity in quarts and outside depth, plus the 11-7/8 by 19-7/8 inch table opening the pan fractions must fill, so no figure or table fixes the pan shape.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C, 21 September 2015.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-59125/18",
   "slug": "a-a-59125-18",
   "title": "Terminal board, molded, barrier, stud type, class 13TB",
   "class": "Ohio",
   "folder": "Ohio/A-A-59125_18 Terminal board, molded",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 3,
   "dimensions": 149,
   "dimensions_met": 149,
   "kind": "Commercial item description sheet",
   "dated": "03 June 2011",
   "status": "Active, 20 March 2023",
   "newest": "Notice 2 - Validation, 20 March 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Ohio": 2
   },
   "stock_examples": [
    "5940-00-893-7485, terminal board, A-A-59125 (Ohio)",
    "5940-01-525-9468, terminal board, A-A-59125//1 (Ohio)"
   ],
   "files": {
    "package": "A-A-59125_18 package.pdf",
    "scan": "A-A-59125_18 legacy scan.pdf",
    "clean": "A-A-59125_18 clean copy.pdf",
    "record": "A-A-59125_18 validation record.pdf",
    "sheet": "A-A-59125_18 3D model.pdf",
    "parts": "A-A-59125_18 parts list.pdf",
    "inspection": "A-A-59125_18 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/13TB4_alternate_design-freecad.png",
    "pair": "Models/views/13TB4_alternate_design-pair.png",
    "record": "Models/views/13TB4_alternate_design-record.png",
    "front": "Models/views/13TB4_alternate_design-front.png",
    "top": "Models/views/13TB4_alternate_design-top.png",
    "right": "Models/views/13TB4_alternate_design-right.png",
    "cut": "Models/views/13TB4_alternate_design-cut.png"
   },
   "shown_part": "13TB4 alternate design",
   "application": "FreeCAD 1.1.4",
   "modeled": "Three solids: the 13TB4 terminal board in its primary design (molded base with four molded-in No. 8-32 studs and four terminal strips) and in its alternate design (studs with collars and molded barriers), and the terminal nut of Detail B.",
   "not_modeled": [
    "Thread form on the studs and in the strips and nuts, the stud end chamfers, and the strip bend radii.",
    "The round-head screw heads, collars and stud lengths inside the molded base, and the strip seats, which merge with the plastic.",
    "The marking (0.188 high letters recessed 0.031), the cavity number and the manufacturer's monogram.",
    "The terminal nuts on the studs: the nut is a separate solid and the boards are modeled without nuts.",
    "The recommended L-80 (MIL-T-16366) and SAE-AS17143 -1, -2, -3 lugs, the plastic material and the electrical ratings."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 f2d77a1ac113.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "224 of 228 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "48 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (82 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "3 solids in STEP AP242. 149 of 149 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Notice 2 - Validation, 20 March 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Section A-A on both designs starts the 0.500 thickness at the strip or collar surface, 0.023 above the molded face, while the elevations draw the molded base itself about 0.500 thick; an engineer should confirm whether the molded base is 0.477 or 0.500 thick."
   ]
  },
  {
   "id": "A-A-59439B",
   "slug": "a-a-59439b",
   "title": "Coupling halves, quick-disconnect",
   "class": "Ohio",
   "folder": "Ohio/A-A-59439B Coupling halves, quick-disconnect",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 10,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "2 February 2017",
   "status": "Active, 2 February 2017",
   "newest": "Revision B, 2 February 2017",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 4,
   "by_class": {
    "Ohio": 3,
    "Seawolf": 1
   },
   "stock_examples": [
    "4730-00-489-6303, coupling half, quick disconnect, A-A-59439 (Ohio)",
    "4730-00-494-3271, coupling half, quick disconnect, A-A-59439 (Ohio)",
    "4730-00-494-3273, coupling half, quick disconnect, A-A-59439 (Ohio)",
    "4730-01-423-8761, coupling half, quick disconnect, A-A-59439 (Seawolf)"
   ],
   "files": {
    "package": "A-A-59439B package.pdf",
    "scan": "A-A-59439B legacy scan.pdf",
    "clean": "A-A-59439B clean copy.pdf",
    "record": "A-A-59439B validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "10 pages, 0 scanned. SHA-256 4e8f197ec7f6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,046 of 2,101 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "260 checks on size series and limits. 8 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 5 tables (333 cells), 8 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-59439B is a commercial item description for quick-disconnect coupling halves that sets types, classes, styles, materials, engagement, leakage, crush and tensile loads, marking and a part-number scheme, and gives only nominal NPT and hose ID size codes (Table II) and hose OD codes (Table III); Figures 1 to 8 are undimensioned outline drawings of typical halves, and each half is to conform to the producer's own drawings.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B, 2 February 2017.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table III, column 'Size (inches)': 1.375 then 1.343. Page 3 prints 1.343 for code 45 (1-13/32), the same decimal as code 43; 1-13/32 is 1.406, so the printed decimal looks wrong for its series, a point for an engineer."
   ]
  },
  {
   "id": "AN818 Rev 20 w/AMENDMENT 4",
   "slug": "an818-rev-20-w-amendment-4",
   "title": "Nut, tube coupling, short",
   "class": "Ohio",
   "folder": "Ohio/AN818 Rev 20 w_AMENDMENT 4 Nut, tube coupling",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 5,
   "solids": 15,
   "dimensions": 330,
   "dimensions_met": 330,
   "kind": "Detail specification sheet",
   "dated": "26 September 2024",
   "status": "Active, 26 September 2024",
   "newest": "Revision 20 Amendment 4 (all previous amendments incorporated), 26 September 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-540-4363, nut, tube coupling, AN818-2C (Ohio)"
   ],
   "files": {
    "package": "AN818 Rev 20 w_AMENDMENT 4 package.pdf",
    "scan": "AN818 Rev 20 w_AMENDMENT 4 legacy scan.pdf",
    "clean": "AN818 Rev 20 w_AMENDMENT 4 clean copy.pdf",
    "record": "AN818 Rev 20 w_AMENDMENT 4 validation record.pdf",
    "sheet": "AN818 Rev 20 w_AMENDMENT 4 3D model.pdf",
    "parts": "AN818 Rev 20 w_AMENDMENT 4 parts list.pdf",
    "inspection": "AN818 Rev 20 w_AMENDMENT 4 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/AN818-12-freecad.png",
    "pair": "Models/views/AN818-12-pair.png",
    "record": "Models/views/AN818-12-record.png",
    "front": "Models/views/AN818-12-front.png",
    "top": "Models/views/AN818-12-top.png",
    "right": "Models/views/AN818-12-right.png",
    "cut": "Models/views/AN818-12-cut.png"
   },
   "shown_part": "AN818-12",
   "application": "FreeCAD 1.1.4",
   "modeled": "15 short tube coupling nuts, one per dash number AN818-2 to AN818-48 in the undrilled form: hex P with 15 degree flanks down to diameter C at both ends, corner radius R at the tube end and 45 degree chamfer N at the thread end, bore A with 45 degree chamfers U, the shoulder at L with its .010 corner radius, thread T for the length S max and the 90 degree countersink H; the material designator and the N dry film suffix do not change the shape.",
   "not_modeled": [
    "Lockwire holes of the L-coded part (drilled through the hex near the thread end): their size and location are in SAE-AS1043 (note 7), not on this sheet.",
    "Thread form, pitch and class 3B limits of SAE AS8879; thread T is a plain cylinder at the basic major diameter.",
    "The radius or break of .005 +.005 -.000 on all other corners (note 4), the identifying number, materials and finishes (table I), heat treatment and the dry film lubricant."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 1 scanned. SHA-256 ce3a42f18e4e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "787 of 835 items agreed. 18 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "42 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 4 tables (333 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "15 solids in STEP AP242. 330 of 330 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision 20 Amendment 4 (all previous amendments incorporated), 26 September 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table I, row 9 (T 6/), column 3 (Alloy): read as 6Al-4V, could be 6AI-4V."
   ]
  },
  {
   "id": "AN832",
   "slug": "an832",
   "title": "Union - flared tube, 3/8 bulkhead and universal",
   "class": "Ohio",
   "folder": "Ohio/AN832 Union - flared tube, 3-8 bulkhead and universal",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 2,
   "solids": 91,
   "dimensions": 637,
   "dimensions_met": 637,
   "kind": "Air Force-Navy aeronautical standard",
   "dated": "2 Aug 83",
   "status": "Canceled, 1 February 2000",
   "newest": "Revision 8 Notice 1 - Cancellation, 1 February 2000",
   "superseding": "SAE-AS5406",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-510-7192, adapter, straight, tube to boss, AN832-6J (Ohio)"
   ],
   "files": {
    "package": "AN832 package.pdf",
    "scan": "AN832 legacy scan.pdf",
    "clean": "AN832 clean copy.pdf",
    "record": "AN832 validation record.pdf",
    "sheet": "AN832 3D model.pdf",
    "parts": "AN832 parts list.pdf",
    "inspection": "AN832 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/AN832-10-freecad.png",
    "pair": "Models/views/AN832-10-pair.png",
    "record": "Models/views/AN832-10-record.png",
    "front": "Models/views/AN832-10-front.png",
    "top": "Models/views/AN832-10-top.png",
    "right": "Models/views/AN832-10-right.png",
    "cut": "Models/views/AN832-10-cut.png"
   },
   "shown_part": "AN832-10",
   "application": "FreeCAD 1.1.4",
   "modeled": "91 bulkhead unions, one per AN832 part number (dash numbers -2 to -32 in each of the seven material codes; material does not change the geometry): hex, universal end, 1/32 shoulder, thread relief and lengthened bulkhead end.",
   "not_modeled": [
    "Thread form and the MS33656/MS33657 style E fitting-end details (flare seat dimensions, bore, sleeve pilot, hex tolerances and chamfers), which this sheet refers out and does not give.",
    "Finish, material properties and edge breaks."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 785997de726c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "391 of 422 items agreed. 15 differences went to a third reader. A second pass settled 1 from a second printing in the document, 2 from a closer look at the page, 1 from the document's record in ASSIST. 2 readings remain open. 1 value that the scan prints in a doubtful form is listed for the engineer.",
     "result": "2 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "34 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (78 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "91 solids in STEP AP242. 637 of 637 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision 8 Notice 1 - Cancellation, 1 February 2000.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Page 2 table, K for AN832-12 and AN832-16 (one cell shared by both rows): the scan prints 1, a full-height slash, then 3/4, where every other H and K cell prints a short hyphen between the whole number and the fraction. It is read as 1-3/4; confirm the value.",
    "Open reading. Page 2, row 12, column 6: read as 1-31/32, could be 1-21/32.",
    "Open reading. Page 2, row 13, column 6: read as 2- 5/32, could be 2- 3/32."
   ]
  },
  {
   "id": "AN914 Rev 11 w/AMENDMENT 1",
   "slug": "an914-rev-11-w-amendment-1",
   "title": "Elbow, pipe, internal and external thread, 90\u00b0",
   "class": "Ohio",
   "folder": "Ohio/AN914 Rev 11 w_AMENDMENT 1 Elbow, pipe",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 98,
   "dimensions": 1666,
   "dimensions_met": 1666,
   "kind": "Detail specification sheet",
   "dated": "1 March 2018",
   "status": "Inactive, 1 March 2018",
   "newest": "Revision 11 Amendment 1 (amendment incorporated), 1 March 2018",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-497-1706, elbow, pipe, AN914-3K (Ohio)"
   ],
   "files": {
    "package": "AN914 Rev 11 w_AMENDMENT 1 package.pdf",
    "scan": "AN914 Rev 11 w_AMENDMENT 1 legacy scan.pdf",
    "clean": "AN914 Rev 11 w_AMENDMENT 1 clean copy.pdf",
    "record": "AN914 Rev 11 w_AMENDMENT 1 validation record.pdf",
    "sheet": "AN914 Rev 11 w_AMENDMENT 1 3D model.pdf",
    "parts": "AN914 Rev 11 w_AMENDMENT 1 parts list.pdf",
    "inspection": "AN914 Rev 11 w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/AN914-4-freecad.png",
    "pair": "Models/views/AN914-4-pair.png",
    "record": "Models/views/AN914-4-record.png",
    "front": "Models/views/AN914-4-front.png",
    "top": "Models/views/AN914-4-top.png",
    "right": "Models/views/AN914-4-right.png",
    "cut": "Models/views/AN914-4-cut.png"
   },
   "shown_part": "AN914-4",
   "application": "FreeCAD 1.1.4",
   "modeled": "98 solids, one per AN914 part number: the 7 dash numbers -1 to -10 (1/8 to 1-1/4 pipe thread) in each of the eight Table I material codes, and with oxygen code A for every code but T and BC; material does not change the geometry. Each solid is the 90 degree elbow of figure 1: female leg of diameter P with the tapped bore, drill K and outer corner radius V, male thread leg, inside corner radius W, L-shaped wrench pads C across, and the male leg drill.",
   "not_modeled": [
    "Pipe thread form and taper of SAE-AS71051 and the SAE-AS5201 style A fitting end (thread length, chamfers, relief), which the sheet refers out; both threads are plain cylinders.",
    "The crown and back of the forging away from the V corner, forging draft, the radii at the wrench pad corners and the PIN marking location, which the figure draws but does not dimension.",
    "Edge breaks (note 4), surface finish (note 5), material, finish and oxygen cleaning (Table I and the oxygen code), which do not change the shape.",
    "The maximum weight by material is not checked: it rests on the forging's undimensioned surfaces and on densities the sheet does not give. At the densities used here the solids weigh 9 percent under to 8 percent over the sheet's maximum (weight_lb against weight_max_lb in each part's parameters)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 05bf4d8f4888.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,271 of 1,312 items agreed. All 16 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "92 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 7 tables (453 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "98 solids in STEP AP242. 1,666 of 1,666 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision 11 Amendment 1 (amendment incorporated), 1 March 2018.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The PIN examples call AN914-1WV and AN914-1WA 1/2-14 ANPT elbows, but figure 1 gives dash 1 as 1/8-27 and dash 4 as 1/2-14; the solids follow figure 1."
   ]
  },
  {
   "id": "MIL-C-24217/7(SH)",
   "slug": "mil-c-24217-7-sh",
   "title": "Plug assemblies, straight",
   "class": "Ohio",
   "folder": "Ohio/MIL-C-24217_7(SH) Plug assemblies, straight",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 22,
   "solids": 70,
   "dimensions": 556,
   "dimensions_met": 555,
   "kind": "Military specification sheet",
   "dated": "5 September 1984",
   "status": "Canceled, 13 July 1999",
   "newest": "Notice 2 - Cancellation, 13 July 1999",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5935-01-528-5016, connector, plug, electrical, M24217/7-011 (Ohio)"
   ],
   "files": {
    "package": "MIL-C-24217_7(SH) package.pdf",
    "scan": "MIL-C-24217_7(SH) legacy scan.pdf",
    "clean": "MIL-C-24217_7(SH) clean copy.pdf",
    "record": "MIL-C-24217_7(SH) validation record.pdf",
    "sheet": "MIL-C-24217_7(SH) 3D model.pdf",
    "parts": "MIL-C-24217_7(SH) parts list.pdf",
    "inspection": "MIL-C-24217_7(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M24217_7-071-freecad.png",
    "pair": "Models/views/M24217_7-071-pair.png",
    "record": "Models/views/M24217_7-071-record.png",
    "front": "Models/views/M24217_7-071-front.png",
    "top": "Models/views/M24217_7-071-top.png",
    "right": "Models/views/M24217_7-071-right.png",
    "cut": "Models/views/M24217_7-071-cut.png"
   },
   "shown_part": "M24217/7-071",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the 70 component parts of the straight plug assemblies, each sized at the middle of its two table limits: 15 plug shells (Figures 2 and 3), 11 coupling rings (Figure 4), 15 front insulators (Figures 5 and 6), 7 rear insulators (Figure 9), 11 protective caps (Figure 10), 4 socket contacts (Figure 11) and 7 thrust washers (Figure 12).",
   "not_modeled": [
    "Plug assemblies M24217/7-001 to -023 (Table I), which combine these parts with MS17804 contacts, AS-568A O-rings, Spirolox retaining rings, an optional MS20995 lock wire and a molded elastomeric boot.",
    "Contact holes in the front and rear insulators, whose positions MIL-C-24217/1 pages 4 to 6 give: Table V D, F, G and H, Table VI C, E, F, G, H, J and K, Table VII D (type 2), E, F, G, H, J and K, and the hole callouts of Figures 5 and 6; also the contact markings of Figures 7 and 8.",
    "The marking slot of the front insulators: angle J and length K of Table V, angle L and length M of Table VI, and the .030/.034, .063/.065 and .050/.055 callouts.",
    "Plug shell keyways, slots and the coined, welded or brazed key pin: Table II L, M, N, P and S, Table III M, N, P, S, U, V, W and X, and the .115/.118, .068/.083, .0625/.0560, .135/.155 and .057/.067 callouts.",
    "Plug shell features Figures 2 and 3 locate by fixed values that the model does not place: the rear groove at .213/.223 (.012/.014 wide) and .338/.348, Table II H, and the .305/.310, .310/.315 and .143/.148 lengths of Figure 2.",
    "Coupling ring knurl length H and the three .062 lockwire holes located 3/32 from the outside diameter, whose direction Figure 4 does not show.",
    "Socket contact taper and slots: F (after tapering), G (before taper), slot width K with four or six slots, the 30 degree taper, and the solder pot, whose dimensions MIL-C-24217 gives.",
    "The cut through the thrust washer, which Figure 12 shows but does not dimension.",
    "Chamfers, edge breaks, corner radii, knurls, markings, surface finish and the geometric tolerances (runout, flatness, parallelism, perpendicularity, true position)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "22 pages, all scanned. SHA-256 126861eaeb1c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,335 of 2,792 items agreed. 457 differences went to a third reader. A second pass settled 2 from the sheet's layout (a point the scan did not print). 81 readings remain open. 2 marks outside the technical content are kept as transcription notes.",
     "result": "81 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "648 checks on size series and limits. 77 breaks checked against the scan: 76 as printed, 1 doubtful on the page and listed as open.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 10 tables (2,304 cells), 12 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "70 solids in STEP AP242. 555 of 556 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Notice 2 - Cancellation, 13 July 1999.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table II, M24217/7-025 lower value, column F: read as 1.219, could be 1.279.",
    "Open reading. Table II, M24217/7-026 upper value, column G: read as .933, could be .533.",
    "Open reading. Table II, M24217/7-026 upper value, column K: read as .890, could be .850.",
    "Open reading. Table II, M24217/7-026 lower value, column G: read as .931, could be .531.",
    "Open reading. Table II, M24217/7-026 lower value, column L: read as .295, could be .235.",
    "Open reading. Table II, M24217/7-026 lower value, column N: read as .493, could be .433.",
    "Open reading. Table III, 7-027 upper value, column F: read as 1.058, could be 1.088.",
    "Open reading. Table III, 7-027 lower value, column F: read as 1.056, could be 1.086.",
    "Open reading. Table III, 7-029 upper value, column F: read as 1.680, could be 1.650.",
    "Open reading. Table III, 7-029 lower value, column F: read as 1.678, could be 1.648.",
    "Open reading. Table III, 7-030 upper value, column F: read as 2.065, could be 2.090.",
    "Open reading. Table III, 7-030 lower value, column F: read as 2.063, could be 2.065.",
    "Open reading. Table III, 7-031 upper value, column F: read as 2.477, could be 2.097.",
    "Open reading. Table III, 7-031 lower value, column F: read as 2.475, could be 2.095.",
    "Open reading. Table III, 7-034 upper value, column F: read as 1.680, could be 1.650.",
    "Open reading. Table III, 7-034 lower value, column F: read as 1.678, could be 1.648.",
    "Open reading. Table III, 7-035 upper value, column F: read as 1.308, could be 1.348.",
    "Open reading. Table III, 7-036 upper value, column F: read as 1.680, could be 1.650.",
    "Open reading. Table III, 7-036 lower value, column F: read as 1.678, could be 1.648.",
    "Open reading. Table III, 7-037 upper value, column F: read as 1.680, could be 1.650.",
    "Open reading. Table III, 7-037 lower value, column F: read as 1.678, could be 1.648.",
    "Open reading. Table III, 7-038 upper value, column F: read as 2.065, could be 2.088.",
    "Open reading. Table III, 7-038 lower value, column F: read as 2.063, could be 2.062.",
    "Open reading. Table III, 7-028 upper value, column H: read as 3.020, could be 3.088.",
    "Open reading. Table III, 7-029 upper value, column H: read as 3.145, could be 3.149.",
    "Open reading. Table III, 7-030 upper value, column H: read as 3.395, could be 3.728.",
    "Open reading. Table III, 7-030 lower value, column H: read as 3.375, could be 3.575.",
    "Open reading. Table III, 7-031 upper value, column H: read as 3.645, could be 3.648.",
    "Open reading. Table III, 7-032 upper value, column H: read as 3.090, could be 3.075.",
    "Open reading. Table III, 7-032 lower value, column H: read as 3.070, could be 3.078.",
    "Open reading. Table III, 7-033 upper value, column H: read as 3.608, could be 3.649.",
    "Open reading. Table III, 7-033 lower value, column H: read as 3.588, could be 3.598.",
    "Open reading. Table III, 7-034 upper value, column H: read as 3.608, could be 3.649.",
    "Open reading. Table III, 7-034 lower value, column H: read as 3.588, could be 3.598.",
    "Open reading. Table III, 7-036 upper value, column H: read as 3.608, could be 3.649.",
    "Open reading. Table III, 7-036 lower value, column H: read as 3.588, could be 3.598.",
    "Open reading. Table III, 7-037 upper value, column H: read as 3.608, could be 3.649.",
    "Open reading. Table III, 7-037 lower value, column H: read as 3.588, could be 3.598.",
    "Open reading. Table III, 7-038 upper value, column H: read as 3.870, could be 3.659.",
    "Open reading. Table III, 7-038 lower value, column H: read as 3.850, could be 3.650.",
    "Open reading. Table III, 7-027 upper value, column J: read as 1.526, could be 1.536.",
    "Open reading. Table III, 7-028 upper value, column J: read as 1.526, could be 1.536.",
    "Open reading. Table III, 7-029 upper value, column J: read as 1.526, could be 1.536.",
    "Open reading. Table III, 7-030 upper value, column J: read as 2.076, could be 2.086.",
    "Open reading. Table III, 7-030 upper value, column G: read as 2.605, could be 2.667.",
    "Open reading. Table III, 7-031 lower value, column G: read as 3.037, could be 3.057.",
    "Open reading. Table III, 7-038 upper value, column G: read as 2.605, could be 2.665.",
    "Open reading. Table III, 7-031 upper value, column D: read as 2.248, could be 2.748.",
    "Open reading. Table III, 7-031 lower value, column D: read as 2.752, could be 2.252.",
    "Open reading. Table III, 7-033 upper value, column C: read as 1.168, could be 1.165.",
    "Open reading. Figure 2, Stacked value beside -B- (left part of the drawing): read as .012/.014, could be .013/.014.",
    "Open reading. Figure 2, Stacked value before BREAK: read as .010/.020 BREAK, could be .020/.010 BREAK.",
    "Open reading. Figure 2, Stacked value under \"F\": read as .305/.310, could be .300/.310.",
    "Open reading. Figure 3, Stacked value beside -C-: read as .068/.083, could be .062/.085.",
    "Open reading. Figure 3, Angle near the front lip, crossed by a dotted scan line: read as 24\u00b0 \u00b11/2\u00b0, could be 24\u00b0 \u00b12\u00b0.",
    "Open reading. Table III, 7-028 upper value, column F: read as 1.308.",
    "Open reading. Table III, 7-028 lower value, column F: read as 1.306.",
    "Open reading. Table III, 7-033 upper value, column F: read as 1.308.",
    "Open reading. Table III, 7-033 lower value, column F: read as 1.306.",
    "Open reading. Table III, 7-027 upper value, column H: read as 2.645.",
    "Open reading. Table III, 7-030 upper value, column A: read as 2.880.",
    "Open reading. Table III, 7-031 upper value, column A: read as 3.380.",
    "Open reading. Table III, 7-038 upper value, column A: read as 2.880.",
    "Open reading. Table III, 7-030 lower value, column G: read as 2.595.",
    "Open reading. Table III, 7-031 upper value, column J: read as 2.280.",
    "Open reading. Table III, 7-031 lower value, column J: read as 2.285.",
    "Open reading. Table III, 7-038 upper value, column J: read as 3.245.",
    "Open reading. Table IV, row 2, column C (M24217/7-040 upper): read as 1.073, could be 1.072.",
    "Open reading. Table IV, rows 18-19, column NO.& SIZE OF CONTACTS (M24217/7-048): read as 9 NO 12, 3 NO 4 & 5\u00b012 WITH 5\u00b08, could be 9 NO 12, 3 NO 4 & 3\u00b012 WITH 5\u00b08.",
    "Open reading. Table IV, row 8, column B (M24217/7-043 upper): read as 2.910, could be 2.510.",
    "Open reading. Table IV, row 10, column A (M24217/7-044 upper): read as 3.510, could be 2.510.",
    "Open reading. Table V, rows 10-11, column FRONT INS PART NUMBER: read as M23217/7-055, could be M24217/7-055.",
    "Open reading. Figure 5, callout 28\u00b0/27\u00b0: read as 28\u00b0/27\u00b0, could be 25\u00b0/27\u00b0.",
    "Open reading. Figure 5, callout .083/.056 REF.: read as .083/.056 REF., could be .098/.083 REF.",
    "Open reading. Figure 6, callout BREAK EDGE .005/.010 (TYP): read as BREAK EDGE .005/.010 (TYP), could be BREAK EDGE .008/.010 (TYP).",
    "Open reading. Page 7, text: read as SH 12803, could be SH 12603.",
    "Open reading. Figure 7, callouts, contact letters F, G and H of M24217/7-052: read as F, G, H, could be not legible.",
    "Open reading. Page 13, text: read as SH 12606, could be SH 12608.",
    "Open reading. Figure 8, callouts, end label of row 7 of M24217/7-056, both faces: read as 34, could be 36.",
    "Open reading. Figure 10, callouts, BREAK EDGE .005/.010: read as BREAK, could be BRFAK.",
    "Open reading. Page 22, Print order number: read as A4873, could be A4673.",
    "Printed value to confirm. Table II, column G, M24217/7-026: the scan prints .933 over .931 (first digit possibly 5), larger value first, while -024 and -025 list the smaller value first (.484/.486, .608/.610).",
    "Printed value to confirm. Table IV, column C, M24217/7-046: the scan prints 1.998 over 1.208; the ring of the same size, -041, prints 1.198/1.208, so 1.998 is likely a drafting slip for 1.198.",
    "Model. Figure 3 is drawn out of proportion and the scan does not show clearly where the bore changes from C to D or what M, N, P, S, U, V, W and X locate; the model reads G as an O-ring step .081/.083 long ahead of the flange and puts the C to D step at J from the front end, and an engineer must confirm the shell profile.",
    "Model. Figure 2 ties its fixed lengths .187/.207, .081/.083, .305/.310, .310/.315, .770/.780 and .143/.148 to features only loosely; the model takes .187/.207 as the flange width, .081/.083 as the O-ring step and .770/.780 as the nose length, and the engineer must confirm the shell's axial layout and where H applies.",
    "Model. Table III prints D for M24217/7-031 as 2.248 over 2.752, both open readings; the middle, 2.500, is larger than the nose diameter F (2.475 to 2.477), so the model builds D at 2.250, which fits the 2.242 to 2.246 front insulator M24217/7-056, and the engineer must confirm D.",
    "Model. Table II prints G for M24217/7-026 as .933 over .931 (first digit possibly 5), larger than the nose diameter J (.621 to .623); the model builds G at .532 from the alternative readings .533 and .531, which fits the .523 to .527 band of front insulator M24217/7-064, and leaves the G check failing against the values as read.",
    "Model. Table IV prints B for coupling ring M24217/7-043 as 2.910 over 2.530 (2.910 may be 2.510); built at the middle, 2.720, the relief leaves a .015 wall under the 2.740 to 2.760 outside diameter, while 2.510 would match the 2.510/2.530 of ring M24217/7-048 of the same thread.",
    "Model. Table IV prints C for coupling ring M24217/7-046 as 1.998 over 1.208; ring M24217/7-041 of the same size gives 1.198/1.208, so 1.998 is likely 1.198, and the model's lip bore, built at the middle 1.603, should be checked.",
    "Model. Figure 11 does not show clearly where H and J end or how the collar, the O-ring groove (.070 and .100 callouts) and the .046 and 1.020 lengths sit; the model takes H as the overall length, J as the bore depth from the socket end and 1.020 from the groove's rear wall to the socket end, and the engineer must confirm the contact's layout.",
    "Model. These modeled dimensions rest on readings the scan leaves open and are built from the values as read: Table II E of -024; Table II F of -025; Table II K of -026; Table III A of -030, -031, -038; Table III C of -033; Table III F of -027, -028, -029, -030, -031, -033, -034, -035, -036, -037, -038; Table III G of -030, -031, -038; Table III H of -027, -028, -029, -030, -031, -032, -033, -034, -036, -037, -038; Table III J of -027, -028, -029, -030, -031, -038; Table IV A of -044; Table IV C of -040; Table VII A of -075."
   ]
  },
  {
   "id": "MIL-C-4109F",
   "slug": "mil-c-4109f",
   "title": "Coupling halves, low pressure, air hose, quick-disconnect",
   "class": "Ohio",
   "folder": "Ohio/MIL-C-4109F Coupling halves, low pressure",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 19,
   "solids": 38,
   "dimensions": 494,
   "dimensions_met": 494,
   "kind": "Military specification",
   "dated": "31 OCTOBER 1986",
   "status": "Canceled, 16 December 1999",
   "newest": "Revision F Notice 1 - Cancellation, 16 December 1999",
   "superseding": "A-A-59439",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 4,
   "by_class": {
    "Ohio": 3,
    "Seawolf": 1
   },
   "stock_examples": [
    "4730-00-489-6303, coupling half, quick disconnect, M4109-10-08-00C (Ohio)",
    "4730-00-494-3271, coupling half, quick disconnect, M4109-090800C (Ohio)",
    "4730-00-494-3273, coupling half, quick disconnect, M4109-02-08-00-B (Ohio)",
    "4730-01-423-8761, coupling half, quick disconnect, M4109-08-12-20-B (Seawolf)"
   ],
   "files": {
    "package": "MIL-C-4109F package.pdf",
    "scan": "MIL-C-4109F legacy scan.pdf",
    "clean": "MIL-C-4109F clean copy.pdf",
    "record": "MIL-C-4109F validation record.pdf",
    "sheet": "MIL-C-4109F 3D model.pdf",
    "parts": "MIL-C-4109F parts list.pdf",
    "inspection": "MIL-C-4109F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 2, page 13",
   "pictures": {
    "iso": "Models/views/M4109-14-04-00-X-freecad.png",
    "pair": "Models/views/M4109-14-04-00-X-pair.png",
    "record": "Models/views/M4109-14-04-00-X-record.png",
    "front": "Models/views/M4109-14-04-00-X-front.png",
    "top": "Models/views/M4109-14-04-00-X-top.png",
    "right": "Models/views/M4109-14-04-00-X-right.png",
    "cut": "Models/views/M4109-14-04-00-X-cut.png"
   },
   "shown_part": "M4109-14-04-00-X",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the type II (male) half's plug nose, one for each of the 38 type, class, style and size codes of 1.2 (14 class A, 24 class C), built to Table IV for the class from the front face to the face of the hexagon or flange at H: the nose B with its edge radius R, the bead A between 45 degree chamfers, the groove C of width G, the chamfer up to the body D and the bore J, the same solid for every half of a class.",
   "not_modeled": [
    "The end fitting behind H on every type II half, which the document does not dimension: the hexagon or flange, the male NPT thread of style 1 and the female NPT thread of style 2 (FED-STD-H28), the barbed hose stem of style 3 and the threaded hose stem of style 4 (manufacturer's standard commercial practice), and the style 4 hose locking sleeve, whose only callout is the hose O.D. it takes.",
    "The type I (female) halves of Figures 1 to 4, which carry no dimensions, with their actuating sleeve, shut-off valve, springs, O-rings and locking mechanism.",
    "Separate solids for material code B (brass) and C (steel) and for each style 4 hose O.D. code: they do not change the nose, so each solid is named with X for the material letter and, on style 4, XX for the hose O.D. code; with every Table II hose O.D. code the type II part numbers number more than 400.",
    "The fillet the figures draw where the body D meets the hexagon or flange, which has no dimension.",
    "Plating (3.1.1), marking, workmanship, and the flow, leakage and load requirements of 3.4 and 4.4."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "19 pages, all scanned. SHA-256 e6cbb23e86c2.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,151 of 3,331 items agreed. All 30 differences were settled against the page image. 1 value that the scan prints in a doubtful form is listed for the engineer.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "116 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 7 tables (232 cells), 8 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "38 solids in STEP AP242. 494 of 494 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision F Notice 1 - Cancellation, 16 December 1999. ASSIST also holds Revision F Amendment 1 (29 June 1992). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. The page breaks this word at the end of a line with a hyphen, so whether it is written with a hyphen cannot be seen; it is kept as read.",
    "Model. The example part number in 6.3, M4109-09-20-00C, is a style 1, type II, class A half in size code 20 (5/8), but 1.2 lists only 1/8, 1/4 and 3/8 inch NPT for class A style 1, so the engineer must decide whether size code 20 exists for code 09; no solid is named for it."
   ]
  },
  {
   "id": "MIL-C-85049/11A",
   "slug": "mil-c-85049-11a",
   "title": "Connector accessories, electrical, backshell, environmental, cable sealing, straight, category 1A (for MIL-C-5015 crimp, MIL-C-26482 series 2, MIL-C-81703 series 3, and MIL-C-83723 series III connectors)",
   "class": "Ohio",
   "folder": "Ohio/MIL-C-85049_11A Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 22,
   "solids": 157,
   "dimensions": 1284,
   "dimensions_met": 1284,
   "kind": "Military specification sheet",
   "dated": "30 November 1990",
   "status": "Canceled, 19 June 2003",
   "newest": "Revision A Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/11",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5935-01-528-4045, backshell, electrical connector, M85049/11-06W (Ohio)"
   ],
   "files": {
    "package": "MIL-C-85049_11A package.pdf",
    "scan": "MIL-C-85049_11A legacy scan.pdf",
    "clean": "MIL-C-85049_11A clean copy.pdf",
    "record": "MIL-C-85049_11A validation record.pdf",
    "sheet": "MIL-C-85049_11A 3D model.pdf",
    "parts": "MIL-C-85049_11A parts list.pdf",
    "inspection": "MIL-C-85049_11A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85049_11-24-freecad.png",
    "pair": "Models/views/M85049_11-24-pair.png",
    "record": "Models/views/M85049_11-24-record.png",
    "front": "Models/views/M85049_11-24-front.png",
    "top": "Models/views/M85049_11-24-top.png",
    "right": "Models/views/M85049_11-24-right.png",
    "cut": "Models/views/M85049_11-24-cut.png"
   },
   "shown_part": "M85049/11-24",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 157 MIL-C-85049/11A straight cable-sealing backshells (Style 1 and Style 2): coupling nut, sleeve or adapter transition, rear adapter at the V thread, working room and wire passage, sized to Table I.",
   "not_modeled": [
    "The coupling nut interface and internal thread (MIL-C-85049 figure 4), the ferrule, O-rings, grommet and grommet follower.",
    "The cable clamp (MIL-C-85049/42) and its grip on the smallest bundle, A min; the three .020 safety wire holes, whose size and position the sheet does not give; the knurl and the marking.",
    "The coupling nut is one solid with the body; on the part it is captive and free to rotate on the follower (requirement 1c).",
    "Finish codes N, W, B and S (Table II), which do not change geometry; one solid per dash number."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "22 pages, all scanned. SHA-256 b1aef2786e78.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,674 of 2,737 items agreed. All 61 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1,976 checks on size series and limits. 95 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 15 tables (3,198 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "157 solids in STEP AP242. 1,284 of 1,284 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 1 - Cancellation, 19 June 2003.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Dash numbers 132 and 133 (MIL-C-5015 shell 36, clamp 12) print G max 5.32 and 6.32 under H max 5.68 and 6.68, so H minus G is .36 where every other MIL-C-5015 shell 28 to 48 dash number has .52, and dash numbers 56, 134 and 135, with the same clamp and B, print G 5.16 and 6.16 under the same H; the engineer must confirm G for these two, and the solids use the printed values, which give them a .36 coupling nut."
   ]
  },
  {
   "id": "MIL-C-85049/37A",
   "slug": "mil-c-85049-37a",
   "title": "Connector accessories, electrical, backshell, nonenvironmental, split 90\u00b0, EMI/RFI shield termination, category 3B (for MIL-C-38999 series I and II connectors)",
   "class": "Ohio",
   "folder": "Ohio/MIL-C-85049_37A Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 76,
   "dimensions": 646,
   "dimensions_met": 646,
   "kind": "Military specification sheet",
   "dated": "21 November 1986",
   "status": "Canceled, 19 June 2003",
   "newest": "Revision A Notice 2 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/37",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5935-01-529-5110, backshell, electrical connector, M85049/37-20W07L (Ohio)"
   ],
   "files": {
    "package": "MIL-C-85049_37A package.pdf",
    "scan": "MIL-C-85049_37A legacy scan.pdf",
    "clean": "MIL-C-85049_37A clean copy.pdf",
    "record": "MIL-C-85049_37A validation record.pdf",
    "sheet": "MIL-C-85049_37A 3D model.pdf",
    "parts": "MIL-C-85049_37A parts list.pdf",
    "inspection": "MIL-C-85049_37A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85049_3716W04L-freecad.png",
    "pair": "Models/views/M85049_3716W04L-pair.png",
    "record": "Models/views/M85049_3716W04L-record.png",
    "front": "Models/views/M85049_3716W04L-front.png",
    "top": "Models/views/M85049_3716W04L-top.png",
    "right": "Models/views/M85049_3716W04L-right.png",
    "cut": "Models/views/M85049_3716W04L-cut.png"
   },
   "shown_part": "M85049/3716W04L",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 76 MIL-C-85049/37A split 90 degree backshells (shell sizes 8 to 24, every clamp size Table I allows, L and D hole options): coupling ring, hollow elbow, cable clamp and the encapsulating or drain holes, sized to Tables I and II.",
   "not_modeled": [
    "The accessory front end and coupling thread, which follow the MIL-C-38999 accessory interface dimensions.",
    "The split line, ground ring, clamp screws and lockwashers, knurl and marking.",
    "Finish codes W and N, which do not change geometry; every solid carries finish W."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, all scanned. SHA-256 ad292a56044f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "426 of 490 items agreed. All 60 differences were settled against the page image. A second pass settled 1 from a second printing in the document.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "154 checks on size series and limits. None failed. 18 values are also printed on 9 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (213 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "76 solids in STEP AP242. 646 of 646 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 2 - Cancellation, 19 June 2003. ASSIST also holds Revision A Amendment 1 (30 July 1997). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table I prints E maximum 2.30 and D reference 2.15 for shell size 24, both confirmed in the metric list on page 2, which leaves a .15 coupling ring length where every other shell size leaves .24. The engineer must decide whether size 24 has a shorter coupling ring or one of the two values is a drafting error; the model follows the table."
   ]
  },
  {
   "id": "MIL-C-85049/76",
   "slug": "mil-c-85049-76",
   "title": "Connector accessories, electrical, backshell, environmental, 90\u00b0, shield termination, category 2B, nonself-locking (MIL-C-38999 series I and II connectors)",
   "class": "Ohio",
   "folder": "Ohio/MIL-C-85049_76 Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 84,
   "dimensions": 924,
   "dimensions_met": 924,
   "kind": "Military specification sheet",
   "dated": "28 August 1989",
   "status": "Canceled, 19 June 2003",
   "newest": "Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/76",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5935-01-529-5187, backshell, electrical connector, M85049/76-12W03 (Ohio)"
   ],
   "files": {
    "package": "MIL-C-85049_76 package.pdf",
    "scan": "MIL-C-85049_76 legacy scan.pdf",
    "clean": "MIL-C-85049_76 clean copy.pdf",
    "record": "MIL-C-85049_76 validation record.pdf",
    "sheet": "MIL-C-85049_76 3D model.pdf",
    "parts": "MIL-C-85049_76 parts list.pdf",
    "inspection": "MIL-C-85049_76 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85049_76-18W07-freecad.png",
    "pair": "Models/views/M85049_76-18W07-pair.png",
    "record": "Models/views/M85049_76-18W07-record.png",
    "front": "Models/views/M85049_76-18W07-front.png",
    "top": "Models/views/M85049_76-18W07-top.png",
    "right": "Models/views/M85049_76-18W07-right.png",
    "cut": "Models/views/M85049_76-18W07-cut.png"
   },
   "shown_part": "M85049/76-18W07",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-C-85049/76 90 degree backshell for all 42 accessory shell size and clamp size combinations in Table I in finishes N and W (84 part numbers): coupling ring of diameter A and length .590 with three safety wire holes, adapter body turning down into a leg whose far side lies at D from the interface length line, and clamp of width Y on the clamp axis at B, with overall height C and a clamp opening at the wire bundle maximum of Table II.",
   "not_modeled": [
    "Accessory front end and coupling thread, which the sheet refers to the MIL-C-38999 series I and II accessory interface dimensions; the ring and body are solid envelopes without the connector bore.",
    "O-rings, grommet, shield termination cone, fillister head clamp screws with lock washers, knurl and marking.",
    "The captive, free-rotating coupling nut, adapter body and clamp as separate parts: they are fused into one envelope solid.",
    "Finish N and W part numbers share one geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 bf4e57c06fde.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "410 of 487 items agreed. All 68 differences were settled against the page image. 2 marks outside the technical content are kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "33 checks on size series and limits. None failed. 66 values are also printed on 9 other sheets of the series: 64 match, 2 differ as printed. A later review settled 2 printed values from the other sheets of the series.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (121 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "84 solids in STEP AP242. 924 of 924 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Notice 1 - Cancellation, 19 June 2003. ASSIST also holds Amendment 1 (30 July 1997) and Amendment 2 (8 August 1999). They were issued after this revision and are not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 measures C from the dashed line at the top of the body to the bottom of the clamp, but no dimension places that line from the connector centerline, and the figure draws it a little below the top of the coupling ring. The engineer must decide how far the top of the body sits above the centerline; the solids put it flush with the top of the ring."
   ]
  },
  {
   "id": "MIL-C-85049/77",
   "slug": "mil-c-85049-77",
   "title": "Connector accessories, electrical, backshell, environmental, 45\u00b0, shield termination, category 2B, nonself-locking (MIL-C-38999 series I and II connectors)",
   "class": "Ohio",
   "folder": "Ohio/MIL-C-85049_77 Connector accessories, electrical",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 6,
   "solids": 84,
   "dimensions": 1260,
   "dimensions_met": 1260,
   "kind": "Military specification sheet",
   "dated": "28 August 1989",
   "status": "Canceled, 19 June 2003",
   "newest": "Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/77",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5935-01-551-6180, backshell, electrical connector, M85049/77-08W (Ohio)"
   ],
   "files": {
    "package": "MIL-C-85049_77 package.pdf",
    "scan": "MIL-C-85049_77 legacy scan.pdf",
    "clean": "MIL-C-85049_77 clean copy.pdf",
    "record": "MIL-C-85049_77 validation record.pdf",
    "sheet": "MIL-C-85049_77 3D model.pdf",
    "parts": "MIL-C-85049_77 parts list.pdf",
    "inspection": "MIL-C-85049_77 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85049_77-16W04-freecad.png",
    "pair": "Models/views/M85049_77-16W04-pair.png",
    "record": "Models/views/M85049_77-16W04-record.png",
    "front": "Models/views/M85049_77-16W04-front.png",
    "top": "Models/views/M85049_77-16W04-top.png",
    "right": "Models/views/M85049_77-16W04-right.png",
    "cut": "Models/views/M85049_77-16W04-cut.png"
   },
   "shown_part": "M85049/77-16W04",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-C-85049/77 45 degree backshell for all 42 accessory shell size and clamp size combinations of table I in finishes N and W (84 part numbers): coupling ring of diameter A and length .590 with three safety wire holes, adapter body bending 45 degrees at B behind the interface plane, and a loosely assembled clamp at C along the leg with lugs Y apart, its rearmost point at D, and a wire passage at the wire bundle maximum of table II.",
   "not_modeled": [
    "Accessory front end (coupling thread, mating face and front O-ring), which the sheet refers to the MIL-C-38999 series I and II accessory interface dimensions; the ring has a plain bore from its front face to the interface plane.",
    "O-rings, the grommet of detail A and its seal down to the wire bundle minimum, the shield termination (single shield, single cone) and braid, and the fillister head clamp screws with lock washers.",
    "The captive, free-turning coupling nut, the adapter body and the clamp as separate parts: they are one solid.",
    "Knurling, marking and finish; finish N and W part numbers share one geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 eb21fe6b1a40.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "416 of 486 items agreed. 77 differences went to a third reader. A second pass settled 46 from a second printing in the document, 7 from the sheet's layout (a point the scan did not print). 10 readings remain open.",
     "result": "10 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "33 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (121 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "84 solids in STEP AP242. 1,260 of 1,260 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Notice 1 - Cancellation, 19 June 2003.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 1, after 'STATEMENT A' and after 'release': read as DISTRIBUTION STATEMENT A Approved for public release distribution is unlimited., could be DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.",
    "Open reading. Table II, footnote 1/, after 'Dimensions are in inches': read as inches, could be inches.",
    "Open reading. Page 5, after 'Configuration and dimensions': read as dimensions, could be dimensions:.",
    "Open reading. Page 5, after 'Termination method': read as method, could be method:.",
    "Open reading. Page 5, after 'Clamp screws and lockwashers': read as lockwashers, could be lockwashers:.",
    "Open reading. Page 5, after 'Grommet and O-rings': read as O-rings, could be O-rings:.",
    "Open reading. Page 5, after 'Finish': read as Finish, could be Finish:.",
    "Open reading. Page 6, after 'Marking': read as Marking, could be Marking:.",
    "Open reading. Page 6, after 'Qualification': read as Qualification, could be Qualification:.",
    "Open reading. Page 6, after 'QPL evaluating activity': read as activity, could be activity:.",
    "Model. L REF minus D, the interface length of figure 1, is .30 for shell size 08 and .26 for shell sizes 10 to 24, while MIL-C-85049/76, the 90 degree sheet of the same date for the same connectors, gives .30 for sizes 10 to 24; the engineer must confirm the interface length against the MIL-C-38999 series I and II accessory interface dimensions.",
    "Model. Figure 1 draws D to the rear corner of a clamp lug, but table I gives one D \u00b1.062 for each shell size while Y max in table II changes with the clamp size (1.20 to 1.90 on shell size 24), which moves that corner by about .25; D fits a round clamp end of diameter A at C on every shell size (B + (C + A/2)/\u221a2 is within .022 of D). The solids reach D with the clamp nut, so on the larger clamps of shell sizes 08, 10, 12 and 16 the upper lug lies up to .041 past D, inside its \u00b1.062, and the engineer must decide which point D is measured to."
   ]
  },
  {
   "id": "MIL-C-915/82A",
   "slug": "mil-c-915-82a",
   "title": "Cable, power electrical, one twisted pair no. 16 gauge fluoropolymer insulation, for submarine outboard use only (not for inboard use), type 1PR-16",
   "class": "Ohio",
   "folder": "Ohio/MIL-C-915_82A Cable, power electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification sheet",
   "dated": "29 September 1989",
   "status": "Inactive, 22 March 2023",
   "newest": "Revision A Notice 2 - Validation, 22 March 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "6145-01-337-4983, cable, power, electrical, MIL-C-915/82 (Ohio)"
   ],
   "files": {
    "package": "MIL-C-915_82A package.pdf",
    "scan": "MIL-C-915_82A legacy scan.pdf",
    "clean": "MIL-C-915_82A clean copy.pdf",
    "record": "MIL-C-915_82A validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 b6db18f883ad.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "293 of 295 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (60 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-C-915/82A is a specification sheet for the type 1PR-16 twisted-pair outboard cable, ordered by length (500 feet minimum), that has no drawing and states the cable\u2019s make-up only in notes (AWG 16 class B tin-coated copper conductors, ETFE insulation with a 0.010 inch nominal wall and a 0.082 inch maximum insulated diameter, a 1-1/4 \u00b1 1/8 inch pair lay, a polyurethane jacket with a 0.105 inch nominal wall and a 0.380 to 0.400 inch overall diameter) and gives electrical and physical test limits in its one table, so it fixes no part shape to model.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision A Notice 2 - Validation, 22 March 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-D-19458A(SHIPS)",
   "slug": "mil-d-19458a-ships",
   "title": "Diver's dress, swim suit",
   "class": "Ohio",
   "folder": "Ohio/MIL-D-19458A(SHIPS) Diver's dress, swim suit",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "14 August 1964",
   "status": "Canceled, 22 May 1987",
   "newest": "Revision A Notice 1 - Cancellation, 22 May 1987",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-D-19458A(SHIPS) package.pdf",
    "scan": "MIL-D-19458A(SHIPS) legacy scan.pdf",
    "clean": "MIL-D-19458A(SHIPS) clean copy.pdf",
    "record": "MIL-D-19458A(SHIPS) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, all scanned. SHA-256 18b41a233d8d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,157 of 4,273 items agreed. All 59 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "53 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 7 tables (192 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-D-19458A specifies a rubber-coated diver's swim suit in five sizes by its materials and their physical properties (Tables I to V and 3.2.8), its construction and its girth and length measurements by suit size (Table VI); its one drawing, Figure 1, shows the exhaust valve as installed with five values (the 3/8 bore, the 2 base flange and 2 1/2 cover patch diameters, 5 3/8 from the base centerline to the valve fitting and the fitting's 1 3/4 length) and leaves the tube's outside diameter, the stem's rise and bend and the fitting's diameter undimensioned, so no part shape is fixed.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 1 - Cancellation, 22 May 1987.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-10544D",
   "slug": "mil-dtl-10544d",
   "title": "Connectors, plug, and receptacle (electrical, audio, weatherproof, ten contact, polarized)",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-10544D Connectors, plug",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "5 January 2024",
   "status": "Inactive, 5 January 2023",
   "newest": "Revision D, 5 January 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5935-00-283-2950, connector, plug, electrical, MIL-DTL-10544 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-10544D package.pdf",
    "scan": "MIL-DTL-10544D legacy scan.pdf",
    "clean": "MIL-DTL-10544D clean copy.pdf",
    "record": "MIL-DTL-10544D validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, 0 scanned. SHA-256 65cff9b7cfae.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,375 of 4,468 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "14 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 10 tables (188 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-10544D is a detail specification for weatherproof, polarized, ten-contact audio plugs and receptacles (U-77( )/U through U-165( )/U) that sets finish, contact plating, contact depression, contact resistance, dielectric, air pressure, bounce, drop, immersion, corrosion and vibration requirements and their inspection and sampling tables, and sends every connector shape and dimension to ECOM drawings SC-DL-22728 to SC-DL-106000; paragraph 4.6 names interchangeability dimensions (a) to (o) without values and Figure 1 is an undimensioned air pressure test set-up.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision D, 5 January 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-1183K w/AMENDMENT 2",
   "slug": "mil-dtl-1183k-w-amendment-2",
   "title": "Fittings, pipe, cast bronze, silver-brazing, general specification for",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-1183K w_AMENDMENT 2 Fittings, pipe",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 81,
   "dimensions": 870,
   "dimensions_met": 870,
   "kind": "Detail specification",
   "dated": "20 August 2019",
   "status": "Active, 17 April 2024",
   "newest": "Revision K Notice 1 - Validation, 17 April 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 12,
   "by_class": {
    "Ohio": 12
   },
   "stock_examples": [
    "4730-00-542-5102, coupling, pipe, MIL-F-1183H (Ohio)",
    "4730-00-542-5104, coupling, pipe, MIL-F-1183H (Ohio)",
    "4730-00-542-5107, coupling, pipe, MIL-F-1183 (Ohio)",
    "4730-00-542-5111, coupling, pipe, MIL-F-1183 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-1183K w_AMENDMENT 2 package.pdf",
    "scan": "MIL-DTL-1183K w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-DTL-1183K w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-DTL-1183K w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-DTL-1183K w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-DTL-1183K w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-DTL-1183K w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 12",
   "pictures": {
    "iso": "Models/views/MIL-DTL-1183_Type_B_face_fed_socket_end_2-freecad.png",
    "pair": "Models/views/MIL-DTL-1183_Type_B_face_fed_socket_end_2-pair.png",
    "record": "Models/views/MIL-DTL-1183_Type_B_face_fed_socket_end_2-record.png",
    "front": "Models/views/MIL-DTL-1183_Type_B_face_fed_socket_end_2-front.png",
    "top": "Models/views/MIL-DTL-1183_Type_B_face_fed_socket_end_2-top.png",
    "right": "Models/views/MIL-DTL-1183_Type_B_face_fed_socket_end_2-right.png",
    "cut": "Models/views/MIL-DTL-1183_Type_B_face_fed_socket_end_2-cut.png"
   },
   "shown_part": "MIL-DTL-1183 Type B face fed socket end 2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the socket ends of figures 1 and 2 and the brazing ring of figure 3: Type A streamlined socket ends in all 17 nominal pipe sizes 1/4 to 12 and Type B nonstreamlined socket ends in the 15 sizes 1/4 to 8 that Table I dimensions, each face fed and grooved, with a stub of body, and the 17 split silver-brazing rings of Table II.",
   "not_modeled": [
    "The fittings themselves (couplings, tees, elbows, crosses, Y-branches, reducers, bushings, adapters, caps, plugs and unions), whose bodies, center-to-end dimensions and reducing transitions the specification sheets give; this document adds only the table IV center-to-end tolerances and the 3.4 wall rules for reducing fittings.",
    "Threaded ends (3.5.2, NPT to FED-STD-H28/7) and the knurled, ribbed, lugged or octagonal ends of union tailpieces and threadpieces (3.5).",
    "Type B socket ends in sizes 10 and 12, for which Table I prints no B, E, F, H or K.",
    "The .010 R groove corners and the 1/64 R MAX socket bottom corner of figure 1, the rounded corners the band may have (3.5), the rounding or breaking of sharp corners (3.3) and the optional locating ribs or lugs (3.3); these corners are sharp on the solids.",
    "The pipe outside diameter column of Table I, which describes the mating pipe, not the fitting.",
    "Material (3.2), working pressures and temperatures (table III), surface finish (3.7), casting tolerances (table V), marking (3.9), the brazing ring alloy (QQ-B-654, BCuP-5) and the ring's free shape before it is put in the gauge."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, 0 scanned. SHA-256 97612f769d14.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,731 of 2,751 items agreed. All 17 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "641 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 7 tables (640 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "81 solids in STEP AP242. 870 of 870 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K Notice 1 - Validation, 17 April 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-1183/10B w/AMENDMENT 2",
   "slug": "mil-dtl-1183-10b-w-amendment-2",
   "title": "Fittings, pipe, cast bronze, silver-brazing; union, pipe",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-1183_10B w_AMENDMENT 2 Fittings, pipe",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 40,
   "dimensions": 384,
   "dimensions_met": 362,
   "kind": "Detail specification sheet",
   "dated": "19 August 2022",
   "status": "Active, 19 August 2022",
   "newest": "Revision B Amendment 2 (all previous amendments incorporated), 19 August 2022",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Ohio": 2
   },
   "stock_examples": [
    "4730-00-542-5189, union, pipe, M1183/10-11A1 (Ohio)",
    "4730-00-542-5199, union, pipe, M1183/10-13A34 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-1183_10B w_AMENDMENT 2 package.pdf",
    "scan": "MIL-DTL-1183_10B w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-DTL-1183_10B w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-DTL-1183_10B w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-DTL-1183_10B w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-DTL-1183_10B w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-DTL-1183_10B w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M1183_10-14N3_tailpiece-freecad.png",
    "pair": "Models/views/M1183_10-14N3_tailpiece-pair.png",
    "record": "Models/views/M1183_10-14N3_tailpiece-record.png",
    "front": "Models/views/M1183_10-14N3_tailpiece-front.png",
    "top": "Models/views/M1183_10-14N3_tailpiece-top.png",
    "right": "Models/views/M1183_10-14N3_tailpiece-right.png",
    "cut": "Models/views/M1183_10-14N3_tailpiece-cut.png"
   },
   "shown_part": "M1183/10-14N3 tailpiece",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of every nominal pipe size, 1/4 to 2: the female thread piece, female tailpiece and retainer ring of female union M1183/10-1XN3, the union nut M1183/10-5XN1, which is also the nut of that union, and the male thread tailpiece M1183/10-3XN1, each on the X axis with its Table I or Table II dimensions, including the spherical ground seat set by P, Q and R and the 45 degree seat and V thread of the thread piece.",
   "not_modeled": [
    "The female union alone has 560 part numbers (8 sizes, five socket letters, O-ring codes 2 to 8, with and without -PW), so each size is built once, the female union as M1183/10-1XN3; the other letters and codes change only the brazing ring groove, the packaging, the O-ring material and the alloy.",
    "The O-ring of figure 7, whose inside diameter and cross section SAE-AS568 gives for the Table III size; this sheet prints neither.",
    "The thread form: pitch diameters d and f, the minor diameter t, the V thread profile, and the taper, form and length of the male pipe thread.",
    "The silver-brazing socket diameter and depth, the brazing ring groove of letters G, R, A and S and the brazing ring, which MIL-DTL-1183 gives, and the Type A streamlined interior beyond the bores C.",
    "The round at the inside edge of the tailpiece nose, the 45 degree chamfer at the entry of the nut thread, the hex form of U, the chamfers at the end of the male pipe thread and its bore, and the broken corners and finish of the retainer ring.",
    "Material, the lead-free requirement of -PW, the steam-service O-ring of codes 4, 6 and 8, and packaging."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 e3f7a1a5d080.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,265 of 1,265 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "368 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 9 tables (434 cells), 7 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "40 solids in STEP AP242. 362 of 384 stated dimensions measure within limits; 22 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Amendment 2 (all previous amendments incorporated), 19 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, column 'P': 0.135 then 0.13. Page 2 prints 0.135 for size 1 and 0.130 for size 1-1/4, and the old text layer agrees; it is the only dip in an otherwise rising column of ground-seat contact points (the same dip is printed in MIL-DTL-1183/11), a point for an engineer.",
    "Model. The sheet takes the socket diameter and depth from MIL-DTL-1183, which is not joined to this package, and gives the male tailpiece's pipe thread by size only, so the sockets, the male thread and the shoulder ahead of it are stand-ins until rebuilt from MIL-DTL-1183 and ASME B1.20.1.",
    "Model. Table I prints no tolerance on D, E, G, I, O, P, Q, R, S, U, X, c and j, which MIL-DTL-1183 governs, so these are built and checked at the printed value.",
    "Model. On every size Table I prints b (ref) 0.004 to 0.010 larger than the diameter at which the seat sphere set by R, Q, P and X meets the nose face (0.441 against 0.431 at 1/4, 2.276 against 2.271 at 2), so the tailpieces carry the sphere's value and their b checks report a source conflict; an engineer should confirm whether b is an old reference value or the nose carries a short land at b.",
    "Model. With c as printed, the seat sphere set by P, Q and R meets c 0.0307 (3/8), 0.0302 (1-1/4) and 0.0298 (2) from the flange face against the 1/32 (0.0313) reference land of figure 2, so those land checks report a source conflict."
   ]
  },
  {
   "id": "MIL-DTL-1183/11B w/AMENDMENT 1",
   "slug": "mil-dtl-1183-11b-w-amendment-1",
   "title": "Fittings, pipe, cast bronze, silver-brazing; union elbow, pipe and union tee, pipe",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-1183_11B w_AMENDMENT 1 Fittings, pipe",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 96,
   "dimensions": 1712,
   "dimensions_met": 1696,
   "kind": "Detail specification sheet",
   "dated": "20 August 2019",
   "status": "Active, 11 April 2024",
   "newest": "Revision B Notice 1 - Validation, 11 April 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-542-5210, elbow, tube, M1183/11-37A34 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-1183_11B w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-1183_11B w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-1183_11B w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-1183_11B w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-1183_11B w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-1183_11B w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-1183_11B w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 2, page 1",
   "pictures": {
    "iso": "Models/views/M1183_11-31N2-freecad.png",
    "pair": "Models/views/M1183_11-31N2-pair.png",
    "record": "Models/views/M1183_11-31N2-record.png",
    "front": "Models/views/M1183_11-31N2-front.png",
    "top": "Models/views/M1183_11-31N2-top.png",
    "right": "Models/views/M1183_11-31N2-right.png",
    "cut": "Models/views/M1183_11-31N2-cut.png"
   },
   "shown_part": "M1183/11-31N2",
   "application": "FreeCAD 1.1.4",
   "modeled": "The 64 union elbow and union tee codes of Table V (eight fittings, female and male, in the eight sizes from 1/4 to 2) as envelope solids of the assembled body, tailpiece and nut, each built as socket code N and O-ring code 2 with the union leg on X, the MIL-DTL-1183 Type A socket ends and body and the MIL-DTL-1183/10 union thread, plus the female tailpiece, male thread tailpiece, nut and retainer ring of Tables II and III in every size: 96 solids.",
   "not_modeled": [
    "The sheet defines 4,480 part numbers (64 fitting and size codes, five socket code letters, seven O-ring codes, each with and without -PW); one solid is built per fitting and size code as N2 without -PW, and the others share it.",
    "The O-ring of figure 10, which Table IV names only by its SAE-AS568 dash number (AS568-017 to AS568-232); its ID and CS are in SAE-AS568.",
    "The O-ring and retainer ring inside the fittings of O-ring codes 3 to 8; the retainer ring is built on its own.",
    "The brazing ring groove and brazing ring of socket codes G, R, A and S (MIL-DTL-1183 table I, table II and figure 3); every socket is built face fed, code N.",
    "The union thread form (pitch diameter d, minor diameter t, the V thread and the 45 degree end chamfer of at least half a pitch), the root radius a under the threaded shoulder and the body's ground joint seat (MIL-DTL-1183/10).",
    "The nut thread form: pitch diameter f, minor diameter h and the V thread (16-UNS to 10-UNS), and the 45 degree countersink at the thread entry, which is not sized.",
    "The tapered pipe thread form of the male tailpiece, the tapers figures 5 and 6 draw between the shoulder, neck and thread, and the hexagon that figure 5 allows for U.",
    "The 1/32 REF land length, a reference dimension (it is reported, not checked), broken corners, the 32 and 63 surface finishes of figure 9, and material."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 0 scanned. SHA-256 685b1dacf90c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "990 of 1,105 items agreed. All 118 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "409 checks on size series and limits. 9 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 7 tables (432 cells), 10 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "96 solids in STEP AP242. 1,696 of 1,712 stated dimensions measure within limits; 16 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 11 April 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table II, column 'P': 0.135 then 0.13. Page 4 prints 0.135 for size 1 and 0.130 for size 1-1/4, and the old text layer agrees; it is the only dip in an otherwise rising column of ground-seat contact points, a point for an engineer.",
    "Model. With the tailpiece seat a sphere of radius R centered on the axis through the contact circle Q, P from that circle to the flange face and X from the end face to the flange face, the seat meets the end face at 0.431 on the 1/4 size, under b 0.441, and 0.004 to 0.010 under b on every size, while the 1/32 REF land comes out at 1/32 within 0.002, so b, P and X cannot all hold as printed.",
    "Model. Requirement 3 gives the female union tees a male tailpiece, while figures 3 and 4 draw the socket (female) tailpiece and requirement 4 gives the male tailpiece to the male union tees; the solids follow the figures.",
    "Model. Table I gives B and E only to the end of the female tailpiece and gives no ground joint face position for the 90 degree elbow and branch tee, so the male fittings' thread end and those faces are placed from the 45 degree elbow's E - D, not from a printed value."
   ]
  },
  {
   "id": "MIL-DTL-1183/3B w/AMENDMENT 1",
   "slug": "mil-dtl-1183-3b-w-amendment-1",
   "title": "Fittings, pipe, cast bronze, silver-brazing; coupling, pipe",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-1183_3B w_AMENDMENT 1 Fittings, pipe",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 340,
   "dimensions": 340,
   "dimensions_met": 340,
   "kind": "Detail specification sheet",
   "dated": "20 August 2019",
   "status": "Active, 17 April 2024",
   "newest": "Revision B Notice 1 - Validation, 17 April 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 5,
   "by_class": {
    "Ohio": 5
   },
   "stock_examples": [
    "4730-00-542-5100, coupling, pipe, M1183/3-01A (Ohio)",
    "4730-00-542-5102, coupling, pipe, M1183/3-03-G (Ohio)",
    "4730-00-542-5104, coupling, pipe, M1183/3-05-G (Ohio)",
    "4730-00-542-5107, coupling, pipe, M1183/3-08A (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-1183_3B w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-1183_3B w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-1183_3B w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-1183_3B w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-1183_3B w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-1183_3B w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-1183_3B w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/M1183_3-09N-freecad.png",
    "pair": "Models/views/M1183_3-09N-pair.png",
    "record": "Models/views/M1183_3-09N-record.png",
    "front": "Models/views/M1183_3-09N-front.png",
    "top": "Models/views/M1183_3-09N-top.png",
    "right": "Models/views/M1183_3-09N-right.png",
    "cut": "Models/views/M1183_3-09N-cut.png"
   },
   "shown_part": "M1183/3-09N",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of all 340 part numbers, the coupling and slip coupling in the 17 nominal pipe sizes from 1/4 to 12 with each socket code letter, with and without -PW: a plain tube on the X axis whose length is the Table I end-to-end dimension A.",
   "not_modeled": [
    "The tolerance on A, twice the MIL-DTL-1183 table IV value for the size; A is built and checked at its nominal value.",
    "The socket diameter and depth, the wall and the outside shape of the end bands, which MIL-DTL-1183 table IV and figure 2 give.",
    "The Type A streamlined interior of the regular coupling and the bore J that slip couplings are reamed through to (MIL-DTL-1183 figure 2).",
    "The brazing ring groove of socket codes G, R, A and S and the brazing ring itself.",
    "The ribs of figure 1, which requirement 4 makes optional and the sheet does not dimension.",
    "Material, the lead-free requirement of -PW and the packaging of the brazing rings."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 48522381e3a5.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "509 of 525 items agreed. All 16 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "80 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (95 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "340 solids in STEP AP242. 340 of 340 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 17 April 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet takes the socket diameter and depth, the wall, the brazing ring groove and the slip coupling bore J from MIL-DTL-1183 table IV and figure 2, which is not joined to this package, so the bore and outside diameter of every solid are stand-ins until they are rebuilt from MIL-DTL-1183.",
    "Model. The tolerance on A is twice the MIL-DTL-1183 table IV value for each size, which this sheet does not print, so the A checks hold each solid to the nominal Table I value only."
   ]
  },
  {
   "id": "MIL-DTL-1183/5A w/AMENDMENT 1",
   "slug": "mil-dtl-1183-5a-w-amendment-1",
   "title": "Fittings, pipe, cast bronze, silver-brazing; elbow, pipe",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-1183_5A w_AMENDMENT 1 Fittings, pipe",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 50,
   "dimensions": 150,
   "dimensions_met": 150,
   "kind": "Detail specification sheet",
   "dated": "20 August 2019",
   "status": "Active, 17 April 2024",
   "newest": "Revision A Notice 1 - Validation, 17 April 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 8,
   "by_class": {
    "Ohio": 8
   },
   "stock_examples": [
    "4730-00-542-5142, elbow, pipe, M1183/5-03-G (Ohio)",
    "4730-00-542-5144, elbow, pipe, M1183/5-05A (Ohio)",
    "4730-00-542-5147, elbow, pipe, M1183/5-08-G (Ohio)",
    "4730-00-542-5148, elbow, pipe, M1183/5-09A (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-1183_5A w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-1183_5A w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-1183_5A w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-1183_5A w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-1183_5A w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-1183_5A w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-1183_5A w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 2, page 1",
   "pictures": {
    "iso": "Models/views/M1183_5-29N-freecad.png",
    "pair": "Models/views/M1183_5-29N-pair.png",
    "record": "Models/views/M1183_5-29N-record.png",
    "front": "Models/views/M1183_5-29N-front.png",
    "top": "Models/views/M1183_5-29N-top.png",
    "right": "Models/views/M1183_5-29N-right.png",
    "cut": "Models/views/M1183_5-29N-cut.png"
   },
   "shown_part": "M1183/5-29N",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 50 elbow style and size codes of Table II, the 90 degree and 45 degree elbows in the 17 nominal pipe sizes from 1/4 to 12 and the 90 degree long turn in the 16 sizes from 1/4 to 10, each built as socket code letter N: a round tube bent through 90 or 45 degrees whose center-to-end at both ends is the Table I dimension A, B or C.",
   "not_modeled": [
    "The sheet defines 500 part numbers (50 style and size codes, five socket code letters, each with and without -PW); one solid is built per code as socket letter N without -PW, and the other 450 part numbers share it.",
    "The tolerance on A, B and C, which this sheet does not print; they are built and checked at their Table I values.",
    "The socket diameter and depth, the straight socket ends, the wall and the outside shape of the socket bands, which MIL-DTL-1183 gives.",
    "The shape of each bend beyond its center-to-end dimension, such as the tight inside corner of figure 1 and the long radius of figure 3, which the figures draw but do not dimension.",
    "The Type A streamlined interior that requirement 1 calls for.",
    "The brazing ring groove of socket codes G, R, A and S and the brazing ring itself.",
    "Material, the lead-free requirement of -PW and the packaging of the brazing rings."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 b3fb50e6fed3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "537 of 565 items agreed. All 11 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "110 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (146 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "50 solids in STEP AP242. 150 of 150 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 17 April 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet takes the socket diameter and depth, the wall, the Type A interior and the brazing ring groove from MIL-DTL-1183, which is not joined to this package, so the bore, outside diameter and bend shape of every solid are stand-ins until they are rebuilt from MIL-DTL-1183.",
    "Model. The sheet prints no tolerance on the center-to-end dimensions A, B and C, so the checks hold each solid to its nominal Table I value only."
   ]
  },
  {
   "id": "MIL-DTL-1183/8B w/AMENDMENT 1",
   "slug": "mil-dtl-1183-8b-w-amendment-1",
   "title": "Fittings, pipe, cast bronze, silver-brazing; reducing coupling, bushing, and adapter, pipe",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-1183_8B w_AMENDMENT 1 Fittings, pipe",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 56,
   "dimensions": 88,
   "dimensions_met": 88,
   "kind": "Detail specification sheet",
   "dated": "20 August 2019",
   "status": "Active, 17 April 2024",
   "newest": "Revision B Notice 1 - Validation, 17 April 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-542-5316, reducer, pipe, M1183/8-16A (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-1183_8B w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-1183_8B w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-1183_8B w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-1183_8B w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-1183_8B w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-1183_8B w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-1183_8B w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M1183_8-52N-freecad.png",
    "pair": "Models/views/M1183_8-52N-pair.png",
    "record": "Models/views/M1183_8-52N-record.png",
    "front": "Models/views/M1183_8-52N-front.png",
    "top": "Models/views/M1183_8-52N-top.png",
    "right": "Models/views/M1183_8-52N-right.png",
    "cut": "Models/views/M1183_8-52N-cut.png"
   },
   "shown_part": "M1183/8-52N",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of all 56 styles and sizes at socket code N: 25 reducing couplings (01-25), 23 bushings (41-63) and 8 adapters (81-88), each on the X axis with its Table I length, and on the adapters the D and E bands and the 1/16 x 45 degree inside chamfer of figure 3.",
   "not_modeled": [
    "Socket code letters G, R, A and S and the -PW lead-free form: 560 part numbers in all, so each style and size is built once at socket code N; the other letters differ only in the brazing ring groove and ring, and -PW only in material.",
    "The tolerance on A, B and F, twice the MIL-DTL-1183 table IV value for the reduced socket end; each is built and checked at its nominal Table I value.",
    "The socket diameter and depth, the bore, the pipe stop and the body wall thickness, which MIL-DTL-1183 gives (requirement 2 cites its table V for the bushing wall).",
    "The Type A streamlined interior of the couplings and bushings, including both bushing transitions of figure 2, and the curved outside shoulder of figure 1.",
    "The male pipe thread form, taper and length, the thread relief, and the rounded outside corner of the adapter's socket end, none of which the sheet dimensions.",
    "The brazing ring groove and brazing ring, and the optional ribs of requirement 5."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 4552cefb5ee8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "798 of 872 items agreed. All 79 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "197 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (335 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "56 solids in STEP AP242. 88 of 88 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 17 April 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet leaves the socket diameter and depth, the bore and the wall thickness to MIL-DTL-1183, which is not joined to this package, so every bore, socket and wall of these solids is a stand-in until rebuilt from MIL-DTL-1183.",
    "Model. The tolerance on A, B and F is twice the MIL-DTL-1183 table IV value for the reduced socket end, which this sheet does not print, so the length checks hold each solid to its nominal Table I value only.",
    "Model. Table I gives D minimums of 1.31 for adapter 84 (1), 1.63 for adapter 85 (1-1/4), 2.25 for adapter 87 (2), 2.81 for adapter 88 (2-1/2), below the outside diameter of that pipe size in ASME B36.10M (1.315, 1.660, 2.375, 2.875), while figure 3 draws the D band larger than the thread crests; with D at its minimum these solids carry the band as a neck below the thread cylinder, and an engineer should confirm what D measures."
   ]
  },
  {
   "id": "MIL-DTL-1183/9A w/AMENDMENT 1",
   "slug": "mil-dtl-1183-9a-w-amendment-1",
   "title": "Fittings, pipe, cast bronze, silver-brazing; tee, pipe",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-1183_9A w_AMENDMENT 1 Fittings, pipe",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 20,
   "solids": 232,
   "dimensions": 696,
   "dimensions_met": 696,
   "kind": "Detail specification sheet",
   "dated": "20 August 2019",
   "status": "Active, 17 April 2024",
   "newest": "Revision A Notice 1 - Validation, 17 April 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 15,
   "by_class": {
    "Ohio": 15
   },
   "stock_examples": [
    "4730-00-542-5246, tee, pipe, M1183/9-100-G (Ohio)",
    "4730-00-542-5252, tee, pipe, M1183/9-106-G (Ohio)",
    "4730-00-542-5253, tee, pipe, M1183/9-107-G (Ohio)",
    "4730-00-542-5261, tee, pipe, M1183/9 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-1183_9A w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-1183_9A w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-1183_9A w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-1183_9A w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-1183_9A w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-1183_9A w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-1183_9A w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M1183_9-400N-freecad.png",
    "pair": "Models/views/M1183_9-400N-pair.png",
    "record": "Models/views/M1183_9-400N-record.png",
    "front": "Models/views/M1183_9-400N-front.png",
    "top": "Models/views/M1183_9-400N-top.png",
    "right": "Models/views/M1183_9-400N-right.png",
    "cut": "Models/views/M1183_9-400N-cut.png"
   },
   "shown_part": "M1183/9-400N",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 232 tee codes the sheet dimensions, each as socket code letter N: 17 tees, 14 long turn single sweep and 14 long turn double sweep tees and 103 type A reducing tees (Tables I and IV), 62 type B reducing tees (Tables II and V) and 22 reducing long turn single sweep tees (Tables III and VI), each with the center-to-end dimension of every end measured from its end faces.",
   "not_modeled": [
    "The sheet defines 3,020 part numbers (302 codes, five socket code letters, each with and without -PW); one solid is built per dimensioned code as socket letter N without -PW, and the other part numbers share it.",
    "The 70 reducing long turn single sweep codes whose Table III rows print no K, L or M (604-607, 610-616, 619-627, 630-639, 642-650, 653-661, 664-671, 675-682, 685-690).",
    "The tolerance on the center-to-end dimensions, which this sheet does not print; each is built and checked at its table value.",
    "The socket diameter and depth, the wall, the socket bands and the brazing ring groove of socket codes G, R, A and S, which MIL-DTL-1183 gives, and the brazing ring itself.",
    "The Type A streamlined interior, the Type B interior and the bushings of the type B tees bushed from a larger size.",
    "The taper of the reducing tee bodies in figures 4, 5 and 6, the rounded corners where the outlet joins the run, and the shape of each sweep beyond its center-to-end dimensions.",
    "Material, the lead-free requirement of -PW and the packaging of the brazing rings."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "20 pages, 0 scanned. SHA-256 914055088f3f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,050 of 3,410 items agreed. All 343 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "423 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "20 pages of searchable text, 7 tables (2,528 cells), 8 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "232 solids in STEP AP242. 696 of 696 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 17 April 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table III prints K, L and M on only 22 of its 92 rows; the 70 rows between the first and last row of each run size are blank, and because the printed first and last rows of each run size agree (for example 2.00, 1.18, 2.00 for 3/4 x 3/8 x 3/8 and 3/4 x 3/4 x 1) the values probably apply to every row of the run size, but the sheet does not say so, so codes 604-607, 610-616, 619-627, 630-639, 642-650, 653-661, 664-671, 675-682, 685-690 are not built.",
    "Model. The sheet takes the socket diameter and depth, the wall, the interior and the brazing ring groove from MIL-DTL-1183, which is not joined to this package, so the bores, outside diameters and sweep shapes of every solid are stand-ins until they are rebuilt from MIL-DTL-1183.",
    "Model. The sheet prints no tolerance on the center-to-end dimensions, so the checks hold each solid to its nominal table value only."
   ]
  },
  {
   "id": "MIL-DTL-16377K(SH)",
   "slug": "mil-dtl-16377k-sh",
   "title": "Fixtures, lighting; and associated parts; shipboard use, general specification for",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-16377K(SH) Fixtures, lighting",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 66,
   "solids": 20,
   "dimensions": 615,
   "dimensions_met": 615,
   "kind": "Detail specification",
   "dated": "3 May 2022",
   "status": "Active, 26 May 2023",
   "newest": "Revision K Supplement 1, 26 May 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "6210-01-529-8123, fixture, lighting, MIL-F-16377 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-16377K(SH) package.pdf",
    "scan": "MIL-DTL-16377K(SH) legacy scan.pdf",
    "clean": "MIL-DTL-16377K(SH) clean copy.pdf",
    "record": "MIL-DTL-16377K(SH) validation record.pdf",
    "sheet": "MIL-DTL-16377K(SH) 3D model.pdf",
    "parts": "MIL-DTL-16377K(SH) parts list.pdf",
    "inspection": "MIL-DTL-16377K(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 27, page 63",
   "pictures": {
    "iso": "Models/views/M16377_65-001-freecad.png",
    "pair": "Models/views/M16377_65-001-pair.png",
    "record": "Models/views/M16377_65-001-record.png",
    "front": "Models/views/M16377_65-001-front.png",
    "top": "Models/views/M16377_65-001-top.png",
    "right": "Models/views/M16377_65-001-right.png",
    "cut": "Models/views/M16377_65-001-cut.png"
   },
   "shown_part": "M16377/65-001",
   "application": "FreeCAD 1.1.4",
   "modeled": "Sixteen formed acrylic window solids, one for each military part number M16377/5-001 to M16377/66-002 of Figure 27, with their securing screw holes, counterbores and side notches, plus the long and short securing screws and captive bushings of Figure 3.",
   "not_modeled": [
    "Dimension M of Figure 27 (two lines across the inside of the plan view, M \u00b11/16 apart) is taken as the boundary of the end zones that note 7 finishes white on prismatic windows; the solids carry no feature there and M is not checked.",
    "The prisms on the outside of clear prismatic windows (note 2) are not dimensioned and are not modeled; the note 2 windows are smooth solids.",
    "Edge breaks (1/64 around the window, note 6; break sharp edges on the holes, note 5, and the bushings), the 150 surface finish, the white finish of note 7 and the type VI label of note 8 are not modeled.",
    "The securing screw assemblies of Figure 27 (screws, captive bushings, leather washers, O-rings, nuts and washers of Figures 1 and 2) are not placed in the window solids; the screws and bushings are separate solids.",
    "The outside groove drawn on the long captive bushing at its tapped band has no depth and is not modeled.",
    "Threads are plain cylinders at the 0.190 basic major diameter of #10; the slight lead on the first thread and the alternate screw head (1/64R) are not modeled.",
    "The mounting bushing of Figure 3 (height to suit) and the fixture mounting patterns of Figures 25, 26 and 28 (shock mount hole spacings, flush-mount flange and ceiling opening, incandescent mounting circle) are fixture interfaces, not parts, and are not modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "66 pages, 6 scanned. SHA-256 e597580074f0.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "19,282 of 20,695 items agreed. 68 differences went to a third reader. 2 readings remain open.",
     "result": "2 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "525 checks on size series and limits. 12 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "51 pages of searchable text, 17 tables (1,454 cells), 28 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "20 solids in STEP AP242. 615 of 615 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K Supplement 1, 26 May 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 8, Wavelength label on the spectral locus where it crosses the y 0.600 grid line, between 0.560 and 0.570: read as 0.565, could be 0.585.",
    "Open reading. Figure 8, Wavelength label on the spectral locus at the y 0.200 grid line, between 0.490 and 0.480: read as 0.485, could be 0.465.",
    "Model. Figure 27 does not say what the two M lines in the plan view are; section B-B, cut between an M line and the end, shows the same vee bottom, so the solids treat M as the edge of the note 7 white end finish and an engineer should confirm it marks no change of shape."
   ]
  },
  {
   "id": "MIL-DTL-18866K w/AMENDMENT 1",
   "slug": "mil-dtl-18866k-w-amendment-1",
   "title": "Fittings, hydraulic tube, flared, 37 degree and flareless, general specification for",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-18866K w_AMENDMENT 1 Fittings, hydraulic tube",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 21,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "15 August 2023",
   "status": "Active, 15 August 2023",
   "newest": "Revision K Amendment 1 (amendment incorporated), 15 August 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 17,
   "by_class": {
    "Ohio": 13,
    "Seawolf": 4
   },
   "stock_examples": [
    "4730-00-092-3798, elbow, tube to boss, MIL-DTL-18866 (Ohio)",
    "4730-00-322-8457, adapter, straight, pipe to tube, MIL-DTL-18866 (Ohio)",
    "4730-00-407-0558, adapter, straight, tube to boss, MIL-DTL-18866 (Ohio)",
    "4730-00-491-9576, adapter, straight, tube to boss, MIL-DTL-18866 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-18866K w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-18866K w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-18866K w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-18866K w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "21 pages, 0 scanned. SHA-256 4568ce732761.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "6,668 of 6,695 items agreed. All 15 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "40 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "22 pages of searchable text, 8 tables (337 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-18866 is the general specification for 37 degree flared and flareless hydraulic tube fittings: it defines materials (Table I), finish codes (Table II), workmanship, inspection and sampling (Tables III to VI), nut torque (Table VII) and preset turns (Table VIII), shows typical assemblies and installations without dimensions (Figures 1 to 6), and refers part dimensions to the MS specification sheets.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K Amendment 1 (amendment incorporated), 15 August 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24202A w/AMENDMENT 1",
   "slug": "mil-dtl-24202a-w-amendment-1",
   "title": "Fittings, butt-welding, seamless or welded, 70-30 copper-nickel alloy, 700 psi, 200 \u00b0F",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-24202A w_AMENDMENT 1 Fittings, butt-welding",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 18,
   "solids": 278,
   "dimensions": 5293,
   "dimensions_met": 5291,
   "kind": "Detail specification",
   "dated": "18 May 2021",
   "status": "Active, 21 April 2026",
   "newest": "Revision A Notice 1 - Validation, 21 April 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-01-700-0711, elbow, pipe, M24202TY1,8IN,45LRLTBW (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-24202A w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-24202A w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-24202A w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-24202A w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-24202A w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-24202A w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-24202A w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 13",
   "pictures": {
    "iso": "Models/views/MIL-DTL-24202_tee_4-freecad.png",
    "pair": "Models/views/MIL-DTL-24202_tee_4-pair.png",
    "record": "Models/views/MIL-DTL-24202_tee_4-record.png",
    "front": "Models/views/MIL-DTL-24202_tee_4-front.png",
    "top": "Models/views/MIL-DTL-24202_tee_4-top.png",
    "right": "Models/views/MIL-DTL-24202_tee_4-right.png",
    "cut": "Models/views/MIL-DTL-24202_tee_4-cut.png"
   },
   "shown_part": "MIL-DTL-24202 tee 4",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of all 278 fittings the tables define, one per size: 17 long radius and 15 short radius 90 degree elbows, 17 45 degree elbows, 15 180 degree return bends, 16 straight tees, 15 caps, 61 concentric and 61 eccentric reducers and 61 reducing tees, each with the figure 2 weld end (C bore of wall T for F, 4:1 taper, 1/16 root land and 37-1/2 degree bevel) on every end.",
   "not_modeled": [
    "Type I (seamless) and type II (welded) fittings share each solid; the one weld a type II fitting may carry, and the prohibited weld locations of figure 1, are not modeled.",
    "The 1/8 R minimum radii where the taper meets the C bore and the body bore (figure 2), and the outside corner radii the figures draw at tee crotches and reducer shoulders, which carry no other dimension; those corners are sharp.",
    "The consumable insert form of 3.4.4.1, whose tangents may be omitted.",
    "The inspection points of figures 11 to 15, marking (3.6), material, annealing and finish.",
    "Table V crotch thicknesses for run and branch pairs that Table IV lists no reducing tee for (3 \u00d7 1, 4 \u00d7 1-1/4, 6 \u00d7 2 and 8 \u00d7 3), and the Table VI short radius values for NPS 1/2 and 3/4, which Table I gives no short radius elbow for.",
    "The inside diameters figures 3 to 10 mark as ID carry no value; the solids' end bores are the C bore, the pipe O.D. less two T."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, 0 scanned. SHA-256 33a78af6395f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,877 of 2,942 items agreed. 44 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "342 checks on size series and limits. 10 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "17 pages of searchable text, 6 tables (621 cells), 15 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "278 solids in STEP AP242. 5,291 of 5,293 stated dimensions measure within limits; 2 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 21 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 5, callout on the right-hand vertical dimension: read as C, could be c.",
    "Printed value to confirm. Table I, column 'A / Center to end of 90-degree elbows / Short radius': 1.25 then 1.2. parts/c01/crops/page 6-short-radius-1-1-2.png shows the NPS 1-1/2 short-radius cell printed as 1 1/5, with a plain 5 denominator unlike the 4 of 1-1/4 above it; the printed value looks wrong for its series, since every other short radius equals the NPS (1, 1-1/4, 2, 2-1/2) and 1-1/2 would be expected, which is a point for an engineer.",
    "Model. Table I prints the NPS 1-1/2 short radius A as 1-1/5 where every other short radius equals its NPS (1-1/2 would follow); with D at 5/16 and A at most 1-1/5 + 1/16 the bend radius cannot exceed 0.950, half the 1.900 pipe O.D., so the solid is built with a 1/32 inside radius on the bend and its A checks fail.",
    "Model. Table V gives no crotch thickness for the 3/4 to 1-1/2, 3-1/2, 14 and 16 tees or for any reducing tee with those runs, so those tees are held only to the T minimum of 3.4.3.",
    "Model. Figure 5's branch center-to-end letter is an open reading (C or a smaller c); the straight tees use Table I C for the branch as for the run.",
    "Model. The cap's ellipsoidal profile is set by ASME B16.9, which is not joined to this package; the solids use a 2:1 inside dome."
   ]
  },
  {
   "id": "MIL-DTL-24787/3A(SH)",
   "slug": "mil-dtl-24787-3a-sh",
   "title": "Fittings, end, types C and CL (O-ring seal union), reusable, for flexible hose assemblies",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-24787_3A(SH) Fittings, end",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 15,
   "solids": 83,
   "dimensions": 519,
   "dimensions_met": 519,
   "kind": "Detail specification sheet",
   "dated": "24 September 2020",
   "status": "Active, 22 July 2025",
   "newest": "Revision A Notice 1 - Validation, 22 July 2025",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Ohio": 2
   },
   "stock_examples": [
    "4730-01-192-0417, elbow, hose to boss, MIL-F-24787/3 GR XI TY CL (Ohio)",
    "4730-01-198-2801, adapter, straight, hose to boss, MIL-F-24787/3 GRI TY C (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-24787_3A(SH) package.pdf",
    "scan": "MIL-DTL-24787_3A(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24787_3A(SH) clean copy.pdf",
    "record": "MIL-DTL-24787_3A(SH) validation record.pdf",
    "sheet": "MIL-DTL-24787_3A(SH) 3D model.pdf",
    "parts": "MIL-DTL-24787_3A(SH) parts list.pdf",
    "inspection": "MIL-DTL-24787_3A(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 11",
   "pictures": {
    "iso": "Models/views/M24787_3-CL-SS24135_10-20-1XX-freecad.png",
    "pair": "Models/views/M24787_3-CL-SS24135_10-20-1XX-pair.png",
    "record": "Models/views/M24787_3-CL-SS24135_10-20-1XX-record.png",
    "front": "Models/views/M24787_3-CL-SS24135_10-20-1XX-front.png",
    "top": "Models/views/M24787_3-CL-SS24135_10-20-1XX-top.png",
    "right": "Models/views/M24787_3-CL-SS24135_10-20-1XX-right.png",
    "cut": "Models/views/M24787_3-CL-SS24135_10-20-1XX-cut.png"
   },
   "shown_part": "M24787/3-CL-SS24135/10-20-1XX",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of every type C straight and type CL 90-degree elbow O-ring seal union end fitting in Tables VIII to XI, one per PIN (hose connection, hose specification sheet, hose dash number and nominal tube size), each with the coupling nut's threaded end and hex, the elbow tube where applicable, the nipple hex W and the solid, ring and band or bolt together socket.",
   "not_modeled": [
    "The thread form of T, the O-ring and its groove, and the seal face inside the coupling nut.",
    "The flow passage, hose nipple serrations and socket internal form, which the sheet does not dimension.",
    "The neck between the coupling hex and the socket, the collar behind the ring and band socket, and the socket flats, bands, segments and bolts, which Figure 1 draws but the tables do not dimension.",
    "Dimension X on the type C straight rows of Table XI, which Figure 1 does not place on the straight fitting.",
    "Materials, which the table notes assign to QQ-N-281, QQ-N-286, MIL-C-24723, ASTM A494/A494M, MIL-T-1368, MIL-T-16420 and SAE AMS6381."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, 0 scanned. SHA-256 6b2b6e21a763.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,663 of 3,086 items agreed. All 46 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "347 checks on size series and limits. 12 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 14 tables (648 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "83 solids in STEP AP242. 519 of 519 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 22 July 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table VIII, column 'M ref': 0.77 then 0.75. Page 12 prints 0.77 for -20 x 1-1/4 and 0.75 for -24 x 1-1/4. The printed 0.77 looks wrong for its series: every other 2-3/4-12 UN row in tables VIII to XI, including the same -20 x 1-1/4 row in table XI, gives M as 0.75. A point for an engineer.",
    "Printed value to confirm. Table IX, column 'M ref': 0.62 then 0.61. Page 13 prints 0.62 for -10 and 0.61 for -12. The printed 0.61 looks wrong for its series: every other 1-3/8-12 UNF and 1-3/4-12 UN row gives M as 0.62. The same -12 row also prints thread 1-3/8-12 UNF beside C nom 1.81, which elsewhere goes with 1-3/4-12 UN. A point for an engineer.",
    "Printed value to confirm. Table XI, column 'X max': 4.81 then 4.5. Page 14 prints 4.81 for -20 x 1 and 4.50 for -20 x 1-1/4. The printed 4.50 looks wrong for its series: X is the same for every tube size of one hose size elsewhere in the table (-6 2.47, -12 3.50, -16 4.81, -32 5.81), and 4.50 sits below the smaller -16 rows. A point for an engineer.",
    "Model. Figure 1 letters the bolt together elbow's port face to hose axis height X and shows no H, yet Table XI prints both X max and H max for every elbow (for -32 x 2, X 5.81 and H 6.00) and prints X on straight rows that have no elbow, so an engineer must say what X measures; the model holds the height at the smaller value.",
    "Model. In every row but Table IX -12 the C hex is only 0.055 to 0.13 inch larger than the major diameter of the class 2B (internal) thread T, while Figure 1 draws the threaded end of the coupling nut narrower than the hex, which leaves at most 0.03 to 0.07 inch of wall; an engineer must confirm that C is the across-flats size of the threaded coupling nut."
   ]
  },
  {
   "id": "MIL-DTL-2726C w/AMENDMENT 1",
   "slug": "mil-dtl-2726c-w-amendment-1",
   "title": "Receptacle, receptacle plugs, switch and receptacles, and outlets (electrical), general specification for",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-2726C w_AMENDMENT 1 Receptacle, receptacle plugs",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 21,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "15 February 2019",
   "status": "Active, 1 May 2024",
   "newest": "Revision C Notice 1 - Validation, 1 May 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5935-00-196-2293, plug, tip, M2726-33-002SYM1215- (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-2726C w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-2726C w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-2726C w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-2726C w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "21 pages, 0 scanned. SHA-256 696374f9acfc.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "7,715 of 8,220 items agreed. 51 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "21 pages of searchable text, 5 tables (100 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-2726C w/Amendment 1 is a general specification for shipboard electrical receptacles, plugs, switch and receptacle combinations and outlets that sets materials, construction, performance tests, inspection and sampling, and sends part dimensions to the individual specification sheets (3.1, 3.4); Figures 1 and 2 are test wiring diagrams, not part drawings.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 1 - Validation, 1 May 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 5, List marker: read as I., could be l."
   ]
  },
  {
   "id": "MIL-DTL-2726/33C",
   "slug": "mil-dtl-2726-33c",
   "title": "Receptacle, plug, electrical, 40-AMPERE, 125-VOLT, single pole, male (symbol no. 1214.2 \u2013 red; symbol no. 1214.5 - black)",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-2726_33C Receptacle, plug",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 2,
   "dimensions": 22,
   "dimensions_met": 22,
   "kind": "Detail specification sheet",
   "dated": "01 November 2006",
   "status": "Inactive, 29 December 2022",
   "newest": "Revision C Notice 2 - Validation, 29 December 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5935-00-196-2293, plug, tip, M2726/33-002SYM1214- (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-2726_33C package.pdf",
    "scan": "MIL-DTL-2726_33C legacy scan.pdf",
    "clean": "MIL-DTL-2726_33C clean copy.pdf",
    "record": "MIL-DTL-2726_33C validation record.pdf",
    "sheet": "MIL-DTL-2726_33C 3D model.pdf",
    "parts": "MIL-DTL-2726_33C parts list.pdf",
    "inspection": "MIL-DTL-2726_33C inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M2726_33-002-freecad.png",
    "pair": "Models/views/M2726_33-002-pair.png",
    "record": "Models/views/M2726_33-002-record.png",
    "front": "Models/views/M2726_33-002-front.png",
    "top": "Models/views/M2726_33-002-top.png",
    "right": "Models/views/M2726_33-002-right.png",
    "cut": "Models/views/M2726_33-002-cut.png"
   },
   "shown_part": "M2726/33-002",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of M2726/33-001 (red) and M2726/33-002 (black), which share figure 1: a contact pin .249 in. in diameter projecting 1.062 in. from a 1.031 in. diameter body, split by a .031 in. slot .938 in. long, with a .250 in. bore 1.000 in. long at the rear end and 3.625 in. overall.",
   "not_modeled": [
    "The hex nut and collar at the base of the contact and the ring on the front face of the body, which figure 1 draws without sizes, and the position of the body's front face behind them.",
    "The openings drawn in the rear cut-away other than the .250 bore, and the contact's wire end inside the body, which carry no dimensions.",
    "The rounded nose of the contact pin, which figure 1 draws without a radius.",
    "Body color (red for M2726/33-001, black for M2726/33-002), material (Body-rubber, in accordance with ASTM-D2000, M2AC 710 A13E034 or plastic, in accordance with ASTM-D5948 type MAI-60), contact finish, contact hardness, the 40-ampere, 125-volt, single pole rating, and the contact resistance, uncoupling force and shock requirements.",
    "The metric equivalents in the unlabelled table, which note 2 gives for information only."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 88ab1a256838.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "422 of 445 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "14 checks on size series and limits. 1 break checked against the scan: it is as printed. A later review settled 1 printed value from the document's own conversions.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (64 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 22 of 22 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision C Notice 2 - Validation, 29 December 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The agreed description of figure 1 reads .938 and 1.062 as running from the pin tip to the hex nut and to the front face of the body, while the extension lines on the scan start at the inner end of the slot and at the shoulder of the pin; the solids follow the scan, and no dimension places the hex nut or the body face."
   ]
  },
  {
   "id": "MIL-DTL-28748/3F w/AMENDMENT 4",
   "slug": "mil-dtl-28748-3f-w-amendment-4",
   "title": "Connectors, electrical, rectangular, rack and panel, crimp type removable pin contacts, sizes 16 and 20",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-28748_3F w_AMENDMENT 4 Connectors, electrical",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 16,
   "solids": 17,
   "dimensions": 468,
   "dimensions_met": 467,
   "kind": "Detail specification sheet",
   "dated": "5 August 2021",
   "status": "Active, 5 August 2021",
   "newest": "Revision F Amendment 4 (all previous amendments incorporated), 5 August 2021",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Ohio": 2
   },
   "stock_examples": [
    "5935-01-533-9776, connector, plug, electrical, M28748/3-E0FF1A (Ohio)",
    "5935-01-533-9780, connector, plug, electrical, M28748/3-L0FF2A (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-28748_3F w_AMENDMENT 4 package.pdf",
    "scan": "MIL-DTL-28748_3F w_AMENDMENT 4 legacy scan.pdf",
    "clean": "MIL-DTL-28748_3F w_AMENDMENT 4 clean copy.pdf",
    "record": "MIL-DTL-28748_3F w_AMENDMENT 4 validation record.pdf",
    "sheet": "MIL-DTL-28748_3F w_AMENDMENT 4 3D model.pdf",
    "parts": "MIL-DTL-28748_3F w_AMENDMENT 4 parts list.pdf",
    "inspection": "MIL-DTL-28748_3F w_AMENDMENT 4 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28748_3-H0001L-freecad.png",
    "pair": "Models/views/M28748_3-H0001L-pair.png",
    "record": "Models/views/M28748_3-H0001L-record.png",
    "front": "Models/views/M28748_3-H0001L-front.png",
    "top": "Models/views/M28748_3-H0001L-top.png",
    "right": "Models/views/M28748_3-H0001L-right.png",
    "cut": "Models/views/M28748_3-H0001L-cut.png"
   },
   "shown_part": "M28748/3-H0001L",
   "application": "FreeCAD 1.1.4",
   "modeled": "Seventeen insert solids, one per Figure 2 insert designator A to S under its Table II PIN (M28748/3-x0001L, insert only): the mounting flange with its counterbored square and round mounting holes, the rear body, the .010 front recess, the frame of H, K, P and R, the center through holes of M to S, and a marker hole on every contact position.",
   "not_modeled": [
    "The parts the other PIN positions add, each defined in its own document: shields and clamps (MS18192, MS18193), retaining plates (MS18198 to MS18200), plug and receptacle shells (MS18203, MS18204), jackscrews and guide pins (MS18194 to MS18197), the MS18173 washer and the M39029/34 contacts; each solid stands for every PIN with its insert designator.",
    "The contact cavity profile and the insert material, which MIL-DTL-28748 sets; the contact holes are markers of position only.",
    "Contact lettering and numbering, the Table I contact percentages, and the Figure 1 exploded view, which carries no dimensions."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "16 pages, 9 scanned. SHA-256 01d0298c2154.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,488 of 1,597 items agreed. 43 differences went to a third reader. 4 readings remain open.",
     "result": "4 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "712 checks on size series and limits. 19 breaks checked against the scan: all are as printed. A later review settled 1 printed value from the column's units and limits.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "21 pages of searchable text, 14 tables (794 cells), 12 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "17 solids in STEP AP242. 467 of 468 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 4 (all previous amendments incorporated), 5 August 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 2, Contact letters, second column, rows 8 and 10: read as m; w, could be n; u.",
    "Open reading. Figure 2, Contact letters, left column, row 7: read as AM, could be AN.",
    "Open reading. Figure 2, Contact letters, fifth column, rows 3 and 4: read as Z; i, could be 7; L.",
    "Open reading. Figure 2, Contact letters, sixth column row 6 and eighth column row 5: read as w; m.",
    "Model. Insert B prints '.600 6 EQUAL SPACES' over the column A, C, E, H, K, which holds five contacts at the '.150 TYP' pitch (four spaces of .150 make .600; six spaces would make .100), so the space count must be corrected to 4.",
    "Model. The configuration R detail gives the .195 through hole without a count, while K has four square holes at .117 either side of the centerline; which positions become through holes must be confirmed.",
    "Model. The sheet locates the contacts but gives no contact cavity sizes, so cavity bores must be taken from MIL-DTL-28748 before the solids are used for contact fit."
   ]
  },
  {
   "id": "MIL-DTL-3661/57C",
   "slug": "mil-dtl-3661-57c",
   "title": "Lampholders, lenses, indicator lights, style LC43",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-3661_57C Lampholders, lenses",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 6,
   "dimensions": 150,
   "dimensions_met": 150,
   "kind": "Detail specification sheet",
   "dated": "15 July 2024",
   "status": "Active, 15 July 2024",
   "newest": "Revision C, 15 July 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "6210-01-028-9579, lens, light, MIL-DTL-3661/57 (Ohio, Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-3661_57C package.pdf",
    "scan": "MIL-DTL-3661_57C legacy scan.pdf",
    "clean": "MIL-DTL-3661_57C clean copy.pdf",
    "record": "MIL-DTL-3661_57C validation record.pdf",
    "sheet": "MIL-DTL-3661_57C 3D model.pdf",
    "parts": "MIL-DTL-3661_57C parts list.pdf",
    "inspection": "MIL-DTL-3661_57C inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/LC43YN3-freecad.png",
    "pair": "Models/views/LC43YN3-pair.png",
    "record": "Models/views/LC43YN3-record.png",
    "front": "Models/views/LC43YN3-front.png",
    "top": "Models/views/LC43YN3-top.png",
    "right": "Models/views/LC43YN3-right.png",
    "cut": "Models/views/LC43YN3-cut.png"
   },
   "shown_part": "LC43YN3",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style LC43 square lens, one for each of the six Table I type designations, all the same Figure 1 shape: a 1-7/16 by 1-1/2 lens body face 1/4 thick, a 1.000 +.000 -.010 rear boss ending 13/16 behind the face with a 3/4 by 1/2 obround lamp cavity, two 4-40 captive screw shanks 9/16 long spaced 1.000 by 1.120, and the 5/8 by 3/16 unpainted window imprinted as its own face.",
   "not_modeled": [
    "The rubber gasket between the lens body and the boss, which Figure 1 draws as a thin sheet of the face outline but does not dimension; each solid is one body with the boss starting at the rear of the 1/4 face.",
    "The captive screw heads, the brass bushings and the stepped screw bores Figure 1 draws in dashed lines, and the thread form; the screws are plain shanks fused into the lens body.",
    "The white and gray paint layers and their thicknesses, the unpainted window and cavity of requirements 4, 5 and 9 (the window is carried only as a face boundary), and the marking on the back of the lens.",
    "Lens color, transmittance and material, dripproof sealing, temperature cycling, shock, the surface endurance test of Figure 2 and the fit to the housings of MIL-L-3661/61 to /64 and MIL-DTL-3661/65; color and material are recorded as parameters only.",
    "The \u00b11/64 and \u00b1.015 tolerances are checked but not built as limit-of-size variants."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 1 scanned. SHA-256 1d08181108db.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,000 of 1,011 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "26 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (66 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "6 solids in STEP AP242. 150 of 150 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C, 15 July 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The inch/mm table under Figure 1 lists 31/32 (24.61 mm), which Figure 1 does not print, and has no entry for the 21/32 window position Figure 1 prints; the solids use 21/32, which centers the 3/16 window on the 1-1/2 face height.",
    "Model. Figure 1 draws the 4-40 captive screw heads standing proud of the front face but gives no head style, diameter or height, so the front clearance the lens needs is not defined.",
    "Model. Figure 1 gives no depth for the lamp cavity, so the acrylic thickness between the cavity floor and the window, and the lamp length the cavity accepts, are not defined."
   ]
  },
  {
   "id": "MIL-DTL-38726D w/AMENDMENT 1",
   "slug": "mil-dtl-38726d-w-amendment-1",
   "title": "Adapter assembly, reusable, flexible hose, low pressure",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-38726D w_AMENDMENT 1 Adapter assembly, reusable",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 16,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "4 September 2024",
   "status": "Active, 4 September 2024",
   "newest": "Revision D Amendment 1 (amendment incorporated), 4 September 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-497-4281, adapter, straight, tube to hose, MIL-DTL-38726 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-38726D w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-38726D w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-38726D w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-38726D w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "16 pages, 0 scanned. SHA-256 28759fade217.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,555 of 5,573 items agreed. All 24 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "12 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "16 pages of searchable text, 9 tables (280 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-38726 is a detail specification for reusable low-pressure tube-to-hose adapter assemblies that defines material and finish codes (tables I and II), color coding (table III), operating, proof and burst pressures and minimum bend radius by size (table IV) and qualification and conformance inspection, and its paragraph 3.6.2 leaves all dimensions and tolerances to specification sheet MS27404.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Amendment 1 (amendment incorporated), 4 September 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-38999/21C w/AMENDMENT 2",
   "slug": "mil-dtl-38999-21c-w-amendment-2",
   "title": "Connectors, electrical, circular, threaded, receptacle, box mounting flange, hermetic, hermetic solder contacts, series III, metric",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-38999_21C w_AMENDMENT 2 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 9,
   "dimensions": 162,
   "dimensions_met": 162,
   "kind": "Detail specification sheet",
   "dated": "11 August 2022",
   "status": "Active, 11 August 2022",
   "newest": "Revision C Amendment 2 (all previous amendments incorporated), 11 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5935-01-575-9892, connector, receptacle, electrical, MIL-DTL-38999/21 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-38999_21C w_AMENDMENT 2 package.pdf",
    "scan": "MIL-DTL-38999_21C w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-DTL-38999_21C w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-DTL-38999_21C w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-DTL-38999_21C w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-DTL-38999_21C w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-DTL-38999_21C w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/D38999_21_E-freecad.png",
    "pair": "Models/views/D38999_21_E-pair.png",
    "record": "Models/views/D38999_21_E-record.png",
    "front": "Models/views/D38999_21_E-front.png",
    "top": "Models/views/D38999_21_E-top.png",
    "right": "Models/views/D38999_21_E-right.png",
    "cut": "Models/views/D38999_21_E-cut.png"
   },
   "shown_part": "D38999/21 E",
   "application": "FreeCAD 1.1.4",
   "modeled": "Nine envelope solids of the MIL-DTL-38999/21 hermetic box mounting flange receptacle, one per shell size 9 to 25 (codes A to J), each standing for both classes and every insert arrangement, contact style and polarization: a square flange S by S, 1.9 to 2.6 thick, with four diagonal mounting slots P wide and PP long whose end centers lie on the R1 and R2 squares, and a plain shell standing V max ahead of the flange front face.",
   "not_modeled": [
    "Coupling thread, bore, insert, polarizing keys and the connector front configuration, which the sheet refers to MIL-DTL-38999, MIL-STD-1560 and the procurement specification; the shell is a solid plain cylinder.",
    "The hermetic solder contacts behind the flange, 9.7 max (styles P and X), 10.3 max (styles S and Z) or 3.81 \u00b1 .64 (style C), because their number and positions come from the MIL-STD-1560 insert arrangement.",
    "The red fully mated indicator band, 12.4 / 12.95 from the front edge of the shell to the back edge of the band (note 6), which is a colored band, not geometry.",
    "The flange corners, which the sheet calls chamfered or rounded at 4 places without a size; the solids have sharp corners.",
    "Class, insert arrangement, contact style and polarizing position, which do not change the dimensioned envelope."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 60b0a26b8973.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "338 of 360 items agreed. All 8 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "8 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (72 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 162 of 162 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Amendment 2 (all previous amendments incorporated), 11 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no diameter for the shell or the coupling thread and sends interface dimensions to MIL-DTL-38999, so the shell diameter in the solids is a stand-in equal to R2 that an engineer must replace with the MIL-DTL-38999 series III values before using the solids for fit."
   ]
  },
  {
   "id": "MIL-DTL-5423/1H",
   "slug": "mil-dtl-5423-1h",
   "title": "Boots, dust and water seal, type A (for toggle switches), style 1 (one \u2013 hole mounting, enclosed) style 1S (RFI-shielded, one - hole mounting, enclosed)",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-5423_1H Boots, dust and water seal",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 2,
   "dimensions": 18,
   "dimensions_met": 18,
   "kind": "Detail specification sheet",
   "dated": "21 December 2024",
   "status": "Active, 21 December 2024",
   "newest": "Revision H, 21 December 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5930-01-110-2916, boot, dust and moisture seal, M5423/01-01RED (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-5423_1H package.pdf",
    "scan": "MIL-DTL-5423_1H legacy scan.pdf",
    "clean": "MIL-DTL-5423_1H clean copy.pdf",
    "record": "MIL-DTL-5423_1H validation record.pdf",
    "sheet": "MIL-DTL-5423_1H 3D model.pdf",
    "parts": "MIL-DTL-5423_1H parts list.pdf",
    "inspection": "MIL-DTL-5423_1H inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M5423_01-01-freecad.png",
    "pair": "Models/views/M5423_01-01-pair.png",
    "record": "Models/views/M5423_01-01-record.png",
    "front": "Models/views/M5423_01-01-front.png",
    "top": "Models/views/M5423_01-01-top.png",
    "right": "Models/views/M5423_01-01-right.png",
    "cut": "Models/views/M5423_01-01-cut.png"
   },
   "shown_part": "M5423/01-01",
   "application": "FreeCAD 1.1.4",
   "modeled": "2 envelope solids, one per PIN M5423/01-01 (style 1) and M5423/01-02 (style 1S), both at the Figure 1 dimensions: a .625 hex base to .160 above the panel face with the .020 panel sealing rib below it and the .469-32UNS-2B insert bore through it, a rubber skirt narrowing to the .325 sleeve, the .125 inner constriction, and the .219 bore closed by a dome .644 above the base.",
   "not_modeled": [
    "The boundary between the threaded metal insert and the molded silicone rubber is not modeled; each solid is one envelope.",
    "The style 1S shielding (silicone rubber with molded-in metal or knitted Monel wire mesh) lies inside the envelope and is not modeled, so the two solids are identical; the callout refers to note 4, which this sheet does not print.",
    "The permissible rubber overlay on the hex (.005 max) is not added; the hex is at its nominal size.",
    "The annular recess the figure draws between the hanging sleeve and the skirt, and the chamfer at the top of the hex, are not dimensioned and are not modeled.",
    "The insert thread is not cut; silicone rubber grade 50, the transparent permanent lubricant on the constriction and the panel sealing rib, the 5 inch-ounce restoring force, watertightness and endurance are not geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, 0 scanned. SHA-256 690e662b59cc.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "267 of 296 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 0 tables (0 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 18 of 18 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H, 21 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet does not give the height or length of the .125 inner constriction, which must be tested for watertightness on the toggle lever, and the figure is not to scale (it draws the .469 thread narrower than the .325 sleeve), so its position cannot be scaled from the drawing."
   ]
  },
  {
   "id": "MIL-DTL-55302/66G w/AMENDMENT 2",
   "slug": "mil-dtl-55302-66g-w-amendment-2",
   "title": "Connectors, printed circuit subassembly and accessories: receptacle, socket contacts, decade increments 10 thru 70 contact positions and intermediate positions of 14, 24, 44, 54 and 26, 36, 56, 66 for printed wiring boards (.100 spacing)",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-55302_66G w_AMENDMENT 2 Connectors, printed circuit subassembly and acce",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 150,
   "dimensions": 3720,
   "dimensions_met": 3720,
   "kind": "Detail specification sheet",
   "dated": "26 May 2020",
   "status": "Active, 3 March 2025",
   "newest": "Revision G Notice 2 - Validation, 3 March 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5935-01-068-9400, connector, receptacle, electrical, M55302/66-70L (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-55302_66G w_AMENDMENT 2 package.pdf",
    "scan": "MIL-DTL-55302_66G w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-DTL-55302_66G w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-DTL-55302_66G w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-DTL-55302_66G w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-DTL-55302_66G w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-DTL-55302_66G w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M55302_66-44L-freecad.png",
    "pair": "Models/views/M55302_66-44L-pair.png",
    "record": "Models/views/M55302_66-44L-record.png",
    "front": "Models/views/M55302_66-44L-front.png",
    "top": "Models/views/M55302_66-44L-top.png",
    "right": "Models/views/M55302_66-44L-right.png",
    "cut": "Models/views/M55302_66-44L-cut.png"
   },
   "shown_part": "M55302/66-44L",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid models of all 150 receptacles M55302/66, both contact types at every number of contacts from 10 to 70 with each mounting hardware type L, M, S, F and H: the insulator, the staggered rows of pin entries at their basic positions, the .086-56 male thread and female threaded insert on the contact face, and the turning jackscrews on the rear face.",
   "not_modeled": [
    "The M55302/65 socket contacts, shipped loose (note 8), and the contact cavities and wire holes through the insulator, which the document does not dimension.",
    "The positional tolerances (.006 DIA for the contacts, .008 DIA for the mounting axes); every feature sits at its true position on the .025 grid of note 6.",
    "The screwdriver slots, chamfers and stepped collars drawn on the jackscrews and the male thread, the fixed jackset's recessed socket in the rear face (Detail C), the reliefs beside the jackscrew heads in the end view, the rounded insulator corners and the bonded seam, none of which are dimensioned.",
    "The contact number marking (note 5), the thread forms, and the .282 min hole depth for female guide hardware in note 9, since Figure 1 calls the female hardware threaded.",
    "Materials, plating, forces, contact resistance, voltage and current ratings, and the tools."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 1 scanned. SHA-256 1be95dd18dc4.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "824 of 849 items agreed. All 20 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "38 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (100 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "150 solids in STEP AP242. 3,720 of 3,720 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Notice 2 - Validation, 3 March 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The document does not size the female insert's outside diameter, the depth of the type H internal hex or the shank of the type L and M jackscrews; the models use .130 (the jackscrew diameter the details draw beside it), .050 (scaled from Detail B) and a plain .187 cylinder.",
    "Model. Figure 1 draws type S on the same .187-head jackscrew as types L and M, while Detail A draws the type S jackscrew as a plain .130 cylinder; the models follow Detail A.",
    "Model. The metric equivalents in the dimension table disagree with the inch values: A for 40 contacts prints 2.350 in as (56.69), which is 59.69 mm; B for 44 contacts prints 2.350 in as (56.69), which is 59.69 mm; the inch values govern (note 2) and the models use them."
   ]
  },
  {
   "id": "MIL-DTL-7961E",
   "slug": "mil-dtl-7961e",
   "title": "Lights, indicators, press to test",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-7961E Lights, indicators",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "13 September 2021",
   "status": "Active, 13 September 2021",
   "newest": "Revision E, 13 September 2021",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "6210-00-819-3930, light, indicator, MIL-DTL-7961 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-7961E package.pdf",
    "scan": "MIL-DTL-7961E legacy scan.pdf",
    "clean": "MIL-DTL-7961E clean copy.pdf",
    "record": "MIL-DTL-7961E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 e07e67a160ff.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,822 of 3,833 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 3 tables (18 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-7961E is a general specification for press to test indicator lights that sets materials, finishes, a .375 inch maximum panel thickness, a 1.088 inch lamp length, weight limits and environmental and operating tests, and sends the design and dimensions of each light assembly to the MS25041 and MS25331 sheets.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E, 13 September 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-83528/2G",
   "slug": "mil-dtl-83528-2g",
   "title": "Gasketing material, conductive shielding gasket, electrical, O-ring, standard",
   "class": "Ohio",
   "folder": "Ohio/MIL-DTL-83528_2G Gasketing material, conductive shielding gasket",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 25,
   "dimensions": 200,
   "dimensions_met": 200,
   "kind": "Detail specification sheet",
   "dated": "14 March 2023",
   "status": "Active, 14 March 2023",
   "newest": "Revision G, 14 March 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5999-01-509-2434, shielding gasket, electronic, M83528/002A017 (Ohio)"
   ],
   "files": {
    "package": "MIL-DTL-83528_2G package.pdf",
    "scan": "MIL-DTL-83528_2G legacy scan.pdf",
    "clean": "MIL-DTL-83528_2G clean copy.pdf",
    "record": "MIL-DTL-83528_2G validation record.pdf",
    "sheet": "MIL-DTL-83528_2G 3D model.pdf",
    "parts": "MIL-DTL-83528_2G parts list.pdf",
    "inspection": "MIL-DTL-83528_2G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M83528_002X020-freecad.png",
    "pair": "Models/views/M83528_002X020-pair.png",
    "record": "Models/views/M83528_002X020-record.png",
    "front": "Models/views/M83528_002X020-front.png",
    "top": "Models/views/M83528_002X020-top.png",
    "right": "Models/views/M83528_002X020-right.png",
    "cut": "Models/views/M83528_002X020-cut.png"
   },
   "shown_part": "M83528/002X020",
   "application": "FreeCAD 1.1.4",
   "modeled": "25 solid O-ring gaskets, one per Table I dash number M83528/002X007 to X155, each a torus of round cross section B (.070 or .103) and inside diameter C from .145 to 3.987.",
   "not_modeled": [
    "The molding flash of note 2 (\u00b1.008 on the extension, \u00b1.005 on the thickness), whose nominal size and position the sheet does not give.",
    "The eleven material types A, B, C, D, E, F, H, J, K, L and M that replace the X in the PIN; they share one geometry, so each solid stands for all eleven PINs of its dash number (275 PINs in all).",
    "The additional sizes that footnote 2/ refers to MIL-DTL-83528/5.",
    "The Table II supersession cross-reference to DESC drawing 85105, which carries no geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 93d3e44a3938.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "414 of 429 items agreed. All 17 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "92 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (150 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "25 solids in STEP AP242. 200 of 200 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G, 14 March 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-F-16377/43A(SH)",
   "slug": "mil-f-16377-43a-sh",
   "title": "Fixtures, lighting; filters, plastic, roundel shaped for lantern",
   "class": "Ohio",
   "folder": "Ohio/MIL-F-16377_43A(SH) Fixtures, lighting",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 8,
   "dimensions": 40,
   "dimensions_met": 40,
   "kind": "Military specification sheet",
   "dated": "11 April 1983",
   "status": "Inactive, 14 July 2020",
   "newest": "Revision A Notice 2 - Inactivation, 14 July 2020",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "6210-01-529-8097, filter, light, utility, M16377/43-009 (Ohio)"
   ],
   "files": {
    "package": "MIL-F-16377_43A(SH) package.pdf",
    "scan": "MIL-F-16377_43A(SH) legacy scan.pdf",
    "clean": "MIL-F-16377_43A(SH) clean copy.pdf",
    "record": "MIL-F-16377_43A(SH) validation record.pdf",
    "sheet": "MIL-F-16377_43A(SH) 3D model.pdf",
    "parts": "MIL-F-16377_43A(SH) parts list.pdf",
    "inspection": "MIL-F-16377_43A(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M16377_43-005-freecad.png",
    "pair": "Models/views/M16377_43-005-pair.png",
    "record": "Models/views/M16377_43-005-record.png",
    "front": "Models/views/M16377_43-005-front.png",
    "top": "Models/views/M16377_43-005-top.png",
    "right": "Models/views/M16377_43-005-right.png",
    "cut": "Models/views/M16377_43-005-cut.png"
   },
   "shown_part": "M16377/43-005",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the eight roundel filters, one shape for each size: the outside that Figure 1 dimensions, a flat back, a cylindrical edge and a spherical dome, filled solid between them; 4.410 in across for M16377/43-001 to -004 and 5.650 in across for M16377/43-005 to -008.",
   "not_modeled": [
    "The inside of the filter: the sheet dimensions only its outside, and a dome formed from acrylic sheet would be hollow behind the domed face, with a wall the sheet does not give.",
    "The 1/32 dimension printed across the lower edge of the flat back, which the figure does not tie to a feature.",
    "The colour of each dash number and its luminous transmittance (Table I and Table II), the anti-static coating on the outside of the filter, and the heat-resistant acrylic plastic to MIL-P-24191.",
    "The hand lantern, gasket and lamp in the assembly view, and the tolerances MIL-F-16377 paragraph 3.5.2 sets for dimensions the sheet does not tolerance."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 0687db82a4eb.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "236 of 251 items agreed. All 12 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "7 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 3 tables (50 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "8 solids in STEP AP242. 40 of 40 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision A Notice 2 - Inactivation, 14 July 2020.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet dimensions only the outside of the filter, so the solids are filled behind the dome; the material it names, MIL-P-24191, covers cast acrylic sheet, and inside the outer circle the end view draws a dashed circle with a solid circle just inside it, as a dome formed from sheet shows from its hollow back, so an engineer must confirm whether the filter is formed hollow and set its wall thickness.",
    "Model. The figure prints 1/32 across the lower edge of the flat back, opposite the .045\u00b1.005 edge thickness at the upper edge, without naming the feature it measures, so the solids do not carry it and an engineer must identify it, for example as the wall of a formed dome."
   ]
  },
  {
   "id": "MIL-F-18280F",
   "slug": "mil-f-18280f",
   "title": "Fittings, flareless tube, fluid connection",
   "class": "Ohio",
   "folder": "Ohio/MIL-F-18280F Fittings, flareless tube",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 33,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "31 July 1995",
   "status": "Canceled, 18 June 1999",
   "newest": "Revision F Notice 1 - Cancellation, 18 June 1999",
   "superseding": "SAE-AS18280",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-F-18280F package.pdf",
    "scan": "MIL-F-18280F legacy scan.pdf",
    "clean": "MIL-F-18280F clean copy.pdf",
    "record": "MIL-F-18280F validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "33 pages, all scanned. SHA-256 561c2faae7cd.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "7,359 of 7,400 items agreed. All 35 differences were settled against the page image. A second pass settled 1 from a second printing in the document.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "241 checks on size series and limits. 11 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "23 pages of searchable text, 13 tables (450 cells), 7 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-F-18280F is the general specification for flareless tube fittings, nuts and sleeves and has no dimensioned part drawing: it sets materials, finishes, marking, test tubing and pressures, minimum openings, joint strength loads, torques and inspections, and leaves the design and dimensions of fittings, nuts and sleeves to the applicable MS and AS standards (1.2, 3.3); its figures show only inspection details and test rigs.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision F Notice 1 - Cancellation, 18 June 1999.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table IX on page 16 prints .025 inch as the tube OD of its third row, between .188 and .313. With its .020 wall this row is the .250 inch (-4) tube that Tables III and IV list in the same place, so .025 looks like a misprint for .250.",
    "Printed value to confirm. Table X on page 18 prints 195 inch-pounds as the minimum torque for size -3, above that row's maximum of 105. In every other row the minimum is a little below the maximum (50 and 60 for -2, 135 and 145 for -4), so 195 looks like a misprint for 95."
   ]
  },
  {
   "id": "MIL-F-5509D",
   "slug": "mil-f-5509d",
   "title": "Fittings, flared tube, fluid connection",
   "class": "Ohio",
   "folder": "Ohio/MIL-F-5509D Fittings, flared tube",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 18,
   "solids": 14,
   "dimensions": 41,
   "dimensions_met": 41,
   "kind": "Military specification",
   "dated": "16 June 1978",
   "status": "Canceled, 30 September 1998",
   "newest": "Revision D Notice 2 - Cancellation, 30 September 1998",
   "superseding": "Notice 2 for Additional Superseding Information",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-510-7192, adapter, straight, tube to boss, MIL-F-5509 (Ohio)"
   ],
   "files": {
    "package": "MIL-F-5509D package.pdf",
    "scan": "MIL-F-5509D legacy scan.pdf",
    "clean": "MIL-F-5509D clean copy.pdf",
    "record": "MIL-F-5509D validation record.pdf",
    "sheet": "MIL-F-5509D 3D model.pdf",
    "parts": "MIL-F-5509D parts list.pdf",
    "inspection": "MIL-F-5509D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure I, page 8",
   "pictures": {
    "iso": "Models/views/MIL-F-5509_sleeve_test_die_size_32-freecad.png",
    "pair": "Models/views/MIL-F-5509_sleeve_test_die_size_32-pair.png",
    "record": "Models/views/MIL-F-5509_sleeve_test_die_size_32-record.png",
    "front": "Models/views/MIL-F-5509_sleeve_test_die_size_32-front.png",
    "top": "Models/views/MIL-F-5509_sleeve_test_die_size_32-top.png",
    "right": "Models/views/MIL-F-5509_sleeve_test_die_size_32-right.png",
    "cut": "Models/views/MIL-F-5509_sleeve_test_die_size_32-cut.png"
   },
   "shown_part": "MIL-F-5509 sleeve test die size 32",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the Figure 2 fixture for the 4.4.4 sleeve expansion test: the die for each of the 13 chart sizes (2 to 32), a ring with the A bore, B outside diameter and C height, and the 2-1/2 diameter, 33 degree point of the arbor that serves all sizes.",
   "not_modeled": [
    "The fittings, nuts and sleeves the specification covers: 3.2 leaves their design and dimensions to the applicable drawings, and their bosses and tube and hose ends to MS24385, MS24386, MS33649, MS33656, MS33657, MS33658 or MS33677.",
    "The arbor above its point, which Figure 2 leaves optional to suit the design of the equipment and gives no length, and the hidden lines drawn inside it.",
    "The sleeve drawn dashed in the die, the Table IV arbor loads (recorded with each die as a parameter) and the 4.4.4 limit on the expanded diameter, the minimum minor diameter of the AN818 nut thread.",
    "Die and arbor material, hardness and finish, which the document does not give."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, all scanned. SHA-256 215dde5926ac.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,870 of 4,085 items agreed. 82 differences went to a third reader. A second pass settled 1 from the sheet's layout (a point the scan did not print). 6 readings remain open.",
     "result": "6 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "67 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 16 tables (313 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "14 solids in STEP AP242. 41 of 41 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision D Notice 2 - Cancellation, 30 September 1998. ASSIST also holds Revision D Amendment 4 (30 November 1987). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 6, row 3, column 4: read as 1/ QQ-B-728 Half hard, could be 1/ QQ-B-726 Half hard.",
    "Open reading. Page 6, row 3, column 1: read as OQ-S-225/6 (2024), could be QQ-S-225/6 (2024).",
    "Open reading. Page 8, last line: read as [illegible] conforming to MIL-H-6083..",
    "Open reading. Page 8, Start of paragraph and first visible line: read as [illegible] steel fittings, nuts, and sleeves shall be [illegible] accordance with.",
    "Open reading. Figure I, Caption: read as GRAIN FLOW.",
    "Open reading. Figure I, callouts: read as MAJOR DIAMETER; MINOR DIAMETER; PITCH DIAMETER.",
    "Printed value to confirm. The chart under Figure 2 on page 13 prints .34 for the minimum die height C at size 10, between .59 at size 8 and .68 at size 12. The value is about half of its neighbors, while every other step in the column holds or rises with size.",
    "Model. The chart prints C .34 min for the size 10 die, below the .46 of size 2 and about half of the .59 at size 8 and .68 at size 12, while the rest of the column holds or rises with size apart from a .01 dip at size 28; the size 10 die is built .34 high as printed, and an engineer must confirm the value before the die is made."
   ]
  },
  {
   "id": "MIL-P-43940A",
   "slug": "mil-p-43940a",
   "title": "*Pans, steam table, rectangular and insets, steam table, round",
   "class": "Ohio",
   "folder": "Ohio/MIL-P-43940A *pans, steam table",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "31 December 1985",
   "status": "Canceled, 31 August 1993",
   "newest": "Revision A Notice 2 - Cancellation, 31 August 1993",
   "superseding": "A-A-50179",
   "preparing_activity": "U.S. Army Combat Capabilities Development Command Soldier Center",
   "stock_numbers": 2,
   "by_class": {
    "Ohio": 2
   },
   "stock_examples": [
    "7310-00-238-5164, pan, steam table, MIL-P-43940 (Ohio)",
    "7310-00-834-4485, pan, steam table, MIL-P-43940 (Ohio)"
   ],
   "files": {
    "package": "MIL-P-43940A package.pdf",
    "scan": "MIL-P-43940A legacy scan.pdf",
    "clean": "MIL-P-43940A clean copy.pdf",
    "record": "MIL-P-43940A validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, all scanned. SHA-256 876cf460ee0f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,837 of 2,843 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "44 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 4 tables (230 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-P-43940A is the military specification for rectangular steam table pans in the 12 by 20 inch series (Style I, sizes 1 to 21, from the 32 quart soup tureen to the one-ninth size pan) and the round inset (Style II, size 22), and it has no drawing: Table I gives each size only an outside depth (+0, -1/8 inch, a dash for the inset), a capacity (plus or minus 10 percent) and starting and minimum metal thicknesses; paragraph 3.3.1 requires only that the pans, alone or combined, fill an opening 11-7/8 by 19-7/8 inches (plus 1/8, minus 0) with flanges that cover it, square corners or a 3/8 inch maximum radius, and sides tapered to nest, and gives no pan length, width, flange width or taper; the tureen gets only the full size opening and a shoulder that limits its depth below it to 6 inches (3.3.2), the inset only a body that fits a 6-1/2 inch diameter opening below its shoulder (3.3.3); and paragraph 3.1 makes every pan and inset the manufacturer\u2019s commercial standard product.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 2 - Cancellation, 31 August 1993.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-15160/3J w/AMENDMENT 1",
   "slug": "mil-prf-15160-3j-w-amendment-1",
   "title": "Fuses, instrument, power, and telephone (nonindicating), style F03",
   "class": "Ohio",
   "folder": "Ohio/MIL-PRF-15160_3J w_AMENDMENT 1 Fuses, instrument",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 102,
   "dimensions": 714,
   "dimensions_met": 714,
   "kind": "Performance specification sheet",
   "dated": "6 November 2019",
   "status": "Active, 17 September 2024",
   "newest": "Revision J Notice 1 - Validation, 17 September 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5920-01-511-1824, fuse, cartridge, MIL-PRF-15160/3 (Ohio)"
   ],
   "files": {
    "package": "MIL-PRF-15160_3J w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-15160_3J w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-15160_3J w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-15160_3J w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-15160_3J w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-15160_3J w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-15160_3J w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/F03B250V3_10A-freecad.png",
    "pair": "Models/views/F03B250V3_10A-pair.png",
    "record": "Models/views/F03B250V3_10A-record.png",
    "front": "Models/views/F03B250V3_10A-front.png",
    "top": "Models/views/F03B250V3_10A-top.png",
    "right": "Models/views/F03B250V3_10A-right.png",
    "cut": "Models/views/F03B250V3_10A-cut.png"
   },
   "shown_part": "F03B250V3/10A",
   "application": "FreeCAD 1.1.4",
   "modeled": "102 envelope solids of the style F03 cartridge fuse, one per type designation in Table I (51 ratings, each with nickel and silver plated ferrules), all on the single Figure 1 body size: two ferrules of diameter B and length C on a body of diameter D, overall length A.",
   "not_modeled": [
    "The inside of the fuse: tube bore and wall, fuse element, filler and the joint where each ferrule caps the tube.",
    "The rounded ferrule edges drawn in Figure 1, which carry no radius.",
    "Materials (brass, copper or copper alloy ferrules; plastic or ceramic tube), plating, marking and the 2 inch-pound ferrule torque strength.",
    "Electrical ratings, overload and short circuit interrupt times, shock and vibration requirements in Table I and the requirements list."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 91257cbbdc09.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,142 of 1,622 items agreed. All 19 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "110 checks on size series and limits. 12 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 7 tables (1,011 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "102 solids in STEP AP242. 714 of 714 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J Notice 1 - Validation, 17 September 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table V, column 'Superseded numbers for CAGE / 75915': 390001 then 390.25. Page 8 prints 390001 then 390.250 for F03B250V1 1/4A. The printed value itself looks wrong for its series: 390.250 is the same number the column gives the 1/4A fuse (row F03B250V1/4A), and the pattern of the column (3941.25 for the characteristic A fuse) and the neighbouring 75915 column (3231.25) point to 3901.25. The rows for 1 1/2A (390.500) and 1 6/10A (390.600) repeat the 1/2A and 6/10A numbers the same way. A point for an engineer."
   ]
  },
  {
   "id": "MIL-PRF-15733/73C w/AMENDMENT 1",
   "slug": "mil-prf-15733-73c-w-amendment-1",
   "title": "Filters, radio frequency interference, hermetically sealed, style FL55",
   "class": "Ohio",
   "folder": "Ohio/MIL-PRF-15733_73C w_AMENDMENT 1 Filters, radio frequency interference",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 69,
   "dimensions": 697,
   "dimensions_met": 697,
   "kind": "Performance specification sheet",
   "dated": "8 October 2025",
   "status": "Active, 8 October 2025",
   "newest": "Revision C Amendment 1 (amendment incorporated), 8 October 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5915-01-531-6387, filter, radio frequency interfere, M15733/73-0038 (Ohio)"
   ],
   "files": {
    "package": "MIL-PRF-15733_73C w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-15733_73C w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-15733_73C w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-15733_73C w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-15733_73C w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-15733_73C w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-15733_73C w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M15733_73-0062-freecad.png",
    "pair": "Models/views/M15733_73-0062-pair.png",
    "record": "Models/views/M15733_73-0062-record.png",
    "front": "Models/views/M15733_73-0062-front.png",
    "top": "Models/views/M15733_73-0062-top.png",
    "right": "Models/views/M15733_73-0062-right.png",
    "cut": "Models/views/M15733_73-0062-cut.png"
   },
   "shown_part": "M15733/73-0062",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of all 69 style FL55 filters, M15733/73-0001 to -0069: the cylindrical case, the threaded mounting bushing with its end boss, and the two terminals (flat lugs with hole or slot H for configuration 1, threaded studs for configuration 2).",
   "not_modeled": [
    "The mounting nut and lockwasher supplied with each filter (note 3) and the nuts on the configuration 2 terminal studs, which the sheet draws but does not dimension.",
    "Thread form of the mounting and terminal threads, and the recommended mounting torque.",
    "The shoulder drawn at the mounting end of the case and the collar drawn at the left end of configuration 2, which carry no dimensions.",
    "The optional bend of the configuration 1 lugs (note 5).",
    "Case marking, including the C or L terminal symbol of note 4, and the case finish.",
    "Internal construction and the circuits and electrical ratings of Table I (circuit, rated current, insertion loss), which are recorded as parameters only."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 37c4870b3a7c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,466 of 2,500 items agreed. All 26 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1,137 checks on size series and limits. 88 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 4 tables (1,814 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "69 solids in STEP AP242. 697 of 697 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Amendment 1 (amendment incorporated), 8 October 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no length for the C boss at the end of the mounting bushing, so the usable mounting thread length within E is not defined.",
    "Model. The sheet gives no width or thickness for the configuration 1 solder lugs."
   ]
  },
  {
   "id": "MIL-PRF-19500/436B W/AMENDMENT 1",
   "slug": "mil-prf-19500-436b-w-amendment-1",
   "title": "Semiconductor device, diode, silicon, voltage-variable capacitor types 1N5461B through 1N5476B, and 1N5461C through 1N5476C JAN, jantx, and jantxv",
   "class": "Ohio",
   "folder": "Ohio/MIL-PRF-19500_436B W_AMENDMENT 1 Semiconductor device, diode",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 10,
   "solids": 1,
   "dimensions": 11,
   "dimensions_met": 11,
   "kind": "Performance specification sheet",
   "dated": "10 October 2023",
   "status": "Active, 10 October 2023",
   "newest": "Revision B Amendment 1 (amendment incorporated), 10 October 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5961-01-051-5796, semiconductor device, diode, MIL-PRF-19500/436 (Ohio)"
   ],
   "files": {
    "package": "MIL-PRF-19500_436B W_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-19500_436B W_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-19500_436B W_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-19500_436B W_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-19500_436B W_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-19500_436B W_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-19500_436B W_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/MIL-PRF-19500_436_axial-freecad.png",
    "pair": "Models/views/MIL-PRF-19500_436_axial-pair.png",
    "record": "Models/views/MIL-PRF-19500_436_axial-record.png",
    "front": "Models/views/MIL-PRF-19500_436_axial-front.png",
    "top": "Models/views/MIL-PRF-19500_436_axial-top.png",
    "right": "Models/views/MIL-PRF-19500_436_axial-right.png",
    "cut": "Models/views/MIL-PRF-19500_436_axial-cut.png"
   },
   "shown_part": "MIL-PRF-19500/436 axial",
   "application": "FreeCAD 1.1.4",
   "modeled": "One envelope solid of the axial package of figure 1 (similar to DO-7), standing for all 96 PINs (32 types at JAN, JANTX and JANTXV): a round body .0925 in diameter and .2475 long with square ends, and a .020 diameter lead 1.250 long on the axis from each end of the body.",
   "not_modeled": [
    "Each PIN is not a separate solid: 6.5.1 lists 48 B suffix PINs and makes the C suffix PINs by replacing B with C, 96 in all, and every one has the same outline, so one solid stands for them.",
    "The LL1 zone (.050 max) next to each end of the body, where note 4 lets the lead diameter vary for lead finishes and irregularities: the solid holds LD through the zone, so LL1 has no check.",
    "The optional package contour and any heat slugs that note 3 allows within the BD by BL cylinder: the body is the plain cylinder.",
    "The inside of the device (die, bonds and seal): the solid is the outside shape as one body.",
    "Lead finish (3.4.1 and QPDSIS-19500), marking, the cathode color band of 3.5, and the electrical ratings and tests, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "10 pages, 0 scanned. SHA-256 9957781add6c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,161 of 2,175 items agreed. All 12 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "202 checks on size series and limits. 6 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 8 tables (421 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "1 solid in STEP AP242. 11 of 11 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Amendment 1 (amendment incorporated), 10 October 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-22885/80J",
   "slug": "mil-prf-22885-80j",
   "title": "Switch, pushbutton, illuminated, 4-LAMP solid mount, RFI shielded, moisture sealed, high impact shock resistant",
   "class": "Ohio",
   "folder": "Ohio/MIL-PRF-22885_80J Switch, pushbutton",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 12,
   "dimensions": 77,
   "dimensions_met": 77,
   "kind": "Performance specification sheet",
   "dated": "9 November 2020",
   "status": "Inactive, 31 January 2026",
   "newest": "Revision J Notice 1 - Inactivation, 31 January 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 5,
   "by_class": {
    "Ohio": 2,
    "Seawolf": 3
   },
   "stock_examples": [
    "5930-01-101-4727, switch, push, M22885/80-AACR (Ohio)",
    "6210-01-281-9932, light, indicator, M22885/80-26RR-17 (Ohio)",
    "5930-01-101-1096, switch, push, M22885/80-FACY (Seawolf)",
    "6220-01-389-8933, light, indicator, M22885/80-FECG (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-22885_80J package.pdf",
    "scan": "MIL-PRF-22885_80J legacy scan.pdf",
    "clean": "MIL-PRF-22885_80J clean copy.pdf",
    "record": "MIL-PRF-22885_80J validation record.pdf",
    "sheet": "MIL-PRF-22885_80J 3D model.pdf",
    "parts": "MIL-PRF-22885_80J parts list.pdf",
    "inspection": "MIL-PRF-22885_80J inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M22885_80-AAC-freecad.png",
    "pair": "Models/views/M22885_80-AAC-pair.png",
    "record": "Models/views/M22885_80-AAC-record.png",
    "front": "Models/views/M22885_80-AAC-front.png",
    "top": "Models/views/M22885_80-AAC-top.png",
    "right": "Models/views/M22885_80-AAC-right.png",
    "cut": "Models/views/M22885_80-AAC-cut.png"
   },
   "shown_part": "M22885/80-AAC",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-PRF-22885/80 switch in its nine configurations (types 1, 2 and 3 as complete assembly, plug-in switch/indicator assembly and housing only, from figures 1 to 3), and the three crimp-type terminals M22885/80-50, -51 and -52 of figure 5 with their A DIA barrel and B DIA wire bore.",
   "not_modeled": [
    "Separate solids for each switch part number: the 12 assembly and plug-in configuration codes of table IV with the 5 contact actions of table V and the 12 lens style codes of table VI, plus three housings, give 723 part numbers, more than 400, and none but the configuration changes an outside dimension; each type and configuration is built once with contact action A and lens style C, and the codes without front lens plate (B, D, G, J, N, Q) share the envelope of the codes with it.",
    "The mounting fastener (the clamps and screws drawn beside the body and beyond the bezel outline in the front views) and the 0 to .250 panel thickness range it clamps; the panel cut-outs are checked as fits rather than modeled.",
    "The panel moisture seal under the flange, the integral lampboard moisture seal, the sloped bezel faces, the lens window, lens plate, lamps, RFI screen and grounding contact, and the lens and switch modules as separate shapes inside the envelope.",
    "The 25-position terminal block layout, terminal pins and locating pin of figures 3 and 4, which carry no dimensions.",
    "The shapes of the terminal's split pin, collar and retention clip, of which figure 5 gives only the .400 pin section length; the wire sizes of the terminal table; and the weight limits of 3.0, 3.5 and 2.5 ounces."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, 3 scanned. SHA-256 9cfd7e1971dc.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "956 of 1,025 items agreed. All 38 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "14 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 10 tables (240 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "12 solids in STEP AP242. 77 of 77 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision J Notice 1 - Inactivation, 31 January 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 2 gives no section for the type 2 housing body behind the panel; the model uses the figure 1 body, .975 MAX square, which passes the 1.250 by .990 type 2 cut-out but is narrower than the .990 type 2 front.",
    "Model. Table V footnote 2/ (not available with type 3 switches) has no reference mark in the table, so it does not say which contact action type 3 lacks; the type 3 solids use contact action A."
   ]
  },
  {
   "id": "MIL-PRF-22885/87E",
   "slug": "mil-prf-22885-87e",
   "title": "Switch, push button, illuminated, 4 lamp, solid mount, modular constructed, high impact shock",
   "class": "Ohio",
   "folder": "Ohio/MIL-PRF-22885_87E Switch, push button",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 300,
   "dimensions": 3450,
   "dimensions_met": 3450,
   "kind": "Performance specification sheet",
   "dated": "19 February 2025",
   "status": "Active, 19 February 2025",
   "newest": "Revision E, 19 February 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Ohio": 2
   },
   "stock_examples": [
    "6220-01-357-9042, light, indicator, M22885/87-MAGGGG (Ohio)",
    "6220-01-357-9043, light, indicator, M22885/87-MARRRR (Ohio)"
   ],
   "files": {
    "package": "MIL-PRF-22885_87E package.pdf",
    "scan": "MIL-PRF-22885_87E legacy scan.pdf",
    "clean": "MIL-PRF-22885_87E clean copy.pdf",
    "record": "MIL-PRF-22885_87E validation record.pdf",
    "sheet": "MIL-PRF-22885_87E 3D model.pdf",
    "parts": "MIL-PRF-22885_87E parts list.pdf",
    "inspection": "MIL-PRF-22885_87E inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M22885_87-DE-freecad.png",
    "pair": "Models/views/M22885_87-DE-pair.png",
    "record": "Models/views/M22885_87-DE-record.png",
    "front": "Models/views/M22885_87-DE-front.png",
    "top": "Models/views/M22885_87-DE-top.png",
    "right": "Models/views/M22885_87-DE-right.png",
    "cut": "Models/views/M22885_87-DE-cut.png"
   },
   "shown_part": "M22885/87-DE",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 300 PINs M22885/87-XY (30 Table II codes by 10 Table III codes): the 1.200 by .960 mounting flange, the front lens plate where Table II includes it, the 1.090 by .850 body to the switch mounting plane, and behind it the plunger stop to 1.900 MAX (Table III A and F, indicator light only) or the MIL-PRF-22885/88 switch module envelope of 1.344 MAX (all other Table III codes).",
   "not_modeled": [
    "Internal parts, which Note 3 leaves optional inside the envelope: lamp module, the four T-1-3/4 lamps, diffuser, EMI screen and the four MIL-PRF-22885/12 color filters.",
    "Lamp terminals H, C and B and their positions (Notes 2 and 7), and the lamp module lock and its .546 location (design optional, Note 5).",
    "Panel mounting means for .050 to .250 panels (Note 4), the switch module mounting clip and the switch retaining device (Note 8).",
    "The plunger as a separate feature and its travel in Figure 2 (.100 MAX free position, .190 extended position from the switch mounting plane); it lies inside the plunger stop or switch module envelope.",
    "The front lens plate locator notch and edge chamfers of Figure 2, and all corner radii.",
    "The recommended lens engraving area (1.040 by .800), the lamp circuit schematic and PIN marking, lens styles (Figure 5), lamp circuits (Figure 6), switch action, EMI screen and filter colors (Tables II to IV), which change no outside dimension.",
    "The panel cutouts of Figure 3 (1.115 by .875, 1.210 and .970 TYP matrix pitch, .130 MIN and .450 MIN spacing), checked as fits rather than modeled, and the .130 lb and .180 lb weight limits."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, 3 scanned. SHA-256 c2cae6543512.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,664 of 1,667 items agreed. All 3 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "13 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 4 tables (314 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "300 solids in STEP AP242. 3,450 of 3,450 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E, 19 February 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1's side view gives the front lens plate as .610/.630 high, but the recommended lens engraving area on the front view is .800 high, and no width is given for the plate; the model follows .610/.630 and uses 1.040 for the width.",
    "Model. At the top of the \u00b1.016 general tolerance the 1.200 by .960 flange reaches 1.216 by .976, more than the 1.210 and .970 TYP matrix pitch of Figure 3, so adjacent flanges in a matrix could touch.",
    "Model. Figure 1's callouts refer to notes 6, 7, 9 and 10 (panel thickness, lamp module lock, lamp terminals, mounting clip), but the notes run 1 to 8 and notes 6 and 7 cover other subjects, so the callouts appear to point to an older note numbering."
   ]
  },
  {
   "id": "MIL-PRF-23419/9D w/AMENDMENT 2",
   "slug": "mil-prf-23419-9d-w-amendment-2",
   "title": "Fuse cartridge, instrument type, style FM09, (nonindicating)",
   "class": "Ohio",
   "folder": "Ohio/MIL-PRF-23419_9D w_AMENDMENT 2 Fuse cartridge, instrument type",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 9,
   "solids": 71,
   "dimensions": 852,
   "dimensions_met": 852,
   "kind": "Performance specification sheet",
   "dated": "1 July 2020",
   "status": "Active, 15 April 2025",
   "newest": "Revision D Notice 1 - Validation, 15 April 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5920-01-519-4750, fuse, cartridge, MIL-PRF-23419/9 (Ohio)"
   ],
   "files": {
    "package": "MIL-PRF-23419_9D w_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-23419_9D w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-23419_9D w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-23419_9D w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-23419_9D w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-23419_9D w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-23419_9D w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/FM09B250V1_2A-freecad.png",
    "pair": "Models/views/FM09B250V1_2A-pair.png",
    "record": "Models/views/FM09B250V1_2A-record.png",
    "front": "Models/views/FM09B250V1_2A-front.png",
    "top": "Models/views/FM09B250V1_2A-top.png",
    "right": "Models/views/FM09B250V1_2A-right.png",
    "cut": "Models/views/FM09B250V1_2A-cut.png"
   },
   "shown_part": "FM09B250V1/2A",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style FM09 cartridge fuse, one for each of the 71 PINs that Table I or Table IV prints (23 characteristic A, 48 characteristic B), all the same Figure 1 shape: two .250 diameter ferrules .250 long on a .230 body, 1.25 overall.",
   "not_modeled": [
    "The \"S\" silver-plated form of each PIN (Table I footnote 3) shares the solid of its PIN, because plating changes no dimension; the sheet defines 142 part numbers with and without S.",
    "The internals: the plastic or ceramic tube bore, the fuse element and the part of the tube inside each ferrule, none of which Figure 1 dimensions; each solid is one body.",
    "The rounded corners Figure 1 draws on the ferrule ends and at the ferrule rims, which carry no dimension.",
    "Material (brass, copper or copper alloy ferrules; plastic or ceramic body), the nickel, bright alloy or silver plate, terminal strength and every electrical rating; the voltage and current of each PIN are recorded as parameters only.",
    "The MIL-PRF-19207 fuseholders the sheet lists as applicable."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 2 scanned. SHA-256 62847cd35bbf.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,674 of 1,686 items agreed. 9 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "180 checks on size series and limits. 7 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 7 tables (808 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "71 solids in STEP AP242. 852 of 852 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 15 April 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 3, Horizontal axis title: read as AMBIENT TEMPERATURE - DEGREES \u00b0C, could be AMBIENT TEMPERATURE - DEGREES C.",
    "Printed value to confirm. Table I, column 'Cold resistance 2/ (ohms) / Minimum': 0.0059 then 0.007. Page 4 prints .0059 for 7 A and .0070 for 8 A. The minimum runs .0071, .0059, .0070, .0056 from 6-1/4 A to 10 A while the maximum falls evenly (.0450, .0300, .0200, .0140), so the 8 A minimum (or the 7 A minimum) looks out of series and is a point for an engineer.",
    "Model. Table I rates the 11 characteristic B fuses of 4 A to 30 A at 125 V (FM09B125V4A to FM09B125V30A), but Table IV prints their superseding PINs at 250 V (FM09B250V4A to FM09B250V30A); a solid is built under each spelling.",
    "Model. Table IV lists FM09B250V2/10A, FM09B250V4/10A and FM09B250V7/10A, which have no Table I ratings, and leaves out Table I's FM09A250V1-1/4A, FM09A250V4A and FM09B250V8/10A; a solid is built for every PIN either table prints."
   ]
  },
  {
   "id": "MIL-PRF-39003/1L",
   "slug": "mil-prf-39003-1l",
   "title": "Capacitor, fixed, electrolytic (solid electrolyte), tantalum, (polarized, sintered slug), established reliability, style CSR13",
   "class": "Ohio",
   "folder": "Ohio/MIL-PRF-39003_1L Capacitor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 35,
   "solids": 8,
   "dimensions": 88,
   "dimensions_met": 88,
   "kind": "Performance specification sheet",
   "dated": "13 July 2021",
   "status": "Active, 29 April 2026",
   "newest": "Revision L Notice 1 - Validation, 29 April 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5910-01-497-7906, capacitor, fixed, electrolytic, M39003/01-6045 (Ohio)"
   ],
   "files": {
    "package": "MIL-PRF-39003_1L package.pdf",
    "scan": "MIL-PRF-39003_1L legacy scan.pdf",
    "clean": "MIL-PRF-39003_1L clean copy.pdf",
    "record": "MIL-PRF-39003_1L validation record.pdf",
    "sheet": "MIL-PRF-39003_1L 3D model.pdf",
    "parts": "MIL-PRF-39003_1L parts list.pdf",
    "inspection": "MIL-PRF-39003_1L inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39003_01_case_B-freecad.png",
    "pair": "Models/views/M39003_01_case_B-pair.png",
    "record": "Models/views/M39003_01_case_B-record.png",
    "front": "Models/views/M39003_01_case_B-front.png",
    "top": "Models/views/M39003_01_case_B-top.png",
    "right": "Models/views/M39003_01_case_B-right.png",
    "cut": "Models/views/M39003_01_case_B-cut.png"
   },
   "shown_part": "M39003/01 case B",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style CSR13 capacitor, one per case size A to D at each of the two lead lengths: a round case of diameter D with square ends, a weld boss .094 long on the negative end and a seal boss on the positive end that ends at J, and a lead of diameter M on the axis out of each end, 1.500 long for figure 1 and 1.000 long for tape and reel (note 4).",
   "not_modeled": [
    "Every one of the 3,208 dash numbers of table I: they share the outline of their case size, so one solid stands for each case size at each lead length (1,528 A, 752 B, 584 C, 344 D).",
    "The inside of the capacitor (the sintered tantalum slug, the solid electrolyte, the hermetic seal and the case wall): each solid is the outside shape as one body.",
    "The case insulation as a separate sleeve and its overhang of .015 min beyond each end of the case, or the lap over the ends of a shrink-fitted sleeve (note 3).",
    "The rounded corners drawn at the negative end of the case, the concave flare of the weld and the taper from the positive-end seal to the lead, all drawn without dimensions.",
    "The lead types N-32, N-52, W-32 and W-52 of MIL-STD-1276, the + polarity mark, marking, the surge current and solder letter of the PIN, and the electrical ratings and tests, none of which the outline shows."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "35 pages, 0 scanned. SHA-256 8920c2f9a252.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "14,777 of 16,468 items agreed. All 541 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "7,931 checks on size series and limits. 272 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "44 pages of searchable text, 9 tables (15,335 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "8 solids in STEP AP242. 88 of 88 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision L Notice 1 - Validation, 29 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table II, column 'Substitutable for dash number or part number in: / MIL-C-26655/2D / CS12': 1073 then 175. Page 18 prints 1073 in the CS12 column for dash 6108 (CS13 0174) and 0175 for 6109, as the source text layer also carries; the series 0171, 0172, 1073, 0174, 0175 points to 0173, so the printed value looks wrong for its series.",
    "Model. Figure 1 gives the 1.500 \u00b1.250 lead length on the positive lead only and no length or datum for the negative lead.",
    "Model. Note 3 has the case insulation extend .015 min beyond each end, but figure 1 does not say whether D, L and J are taken over that insulation or over the metal case."
   ]
  },
  {
   "id": "MIL-PRF-55182/3T w/Amendment 1",
   "slug": "mil-prf-55182-3t-w-amendment-1",
   "title": "Resistor, fixed, film, nonestablished reliability, established reliability, and space level, style RN*60 1/",
   "class": "Ohio",
   "folder": "Ohio/MIL-PRF-55182_3T w_Amendment 1 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 2,
   "dimensions": 20,
   "dimensions_met": 20,
   "kind": "Performance specification sheet",
   "dated": "15 August 2024",
   "status": "Active, 15 August 2024",
   "newest": "Revision T Amendment 1 (amendment incorporated), 15 August 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5905-01-467-4140, resistor, fixed, film, MIL-PRF-55182/3 (Ohio)"
   ],
   "files": {
    "package": "MIL-PRF-55182_3T w_Amendment 1 package.pdf",
    "scan": "MIL-PRF-55182_3T w_Amendment 1 legacy scan.pdf",
    "clean": "MIL-PRF-55182_3T w_Amendment 1 clean copy.pdf",
    "record": "MIL-PRF-55182_3T w_Amendment 1 validation record.pdf",
    "sheet": "MIL-PRF-55182_3T w_Amendment 1 3D model.pdf",
    "parts": "MIL-PRF-55182_3T w_Amendment 1 parts list.pdf",
    "inspection": "MIL-PRF-55182_3T w_Amendment 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/RN_60_note_5-freecad.png",
    "pair": "Models/views/RN_60_note_5-pair.png",
    "record": "Models/views/RN_60_note_5-record.png",
    "front": "Models/views/RN_60_note_5-front.png",
    "top": "Models/views/RN_60_note_5-top.png",
    "right": "Models/views/RN_60_note_5-right.png",
    "cut": "Models/views/RN_60_note_5-cut.png"
   },
   "shown_part": "RN*60 note 5",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style RN*60 resistor at its two lead lengths: a round body .125 in diameter and .3485 long with square ends, and a .025 diameter lead on its axis out of each end, 1.500 long for figure 1 and 1.3125 long for new design and tape and reel packaging (note 5).",
   "not_modeled": [
    "The inside of the resistor (the resistive film, its substrate, the end caps and the protective coating): each solid is the outside shape as one body.",
    "The body's own outline inside its envelope, which figure 1 leaves optional, and the coating meniscus that runs onto each lead up to the clean-lead point of note 3.",
    "Lead material and finish (the third letter of the style), marking, and the electrical ratings and tests, none of which changes the outline.",
    "Every coded resistance value, characteristic, tolerance and product level of the PIN: they share one outline, so each lead length has one solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 4617550c6fee.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,482 of 1,536 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "4 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (40 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 20 of 20 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision T Amendment 1 (amendment incorporated), 15 August 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Note 5 prints the plus tolerance on the new-design lead length as +0.625 inch and +15.80 mm, but 0.625 inch is 15.875 mm; the solid follows the inch value, which notes 1 and 2 make the governing unit."
   ]
  },
  {
   "id": "MIL-PRF-55182/6R w/AMENDMENT 2",
   "slug": "mil-prf-55182-6r-w-amendment-2",
   "title": "Resistor, fixed, film, nonestablished reliability, established reliability, and space level, style RN*70 1/",
   "class": "Ohio",
   "folder": "Ohio/MIL-PRF-55182_6R w_AMENDMENT 2 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 2,
   "dimensions": 20,
   "dimensions_met": 20,
   "kind": "Performance specification sheet",
   "dated": "27 March 2026",
   "status": "Active, 27 March 2026",
   "newest": "Revision R Amendment 2 (all previous amendments incorporated), 27 March 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5905-01-571-9568, resistor, fixed, film, MIL-PRF-55182/6 (Ohio)"
   ],
   "files": {
    "package": "MIL-PRF-55182_6R w_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-55182_6R w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-55182_6R w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-55182_6R w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-55182_6R w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-55182_6R w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-55182_6R w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/RN_70_note_5-freecad.png",
    "pair": "Models/views/RN_70_note_5-pair.png",
    "record": "Models/views/RN_70_note_5-record.png",
    "front": "Models/views/RN_70_note_5-front.png",
    "top": "Models/views/RN_70_note_5-top.png",
    "right": "Models/views/RN_70_note_5-right.png",
    "cut": "Models/views/RN_70_note_5-cut.png"
   },
   "shown_part": "RN*70 note 5",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style RN*70 resistor at its two lead lengths: a round body .244 in diameter and .6875 long with square ends, and a .032 diameter lead on its axis out of each end, 1.500 long for figure 1 and 1.3125 long for new design and tape and reel packaging (note 5).",
   "not_modeled": [
    "The inside of the resistor (the resistive film, its substrate, the end caps and the protective coating): each solid is the outside shape as one body.",
    "The body's own outline inside its envelope, which figure 1 leaves optional, and the coating meniscus that runs onto each lead up to the clean-lead point of note 3.",
    "The optional transparent heat shrinkable sleeving that note 7 allows on RNR70 and RNN70 resistors (characteristics C and E), which the document does not dimension.",
    "Lead material and finish (the third letter of the style), marking, and the electrical ratings and tests, none of which changes the outline.",
    "Every coded resistance value, characteristic, tolerance and product level of the PIN: they share one outline, so each lead length has one solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 f038ab34b7bf.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,505 of 1,562 items agreed. All 19 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "16 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (50 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 20 of 20 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision R Amendment 2 (all previous amendments incorporated), 27 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Note 5 prints the plus tolerance on the new-design lead length as +0.625 inch and +15.80 mm, but 0.625 inch is 15.875 mm; the solid follows the inch value, which notes 1 and 2 make the governing unit."
   ]
  },
  {
   "id": "MIL-PRF-83536J",
   "slug": "mil-prf-83536j",
   "title": "Relays, electromagnetic, established reliability, 25 amperes and below, general specification for",
   "class": "Ohio",
   "folder": "Ohio/MIL-PRF-83536J Relays, electromagnetic",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 49,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification sheet",
   "dated": "25 March 2026",
   "status": "Active, 25 March 2026",
   "newest": "Revision J, 25 March 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5945-01-531-6836, relay, electromagnetic, MIL-PRF-83536 (Ohio)"
   ],
   "files": {
    "package": "MIL-PRF-83536J package.pdf",
    "scan": "MIL-PRF-83536J legacy scan.pdf",
    "clean": "MIL-PRF-83536J clean copy.pdf",
    "record": "MIL-PRF-83536J validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "49 pages, 0 scanned. SHA-256 c1e360f239e6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "20,522 of 20,833 items agreed. 41 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "204 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "51 pages of searchable text, 16 tables (855 cells), 11 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-83536 is a general performance specification for established-reliability electromagnetic relays of 25 amperes and below that sets materials, electrical and environmental requirements, test methods and quality conformance inspection, and sends each relay's dimensions to its specification sheet (M83536/N), so it fixes no part shape with dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J, 25 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table IV, row 4 (R), column C = 0: read as 9l.6, could be 91.6."
   ]
  },
  {
   "id": "MIL-PRF-83536/21E",
   "slug": "mil-prf-83536-21e",
   "title": "Relays, electromagnetic, established reliability, 3PDT, low level to 10 amperes, permanent magnetic drive, hermetically sealed, all welded, DC coil",
   "class": "Ohio",
   "folder": "Ohio/MIL-PRF-83536_21E Relays, electromagnetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 32,
   "dimensions": 628,
   "dimensions_met": 628,
   "kind": "Performance specification sheet",
   "dated": "22 June 2023",
   "status": "Active, 22 June 2023",
   "newest": "Revision E, 22 June 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5945-01-531-6836, relay, electromagnetic, M83536/21-022M (Ohio)"
   ],
   "files": {
    "package": "MIL-PRF-83536_21E package.pdf",
    "scan": "MIL-PRF-83536_21E legacy scan.pdf",
    "clean": "MIL-PRF-83536_21E clean copy.pdf",
    "record": "MIL-PRF-83536_21E validation record.pdf",
    "sheet": "MIL-PRF-83536_21E 3D model.pdf",
    "parts": "MIL-PRF-83536_21E parts list.pdf",
    "inspection": "MIL-PRF-83536_21E inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M83536_21-006-freecad.png",
    "pair": "Models/views/M83536_21-006-pair.png",
    "record": "Models/views/M83536_21-006-record.png",
    "front": "Models/views/M83536_21-006-front.png",
    "top": "Models/views/M83536_21-006-top.png",
    "right": "Models/views/M83536_21-006-right.png",
    "cut": "Models/views/M83536_21-006-cut.png"
   },
   "shown_part": "M83536/21-006",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of all 32 dash numbers M83536/21-001 to -032 of Table III: the .810 square by .640 high relay can with its nine .062 terminals and the X1 and X2 coil terminals in the Table III style (solder pin, solder hook, or socket pin with gasket) and its mount (none, or the RVFM or HFM slotted flanges).",
   "not_modeled": [
    "The failure rate suffix letters L, M, P and R that complete each part number; they do not change the geometry, so each dash number has one solid, and dash numbers that differ only in coil voltage share one shape.",
    "The panel mounting hole layouts (three .140 \u00b1.003 holes and the .850 square cutout with .031 radius corners for RVFM, four .140 \u00b1.003 holes on 1.070 by .405 for HFM); the flange slot spacing is checked against 1.070, .500 and .405.",
    "The two optional dummy beads located .100 from the right column, the contrasting bead on X1, and the glass seal beads around each terminal.",
    "Corner radii of the can and the flange tab corners, which are drawn round but not dimensioned; all are left sharp.",
    "The vertical leg of the bent RVFM and HFM flanges, whose height is not dimensioned.",
    "Rounded terminal tips, markings, circuit diagram, plating and finishes, gasket hardness and material, and the internal coil, magnet and contacts.",
    "The 0.062 pound weight, which the solids cannot show without material densities."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, 3 scanned. SHA-256 1e658cb6cef8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,613 of 1,622 items agreed. All 8 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "254 checks on size series and limits. 3 breaks checked against the scan: all are as printed. A later review settled 1 printed value from the document's own conversions.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 8 tables (357 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "32 solids in STEP AP242. 628 of 628 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E, 22 June 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 gives no inside diameter or turn direction for the solder hooks; the model uses an inside diameter equal to the wire diameter, turned toward +X.",
    "Model. HFM: Figure 1 does not locate the flange or its .405 slot pair along the .640 case height; the model centers them on the height."
   ]
  },
  {
   "id": "MIL-PRF-94/5K",
   "slug": "mil-prf-94-5k",
   "title": "Resistor, variable, composition, style RV4",
   "class": "Ohio",
   "folder": "Ohio/MIL-PRF-94_5K Resistor, variable",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 20,
   "dimensions": 301,
   "dimensions_met": 301,
   "kind": "Performance specification sheet",
   "dated": "26 September 2022",
   "status": "Active, 26 September 2022",
   "newest": "Revision K, 26 September 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5905-01-571-9568, resistor, fixed, film, MIL-PRF-94/5 (Ohio)"
   ],
   "files": {
    "package": "MIL-PRF-94_5K package.pdf",
    "scan": "MIL-PRF-94_5K legacy scan.pdf",
    "clean": "MIL-PRF-94_5K clean copy.pdf",
    "record": "MIL-PRF-94_5K validation record.pdf",
    "sheet": "MIL-PRF-94_5K 3D model.pdf",
    "parts": "MIL-PRF-94_5K parts list.pdf",
    "inspection": "MIL-PRF-94_5K inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/MIL-PRF-94_5_sealed_standard_slotted_G-freecad.png",
    "pair": "Models/views/MIL-PRF-94_5_sealed_standard_slotted_G-pair.png",
    "record": "Models/views/MIL-PRF-94_5_sealed_standard_slotted_G-record.png",
    "front": "Models/views/MIL-PRF-94_5_sealed_standard_slotted_G-front.png",
    "top": "Models/views/MIL-PRF-94_5_sealed_standard_slotted_G-top.png",
    "right": "Models/views/MIL-PRF-94_5_sealed_standard_slotted_G-right.png",
    "cut": "Models/views/MIL-PRF-94_5_sealed_standard_slotted_G-cut.png"
   },
   "shown_part": "MIL-PRF-94/5 sealed standard slotted G",
   "application": "FreeCAD 1.1.4",
   "modeled": "Outside solids of the style RV4 variable resistor in all 18 combinations that figure 1 and table II define (standard and locking bushing, each with and without the shaft-and-panel seal, flatted and slotted shafts at every table II shaft length), each with its nonturn pin and three terminals, plus the mounting and locking nuts of paragraph 3.5.",
   "not_modeled": [
    "The inside of the resistor (element, wiper, shaft seal) and the panel seal itself, whose thickness and diameter figure 1 does not give: each resistor solid is the outside shape as one body.",
    "The dashed optional rear outline: .828 +.141 -.109, 1.031 +.172 -.125 (panel-sealed) and .781 +.094 -.062, .969 +.141 -.062 (unsealed) from the mounting surface.",
    "The rounded rear corners of the body, the end chamfer of the bushing and the split of the locking bushing (design of bushing optional), which figure 1 draws without dimensions.",
    "The internal tooth lockwasher (3.5.1, suitable size) and the retainer rings (3.5.2, .047 max thick), which have no other dimensions.",
    "The coded dash number letters other than bushing and shaft length, resistance values and tapers (table I), the switch option, torque, rotation and the electrical ratings, which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 34ddd0880a54.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,479 of 1,480 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "217 checks on size series and limits. 11 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 3 tables (230 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "20 solids in STEP AP242. 301 of 301 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K, 26 September 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 on page 2 does not label what .039 \u00b1.023 measures and the page 3 metric table lists neither .039 nor .023; the models take it as the nonturn device projection on the panel-sealed types, not the panel seal thickness, and an engineer should confirm.",
    "Model. Table II prints the shaft length tolerance as \u00b10.313 inch, which at its low limit would make shaft B (.500 nominal) .187 long, shorter than the .375 standard bushing it runs through, so an engineer should confirm the tolerance.",
    "Model. Figure 1 does not give the length of the flat on the flatted shaft, so the models run it the whole exposed shaft length."
   ]
  },
  {
   "id": "MIL-R-17882E",
   "slug": "mil-r-17882e",
   "title": "Repair kits, metallic pipe and general purpose, damage control",
   "class": "Ohio",
   "folder": "Ohio/MIL-R-17882E Repair kits, metallic pipe and general purpose",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 27,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "6 January 1993",
   "status": "Active, 6 January 1993",
   "newest": "Revision E, 6 January 1993",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Ohio": 2
   },
   "stock_examples": [
    "4730-00-542-3359, repair kit, pipe, emergency damage, MIL-R-17882 (Ohio)",
    "4730-00-542-3362, repair kit, pipe, emergency damage, MIL-R-17882 (Ohio)"
   ],
   "files": {
    "package": "MIL-R-17882E package.pdf",
    "scan": "MIL-R-17882E legacy scan.pdf",
    "clean": "MIL-R-17882E clean copy.pdf",
    "record": "MIL-R-17882E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "27 pages, all scanned. SHA-256 1467aad2d448.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "8,351 of 8,364 items agreed. 12 differences went to a third reader. 3 readings remain open.",
     "result": "3 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "39 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "20 pages of searchable text, 6 tables (153 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-R-17882E is the material, test and packaging specification for metallic pipe and general purpose damage control repair kits 1, 2 and 3 and has no part drawing: it lists each kit's contents by quantity and cut size (Table I), sets viscosity, specific gravity, flash point, color, stability, reaction time, patch temperature, paste consistency and hydrostatic adhesion requirements for the liquid and paste resins and hardeners (3.3.1 to 3.4.3.3), gives the glass cloth, void cover, PVC film, paint paddle, chalk line, abrasive cloth, scissors, gloves and visitor specs only by material, reference specification and overall size, such as a hardwood paint paddle 5-3/4 by 11/16 inches with no thickness (3.3.4 to 3.3.12), and sets sampling, inspection, test methods and packaging; Figure 1 dimensions the one-size brass penetrometer cone with a stainless or hardened steel tip for the paste consistency test (4.7.3.1.2), and 4.7.2.4.1, 4.7.2.5.3 and 4.7.3.4.1 describe the steel and copper-nickel adhesion test plates and the 2-1/2 inch test pipe sections in words, all test equipment rather than parts the kits supply.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E, 6 January 1993.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 1, callout BEFORE ROUNDING 2.56 6.51 cm.: read as 2.56, could be 2.58.",
    "Open reading. Figure 1, callout TRUNCATE TIP TO 0.015\" \u00b10.003 DIAM., first line: read as 0.015\", could be 0.015\u00b0.",
    "Open reading. Page 25, text: read as SH 9435, could be SH 9438."
   ]
  },
  {
   "id": "MIL-T-16366F",
   "slug": "mil-t-16366f",
   "title": "Terminals, electrical lug and conductor splices, crimp-style",
   "class": "Ohio",
   "folder": "Ohio/MIL-T-16366F Terminals, electrical lug and conductor splices",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 28,
   "solids": 148,
   "dimensions": 1584,
   "dimensions_met": 1581,
   "kind": "Military specification",
   "dated": "8 February 1980",
   "status": "Active, 23 February 2021",
   "newest": "Revision F Notice 4 - Validation, 23 February 2021",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Ohio": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5940-01-469-1635, terminal, lug, MIL-T-16366 (Ohio)",
    "5940-01-460-9531, terminal, lug, MIL-T-16366 (Seawolf)"
   ],
   "files": {
    "package": "MIL-T-16366F package.pdf",
    "scan": "MIL-T-16366F legacy scan.pdf",
    "clean": "MIL-T-16366F clean copy.pdf",
    "record": "MIL-T-16366F validation record.pdf",
    "sheet": "MIL-T-16366F 3D model.pdf",
    "parts": "MIL-T-16366F parts list.pdf",
    "inspection": "MIL-T-16366F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 2, page 10",
   "pictures": {
    "iso": "Models/views/MIL-T-16366_CCPC_150_200_-_150_200-freecad.png",
    "pair": "Models/views/MIL-T-16366_CCPC_150_200_-_150_200-pair.png",
    "record": "Models/views/MIL-T-16366_CCPC_150_200_-_150_200-record.png",
    "front": "Models/views/MIL-T-16366_CCPC_150_200_-_150_200-front.png",
    "top": "Models/views/MIL-T-16366_CCPC_150_200_-_150_200-top.png",
    "right": "Models/views/MIL-T-16366_CCPC_150_200_-_150_200-right.png",
    "cut": "Models/views/MIL-T-16366_CCPC_150_200_-_150_200-cut.png"
   },
   "shown_part": "MIL-T-16366 CCPC 150/200 - 150/200",
   "application": "FreeCAD 1.1.4",
   "modeled": "Type CCBC butt-crimp splices of Table I as sleeves with a blind barrel from each end (23 sizes), type CCPC parallel-crimp splices of Table II as envelope blocks of their maximum height, width and length (14 sizes), and type WTG lug terminals, one solid for each of the 3 barrel sizes of Table V with each of the 37 tongue shapes of Tables VI to X (111), each with its shroud, closed-end barrel, neck and tongue with its bolt holes, and the lips, boss or end notch its tongue shape calls for.",
   "not_modeled": [
    "Types CLC and CLCG lug terminals (Tables III and IV, Figures 3 and 4): the sheet gives only their maximum width and length, bolt hole sizes and spacing and the cable sizes, not the barrel, tongue thickness or hole positions, so no solid is built for them.",
    "The inside of the CCPC splices: the sheet gives only the maximum outside dimensions, not the passages for the run and tap cables or the crimp form.",
    "Ratings, voltage drops, pull-out loads, minimum CCBC and maximum CCPC weights, water sealing and the other performance requirements of section 3.4.",
    "Material, brazed seams, tin or silver plating and its thickness, and the identification marking.",
    "Corner radii and the curved shoulders the figures draw between barrel, neck and tongue, which are not dimensioned.",
    "The mounting of tongues L-15, L-16 and L-17 together on one stud with barrel axes 9/64 to 15/64 inch apart (Table VI note 2/): each terminal is modeled alone.",
    "The crimped state: every solid is the part as furnished, before crimping."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "28 pages, all scanned. SHA-256 360de2bf7678.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "7,766 of 8,667 items agreed. 713 differences went to a third reader. A second pass settled 37 from the sheet's layout (a point the scan did not print). 6 readings remain open. 4 values that the scan prints in a doubtful form are listed for the engineer.",
     "result": "6 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "1,156 checks on size series and limits. 42 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "19 pages of searchable text, 16 tables (2,543 cells), 9 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "148 solids in STEP AP242. 1,581 of 1,584 stated dimensions measure within limits; 3 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 4 - Validation, 23 February 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, weight (min): no value in the column prints a decimal point; the scan shows 0 03, 04 and 08 for splices 1 - 2, 2-1/2 - 4 and 6 - 9, then 0 2, 2, 4, 5, 6, 8, 9, 1 2, 1 5, 1 7, 2 4, 2 8, 4 0, 4 5, 5 0, 8 0, 13 0, 17 0, 24 0 and 40 0 for splices 14 to 1,600, with a blank where a point would fall.",
    "Printed value to confirm. Table II, maximum weight: every cell on pages 7 to 9 prints a digit, a blank and two digits (1 53, 1 32, 3 52, 3 68, 3 36, 4 00, 5 28, 4 80), the blank standing where a decimal point belongs.",
    "Printed value to confirm. Table II, rating: the third 125(61) run row of group 100/125 - 50/75 prints 346, while every other 125(61) row of the table, and Table III for 125(61), gives 345.",
    "Printed value to confirm. Table II, pull-out: the second 150(61) run row of group 100/200 - 50/75 prints 760, while every other 150(61) row of the table, and Table III for 150(61), gives 750.",
    "Open reading. Table III, column Voltage drop / Lug terminal to bus or stud, units row: read as mV, could be nV.",
    "Open reading. Table V, row 4, column 4: read as 040, could be 046.",
    "Open reading. Page 21, End of paragraph: read as test points:, could be test points.",
    "Open reading. Page 22, End of paragraph: read as shall apply:, could be shall apply.",
    "Open reading. Page 22, End of paragraph: read as MIL-P-116 methods:, could be MIL-P-116 methods.",
    "Open reading. Page 24, End of paragraph: read as the following:, could be the following.",
    "Model. Table VII prints F, the opening of the notch at the end of tongue L-46, as 7.32 inch, wider than the 5/16 inch tongue; the models cut it 7/32 wide, and an engineer must confirm that value.",
    "Model. The sheet gives no thickness for the WTG tongue, its lips or the shroud wall and no boss diameter; the models use the Table V barrel wall (.035 or .041 inch) for all of them and a boss of the hole plus twice that, which leaves the 3/64 inch boss of L-47 and L-60 only .006 inch above the tongue on size 6 - 9, so an engineer must set these dimensions.",
    "Model. Table I gives no bore for the CCBC barrels; the models bore each to the largest diameter over copper it must take, with no clearance, so an engineer must set the bore.",
    "Model. The models depend on readings still listed as open: the inch values that Tables I, II, V, VI and IX print without a decimal point (for example 0 150 and 212 in Table I, 1 005 and 880 in Table II, 375 and 082 in Table V, 178 in Table VI and 194 in Table IX), which the models read as thousandths of an inch."
   ]
  },
  {
   "id": "MS 20066",
   "slug": "ms-20066",
   "title": "Key, machine-square in cross section, both ends square",
   "class": "Ohio",
   "folder": "Ohio/MS 20066 Key, machine-square in cross section",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 14,
   "dimensions": 98,
   "dimensions_met": 98,
   "kind": "Military standard",
   "dated": "13 Nov 1964",
   "status": "Canceled, 21 June 1999",
   "newest": "Revision A Notice 2 - Cancellation, 21 June 1999",
   "superseding": "NASM20066",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 2,
   "by_class": {
    "Ohio": 1,
    "Seawolf": 1
   },
   "stock_examples": [
    "5315-01-514-8089, key, machine, MS20066-556 (Ohio)",
    "5315-01-494-3454, key, machine, MS20066-793 (Seawolf)"
   ],
   "files": {
    "package": "MS 20066 package.pdf",
    "scan": "MS 20066 legacy scan.pdf",
    "clean": "MS 20066 clean copy.pdf",
    "record": "MS 20066 validation record.pdf",
    "sheet": "MS 20066 3D model.pdf",
    "parts": "MS 20066 parts list.pdf",
    "inspection": "MS 20066 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS20066-431-freecad.png",
    "pair": "Models/views/MS20066-431-pair.png",
    "record": "Models/views/MS20066-431-record.png",
    "front": "Models/views/MS20066-431-front.png",
    "top": "Models/views/MS20066-431-top.png",
    "right": "Models/views/MS20066-431-right.png",
    "cut": "Models/views/MS20066-431-cut.png"
   },
   "shown_part": "MS20066-431",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid square key per nominal size, 1/16 X 1/16 to 1 X 1 (14 sizes), each at the middle listed length A and named by its Grade A dash number, with C and D at the middle of their limits and all edges and corners rounded.",
   "not_modeled": [
    "The document defines 885 dash numbers (each size at every listed length A in Grades A, B and C); only one representative length per size is modeled because the count exceeds 400, and the other lengths differ only in A.",
    "Grades A, B and C differ only in material (corrosion-resisting, alloy and carbon steel), hardening and passivation per QQ-P-35; the solids carry no material, hardness or coating."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, all scanned. SHA-256 baf51a638f42.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,535 of 1,603 items agreed. All 29 differences were settled against the page image. A second pass settled 2 from a closer look at the page, 3 from a second printing in the document.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1,818 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 7 tables (1,204 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "14 solids in STEP AP242. 98 of 98 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 2 - Cancellation, 21 June 1999.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Sheet 3 prints dash number 719 twice in the 5/8 X 5/8 Grade C column, at length 2 and at length 2-1/4, and prints no 718; every other row of that column is the Grade B number plus 20, which would make length 2 dash 718. The engineer must decide which part number the 5/8 X 5/8 Grade C key at length 2 carries."
   ]
  },
  {
   "id": "MS 35869",
   "slug": "ms-35869",
   "title": "Adapter, straight, male, refrigeration pipe to flared tube",
   "class": "Ohio",
   "folder": "Ohio/MS 35869 Adapter, straight",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 12,
   "dimensions": 84,
   "dimensions_met": 84,
   "kind": "Military standard",
   "dated": "21 MAR 75",
   "status": "Canceled, 25 April 1999",
   "newest": "Revision C Notice 2 - Cancellation, 25 April 1999",
   "superseding": "SAE-J513",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-266-0533, adapter, straight, pipe to tube, MS35869-2-2 (Ohio)"
   ],
   "files": {
    "package": "MS 35869 package.pdf",
    "scan": "MS 35869 legacy scan.pdf",
    "clean": "MS 35869 clean copy.pdf",
    "record": "MS 35869 validation record.pdf",
    "sheet": "MS 35869 3D model.pdf",
    "parts": "MS 35869 parts list.pdf",
    "inspection": "MS 35869 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS35869-43-freecad.png",
    "pair": "Models/views/MS35869-43-pair.png",
    "record": "Models/views/MS35869-43-record.png",
    "front": "Models/views/MS35869-43-front.png",
    "top": "Models/views/MS35869-43-top.png",
    "right": "Models/views/MS35869-43-right.png",
    "cut": "Models/views/MS35869-43-cut.png"
   },
   "shown_part": "MS35869-43",
   "application": "FreeCAD 1.1.4",
   "modeled": "12 straight male adapters, one per MS35869 dash number: a 45 degree flared tube end, hex and pipe-thread end at the overall length L of the dash-number table, with a through bore.",
   "not_modeled": [
    "The tube end, flare seat and hex dimensions of MS 35873 and the pipe end dimensions of MS 35868, which this sheet refers out and which are not in the library; the solids use stand-in values for them.",
    "Thread forms, pipe-thread taper, chamfers, thread reliefs, finish and material (copper alloy 360 or 377 of QQ-B-626)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, all scanned. SHA-256 384b6a95f335.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "171 of 308 items agreed. All 43 differences were settled against the page image. A second pass settled 1 from the sheet's layout (a point the scan did not print). 5 marks outside the technical content are kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "22 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 1 table (48 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "12 solids in STEP AP242. 84 of 84 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 2 - Cancellation, 25 April 1999.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. In the dash number table on page 1, MS 35869-64 (3/4 pipe, 1/2 tube) prints length L 2.158, longer than the -65 (5/8 tube) at 2.062 and close to the -66 (3/4 tube) at 2.188. In every other pipe size the length rises with tube size, so 2.158 looks wrong for its series and should be confirmed.",
    "Model. The sheet takes the tube end, flare seat and hex from MS 35873 and the pipe end from MS 35868, and neither sheet is in the library, so the hex across flats, tube-end length, flare seat and pipe-end length are stand-ins. An engineer must supply MS 35873 and MS 35868 and set those dimensions from them."
   ]
  },
  {
   "id": "MS14200B",
   "slug": "ms14200b",
   "title": "Nut, floating, self locking, attached retention element (A.R.E.), 450\u00b0F, steel, 125 ksi Ftu, replaceable nut element",
   "class": "Ohio",
   "folder": "Ohio/MS14200B Nut, floating",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 74,
   "dimensions": 888,
   "dimensions_met": 888,
   "kind": "Military specification sheet",
   "dated": "17 APR 95",
   "status": "Canceled, 14 December 1999",
   "newest": "Revision B Notice 1 - Cancellation, 14 December 1999",
   "superseding": "NASM14200",
   "preparing_activity": "DLA Troop Support - Industrial Hardware Items of Supply Stdz. (S/S by CC/CQ",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5310-01-213-4181, nut, self-locking, spline, MS14200-3-2 (Ohio)"
   ],
   "files": {
    "package": "MS14200B package.pdf",
    "scan": "MS14200B legacy scan.pdf",
    "clean": "MS14200B clean copy.pdf",
    "record": "MS14200B validation record.pdf",
    "sheet": "MS14200B 3D model.pdf",
    "parts": "MS14200B parts list.pdf",
    "inspection": "MS14200B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 2",
   "pictures": {
    "iso": "Models/views/MS14200-08-16-freecad.png",
    "pair": "Models/views/MS14200-08-16-pair.png",
    "record": "Models/views/MS14200-08-16-record.png",
    "front": "Models/views/MS14200-08-16-front.png",
    "top": "Models/views/MS14200-08-16-top.png",
    "right": "Models/views/MS14200-08-16-right.png",
    "cut": "Models/views/MS14200-08-16-cut.png"
   },
   "shown_part": "MS14200-08-16",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MS14200 floating nut assembly (cage, nut element and sleeve fused as one body) for every size dash number 04, 06, 08, 3 and 4 at every grip dash number in Table III, 74 parts.",
   "not_modeled": [
    "MS14200-4-2 is not built: note (e) bars size 4 from grips under .060 and Table II gives no -2 grip countersink for size 4.",
    "The panel installation holes (\u00d8U, R1, R2, T1, T2 and the 100\u00b0 countersink and counterbore of Tables II and III) are panel preparation, not part geometry, and are not modeled.",
    "K is a reference dimension (thread relief, sleeve flange and cage thickness) and is not checked.",
    "The nut element's locking shape, internal thread, the cage's curved ends and ear forms, the identification marks, flaring, the axial strength, weights and material, plating and lubricant requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 7db2acaf519e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "713 of 786 items agreed. All 24 differences were settled against the page image. A second pass settled 4 from another revision.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "113 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 3 tables (175 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "74 solids in STEP AP242. 888 of 888 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 1 - Cancellation, 14 December 1999.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS17990E",
   "slug": "ms17990e",
   "title": "Pin, quick release, positive locking, double acting, ring handle",
   "class": "Ohio",
   "folder": "Ohio/MS17990E Pin, quick release",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 11,
   "dimensions": 121,
   "dimensions_met": 120,
   "kind": "Military specification sheet",
   "dated": "1 JUN 94",
   "status": "Canceled, 30 November 1998",
   "newest": "Revision E Notice 1 - Cancellation, 30 November 1998",
   "superseding": "NASM17990",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5315-00-949-1894, pin, quick release, MS17990C610 (Ohio)"
   ],
   "files": {
    "package": "MS17990E package.pdf",
    "scan": "MS17990E legacy scan.pdf",
    "clean": "MS17990E clean copy.pdf",
    "record": "MS17990E validation record.pdf",
    "sheet": "MS17990E 3D model.pdf",
    "parts": "MS17990E parts list.pdf",
    "inspection": "MS17990E inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS17990C810-freecad.png",
    "pair": "Models/views/MS17990C810-pair.png",
    "record": "Models/views/MS17990C810-record.png",
    "front": "Models/views/MS17990C810-front.png",
    "top": "Models/views/MS17990C810-top.png",
    "right": "Models/views/MS17990C810-right.png",
    "cut": "Models/views/MS17990C810-cut.png"
   },
   "shown_part": "MS17990C810",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the ring handle double acting quick release pin, one for each of the 11 nominal diameters (3/16 to 1) at the 1.000 grip: shank with tip chamfer, two locking balls, head with link band seat, release button and ring handle.",
   "not_modeled": [
    "Table II defines 1,028 dash numbers (grips .300 to 9.900 in .100 steps); one representative grip, 1.000, is built for each diameter.",
    "The attaching link band (.050 min) and attaching ring or S link (\u00f8.100 min) are not modeled; only the band's seat in the head is shown.",
    "Internal spindle, spring and locking mechanism, materials, heat treatment, surface treatment, double shear, tensile strength and recommended hole diameters."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 33c1f355f156.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,945 of 1,963 items agreed. All 15 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "455 checks on size series and limits. 4 breaks checked against the scan: all are as printed. 1,286 values are also printed on 4 other sheets of the series: 1,284 match, 2 differ as printed. A later review settled 2 printed values from the column's units and limits, 1 printed value from the other sheets of the series.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 3 tables (1,435 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "11 solids in STEP AP242. 120 of 121 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 1 - Cancellation, 30 November 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, 3/8 row: read as printed, the head diameter E limits are 510 minimum and .630 maximum, so the minimum exceeds the maximum. The missing decimal point in 510 is the cause; the 7/16 row prints .510 with the same .630 maximum.",
    "Differs within the series. Dash number, 3/4 diameter, C961: C1261 here; MS17984 prints C1260, MS17985 prints C1260, MS17987 prints C1260. Grip 6.100. MS17984, MS17985 and MS17987 print C1260 clearly on page 6, repeating their 6.000 row; MS17986 and MS17990 print C1261 clearly (crops page 6-84-r6100.png to page 6-90-r6100.png).",
    "Model. Table I prints the head diameter E minimum of the 3/8 pin as 510 with no decimal point, above its .630 maximum; the 7/16 row, which repeats the other head values of the 3/8 row, prints .510. The solid uses .510; an engineer must confirm it.",
    "Model. Table I prints the K maximum of the 5/8 pin as 575 with no decimal point, against a .510 minimum; the 3/16 to 5/16 and 3/4 to 1 inch rows print K maximum .065 above K minimum, which gives .575. The solid uses .575; an engineer must confirm it.",
    "Model. The figure dimensions the shank point only by two angles, printed as 30\u00b0 over 15\u00b0, and gives no chamfer length or end diameter. The solids use a 30\u00b0 chamfer to a radial depth of 15 percent of A; an engineer must confirm what the two angles limit and set the size of the chamfer."
   ]
  },
  {
   "id": "MS21913",
   "slug": "ms21913",
   "title": "Plug, flareless tube",
   "class": "Ohio",
   "folder": "Ohio/MS21913 Plug, flareless tube",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 2,
   "solids": 12,
   "dimensions": 72,
   "dimensions_met": 72,
   "kind": "Military standard",
   "dated": "26 JUNE 1981",
   "status": "Canceled, 15 May 2000",
   "newest": "Revision E Notice 2 - Cancellation, 15 May 2000",
   "superseding": "SAE-AS21913",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-541-7198, plug, tube fitting, threaded, MS21913-4D (Ohio)"
   ],
   "files": {
    "package": "MS21913 package.pdf",
    "scan": "MS21913 legacy scan.pdf",
    "clean": "MS21913 clean copy.pdf",
    "record": "MS21913 validation record.pdf",
    "sheet": "MS21913 3D model.pdf",
    "parts": "MS21913 parts list.pdf",
    "inspection": "MS21913 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS21913-10-freecad.png",
    "pair": "Models/views/MS21913-10-pair.png",
    "record": "Models/views/MS21913-10-record.png",
    "front": "Models/views/MS21913-10-front.png",
    "top": "Models/views/MS21913-10-top.png",
    "right": "Models/views/MS21913-10-right.png",
    "cut": "Models/views/MS21913-10-cut.png"
   },
   "shown_part": "MS21913-10",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MS21913 flareless tube plug for all 12 dash numbers (-2 to -32): a chamfered hex of width C and a plain cylinder at the thread T major diameter, overall length B with the fitting end A long.",
   "not_modeled": [
    "Material variants (D, W, J, K, S and T codes) share the dash-number geometry and are not built as separate solids.",
    "The drilled blind hole, the internal cone and the thread relief of the fitting end, which MS33514 Style E defines and this sheet does not dimension.",
    "Screw threads, the fitting-end chamfer and edge breaks.",
    "Maximum weights per material are not checked, since the envelope omits the bore."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 a1760319ec76.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "591 of 671 items agreed. 34 differences went to a third reader. A second pass settled 2 from the document's record in ASSIST. 5 readings remain open. 2 marks outside the technical content are kept as transcription notes.",
     "result": "5 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "86 checks on size series and limits. 3 breaks checked against the scan: 2 as printed, 1 doubtful on the page and listed as open.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (120 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "12 solids in STEP AP242. 72 of 72 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 2 - Cancellation, 15 May 2000.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 1, row 1 (-3), column AL ALLOY: read as .008, could be .006 or .003.",
    "Open reading. Page 1, row 1 (-3), column TI ALLOY: read as .009, could be .003.",
    "Open reading. Page 1, row 2 (-4), column STEEL: read as .020, could be .030.",
    "Open reading. Page 1, row 2 (-4), column AL ALLOY: read as .007, could be .009.",
    "Open reading. Page 2, text: read as 27 JUNE 1969, could be 23 JUNE 1969.",
    "Printed value to confirm. In the table on page 1, dimension A is 11/16 for the -12 and -16 sizes and then drops to 5/8 for the larger -20 size, although A never falls from 3/8 at -2 up to 11/16 at -16. Nothing on the sheet explains the drop; confirm the -20 thread length.",
    "Printed value to confirm. In the table on page 1, dimension A is 23/32 for the -24 size and 11/16 for the larger -32 size, so the thread length falls as the tube size rises; both sizes take the flat-bottomed hole of footnote (b), which ties the hole to A. Confirm A for -24 and -32.",
    "Model. The sheet gives neither the bore diameter nor the depth of the drilled hole, so the model leaves the hole out. Footnote (b) makes the hole of the -24 and -32 sizes flat-bottomed in accordance with dimension A, but the figure measures A from the hex face to the end of the thread; the engineer must set the hole size and depth, from MS33514 Style E or by decision."
   ]
  },
  {
   "id": "MS25041H",
   "slug": "ms25041h",
   "title": "Light, indicator, press to test, small",
   "class": "Ohio",
   "folder": "Ohio/MS25041H Light, indicator",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 12,
   "dimensions": 108,
   "dimensions_met": 108,
   "kind": "Detail specification sheet",
   "dated": "11 January 2022",
   "status": "Active, 11 January 2022",
   "newest": "Revision H, 11 January 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "6210-00-819-3930, light, indicator, MS25041-11 (Ohio)"
   ],
   "files": {
    "package": "MS25041H package.pdf",
    "scan": "MS25041H legacy scan.pdf",
    "clean": "MS25041H clean copy.pdf",
    "record": "MS25041H validation record.pdf",
    "sheet": "MS25041H 3D model.pdf",
    "parts": "MS25041H parts list.pdf",
    "inspection": "MS25041H inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS25041-7-freecad.png",
    "pair": "Models/views/MS25041-7-pair.png",
    "record": "Models/views/MS25041-7-record.png",
    "front": "Models/views/MS25041-7-front.png",
    "top": "Models/views/MS25041-7-top.png",
    "right": "Models/views/MS25041-7-right.png",
    "cut": "Models/views/MS25041-7-cut.png"
   },
   "shown_part": "MS25041-7",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the press-to-test indicator light MS25041-1 to -8 and -10 to -13 (TABLE I), all of one shape: the lens and cap to .562 from the lens face at .650 diameter, the 15/32-32 bushing with .500 of thread, the .510 terminal housing and three flat terminals ending 1.750 from the lens face.",
   "not_modeled": [
    "The two MS25082-8 or B8 nuts and the NASM35333-126 lockwasher shown on the bushing, which are dimensioned in their own standards.",
    "The lamp of TABLE II (M6363/8-5 or -2) and every internal part: the lens holder, the press-to-test switch, the dimmer mechanism and the lamp socket.",
    "The thread form, the knurl on the cap, the rounded edges of the cap, the solder hole in terminal 1, and the PRESS TO TEST, DIM, part number and terminal number markings.",
    "Lens color and the NVG Green transmission requirements of TABLE III, and the dimmer feature, which do not change the envelope."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 2 scanned. SHA-256 0b79d9125a92.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "441 of 443 items agreed. All 3 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "32 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (50 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "12 solids in STEP AP242. 108 of 108 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H, 11 January 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 does not dimension the terminals (width, thickness, spacing, solder hole) or where the terminal housing sits along the body, so the solids place them in proportion to the figure and an engineer must take real values from a qualified source's drawing before using the model for wiring or panel-depth clearance."
   ]
  },
  {
   "id": "MS25080F",
   "slug": "ms25080f",
   "title": "Terminal, stud",
   "class": "Ohio",
   "folder": "Ohio/MS25080F Terminal, stud",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 9,
   "dimensions": 90,
   "dimensions_met": 90,
   "kind": "Military specification sheet",
   "dated": "5 JAN 90",
   "status": "Canceled, 17 October 1997",
   "newest": "Revision F Notice 1 - Cancellation, 17 October 1997",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5940-01-532-0515, terminal, stud, MS25080-2BD (Ohio)"
   ],
   "files": {
    "package": "MS25080F package.pdf",
    "scan": "MS25080F legacy scan.pdf",
    "clean": "MS25080F clean copy.pdf",
    "record": "MS25080F validation record.pdf",
    "sheet": "MS25080F 3D model.pdf",
    "parts": "MS25080F parts list.pdf",
    "inspection": "MS25080F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 2",
   "pictures": {
    "iso": "Models/views/MS25080-6-freecad.png",
    "pair": "Models/views/MS25080-6-pair.png",
    "record": "Models/views/MS25080-6-record.png",
    "front": "Models/views/MS25080-6-front.png",
    "top": "Models/views/MS25080-6-top.png",
    "right": "Models/views/MS25080-6-right.png",
    "cut": "Models/views/MS25080-6-cut.png"
   },
   "shown_part": "MS25080-6",
   "application": "FreeCAD 1.1.4",
   "modeled": "Hex-collar stud terminals MS25080-1 to -9: a round stud at the A thread major diameter, length E, with a .03 x 45 deg chamfer at both ends and a hexagon collar F across flats between C and D from the B-thread end.",
   "not_modeled": [
    "Thread form; both threaded ends are plain cylinders at the major diameter.",
    "Thread length B and the maximum unthreaded length G beside the hex, since a plain cylinder carries no thread boundary.",
    "Alloy (TABLE II) and finish (TABLE III) designators, which do not change the shape, and the part number marking on the hex."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 ced99113efee.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "399 of 450 items agreed. All 13 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "115 checks on size series and limits. 8 breaks checked against the scan: all are as printed. A later review settled 1 printed value from the column's units and limits.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 4 tables (158 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 90 of 90 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision F Notice 1 - Cancellation, 17 October 1997.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. MS25080-9 prints its A thread as .138-24 UNF-2A, a thread that does not exist at .138 diameter, while its B 1.031, C 1.156, hex .875 and G .09 match -5, which prints .375-24 UNF-2A. The engineer must decide which thread -9 carries; the model builds .138 as printed.",
    "Model. MS25080-9 prints D as 1.344, while -5, which prints the same B, C and hex, prints D as 1.334, and the metric list on the same page gives 1.334 = 33.88 mm with no entry for 1.344. The engineer must decide whether -9 D is 1.344 or 1.334; the model uses 1.344 as printed.",
    "Model. Note 1 prints the general tolerance as +.015 with no minus side. The engineer must decide whether it is plus or minus .015, as the model's checks read it, or plus only."
   ]
  },
  {
   "id": "MS27404D",
   "slug": "ms27404d",
   "title": "Adapter, straight, reusable, tube to hose, low pressure",
   "class": "Ohio",
   "folder": "Ohio/MS27404D Adapter, straight",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 6,
   "dimensions": 42,
   "dimensions_met": 42,
   "kind": "Detail specification sheet",
   "dated": "15 June 2020",
   "status": "Active, 3 June 2026",
   "newest": "Revision D Notice 1 - Validation, 3 June 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-497-4281, adapter, straight, tube to hose, MS27404-4 (Ohio)"
   ],
   "files": {
    "package": "MS27404D package.pdf",
    "scan": "MS27404D legacy scan.pdf",
    "clean": "MS27404D clean copy.pdf",
    "record": "MS27404D validation record.pdf",
    "sheet": "MS27404D 3D model.pdf",
    "parts": "MS27404D parts list.pdf",
    "inspection": "MS27404D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS27404-6-freecad.png",
    "pair": "Models/views/MS27404-6-pair.png",
    "record": "Models/views/MS27404-6-record.png",
    "front": "Models/views/MS27404-6-front.png",
    "top": "Models/views/MS27404-6-top.png",
    "right": "Models/views/MS27404-6-right.png",
    "cut": "Models/views/MS27404-6-cut.png"
   },
   "shown_part": "MS27404-6",
   "application": "FreeCAD 1.1.4",
   "modeled": "6 adapter bodies, one per MS27404 dash number -2 to -10, each with the nipple end and its 37 degree cone seat, the hex, the round body and the through bore.",
   "not_modeled": [
    "The MIL-DTL-38726/1 nut, whose dimensions this sheet refers out, so dimension E (nut face to nipple end) is not measured.",
    "Material, finish, lockwire and dry film letters of the part number, which do not change the adapter's shape; one solid stands for each dash number.",
    "The hex body option and the optional step and end stub drawn dashed at the body end in figure 1.",
    "The flared tube end that note 9 allows in place of the machined nipple.",
    "Edge breaks (note 5), hex corner chamfers, surface roughness, marking and color coding."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 d4774777b387.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "929 of 983 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "10 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 4 tables (116 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "6 solids in STEP AP242. 42 of 42 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 3 June 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet does not give the nipple head, neck and body diameters, the hex position or the nut length, so whether the MIL-DTL-38726/1 nut swivels freely at dimension E must be settled against the nut's own drawing."
   ]
  },
  {
   "id": "MS27467M w/AMENDMENT 1",
   "slug": "ms27467m-w-amendment-1",
   "title": "Connectors, plug, electrical, straight, crimp type, bayonet coupling, series I",
   "class": "Ohio",
   "folder": "Ohio/MS27467M w_AMENDMENT 1 Connectors, plug",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 27,
   "dimensions": 54,
   "dimensions_met": 54,
   "kind": "Detail specification sheet",
   "dated": "27 Aug 2024",
   "status": "Active, 27 August 2024",
   "newest": "Revision M Amendment 1 (amendment incorporated), 27 August 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5935-01-574-2020, connector, plug, electrical, MS27467 (Ohio)"
   ],
   "files": {
    "package": "MS27467M w_AMENDMENT 1 package.pdf",
    "scan": "MS27467M w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MS27467M w_AMENDMENT 1 clean copy.pdf",
    "record": "MS27467M w_AMENDMENT 1 validation record.pdf",
    "sheet": "MS27467M w_AMENDMENT 1 3D model.pdf",
    "parts": "MS27467M w_AMENDMENT 1 parts list.pdf",
    "inspection": "MS27467M w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS27467P25-freecad.png",
    "pair": "Models/views/MS27467P25-pair.png",
    "record": "Models/views/MS27467P25-record.png",
    "front": "Models/views/MS27467P25-front.png",
    "top": "Models/views/MS27467P25-top.png",
    "right": "Models/views/MS27467P25-right.png",
    "cut": "Models/views/MS27467P25-cut.png"
   },
   "shown_part": "MS27467P25",
   "application": "FreeCAD 1.1.4",
   "modeled": "27 envelope solids, one per class E, P and T at each shell size 9 to 25: a coupling ring cylinder at DD max and a smaller rear body, overall length L max for the class.",
   "not_modeled": [
    "The front and rear end configuration that figure 1 refers to the procurement specifications: the shell bore, inserts, contacts, bayonet and key features, the class E grommet, the class P potting area and the class T serrations.",
    "The interface dimensions and main key positions (note 3), which are given in MIL-DTL-38999, and the insert arrangements, which are given in MIL-STD-1560.",
    "The .391 max dimension measured rearward from the insert front face in the style P section, which lies inside the shell and needs the insert and contacts.",
    "The finish, insert arrangement, contact style (P or S) and polarizing position of the part number, which do not change DD or L; one solid stands for each class and shell size.",
    "The optional marking surface, coupling ring grip details, edge breaks and surface finish."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 05a739a501fa.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "366 of 385 items agreed. All 13 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "60 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (69 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "27 solids in STEP AP242. 54 of 54 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision M Amendment 1 (amendment incorporated), 27 August 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no diameter or length behind the coupling ring, so the rear body at 69 percent of DD is taken from figure 1 proportions; the class E, P and T rear end sizes must come from the procurement specification before the envelope is used as a space claim.",
    "Model. The metric table pairs 1.766 in with 43.86 mm, but 1.766 in is 44.86 mm; note 2 makes the metric values information only, so the inch value governs and the metric entry needs correction."
   ]
  },
  {
   "id": "MS27468K w/AMENDMENT 2",
   "slug": "ms27468k-w-amendment-2",
   "title": "Connectors, receptacle, electrical, jam-nut mounting, crimp type, bayonet coupling, series I",
   "class": "Ohio",
   "folder": "Ohio/MS27468K w_AMENDMENT 2 Connectors, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 27,
   "dimensions": 405,
   "dimensions_met": 405,
   "kind": "Detail specification sheet",
   "dated": "27 Aug 2024",
   "status": "Active, 27 August 2024",
   "newest": "Revision K Amendment 2 (all previous amendments incorporated), 27 August 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 3,
   "by_class": {
    "Ohio": 2,
    "Seawolf": 1
   },
   "stock_examples": [
    "5935-01-481-8646, connector, receptacle, electrical, MS27468T15F-05SC (Ohio)",
    "5935-01-481-9094, connector, receptacle, electrical, MS27468T15F5SB (Ohio)",
    "5935-01-466-3055, connector, receptacle, electrical, MS27468T13F98PB (Seawolf)"
   ],
   "files": {
    "package": "MS27468K w_AMENDMENT 2 package.pdf",
    "scan": "MS27468K w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MS27468K w_AMENDMENT 2 clean copy.pdf",
    "record": "MS27468K w_AMENDMENT 2 validation record.pdf",
    "sheet": "MS27468K w_AMENDMENT 2 3D model.pdf",
    "parts": "MS27468K w_AMENDMENT 2 parts list.pdf",
    "inspection": "MS27468K w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS27468P25-freecad.png",
    "pair": "Models/views/MS27468P25-pair.png",
    "record": "Models/views/MS27468P25-record.png",
    "front": "Models/views/MS27468P25-front.png",
    "top": "Models/views/MS27468P25-top.png",
    "right": "Models/views/MS27468P25-right.png",
    "cut": "Models/views/MS27468P25-cut.png"
   },
   "shown_part": "MS27468P25",
   "application": "FreeCAD 1.1.4",
   "modeled": "27 envelope solids of the jam-nut receptacle shell, one per class E, P and T at each shell size 9 to 25: rear body O, M thread, collar, flange DD with four flats S and the O-ring groove Z, X, Y in the mounting face, and a front end to L max.",
   "not_modeled": [
    "The MS3186 hex jam nut and the M25988/3 O-ring (dash numbers -019 to -134 by shell size), separate parts supplied with the receptacle, and the panel of .062 min to .125 max thickness.",
    "The front and rear end configuration that figure 1 refers to the procurement specifications and MIL-DTL-38999: bore, bayonet and key features, the main keyway and keyway positions (85\u00b0 and 120\u00b0 BSC, 90\u00b0 \u00b1 5\u00b0, note 3), the inserts of MIL-STD-1560, contacts, the class E, P and T rear ends, and the small lug drawn under the rear body.",
    "The .062 max dimension on the page 1 side view, which runs from the mounting face to a line inside the flange section that the sheet does not name.",
    "The thread form of M (pitch, class 2A tolerance and plating allowance) and the chamfer at the thread start.",
    "The marking surface, finish, edge breaks and surface texture.",
    "The finish, insert arrangement, contact style and polarizing position letters of the part number, which do not change the envelope; one solid stands for each class and shell size."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 1 scanned. SHA-256 be118a9a8e51.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "605 of 614 items agreed. All 14 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "235 checks on size series and limits. 7 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 4 tables (231 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "27 solids in STEP AP242. 405 of 405 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K Amendment 2 (all previous amendments incorporated), 27 August 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The .062 max dimension on the page 1 side view runs from the mounting face to a line inside the flange section that the sheet does not name, so the feature it limits must be identified before it can be checked.",
    "Model. The collar behind the flange may be .078 long while the panel may be as thin as .062, so on the thinnest panel the jam nut clamps only if the MS3186 nut clears the last .016 of the collar; this sheet does not show how."
   ]
  },
  {
   "id": "MS27769C",
   "slug": "ms27769c",
   "title": "Plug, pipe, countersink hex head",
   "class": "Ohio",
   "folder": "Ohio/MS27769C Plug, pipe",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 72,
   "dimensions": 576,
   "dimensions_met": 576,
   "kind": "Detail specification sheet",
   "dated": "3 January 2022",
   "status": "Active, 3 January 2022",
   "newest": "Revision C, 3 January 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-541-7749, plug, pipe, MS27769S2 (Ohio)"
   ],
   "files": {
    "package": "MS27769C package.pdf",
    "scan": "MS27769C legacy scan.pdf",
    "clean": "MS27769C clean copy.pdf",
    "record": "MS27769C validation record.pdf",
    "sheet": "MS27769C 3D model.pdf",
    "parts": "MS27769C parts list.pdf",
    "inspection": "MS27769C inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS27769A5-freecad.png",
    "pair": "Models/views/MS27769A5-pair.png",
    "record": "Models/views/MS27769A5-record.png",
    "front": "Models/views/MS27769A5-front.png",
    "top": "Models/views/MS27769A5-top.png",
    "right": "Models/views/MS27769A5-right.png",
    "cut": "Models/views/MS27769A5-cut.png"
   },
   "shown_part": "MS27769A5",
   "application": "FreeCAD 1.1.4",
   "modeled": "72 countersink hex head pipe plugs, one per MS27769 part number (dash numbers 1 to 8 in each of the nine material designators of Table I): a plain cylinder at the pipe outside diameter of the A thread, length E, with a hex socket D to clear depth C, a relief of diameter F, a closed-end wall B and a Y x 45\u00b0 chamfer on the small end.",
   "not_modeled": [
    "The optional construction, in which the hex socket ends in a conical point instead of the relief.",
    "The pipe thread form and its 1 in 16 taper (SAE-AS71051); the thread is a plain cylinder.",
    "The rounded ends of the relief groove drawn in the section; the relief is square-ended.",
    "The magnesium marking M, surface roughness (note 4), edge break (note 5), and the materials and finishes of Table I, which do not change the geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 0f2354adf519.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "575 of 600 items agreed. All 4 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "14 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (107 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "72 solids in STEP AP242. 576 of 576 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C, 3 January 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Dash numbers 7 and 8 print the threads as 1-11 ANPT and 1-1/4-11 ANPT, while the 1 and 1-1/4 inch ANPT and NPT sizes have 11-1/2 threads per inch; an engineer must confirm the pitch (the solids do not depend on it)."
   ]
  },
  {
   "id": "MS3400(NAVY)",
   "slug": "ms3400-navy",
   "title": "Connectors, receptacle, electric, wall mounting, front release, crimp contact, AN type",
   "class": "Ohio",
   "folder": "Ohio/MS3400(NAVY) Connectors, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 140,
   "dimensions": 1860,
   "dimensions_met": 1860,
   "kind": "Military standard",
   "dated": "23 MAR 76",
   "status": "Canceled, 23 December 2009",
   "newest": "Revision G Notice 3 - Cancellation, 23 December 2009",
   "superseding": "SAE-AS34001",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5935-01-491-4954, connector, receptacle, electrical, MS3400D12S-3PX (Ohio)"
   ],
   "files": {
    "package": "MS3400(NAVY) package.pdf",
    "scan": "MS3400(NAVY) legacy scan.pdf",
    "clean": "MS3400(NAVY) clean copy.pdf",
    "record": "MS3400(NAVY) validation record.pdf",
    "sheet": "MS3400(NAVY) 3D model.pdf",
    "parts": "MS3400(NAVY) parts list.pdf",
    "inspection": "MS3400(NAVY) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS3400DJ_10AXX-freecad.png",
    "pair": "Models/views/MS3400DJ_10AXX-pair.png",
    "record": "Models/views/MS3400DJ_10AXX-record.png",
    "front": "Models/views/MS3400DJ_10AXX-front.png",
    "top": "Models/views/MS3400DJ_10AXX-top.png",
    "right": "Models/views/MS3400DJ_10AXX-right.png",
    "cut": "Models/views/MS3400DJ_10AXX-cut.png"
   },
   "shown_part": "MS3400DJ 10AXX",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MS3400 wall mounting receptacle for every shell size 8S to 48 (class D, L, U and W holes and class K holes, each contact length) and of every class DJ receptacle and MS3437B backshell assembly, with the square flange and its four mounting holes.",
   "not_modeled": [
    "Insert arrangements, contacts, polarizing key, front and rear end configuration and internal details, which MIL-C-5015 and MIL-STD-1651 define.",
    "Coupling and backshell threads, modeled as plain cylinders at the major diameter.",
    "Material designators S and T and finishes, which do not change the dimensions.",
    "The .375 longer class DJ assemblies with size 8, 4 and 0 contacts (note 3), which carry the same part number pattern as the size 16 and 12 contact length that is modeled.",
    "The MS3437B backshell's own shape between the flange and the clamp, and the clamp saddles and screws."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 049e942de8c1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,038 of 1,543 items agreed. All 30 differences were settled against the page image. A second pass settled 2 from the same value on another sheet of the series.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "498 checks on size series and limits. 4 breaks checked against the scan: all are as printed. 715 values are also printed on 9 other sheets of the series: 712 match, 3 differ as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 3 tables (1,123 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "140 solids in STEP AP242. 1,860 of 1,860 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision G Notice 3 - Cancellation, 23 December 2009.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Differs within the series. S, flange, beside the receptacle number, 16S: 1.284 here; MS3402 prints 1.281. MS3400 page 4 prints 1.284 clearly in the S column of all four rows on MS3400D-16S-XX (17AXX to 17EXX); MS3402 page 2 prints 1.281 clearly for size 16S, and MS3400's own page 2 table prints 1.281 for 16S.",
    "Differs within the series. S, flange, beside the receptacle number, 16: 1.284 here; MS3402 prints 1.281. MS3400 page 4 prints 1.284 clearly in the S column of all four rows on MS3400D-16-XX (16AXX to 16EXX); MS3402 page 2 prints 1.281 clearly for size 16, and MS3400's own page 2 table prints 1.281 for 16.",
    "Differs within the series. T, mounting hole, beside the receptacle number, 14: .120(G) here; MS3402 prints .120. Both sheets print .120 for size 14. The cell on MS3400 page 4 (row 14EXX) also carries the circled G revision mark printed in the right margin beside that row, which the reading rules keep in the cell; MS3402 prints no mark there.",
    "Model. The class DJ assembly table on page 4 prints flange width S as 1.284 for every assembly on shell sizes 16S and 16, while the receptacle table on page 2 prints S as 1.281 +/-.031 for the same sizes. The engineer must decide which nominal applies to the DJ assemblies; the solids use 1.284.",
    "Model. The class DJ assembly table on page 4 gives mounting hole T as a maximum diameter (.120, .147 or .173 MAX), while the page 2 receptacle table gives T for classes D, L, U and W as the same values +.010 -.005. Only the band from 5 thousandths under the nominal to the nominal meets both, so the engineer must decide which tolerance governs."
   ]
  },
  {
   "id": "MS51500G w/ AMENDMENT 1",
   "slug": "ms51500g-w-amendment-1",
   "title": "Fittings, hydraulic tube, flared 37 degree and flareless, adapter, straight, male pipe end to tube",
   "class": "Ohio",
   "folder": "Ohio/MS51500G w_ AMENDMENT 1 Fittings, hydraulic tube",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 24,
   "dimensions": 191,
   "dimensions_met": 191,
   "kind": "Detail specification sheet",
   "dated": "8 July 2026",
   "status": "Active, 8 July 2026",
   "newest": "Revision G Amendment 1 (amendment incorporated), 8 July 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-322-8457, adapter, straight, pipe to tube, MS51500A6-6 (Ohio)"
   ],
   "files": {
    "package": "MS51500G w_ AMENDMENT 1 package.pdf",
    "scan": "MS51500G w_ AMENDMENT 1 legacy scan.pdf",
    "clean": "MS51500G w_ AMENDMENT 1 clean copy.pdf",
    "record": "MS51500G w_ AMENDMENT 1 validation record.pdf",
    "sheet": "MS51500G w_ AMENDMENT 1 3D model.pdf",
    "parts": "MS51500G w_ AMENDMENT 1 parts list.pdf",
    "inspection": "MS51500G w_ AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS51500B8-8-freecad.png",
    "pair": "Models/views/MS51500B8-8-pair.png",
    "record": "Models/views/MS51500B8-8-record.png",
    "front": "Models/views/MS51500B8-8-front.png",
    "top": "Models/views/MS51500B8-8-top.png",
    "right": "Models/views/MS51500B8-8-right.png",
    "cut": "Models/views/MS51500B8-8-cut.png"
   },
   "shown_part": "MS51500B8-8",
   "application": "FreeCAD 1.1.4",
   "modeled": "24 straight adapter bodies, one per body designator B2 to B32 (bodies of assemblies MS51500A2 to A32; the material and finish letter does not change the geometry): a 37 degree flared tube end on straight thread B, a hex C, a male pipe end on thread A, overall length L, bore D from the tube end and bore D1 counterbored from the pipe end to depth S.",
   "not_modeled": [
    "The nut MS51531 and sleeve MS51533 that complete each assembly (note 4); the solids are the body alone.",
    "The 30 degree inverted flare seat on the inside edge of the pipe end for PIN suffix 1 (note 6, detail G), of which the sheet gives only the angle.",
    "Dimensions the sheet refers to SAE-J514/1 (note 7): flare nose details beyond the 37 degree angle, the tube end, hex and pipe end lengths, the thread relief next to the hex, the neck between the hex and the pipe thread, and end chamfers.",
    "Thread forms, the UNF/UN class 2A limits and the 1 in 16 NPTF taper; edge breaks (note 3), hex corner chamfers, material, finish and marking.",
    "The optional construction of note 5 with one through passage at the smaller diameter, except on B14, which prints no S."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 1a7f4ca05d8a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,195 of 1,277 items agreed. All 23 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "23 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (312 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "24 solids in STEP AP242. 191 of 191 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Amendment 1 (amendment incorporated), 8 July 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The body designator for assembly A5-4 prints as AB5-4 in the first table (page 2) and B5-4 in the second (page 3); the solid is named MS51500B5-4.",
    "Model. On rows where D1 is smaller than D (A5, A6-2, A6, A8-4, A10-6, A12-8, A16-12), note 5 says the end is counterbored to the larger diameter for depth S while figure 1 measures S from the pipe end, which carries D1; the solids keep D1 at the pipe end for depth S and D through the rest.",
    "Model. The inverted flare seat of PIN suffix 1 has only its 30 degree angle on the sheet, with no diameter or depth, so those parts cannot be modeled until the seat size is set."
   ]
  },
  {
   "id": "MS51520D w/AMENDMENT 1",
   "slug": "ms51520d-w-amendment-1",
   "title": "Fittings, hydraulic tube, flared 37 degree, nipple, bulkhead",
   "class": "Ohio",
   "folder": "Ohio/MS51520D w_AMENDMENT 1 Fittings, hydraulic tube",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 13,
   "dimensions": 104,
   "dimensions_met": 104,
   "kind": "Detail specification sheet",
   "dated": "26 September 2025",
   "status": "Active, 26 September 2025",
   "newest": "Revision D Amendment 1 (amendment incorporated), 26 September 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-679-9280, adapter, straight, tube to boss, MS51520A4 (Ohio)"
   ],
   "files": {
    "package": "MS51520D w_AMENDMENT 1 package.pdf",
    "scan": "MS51520D w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MS51520D w_AMENDMENT 1 clean copy.pdf",
    "record": "MS51520D w_AMENDMENT 1 validation record.pdf",
    "sheet": "MS51520D w_AMENDMENT 1 3D model.pdf",
    "parts": "MS51520D w_AMENDMENT 1 parts list.pdf",
    "inspection": "MS51520D w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS51520B10-freecad.png",
    "pair": "Models/views/MS51520B10-pair.png",
    "record": "Models/views/MS51520B10-record.png",
    "front": "Models/views/MS51520B10-front.png",
    "top": "Models/views/MS51520B10-top.png",
    "right": "Models/views/MS51520B10-right.png",
    "cut": "Models/views/MS51520B10-cut.png"
   },
   "shown_part": "MS51520B10",
   "application": "FreeCAD 1.1.4",
   "modeled": "13 bulkhead nipple bodies, one per body designator B2 to B32 (bodies of assemblies MS51520A2 to A32; the material and finish letter does not change the geometry): a short threaded end and a long threaded bulkhead end I1, each B with a 37 degree flare-seat cone, a hex C between them, overall length L4 and bore D through.",
   "not_modeled": [
    "The tube nuts MS51531, sleeves MS51533, bulkhead nut MS51860 and O-ring SAE-AS28778 drawn on the assembly in figure 1.",
    "Dimensions the sheet refers to SAE-J514/1 (note 4): flare seat and nose dimensions, the short end length, hex length, thread lengths and the relief grooves next to the hex.",
    "Thread form and class 2A limits, end chamfers, edge breaks (note 3), material, finish and marking."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 2e9f6560625d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "993 of 1,015 items agreed. All 12 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "24 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (143 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "13 solids in STEP AP242. 104 of 104 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Amendment 1 (amendment incorporated), 26 September 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Body B10 (assembly A10) prints its hex C as '1-1/81', which reads as 1 1/81 = 1.012 in and is modeled so; the neighbouring sizes (1 for B8, 1-3/8 for B12) point to 1-1/8 with a stray 1, and the sheet does not settle which."
   ]
  },
  {
   "id": "MS51525D",
   "slug": "ms51525d",
   "title": "Fittings, hydraulic tube, flared 37 degree and flareless, steel; adapter, straight, tube to boss, O-ring, 37 degree flared",
   "class": "Ohio",
   "folder": "Ohio/MS51525D Fittings, hydraulic tube",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 23,
   "dimensions": 184,
   "dimensions_met": 184,
   "kind": "Detail specification sheet",
   "dated": "30 September 2021",
   "status": "Active, 30 September 2021",
   "newest": "Revision D, 30 September 2021",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Ohio": 2
   },
   "stock_examples": [
    "4730-00-491-9576, adapter, straight, tube to boss, MS51525A6 (Ohio)",
    "4730-00-834-5035, adapter, straight, tube to boss, MS51525A4S (Ohio)"
   ],
   "files": {
    "package": "MS51525D package.pdf",
    "scan": "MS51525D legacy scan.pdf",
    "clean": "MS51525D clean copy.pdf",
    "record": "MS51525D validation record.pdf",
    "sheet": "MS51525D 3D model.pdf",
    "parts": "MS51525D parts list.pdf",
    "inspection": "MS51525D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS51525B10-freecad.png",
    "pair": "Models/views/MS51525B10-pair.png",
    "record": "Models/views/MS51525B10-record.png",
    "front": "Models/views/MS51525B10-front.png",
    "top": "Models/views/MS51525B10-top.png",
    "right": "Models/views/MS51525B10-right.png",
    "cut": "Models/views/MS51525B10-cut.png"
   },
   "shown_part": "MS51525B10",
   "application": "FreeCAD 1.1.4",
   "modeled": "23 straight adapter bodies, one per body designator B2 to B32 (bodies of assemblies MS51525A2 to A32; the material and finish letter does not change the geometry): a 37 degree flared tube end with thread B, a hex C1, an O-ring boss end with thread A for the length I1 from the hex face, overall length L and bore D through.",
   "not_modeled": [
    "The tube nut MS51531, sleeve MS51533 and O-ring SAE-AS28778 that make up or go with the assembly in figure 1.",
    "Dimensions the sheet refers to SAE-J514 (note 4): the hex thickness and tube end length, flare nose and pilot dimensions, the thread reliefs drawn next to the hex, and the O-ring boss end undercut and chamfers.",
    "Thread form and class 2A limits (ASME B1.1), hex corner chamfers, edge breaks (note 3), material, finish and marking."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 3eee9175f5e2.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,101 of 1,133 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "22 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (276 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "23 solids in STEP AP242. 184 of 184 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D, 30 September 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The A24 row prints tube OD 1.5000 (31.750), but 1.5000 inch is 38.100 mm; the metric figure repeats the A20 row, and the model uses the inch value.",
    "Model. The D tolerance cells for A16 to A16-20 and for A32 print the minus metric tolerance as .013 mm, where -.005 inch is 0.13 mm."
   ]
  },
  {
   "id": "MS51527G",
   "slug": "ms51527g",
   "title": "Fittings, hydraulic tube, flared, 37 degree and flareless, steel; elbow, tube to boss, 90 degree, O-ring, 37 degree flared",
   "class": "Ohio",
   "folder": "Ohio/MS51527G Fittings, hydraulic tube",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 13,
   "dimensions": 130,
   "dimensions_met": 130,
   "kind": "Detail specification sheet",
   "dated": "12 January 2023",
   "status": "Active, 12 January 2023",
   "newest": "Revision G, 12 January 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Ohio": 2
   },
   "stock_examples": [
    "4730-00-762-2120, elbow, tube to boss, MS51527A6S (Ohio)",
    "4730-00-887-8070, elbow, tube to boss, MS51527A8S (Ohio)"
   ],
   "files": {
    "package": "MS51527G package.pdf",
    "scan": "MS51527G legacy scan.pdf",
    "clean": "MS51527G clean copy.pdf",
    "record": "MS51527G validation record.pdf",
    "sheet": "MS51527G 3D model.pdf",
    "parts": "MS51527G parts list.pdf",
    "inspection": "MS51527G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS51527B10-freecad.png",
    "pair": "Models/views/MS51527B10-pair.png",
    "record": "Models/views/MS51527B10-record.png",
    "front": "Models/views/MS51527B10-front.png",
    "top": "Models/views/MS51527B10-top.png",
    "right": "Models/views/MS51527B10-right.png",
    "cut": "Models/views/MS51527B10-cut.png"
   },
   "shown_part": "MS51527B10",
   "application": "FreeCAD 1.1.4",
   "modeled": "13 elbow bodies, one per body designator B2 to B32 (bodies of assemblies MS51527A2 to A32; the material and finish letter does not change the geometry): a block with a 37 degree flared tube end and, at 90 degrees to it, an O-ring boss end with full thread J2, relief G1 and shoulder at I3, and bore D through both legs.",
   "not_modeled": [
    "The tube nut MS51531, sleeve MS51533 and O-ring SAE-AS28778 that make up the assembly, and the locknut and backup washer drawn on the boss end in figure 1.",
    "Dimensions the sheet refers to SAE-J514 (note 4): flare seat and nose dimensions, tube end thread length, body size and wrench flats (note 8), the forged elbow outline, the O-ring relief width and the thread runout next to the shoulder.",
    "Thread form and class 2A limits, end chamfers, edge breaks (note 3), material, finish and marking."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 0dfed116e3ee.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "991 of 1,017 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (169 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "13 solids in STEP AP242. 130 of 130 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G, 12 January 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS51528D",
   "slug": "ms51528d",
   "title": "Fittings, hydraulic tube, flared, 37 degree and flareless, steel; elbow, tube to boss, 45 degree, O-ring, 37 degree flared",
   "class": "Ohio",
   "folder": "Ohio/MS51528D Fittings, hydraulic tube",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 13,
   "dimensions": 143,
   "dimensions_met": 143,
   "kind": "Detail specification sheet",
   "dated": "30 September 2021",
   "status": "Active, 30 September 2021",
   "newest": "Revision D, 30 September 2021",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Ohio": 2
   },
   "stock_examples": [
    "4730-00-092-3798, elbow, tube to boss, MS51528A6S (Ohio)",
    "4730-01-121-2848, elbow, tube to boss, MS51528-B4S (Ohio)"
   ],
   "files": {
    "package": "MS51528D package.pdf",
    "scan": "MS51528D legacy scan.pdf",
    "clean": "MS51528D clean copy.pdf",
    "record": "MS51528D validation record.pdf",
    "sheet": "MS51528D 3D model.pdf",
    "parts": "MS51528D parts list.pdf",
    "inspection": "MS51528D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS51528B10-freecad.png",
    "pair": "Models/views/MS51528B10-pair.png",
    "record": "Models/views/MS51528B10-record.png",
    "front": "Models/views/MS51528B10-front.png",
    "top": "Models/views/MS51528B10-top.png",
    "right": "Models/views/MS51528B10-right.png",
    "cut": "Models/views/MS51528B10-cut.png"
   },
   "shown_part": "MS51528B10",
   "application": "FreeCAD 1.1.4",
   "modeled": "13 45 degree elbow bodies, one per body designator B2 to B32 (bodies of assemblies MS51528A2 to A32; the material and finish letter does not change the geometry): a 37 degree flared tube end at M2 and an O-ring boss end at M3 from the point where the two axes meet, the boss end with full thread J2, relief G1 and shoulder at I3, and bore D through both legs.",
   "not_modeled": [
    "The tube nut MS51531, sleeve MS51533 and O-ring SAE-AS28778 that make up the assembly, and the locknut and backup washer drawn on the boss end in figure 1.",
    "Dimensions the sheet refers to SAE-J514 (note 4): flare seat nose dimensions, tube end thread length, body size and wrench flats (note 8), the O-ring relief width and the thread runout next to the shoulder.",
    "Thread form and class 2A limits, end chamfers, edge breaks (note 3), material, finish and marking."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 6063348e63e8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,007 of 1,008 items agreed. All 1 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (169 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "13 solids in STEP AP242. 143 of 143 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D, 30 September 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS51530D",
   "slug": "ms51530d",
   "title": "Fittings, hydraulic tube, flared, 37 degree and flareless, steel; tee, tube to boss, boss on run, O-ring, 37 degree flared",
   "class": "Ohio",
   "folder": "Ohio/MS51530D Fittings, hydraulic tube",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 13,
   "dimensions": 143,
   "dimensions_met": 143,
   "kind": "Detail specification sheet",
   "dated": "30 September 2021",
   "status": "Active, 30 September 2021",
   "newest": "Revision D, 30 September 2021",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-787-9402, tee, tube to boss, MS51530A4S (Ohio)"
   ],
   "files": {
    "package": "MS51530D package.pdf",
    "scan": "MS51530D legacy scan.pdf",
    "clean": "MS51530D clean copy.pdf",
    "record": "MS51530D validation record.pdf",
    "sheet": "MS51530D 3D model.pdf",
    "parts": "MS51530D parts list.pdf",
    "inspection": "MS51530D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS51530B10-freecad.png",
    "pair": "Models/views/MS51530B10-pair.png",
    "record": "Models/views/MS51530B10-record.png",
    "front": "Models/views/MS51530B10-front.png",
    "top": "Models/views/MS51530B10-top.png",
    "right": "Models/views/MS51530B10-right.png",
    "cut": "Models/views/MS51530B10-cut.png"
   },
   "shown_part": "MS51530B10",
   "application": "FreeCAD 1.1.4",
   "modeled": "13 tee bodies, one per body designator B2 to B32 (bodies of assemblies MS51530A2 to A32; the material and finish letter does not change the geometry): a block with 37 degree flared tube ends on the run and the branch, an O-ring boss end on the run with full thread J2, relief G1 and shoulder at I3, bore D through the run and a branch bore that opens into it.",
   "not_modeled": [
    "The tube nuts MS51531, sleeves MS51533 and O-ring SAE-AS28778 that make up the assembly, and the locknut and backup washer drawn on the boss end in figure 1.",
    "Dimensions the sheet refers to SAE-J514 (note 4): flare seat and nose dimensions, tube end thread lengths, body size and wrench flats (note 8), the O-ring relief width and the thread runout next to the shoulder.",
    "Thread form and class 2A limits, end chamfers, edge breaks (note 3), material, finish and marking."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 f6370ee94797.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,005 of 1,005 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (169 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "13 solids in STEP AP242. 143 of 143 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D, 30 September 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS51839E w/AMENDMENT 1",
   "slug": "ms51839e-w-amendment-1",
   "title": "Elbow, tube to boss, 90 degree, O-ring, flareless type, hydraulic",
   "class": "Ohio",
   "folder": "Ohio/MS51839E w_AMENDMENT 1 Elbow, tube to boss",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 13,
   "dimensions": 130,
   "dimensions_met": 130,
   "kind": "Detail specification sheet",
   "dated": "10 July 2019",
   "status": "Active, 23 August 2024",
   "newest": "Revision E Notice 1 - Validation, 23 August 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "4730-00-727-9795, elbow, tube to boss, MS51839-23SS (Ohio)"
   ],
   "files": {
    "package": "MS51839E w_AMENDMENT 1 package.pdf",
    "scan": "MS51839E w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MS51839E w_AMENDMENT 1 clean copy.pdf",
    "record": "MS51839E w_AMENDMENT 1 validation record.pdf",
    "sheet": "MS51839E w_AMENDMENT 1 3D model.pdf",
    "parts": "MS51839E w_AMENDMENT 1 parts list.pdf",
    "inspection": "MS51839E w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS51839-27-freecad.png",
    "pair": "Models/views/MS51839-27-pair.png",
    "record": "Models/views/MS51839-27-record.png",
    "front": "Models/views/MS51839-27-front.png",
    "top": "Models/views/MS51839-27-top.png",
    "right": "Models/views/MS51839-27-right.png",
    "cut": "Models/views/MS51839-27-cut.png"
   },
   "shown_part": "MS51839-27",
   "application": "FreeCAD 1.1.4",
   "modeled": "13 elbow bodies, one per body dash number MS51839-21 to MS51839-33 (bodies of assemblies MS51839-1 to -13; the material and finish letter and the sleeve style do not change the body): a block with a flareless tube end at M and an O-ring boss end at M7 on axes at 90 degrees, each threaded B, a tube socket to depth K, full thread J3 and relief G1 on the boss end, and drill D through both ends.",
   "not_modeled": [
    "The nut MS51823, sleeve MS51825 and O-ring SAE-AS28778 that make up the assembly (note 5), and the locknut and backup washer drawn on the boss end in figure 1.",
    "Dimensions the sheet refers to SAE-J514 (note 4) and MS51889: the flareless cone at the tube end mouth, the tube socket diameter, the body forging shape and wrench flats, the O-ring relief width, the thread runout next to the body and the boss end chamfer.",
    "Thread form and class 2A limits, edge breaks (note 3), material and finish (table I) and marking."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 f3e0caf04744.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "830 of 874 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "48 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 3 tables (192 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "13 solids in STEP AP242. 130 of 130 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 1 - Validation, 23 August 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS51843E w/AMENDMENT 2",
   "slug": "ms51843e-w-amendment-2",
   "title": "Adapter, straight, tube to boss, O-ring, flareless type, hydraulic",
   "class": "Ohio",
   "folder": "Ohio/MS51843E w_AMENDMENT 2 Adapter, straight",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 13,
   "dimensions": 117,
   "dimensions_met": 117,
   "kind": "Detail specification sheet",
   "dated": "21 November 2019",
   "status": "Active, 19 November 2024",
   "newest": "Revision E Notice 1 - Validation, 19 November 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 4,
   "by_class": {
    "Ohio": 3,
    "Seawolf": 1
   },
   "stock_examples": [
    "4730-00-407-0558, adapter, straight, tube to boss, MS51843-25 (Ohio)",
    "4730-00-492-6040, adapter, straight, tube to boss, MS51843-6P (Ohio)",
    "4730-01-019-9815, adapter, straight, tube to boss, MS51843-26 (Ohio)",
    "4730-01-417-1971, adapter, straight, tube to boss, MS51843-3SS (Seawolf)"
   ],
   "files": {
    "package": "MS51843E w_AMENDMENT 2 package.pdf",
    "scan": "MS51843E w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MS51843E w_AMENDMENT 2 clean copy.pdf",
    "record": "MS51843E w_AMENDMENT 2 validation record.pdf",
    "sheet": "MS51843E w_AMENDMENT 2 3D model.pdf",
    "parts": "MS51843E w_AMENDMENT 2 parts list.pdf",
    "inspection": "MS51843E w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS51843-27-freecad.png",
    "pair": "Models/views/MS51843-27-pair.png",
    "record": "Models/views/MS51843-27-record.png",
    "front": "Models/views/MS51843-27-front.png",
    "top": "Models/views/MS51843-27-top.png",
    "right": "Models/views/MS51843-27-right.png",
    "cut": "Models/views/MS51843-27-cut.png"
   },
   "shown_part": "MS51843-27",
   "application": "FreeCAD 1.1.4",
   "modeled": "13 straight adapter bodies, one per body dash number -21 to -33 (bodies of assemblies -1 to -13; the material, finish and sleeve letters do not change the body geometry): a flareless tube end with thread B and a tube counterbore of depth K, a C4 hex, a G1 groove against the hex face, an O-ring boss end with thread B for the length I3 from the hex face, overall length L5 and drill D through.",
   "not_modeled": [
    "The nut MS51823, sleeve MS51825 and O-ring SAE-AS28778 drawn with the assembly in figure 1.",
    "Dimensions the sheet leaves to SAE-J514 (note 4): the 24 degree flareless cone at the tube end mouth, the tube counterbore diameter and tube stop, the hex thickness and tube end length, the groove width and the boss end chamfers.",
    "Thread form, pitch and class 2A limits (ASME B1.1), hex corner chamfers, edge breaks (note 3), material, finish and marking."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 e5e24f601533.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "891 of 906 items agreed. All 16 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "60 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 3 tables (192 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "13 solids in STEP AP242. 117 of 117 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 1 - Validation, 19 November 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Assembly -4 prints Tube OD .3125 (7.936), but .3125 inch is 7.9375 mm; the inch value governs (note 2), and the tube OD sets only the counterbore diameter assumed here."
   ]
  },
  {
   "id": "MS51958",
   "slug": "ms51958",
   "title": "Screw, machine pan-head, cross-recessed, corrosion resisting steel, UNF-2A",
   "class": "Ohio",
   "folder": "Ohio/MS51958 Screw, machine pan-head",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 126,
   "dimensions": 1154,
   "dimensions_met": 1154,
   "kind": "Military standard",
   "dated": "11 FEB 83",
   "status": "Canceled, 30 September 1999",
   "newest": "Revision C Notice 1 - Cancellation, 30 September 1999",
   "superseding": "NASM51958",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "5305-00-216-8318, screw, machine, MS51958-69B (Ohio)"
   ],
   "files": {
    "package": "MS51958 package.pdf",
    "scan": "MS51958 legacy scan.pdf",
    "clean": "MS51958 clean copy.pdf",
    "record": "MS51958 validation record.pdf",
    "sheet": "MS51958 3D model.pdf",
    "parts": "MS51958 parts list.pdf",
    "inspection": "MS51958 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS51958-119-freecad.png",
    "pair": "Models/views/MS51958-119-pair.png",
    "record": "Models/views/MS51958-119-record.png",
    "front": "Models/views/MS51958-119-front.png",
    "top": "Models/views/MS51958-119-top.png",
    "right": "Models/views/MS51958-119-right.png",
    "cut": "Models/views/MS51958-119-cut.png"
   },
   "shown_part": "MS51958-119",
   "application": "FreeCAD 1.1.4",
   "modeled": "Pan-head machine screws for all 126 dash numbers, sizes .060 to .375, each with head, under-head fillet, unthreaded body at D1 and a thread envelope at the nominal major diameter to length L.",
   "not_modeled": [
    "The cross recess, which the sheet defines by reference to MS9006.",
    "Thread form, pitch and class 2A tolerances (FED-STD-H28/2); the thread is a plain cylinder.",
    "Material, cleaning, black oxide coating (B suffix), magnetic permeability and tensile load."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, all scanned. SHA-256 f55480f5cab1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,257 of 1,973 items agreed. All 63 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "630 checks on size series and limits. 7 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 6 tables (1,478 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "126 solids in STEP AP242. 1,154 of 1,154 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 1 - Cancellation, 30 September 1999. ASSIST also holds Revision C Amendment 1 (5 October 1992). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The length tables on pages 1 and 2 say only that screws up to 2 inches long are threaded to within a distance of not less than 2 threads of the bearing surface of the head, and the sheet gives no maximum unthreaded length. The models leave exactly 2 thread pitches unthreaded; an engineer must set the longest unthreaded length allowed, from procurement specification FF-S-92."
   ]
  },
  {
   "id": "W-L-101H",
   "slug": "w-l-101h",
   "title": "Lamp, incandescent (electric, large tungsten-filament) (general specification)",
   "class": "Ohio",
   "folder": "Ohio/W-L-101H Lamp, incandescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "December 6, 1977",
   "status": "Active, 8 February 1979",
   "newest": "Revision H Supplement 1, 8 February 1979",
   "superseding": "",
   "preparing_activity": "General Services Administration",
   "stock_numbers": 1,
   "by_class": {
    "Ohio": 1
   },
   "stock_examples": [
    "6240-00-155-7881, lamp, incandescent, W-L-101 (Ohio)"
   ],
   "files": {
    "package": "W-L-101H package.pdf",
    "scan": "W-L-101H legacy scan.pdf",
    "clean": "W-L-101H clean copy.pdf",
    "record": "W-L-101H validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, all scanned. SHA-256 c9900eded7b9.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,233 of 2,266 items agreed. All 21 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "46 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 5 tables (86 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "W-L-101H is the general specification for large tungsten-filament incandescent lamps that has no drawing or dimension table: it requires each lamp to meet the average life, lumens per watt and wattage values of its detailed specification, gives qualification sample sizes by lamp wattage from 15 to 1500 watts (4.2.2), life and lumens-per-watt maintenance tolerances by sample size (Tables I and II) and end-item and preparation-for-delivery defect classes (Tables III and IV), leaves each lamp\u2019s classification to its slash sheet (W-L-101/1), and sends lamp dimensions to the applicable ANSI standard (C78), or to the manufacturer\u2019s established tolerances where none exists (3.8), which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Supplement 1, 8 February 1979.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-1842",
   "slug": "a-a-1842",
   "title": "Lamp, fluorescent (F8T5/CW)",
   "class": "Seawolf",
   "folder": "Seawolf/A-A-1842 Lamp, fluorescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "June 12, 1981",
   "status": "Active, 12 June 1981",
   "newest": "Base Document, 12 June 1981",
   "superseding": "",
   "preparing_activity": "General Services Administration",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "6240-00-299-5546, lamp, fluorescent, A-A-1842 (Seawolf)"
   ],
   "files": {
    "package": "A-A-1842 package.pdf",
    "scan": "A-A-1842 legacy scan.pdf",
    "clean": "A-A-1842 clean copy.pdf",
    "record": "A-A-1842 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 99c3bca148d3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "246 of 273 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 0 tables (0 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-1842 is a commercial item description for the 8 watt preheat-start F8T5/CW fluorescent lamp that has no drawing, states only salient characteristics (T-5 bulb, 12 inch nominal length, miniature bipin base, rated life, lumens, cool white color) and sends dimensional and electrical characteristics to ANSI C78.2, which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Base Document, 12 June 1981.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-50588A",
   "slug": "a-a-50588a",
   "title": "Lamp, incandescent, T-3-1/4, miniature bayonet, single contact",
   "class": "Seawolf",
   "folder": "Seawolf/A-A-50588A Lamp, incandescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 9,
   "dimensions": 81,
   "dimensions_met": 81,
   "kind": "Commercial item description",
   "dated": "15 June 2021",
   "status": "Active, 27 April 2026",
   "newest": "Revision A Notice 1 - Validation, 27 April 2026",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "6240-01-389-8565, lamp, incandescent, A-A-50588 (Seawolf)"
   ],
   "files": {
    "package": "A-A-50588A package.pdf",
    "scan": "A-A-50588A legacy scan.pdf",
    "clean": "A-A-50588A clean copy.pdf",
    "record": "A-A-50588A validation record.pdf",
    "sheet": "A-A-50588A 3D model.pdf",
    "parts": "A-A-50588A parts list.pdf",
    "inspection": "A-A-50588A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/A50588-5-freecad.png",
    "pair": "Models/views/A50588-5-pair.png",
    "record": "Models/views/A50588-5-record.png",
    "front": "Models/views/A50588-5-front.png",
    "top": "Models/views/A50588-5-top.png",
    "right": "Models/views/A50588-5-right.png",
    "cut": "Models/views/A50588-5-cut.png"
   },
   "shown_part": "A50588-5",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the 9 A-A-50588 lamps (-1, -2, -3, -4, -5, -6, -7, -8 and -9): a .4063 T-3-1/4 bulb with a rounded end, .9375 from the tip of the bulb to the bayonet pins and 1.1875 overall, on a plain miniature bayonet base with two pins and a single end contact.",
   "not_modeled": [
    "The light center length of each dash number (0.5 to 0.78125 inch): the solid has no filament, so each part records it as a parameter and is checked to place the light center inside the bulb at the .9375 maximum.",
    "The filament, the glass wall, the lead wires and the inside of the lamp.",
    "The true form of the miniature bayonet base, its pins, insulator and contact, and the rounded shoulder of the bulb and corners of the base, which figure 1 draws without dimensions.",
    "The bulb finish, amps, volts, candle power and hours of life of each dash number, which do not change the solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 fce92de2acf2.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "574 of 617 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (102 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 81 of 81 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 27 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet calls for a miniature bayonet, single contact base but dimensions none of it and names no base standard, so the solids carry an assumed shell, pins and contact; an engineer must take the base dimensions from the miniature bayonet base standard before using the solids for a socket fit.",
    "Model. The .4063 bulb diameter carries no tolerance and no MAX; an engineer must set its limits before using the solids as a space claim.",
    "Model. Table I prints 0.71825 for the light center length of A50588-7, the only value in the table that is not a whole number of 32nds, while MS15571 gives 23/32 (0.71875) for MS15571-9, which Table II cross-references to A50588-7; the solid and its light center checks hold for either value, but an engineer must confirm which one the lamp is bought to."
   ]
  },
  {
   "id": "A-A-59565",
   "slug": "a-a-59565",
   "title": "Hose, rubber, and hose assemblies, rubber: pneumatic (yarn or fabric reinforced)",
   "class": "Seawolf",
   "folder": "Seawolf/A-A-59565 Hose, rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "3 July 2001",
   "status": "Active, 6 May 2019",
   "newest": "Notice 3 - Validation, 6 May 2019",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4720-01-446-7324, hose, nonmetallic, A-A-59565 (Seawolf)"
   ],
   "files": {
    "package": "A-A-59565 package.pdf",
    "scan": "A-A-59565 legacy scan.pdf",
    "clean": "A-A-59565 clean copy.pdf",
    "record": "A-A-59565 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 3f9eee068a1b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,277 of 2,308 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "150 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 4 tables (277 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-59565 is a commercial item description for yarn or fabric reinforced pneumatic rubber hose that defines materials, inside diameter sizes and tolerances, minimum tube and cover wall thickness, pressure and physical test values, and size code numbers, but no drawing or outside diameter, so it does not fix a part shape.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Notice 3 - Validation, 6 May 2019.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "L-P-410a",
   "slug": "l-p-410a",
   "title": "Plastic, polyamide (nylon), rigid: rods, tubes, flats, molded and cast parts",
   "class": "Seawolf",
   "folder": "Seawolf/L-P-410a Plastic, polyamide",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 17,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "March 16, 1966",
   "status": "Active, 29 August 2022",
   "newest": "Revision A Notice 1 - Validation, 29 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Troop Support - Construction and Equipment Items of Supply Standardizat",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4820-01-493-7963, seat, valve, L-P-410 TYPE 6/ (Seawolf)"
   ],
   "files": {
    "package": "L-P-410a package.pdf",
    "scan": "L-P-410a legacy scan.pdf",
    "clean": "L-P-410a clean copy.pdf",
    "record": "L-P-410a validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "17 pages, all scanned. SHA-256 37c5b79b0551.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,864 of 5,965 items agreed. All 32 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "21 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "18 pages of searchable text, 16 tables (451 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "L-P-410a is the federal material specification for rigid polyamide (nylon) rods, tubing, bushing stock, tubular bar, flats, and molded and cast parts in nylon 6/6, nylon 6, monomer cast nylon 6 and nylon 6/10 (with an electrical grade of 6/10), furnished natural, weather resistant, wear resistant or heat stabilized, and has no drawing: it sets physical, raw material, filled-compound and electrical property limits (Tables I to IV), dimensional stability and warp limits (Tables V and VI), tolerances by nominal size only for flats by thickness, rods by diameter, tubing by OD or ID with wall, and tubular bar for all sizes (Tables VII to X), a minimum bushing stock wall of half the difference of the nominal diameters (3.12.5) and default molded part tolerances (Table XII), and it leaves the length, width, thickness, diameter and wall of every stock shape to the procuring activity (3.12.2 to 3.12.6) and the dimensions of molded and cast parts to the contract or drawing (3.3), so the one linked stock number, 4820-01-493-7963 (valve seat), takes only its material, type 6/6, from this document.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 29 August 2022. ASSIST also holds Revision A Amendment 3 (21 May 1974) and Revision A Amendment 4 (15 July 1999). They were issued after this revision and are not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-B-81934/2D",
   "slug": "mil-b-81934-2d",
   "title": "Bearing, sleeve, flanged, self-lubricating, 325\u00b0 F",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-B-81934_2D Bearing, sleeve",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 4,
   "solids": 365,
   "dimensions": 4380,
   "dimensions_met": 4380,
   "kind": "Military specification sheet",
   "dated": "5 DEC 94",
   "status": "Canceled, 2 July 1998",
   "newest": "Revision D Notice 1 - Cancellation, 2 July 1998",
   "superseding": "SAE-AS81934/2",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "3120-01-457-7893, bearing, sleeve, M81934/2-32C064 (Seawolf)"
   ],
   "files": {
    "package": "MIL-B-81934_2D package.pdf",
    "scan": "MIL-B-81934_2D legacy scan.pdf",
    "clean": "MIL-B-81934_2D clean copy.pdf",
    "record": "MIL-B-81934_2D validation record.pdf",
    "sheet": "MIL-B-81934_2D 3D model.pdf",
    "parts": "MIL-B-81934_2D parts list.pdf",
    "inspection": "MIL-B-81934_2D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/M81934_2-14_036-freecad.png",
    "pair": "Models/views/M81934_2-14_036-pair.png",
    "record": "Models/views/M81934_2-14_036-record.png",
    "front": "Models/views/M81934_2-14_036-front.png",
    "top": "Models/views/M81934_2-14_036-top.png",
    "right": "Models/views/M81934_2-14_036-right.png",
    "cut": "Models/views/M81934_2-14_036-cut.png"
   },
   "shown_part": "M81934/2-14()036",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid envelopes of the flanged self-lubricating sleeve bearing for every bore size and length code in Table II at the standard O.D., plus the .010 (T) and .020 (U) oversize O.D. repair parts of Table III for every size at one length, with the Detail A sleeve O.D. undercut at the flange face and the Detail B 15\u00b0 sleeve-end chamfer.",
   "not_modeled": [
    "The T and U oversize parts are modeled at one length per size (the middle length code in Table II), not at every length, to keep the set under 400 solids.",
    "The TFE liner is not a separate body: the liner thickness is not given, so liner and metal backing form one solid with the liner bore \u00d8B.",
    "The liner extension onto the flange (.020 max) and past the flange (.045 max), and the liner standback at the sleeve end (.010 max for length code 012 or less, .025 max otherwise) are not modeled; each is a maximum that zero meets.",
    "The .010 \u00b1.005 R corner of Detail A, the break edges and the .020 x 45\u00b0 and .015 x 45\u00b0 bore chamfers are not modeled.",
    "Material (A or C) and finish (P) codes do not change the geometry; one solid stands for each, with () in the part number for the material code.",
    "Weights, load ratings, materials, finishes, surface texture, marking and the .003 TIR concentricity tolerance are not modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, all scanned. SHA-256 d987f7d9420e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,415 of 1,457 items agreed. 29 differences went to a third reader. A second pass settled 2 from a second printing in the document, 2 from the document's record in ASSIST. 12 readings remain open.",
     "result": "12 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "1,102 checks on size series and limits. 19 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 4 tables (910 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "365 solids in STEP AP242. 4,380 of 4,380 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision D Notice 1 - Cancellation, 2 July 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table I, row 17 (-28), SLEEVE CRES: read as .196, could be .198.",
    "Open reading. Table III, row 0 (-04), 1st OVERSIZE: read as .3860, could be .3880.",
    "Open reading. Table III, row 7 (-11), 1st OVERSIZE: read as .8867, could be .8887.",
    "Open reading. Page 4, Thickness range upper limit: read as 0.0006, could be 0.0008.",
    "Open reading. Table I, All cells with 6 or 8: read as 6, could be 8.",
    "Open reading. Table I, row 10 (-14), SLEEVE CRES/AL: read as .028, could be .026.",
    "Open reading. Table I, row 7 (-10), SLEEVE CRES: read as .056, could be .058.",
    "Open reading. Table I, row 8 (-11), FLANGE AL and CRES: read as .006 / .016, could be .008 / .018.",
    "Open reading. Table I, footnote 2/: read as 1981, could be 1961.",
    "Open reading. DETAIL A, callout UNDERCUT: read as .062, could be .082.",
    "Open reading. Page 4, text: read as -65\u00b0 F, could be -85\u00b0 F.",
    "Open reading. Table I, row 15 (-24), SLEEVE AL: read as .062, could be .082.",
    "Model. Table II gives no lengths for the inactive -07A, which footnote 2/ of Table I replaces with -07; the model gives -07A the -07 lengths. An engineer must decide whether -07A bearings are made only in the -07 lengths."
   ]
  },
  {
   "id": "MIL-C-24714(SH)",
   "slug": "mil-c-24714-sh",
   "title": "Connector tubes, hydraulic component, general specification for",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-C-24714(SH) Connector tubes, hydraulic component",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 10,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "27 January 1989",
   "status": "Canceled, 15 October 2002",
   "newest": "Notice 1 - Cancellation, 15 October 2002",
   "superseding": "SAE-J24714",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4730-01-415-7424, restrictor, fluid flow, MIL-C-24714 (Seawolf)"
   ],
   "files": {
    "package": "MIL-C-24714(SH) package.pdf",
    "scan": "MIL-C-24714(SH) legacy scan.pdf",
    "clean": "MIL-C-24714(SH) clean copy.pdf",
    "record": "MIL-C-24714(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "10 pages, all scanned. SHA-256 55503a388c4e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,317 of 2,320 items agreed. All 4 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "14 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 3 tables (46 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "General specification for hydraulic valve connector tubes (ferrules, quills and transfer tubes) that sets compositions, materials, qualification and quality conformance inspection, and refers all part dimensions to the applicable specification sheet (MIL-C-24714/1).",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Notice 1 - Cancellation, 15 October 2002.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-C-24714/1(SH)",
   "slug": "mil-c-24714-1-sh",
   "title": "Connector tubes, preferred sizes, valves and subplates",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-C-24714_1(SH) Connector tubes, preferred sizes",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 50,
   "dimensions": 868,
   "dimensions_met": 862,
   "kind": "Military specification sheet",
   "dated": "27 January 1989",
   "status": "Canceled, 15 October 2002",
   "newest": "Notice 1 - Cancellation, 15 October 2002",
   "superseding": "SAE-J24714",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 8,
   "by_class": {
    "Seawolf": 8
   },
   "stock_examples": [
    "4730-01-398-3447, coupling, tube, M24714/1 (Seawolf)",
    "4730-01-398-3450, coupling, tube, M24714/1 (Seawolf)",
    "4730-01-415-7424, restrictor, fluid flow, M24714/1-013R-A (Seawolf)",
    "4730-01-424-7386, coupling, tube, M24714/1-117S-S (Seawolf)"
   ],
   "files": {
    "package": "MIL-C-24714_1(SH) package.pdf",
    "scan": "MIL-C-24714_1(SH) legacy scan.pdf",
    "clean": "MIL-C-24714_1(SH) clean copy.pdf",
    "record": "MIL-C-24714_1(SH) validation record.pdf",
    "sheet": "MIL-C-24714_1(SH) 3D model.pdf",
    "parts": "MIL-C-24714_1(SH) parts list.pdf",
    "inspection": "MIL-C-24714_1(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/M24714_1-332S-freecad.png",
    "pair": "Models/views/M24714_1-332S-pair.png",
    "record": "Models/views/M24714_1-332S-record.png",
    "front": "Models/views/M24714_1-332S-front.png",
    "top": "Models/views/M24714_1-332S-top.png",
    "right": "Models/views/M24714_1-332S-right.png",
    "cut": "Models/views/M24714_1-332S-cut.png"
   },
   "shown_part": "M24714/1-332S",
   "application": "FreeCAD 1.1.4",
   "modeled": "Revolved solids of every MIL-C-24714/1 connector tube configuration: 12 standard (S), 12 undrilled (U) and 12 plug (P) dash numbers from Table II, and 14 restrictor (R) and check valve (C) tubes from Table III.",
   "not_modeled": [
    "Composition identifiers S, A and T (Table I) set material only; one solid stands for each configuration in all three materials.",
    "The mating counterbore of Figure 4 and Table IV (A1, C1, J1) is a feature of the valve or subplate body, not of the tube.",
    "O-ring gland detail per MIL-G-5514, surface finish (63 and 20-63) and the .010 position tolerance on B1 and B2 are not modeled beyond nominal coaxial geometry.",
    "Threads 10-32UNF-2B and 6-32UNF-2B are plain holes at the major diameter."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, all scanned. SHA-256 4e892f736edb.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "756 of 827 items agreed. All 28 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "91 checks on size series and limits. 7 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 4 tables (454 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "50 solids in STEP AP242. 862 of 868 stated dimensions measure within limits; 6 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Notice 1 - Cancellation, 15 October 2002.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. For dash numbers 215, 220 and 224 in the R and C configurations, Figure 2 draws J and K end to end along the tube, and Table III gives J min 0.80 and K min 0.21, which add to 1.01, more than the 1.005 maximum length C in Table II. The engineer must decide which of the three values gives way; the solids hold J at 0.80 and K comes out at about 0.20.",
    "Model. The footnote to Figure 3 prints the thread of the 010 plug as 6-32UNF-2B, but 32 threads per inch on a No. 6 thread is the Unified coarse series (UNC) and the fine series is 6-40. The engineer must confirm which thread the 010 plug takes; the solid's plain hole at the .138 major diameter is the same for both."
   ]
  },
  {
   "id": "MIL-C-38404E",
   "slug": "mil-c-38404e",
   "title": "Couplings, hose, reattachable screw-on",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-C-38404E Couplings, hose",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "16 October 1992",
   "status": "Canceled, 26 April 2000",
   "newest": "Revision E Notice 2 - Cancellation, 26 April 2000",
   "superseding": "SAE-AS38404",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4730-01-423-8771, coupling, hose, M38404-1-2-B (Seawolf)"
   ],
   "files": {
    "package": "MIL-C-38404E package.pdf",
    "scan": "MIL-C-38404E legacy scan.pdf",
    "clean": "MIL-C-38404E clean copy.pdf",
    "record": "MIL-C-38404E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, all scanned. SHA-256 c961f7e7d7cf.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,896 of 2,907 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "15 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 2 tables (27 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-C-38404E is the detail specification for screw-on reattachable couplings for hose conforming to MIL-H-6615 or MIL-H-26521 and has no dimensioned drawing: it sets the classes (fuel or demineralized water service), the types (external NPT or swiveling internal NPSH coupling end), materials, six sizes from 1.25 to 4 inch with size codes A to F and their working and test pressures (Table I), body, grip and sleeve rules given only as proportions, counts and angles (tailpiece outer wall at least 75 percent and inner wall at least 30 percent of the hose thickness, inner wall at least 175 percent as long as the outer wall, 14 threads per inch with at least 6, 13 or 19 complete threads, a 45 to 50 degree tailpiece taper, a 50 to 65 degree sleeve taper, a grip coil of about three loops and four wrench flats) and pressure, swivel, hose retention and environmental tests, while Figures 1 to 3 are sections with feature callouts only, so it gives no diameter or length of the body, grip or sleeve for any size and no thickness for the hose its proportions refer to.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 2 - Cancellation, 26 April 2000.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-C-85049/6A",
   "slug": "mil-c-85049-6a",
   "title": "Connector accessories, electrical, backshell, environmental, cable sealing, 45\u00b0, shield termination, category 1A (for MIL-C-5015 crimp, MIL-C-26482 series 2, MIL-C-81703 series 3, and MIL-C-83723 series III connectors)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-C-85049_6A Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 13,
   "solids": 300,
   "dimensions": 3036,
   "dimensions_met": 3036,
   "kind": "Military specification sheet",
   "dated": "30 November 1990",
   "status": "Canceled, 19 June 2003",
   "newest": "Revision A Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/6",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 2,
   "by_class": {
    "Seawolf": 2
   },
   "stock_examples": [
    "5935-01-518-3877, backshell, electrical connector, M85049/6-13S (Seawolf)",
    "5935-01-518-3880, backshell, electrical connector, M85049/6-17S (Seawolf)"
   ],
   "files": {
    "package": "MIL-C-85049_6A package.pdf",
    "scan": "MIL-C-85049_6A legacy scan.pdf",
    "clean": "MIL-C-85049_6A clean copy.pdf",
    "record": "MIL-C-85049_6A validation record.pdf",
    "sheet": "MIL-C-85049_6A 3D model.pdf",
    "parts": "MIL-C-85049_6A parts list.pdf",
    "inspection": "MIL-C-85049_6A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85049_6-52W-freecad.png",
    "pair": "Models/views/M85049_6-52W-pair.png",
    "record": "Models/views/M85049_6-52W-record.png",
    "front": "Models/views/M85049_6-52W-front.png",
    "top": "Models/views/M85049_6-52W-top.png",
    "right": "Models/views/M85049_6-52W-right.png",
    "cut": "Models/views/M85049_6-52W-cut.png"
   },
   "shown_part": "M85049/6-52W",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of all 300 MIL-C-85049/6A part numbers (dash numbers 1 to 75, Style 1 and Style 2, each in finishes N, W, B and S): coupling nut, Style 2 adapter transition, body tube with a 45 degree bend, V thread leg, loosely assembled clamp envelope and wire passage, sized to Table I.",
   "not_modeled": [
    "The connector interface and coupling thread inside the coupling nut, which requirement 1b places in MIL-C-85049 figure 4.",
    "The clamp's own parts (MIL-C-85049/42): saddle bars, screws, lugs and its grip down to the A minimum bundle.",
    "The sleeve, O-ring, ferrules, adapter rear, grommet and grommet follower as separate parts, and the coupling nut captive and free to rotate on the follower: each part number is one solid.",
    "The .020 safety wire holes, the boss and its alternate location, knurling and marking."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "13 pages, all scanned. SHA-256 aeaa9a2bd92c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "662 of 1,600 items agreed. All 37 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "935 checks on size series and limits. 30 breaks checked against the scan: all are as printed. A later review settled 3 printed values from the document's own conversions.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 7 tables (1,752 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "300 solids in STEP AP242. 3,036 of 3,036 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 1 - Cancellation, 19 June 2003.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 letters the largest Style 2 diameter E and draws G MAX as a length, but Table I heads G as a diameter, and each Style 2 E is .748 to .750 more than the E of the Style 1 row with the same B, C, V and clamp size whose D equals that G (dash 2 and 49 against 7, 50 against 52, 51 and 72 against 57, 55, 58 and 73 against 61 and 71 against 40), so the solids take E as the offset to the bend and G as the adapter diameter; an engineer must confirm.",
    "Model. Dash 18 prints V as 1.750-10 UNS, dash 28 as 2.500-18 UN and dash 32 as 1.437-18 UNEF, where the other rows with the same clamp size print 1.750-18 UNS, 2.500-16 UN and 1.4375-18 UNEF respectively; the solids carry each thread as a plain cylinder at its printed major diameter, and an engineer must settle which thread these rows take.",
    "Model. Dash 55 prints H max 6.48 and F max 6.14, so its coupling nut, taken as H max minus F max, is .34 long, where dash 15, 16, 43 and 54 with the same D of 1.345 give .37."
   ]
  },
  {
   "id": "MIL-C-85049/8A",
   "slug": "mil-c-85049-8a",
   "title": "Connector accessories, electrical, backshell, environmental, cable sealing, 90\u00b0, shield termination, category 1A (for MIL-C-5015 crimp, MIL-C-26482 series 2, MIL-C-81703 series 3, and MIL-C-83723 series III connectors)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-C-85049_8A Connector accessories, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 13,
   "solids": 75,
   "dimensions": 834,
   "dimensions_met": 834,
   "kind": "Military specification sheet",
   "dated": "30 November 1990",
   "status": "Canceled, 19 June 2003",
   "newest": "Revision A Notice 1 - Cancellation, 19 June 2003",
   "superseding": "SAE-AS85049/8",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5935-01-518-3883, backshell, electrical connector, M85049/8-13S (Seawolf)"
   ],
   "files": {
    "package": "MIL-C-85049_8A package.pdf",
    "scan": "MIL-C-85049_8A legacy scan.pdf",
    "clean": "MIL-C-85049_8A clean copy.pdf",
    "record": "MIL-C-85049_8A validation record.pdf",
    "sheet": "MIL-C-85049_8A 3D model.pdf",
    "parts": "MIL-C-85049_8A parts list.pdf",
    "inspection": "MIL-C-85049_8A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85049_8-37-freecad.png",
    "pair": "Models/views/M85049_8-37-pair.png",
    "record": "Models/views/M85049_8-37-record.png",
    "front": "Models/views/M85049_8-37-front.png",
    "top": "Models/views/M85049_8-37-top.png",
    "right": "Models/views/M85049_8-37-right.png",
    "cut": "Models/views/M85049_8-37-cut.png"
   },
   "shown_part": "M85049/8-37",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 75 MIL-C-85049/8A 90 degree backshells (Style 1 and Style 2): coupling nut, elbow body, cable leg, rear adapter and clamp envelope and wire passage, sized to Table I.",
   "not_modeled": [
    "The coupling nut interface and internal thread (MIL-C-85049 figure 4), the ferrules, O-rings, grommet and grommet follower.",
    "Clamp details (MIL-C-85049/42) and the clamp's grip on the smallest bundle, A min; the .020 safety wire holes and the marking.",
    "The coupling nut is one solid with the body; on the part it is captive and free to turn (requirement 1c).",
    "Finish codes N, W, B and S (Table II), which do not change geometry; one solid per dash number."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "13 pages, all scanned. SHA-256 85befa220cd2.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,245 of 1,632 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "853 checks on size series and limits. 28 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 7 tables (1,672 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "75 solids in STEP AP242. 834 of 834 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 1 - Cancellation, 19 June 2003.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Dash number 48 (MIL-C-5015 shell 40) prints E 1.816, the E of every shell 36 size, beside F 3.88 and H 4.43, the values of the shell 40 sizes whose E is 2.566 (dash numbers 29, 30 and 65), so its far side lies 2.064 beyond the cable leg axis, against 1.314 to 1.574 on every other shell 36 to 48 size. The engineer must decide whether E or F and H are right for dash number 48; the solid uses the printed values."
   ]
  },
  {
   "id": "MIL-DTL-15024G",
   "slug": "mil-dtl-15024g",
   "title": "Plates and tags for identification of equipment, general specification for",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-15024G Plates and tags for identification of equipment",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 15,
   "solids": 16,
   "dimensions": 154,
   "dimensions_met": 154,
   "kind": "Detail specification",
   "dated": "3 March 2018",
   "status": "Active, 27 December 2022",
   "newest": "Revision G Notice 1 - Validation, 27 December 2022",
   "superseding": "",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5998-01-516-9384, circuit card assembly, MIL-P-15024 TY F (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-15024G package.pdf",
    "scan": "MIL-DTL-15024G legacy scan.pdf",
    "clean": "MIL-DTL-15024G clean copy.pdf",
    "record": "MIL-DTL-15024G validation record.pdf",
    "sheet": "MIL-DTL-15024G 3D model.pdf",
    "parts": "MIL-DTL-15024G parts list.pdf",
    "inspection": "MIL-DTL-15024G inspection report.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {
    "iso": "Models/views/MIL-DTL-15024_size_10-freecad.png",
    "pair": "Models/views/MIL-DTL-15024_size_10-pair.png",
    "record": "Models/views/MIL-DTL-15024_size_10-record.png",
    "front": "Models/views/MIL-DTL-15024_size_10-front.png",
    "top": "Models/views/MIL-DTL-15024_size_10-top.png",
    "right": "Models/views/MIL-DTL-15024_size_10-right.png",
    "cut": "Models/views/MIL-DTL-15024_size_10-cut.png"
   },
   "shown_part": "MIL-DTL-15024 size 10",
   "application": "FreeCAD 1.1.4",
   "modeled": "Flat rectangular identification plates for the 16 label sizes of table II (size 1, 2 x 3/4, to size 25, 7 x 7), each of the table length and width, 0.03 inch thick, with the table's two or four round mounting holes at the hole center to edge distance and spacing.",
   "not_modeled": [
    "The 'Other' size row of table II, whose dimensions are as approved by the acquiring activity.",
    "Plates without mounting holes: holes are used only when the acquiring activity specifies them (table II, note 3), and adhesive-mounted plates have none (3.4.4); such a plate is the same solid without its holes.",
    "Thickness for types other than A, B, C, E and J: type H plates may be 0.02 inch (3.5.8.3), type L plates 0.005 to 0.0625 inch (3.5.10.3), type D thickness is set by the contract or the manufacturer's standard (3.5.4.3), and types F and G carry no thickness requirement.",
    "Marking: etched, engraved, stamped or raised characters and their depths (3.5.1.3, 3.5.2.3, 3.5.3.3, 3.5.4.3), character heights (3.3.4), fillings, coatings, color styles (table I) and finishes.",
    "Type J tags whose length and width are governed by the data to be marked (3.5.9.3), and plate sizes set by a specification sheet or contract (3.4.4)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, 0 scanned. SHA-256 bb5c70238d72.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,166 of 4,184 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "103 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 4 tables (405 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "16 solids in STEP AP242. 154 of 154 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Notice 1 - Validation, 27 December 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table II gives no tolerance for any dimension (note 2 leaves tolerances to the acquiring activity), so the solids are checked against the printed values only.",
    "Model. Table II does not say where the two holes of sizes 1, 4 and 7 sit across the width; the solids put them on the width centerline."
   ]
  },
  {
   "id": "MIL-DTL-19772C(SH)",
   "slug": "mil-dtl-19772c-sh",
   "title": "Valves, temperature regulating, automatic, naval shipboard",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-19772C(SH) Valves, temperature regulating",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 20,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "03 October 2017",
   "status": "Active, 27 March 2024",
   "newest": "Revision C Notice 1 - Validation, 27 March 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-19772C(SH) package.pdf",
    "scan": "MIL-DTL-19772C(SH) legacy scan.pdf",
    "clean": "MIL-DTL-19772C(SH) clean copy.pdf",
    "record": "MIL-DTL-19772C(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "20 pages, 0 scanned. SHA-256 76f2fbcb7576.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "7,392 of 7,525 items agreed. All 38 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "162 checks on size series and limits. 6 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "21 pages of searchable text, 15 tables (351 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-19772 is a detail specification for self-operated automatic temperature regulating valves for naval shipboard service that defines types, classes and series, materials, pressure-temperature ratings, end connections by reference to MIL-PRF-20042, MIL-DTL-1183, ASME B16.5 and Drawing 810-1385861, control accuracy, flow capacity and tests, and gives only end-to-end length and maximum height and width envelope limits for type III, class 1, series 100 valves in sizes 1 to 2 inches in table V, with no drawing, leaving valve shape to the manufacturer.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 1 - Validation, 27 March 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24135C(SH) w/AMENDMENT 1",
   "slug": "mil-dtl-24135c-sh-w-amendment-1",
   "title": "Hose, synthetic rubber, wire reinforced, for flexible hose assemblies, general specification for",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-24135C(SH) w_AMENDMENT 1 Hose, synthetic rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 15,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "14 July 2026",
   "status": "Active, 14 July 2026",
   "newest": "Revision C Amendment 1 (amendment incorporated), 14 July 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4730-01-455-2326, elbow, hose, MIL-H-24135 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24135C(SH) w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-24135C(SH) w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-24135C(SH) w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-24135C(SH) w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, 0 scanned. SHA-256 d47e5d2988f3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,630 of 5,635 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "15 pages of searchable text, 4 tables (42 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24135C(SH) w/Amendment 1 is a general specification for wire-reinforced synthetic rubber hose and hose assemblies that sets construction, materials, marking, pressure, impulse and stability tests, sampling and a part-number scheme, and sends hose dimensions to the individual specification sheets (3.4.3); its only dimensional values are the Table I concentricity limits by size range, and Figures 1 to 3 are impulse-test pressure-time curves, not part drawings.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Amendment 1 (amendment incorporated), 14 July 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24135/2B(SH)",
   "slug": "mil-dtl-24135-2b-sh",
   "title": "Hose, synthetic rubber, wire reinforced (four-ply spiral-wrapped or double-spiral and single-wire braid), for flexible hose assemblies (high pressure, sizes -6 through -16)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-24135_2B(SH) Hose, synthetic rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "24 September 2020",
   "status": "Active, 23 July 2025",
   "newest": "Revision B Notice 1 - Validation, 23 July 2025",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 7,
   "by_class": {
    "Seawolf": 7
   },
   "stock_examples": [
    "4720-01-451-8968, hose assembly, nonmetallic, MIL-DTL-24135/2 (Seawolf)",
    "4720-01-451-9009, hose assembly, nonmetallic, MIL-DTL-24135/2 (Seawolf)",
    "4720-01-451-9048, hose assembly, nonmetallic, MIL-DTL-24135/2 (Seawolf)",
    "4720-01-451-9055, hose assembly, nonmetallic, MIL-DTL-24135/2 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24135_2B(SH) package.pdf",
    "scan": "MIL-DTL-24135_2B(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24135_2B(SH) clean copy.pdf",
    "record": "MIL-DTL-24135_2B(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 0657f94312e3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,026 of 2,036 items agreed. All 4 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "40 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 6 tables (203 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24135/2B(SH) is a specification sheet for high-pressure wire-reinforced synthetic rubber hose, ordered in bulk by the linear foot, that gives for each dash size -6 to -16 only the tube inside diameter, reinforcement outside diameter and cover outside diameter limits and the minimum bend radius (Table I) and the working, burst and impulse pressures and approximate weight per foot (Table II), with no drawing, no length and no end fitting shape, the fittings being MIL-DTL-24787 parts.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 23 July 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24231/4E(SH) w/AMENDMENT 1",
   "slug": "mil-dtl-24231-4e-sh-w-amendment-1",
   "title": "Connector, plug, type I, molded, 14-, 24-, 30-, or 40-CONDUCTOR (straight and 90 degrees)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-24231_4E(SH) w_AMENDMENT 1 Connector, plug",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 15,
   "solids": 5,
   "dimensions": 66,
   "dimensions_met": 66,
   "kind": "Detail specification sheet",
   "dated": "13 May 2024",
   "status": "Active, 13 May 2024",
   "newest": "Revision E Amendment 1 (amendment incorporated), 13 May 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5935-01-537-5510, connector, plug, electrical, M24231/4-007 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24231_4E(SH) w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-24231_4E(SH) w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-24231_4E(SH) w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-24231_4E(SH) w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-24231_4E(SH) w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-24231_4E(SH) w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-24231_4E(SH) w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/MIL-DTL-24231_4_sealing_plug_item_15_-freecad.png",
    "pair": "Models/views/MIL-DTL-24231_4_sealing_plug_item_15_-pair.png",
    "record": "Models/views/MIL-DTL-24231_4_sealing_plug_item_15_-record.png",
    "front": "Models/views/MIL-DTL-24231_4_sealing_plug_item_15_-front.png",
    "top": "Models/views/MIL-DTL-24231_4_sealing_plug_item_15_-top.png",
    "right": "Models/views/MIL-DTL-24231_4_sealing_plug_item_15_-right.png",
    "cut": "Models/views/MIL-DTL-24231_4_sealing_plug_item_15_-cut.png"
   },
   "shown_part": "MIL-DTL-24231/4 sealing plug (item 15)",
   "application": "FreeCAD 1.1.4",
   "modeled": "Five solids of the parts the figures dimension: the coupling M24231/4-011, the protective cap M24231/4-012, the sealing plug (item 15), the plug sleeve M24231/4-010 and the insulating disk M24231/4-021.",
   "not_modeled": [
    "The molded plug assemblies M24231/4-001 to -009 (figures 1 to 4, 10 and 11): the molding is dimensioned only by its outside diameter and a few lengths, its cable end follows the cable ordered, and the inserts (items 18 to 21) are defined in MIL-DTL-24231/29.",
    "The sealing plug assembly M24231/4-020 (figure 9) and its SAE-AS28775-329 O-ring.",
    "The thread form of the 2.750-12UN threads.",
    "Corner and edge radii: 3/32R, 1/64R and 1/16R on the coupling, the 1/16R corners of the sealing plug's O-ring groove, and 1/32R, 1/16R and round all edges on the plug sleeve.",
    "The 1/16 by 30 degree edge at the mouth of the sealing plug's \u00d81.642 cavity.",
    "Surface finish (125 and 32), the plasma-sprayed coating of requirement 4, the drilling or slotting of the sleeve that requirement 3 allows, and the mold marking.",
    "The contact arrangements and key positions of the inserts in figures 2 to 4 and 10."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, 6 scanned. SHA-256 5d4902b097de.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "676 of 695 items agreed. All 19 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "157 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 1 table (299 cells), 11 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "5 solids in STEP AP242. 66 of 66 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 1 (amendment incorporated), 13 May 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 6 gives the width of the protective cap's slot (1/8) but not its depth; the solid takes 1/8, level with the end of the undercut as drawn."
   ]
  },
  {
   "id": "MIL-DTL-24487B(SH)",
   "slug": "mil-dtl-24487b-sh",
   "title": "Tile, rubber vibration damping, type V",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-24487B(SH) Tile, rubber vibration damping",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 16,
   "solids": 2,
   "dimensions": 30,
   "dimensions_met": 30,
   "kind": "Detail specification",
   "dated": "28 January 2005",
   "status": "Active, 29 December 2020",
   "newest": "Revision B Notice 1 - Validation, 29 December 2020",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "9320-01-580-4929, tile, damping, MIL-T-24487 TYV CL1 12X12X0.75 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24487B(SH) package.pdf",
    "scan": "MIL-DTL-24487B(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24487B(SH) clean copy.pdf",
    "record": "MIL-DTL-24487B(SH) validation record.pdf",
    "sheet": "MIL-DTL-24487B(SH) 3D model.pdf",
    "parts": "MIL-DTL-24487B(SH) parts list.pdf",
    "inspection": "MIL-DTL-24487B(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 14",
   "pictures": {
    "iso": "Models/views/M24487-2-freecad.png",
    "pair": "Models/views/M24487-2-pair.png",
    "record": "Models/views/M24487-2-record.png",
    "front": "Models/views/M24487-2-front.png",
    "top": "Models/views/M24487-2-top.png",
    "right": "Models/views/M24487-2-right.png",
    "cut": "Models/views/M24487-2-cut.png"
   },
   "shown_part": "M24487-2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Two square rubber damping tiles, M24487-1 (Class 1) and M24487-2 (Class 2), each with one smooth face and one face cut by two sets of trapezoidal cross grooves to the Figure 1 dimensions.",
   "not_modeled": [
    "The abraded bonding faces of 3.3, the identification marking and the class color paint on two edges of 3.8.",
    "Tiles ordered at a plan size other than 11.875 in, which 3.4 allows with the same \u00b1 0.0625 in tolerance.",
    "Weight (3.5), rubber properties (Table I) and vibration damping (Tables II and III), which depend on the compound."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "16 pages, 0 scanned. SHA-256 a7a6005ccc5f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "6,365 of 6,387 items agreed. All 15 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "30 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "16 pages of searchable text, 9 tables (251 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 30 of 30 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 29 December 2020.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. At the Figure 1 nominal dimensions, with the 10\u00b0 angle on each groove wall, the Class 1 tile holds 94.8 cubic inches, which at the 1.50 specific gravity of the Table VIII suggested formulation weighs 5.24 lb/ft\u00b2, outside the 5.0 \u00b1 0.2 lb/ft\u00b2 of 3.5; the compound density or the groove dimensions must be chosen to meet the weight."
   ]
  },
  {
   "id": "MIL-DTL-24560/13D(SH)",
   "slug": "mil-dtl-24560-13d-sh",
   "title": "Lights, navigation, submarine, clear, clear (masked), red and green, 120 volts, 50 watts, one lamp, symbols 174.4, 174.5, 188.3, and 189.3",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-24560_13D(SH) Lights, navigation",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "5 February 1999",
   "status": "Active, 26 February 2021",
   "newest": "Revision D Notice 1 - Validation, 26 February 2021",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "6220-01-388-7187, light, navigational, marine, M24560/13-002 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24560_13D(SH) package.pdf",
    "scan": "MIL-DTL-24560_13D(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24560_13D(SH) clean copy.pdf",
    "record": "MIL-DTL-24560_13D(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 2 scanned. SHA-256 79d28517b595.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "414 of 442 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "21 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 1 table (110 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "This sheet defines the submarine navigation light assembly M24560/13-001 to -004 by a parts list, an undimensioned half-section assembly drawing and a wiring diagram, with electrical, enclosure, weight and test requirements, and gives no dimensions for any part.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 26 February 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24624A(SH)",
   "slug": "mil-dtl-24624a-sh",
   "title": "Valves, quarter turn, butterfly, high performance (double-offset) wafer and lug style, class 150, for shipboard use",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-24624A(SH) Valves, quarter turn",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 15,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "12 November 2019",
   "status": "Active, 19 November 2024",
   "newest": "Revision A Notice 1 - Validation, 19 November 2024",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 6,
   "by_class": {
    "Seawolf": 6
   },
   "stock_examples": [
    "4820-01-414-8047, valve, butterfly, MIL-DTL-24624 (Seawolf)",
    "4820-01-414-8052, valve, butterfly, MIL-DTL-24624 (Seawolf)",
    "4820-01-415-2598, valve, butterfly, MIL-DTL-24624 (Seawolf)",
    "4820-01-415-4384, valve, butterfly, M24624 STYB TYIII 5IN (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24624A(SH) package.pdf",
    "scan": "MIL-DTL-24624A(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24624A(SH) clean copy.pdf",
    "record": "MIL-DTL-24624A(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, 0 scanned. SHA-256 9bc32b0416da.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,780 of 5,785 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "76 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "15 pages of searchable text, 5 tables (160 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24624 is a detail specification for class 150 double-offset wafer and lug style butterfly valves that defines materials, design rules, flow capacity, handwheel force and qualification tests, and gives only the face-to-face length for each size in table II, leaving body and flange dimensions to ASME B16.34, ASME B16.5 and Drawing 803-1385892.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 19 November 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24694A(SH) w/AMENDMENT 1",
   "slug": "mil-dtl-24694a-sh-w-amendment-1",
   "title": "Valve, hydraulic relief, 1.5 - 35 bars (22 - 500 pounds per square inch) cartridge type, general specification for",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-24694A(SH) w_AMENDMENT 1 Valve, hydraulic relief",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 11,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "18 January 2022",
   "status": "Active, 18 March 2026",
   "newest": "Revision A Notice 2 - Validation, 18 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-24694A(SH) w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-24694A(SH) w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-24694A(SH) w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-24694A(SH) w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "11 pages, 0 scanned. SHA-256 401e0fa3b2f9.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,544 of 4,574 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "10 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 2 tables (51 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24694 is a general specification for cartridge-type hydraulic relief valves up to 35 bars (500 lb/in2) that defines materials, performance limits from a differential-pressure chart, and qualification and vibration tests, and leaves all overall dimensions to the applicable specification sheet.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 2 - Validation, 18 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24694/1A(SH)",
   "slug": "mil-dtl-24694-1a-sh",
   "title": "Valve, hydraulic relief, 1.5 \u2013 35 bar, 150 lpm cartridge type",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-24694_1A(SH) Valve, hydraulic relief",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 90,
   "dimensions": 1260,
   "dimensions_met": 1260,
   "kind": "Detail specification sheet",
   "dated": "8 June 2016",
   "status": "Active, 17 March 2026",
   "newest": "Revision A Notice 2 - Validation, 17 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4820-01-429-8415, valve, safety relief, M24694/1-H-IN (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24694_1A(SH) package.pdf",
    "scan": "MIL-DTL-24694_1A(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24694_1A(SH) clean copy.pdf",
    "record": "MIL-DTL-24694_1A(SH) validation record.pdf",
    "sheet": "MIL-DTL-24694_1A(SH) 3D model.pdf",
    "parts": "MIL-DTL-24694_1A(SH) parts list.pdf",
    "inspection": "MIL-DTL-24694_1A(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M24694_1-CE-EX-freecad.png",
    "pair": "Models/views/M24694_1-CE-EX-pair.png",
    "record": "Models/views/M24694_1-CE-EX-record.png",
    "front": "Models/views/M24694_1-CE-EX-front.png",
    "top": "Models/views/M24694_1-CE-EX-top.png",
    "right": "Models/views/M24694_1-CE-EX-right.png",
    "cut": "Models/views/M24694_1-CE-EX-cut.png"
   },
   "shown_part": "M24694/1-CE-EX",
   "application": "FreeCAD 1.1.4",
   "modeled": "90 envelope solids, one per part number (each pressure class of Table I or minimum-to-maximum class pair, with internal or external adjustment from Table II), of the Figure 1 cartridge valve: pilot land with the -222 gland groove, neck, AS4395 E 28 thread, 2.500 hex stock and adjuster body; the class letters do not change the shape, so the solids take two shapes, 6.500 long with internal adjustment and 7.500 long with external adjustment.",
   "not_modeled": [
    "The thread form and the thread relief and -928 O-ring groove at the hex face, which SAE AS4395 E 28 defines and this sheet does not dimension.",
    "The gland groove depth and corner radii, which SAE AS4716 (or MIL-G-5514 for previously qualified designs) defines.",
    "The -222 and -928 O-rings.",
    "The inlet bore, the side outlet ports the flow arrows show, and the poppet, spring and adjuster inside the valve, which the figure does not dimension; each solid is solid metal inside its outline.",
    "The thread chamfer, hex corner chamfers and the joint line on the adjuster body that the figure draws without sizes, and the 0.005 minimum edge break of requirement 2.",
    "The pressure classes, reseat leakage, rated flow, surface roughness and material, which are performance and process requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, 0 scanned. SHA-256 e5590dfae25a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "326 of 337 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 2 tables (31 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "90 solids in STEP AP242. 1,260 of 1,260 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 2 - Validation, 17 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24704C(SH)",
   "slug": "mil-dtl-24704c-sh",
   "title": "Flanges, four-bolt, square, for hydraulic systems, general specification for",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-24704C(SH) Flanges, four-bolt",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 10,
   "solids": 8,
   "dimensions": 120,
   "dimensions_met": 120,
   "kind": "Detail specification",
   "dated": "31 July 2019",
   "status": "Active, 30 November 2023",
   "newest": "Revision C Notice 1 - Validation, 30 November 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4730-01-433-2675, flange, pipe, MIL-F-24704 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24704C(SH) package.pdf",
    "scan": "MIL-DTL-24704C(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24704C(SH) clean copy.pdf",
    "record": "MIL-DTL-24704C(SH) validation record.pdf",
    "sheet": "MIL-DTL-24704C(SH) 3D model.pdf",
    "parts": "MIL-DTL-24704C(SH) parts list.pdf",
    "inspection": "MIL-DTL-24704C(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure A-1, page 7",
   "pictures": {
    "iso": "Models/views/MIL-DTL-24704_cavity_E-freecad.png",
    "pair": "Models/views/MIL-DTL-24704_cavity_E-pair.png",
    "record": "Models/views/MIL-DTL-24704_cavity_E-record.png",
    "front": "Models/views/MIL-DTL-24704_cavity_E-front.png",
    "top": "Models/views/MIL-DTL-24704_cavity_E-top.png",
    "right": "Models/views/MIL-DTL-24704_cavity_E-right.png",
    "cut": "Models/views/MIL-DTL-24704_cavity_E-cut.png"
   },
   "shown_part": "MIL-DTL-24704 cavity E",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid per flange code A to H: the Figure A-1 port cavity (O-ring counterbore \u00d8A to depth D, sleeve counterbore \u00d8B to depth C, bore \u00d8G, corner radii KR and 0.005R, four tapped bolt holes H on the E/F square) cut into a square pad the size of the mating flange.",
   "not_modeled": [
    "Thread form and pitch of the tapped holes, the helical or thin-wall inserts of A.3.1.2, and the drill point.",
    "The J projected tolerance zone height, which bounds the bolt hole position zone above face A and is not a surface.",
    "Surface finish (63 on the \u00d8A floor and wall, 125 microinch elsewhere by note 1).",
    "The body around the cavity beyond the pad, which the document does not dimension.",
    "The O-ring (AS3209) and sleeve (MIL-DTL-24704/5) of Figure A-2 and the flange itself, which the slash sheets define."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "10 pages, 1 scanned. SHA-256 0688ae165210.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,207 of 2,291 items agreed. All 21 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "91 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 4 tables (179 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "8 solids in STEP AP242. 120 of 120 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 1 - Validation, 30 November 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-24704/1C(SH)",
   "slug": "mil-dtl-24704-1c-sh",
   "title": "Flanges, four-bolt, square, socket weld, for hydraulic systems",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-24704_1C(SH) Flanges, four-bolt",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 18,
   "solids": 130,
   "dimensions": 2941,
   "dimensions_met": 2941,
   "kind": "Detail specification sheet",
   "dated": "31 July 2019",
   "status": "Active, 1 December 2023",
   "newest": "Revision C Notice 1 - Validation, 1 December 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4730-01-433-2675, flange, pipe, M24704/1LD04CW (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24704_1C(SH) package.pdf",
    "scan": "MIL-DTL-24704_1C(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24704_1C(SH) clean copy.pdf",
    "record": "MIL-DTL-24704_1C(SH) validation record.pdf",
    "sheet": "MIL-DTL-24704_1C(SH) 3D model.pdf",
    "parts": "MIL-DTL-24704_1C(SH) parts list.pdf",
    "inspection": "MIL-DTL-24704_1C(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/M24704_1TB02_W-freecad.png",
    "pair": "Models/views/M24704_1TB02_W-pair.png",
    "record": "Models/views/M24704_1TB02_W-record.png",
    "front": "Models/views/M24704_1TB02_W-front.png",
    "top": "Models/views/M24704_1TB02_W-top.png",
    "right": "Models/views/M24704_1TB02_W-right.png",
    "cut": "Models/views/M24704_1TB02_W-cut.png"
   },
   "shown_part": "M24704/1TB02()W",
   "application": "FreeCAD 1.1.4",
   "modeled": "130 solids of the four-bolt square socket-weld flange, one for every flange style (S, L, T, R), flange size and pipe or tube size of figures 1 to 4 without a vent (W) and with each vent position that figures 5 and 6 allow (X on straight pipe flanges F and G; X, Y and Z on right-angle pipe flanges D to G): square body with four bolt holes, pilot, hub or boss, socket, bore, face cone or face port, counterbores on the straight flanges, and the vent thread boss and hole.",
   "not_modeled": [
    "Material codes C, L and N (table IV) do not change the geometry; one solid stands for all three, with () in the part number for the material code.",
    "The 0.20R fillet between hub or boss and square, the 0.015R socket bottom corner, the 0.020R counterbore corner, the 0.003R maximum corners at the pilot and the 0.005 to 0.015 edge breaks of note 1c; all edges are sharp.",
    "The SAE J1926-1 port detail of the vent thread boss: thread form, spot face, O-ring chamfer, thread relief and drill point.",
    "Geometric tolerances (position, runout, perpendicularity, flatness) and surface roughness (63 and 125 microinch)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, 0 scanned. SHA-256 cf5b75ce010f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,848 of 2,902 items agreed. All 20 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1,712 checks on size series and limits. 110 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 14 tables (1,964 cells), 6 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "130 solids in STEP AP242. 2,941 of 2,941 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 1 - Validation, 1 December 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Figure 1, column 'U': 0.658 then 0.657. Page 3/page 4 prints U = 0.658 for every flange size D row and 0.657 for every flange size E row, as agreed. The table pairs U with flange size, and the 0.001 step down from D to E, where T stays 0.811 for both, looks like a rounding inconsistency in the printed value; a point for an engineer.",
    "Printed value to confirm. Figure 3, column 'U': 0.658 then 0.657. Page 9/page 10 prints U = 0.658 for every flange size D row and 0.657 for every flange size E row, as agreed. The table pairs U with flange size, and the 0.001 step down from D to E, where T stays 0.811 for both, looks like a rounding inconsistency in the printed value; a point for an engineer.",
    "Model. Figure 1 prints S = 15.0 degrees for pipe flange B01 (M24704/1SB01) but V as '-', so the cone at the pilot face is not defined; the model has a plain \u00d8P bore."
   ]
  },
  {
   "id": "MIL-DTL-24705/1B(SH)",
   "slug": "mil-dtl-24705-1b-sh",
   "title": "Penetrators, multiple cable, electric cable, rectangular metal frame, square-faced blocks",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-24705_1B(SH) Penetrators, multiple cable",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 18,
   "solids": 197,
   "dimensions": 1191,
   "dimensions_met": 1187,
   "kind": "Detail specification sheet",
   "dated": "23 August 2010",
   "status": "Active, 24 June 2020",
   "newest": "Revision B Notice 1 - Validation, 24 June 2020",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5975-01-514-5539, protector, electrical cable, M24705/1-BN6055 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24705_1B(SH) package.pdf",
    "scan": "MIL-DTL-24705_1B(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24705_1B(SH) clean copy.pdf",
    "record": "MIL-DTL-24705_1B(SH) validation record.pdf",
    "sheet": "MIL-DTL-24705_1B(SH) 3D model.pdf",
    "parts": "MIL-DTL-24705_1B(SH) parts list.pdf",
    "inspection": "MIL-DTL-24705_1B(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M24705_1-FC2-freecad.png",
    "pair": "Models/views/M24705_1-FC2-pair.png",
    "record": "Models/views/M24705_1-FC2-record.png",
    "front": "Models/views/M24705_1-FC2-front.png",
    "top": "Models/views/M24705_1-FC2-top.png",
    "right": "Models/views/M24705_1-FC2-right.png",
    "cut": "Models/views/M24705_1-FC2-cut.png"
   },
   "shown_part": "M24705/1-FC2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Every PIN on the sheet as a solid: the 12 rectangular frames of table I, envelopes of the 6 end-packing assemblies, the 4 compression plates, the 8 stay plates, the 145 two-piece cable insert blocks of tables II and III, the 9 blanking insert blocks of table IV with their 9 rounded-corner (RC) versions, and the 4 filler inserts of table V.",
   "not_modeled": [
    "The frame hardware: the 3/4-10 UNC-2A hex head compression bolt, 63.5 long, and the steel thread inserts of the aluminum frames.",
    "End-packing hardware: the end-packing plates, the 3/8-16 bolts (82.55 long), nuts and welded studs of styles 1A and 1B, and the 5/16-18 bolts (76.2 long), nuts, front plate, 6.0 x 38.0 dowel pins and their 6.1 holes of style 2A; the slot for the style 1B packing material.",
    "The shape of the style 2A compression plate beyond its plan outline, 16.5 and 12.5: the flat of the raised center, the raised tab at its back edge and the recess in its lower face; the means of restraint the figure 6 note requires.",
    "Stay plate rivets and rivet holes (8 per plate), the rounded ends of the style 1 bars, the two holes in the style 2 plate, and the short straight ends of the style 1 web edges.",
    "The split of the two-piece cable insert blocks, their color dots and removable layers, and the slits between filler units.",
    "Identification marking, materials, the design performance requirements and the test specimen of figure 13."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, 0 scanned. SHA-256 288dac943dc5.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,713 of 2,794 items agreed. All 14 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "17 pages of searchable text, 5 tables (940 cells), 13 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "197 solids in STEP AP242. 1,187 of 1,191 stated dimensions measure within limits; 4 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 24 June 2020.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 8 dimensions the style 1 stay plate's lower bar as (0.593) 15.06 on the right and (0.94) 23.9 on the left between the same extension lines; 23.9 may be meant to locate the start of the web's slanted edge, which is otherwise undimensioned.",
    "Model. Figure 8 does not dimension the upper bar of the style 1 stay plate; 91.2 - 62.0 - 15.06 leaves 14.14, while the figure draws both bars alike.",
    "Model. Figure 6 gives a 110.0 crown radius that cannot span the 127.0 width with only a 10.4 rise, and it does not say where the arc ends; the solid joins it to the end corners with straight tangent flanks.",
    "Model. Figure 7 gives only 16.5 and 12.5 for the style 2A compression plate's height and does not dimension the raised center, the back tab or the lower recess it draws.",
    "Model. Figure 5 gives no position for the two 6.1 dowel holes and no radius for the curved lower edge of the style 2A end-packing assembly.",
    "Model. Tables II and III print two B values for each adjustable block without saying which is a limit, and the first does not match the minimum passage in the PIN (BN1503/05 gives 4.02 against a 3 mm minimum).",
    "Model. The end-packing PIN example on page 5 uses item type A (M24705/1-AS2A), but the test specimen list on page 17 writes M24705/1E*1.",
    "Model. Table II prints the designator BN60.45 where the numbering scheme gives BN6045; the solid keeps the printed designator."
   ]
  },
  {
   "id": "MIL-DTL-24779D(SH)",
   "slug": "mil-dtl-24779d-sh",
   "title": "Anodes, sacrificial, aluminum alloy",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-24779D(SH) Anodes, sacrificial",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 65,
   "solids": 90,
   "dimensions": 1029,
   "dimensions_met": 1017,
   "kind": "Detail specification",
   "dated": "16 March 2015",
   "status": "Active, 30 December 2020",
   "newest": "Revision D Notice 1 - Validation, 30 December 2020",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5342-01-494-0109, anode, corrosion preventive, MIL-A-24779 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-24779D(SH) package.pdf",
    "scan": "MIL-DTL-24779D(SH) legacy scan.pdf",
    "clean": "MIL-DTL-24779D(SH) clean copy.pdf",
    "record": "MIL-DTL-24779D(SH) validation record.pdf",
    "sheet": "MIL-DTL-24779D(SH) 3D model.pdf",
    "parts": "MIL-DTL-24779D(SH) parts list.pdf",
    "inspection": "MIL-DTL-24779D(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure A-7, page 22",
   "pictures": {
    "iso": "Models/views/ASS-10_LSS-10_with_mounting_holes-freecad.png",
    "pair": "Models/views/ASS-10_LSS-10_with_mounting_holes-pair.png",
    "record": "Models/views/ASS-10_LSS-10_with_mounting_holes-record.png",
    "front": "Models/views/ASS-10_LSS-10_with_mounting_holes-front.png",
    "top": "Models/views/ASS-10_LSS-10_with_mounting_holes-top.png",
    "right": "Models/views/ASS-10_LSS-10_with_mounting_holes-right.png",
    "cut": "Models/views/ASS-10_LSS-10_with_mounting_holes-cut.png"
   },
   "shown_part": "ASS-10/LSS-10 with mounting holes",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid for every anode type, size and option that Appendix A dimensions (figures A-1 to A-48 except the undimensioned assembly A-44): each is the aluminum casting joined with its exposed steel strap, core plate, welded bushing core or pipe, and one solid serves both the conventional (A) and low voltage (L) designation of a figure.",
   "not_modeled": [
    "The draft, mold radii and corner rounds the figures permit, the lettering, the grooves, serrations or threads on the pipe cores, knurl teeth, surface finishes and break edges.",
    "Steel embedded in a casting is not a separate body, so its hidden outline is not checked: the core plates of figures A-13 to A-21 (D4, D5, D6, D7), the welded cores of figures A-40 (D8 to D14) and A-41 (D5, D7, D8, D9, D11 and the D12 vent holes), and the knurl of the LDM threaded core (A-45 D5, D6, D8).",
    "The LDM assembly of figure A-44 carries no dimensions and is not built; its disks and plugs are built singly.",
    "Threads are plain cylinders, so the full-thread depth D11 and end chamfers D9 of the LDM core (A-45) and the class B plug neck D6 (A-47, on the thread diameter) are not modeled; nor are the R D8 corners and weld sizes of figure A-40, the R.12 corner rounds and face flatness D7 of figure A-48, and the 63 microinch finish of figure A-46.",
    "The LRN rod straightness (.25), the rod length adjustment of figure A-43 note 2, and the approximate, nominal and package weights of figures A-43, A-45 and A-48 are not checked."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "65 pages, 1 scanned. SHA-256 c65d7d268d67.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "8,240 of 8,838 items agreed. All 155 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "170 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "60 pages of searchable text, 55 tables (1,952 cells), 48 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "90 solids in STEP AP242. 1,017 of 1,029 stated dimensions measure within limits; 12 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 30 December 2020.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Figure A-48, column 'Mooring chain anode dimensions / D3 (inch) +0.0/-0.12': 1.17 then 1.09. crops/page 64-table.png prints 1.17 for chain size 2 and 1.09 for 2-1/4, and the millimetre column agrees (29.7, 27.7); the dip breaks an otherwise rising D3 series while D1 and D4 stay the same for both sizes, so the printed value itself is a point for an engineer.",
    "Printed value to confirm. Figure A-48, column 'Mooring chain anode dimensions / D3 (mm) +0.0/-3.0': 29.7 then 27.7. crops/page 64-table.png prints 29.7 and 27.7, the metric equivalents of the printed 1.17 and 1.09 inch; the same dip as the inch column, a point for an engineer.",
    "Model. Figure A-4 (LHS-22) gives a minimum weight of 22.2 lb, but the printed 6.00 x 12.00 x 3.00 in casting with two 10.00 x 1.25 x .19 in straps weighs 22.0 lb at the A.3.2 densities, although A.3.2 takes the minimum at minimum material.",
    "Model. Figure A-11: D14 15.25 between hole centres plus twice D10 .75 is 16.75, longer than the overall strap length D4 16.38\u00b1.13 even at the limits, and casting length 12.00 plus twice D5 2.38 gives 16.76; D4 may be misprinted, though its 416 mm matches 16.38.",
    "Model. Figure A-46: shank length D4 should equal thread length D6 .53 plus undercut D14 .125 (.655), but D4 is .625\u00b1.016 on the 3/4 plug (met only near the limits) and .875\u00b1.016 on the 1 plug (cannot be met).",
    "Model. Figure A-46 gives no depth for the #12-28UNF-2B tapped hole of the class A plug; the model uses the class B depth D7 .53 of figure A-47.",
    "Model. Figure A-47 gives no shank or thread length for the class B plug; the model uses the neck D6 plus the ASME B1.20.1 effective thread length L2 (.4078, .5337, .5457 and .6828 in for the 3/8, 1/2, 3/4 and 1 sizes).",
    "Model. Figure A-12 defines the teardrop only by its plan outline and centreline profile; the cross-section shape between them, which must be hydrodynamically fair, is not given.",
    "Model. Figure A-48 does not locate the steel core along its length D6; the drawing shows it standing farther out of the flat face than the tapered face, and the model centres it.",
    "Model. Figure A-40 uses D2 for both the 5.00 in mounting-face length and the slab depth in section A-A; the model takes 5.00 for both.",
    "Model. Figure A-34 prints D4 as 3.19\u00b1.06 in but 8.0\u00b11.5 mm; 3.19 in is 81.0 mm."
   ]
  },
  {
   "id": "MIL-DTL-28731/13G",
   "slug": "mil-dtl-28731-13g",
   "title": "Connectors, electrical, insert (insulator), male rectangular, polarized, center screw lock, for 56 removable contacts",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-28731_13G Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 5,
   "dimensions": 213,
   "dimensions_met": 198,
   "kind": "Detail specification sheet",
   "dated": "17 May 2016",
   "status": "Active, 6 April 2026",
   "newest": "Revision G Notice 2 - Validation, 6 April 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5935-01-516-5984, connector, receptacle, electrical, M28731/13-0080 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-28731_13G package.pdf",
    "scan": "MIL-DTL-28731_13G legacy scan.pdf",
    "clean": "MIL-DTL-28731_13G clean copy.pdf",
    "record": "MIL-DTL-28731_13G validation record.pdf",
    "sheet": "MIL-DTL-28731_13G 3D model.pdf",
    "parts": "MIL-DTL-28731_13G parts list.pdf",
    "inspection": "MIL-DTL-28731_13G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28731_13-0074-freecad.png",
    "pair": "Models/views/M28731_13-0074-pair.png",
    "record": "Models/views/M28731_13-0074-record.png",
    "front": "Models/views/M28731_13-0074-front.png",
    "top": "Models/views/M28731_13-0074-top.png",
    "right": "Models/views/M28731_13-0074-right.png",
    "cut": "Models/views/M28731_13-0074-cut.png"
   },
   "shown_part": "M28731/13-0074",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the five 56-contact male inserts M28731/13-0073, -0074, -0077, -0078 and -0080: the insulator body with its keyed contact cavity, 56 contact holes, four counterbored mounting holes and the two polarizing pins, fused with the PIN's jackscrew type C, fixed screw type E or fixed socket type F.",
   "not_modeled": [
    "The contact hole's .062 throat with its .060 and .005 steps and the two parallel 45\u00b0 chamfers of sections B-B and C-C; the cross of Detail A is carried at constant section from the .273 bore to the cavity floor.",
    "The ten .040 R scallops on the cavity sides, whose positions are not dimensioned, and the .045 R, .040 R, .050 R and .035 R radii at the two polarizing steps; the steps have square corners.",
    "The undimensioned outer corner radii of the flange and shroud, the line drawn across the flange in the side views and the boss drawn around the center hardware in the plan view.",
    "The polarizing pins' keying slugs, spanner nuts and hex seats, the six polarizing positions and the spanner wrench of configuration A (reference only).",
    "The jackscrew's collar and knurl, the fixed screw's head and shoulder and the fixed socket's insert body.",
    "The crimp (MIL-DTL-28731/20) and wrappost (MIL-DTL-28731/26) contacts, the shields of MIL-DTL-28731/19 and the panel mounting hardware of note 17.",
    "Contact letter marking, PIN marking, materials, and the torque, dielectric withstanding voltage and shock requirements."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 3 scanned. SHA-256 09f7b3e85741.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "849 of 867 items agreed. All 24 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "92 checks on size series and limits. 1 break checked against the scan: it is as printed. A later review settled 1 printed value from the column's units and limits.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 2 tables (129 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "5 solids in STEP AP242. 198 of 213 stated dimensions measure within limits; 15 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Notice 2 - Validation, 6 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 prints 1.170 between the outermost contacts, but the .150 inner pair and .130 TYP pitch give 1.710, the value the conversion table lists; the solids use 1.710.",
    "Model. Figure 1 prints 7.90 across the keyed end of the cavity, which cannot fit the .910 MAX width; the conversion table lists .790 and the solids use it.",
    "Model. At nominal values, .650, .790, .035 and .234 put the cavity's upper edge .046 from the .910 MAX outer edge, not the .055 REF printed.",
    "Model. Figure 1 gives the fixed screw type E length as 1.013 REF, but the conversion table lists 1.015 and no 1.013; the solids use 1.013.",
    "Model. Figure 1 does not dimension the shroud's outside length, the rear body's width, the length of the upper-left .040 polarizing step, or the jackscrew's head length; the solids use 2.060, .910, .140 and .500."
   ]
  },
  {
   "id": "MIL-DTL-28731/19E",
   "slug": "mil-dtl-28731-19e",
   "title": "Connector, electrical, rectangular shield, for 20, 38, 56, 90 or 120 removable contacts",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-28731_19E Connector, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 22,
   "dimensions": 176,
   "dimensions_met": 176,
   "kind": "Detail specification sheet",
   "dated": "15 March 2004",
   "status": "Active, 7 February 2023",
   "newest": "Revision E Notice 3 - Validation, 7 February 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5935-01-122-2547, backshell, electrical connector, M28731/19-0014 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-28731_19E package.pdf",
    "scan": "MIL-DTL-28731_19E legacy scan.pdf",
    "clean": "MIL-DTL-28731_19E clean copy.pdf",
    "record": "MIL-DTL-28731_19E validation record.pdf",
    "sheet": "MIL-DTL-28731_19E 3D model.pdf",
    "parts": "MIL-DTL-28731_19E parts list.pdf",
    "inspection": "MIL-DTL-28731_19E inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28731_19-0012-freecad.png",
    "pair": "Models/views/M28731_19-0012-pair.png",
    "record": "Models/views/M28731_19-0012-record.png",
    "front": "Models/views/M28731_19-0012-front.png",
    "top": "Models/views/M28731_19-0012-top.png",
    "right": "Models/views/M28731_19-0012-right.png",
    "cut": "Models/views/M28731_19-0012-cut.png"
   },
   "shown_part": "M28731/19-0012",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 22 rectangular shields M28731/19-0001 to -0022: a block A long, C wide and B high with the cable clamp E wide on the end face (Side) or turned up on the top surface (Top), projecting D, and the wire bundle opening through it.",
   "not_modeled": [
    "The shield wall thickness, its inside cavity, corner radii, the chamfered corner at the clamp end and the overhanging lip of the top cover, none of which is dimensioned; the solids are outside envelopes.",
    "The hinged latch arm and its pivot, the clamp saddle, the clamp screws and the rivets drawn in Figure 1.",
    "The central clearance hole for the actuating hardware shaft and its MS35489-4 grommet (note 5), and the four cover screw holes; the plan view draws them without dimensions.",
    "The four .086-56, .122-40 or .138-32 mounting screws supplied with the shield (note 4).",
    "The band drawn below the B line in the side view and the notch at the foot of the end view, which carry no dimension.",
    "Material, finish, marking and packaging to MIL-STD-2073-1."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 1 scanned. SHA-256 5e6f378b37b4.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "343 of 563 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "105 checks on size series and limits. 7 breaks checked against the scan: all are as printed. A later review settled 1 printed value from the column's units and limits.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 1 table (198 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "22 solids in STEP AP242. 176 of 176 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 3 - Validation, 7 February 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, column 'Dim \u2019E\u2019 max': 720 then 0.92. Page 3 prints 720 with no decimal point for -0001/-0002; against .920 and 1.110 in the larger sizes it reads as .720 inches, so the printed value itself looks wrong, a point for an engineer.",
    "Model. Table I prints Dim C and Dim E for M28731/19-0001 and -0002 as 720 with no decimal point, beside D .340 and A 1.340; the solids use .720 in, and an engineer should confirm the value."
   ]
  },
  {
   "id": "MIL-DTL-3661/46B",
   "slug": "mil-dtl-3661-46b",
   "title": "Lampholders, housing, indicator-light, watertight, style LH88",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-3661_46B Lampholders, housing",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 2,
   "dimensions": 36,
   "dimensions_met": 36,
   "kind": "Military specification sheet",
   "dated": "21 September 2018",
   "status": "Active, 18 September 2023",
   "newest": "Revision B Notice 1 - Validation, 18 September 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "6210-01-406-1418, housing, light, MIL-DTL-3661/46 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-3661_46B package.pdf",
    "scan": "MIL-DTL-3661_46B legacy scan.pdf",
    "clean": "MIL-DTL-3661_46B clean copy.pdf",
    "record": "MIL-DTL-3661_46B validation record.pdf",
    "sheet": "MIL-DTL-3661_46B 3D model.pdf",
    "parts": "MIL-DTL-3661_46B parts list.pdf",
    "inspection": "MIL-DTL-3661_46B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/LH88_2-freecad.png",
    "pair": "Models/views/LH88_2-pair.png",
    "record": "Models/views/LH88_2-record.png",
    "front": "Models/views/LH88_2-front.png",
    "top": "Models/views/LH88_2-top.png",
    "right": "Models/views/LH88_2-right.png",
    "cut": "Models/views/LH88_2-cut.png"
   },
   "shown_part": "LH88/2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style LH88 watertight indicator-light housing, one for each of the two Table II type designations, both the same shape: a 41/64 front flange 5/64 thick with a 5/16-32 lens thread bore, a 15/32-32 UNS-2A bushing 7/16 long with a .439 flat, a rear housing, and two slotted terminals 7/32 apart reaching 29/32 behind the flange.",
   "not_modeled": [
    "The internal construction the figure does not dimension: the cavity for the M15098/11 neon lamp, the 62K or 27K internal resistor, the lens seat for the LC33 lens, and the insulator and contacts drawn in the end view; each solid is one body.",
    "The 1/16 x 9/16 O.D. O-ring, the NASM35333-121 lockwasher and the MS25082-8 hex nut supplied on the bushing, which their own documents dimension, and any groove for the O-ring.",
    "The thread forms and class limits, the raised rim drawn on the flange front face and the chamfer at the rear of the housing, none of which the figure dimensions (Note 3 leaves housing and terminal design optional within the configuration shown).",
    "The recommended mounting hole, a panel feature; the bushing flat and the rear housing are checked against it.",
    "The watertight seal and the Table I qualification tests; the resistor, lamp and lens are recorded as parameters only.",
    "The tolerances are checked but not built as limit-of-size variants."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, 1 scanned. SHA-256 97714695944c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "247 of 249 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "30 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 3 tables (46 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 36 of 36 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 18 September 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The lens thread prints as 5/16-32 UNEF-28, and 28 is not a thread class; the model reads it as an internal 2B thread in the flange front face, where its leader ends, but the sheet does not settle internal or external and gives no thread depth."
   ]
  },
  {
   "id": "MIL-DTL-3661/59A w/AMENDMENT 2",
   "slug": "mil-dtl-3661-59a-w-amendment-2",
   "title": "Lampholder, lenses, indicator light, style LC45",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-3661_59A w_AMENDMENT 2 Lampholder, lenses",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 6,
   "dimensions": 78,
   "dimensions_met": 78,
   "kind": "Detail specification sheet",
   "dated": "29 July 2024",
   "status": "Active, 29 July 2024",
   "newest": "Revision A Amendment 2 (all previous amendments incorporated), 29 July 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 22,
   "by_class": {
    "Seawolf": 22
   },
   "stock_examples": [
    "6210-01-382-3935, lens, light, MIL-DTL-3661/59 (Seawolf)",
    "6210-01-382-7704, lens, light, MIL-DTL-3661/59 (Seawolf)",
    "6210-01-382-7770, lens, light, MIL-DTL-3661/59 (Seawolf)",
    "6210-01-382-8301, lens, light, MIL-DTL-3661/59 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-3661_59A w_AMENDMENT 2 package.pdf",
    "scan": "MIL-DTL-3661_59A w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-DTL-3661_59A w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-DTL-3661_59A w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-DTL-3661_59A w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-DTL-3661_59A w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-DTL-3661_59A w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/LC45YN3-freecad.png",
    "pair": "Models/views/LC45YN3-pair.png",
    "record": "Models/views/LC45YN3-record.png",
    "front": "Models/views/LC45YN3-front.png",
    "top": "Models/views/LC45YN3-top.png",
    "right": "Models/views/LC45YN3-right.png",
    "cut": "Models/views/LC45YN3-cut.png"
   },
   "shown_part": "LC45YN3",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid models of the style LC45 lens body for the six type designations of Table I (LC45RN3 to LC45CN3), which share one shape: the 1-7/16 by 1-1/2 by 1/4 lens body, the 1.000 diameter rear boss to 13/16 overall, the 3/4 by 1/2 rear cavity, and the two captive screw holes.",
   "not_modeled": [
    "The 4-40 captive screws (9/16 long), the brass bushings that hold them and the rubber gasket behind the lens body are separate parts with no other dimensions and are not modeled.",
    "Lens color and light transmission (Table I, requirement 2(a)), the white and gray paint layers (requirement 4), the engraving on the front face (requirement 5) and the back-side marking (requirement 10) are not modeled.",
    "Sealing, temperature cycling, shock, transmission and surface endurance requirements (Figure 2 test apparatus) are performance and test requirements, not part geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 3a79ff08cfcb.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,023 of 1,026 items agreed. All 3 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "20 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (52 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "6 solids in STEP AP242. 78 of 78 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Amendment 2 (all previous amendments incorporated), 29 July 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no depth for the rear cavity (paint-free per requirement 9), so the front wall thickness of the lens behind the engraved face is not fixed by the document."
   ]
  },
  {
   "id": "MIL-DTL-45913/1B w/ AMENDMENT 3",
   "slug": "mil-dtl-45913-1b-w-amendment-3",
   "title": "Nut, self-locking, hexagon, non-metallic locking feature, 250 \u00b0F, UNC/UNF-2B",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-45913_1B w_ AMENDMENT 3 Nut, self-locking",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 47,
   "dimensions": 235,
   "dimensions_met": 235,
   "kind": "Detail specification sheet",
   "dated": "20 December 2024",
   "status": "Active, 20 December 2024",
   "newest": "Revision B Amendment 3 (all previous amendments incorporated), 20 December 2024",
   "superseding": "",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 3,
   "by_class": {
    "Seawolf": 3
   },
   "stock_examples": [
    "5310-01-510-6999, nut, self-locking, hexagon, M45913/1-4CG8 (Seawolf)",
    "5310-01-511-0316, nut, self-locking, hexagon, M45913/1-8CG8 (Seawolf)",
    "5310-01-511-0326, nut, self-locking, hexagon, M45913/1-10CG8 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-45913_1B w_ AMENDMENT 3 package.pdf",
    "scan": "MIL-DTL-45913_1B w_ AMENDMENT 3 legacy scan.pdf",
    "clean": "MIL-DTL-45913_1B w_ AMENDMENT 3 clean copy.pdf",
    "record": "MIL-DTL-45913_1B w_ AMENDMENT 3 validation record.pdf",
    "sheet": "MIL-DTL-45913_1B w_ AMENDMENT 3 3D model.pdf",
    "parts": "MIL-DTL-45913_1B w_ AMENDMENT 3 parts list.pdf",
    "inspection": "MIL-DTL-45913_1B w_ AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M45913_1-6C-freecad.png",
    "pair": "Models/views/M45913_1-6C-pair.png",
    "record": "Models/views/M45913_1-6C-record.png",
    "front": "Models/views/M45913_1-6C-front.png",
    "top": "Models/views/M45913_1-6C-top.png",
    "right": "Models/views/M45913_1-6C-right.png",
    "cut": "Models/views/M45913_1-6C-cut.png"
   },
   "shown_part": "M45913/1-6C",
   "application": "FreeCAD 1.1.4",
   "modeled": "47 self-locking hexagon nuts, one per Table I dash number (00F to 24F), each a single solid of the hexagon wrenching portion of height D with its corners turned to the reference width B, and a round collar holding the locking insert out to the overall thickness C, bored through at the thread major diameter.",
   "not_modeled": [
    "Material codes (Table II) and finish codes (Table III) do not change the geometry, so each solid stands for every M45913/1 part number with that dash number (for example M45913/1-4C covers M45913/1-4CG5QX).",
    "Internal threads (UNC-2B or UNF-2B per ASME B1.1) are a plain bore at the nominal major diameter.",
    "The non-metallic locking insert is not a separate body; its size and location are at the manufacturer's option, and the solid fills the collar out to the thread bore.",
    "The bearing-face and collar-end chamfers on the hexagon corners, the countersink at the bearing face and the rounded crimp of the collar shown in Figure 1 carry no dimensions and are not modeled.",
    "Edge breaks of .003 to .005 (note 3), surface texture Ra 125, material, plating and workmanship are not geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 cd9d7dceccb2.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,003 of 1,017 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "605 checks on size series and limits. 49 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (418 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "47 solids in STEP AP242. 235 of 235 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Amendment 3 (all previous amendments incorporated), 20 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, column 'A / Width across flats / Min': 0.43 then 0.428. Page 3 prints .430 for 012C and 012F and .428 for 4C and 4F under the same .439 maximum, so the #12 sizes carry a tighter across-flats minimum than the 1/4 sizes; the printed .430 breaks the rising series and is a point for an engineer.",
    "Printed value to confirm. Table I, column 'D / Ref': 0.335 then 0.324. Page 3 prints .335 for 6C and 6F and .324 for 7C and 7F while C stays .468/.438 for both sizes; this is the only fall in the D column, so the printed value is a point for an engineer.",
    "Model. The sheet gives no diameter or end shape for the collar between D and C; the models use A MIN with a square end, and an engineer must confirm or supply the collar envelope."
   ]
  },
  {
   "id": "MIL-DTL-5423G",
   "slug": "mil-dtl-5423g",
   "title": "Boots, dust and moisture seal (for toggle and push-button switches, circuit breakers, and rotary-actuated parts), general specification for",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-5423G Boots, dust and moisture seal",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 19,
   "solids": 11,
   "dimensions": 95,
   "dimensions_met": 95,
   "kind": "Detail specification",
   "dated": "21 December 2024",
   "status": "Active, 21 December 2024",
   "newest": "Revision G Supplement 1, 21 December 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5930-01-412-6919, boot, dust and moisture seal, MIL-B-5423 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-5423G package.pdf",
    "scan": "MIL-DTL-5423G legacy scan.pdf",
    "clean": "MIL-DTL-5423G clean copy.pdf",
    "record": "MIL-DTL-5423G validation record.pdf",
    "sheet": "MIL-DTL-5423G 3D model.pdf",
    "parts": "MIL-DTL-5423G parts list.pdf",
    "inspection": "MIL-DTL-5423G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 9",
   "pictures": {
    "iso": "Models/views/MIL-DTL-5423_bushing_1-freecad.png",
    "pair": "Models/views/MIL-DTL-5423_bushing_1-pair.png",
    "record": "Models/views/MIL-DTL-5423_bushing_1-record.png",
    "front": "Models/views/MIL-DTL-5423_bushing_1-front.png",
    "top": "Models/views/MIL-DTL-5423_bushing_1-top.png",
    "right": "Models/views/MIL-DTL-5423_bushing_1-right.png",
    "cut": "Models/views/MIL-DTL-5423_bushing_1-cut.png"
   },
   "shown_part": "MIL-DTL-5423 bushing 1",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the two interchangeable parts of the Figure 1 test plug for type C boots: the shaft for each of the 6 shaft letters A to F, at its SHAFT DETAILS test diameter, and the bushing for each of the 5 bushing numbers 1 to 5, at its BUSHING DETAILS thread.",
   "not_modeled": [
    "The boots themselves, which the individual specification sheets dimension, not this document.",
    "The ring (Sterling Precision cat. no. G7-7 or equal), back-up nut, stop nut and lockwasher of the test plug assembly, which the figure names but does not dimension, and the assembled test plug.",
    "Which shaft letter is paired with which bushing number for a given boot, which the specification sheets state (4.3.1).",
    "The thread form of the bushing (pitch, 2A class limits); it is a plain cylinder at the nominal major diameter.",
    "The surface finish marks 64 and 32 on the shaft."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "19 pages, 3 scanned. SHA-256 c8f40f611912.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,932 of 4,968 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "30 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "16 pages of searchable text, 8 tables (220 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "11 solids in STEP AP242. 95 of 95 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Supplement 1, 21 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-5423/9H",
   "slug": "mil-dtl-5423-9h",
   "title": "Boots, dust and water seal, type C (for use as rotary-shaft seals), type CS (for use as RFI-shielded, rotary-shaft seals)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-5423_9H Boots, dust and water seal",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 2,
   "solids": 14,
   "dimensions": 84,
   "dimensions_met": 84,
   "kind": "Detail specification sheet",
   "dated": "21 December 2024",
   "status": "Active, 21 December 2024",
   "newest": "Revision H, 21 December 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5930-01-412-6919, boot, dust and moisture seal, M5423/09-14 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-5423_9H package.pdf",
    "scan": "MIL-DTL-5423_9H legacy scan.pdf",
    "clean": "MIL-DTL-5423_9H clean copy.pdf",
    "record": "MIL-DTL-5423_9H validation record.pdf",
    "sheet": "MIL-DTL-5423_9H 3D model.pdf",
    "parts": "MIL-DTL-5423_9H parts list.pdf",
    "inspection": "MIL-DTL-5423_9H inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M5423_09-05-freecad.png",
    "pair": "Models/views/M5423_09-05-pair.png",
    "record": "Models/views/M5423_09-05-record.png",
    "front": "Models/views/M5423_09-05-front.png",
    "top": "Models/views/M5423_09-05-top.png",
    "right": "Models/views/M5423_09-05-right.png",
    "cut": "Models/views/M5423_09-05-cut.png"
   },
   "shown_part": "M5423/09-05",
   "application": "FreeCAD 1.1.4",
   "modeled": "14 envelope solids, one per PIN M5423/09-01 to -14 (sizes 1, 2, 4, 6, 7, 9 and 10 in type C and type CS): a hex of the table's hex size to .175, a round rubber cap to the overall height (.219, or .359 for size 10) with a shaft hole of the table's shaft size, the insert thread bore through the hex, and the .020 panel sealing rib under the bottom face.",
   "not_modeled": [
    "The O-ribs and the lubricant well inside the seal are drawn but not dimensioned, so the shaft hole is one plain cylinder.",
    "The boundary between the brass nut and the molded silicone rubber is not modeled; each solid is one envelope.",
    "The type CS metal-impregnated silicone or knitted Monel wire mesh (.06 thick) lies inside the envelope and is not modeled, so type C and type CS solids of the same size are identical.",
    "The permissible rubber overlay on the hex (.005 max) is not added; the hex is at its nominal size.",
    "The chamfer on the top edge and the narrower collar the figure draws below the hex are not dimensioned and are not modeled.",
    "The insert thread is not cut; materials (silicone rubber grade 60, brass nickel plated), lubricant and marking are not geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, 0 scanned. SHA-256 593d514f0ebe.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "291 of 319 items agreed. 7 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "30 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (70 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "14 solids in STEP AP242. 84 of 84 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H, 21 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 1, callout .219 (5.56), second line: read as (5.56), could be 15.56).",
    "Model. The size 10 footnote raises the height from .219 to .359 but does not say whether the added .140 is in the hex or in the rubber cap; the models keep the .175 height to the hex and make the cap taller."
   ]
  },
  {
   "id": "MIL-DTL-83420R",
   "slug": "mil-dtl-83420r",
   "title": "Wire rope, flexible, for aircraft control, general specification for",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-83420R Wire rope, flexible",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 29,
   "solids": 44,
   "dimensions": 410,
   "dimensions_met": 401,
   "kind": "Detail specification",
   "dated": "7 January 2022",
   "status": "Active, 7 January 2022",
   "newest": "Revision R, 7 January 2022",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4010-01-469-7559, rope, wire, MIL-DTL-83420 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-83420R package.pdf",
    "scan": "MIL-DTL-83420R legacy scan.pdf",
    "clean": "MIL-DTL-83420R clean copy.pdf",
    "record": "MIL-DTL-83420R validation record.pdf",
    "sheet": "MIL-DTL-83420R 3D model.pdf",
    "parts": "MIL-DTL-83420R parts list.pdf",
    "inspection": "MIL-DTL-83420R inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 2, page 28",
   "pictures": {
    "iso": "Models/views/MIL-DTL-83420_type_II_sheave_1_16_7x7_jacket_1_8-freecad.png",
    "pair": "Models/views/MIL-DTL-83420_type_II_sheave_1_16_7x7_jacket_1_8-pair.png",
    "record": "Models/views/MIL-DTL-83420_type_II_sheave_1_16_7x7_jacket_1_8-record.png",
    "front": "Models/views/MIL-DTL-83420_type_II_sheave_1_16_7x7_jacket_1_8-front.png",
    "top": "Models/views/MIL-DTL-83420_type_II_sheave_1_16_7x7_jacket_1_8-top.png",
    "right": "Models/views/MIL-DTL-83420_type_II_sheave_1_16_7x7_jacket_1_8-right.png",
    "cut": "Models/views/MIL-DTL-83420_type_II_sheave_1_16_7x7_jacket_1_8-cut.png"
   },
   "shown_part": "MIL-DTL-83420 type II sheave 1/16 7x7 jacket 1/8",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of revolution of the 44 endurance-test sheaves of Figure 2, one for each row of Table VI (21, type I rope) and Table VII (23, type II rope): outside diameter C, groove bottom diameter D, width G, groove bottom radius ER, groove sides at 5.0 deg and the 0.062 lip radius where it fits.",
   "not_modeled": [
    "The wire rope itself: Tables I and II give its diameters, tolerances, constructions and breaking strengths, with no drawing.",
    "The center bore Figure 2 draws in the face view, which has no dimension.",
    "The 0.062 lip radius on the 15 sheaves where it does not fit at the middle of the limits.",
    "Material (tool steel), hardness (Rockwell C60 minimum) and the ground finish of the groove surfaces.",
    "The endurance test machine of Figure 1 and the shipping reels of Table VIII, which the document gives only as test conditions and minimum drum and arbor hole diameters."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "29 pages, 0 scanned. SHA-256 19d2cd7de3d3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "7,998 of 8,362 items agreed. All 26 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "708 checks on size series and limits. 26 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "22 pages of searchable text, 11 tables (1,042 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "44 solids in STEP AP242. 401 of 410 stated dimensions measure within limits; 9 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision R, 7 January 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table VI, column 'Sheave ratio to 1 / Composition A & B rm temp test': 7 then 13. Page 24 prints 7.0 for 1/16 7 x 19 and 13.0 for 3/32 7 x 7; the column alternates between 7 x 19 sizes (ratio 7.0) and 7 x 7 sizes (ratio 12.0 or 13.0). 13.0 is the only 7 x 7 room-temperature ratio that is not 12.0: D 1.220 follows 13 x 3/32, but C 1.406 equals 12 x 3/32 + 3d, so C is not D+3d (1.501) as footnote 2 requires in that row, a point for an engineer.",
    "Printed value to confirm. Table VI, column 'C 1/ 2/ / +1/64 -1/64 / in.': 0.814 then 0.703. Page 24 prints 0.814 for the 1/32 -65 \u00b0F sheave and 0.703 for the 3/64 room-temperature sheave; each size lists a smaller room-temperature sheave and a larger -65 \u00b0F sheave, so C falls at each new size. In the 1/32 rows C is not D+3d as footnote 2 gives: 0.814 against 0.844 for D 0.750 (0.814 fits D 0.719, which is 23 x 1/32), and the 1/32 room-temperature row prints C 0.703 against 0.656, a point for an engineer.",
    "Printed value to confirm. Table VI, column 'D / +.005 -.000 / in.': 0.75 then 0.562. Page 24 prints 0.750 for the 1/32 -65 \u00b0F sheave and 0.562 for the 3/64 room-temperature sheave; the rows alternate between the two test sheaves. 0.750 is 24 x 1/32 while the row's ratio is 23.0 (D 0.719) and its C 0.814 fits D 0.719 + 3d, a point for an engineer.",
    "Model. Footnote 2/ (C = D + 3d) does not hold on type I 1/32 3x7 18.0:1 (C 0.703 against 0.656); type I 1/32 3x7 23.0:1 (C 0.814 against 0.844); type I 3/32 7x7 13.0:1 (C 1.406 against 1.501); type II 1/32 3x7 jacket 3/64 (C 0.938 against 0.891).",
    "Model. Type I 1/32 3x7 23.0:1 prints D 0.750, which is 24.0 x 1/32; its 23.0 ratio gives 0.719.",
    "Model. The groove is wider than G at diameter C on type II 9/32 7x19 jacket 13/32 (0.501 against G 1/2 at the printed values); type II 3/8 7x19 jacket 1/2 (0.603 against G 9/16 +1/64 at the narrowest limits), so those solids stop short of C.",
    "Model. The 0.062 lip radius does not fit on 15 of 44 sheaves at the middle of the limits (groove side too short on 5, rim too narrow on 10); those lips are sharp.",
    "Model. Figure 2 draws a center bore with no diameter; the sheaves are modeled solid."
   ]
  },
  {
   "id": "MIL-DTL-83513/4K",
   "slug": "mil-dtl-83513-4k",
   "title": "Connectors, electrical, rectangular, receptacle, microminiature, polarized shell, socket contacts, class M, crimp type",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-83513_4K Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 10,
   "solids": 10,
   "dimensions": 192,
   "dimensions_met": 192,
   "kind": "Detail specification sheet",
   "dated": "14 December 2024",
   "status": "Active, 14 December 2024",
   "newest": "Revision K (all previous amendments incorporated), 14 December 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "6150-01-485-9287, lead assembly, electrical, M83513/04-A02N (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-83513_4K package.pdf",
    "scan": "MIL-DTL-83513_4K legacy scan.pdf",
    "clean": "MIL-DTL-83513_4K clean copy.pdf",
    "record": "MIL-DTL-83513_4K validation record.pdf",
    "sheet": "MIL-DTL-83513_4K 3D model.pdf",
    "parts": "MIL-DTL-83513_4K parts list.pdf",
    "inspection": "MIL-DTL-83513_4K inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M83513_04-J-freecad.png",
    "pair": "Models/views/M83513_04-J-pair.png",
    "record": "Models/views/M83513_04-J-record.png",
    "front": "Models/views/M83513_04-J-front.png",
    "top": "Models/views/M83513_04-J-top.png",
    "right": "Models/views/M83513_04-J-right.png",
    "cut": "Models/views/M83513_04-J-cut.png"
   },
   "shown_part": "M83513/04-J",
   "application": "FreeCAD 1.1.4",
   "modeled": "Ten envelope solids, one per insert arrangement letter A to K (9 to 100 cavities, configurations A, B and C, with J the standard and K the alternate 100-cavity shroud): the flange with its two mounting holes, the shroud with the polarized interface opening, the insulator face inside it and the rear body.",
   "not_modeled": [
    "The socket contacts (.032 dia, tips .130 to .144 above datum X), their .050 pitch and .025 row offset and the Figure 2 cavity layout, because the sheet gives no spacing between contact rows; each solid stops at the insulator face.",
    "The wire leads (wire types 01 to 58 and their lengths), the shell finish, materials and the interfacial seal as a separate part; each solid stands for every wire type and shell finish under its insert letter (3,480 PINs in all).",
    "The positional and profile tolerances (.020, dia .014 and dia .008 positions, the .0038 interface profile with its .150 and .140 projected zones and the .006 zone between points A-B and C-D), the optional flange corner radius and the .032 R MAX inside corner at the base of the shroud.",
    "The mounting hardware (MIL-DTL-83513/5) and the mating plug (MIL-DTL-83513/1 or /3)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "10 pages, 4 scanned. SHA-256 d03c1ce95c3e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "672 of 937 items agreed. All 30 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "133 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 5 tables (432 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "10 solids in STEP AP242. 192 of 192 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K (all previous amendments incorporated), 14 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The alternate shroud length prints 1.498 \u00b1.010 on Figure 1, but the page 4 inch-millimetre list gives 1.438 (36.53) and no 1.498; the models use 1.498.",
    "Model. The sheet gives the .050 contact pitch and .025 row offset but no spacing between contact rows, so the socket positions across the interface cannot be placed from this sheet.",
    "Model. B BSC could also be read to the theoretical sharp corners of the interface on configurations A and B, which would make the interface .098 narrower; the extension lines and C, which exceeds B by about two wall thicknesses on every size, support the widest-width reading used here.",
    "Model. The shroud height to datum X is printed twice in each section, .195 \u00b1.003 and .195 \u00b1.005 (.195 with the \u00b1.005 general tolerance on configuration C); which tolerance governs should be confirmed."
   ]
  },
  {
   "id": "MIL-DTL-83796/1C w/AMENDMENT 1",
   "slug": "mil-dtl-83796-1c-w-amendment-1",
   "title": "Hose assembly, rubber, lightweight, medium pressure, field attachable end fittings, flare to flare",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-DTL-83796_1C w_AMENDMENT 1 Hose assembly, rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "16 December 2014",
   "status": "Active, 19 November 2024",
   "newest": "Revision C Notice 3 - Validation, 19 November 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "3040-01-459-1122, shaft, shouldered, M83796/1E690A00 (Seawolf)"
   ],
   "files": {
    "package": "MIL-DTL-83796_1C w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-83796_1C w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-83796_1C w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-83796_1C w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 2 scanned. SHA-256 d862e581edd1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,052 of 1,062 items agreed. All 15 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "90 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 3 tables (178 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-83796/1 is a hose assembly sheet that defines styles A through M, part numbering, material and finish codes, the hose cut-off factor for each style and dash number (Table I) and the reference hose OD (Table II), while the assembly length L is set by each part number, the elbow drop heights A and B are taken from the MIL-DTL-83798 fitting slash sheets, and the fitting shapes are defined only in MIL-DTL-83798, so the sheet fixes no part shape with dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 3 - Validation, 19 November 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-15624H",
   "slug": "mil-prf-15624h",
   "title": "Gasket material, rubber, 50 durometer hardness (maximum)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-15624H Gasket material, rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "22 March 2016",
   "status": "Active, 17 March 2026",
   "newest": "Revision H Notice 2 - Validation, 17 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Seawolf": 2
   },
   "stock_examples": [
    "9320-01-420-6520, rubber strip, MIL-R-15624 (Seawolf)",
    "5330-01-491-9182, gasket, MIL-R-15624CL1 36W60LX0.030T (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-15624H package.pdf",
    "scan": "MIL-PRF-15624H legacy scan.pdf",
    "clean": "MIL-PRF-15624H clean copy.pdf",
    "record": "MIL-PRF-15624H validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 0712bcebe448.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,345 of 3,345 items agreed. All 1 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "35 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 2 tables (240 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-15624H is a performance specification for 50 durometer synthetic rubber gasket material in Classes I to III that sets physical properties, aging, off-gassing, toxicity, color marking and testing, gives in Table I only width and thickness tolerances for sheet and strip and in 3.2.2.1 and 3.2.2.2 only default roll and strip put-up sizes, and leaves the thickness, cross-section and the form and dimensions of cut, molded and extruded gasket shapes to the order (3.2.2, 6.2), with no drawing.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Notice 2 - Validation, 17 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-16552F",
   "slug": "mil-prf-16552f",
   "title": "Filters, air environmental control system, cleanable, impingement (high velocity type)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-16552F Filters, air environmental control system",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 7,
   "dimensions": 56,
   "dimensions_met": 55,
   "kind": "Performance specification",
   "dated": "01 June 2001",
   "status": "Active, 7 April 2026",
   "newest": "Revision F Notice 2 - Validation, 7 April 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4130-01-516-2981, filter element, air conditioning, M16552-12AF-1 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-16552F package.pdf",
    "scan": "MIL-PRF-16552F legacy scan.pdf",
    "clean": "MIL-PRF-16552F clean copy.pdf",
    "record": "MIL-PRF-16552F validation record.pdf",
    "sheet": "MIL-PRF-16552F 3D model.pdf",
    "parts": "MIL-PRF-16552F parts list.pdf",
    "inspection": "MIL-PRF-16552F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 10",
   "pictures": {
    "iso": "Models/views/MIL-PRF-16552_13AF-freecad.png",
    "pair": "Models/views/MIL-PRF-16552_13AF-pair.png",
    "record": "Models/views/MIL-PRF-16552_13AF-record.png",
    "front": "Models/views/MIL-PRF-16552_13AF-front.png",
    "top": "Models/views/MIL-PRF-16552_13AF-top.png",
    "right": "Models/views/MIL-PRF-16552_13AF-right.png",
    "cut": "Models/views/MIL-PRF-16552_13AF-cut.png"
   },
   "shown_part": "MIL-PRF-16552 13AF",
   "application": "FreeCAD 1.1.4",
   "modeled": "Seven solids, one for each size number 10AF to 16AF in Figure 1: the filter frame as a rectangular ring A wide and B high, 2 1/16 in deep with a 5/8 in face on every side, airflow along X, A along Y and B along Z.",
   "not_modeled": [
    "The filtering media and the protective guards on both faces (3.14), which Figure 1 draws without dimensions.",
    "The handles on two adjacent sides and their recess in Section A-A (3.15), drawn without dimensions.",
    "The drainage means on all sides of the frame (3.13.1), drawn as round holes in the edge view without dimensions.",
    "The identification plate and air flow arrow (3.5).",
    "Class 1 and Class 2 (nonmagnetic) filters differ only in material (3.2.4), so one solid per size serves both classes.",
    "The performance, cleanability, drop, strength and material requirements (3.10 to 3.16, Tables I and II)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, 0 scanned. SHA-256 68412c34909d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,325 of 3,330 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "18 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 5 tables (119 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "7 solids in STEP AP242. 55 of 56 stated dimensions measure within limits; 1 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 2 - Validation, 7 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Size 15AF prints a net face area of 2.30 sq ft, but its printed A and B of 19 1/2 in less two 5/8 in frame faces give 18 1/4 in by 18 1/4 in, or 2.31 sq ft; the other six sizes match their printed areas, so an engineer should confirm which value governs.",
    "Model. Paragraph 4.6.5 sets the flatness limit in datum plane B of Figure 1, but Figure 1 marks B only as the filter height and shows no datum plane."
   ]
  },
  {
   "id": "MIL-PRF-17869B(SH)",
   "slug": "mil-prf-17869b-sh",
   "title": "Pumps and motors, hydraulic (naval shipboard use)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-17869B(SH) Pumps and motors, hydraulic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 19,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "20 December 2018",
   "status": "Active, 21 March 2023",
   "newest": "Revision B Notice 1 - Validation, 21 March 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4320-01-418-7611, pump, axial pistons, MIL-P-17869 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-17869B(SH) package.pdf",
    "scan": "MIL-PRF-17869B(SH) legacy scan.pdf",
    "clean": "MIL-PRF-17869B(SH) clean copy.pdf",
    "record": "MIL-PRF-17869B(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "19 pages, 0 scanned. SHA-256 4578063a9083.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "8,555 of 8,620 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "20 pages of searchable text, 2 tables (240 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-17869B is a performance specification for naval shipboard hydraulic pumps and motors: it defines pressure, flow, noise, shock, materials and verification requirements, and leaves envelope dimensions to the installation drawing or ICD and the drive interface to SAE J744 or ISO 3019, so it fixes no part shape by dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 21 March 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-19500/358G w/AMENDMENT 3",
   "slug": "mil-prf-19500-358g-w-amendment-3",
   "title": "Semiconductor device, diode, silicon, voltage regulator, stud mount package, standard and reverse polarity, types 1N3305B through 1N3350B and 1N4549B through 1N4554B, quality levels JAN, jantx, jantxv, and jans",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-19500_358G w_AMENDMENT 3 Semiconductor device, diode",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 16,
   "solids": 104,
   "dimensions": 2080,
   "dimensions_met": 2080,
   "kind": "Performance specification sheet",
   "dated": "29 May 2026",
   "status": "Active, 29 May 2026",
   "newest": "Revision G Amendment 3 (all previous amendments incorporated), 29 May 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5961-01-618-6431, semiconductor device, diode, MIL-PRF-19500/358 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-19500_358G w_AMENDMENT 3 package.pdf",
    "scan": "MIL-PRF-19500_358G w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MIL-PRF-19500_358G w_AMENDMENT 3 clean copy.pdf",
    "record": "MIL-PRF-19500_358G w_AMENDMENT 3 validation record.pdf",
    "sheet": "MIL-PRF-19500_358G w_AMENDMENT 3 3D model.pdf",
    "parts": "MIL-PRF-19500_358G w_AMENDMENT 3 parts list.pdf",
    "inspection": "MIL-PRF-19500_358G w_AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/1N3325B-freecad.png",
    "pair": "Models/views/1N3325B-pair.png",
    "record": "Models/views/1N3325B-record.png",
    "front": "Models/views/1N3325B-front.png",
    "top": "Models/views/1N3325B-top.png",
    "right": "Models/views/1N3325B-right.png",
    "cut": "Models/views/1N3325B-cut.png"
   },
   "shown_part": "1N3325B",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the stud mount outline of figure 1 (modified DO-5 base with a DO-4 cap), one for each of the 52 device types of table IV in standard (B) and reverse (RB) polarity, 104 in all and all the same shape: a .250-28 stud .4375 long with a .2345 undercut, a .677 hex .1575 thick with chamfered faces, a .3395 diameter cap to .450 from the seating plane, and a flat terminal lug .250 wide and .0385 thick with a .175 hole, ending 1.000 from the seating plane.",
   "not_modeled": [
    "The quality levels as separate solids: the 416 possible PINs (52 device types, B and RB, and the JAN, JANTX, JANTXV and JANS levels) are more than 400, so each device type is built once per suffix and every quality level of that type and suffix has the same solid.",
    "The .250-28 thread form (flanks, pitch and the incomplete threads within SU): the thread is a plain cylinder at its major diameter.",
    "The flatness of .002 on the seating plane and its perpendicularity of .006 to datum A: a nominal solid holds them exactly, so they have no check.",
    "The round neck and tapered shoulder figure 1 draws between the cap and the terminal lug, the rounded top edge of the cap, the chamfer at the end of the stud and the inner circle the end view draws on the top of the cap, none of which is dimensioned.",
    "The inside of the device (the die and the internal conductors of 3.4): each solid is the outside shape as one body.",
    "Polarity (which electrode is joined to the case, 3.4.2 and note 2), lead finish, marking, and the electrical, thermal and test requirements, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "16 pages, 0 scanned. SHA-256 b51d25ebdcf0.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,217 of 4,378 items agreed. All 36 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "771 checks on size series and limits. 24 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "14 pages of searchable text, 12 tables (1,324 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "104 solids in STEP AP242. 2,080 of 2,080 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Amendment 3 (all previous amendments incorporated), 29 May 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table IV, column 'Col 12 / \u03b1VZ / %/\u00b0C': 0.085 then 0.079. Page 11 prints +.085 and +.079; the printed +.085 for 1N3310 breaks the otherwise steady rise from +.081 (1N3309) to +.079, +.080 (1N3311 to 1N3313), and looks wrong for its series, a point for an engineer."
   ]
  },
  {
   "id": "MIL-PRF-22885/96F",
   "slug": "mil-prf-22885-96f",
   "title": "Switches, pushbutton, illuminated, 4-LAMP, RFI shielded",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-22885_96F Switches, pushbutton",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 1,
   "dimensions": 11,
   "dimensions_met": 11,
   "kind": "Performance specification sheet",
   "dated": "23 December 2025",
   "status": "Inactive, 23 December 2025",
   "newest": "Revision F, 23 December 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 4,
   "by_class": {
    "Seawolf": 4
   },
   "stock_examples": [
    "6210-01-380-4315, light, indicator, M22885/96-X1Y (Seawolf)",
    "6210-01-414-3513, light, indicator, M22885/96-S1R (Seawolf)",
    "6220-01-420-3392, lens, light, M22885/96-X1A (Seawolf)",
    "6210-01-430-8935, light, indicator, M22885/96-X4YG (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-22885_96F package.pdf",
    "scan": "MIL-PRF-22885_96F legacy scan.pdf",
    "clean": "MIL-PRF-22885_96F clean copy.pdf",
    "record": "MIL-PRF-22885_96F validation record.pdf",
    "sheet": "MIL-PRF-22885_96F 3D model.pdf",
    "parts": "MIL-PRF-22885_96F parts list.pdf",
    "inspection": "MIL-PRF-22885_96F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M22885_96-A6RGY-freecad.png",
    "pair": "Models/views/M22885_96-A6RGY-pair.png",
    "record": "Models/views/M22885_96-A6RGY-record.png",
    "front": "Models/views/M22885_96-A6RGY-front.png",
    "top": "Models/views/M22885_96-A6RGY-top.png",
    "right": "Models/views/M22885_96-A6RGY-right.png",
    "cut": "Models/views/M22885_96-A6RGY-cut.png"
   },
   "shown_part": "M22885/96-A6RGY",
   "application": "FreeCAD 1.1.4",
   "modeled": "One envelope solid, M22885/96-A6RGY, standing for every part number: a .750 SQ base prism from the lamp terminal ends to the .875 SQ by .020 flange, and the .700 SQ cap whose face stands .200 in front of the flange rear face, 2.470 MAX from the terminal ends.",
   "not_modeled": [
    "Separate solids for each part number: the 20 circuit codes of table IV, the 9 lens style codes of table V and the 5 lens colors of table III allow up to 3,780 combinations, and none changes the dimensions of figure 1.",
    "The switch-body-only items (table V codes 3, 5, 7, 9) and the cap-assembly-only item (table IV code X), since figure 1 does not dimension where the cap assembly ends inside the base.",
    "The mounting sleeve and the two mounting cams, which figure 1 draws behind the panel without dimensions.",
    "The .016 moisture seal and RFI gasket under the flange, so that the flange rear face carries the 2.470 MAX and .200 \u00b1.030 dimensions; it is used only to place the panel in the cutout check.",
    "The lamp terminals, basic switches (MIL-PRF-8805/4) and back plate inside the base envelope, the rounded front edges of the cap, the lens plate, lens segments and RFI screen, and the four T-1-3/4 lamps.",
    "The film legend of .645 x .645 \u00b1 .010 x .004 \u00b1 .001 (available legend area .600 square) and the .12 pound maximum weight."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 0 scanned. SHA-256 b988f19305ab.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "919 of 943 items agreed. All 19 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "35 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 7 tables (257 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "1 solid in STEP AP242. 11 of 11 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision F, 23 December 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 does not dimension the mounting sleeve or the two mounting cams, so the space the switch needs behind the panel beyond the .750 SQ base is not fixed by this document."
   ]
  },
  {
   "id": "MIL-PRF-27/103E w/AMENDMENT 3",
   "slug": "mil-prf-27-103e-w-amendment-3",
   "title": "Transformer, audio frequency",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-27_103E w_AMENDMENT 3 Transformer, audio frequency",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 16,
   "dimensions": 240,
   "dimensions_met": 240,
   "kind": "Performance specification sheet",
   "dated": "20 June 2024",
   "status": "Active, 20 June 2024",
   "newest": "Revision E Amendment 3 (all previous amendments incorporated), 20 June 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5950-01-133-5548, transformer, audio frequency, M27/103-12 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-27_103E w_AMENDMENT 3 package.pdf",
    "scan": "MIL-PRF-27_103E w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MIL-PRF-27_103E w_AMENDMENT 3 clean copy.pdf",
    "record": "MIL-PRF-27_103E w_AMENDMENT 3 validation record.pdf",
    "sheet": "MIL-PRF-27_103E w_AMENDMENT 3 3D model.pdf",
    "parts": "MIL-PRF-27_103E w_AMENDMENT 3 parts list.pdf",
    "inspection": "MIL-PRF-27_103E w_AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M27_103-03-freecad.png",
    "pair": "Models/views/M27_103-03-pair.png",
    "record": "Models/views/M27_103-03-record.png",
    "front": "Models/views/M27_103-03-front.png",
    "top": "Models/views/M27_103-03-top.png",
    "right": "Models/views/M27_103-03-right.png",
    "cut": "Models/views/M27_103-03-cut.png"
   },
   "shown_part": "M27/103-03",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 16 audio frequency transformers M27/103-01 to -16, which share the Figure 1 outline: a .360 diameter case .406 high with a .125 diameter key and moisture barrier offset .035 high on the bottom and .016 diameter leads 1.000 long, six leads for the 11 circuit diagram A parts and seven for the 5 circuit diagram B parts.",
   "not_modeled": [
    "The optional .031 \u00b1.002 radius of the key and moisture barrier offset, and any key form beyond the round offset, which Figure 1 does not dimension.",
    "The shorter lead option of note 8 (.125 \u00b1.010 inch from the moisture barrier offset).",
    "The windings, core and encapsulant inside the case, the side marking of note 3, and the tin-lead plating (type D-4 of MIL-STD-1276) of the Dumet leads.",
    "The 0.11 ounce maximum weight and the electrical, environmental and supersession requirements of Tables I, II and III, which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 204154992ce3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "797 of 802 items agreed. All 4 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "64 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 4 tables (236 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "16 solids in STEP AP242. 240 of 240 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 3 (all previous amendments incorporated), 20 June 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The document prints no terminal circle diameter (note 4 refers the spacing to the TO-76 outline); the model derives .178 from F = .063 and the 45\u00b0 of note 5, which an engineer should confirm against TO-76.",
    "Model. Figure 1 does not tie E (.125 \u00b1.010 Dia.) plainly to one feature, as its leader in the bottom view ends at the outer circle that A (.360 Dia. Max.) sizes; the model reads E as the diameter of the key and moisture barrier offset, which the side view draws as a centered step about a third of the case width.",
    "Model. The lead length is 1.000 \u00b1.250 as D in the Figure 1 table, drawn from the case bottom, but 1.000 \u00b1.025 under Terminals on page 2, and note 8 measures short leads from the moisture barrier offset; the model's 1.000 from the case bottom meets both, and the governing tolerance and datum should be confirmed."
   ]
  },
  {
   "id": "MIL-PRF-27/357D AMENDMENT 1",
   "slug": "mil-prf-27-357d-amendment-1",
   "title": "Transformers, audio frequency, ultra-miniature",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-27_357D AMENDMENT 1 Transformers, audio frequency",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 114,
   "dimensions": 2394,
   "dimensions_met": 2394,
   "kind": "Performance specification sheet",
   "dated": "27 June 2018",
   "status": "Active, 10 April 2023",
   "newest": "Revision D Notice 1 - Validation, 10 April 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Seawolf": 2
   },
   "stock_examples": [
    "5950-01-508-6681, transformer, audio frequency, M27/357-035 (Seawolf)",
    "5950-01-508-6685, transformer, audio frequency, M27/357-017 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-27_357D AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-27_357D AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-27_357D AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-27_357D AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-27_357D AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-27_357D AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-27_357D AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M27_357-057-freecad.png",
    "pair": "Models/views/M27_357-057-pair.png",
    "record": "Models/views/M27_357-057-record.png",
    "front": "Models/views/M27_357-057-front.png",
    "top": "Models/views/M27_357-057-top.png",
    "right": "Models/views/M27_357-057-right.png",
    "cut": "Models/views/M27_357-057-cut.png"
   },
   "shown_part": "M27/357-057",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 114 ultra-miniature audio frequency transformers M27/357-001 to -114, which share the one Figure 1 outline: a .500 diameter case .350 high with a .218 diameter standoff .020 high on the bottom and seven .016 diameter solid wire terminals 1.00 long on a .350 diameter circle (101 configuration A and 13 configuration B parts).",
   "not_modeled": [
    "The windings, core and encapsulation inside the case, and the electrostatic shield of the configuration B parts (Table I footnote 2).",
    "The white dot at terminal 1, the side marking of notes 3 and 4, the copper clad steel composition of the terminals and their tin-lead finish.",
    "The 5 gram maximum weight and the electrical, environmental and test requirements of page 3, page 8 and Table I, which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 0 scanned. SHA-256 23424d529b37.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,829 of 1,861 items agreed. All 22 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "444 checks on size series and limits. 29 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (1,272 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "114 solids in STEP AP242. 2,394 of 2,394 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 10 April 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, column 'Primary dc resistance (ohms)': 48 then 39. Page 4 prints 48 for 033 and 39 for 034. The page prints 39 clearly, but every other 500 ct part (032, 033, 035 to 038) prints 48 and 39 is below the 41 printed for the 400 ct parts, so the printed value looks wrong for its series and is a point for an engineer.",
    "Model. The bottom view marks terminals at six of the eight 45\u00b0 positions (lower left, left, upper left, upper right, lower right and bottom) and none at the top or right, while the side view draws terminals at both ends of the horizontal centerline and the note numbers seven terminals clockwise from terminal 1; the model fills the top and right positions and leaves the bottom one empty, which an engineer should confirm."
   ]
  },
  {
   "id": "MIL-PRF-28876/28E w/AMENDMENT 2",
   "slug": "mil-prf-28876-28e-w-amendment-2",
   "title": "Connectors, fiber optic, circular, plug and receptacle style, multiple removable termini, screw threads, 45-DEGREE backshell, environment resisting",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-28876_28E w_AMENDMENT 2 Connectors, fiber optic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 18,
   "dimensions": 198,
   "dimensions_met": 198,
   "kind": "Performance specification sheet",
   "dated": "5 March 2026",
   "status": "Active, 5 March 2026",
   "newest": "Revision E Amendment 2 (all previous amendments incorporated), 5 March 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "6060-01-517-0997, connector, receptacle, fiber optic, M28876/28C3 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-28876_28E w_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-28876_28E w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-28876_28E w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-28876_28E w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-28876_28E w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-28876_28E w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-28876_28E w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M28876_28B1L-freecad.png",
    "pair": "Models/views/M28876_28B1L-pair.png",
    "record": "Models/views/M28876_28B1L-record.png",
    "front": "Models/views/M28876_28B1L-front.png",
    "top": "Models/views/M28876_28B1L-top.png",
    "right": "Models/views/M28876_28B1L-right.png",
    "cut": "Models/views/M28876_28B1L-cut.png"
   },
   "shown_part": "M28876/28B1L",
   "application": "FreeCAD 1.1.4",
   "modeled": "18 envelope solids, one per shell size and backshell designator that both Figure 1 and Table I define, each standing for class blank and class T: two straight legs of diameter B max meeting at a mitred 45-degree turn, sized so the overall length is A max and the overall height is C max, with a cable passage at the largest cable diameter of the designator's range.",
   "not_modeled": [
    "The internal configuration and the coupling interface, including the coupling nut thread, which note 4 sends to figure A-7 of MIL-PRF-28876, and the M DIA dimensioning that footnote 1 sends to MIL-PRF-28876/8.",
    "The separate coupling nut, body and knurled nut, the radius of the bend, and the steps, tapers, wrench flats, knurling and marking drawn in Figure 1, none of which the sheet dimensions.",
    "The cable retainer with heatshrink that Figure 1 draws past the knurled nut, outside A and C and not dimensioned.",
    "The cable seal and its grip on the smallest cable of each range, and the requirement that the backshell hold the mated insert in position.",
    "M28876/28C4L and M28876/28C4, which Table I lists without an A, B or C in Figure 1, and shell size 23 backshell designator 3, which Figure 1 dimensions without a Table I cable range.",
    "Classes blank and T, which set the aluminum finish (Table II) and do not change the shape.",
    "The 6.4 ounce maximum weight, which a solid filled to its outside envelope does not represent."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 1 scanned. SHA-256 1ef38a2e94ec.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "433 of 447 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "16 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 3 tables (101 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "18 solids in STEP AP242. 198 of 198 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 2 (all previous amendments incorporated), 5 March 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table I lists backshell designators 4L and 4 for shell size 15 (cable 0.305 to 0.346), but the Figure 1 table gives A, B and C for shell size 15 only for 1L, 2L, 3L and 1, 2, 3, so M28876/28C4L and M28876/28C4 have no envelope and are not modeled.",
    "Model. The Figure 1 table gives A 6.30 max, B 2.25 max and C 4.2 max for shell size 23 backshell designators 1, 2 and 3, but Table I lists only designators 1 and 2 for shell size 23, so designator 3 has no cable range or PIN and is not modeled."
   ]
  },
  {
   "id": "MIL-PRF-39003/2K",
   "slug": "mil-prf-39003-2k",
   "title": "Capacitor, fixed, electrolytic (solid electrolyte), tantalum (polarized, sintered slug), established reliability, style CSR09",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-39003_2K Capacitor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 4,
   "dimensions": 52,
   "dimensions_met": 52,
   "kind": "Performance specification sheet",
   "dated": "16 May 2022",
   "status": "Active, 16 May 2022",
   "newest": "Revision K, 16 May 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5910-01-485-7311, capacitor, fixed, electrolytic, M39003/02-4039 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-39003_2K package.pdf",
    "scan": "MIL-PRF-39003_2K legacy scan.pdf",
    "clean": "MIL-PRF-39003_2K clean copy.pdf",
    "record": "MIL-PRF-39003_2K validation record.pdf",
    "sheet": "MIL-PRF-39003_2K 3D model.pdf",
    "parts": "MIL-PRF-39003_2K parts list.pdf",
    "inspection": "MIL-PRF-39003_2K inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39003_02_case_B1-freecad.png",
    "pair": "Models/views/M39003_02_case_B1-pair.png",
    "record": "Models/views/M39003_02_case_B1-record.png",
    "front": "Models/views/M39003_02_case_B1-front.png",
    "top": "Models/views/M39003_02_case_B1-top.png",
    "right": "Models/views/M39003_02_case_B1-right.png",
    "cut": "Models/views/M39003_02_case_B1-cut.png"
   },
   "shown_part": "M39003/02 case B1",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style CSR09 capacitor, one per case size A1 and B1 at each of the two lead lengths: a round case of diameter D and length L with square ends, and a lead of diameter .016 on the axis out of each end, 1.500 long for figure 1 and 1.000 long for tape and reel (note 5).",
   "not_modeled": [
    "Each of the 752 PINs of table I (94 ratings at 8 failure rate levels) as its own solid: they share the outline of their case size, so one solid stands for each case size at each lead length (368 A1, 384 B1).",
    "The inside of the capacitor (the sintered tantalum slug, the solid electrolyte, the hermetic seal and the case wall): each solid is the outside shape as one body.",
    "The case insulation as a separate sleeve and its extension of .015 min beyond each end of the case, or the lap over the ends of a shrink-fitted sleeve (note 4).",
    "The + polarity mark, marking, the surge current and solder letter of the PIN, gold plating of the leads, and the electrical ratings and tests, none of which the outline shows."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 362babdd842b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,433 of 2,468 items agreed. All 24 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "744 checks on size series and limits. 24 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (1,706 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 52 of 52 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K, 16 May 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Note 4 has the case insulation extend .015 min beyond each end, but figure 1 does not say whether D and L are taken over that insulation or over the metal case."
   ]
  },
  {
   "id": "MIL-PRF-39014/22G",
   "slug": "mil-prf-39014-22g",
   "title": "Capacitor, fixed, ceramic dielectric (general purpose), established reliability, styles CKR22, CKR23, and CKR24",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-39014_22G Capacitor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 11,
   "solids": 6,
   "dimensions": 162,
   "dimensions_met": 162,
   "kind": "Performance specification sheet",
   "dated": "25 April 2025",
   "status": "Active, 25 April 2025",
   "newest": "Revision G, 25 April 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5910-01-485-7313, capacitor, fixed, ceramic dielectr, M39014/22-1157 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-39014_22G package.pdf",
    "scan": "MIL-PRF-39014_22G legacy scan.pdf",
    "clean": "MIL-PRF-39014_22G clean copy.pdf",
    "record": "MIL-PRF-39014_22G validation record.pdf",
    "sheet": "MIL-PRF-39014_22G 3D model.pdf",
    "parts": "MIL-PRF-39014_22G parts list.pdf",
    "inspection": "MIL-PRF-39014_22G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39014_22-3258-freecad.png",
    "pair": "Models/views/M39014_22-3258-pair.png",
    "record": "Models/views/M39014_22-3258-record.png",
    "front": "Models/views/M39014_22-3258-front.png",
    "top": "Models/views/M39014_22-3258-top.png",
    "right": "Models/views/M39014_22-3258-right.png",
    "cut": "Models/views/M39014_22-3258-cut.png"
   },
   "shown_part": "M39014/22-3258",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the three styles in Figure 1 (CKR22, CKR23 and CKR24), each at the standard and the optional lead length: a molded body .260 long, tapered from .092 thick at the top to .090 at the bottom, A high for its style, with a flat .012 lead leaving each end and bent down at 95\u00b0 to tips .325 apart, each built under the first dash number of its Table III group.",
   "not_modeled": [
    "The other 2,302 of the 2,308 Table III dash numbers: they differ only in capacitance, tolerance, voltage, characteristic and failure rate level, so each shares the outline of the solid for its style and lead length.",
    "The capacitor inside the molded case (ceramic element, terminations and lead joints), which the sheet does not draw; the body is solid, with the leads joined to its end faces.",
    "Note 7, nonconductive material on the leads up to .030 from the body, and note 6, the .300 \u00b1.010 mounting hole spacing, which is a board layout requirement.",
    "The dashed lead outlines of Figure 1, the marking (minimum marking 0001T801), and the electrical, environmental and reliability requirements, which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "11 pages, 0 scanned. SHA-256 67cd7b868ffa.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,326 of 4,291 items agreed. All 45 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "4,569 checks on size series and limits. 246 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "13 pages of searchable text, 6 tables (3,373 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "6 solids in STEP AP242. 162 of 162 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G, 25 April 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table III, column 'Dash number Failure rate level (%/1,000 hours) / Optional longer lead length 1/ / 1.0(M)': 3087 then 3038. Scan page 6 prints 3038 in the optional 1.0(M) column of row 0088, the same number as row 0038; the series gives 3088, so the printed value looks wrong and is a point for an engineer.",
    "Printed value to confirm. Table III, column 'Dash number Failure rate level (%/1,000 hours) / Optional longer lead length 1/ / 0.1(P)': 3387 then 3338. Scan page 6 prints 3338 in the optional 0.1(P) column of row 0088, the same number as row 0038; the series gives 3388, so the printed value looks wrong and is a point for an engineer.",
    "Printed value to confirm. Table III, column 'Dash number Failure rate level (%/1,000 hours) / Optional longer lead length 1/ / 0.01(R)': 3687 then 3638. Scan page 6 prints 3638 in the optional 0.01(R) column of row 0088, the same number as row 0038; the series gives 3688, so the printed value looks wrong and is a point for an engineer.",
    "Printed value to confirm. Table III, column 'Dash number Failure rate level (%/1,000 hours) / Optional longer lead length 1/ / 0.001(S)': 3928 then 2931. Scan page 5 prints 2931 in the optional 0.001(S) column of row 0031; the series gives 3931, so the printed value looks wrong and is a point for an engineer.",
    "Printed value to confirm. Table III, column 'Dash number Failure rate level (%/1,000 hours) / Optional longer lead length 1/ / 0.001(S)': 3987 then 3938. Scan page 6 prints 3938 in the optional 0.001(S) column of row 0088, the same number as row 0038; the series gives 3988, so the printed value looks wrong and is a point for an engineer.",
    "Model. The metric equivalents list on page 2 gives .165 (4.19 mm) and .185 (4.70 mm), which no dimension on the sheet uses, and omits .175 and .195, the B values the Dimensions table prints for CKR22 and CKR23; the solids use .175 and .195."
   ]
  },
  {
   "id": "MIL-PRF-39016/42F w/AMENDMENT 1",
   "slug": "mil-prf-39016-42f-w-amendment-1",
   "title": "Relays, electromagnetic, established reliability, dpdt, low level to 1.0 ampere with internal diode for coil transient suppression, terminals .100-INCH grid pattern (sensitive 60 milliwatts, coil operate power at 25\u00b0C)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-39016_42F w_AMENDMENT 1 Relays, electromagnetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 11,
   "solids": 40,
   "dimensions": 560,
   "dimensions_met": 560,
   "kind": "Performance specification sheet",
   "dated": "13 October 2023",
   "status": "Active, 13 October 2023",
   "newest": "Revision F Amendment 1 (amendment incorporated), 13 October 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5945-01-485-7239, relay, electromagnetic, M39016/42-065M (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-39016_42F w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-39016_42F w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-39016_42F w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-39016_42F w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-39016_42F w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-39016_42F w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-39016_42F w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39016_42-057-freecad.png",
    "pair": "Models/views/M39016_42-057-pair.png",
    "record": "Models/views/M39016_42-057-record.png",
    "front": "Models/views/M39016_42-057-front.png",
    "top": "Models/views/M39016_42-057-top.png",
    "right": "Models/views/M39016_42-057-right.png",
    "cut": "Models/views/M39016_42-057-cut.png"
   },
   "shown_part": "M39016/42-057",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of all 40 dash numbers M39016/42-033 to -072 of Table I: the .335 square by .375 high relay can on its .375 square header with the index tab and eight .017 leads on the .100 grid, at the Table I lead length (.500 min or .187 \u00b1.010), with the Figure 2 spacer mounting pad and the case grounding pin where Table I calls for them.",
   "not_modeled": [
    "The failure rate suffix letters L, M, P and R that complete each part number; they do not change the geometry, so each dash number has one solid, and dash numbers that differ only in coil voltage share one shape.",
    "Corner radii of the can top and the header, which are drawn round but not dimensioned; all are left sharp.",
    "The glass seal beads drawn around each lead in the terminal views, the welded joint of the grounding pin, the lead break in the side views, and lead end shape.",
    "The circuit diagram, plus sign and part marking (notes 5 to 7), the terminal designations (reference only, note 4), the polyester film material of the pad (note 8 of Figure 2), and the internal coil, diode and contacts.",
    "The 4.3 gram maximum weight, which the solids cannot show without material densities."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "11 pages, 0 scanned. SHA-256 583ead899213.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,929 of 1,947 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "306 checks on size series and limits. 11 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 8 tables (488 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "40 solids in STEP AP242. 560 of 560 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 1 (amendment incorporated), 13 October 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table I heads the -033 to -040 column 'Lead strength .500 Min.', which reads as a misprint for lead length; the model uses a .500 minimum lead length, as Figure 1 refers the lead length to Table I and the -057 to -064 column reads 'Lead length .500 min'.",
    "Model. Figures 1 and 2 give no diameter or length for the case grounding pin of dash numbers -057 to -072; the model uses the .017 lead diameter and the lead length.",
    "Model. The Figure 2 metric table gives .047 inch as 1.93 mm, which is .076 inch; .047 inch is 1.19 mm, and the model uses the inch callout .047 \u00b1.005."
   ]
  },
  {
   "id": "MIL-PRF-39018/3J",
   "slug": "mil-prf-39018-3j",
   "title": "Capacitor, fixed, electrolytic (aluminum oxide) (polarized), non-established reliability and established reliability, styles CU16 (uninsulated), CU17 (insulated), and CUR17 (insulated)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-39018_3J Capacitor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 11,
   "solids": 42,
   "dimensions": 504,
   "dimensions_met": 504,
   "kind": "Performance specification sheet",
   "dated": "3 October 2022",
   "status": "Active, 3 October 2022",
   "newest": "Revision J, 3 October 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5910-01-485-7317, capacitor, fixed, electrolytic, M39018/03-1090P (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-39018_3J package.pdf",
    "scan": "MIL-PRF-39018_3J legacy scan.pdf",
    "clean": "MIL-PRF-39018_3J clean copy.pdf",
    "record": "MIL-PRF-39018_3J validation record.pdf",
    "sheet": "MIL-PRF-39018_3J 3D model.pdf",
    "parts": "MIL-PRF-39018_3J parts list.pdf",
    "inspection": "MIL-PRF-39018_3J inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39018_03_case_E4_CU17_and_CUR17-freecad.png",
    "pair": "Models/views/M39018_03_case_E4_CU17_and_CUR17-pair.png",
    "record": "Models/views/M39018_03_case_E4_CU17_and_CUR17-record.png",
    "front": "Models/views/M39018_03_case_E4_CU17_and_CUR17-front.png",
    "top": "Models/views/M39018_03_case_E4_CU17_and_CUR17-top.png",
    "right": "Models/views/M39018_03_case_E4_CU17_and_CUR17-right.png",
    "cut": "Models/views/M39018_03_case_E4_CU17_and_CUR17-cut.png"
   },
   "shown_part": "M39018/03 case E4 CU17 and CUR17",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the styles CU16, CU17 and CUR17 capacitors, one per case size D1 to F7 for the bare CU16 case and one for the insulated CU17 and CUR17 case: a round body of diameter D and length L with square ends, and a lead on the axis out of each end, .035 in diameter on the .625 diameter cases and .043 on the others, 2.50 long from the end of the body.",
   "not_modeled": [
    "Every one of the 790 dash numbers of table I (196 CU16, 198 CU17, 396 CUR17), with the H letter of CU17, the failure rate letter M, P, R or S of CUR17 and the R for random vibration: they share the outline of their case size and insulation, so one solid stands for each case size bare and insulated.",
    "The inside of the capacitor (the aluminum foil element, the electrolyte, the seals and the metal case wall): each solid is the outside shape as one body.",
    "The insulating sleeve and the epoxy or polymer coating as separate bodies; both are merged into the body, which L includes.",
    "The rounded shapes drawn where the leads leave the ends, the optional configuration drawn dashed at the positive end and the optional vent, all drawn without dimensions.",
    "Marking, the polarity marks and the electrical ratings and tests of table I, none of which change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "11 pages, 0 scanned. SHA-256 2acd40321f22.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,028 of 4,457 items agreed. All 407 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "2,650 checks on size series and limits. 179 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "14 pages of searchable text, 5 tables (3,246 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "42 solids in STEP AP242. 504 of 504 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J, 3 October 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, column 'Impedance (max) at -55\u00b0C and 120 Hz / \u03a9': 5 then 9.3. Page 3 prints 5 for the 7 V, 680 uF rating and 9.3 for 7 V, 1,000 uF. The printed 5 looks wrong for its series: impedance in the 7 V group falls in proportion to capacitance (9.3, 6.2, 4.2 for 1,000, 1,500, 2,200 uF), which puts 680 uF near 13.7, and the 10 V and 15 V groups are lower than the 7 V group at the same capacitance. A point for an engineer.",
    "Printed value to confirm. Table I, column 'DC leakage / +105\u00b0C / \u00b5A': 519 then 424. Page 4 prints 519 for the 200 V, 100 uF rating and 424 for 200 V, 150 uF. The printed values look swapped: elsewhere the +105 C leakage is about six times the +25 C leakage (27/164, 41/244, 59/354), and here the +25 C values are 70 and 86, which give about 420 and 516; the same table pairs 70 uA with 424 and 86 uA with 519 in the 10 V and 30 V groups. A point for an engineer.",
    "Model. Figure 1 gives the 2.50 \u00b1.250 lead length on the negative lead only and no length for the positive lead.",
    "Model. Note 5 limits D for CU17 and CUR17 to .008 over the specified bare case diameter but does not say whether that is the table nominal or the bare case as made within its \u00b1.015, so the largest insulated D of a .625 case is either .633 or .648.",
    "Model. Table I prints CU16 dash number 0545 on two rows, 75 V 100 \u00b5F (case D3) and 75 V 150 \u00b5F (case D5), so M39018/03-0545 has two case sizes; table II pairs 0546, not 0545, with 0446, the -10 +30 dash number of the second row.",
    "Model. The metric equivalents list on page 2 gives 2.238 (56.85 mm), which no dimension on the sheet uses, and omits 2.328, the L max the figure 1 table prints for cases E1 to E4 (L min 2.125, and L max is L min plus .203 on every case); the solids use 2.328."
   ]
  },
  {
   "id": "MIL-PRF-49142/9D w/AMENDMENT 4",
   "slug": "mil-prf-49142-9d-w-amendment-4",
   "title": "Connector, triaxial, radio frequency, (series trt (cabled) receptacle, socket contact, jamnut mounted, class 2)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-49142_9D w_AMENDMENT 4 Connector, triaxial",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 24,
   "dimensions": 456,
   "dimensions_met": 456,
   "kind": "Performance specification sheet",
   "dated": "13 May 2022",
   "status": "Active, 13 May 2022",
   "newest": "Revision D Amendment 4 (all previous amendments incorporated), 13 May 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5935-01-522-4954, connector, receptacle, electrical, M49142/09-0001 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-49142_9D w_AMENDMENT 4 package.pdf",
    "scan": "MIL-PRF-49142_9D w_AMENDMENT 4 legacy scan.pdf",
    "clean": "MIL-PRF-49142_9D w_AMENDMENT 4 clean copy.pdf",
    "record": "MIL-PRF-49142_9D w_AMENDMENT 4 validation record.pdf",
    "sheet": "MIL-PRF-49142_9D w_AMENDMENT 4 3D model.pdf",
    "parts": "MIL-PRF-49142_9D w_AMENDMENT 4 parts list.pdf",
    "inspection": "MIL-PRF-49142_9D w_AMENDMENT 4 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M49142_09-X023-freecad.png",
    "pair": "Models/views/M49142_09-X023-pair.png",
    "record": "Models/views/M49142_09-X023-record.png",
    "front": "Models/views/M49142_09-X023-front.png",
    "top": "Models/views/M49142_09-X023-top.png",
    "right": "Models/views/M49142_09-X023-right.png",
    "cut": "Models/views/M49142_09-X023-cut.png"
   },
   "shown_part": "M49142/09-X023",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-PRF-49142/9 jamnut mounted triaxial receptacle for all 24 dash numbers in Table I (X001 to X025; the table lists no X008), which share one shape: a 2.300 max rear body and .812 max flange, the .500-28 UNEF-2A mounting thread with its body D flat, the lock washer and jamnut on a mid-range panel, and the front section ending .796 to .843 ahead of the flange face.",
   "not_modeled": [
    "The series TRT socket interface of MIL-STD-348 (note 6): coupling thread, socket and intermediate contacts, dielectrics and bores; the front section and rear body are closed envelopes with no bore.",
    "The mounting seal, which the figure names but does not size, the internal teeth of the lock washer, the thread form and class, and the chamfers and rounded rear end the side view draws without sizes.",
    "The cable, ferrule and crimp termination of each dash number, and the material and plating options the X code selects in MIL-PRF-49142.",
    "The recommended panel cutout, which belongs to the panel; the sections ahead of the flange are checked to pass through it.",
    "The electrical, mechanical and environmental requirements (impedance, voltage, torque, contact forces, retention, durability), which are performance values."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 52b8417b9790.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,042 of 1,127 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "36 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 6 tables (190 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "24 solids in STEP AP242. 456 of 456 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Amendment 4 (all previous amendments incorporated), 13 May 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The figure gives the jamnut .613/.625 across flats, but the inch-mm table beside it lists .620 (15.75 mm) and neither .613 nor .625; the solid's .619 meets both readings, but an engineer should confirm which value governs.",
    "Model. The sheet gives no flange thickness, rear body diameter, thread length or front section diameter and sends the mating interface to MIL-STD-348 series TRT, which is not in the package; take those from MIL-STD-348 before using the solids for mating or fit checks."
   ]
  },
  {
   "id": "MIL-PRF-55310/16K",
   "slug": "mil-prf-55310-16k",
   "title": "Oscillator, crystal controlled, type 1 (crystal oscillator (XO)), 0.1 Hz through 80 MHz, hermetic seal, square wave, ttl",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-55310_16K Oscillator, crystal controlled",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 20,
   "dimensions": 260,
   "dimensions_met": 260,
   "kind": "Performance specification sheet",
   "dated": "18 December 2017",
   "status": "Active, 3 October 2022",
   "newest": "Revision K Notice 1 - Validation, 3 October 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5955-01-485-6773, oscillator, crystal controlled, M55310/16-B41A33M33300 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-55310_16K package.pdf",
    "scan": "MIL-PRF-55310_16K legacy scan.pdf",
    "clean": "MIL-PRF-55310_16K clean copy.pdf",
    "record": "MIL-PRF-55310_16K validation record.pdf",
    "sheet": "MIL-PRF-55310_16K 3D model.pdf",
    "parts": "MIL-PRF-55310_16K parts list.pdf",
    "inspection": "MIL-PRF-55310_16K inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M55310_16-_22_-freecad.png",
    "pair": "Models/views/M55310_16-_22_-pair.png",
    "record": "Models/views/M55310_16-_22_-record.png",
    "front": "Models/views/M55310_16-_22_-front.png",
    "top": "Models/views/M55310_16-_22_-top.png",
    "right": "Models/views/M55310_16-_22_-right.png",
    "cut": "Models/views/M55310_16-_22_-cut.png"
   },
   "shown_part": "M55310/16-*22*",
   "application": "FreeCAD 1.1.4",
   "modeled": "Twenty envelope solids of the 14 pin dual-in-line crystal oscillator package, one for each Table I dash number: a rectangular body .887 long and .54 wide, .20 high for the configuration A dash numbers and .265 high for configuration B, with two rows of seven .018 pins .300 apart standing .20 below the base, built to the figure 1 dimensions.",
   "not_modeled": [
    "The base flange and the narrower can above it, the rounded corners in plan and the rounded top edges, which figure 1 draws but does not dimension.",
    "The color dot or square corner that marks pin 1 and the standard marking on the top.",
    "The crystal, the oscillator circuit, the internal pin connections (note 4), the hermetic seal and the Table I electrical and frequency characteristics, which do not change the package.",
    "The 0.5 ounce maximum weight, which depends on materials the sheet does not give."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 0ea05dff6def.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "949 of 974 items agreed. All 11 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "94 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 6 tables (220 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "20 solids in STEP AP242. 260 of 260 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K Notice 1 - Validation, 3 October 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 limits only the pin 7 and 8 end of the body to .44 max from the middle pins, so a body centered on the pins can be no longer than .880 and reaches the .887 max length only if the pin 1 and 14 end sits .447 from the middle pins, a distance the sheet does not give; the engineer must say whether the pins are centered along the body."
   ]
  },
  {
   "id": "MIL-PRF-55310/18F w/AMENDMENT 1",
   "slug": "mil-prf-55310-18f-w-amendment-1",
   "title": "Oscillator, crystal controlled, type 1 (crystal oscillator (XO)), 0.01 Hz through 15.0 MHz, hermetic seal, square wave, cmos",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-55310_18F w_AMENDMENT 1 Oscillator, crystal controlled",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 10,
   "dimensions": 140,
   "dimensions_met": 140,
   "kind": "Performance specification sheet",
   "dated": "12 March 2020",
   "status": "Active, 31 December 2024",
   "newest": "Revision F Notice 2 - Validation, 31 December 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5955-01-485-6786, oscillator, crystal controlled, M55310/18-B41A3M686000 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-55310_18F w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-55310_18F w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-55310_18F w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-55310_18F w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-55310_18F w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-55310_18F w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-55310_18F w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M55310_18-_22_-freecad.png",
    "pair": "Models/views/M55310_18-_22_-pair.png",
    "record": "Models/views/M55310_18-_22_-record.png",
    "front": "Models/views/M55310_18-_22_-front.png",
    "top": "Models/views/M55310_18-_22_-top.png",
    "right": "Models/views/M55310_18-_22_-right.png",
    "cut": "Models/views/M55310_18-_22_-cut.png"
   },
   "shown_part": "M55310/18-*22*",
   "application": "FreeCAD 1.1.4",
   "modeled": "Ten envelope solids of the 14 pin dual-in-line crystal oscillator package, one for each Table I dash number: a rectangular body .887 long, .54 wide and .20 high with two rows of seven .018 pins, .100 apart in each row and .300 between rows, standing .20 below the base, built to the figure 1 dimensions A to M.",
   "not_modeled": [
    "The base flange and the narrower can above it, the rounded corners in plan and the rounded top edges, which figure 1 draws but does not dimension.",
    "The color dot or square corner that marks pin 1 (note 5), the ESD triangle (note 6) and the part marking.",
    "The crystal, the oscillator circuit, the internal pin connections (note 4), the hermetic seal and the Table I electrical and frequency characteristics, which do not change the package.",
    "The 0.5 ounce maximum weight, which depends on materials the sheet does not give."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 9903db4376fb.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "913 of 926 items agreed. All 11 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "79 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 4 tables (212 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "10 solids in STEP AP242. 140 of 140 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Notice 2 - Validation, 31 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 limits only the pin 7 and 8 end of the body to B .44 max from the middle pins, so a body centered on the pins can be no longer than .880 and reaches the A .887 max length only if the pin 1 and 14 end sits .447 from the middle pins, a distance the sheet does not give; the engineer must say whether the pins are centered along the body."
   ]
  },
  {
   "id": "MIL-PRF-55310/20F W/AMENDMENT 1",
   "slug": "mil-prf-55310-20f-w-amendment-1",
   "title": "Oscillator, crystal controlled, type 1 (crystal oscillator (XO)), 40.0 kHz through 60.0 MHz, hermetic seal, square wave, ttl",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-55310_20F W_AMENDMENT 1 Oscillator, crystal controlled",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 1,
   "dimensions": 27,
   "dimensions_met": 27,
   "kind": "Performance specification sheet",
   "dated": "19 April 2022",
   "status": "Active, 19 April 2022",
   "newest": "Revision F Amendment 1 (amendment incorporated), 19 April 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Seawolf": 2
   },
   "stock_examples": [
    "5955-01-485-6812, oscillator, crystal controlled, M55310/20-B01A1M320000 (Seawolf)",
    "5955-01-485-6824, oscillator, crystal controlled, M55310/20-B01A1M400000 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-55310_20F W_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-55310_20F W_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-55310_20F W_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-55310_20F W_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-55310_20F W_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-55310_20F W_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-55310_20F W_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M55310_20-freecad.png",
    "pair": "Models/views/M55310_20-pair.png",
    "record": "Models/views/M55310_20-record.png",
    "front": "Models/views/M55310_20-front.png",
    "top": "Models/views/M55310_20-top.png",
    "right": "Models/views/M55310_20-right.png",
    "cut": "Models/views/M55310_20-cut.png"
   },
   "shown_part": "M55310/20",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid of the figure 1 leadless package, M55310/20, standing for every PIN: a .650 square body with three .040 X 45\u00b0 corner chamfers and the .020 X 45\u00b0 index corner, a .472 square lid on top to the .085 maximum height, and 44 pads (11 per edge on the .050 pitch, the pin 1 index pad .085 long) marked on the mounting face.",
   "not_modeled": [
    "The castellations that the top view draws as a scalloped edge and the side view as metallized slots at each pad, which carry no dimension: the sides are flat.",
    "Pad and lid metallization thickness and the seal ring: each pad is a face of the mounting face with no thickness.",
    "The inside of the package (crystal, oscillator circuit, internal connection of the NC pads under note 4): the solid is the outside shape as one body.",
    "Marking on the lid, the 4 gram maximum weight, the hermetic seal, and the electrical and environmental requirements of Table I and pages 2 and 3, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 68b79c71198f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "794 of 796 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "37 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (139 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "1 solid in STEP AP242. 27 of 27 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 1 (amendment incorporated), 19 April 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 draws 11 pads on each edge (the .500 SQ row span on the .050 pitch) and labels pins 12 and 34 at the middles of opposite edges, 22 places apart, so the drawing numbers 44 pads, but the pin function table lists pins 1 to 42 only and the two pads between pin 42 and pin 1 have no number or function; the solid carries all 44 pads as drawn."
   ]
  },
  {
   "id": "MIL-PRF-55681/7D",
   "slug": "mil-prf-55681-7d",
   "title": "Capacitor, chip, multiple layer, fixed, ceramic dielectric, established reliability and non-established reliability, style CDR31, metric",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-55681_7D Capacitor, chip",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 2,
   "dimensions": 38,
   "dimensions_met": 38,
   "kind": "Performance specification sheet",
   "dated": "24 March 2025",
   "status": "Active, 24 March 2025",
   "newest": "Revision D, 24 March 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5910-01-485-7307, capacitor, fixed, ceramic dielectr, MIL-PRF-55681/7 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-55681_7D package.pdf",
    "scan": "MIL-PRF-55681_7D legacy scan.pdf",
    "clean": "MIL-PRF-55681_7D clean copy.pdf",
    "record": "MIL-PRF-55681_7D validation record.pdf",
    "sheet": "MIL-PRF-55681_7D 3D model.pdf",
    "parts": "MIL-PRF-55681_7D parts list.pdf",
    "inspection": "MIL-PRF-55681_7D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/CDR31_note_3-freecad.png",
    "pair": "Models/views/CDR31_note_3-pair.png",
    "record": "Models/views/CDR31_note_3-record.png",
    "front": "Models/views/CDR31_note_3-front.png",
    "top": "Models/views/CDR31_note_3-top.png",
    "right": "Models/views/CDR31_note_3-right.png",
    "cut": "Models/views/CDR31_note_3-cut.png"
   },
   "shown_part": "CDR31 note 3",
   "application": "FreeCAD 1.1.4",
   "modeled": "Two envelope solids of the style CDR31 multilayer ceramic chip capacitor, each a rectangular chip 2.00 mm long and 1.25 mm wide with a 0.50 mm termination band at each end and a 1.00 mm gap between the bands, 1.30 mm thick for bare chip terminations and 1.60 mm thick for solder coated terminations (note 3), each standing for all 89 PINs of table I.",
   "not_modeled": [
    "The small step that Figure 1 draws between the ceramic body and the termination caps, which the document does not dimension; body and terminations are one flush block.",
    "The termination thickness and the internal electrode layers of the chip.",
    "Capacitance, capacitance tolerance, characteristic and rated voltage (table I), operating temperature, product level and marking, none of which change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 a94375378356.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "747 of 752 items agreed. All 8 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "188 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (459 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 38 of 38 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D, 24 March 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-55681/9D",
   "slug": "mil-prf-55681-9d",
   "title": "Capacitor, chip, multiple layer, fixed, ceramic dielectric, established reliability and non-established reliability, style CDR33, metric",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-55681_9D Capacitor, chip",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 2,
   "dimensions": 30,
   "dimensions_met": 30,
   "kind": "Performance specification sheet",
   "dated": "24 March 2025",
   "status": "Active, 24 March 2025",
   "newest": "Revision D, 24 March 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5910-01-485-7251, capacitor, fixed, ceramic dielectr, MIL-PRF-55681/9 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-55681_9D package.pdf",
    "scan": "MIL-PRF-55681_9D legacy scan.pdf",
    "clean": "MIL-PRF-55681_9D clean copy.pdf",
    "record": "MIL-PRF-55681_9D validation record.pdf",
    "sheet": "MIL-PRF-55681_9D 3D model.pdf",
    "parts": "MIL-PRF-55681_9D parts list.pdf",
    "inspection": "MIL-PRF-55681_9D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/CDR33_note_3-freecad.png",
    "pair": "Models/views/CDR33_note_3-pair.png",
    "record": "Models/views/CDR33_note_3-record.png",
    "front": "Models/views/CDR33_note_3-front.png",
    "top": "Models/views/CDR33_note_3-top.png",
    "right": "Models/views/CDR33_note_3-right.png",
    "cut": "Models/views/CDR33_note_3-cut.png"
   },
   "shown_part": "CDR33 note 3",
   "application": "FreeCAD 1.1.4",
   "modeled": "Two envelope solids of the style CDR33 multilayer ceramic chip capacitor, each a rectangular chip 3.20 mm long and 2.50 mm wide with a .50 mm termination band at each end, 1.50 mm thick for bare chip terminations and 1.80 mm thick for solder coated terminations (note 3), each standing for all 23 PINs of table I.",
   "not_modeled": [
    "The small step that Figure 1 draws between the ceramic body and the termination caps, which the document does not dimension; body and terminations are one flush block.",
    "The termination thickness and the internal electrode layers of the chip.",
    "Capacitance, capacitance tolerance, characteristic and rated voltage (table I), operating temperature, product level and marking, none of which change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 a53d8bd956f4.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "421 of 422 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "44 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (123 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 30 of 30 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D, 24 March 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-6855/4A w/AMENDMENT 1",
   "slug": "mil-prf-6855-4a-w-amendment-1",
   "title": "Rubber, synthetic, tubing",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-6855_4A w_AMENDMENT 1 Rubber, synthetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 240,
   "dimensions": 720,
   "dimensions_met": 720,
   "kind": "Performance specification sheet",
   "dated": "29 June 2022",
   "status": "Active, 29 June 2022",
   "newest": "Revision A Amendment 1 (amendment incorporated), 29 June 2022",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4720-01-429-9908, tubing, nonmetallic, M6855/4 (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-6855_4A w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-6855_4A w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-6855_4A w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-6855_4A w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-6855_4A w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-6855_4A w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-6855_4A w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {
    "iso": "Models/views/M6855_4-XXH143-freecad.png",
    "pair": "Models/views/M6855_4-XXH143-pair.png",
    "record": "Models/views/M6855_4-XXH143-record.png",
    "front": "Models/views/M6855_4-XXH143-front.png",
    "top": "Models/views/M6855_4-XXH143-top.png",
    "right": "Models/views/M6855_4-XXH143-right.png",
    "cut": "Models/views/M6855_4-XXH143-cut.png"
   },
   "shown_part": "M6855/4-XXH143",
   "application": "FreeCAD 1.1.4",
   "modeled": "Plain round synthetic rubber tubes: one tube for each of the 240 pairs of the 40 tubing sizes of Tables IIA, IIB and IIC (light, heavy and extra heavy wall) and the 6 tubing lengths of Table III (72.000 to 7200.000), each standing for all 42 Table I classification numbers at that size and length.",
   "not_modeled": [
    "Material: the 42 Table I classification numbers (type, class and grade) set the material requirements, not the shape, so the 10,080 part numbers come to 240 solids, each named M6855/4-XX followed by its tubing size number and length number, with XX for the classification number.",
    "The surface finish requirement (smooth and free from pin holes, flash or other imperfections).",
    "Physical properties and the inspection and test provisions, which the sheet takes from MIL-PRF-6855, Section 4."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 5186e8e7fc60.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "941 of 941 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "381 checks on size series and limits. 6 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 6 tables (588 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "240 solids in STEP AP242. 720 of 720 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Amendment 1 (amendment incorporated), 29 June 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-83446/8E w/AMENDMENT 2",
   "slug": "mil-prf-83446-8e-w-amendment-2",
   "title": "Coils, radio frequency, chip, fixed",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-PRF-83446_8E w_AMENDMENT 2 Coils, radio frequency",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 98,
   "dimensions": 1764,
   "dimensions_met": 1764,
   "kind": "Performance specification sheet",
   "dated": "28 May 2024",
   "status": "Active, 28 May 2024",
   "newest": "Revision E Amendment 2 (all previous amendments incorporated), 28 May 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5950-01-485-6838, coil, radio frequency, M83446/08-79F (Seawolf)"
   ],
   "files": {
    "package": "MIL-PRF-83446_8E w_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-83446_8E w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-83446_8E w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-83446_8E w_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-83446_8E w_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-83446_8E w_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-83446_8E w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M83446_08-50-freecad.png",
    "pair": "Models/views/M83446_08-50-pair.png",
    "record": "Models/views/M83446_08-50-record.png",
    "front": "Models/views/M83446_08-50-front.png",
    "top": "Models/views/M83446_08-50-top.png",
    "right": "Models/views/M83446_08-50-right.png",
    "cut": "Models/views/M83446_08-50-cut.png"
   },
   "shown_part": "M83446/08-50",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid chip coils for all 98 dash numbers: a block body with the optional top chamfers and two flush L-shaped lead frame terminations along the bottom long edges, with a tab beyond one end of each termination on dash numbers 01 to 49.",
   "not_modeled": [
    "The rounded corners drawn on the top and bottom views, which carry no dimension; the body corners are sharp.",
    "The taper drawn where each tab of dash numbers 01 to 49 meets its termination, which carries no dimension.",
    "Terminations other than the lead frame design on dash numbers 50 to 98 (the sheet's H applies to lead frame designs only).",
    "The 0.5 gram weight limit, termination finish and inductance tolerance codes, and the electrical, thermal and environmental requirements of Tables I and II.",
    "The test fixtures of Figures 2 and 3, which are drawn without dimensions."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 1 scanned. SHA-256 557c4870b463.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "781 of 823 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "414 checks on size series and limits. 22 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 4 tables (483 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "98 solids in STEP AP242. 1,764 of 1,764 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 2 (all previous amendments incorporated), 28 May 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 does not locate the tabs of dash numbers 01 to 49 across the width or dimension the taper that joins each tab to its termination: at nominal D (.030) and G (.038) the two tabs span .098 against an A of up to .110, so the drawing does not settle whether the tabs line up with the body sides, with the inner edges of the feet, or neither."
   ]
  },
  {
   "id": "MIL-R-6855/3",
   "slug": "mil-r-6855-3",
   "title": "Rubber, synthetic, rods (or rounds)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-R-6855_3 Rubber, synthetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 75,
   "dimensions": 150,
   "dimensions_met": 150,
   "kind": "Military specification sheet",
   "dated": "16 February 1987",
   "status": "Canceled, 1 June 2000",
   "newest": "Notice 2 - Cancellation, 1 June 2000",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "9390-01-432-6470, nonmetallic rod, MIL-R-6855/3-042410 (Seawolf)"
   ],
   "files": {
    "package": "MIL-R-6855_3 package.pdf",
    "scan": "MIL-R-6855_3 legacy scan.pdf",
    "clean": "MIL-R-6855_3 clean copy.pdf",
    "record": "MIL-R-6855_3 validation record.pdf",
    "sheet": "MIL-R-6855_3 3D model.pdf",
    "parts": "MIL-R-6855_3 parts list.pdf",
    "inspection": "MIL-R-6855_3 inspection report.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {
    "iso": "Models/views/M6855_3-XX3202-freecad.png",
    "pair": "Models/views/M6855_3-XX3202-pair.png",
    "record": "Models/views/M6855_3-XX3202-record.png",
    "front": "Models/views/M6855_3-XX3202-front.png",
    "top": "Models/views/M6855_3-XX3202-top.png",
    "right": "Models/views/M6855_3-XX3202-right.png",
    "cut": "Models/views/M6855_3-XX3202-cut.png"
   },
   "shown_part": "M6855/3-XX3202",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid round synthetic rubber rods: one right circular cylinder for each of the 75 pairs of the 15 outside diameters of Table II (0.156 to 1.500) and the 5 rod lengths of Table III (12.000 to 1800.000), each standing for all 42 Table I classification numbers at that size.",
   "not_modeled": [
    "Material: the 42 Table I classification numbers (type, class and grade) set the material requirements, not the shape, so the 3,150 part numbers come to 75 solids, each named M6855/3-XX followed by its OD and length numbers, with XX for the classification number.",
    "The OD tolerance, which the sheet takes from MIL-R-6855, Table III, and does not print; each OD is checked at its Table II value.",
    "Physical properties (MIL-R-6855, Tables IV and V) and the inspection and test provisions of MIL-R-6855, Section 4."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 6d70bf3ca32c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "403 of 403 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "115 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 4 tables (164 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "75 solids in STEP AP242. 150 of 150 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Notice 2 - Cancellation, 1 June 2000.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table II prints OD number 24 as 0.436, and the metric list's 11.07 mm matches it, but every other OD is a multiple of 1/32 inch rounded to three places and 7/16 is 0.4375; the OD number 24 solids are built at 0.436, and the engineer should confirm the diameter, because FLIS lists stock number 9390-01-432-6470 (Seawolf) against MIL-R-6855/3-042410, an OD number 24 rod."
   ]
  },
  {
   "id": "MIL-S-5626C",
   "slug": "mil-s-5626c",
   "title": "Steel: chrome-molybdenum (4140) bars, rods, and forging stock (for aircraft applications)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-S-5626C Steel-chrome-molybdenum, 4140 bars",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 11,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "17 JULY 1968",
   "status": "Canceled, 27 September 1995",
   "newest": "Revision C Notice 1 - Cancellation, 27 September 1995",
   "superseding": "SAE-AMS6382, AND SAE-AMS6349",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4820-01-452-1703, valve, bleeder, hydraulic system, MIL-S-5626 (Seawolf)"
   ],
   "files": {
    "package": "MIL-S-5626C package.pdf",
    "scan": "MIL-S-5626C legacy scan.pdf",
    "clean": "MIL-S-5626C clean copy.pdf",
    "record": "MIL-S-5626C validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "11 pages, all scanned. SHA-256 dcee905fad70.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,476 of 2,493 items agreed. 12 differences went to a third reader. A second pass settled 1 from a second printing in the document, 1 from a closer look at the page, 1 from the document's record in ASSIST. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "21 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 5 tables (84 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-S-5626C is a material specification for chrome-molybdenum (4140) steel bars, rods and forging stock of aircraft quality with no drawing: it gives the chemical composition and check analysis tolerances (Table I), hardenability, grain size, cleanliness, macrostructure, the maximum depth of decarburization by nominal size (Table II), hardness limits and the sampling plans (Tables III to V), leaves size and shape to the order (6.2(b)), and sets diameter and thickness tolerances by reference to Fed. Std. No. 48 (3.11.1), which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 1 - Cancellation, 27 September 1995. ASSIST also holds Revision C Amendment 1 (7 July 1972). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 6, 4.8.2, first sentence: read as zone, could be some."
   ]
  },
  {
   "id": "MIL-T-1368C",
   "slug": "mil-t-1368c",
   "title": "Tube and pipe, nickel-copper alloy, seamless and welded",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-T-1368C Tube and pipe, nickel-copper alloy",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 15,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "2 June 1965",
   "status": "Active, 29 December 2020",
   "newest": "Revision C Notice 3 - Validation, 29 December 2020",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 2,
   "by_class": {
    "Seawolf": 2
   },
   "stock_examples": [
    "4710-01-412-8134, pipe, bent, metallic, MIL-T-1368 (Seawolf)",
    "4710-01-412-8139, pipe, bent, metallic, MIL-T-1368 (Seawolf)"
   ],
   "files": {
    "package": "MIL-T-1368C package.pdf",
    "scan": "MIL-T-1368C legacy scan.pdf",
    "clean": "MIL-T-1368C clean copy.pdf",
    "record": "MIL-T-1368C validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, all scanned. SHA-256 9aaeea200df1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,024 of 3,039 items agreed. 17 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "266 checks on size series and limits. 7 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 10 tables (384 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-T-1368C is a material specification for nickel-copper alloy (Monel) seamless and welded tube and pipe, classes A to D, with no drawing: it sets chemistry, mechanical properties, diameter and wall tolerances by size band, tests and inspection (Tables I to V) and leaves size, outside diameter, wall thickness and length to the order (6.2(c)); Table VI lists commercially available pipe sizes for information only (1.3, 6.5), and the two stock numbers that cite it are bent pipe whose bends it does not give.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 3 - Validation, 29 December 2020. ASSIST also holds Revision C Amendment 2 (21 February 1966), Revision C Interim Amendment (24 December 1980) and Revision C Amendment 4 (12 December 2000). They were issued after this revision and are not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table VI, Caption, before Commercially: read as Commercially available pipe sizes, could be 1/ Commercially available pipe sizes.",
    "Printed value to confirm. Table VI prints 0.109 inch as the Schedule No. 5 wall of 1-1/2 inch pipe, between 0.065 inch for the 1-1/4 and 2 inch sizes. The weight printed in the same row, 1.4344 lb/ft, is what a 1.900 inch O.D. pipe with a 0.065 inch wall weighs at the 0.319 lb per cubic inch that the table's other Schedule No. 5, 10 and 80 weights fit, so the printed wall looks wrong.",
    "Printed value to confirm. Table VI prints 0.145 inch as the Schedule No. 10 wall of 1-1/2 inch pipe, between 0.109 inch for the 1-1/4 and 2 inch sizes. The weight printed in the same row, 2.3471 lb/ft, fits a 0.109 inch wall (2.3477 lb/ft) and not 0.145 inch (3.0603 lb/ft), so the printed wall looks wrong. In this row the Schedule No. 5, 10 and 40 walls each carry the next heavier schedule's wall.",
    "Printed value to confirm. Table VI prints 0.200 inch as the Schedule No. 40 wall of 1-1/2 inch pipe, the same as the Schedule No. 80 wall in that row and thicker than the 0.154 inch Schedule No. 40 wall of 2 inch pipe. The 0.145 inch printed in the row's Schedule No. 10 column falls between the 1-1/4 and 2 inch Schedule No. 40 walls (0.140 and 0.154 inch), so the 1-1/2 inch walls look shifted by one schedule.",
    "Printed value to confirm. Table VI prints the same weight per foot for Schedule No. 40 as for Schedule No. 80 in every row but 2-1/2 inch, and each of those weights fits the Schedule No. 80 wall: 1/2 inch pipe weighs 1.2251 lb/ft, as printed, at the 0.147 inch Schedule No. 80 wall and 0.9582 lb/ft at the 0.109 inch Schedule No. 40 wall, so the Schedule No. 40 weights look wrong. In the 2-1/2 inch row the Schedule No. 80 weight is printed 8.6269 lb/ft against 8.6265 lb/ft for Schedule No. 40, and 2.875 inch O.D. by 0.276 inch wall gives 8.6265 lb/ft."
   ]
  },
  {
   "id": "MIL-T-19646A(SH)",
   "slug": "mil-t-19646a-sh",
   "title": "Thermometer, gas actuated, remote reading",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-T-19646A(SH) Thermometer, gas actuated",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 50,
   "solids": 12,
   "dimensions": 109,
   "dimensions_met": 109,
   "kind": "Military specification",
   "dated": "8 February 1990",
   "status": "Active, 23 February 2021",
   "newest": "Revision A Notice 1 - Validation, 23 February 2021",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "6685-01-463-6742, thermometer, self-indicating, M19646-C224D330 (Seawolf)"
   ],
   "files": {
    "package": "MIL-T-19646A(SH) package.pdf",
    "scan": "MIL-T-19646A(SH) legacy scan.pdf",
    "clean": "MIL-T-19646A(SH) clean copy.pdf",
    "record": "MIL-T-19646A(SH) validation record.pdf",
    "sheet": "MIL-T-19646A(SH) 3D model.pdf",
    "parts": "MIL-T-19646A(SH) parts list.pdf",
    "inspection": "MIL-T-19646A(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 36",
   "pictures": {
    "iso": "Models/views/M19646-C1_-freecad.png",
    "pair": "Models/views/M19646-C1_-pair.png",
    "record": "Models/views/M19646-C1_-record.png",
    "front": "Models/views/M19646-C1_-front.png",
    "top": "Models/views/M19646-C1_-top.png",
    "right": "Models/views/M19646-C1_-right.png",
    "cut": "Models/views/M19646-C1_-cut.png"
   },
   "shown_part": "M19646-C1*",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the eleven sensor configurations, A1, B1 to B6 and C1 to C4, each a bulb with its sensing cavity, extension tube and fitting (the figure 3 flange for class B, the sliding connector for classes A and C), and the figure 4 standard cylinder used in the response time test.",
   "not_modeled": [
    "The part number adds range, dial size and capillary tubing length (any multiple of 5 ft) to the sensor configuration, so the part numbers have no fixed count; one solid is built per sensor configuration, which carries every dimension the sheet gives, and A1 has the C2 dimensions.",
    "The indicator: case and flush mounting ring (NAVSEA S8700-1385799 and S8700-841569), window, elastic element, movement, pointers and dial, for which table III gives only minimum numeral heights and dial and scale diameters.",
    "The capillary tubing and its spiral armor, and the class A bracket (NAVSEA 810-1385917, 4 in. inner length).",
    "The hexes, jam nut, ferrule and compression profile surface of the sliding connector assembly, thread form and class, and the end fittings where the armored capillary leaves the extension tube.",
    "The immersion depth line (a marking), the P-16 seal weld of the flange, materials and finishes.",
    "The standard cylinder's thermocouple wire, measuring junction, tin, silver braze fillet and drill point."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "50 pages, all scanned. SHA-256 a3797cbc8862.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "12,856 of 12,986 items agreed. 32 differences went to a third reader. A second pass settled 4 from a second printing in the document, 1 from a closer look at the page. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "79 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "38 pages of searchable text, 26 tables (589 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "12 solids in STEP AP242. 109 of 109 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 23 February 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 33, row 1, column 4: read as ----, could be ---.",
    "Model. Figure 3 letters both the hub height (side view) and the bolt hole diameter (plan view, H DIA) H, and its table gives one H, 11/16 for B1, B3, B5 and 15/16 for B2, B4, B6 (+.12 -.00). The solids use it for both, which makes the hub taller than the flange is thick on B1, B3 and B5, while R = G - H - 1/8 on both rows puts the hub edge 1/16 in. inside the bolt holes and points to H being the hole; an engineer must confirm which feature H sizes and give the other.",
    "Model. Figure 3 gives the hub diameter R (2-11/16 and 2-15/16) a tolerance of \u00b1 .00, which no part can be made to; the solids are built at R, and an engineer must give the tolerance."
   ]
  },
  {
   "id": "MIL-T-24388C(SH)",
   "slug": "mil-t-24388c-sh",
   "title": "Thermocouple and resistance temperature detector assemblies, general specification for (naval shipboard)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-T-24388C(SH) Thermocouple and resistance temperature detector",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 48,
   "solids": 19,
   "dimensions": 270,
   "dimensions_met": 270,
   "kind": "Military specification",
   "dated": "30 March 1990",
   "status": "Active, 30 March 1990",
   "newest": "Revision C, 30 March 1990",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "6685-01-431-1454, thermocouple assembly, MIL-T-24388 (Seawolf)"
   ],
   "files": {
    "package": "MIL-T-24388C(SH) package.pdf",
    "scan": "MIL-T-24388C(SH) legacy scan.pdf",
    "clean": "MIL-T-24388C(SH) clean copy.pdf",
    "record": "MIL-T-24388C(SH) validation record.pdf",
    "sheet": "MIL-T-24388C(SH) 3D model.pdf",
    "parts": "MIL-T-24388C(SH) parts list.pdf",
    "inspection": "MIL-T-24388C(SH) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 40",
   "pictures": {
    "iso": "Models/views/MIL-T-24388_NRT-BB-B1-freecad.png",
    "pair": "Models/views/MIL-T-24388_NRT-BB-B1-pair.png",
    "record": "Models/views/MIL-T-24388_NRT-BB-B1-record.png",
    "front": "Models/views/MIL-T-24388_NRT-BB-B1-front.png",
    "top": "Models/views/MIL-T-24388_NRT-BB-B1-top.png",
    "right": "Models/views/MIL-T-24388_NRT-BB-B1-right.png",
    "cut": "Models/views/MIL-T-24388_NRT-BB-B1-cut.png"
   },
   "shown_part": "MIL-T-24388 NRT-BB-B1",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids for all 18 classifications the sheet dimensions: the nine thermowell designations of Table II, each the Figure 1 sensor seated in the Figure 2 connection head extension as Figure 4 installs it and fused into one body; the six one-piece bare bulb sensors of Table III (Figure 5) and their copper gasket; and the three embedded sensors of Table IV (Figure 6), which share one shape.",
   "not_modeled": [
    "The connecting wires: the two or three 22 AWG wires of Figure 1 (4.0 MIN. out of the header, bared 1.0 MIN.), whose diameter the sheet leaves to MIL-W-16878/25 and MIL-W-5846, and the three leads of Figure 6 (0.125 \u00b1 .016, 36.0 MIN. long, bared 1.0 MIN.).",
    "The connection head, cap, chain and terminal board of Figure 3 (head design may vary within 2 3/4 MAX; terminal board hole 0.515 \u00b1 0.005 across the flats), and the MIL-T-24270 thermowell, which is not supplied.",
    "The spring's .88 \u00b1 .01 free length and its 5 lb force at 3/16 compression: the solids carry the spring compressed to its installed length L \u2212 Y.",
    "Thread forms and classes, the length of the 1/2\"-14 NPSM thread (note 1: to suit the head), the .45 length of the 3/4-20UNEF-3A thread, and the thread chamfers and fillets the figures draw without sizes.",
    "The bare bulb connector receptacle's socket, pins, glass seal and embossed key (MS 3102R-12S-3P or MS 3102R-14S-7S equivalent), its end cap, and the sensing element .18 from the tip.",
    "The pressure and scoring test fixtures of Figures 7 and 8, which are test equipment the figures dimension only at the bore.",
    "Materials, welds, marking, internal insulation and seals, element positions, and the broken edges of Figure 6 note 2."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "48 pages, all scanned. SHA-256 08cd57609e10.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "11,532 of 12,094 items agreed. All 65 differences were settled against the page image. A second pass settled 1 from a second printing in the document, 1 from the sheet's layout (a point the scan did not print). 2 values that the scan prints in a doubtful form are listed for the engineer.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "202 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "36 pages of searchable text, 26 tables (879 cells), 8 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "19 solids in STEP AP242. 270 of 270 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C, 30 March 1990.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table II, Z column header: the scan prints Z \u00b1 0 16 with a blank space where the decimal point belongs, while the L, A and Y headers beside it print 0.04, 0.03 and 0.01 with their points. The tolerance is printed nowhere else in the document, and it is carried as \u00b1 0.16.",
    "Printed value to confirm. Table II, Y for NRT designation 6 at 2.71 insertion: the scan prints 6 00 with a blank space where the decimal point belongs, while every other Y value prints its point. On the other eight rows Y is L \u2212 0.71 and Z \u2212 1.50, which gives 6.00 from this row's L 6.71 and Z 7.50.",
    "Model. Two Table II values that the scan prints without their decimal point carry into the thermowell solids: every Z check uses the \u00b1 0.16 band, and NRT-TW-6 at 2.71 insertion is built with Y at 6.00, which keeps L \u2212 Y at 0.71 and Z \u2212 Y at 1.50 as on every other row.",
    "Model. Table II gives designation 6 to two NRT thermowell assemblies of different size (L 6.71 at 2.71 insertion, L 6.46 at 4.71), so NRT TW 6 does not name one part; the solids add the insertion length to the name.",
    "Model. Figure 2 calls the extension's lower end thread 3/4-28 UNS-2B, an internal thread class, but Figures 2 and 4 draw it external, screwed into the thermowell; the solids model it external.",
    "Model. Figure 5 note 2 makes the PRT receptacle equivalent to MS 3102R-14S-7S, a shell with a 7/8-20 UNEF coupling thread, but the figure prints 3/4-20UNEF-3A for every type; PRT-BB-B3 and B4 use the figure's thread."
   ]
  },
  {
   "id": "MIL-T-55164C",
   "slug": "mil-t-55164c",
   "title": "Terminal boards, molded, barrier screw and stud types, and associated accessories, general specification for",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-T-55164C Terminal boards, molded",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 28,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "28 January 1987",
   "status": "Canceled, 26 September 1997",
   "newest": "Revision C Notice 1 - Cancellation, 26 September 1997",
   "superseding": "A-A-59125",
   "preparing_activity": "US Army Combat Capabilities Development Command, C5ISR Center",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5940-01-440-0735, terminal board, MIL-T-55164 (Seawolf)"
   ],
   "files": {
    "package": "MIL-T-55164C package.pdf",
    "scan": "MIL-T-55164C legacy scan.pdf",
    "clean": "MIL-T-55164C clean copy.pdf",
    "record": "MIL-T-55164C validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "28 pages, all scanned. SHA-256 c6acff98d8d6.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "6,798 of 6,830 items agreed. All 21 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "8 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "19 pages of searchable text, 12 tables (508 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-T-55164C is the general specification for one-piece molded barrier terminal boards of the screw and stud types, their bus (jumper) connectors and their marker strips, and has no dimensioned part drawing: it sets the 25 board classes from 3TB to 44TB by number of rows, type of connection, type of terminal, specification sheet, nominal spacing between barriers (.187 to .421 inch, none for 13TB, which has no molded barrier), rated voltage and rated current (Table I), the plastics, brass, bronze, steel and copper alloy materials and their plating, studs threaded to within 0.047 inch of the shoulder (3.4.2), warpage of no more than 0.006 inch per inch of board length (3.4.7), the screw sizes 2-56 to 8-32 and stud sizes 4-40 to 8-32 with their test torques (Tables VII and VIII), test currents, wire sizes and MS17143 lug dash numbers (Table IX), inspection and packaging, and it leaves the design, construction and physical dimensions of every board, connector and marker strip, including the overall length, width and height, mounting hole diameter and mounting hole spacing that group A inspection measures (4.6.1), to the specification sheets numbered 1 to 6 and 9 to 27 in Table I (3.1, 3.4), which it does not reproduce; Figure 1 is a wiring sketch for the current-carrying capacity test with no dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 1 - Cancellation, 26 September 1997.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-T-55164/14B",
   "slug": "mil-t-55164-14b",
   "title": "Terminal boards, molded, barrier stud type, class 8TB",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-T-55164_14B Terminal boards, molded",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 3,
   "solids": 10,
   "dimensions": 209,
   "dimensions_met": 209,
   "kind": "Military specification sheet",
   "dated": "21 November 1988",
   "status": "Canceled, 26 September 1997",
   "newest": "Revision B Notice 2 - Cancellation, 26 September 1997",
   "superseding": "A-A-59125/14",
   "preparing_activity": "US Army Combat Capabilities Development Command, C5ISR Center",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "2920-01-436-0337, terminal block, electrical, MIL-T-55164/14 (Seawolf)"
   ],
   "files": {
    "package": "MIL-T-55164_14B package.pdf",
    "scan": "MIL-T-55164_14B legacy scan.pdf",
    "clean": "MIL-T-55164_14B clean copy.pdf",
    "record": "MIL-T-55164_14B validation record.pdf",
    "sheet": "MIL-T-55164_14B 3D model.pdf",
    "parts": "MIL-T-55164_14B parts list.pdf",
    "inspection": "MIL-T-55164_14B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/8TB10F-freecad.png",
    "pair": "Models/views/8TB10F-pair.png",
    "record": "Models/views/8TB10F-record.png",
    "front": "Models/views/8TB10F-front.png",
    "top": "Models/views/8TB10F-top.png",
    "right": "Models/views/8TB10F-right.png",
    "cut": "Models/views/8TB10F-cut.png"
   },
   "shown_part": "8TB10F",
   "application": "FreeCAD 1.1.4",
   "modeled": "Molded barrier stud terminal boards 8TB2, 8TB6, 8TB8 and 8TB10 in temperature classes F and H, each with its studs, stud connectors and terminal nuts in place, plus the terminal nut (detail A) and stud connector (detail B) as separate solids.",
   "not_modeled": [
    "Molded terminal numbers and the recessed .125 marking letters.",
    "Thread form of the No. 5-40 studs and nut bores, and the clearance between studs and the nut and connector holes on the board.",
    "The internal bottom counterbore and bore of each nut on the board solid (they are modeled on the detail A solid).",
    "Materials (table II), electrical ratings and the recommended terminal lugs.",
    "Classes F and H differ only in material; their solids are identical."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 c5ab7acc2b76.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "262 of 267 items agreed. 5 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 3 tables (30 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "10 solids in STEP AP242. 209 of 209 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision B Notice 2 - Cancellation, 26 September 1997.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 1, Tolerances under the two .015 callouts: read as \u00b1.005, could be \u00b1.003.",
    "Model. Figure 1 prints a .078 barrier and a .285 +-.010 space between barriers at a .375 terminal pitch, and .078 plus .285 is .363, not .375, so the three cannot all hold at their nominal values. The model builds the barrier .090 thick (the pitch less the space, inside the general +-.016 on .078); the engineer must decide whether the barrier thickness or the space between barriers governs."
   ]
  },
  {
   "id": "MIL-T-55164/7G",
   "slug": "mil-t-55164-7g",
   "title": "Terminal lugs, solder type styles tbld and tbls",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-T-55164_7G Terminal lugs, solder type styles tbld and tbls",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 10,
   "dimensions": 148,
   "dimensions_met": 148,
   "kind": "Military specification sheet",
   "dated": "9 March 1993",
   "status": "Canceled, 26 September 1997",
   "newest": "Revision G Notice 1 - Cancellation, 26 September 1997",
   "superseding": "A-A-59125/7",
   "preparing_activity": "US Army Combat Capabilities Development Command, C5ISR Center",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5940-01-369-9504, terminal, lug, MIL-T-55164/7 (Seawolf)"
   ],
   "files": {
    "package": "MIL-T-55164_7G package.pdf",
    "scan": "MIL-T-55164_7G legacy scan.pdf",
    "clean": "MIL-T-55164_7G clean copy.pdf",
    "record": "MIL-T-55164_7G validation record.pdf",
    "sheet": "MIL-T-55164_7G 3D model.pdf",
    "parts": "MIL-T-55164_7G parts list.pdf",
    "inspection": "MIL-T-55164_7G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/TBLD39-freecad.png",
    "pair": "Models/views/TBLD39-pair.png",
    "record": "Models/views/TBLD39-record.png",
    "front": "Models/views/TBLD39-front.png",
    "top": "Models/views/TBLD39-top.png",
    "right": "Models/views/TBLD39-right.png",
    "cut": "Models/views/TBLD39-cut.png"
   },
   "shown_part": "TBLD39",
   "application": "FreeCAD 1.1.4",
   "modeled": "Flat solder lug strips, styles TBLD (slotted both ends) and TBLS (slotted one end), for terminal board types 37, 38, 39, 43 and 44, with end slots, narrowed tabs (types 37 to 39) and J and K holes.",
   "not_modeled": [
    "Nickel or tin plating and the brass material grade.",
    "Current ratings of table II.",
    "Corner radii on the lug outline and tine ends, which the drawing shows but does not dimension."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, all scanned. SHA-256 c0160aaf4256.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "300 of 304 items agreed. All 4 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (76 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "10 solids in STEP AP242. 148 of 148 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision G Notice 1 - Cancellation, 26 September 1997.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The table on page 2 prints four cells as two values with a slash: B .280/.300 and K .141/.160 for type 37, and E depth .149/.235 and F .248/.328 for type 38. The sheet does not say whether each pair is a range or two accepted sizes, and note 2 still gives these dimensions a plus or minus tolerance, so the engineer must decide which size or range to build; the models use the middle of each pair.",
    "Model. The type 44 edge view on page 2 prints the thickness as .020+.002 with no minus tolerance, while the type 43 edge view on page 1 prints .020\u00b1.002. The engineer must decide whether type 44 is .020 to .022 thick, as the models take it, or .018 to .022 like type 43."
   ]
  },
  {
   "id": "MIL-V-24109A(SHIPS)",
   "slug": "mil-v-24109a-ships",
   "title": "Valves, globe, angle, quick change cartridge trim, high pressure (H.P.) hydraulic and pneumatic (sizes 1/8 - 1-1/4 inches)",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-V-24109A(SHIPS) Valves, globe",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 24,
   "solids": 53,
   "dimensions": 701,
   "dimensions_met": 701,
   "kind": "Military specification",
   "dated": "31 August 1971",
   "status": "Active, 31 August 1971",
   "newest": "Revision A, 31 August 1971",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-V-24109A(SHIPS) package.pdf",
    "scan": "MIL-V-24109A(SHIPS) legacy scan.pdf",
    "clean": "MIL-V-24109A(SHIPS) clean copy.pdf",
    "record": "MIL-V-24109A(SHIPS) validation record.pdf",
    "sheet": "MIL-V-24109A(SHIPS) 3D model.pdf",
    "parts": "MIL-V-24109A(SHIPS) parts list.pdf",
    "inspection": "MIL-V-24109A(SHIPS) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 10",
   "pictures": {
    "iso": "Models/views/MIL-V-24109_globe_body_1_2-freecad.png",
    "pair": "Models/views/MIL-V-24109_globe_body_1_2-pair.png",
    "record": "Models/views/MIL-V-24109_globe_body_1_2-record.png",
    "front": "Models/views/MIL-V-24109_globe_body_1_2-front.png",
    "top": "Models/views/MIL-V-24109_globe_body_1_2-top.png",
    "right": "Models/views/MIL-V-24109_globe_body_1_2-right.png",
    "cut": "Models/views/MIL-V-24109_globe_body_1_2-cut.png"
   },
   "shown_part": "MIL-V-24109 globe body 1/2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the standard parts that the appendix of MIL-V-24109A draws, for each of the seven sizes 1/8 to 1-1/4 IPS: the globe and angle bodies without vents (the cavity of figures 1 and 3 and the end connections and flow passages of figures 4 and 5, inside an outline the document leaves open), the valve seat, the lower disc and the seat insert before swaging (figure 6), the lower bonnet cartridge (figure 7) and the handwheel (figure 10), with the two vent valve stems and pins of figures 8 and 9.",
   "not_modeled": [
    "The seat \"O\" ring D, the bonnet \"O\" ring F and the back-up ring G, which Table V names only by MS28775 dash number.",
    "The disc and insert after swaging (B5, the two 1/32 dimensions and 7\u00b0 \u00b12\u00b0) and after the insert is machined to B6 (note C.2), and the two grooves at the root of the nose, which only the swaged view locates (B1 and B2).",
    "The upper ends of the disc and of the bonnet cartridge, which figures 6 and 7 break off (stem joint, guide, packing and the cartridge above the E1 pilot), and the cartridge bore above the E3 counterbore, which figure 7 does not dimension.",
    "The vent bosses of figure 2 (A11 to A16) and the vent tapped holes A13; the bodies are the without-vents option of 6.2 (g).",
    "The body outline beyond the cavity and the end connections: the bonnet neck and its .03 R, the reliefs behind the union threads, the bottom boss and the cast shapes of figure 4.",
    "The corner radius A4 of the chamber shoulder on sizes 3/4 to 1-1/4, the 1/16 x 45\u00b0 chamfer at the start of the cavity thread and the .005 R in the cartridge counterbore: the solids have sharp corners there.",
    "The rounded ends of the figure 8 pin, drawn without a radius, and the straight knurl on both pins.",
    "Thread forms, classes, pitch diameters and hands, the 32, 63 and 125 finish marks, the .005 R edge breaks of note A.2, the concentricity, squareness and parallelism of notes B.2 to B.6, D.1, D.2, E.1 and G.1, markings and materials.",
    "The assembled valve, disc lift (table II) and torques (table III): each part is a separate solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "24 pages, all scanned. SHA-256 1d386de1a547.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,581 of 3,697 items agreed. 107 differences went to a third reader. A second pass settled 1 from the sheet's layout (a point the scan did not print). 23 readings remain open.",
     "result": "23 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "417 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "20 pages of searchable text, 12 tables (610 cells), 10 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "53 solids in STEP AP242. 701 of 701 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A, 31 August 1971.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 3, Left margin beside paragraph number 3.11.2: read as , could be *.",
    "Open reading. Page 3, Left margin beside paragraph number 3.12: read as , could be *.",
    "Open reading. Page 3, Left margin beside paragraph number 3.12.1: read as , could be *.",
    "Open reading. Page 4, Left margin beside paragraph number 3.12.2: read as , could be *.",
    "Open reading. Page 4, Left margin beside paragraph number 3.12.3: read as , could be *.",
    "Open reading. Page 6, Left margin beside paragraph number 4.5: read as , could be *.",
    "Open reading. Page 6, Left margin beside paragraph number 5.1.1.2: read as , could be *.",
    "Open reading. Page 6, Left margin beside paragraph number 5.1.2: read as , could be *.",
    "Open reading. Page 11, Whole line: read as SH 7957, could be SH 7457.",
    "Open reading. Page 11, Whole line: read as SH 7958, could be SH 7938.",
    "Open reading. Figure 3, Stacked characters right of the A18 arrow: read as , could be +.005 / -.000.",
    "Open reading. Figure 3, text at the top left corner of the groove: read as , could be 32.",
    "Open reading. Figure 9, Thread callout, class digit: read as 1/2-13 UNC-3A, could be 1/2-13 UNC-2A.",
    "Open reading. Figure 9, Hole diameter tolerance: read as 1/4 +.001 -.000.",
    "Open reading. Figure 9, Hole location below the hole view: read as 5/16.",
    "Open reading. Figure 9, note below the pin: read as 1/4 R, could be 1/4 F.",
    "Open reading. Figure 9, Third length in the lower view: read as 1/8, could be 1/6.",
    "Open reading. Figure 9, Finish mark at the top of the tip in the lower view: read as illegible, not transcribed.",
    "Open reading. Page 17, Handwritten sheet mark: read as SH 7964, could be SH 7984.",
    "Open reading. Table V, row 3/8, column A6: read as .438, could be .439.",
    "Open reading. Table V, row 1-1/4, column A5: read as 2-11/15 \u00b11/16, could be 2-11/16 \u00b11/16.",
    "Open reading. Table V, row 1/2, column E5: read as 1-5/8-14NS-3A P.D.=1.579-1.595 L.H. thread, could be 1-5/8-14NS-3A P.D.=1.579-1.575 L.H. thread.",
    "Open reading. Table V, row 3/4, column E5: read as 1.3/4-12UN-3A L.H. thread, could be 1-3/4-12UN-3A L.H. thread.",
    "Model. Note C.2 has the insert machined to dimension B6 after swaging, but neither figure 6 nor Table V gives B6, so the finished lower disc cannot be modeled; the solids are the disc and insert before swaging.",
    "Model. Table V prints A5 for the 1-1/4 size as 2-11/15 \u00b11/16, probably a typing error for 2-11/16; the 1-1/4 bodies use the printed 2.733, which also lies within 2-11/16 \u00b11/16.",
    "Model. On the 3/4 and 1 sizes the 1/16 x 45\u00b0 chamfer at the end of the cavity thread takes all or half of the radial step from A3 to A5 (1/16 and 1/8), leaving no flat shoulder on the 3/4 and 1/16 on the 1 for the A4 corner radius of .06 and .13; an engineer must say how A4 meets the chamfer, as note 9 does for sizes 1/8 to 1/2.",
    "Model. Figure 2 places the vent bores only by height below the top (A11 and A12, as ranges) and gives their depths A14 and A15 from a boss face whose distance from the valve axis it does not give, so the vents cannot be placed on the bodies.",
    "Model. The solids use readings still open in the transcription: A6 = .438 on the 3/8 bodies, E5 printed 1.3/4-12UN-3A read as 1-3/4 on the 3/4 cartridge, and on figure 9 the 1/4 +.001 -.000 pin hole 5/16 from the end, the 1/8 cone and the 1/4 R pin ends (1/8 is what a 45\u00b0 cone from 1/4 to 1/2 needs, and 5/16 centers the hole on the 5/8 hex)."
   ]
  },
  {
   "id": "MIL-V-8813(ASG)",
   "slug": "mil-v-8813-asg",
   "title": "Valves: aircraft, hydraulic pressure relief, type II systems",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-V-8813(ASG) Valves-aircraft, hydraulic pressure relief",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "20 NOVEMBER 1957",
   "status": "Inactive, 7 November 2023",
   "newest": "Notice 2 - Validation, 7 November 2023",
   "superseding": "",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4820-01-417-9514, valve, safety relief, MIL-V-8813 (Seawolf)"
   ],
   "files": {
    "package": "MIL-V-8813(ASG) package.pdf",
    "scan": "MIL-V-8813(ASG) legacy scan.pdf",
    "clean": "MIL-V-8813(ASG) clean copy.pdf",
    "record": "MIL-V-8813(ASG) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, all scanned. SHA-256 932dce4a77d1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,108 of 3,258 items agreed. All 46 differences were settled against the page image. 1 mark outside the technical content is kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "18 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 5 tables (210 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-V-8813(ASG) is the military specification for hydraulic pressure relief valves in type II aircraft hydraulic systems and has no part drawing: it gives the minimum and maximum rated flow pressure settings and the maximum differential between full flow and reseat pressure for classes A to D (Table I), the order of the qualification tests (Tables II and III), reseat and decreasing pressure leakage limits for tube sizes -4 to -12 (Tables IV and V), and test methods with three test-setup schematics that give no part dimensions (Figures 1 to 3), and it refers the valve's sizes and rated flows (1.2) and its configuration, dimensions and design details (3.3) to Standard MS28893, which it does not reproduce.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Notice 2 - Validation, 7 November 2023. ASSIST also holds Amendment 2 (30 July 1981). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-W-16878/4C(NAVY)",
   "slug": "mil-w-16878-4c-navy",
   "title": "Wire, electrical, polytetrafluoroethylene (PTFE) insulated, 200\u00b0C, 600 volts, extruded insulation",
   "class": "Seawolf",
   "folder": "Seawolf/MIL-W-16878_4C(NAVY) Wire, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 36,
   "dimensions": 108,
   "dimensions_met": 108,
   "kind": "Military specification sheet",
   "dated": "11 September 1992",
   "status": "Canceled, 24 May 2002",
   "newest": "Revision C Notice 2 - Cancellation, 24 May 2002",
   "superseding": "NEMA-HP3",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "6145-00-686-5164, wire, electrical, M16878/4BDB3 (Seawolf)"
   ],
   "files": {
    "package": "MIL-W-16878_4C(NAVY) package.pdf",
    "scan": "MIL-W-16878_4C(NAVY) legacy scan.pdf",
    "clean": "MIL-W-16878_4C(NAVY) clean copy.pdf",
    "record": "MIL-W-16878_4C(NAVY) validation record.pdf",
    "sheet": "MIL-W-16878_4C(NAVY) 3D model.pdf",
    "parts": "MIL-W-16878_4C(NAVY) parts list.pdf",
    "inspection": "MIL-W-16878_4C(NAVY) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M16878_4-BDB_-freecad.png",
    "pair": "Models/views/M16878_4-BDB_-pair.png",
    "record": "Models/views/M16878_4-BDB_-record.png",
    "front": "Models/views/M16878_4-BDB_-front.png",
    "top": "Models/views/M16878_4-BDB_-top.png",
    "right": "Models/views/M16878_4-BDB_-right.png",
    "cut": "Models/views/M16878_4-BDB_-cut.png"
   },
   "shown_part": "M16878/4-BDB*",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid of revolution for each of the 36 Table I PINs: a 1.000 inch representative piece of finished wire with the conductor bared for 0.250 inch at one end, as Figure 1 draws it, the conductor at its nominal diameter and the extruded PTFE insulation at the middle of its finished wire diameter limits.",
   "not_modeled": [
    "The strands of the stranded conductors (7 X 40 to 37 x 28) and the silver coating; each conductor is one round solid at its Table I nominal diameter.",
    "Materials (copper, high-strength copper alloy or copper-clad steel conductors; PTFE insulation), the color code (*), and the identification marking required for sizes 22 AWG and larger.",
    "Requirements that are not shape: spark 3.4 kV, impulse dielectric 6.5 kV, dielectric withstanding voltage 2.0 kV, insulation resistance IR = K log10 D/d with K = 50,000, cold bend on the Table II mandrels (sizes 32 through 16, 1 inch max; sizes 14 through 10, 2 inch max), heat resistance, wrap back, flammability, shrinkage, toxicity, insulation tensile strength and elongation, the dc resistance of table I of MIL-W-16878 and the wire length of appendix B.",
    "The 15 former part numbers of Table III (MIL-W-16878/4-BCB to MIL-W-16878/4-BMG), replaced by MIL-W-22759 wire; Table I gives them no dimensions."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, all scanned. SHA-256 73a0c78f0687.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "637 of 638 items agreed. All 1 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "210 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (322 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "36 solids in STEP AP242. 108 of 108 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 2 - Cancellation, 24 May 2002. ASSIST also holds Revision C Amendment 1 (8 June 1994). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table I prints M16878/4-BAA* for two different wires, size 32 (1 X 32 Copper, conductor 0.0080, finished 0.025 to 0.033) and size 30 (1 X 30 Copper, conductor .0100, finished .026 to .034), while the other size 30 PINs (DBA*, CBA*, BBB*, DBB*) carry B as the size letter, so the engineer must confirm whether that size 30 row is M16878/4-BBA*."
   ]
  },
  {
   "id": "MS15588(SHIPS)",
   "slug": "ms15588-ships",
   "title": "Lamps, fluorescent, T-5, miniature bipin",
   "class": "Seawolf",
   "folder": "Seawolf/MS15588(SHIPS) Lamps, fluorescent",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 1,
   "solids": 2,
   "dimensions": 22,
   "dimensions_met": 22,
   "kind": "Military standard",
   "dated": "8 August 1975",
   "status": "Canceled, 20 April 1989",
   "newest": "Revision H Notice 1 - Cancellation, 20 April 1989",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "6240-00-299-5546, lamp, fluorescent, MS15588-3 (Seawolf)"
   ],
   "files": {
    "package": "MS15588(SHIPS) package.pdf",
    "scan": "MS15588(SHIPS) legacy scan.pdf",
    "clean": "MS15588(SHIPS) clean copy.pdf",
    "record": "MS15588(SHIPS) validation record.pdf",
    "sheet": "MS15588(SHIPS) 3D model.pdf",
    "parts": "MS15588(SHIPS) parts list.pdf",
    "inspection": "MS15588(SHIPS) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS15588-4-freecad.png",
    "pair": "Models/views/MS15588-4-pair.png",
    "record": "Models/views/MS15588-4-record.png",
    "front": "Models/views/MS15588-4-front.png",
    "top": "Models/views/MS15588-4-top.png",
    "right": "Models/views/MS15588-4-right.png",
    "cut": "Models/views/MS15588-4-cut.png"
   },
   "shown_part": "MS15588-4",
   "application": "FreeCAD 1.1.4",
   "modeled": "Outside-envelope solids of the two T-5 miniature bipin fluorescent lamps, MS15588-3 and MS15588-4: a solid bulb cylinder between two base shells of diameter D, A apart, with two round pins E apart at each end.",
   "not_modeled": [
    "The inside of the lamp (glass wall, electrodes, gas fill and phosphor), which the sheet does not dimension; the solids are outside envelopes.",
    "Watts, rated life, lumen output, the cool white color and the requirements of procurement specification W-L-116, which are not geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 584c0c98ac5a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "113 of 169 items agreed. All 13 differences were settled against the page image. 2 marks outside the technical content are kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 1 table (24 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 22 of 22 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision H Notice 1 - Cancellation, 20 April 1989.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no pin diameter and note 3 only requires the pins to enter two 0.110 in holes 0.187 in apart, so the solids use 0.090 in pins and an engineer must set the pin diameter.",
    "Model. The sheet sets the pin length only through A, B and C, which with the same pins at both ends allow 0.19 to 0.38 in; the solids use 0.235 in, and an engineer must confirm the pin length."
   ]
  },
  {
   "id": "MS17986G",
   "slug": "ms17986g",
   "title": "Pin, quick release, self-retaining, positive locking, single acting, \"L\" handle",
   "class": "Seawolf",
   "folder": "Seawolf/MS17986G Pin, quick release",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 11,
   "dimensions": 165,
   "dimensions_met": 165,
   "kind": "Military specification sheet",
   "dated": "1 JUN 94",
   "status": "Canceled, 30 November 1998",
   "newest": "Revision G Notice 1 - Cancellation, 30 November 1998",
   "superseding": "NASM17986",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5315-01-503-0811, pin, quick release, MS17986C844 (Seawolf)"
   ],
   "files": {
    "package": "MS17986G package.pdf",
    "scan": "MS17986G legacy scan.pdf",
    "clean": "MS17986G clean copy.pdf",
    "record": "MS17986G validation record.pdf",
    "sheet": "MS17986G 3D model.pdf",
    "parts": "MS17986G parts list.pdf",
    "inspection": "MS17986G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS17986C810-freecad.png",
    "pair": "Models/views/MS17986C810-pair.png",
    "record": "Models/views/MS17986C810-record.png",
    "front": "Models/views/MS17986C810-front.png",
    "top": "Models/views/MS17986C810-top.png",
    "right": "Models/views/MS17986C810-right.png",
    "cut": "Models/views/MS17986C810-cut.png"
   },
   "shown_part": "MS17986C810",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MS17986 single acting L handle quick release pin, one per nominal diameter from 3/16 to 1 at the 1.000 grip (dash numbers C310 to C1610), with L handle and attaching ring hole, release button, hub and collar, shank, two locking elements and end chamfer.",
   "not_modeled": [
    "Table II defines 1,029 dash numbers (grips .300 to 9.900); only the 1.000 grip of each of the 11 diameters is modeled, and the other grips differ only in shank length.",
    "Internal spindle, spring and locking-element pockets are not modeled; the pin is an outside envelope.",
    "The attaching ring or S link (.050 min wire) is a separate part and is not modeled; only its .100 min hole in the handle is.",
    "Double shear, tensile strength, recommended hole diameter, materials, heat treatment and surface treatment are recorded but not modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 d8ce9059849d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,097 of 1,399 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "441 checks on size series and limits. None failed. 1,321 values are also printed on 4 other sheets of the series: 1,317 match, 4 differ as printed. A later review settled 1 printed value from the other sheets of the series.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 3 tables (1,435 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "11 solids in STEP AP242. 165 of 165 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision G Notice 1 - Cancellation, 30 November 1998.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Differs within the series. Dash number, 3/16 diameter, C414: .. here; MS17984 prints C314, MS17985 prints C314, MS17987 prints C314. Grip 1.400. MS17984, MS17985 and MS17987 print C314 on page 3; MS17986 prints only two dots in the 3/16 cell, and MS17990 prints the same two dots (transcribed there as an empty cell). Both pages are clear (crops 86-page 3-r7-12.png, 90-page 3-r7-12.png).",
    "Differs within the series. Dash number, 3/4 diameter, C961: C1261 here; MS17984 prints C1260, MS17985 prints C1260, MS17987 prints C1260. Grip 6.100. MS17984, MS17985 and MS17987 print C1260 clearly on page 6, repeating their 6.000 row; MS17986 and MS17990 print C1261 clearly (crops page 6-84-r6100.png to page 6-90-r6100.png).",
    "Differs within the series. Grip length, rows of the 3/16 to 1/2 table (sheets printing the decimal point), C311: . here; MS17985 prints 1.100. MS17985 prints 1.100 on page 3; MS17986 prints only a dot in the grip length cell of the C311 row, between 1.000 and 1.200, and MS17990 prints the same dot (transcribed there as an empty cell). Both pages are clear (crops 86-page 3-r7-12.png, 90-page 3-r7-12.png).",
    "Model. The figure dimensions the shank end chamfer only by an angle, printed as 30\u00b0 over 15\u00b0, and gives no chamfer length or end diameter. The solids use a 30\u00b0 chamfer cut to a depth of one eighth of the shank diameter; an engineer must confirm what the two angles limit and set the size of the chamfer.",
    "Model. Table II on page 3 prints dash number C521 for the 5/16 pin at both grip 2.000 and grip 2.100, so one number names two pins; the numbering rule on page 2 (diameter in sixteenths, grip in tenths) gives C520 for grip 2.000, and revision F of this sheet printed C520 there. An engineer must confirm the dash number of the 5/16 pin at grip 2.000.",
    "Model. Table II on page 3 prints only a period for the grip of the row holding C311 to C811, and only two periods for the 3/16 pin at grip 1.400, so that row has no grip and that pin has no dash number. The rows around them and the numbering rule on page 2 give grip 1.100 and C314, which revision F of this sheet printed; an engineer must confirm both."
   ]
  },
  {
   "id": "MS19060",
   "slug": "ms19060",
   "title": "Balls, bearing, corrosion resistant steel",
   "class": "Seawolf",
   "folder": "Seawolf/MS19060 Balls, bearing",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 176,
   "dimensions": 880,
   "dimensions_met": 880,
   "kind": "Military standard",
   "dated": "31 JUL 87",
   "status": "Canceled, 25 June 2026",
   "newest": "Revision D Notice 5 - Cancellation, 25 June 2026",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4820-01-421-4958, retainer, disk, valve, MS19060-518 (Seawolf)"
   ],
   "files": {
    "package": "MS19060 package.pdf",
    "scan": "MS19060 legacy scan.pdf",
    "clean": "MS19060 clean copy.pdf",
    "record": "MS19060 validation record.pdf",
    "sheet": "MS19060 3D model.pdf",
    "parts": "MS19060 parts list.pdf",
    "inspection": "MS19060 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS19060-323-freecad.png",
    "pair": "Models/views/MS19060-323-pair.png",
    "record": "Models/views/MS19060-323-record.png",
    "front": "Models/views/MS19060-323-front.png",
    "top": "Models/views/MS19060-323-top.png",
    "right": "Models/views/MS19060-323-right.png",
    "cut": "Models/views/MS19060-323-cut.png"
   },
   "shown_part": "MS19060-323",
   "application": "FreeCAD 1.1.4",
   "modeled": "Bearing balls as true spheres at the Table I basic diameter, one solid for each of the 176 dash numbers across grades 3, 5, 10, 16, 48, 100 and 200.",
   "not_modeled": [
    "Surface roughness by grade (Table II).",
    "Lot tolerances: lot diameter variation, ball gage deviation and container marking increment (Table III).",
    "Material (UNS S44003 or S44004), hardness 58-65 HRC and density .277 lb/in3."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, all scanned. SHA-256 7664c8f0678b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,032 of 1,612 items agreed. All 36 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "730 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 5 tables (1,250 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "176 solids in STEP AP242. 880 of 880 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision D Notice 5 - Cancellation, 25 June 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table IV on page 5 prints 1.250000 as the basic diameter for grade 48 old number 38, new MS19060-4840, breaking the 1/16 inch steps between 1.062500 and 1.187500 and repeating the 1.250000 printed two rows later for MS19060-4842. Table I on page 2 gives MS19060-4840 as 1-1/8, 1.125000.",
    "Model. Table IV on page 5 gives 1.250000 as the basic diameter of old grade 48 number 38, new MS19060-4840, but Table I on page 2 gives MS19060-4840 as 1-1/8, 1.125000, and Table IV prints 1.250000 again for MS19060-4842. The model builds MS19060-4840 at 1.125000 from Table I; the engineer must confirm that old number 38 is the 1.125000 ball."
   ]
  },
  {
   "id": "MS19068C w/AMENDMENT 1",
   "slug": "ms19068c-w-amendment-1",
   "title": "Nuts, plain, round, retaining, ball and roller bearing, regular series",
   "class": "Seawolf",
   "folder": "Seawolf/MS19068C w_AMENDMENT 1 Nuts, plain",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 198,
   "dimensions": 4158,
   "dimensions_met": 4152,
   "kind": "Detail specification sheet",
   "dated": "07 August 2026",
   "status": "Active, 7 August 2026",
   "newest": "Revision C Amendment 1 (amendment incorporated), 7 August 2026",
   "superseding": "",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5310-01-466-4424, nut, plain, round, MS19068 (Seawolf)"
   ],
   "files": {
    "package": "MS19068C w_AMENDMENT 1 package.pdf",
    "scan": "MS19068C w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MS19068C w_AMENDMENT 1 clean copy.pdf",
    "record": "MS19068C w_AMENDMENT 1 validation record.pdf",
    "sheet": "MS19068C w_AMENDMENT 1 3D model.pdf",
    "parts": "MS19068C w_AMENDMENT 1 parts list.pdf",
    "inspection": "MS19068C w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS19068-141-freecad.png",
    "pair": "Models/views/MS19068-141-pair.png",
    "record": "Models/views/MS19068-141-record.png",
    "front": "Models/views/MS19068-141-front.png",
    "top": "Models/views/MS19068-141-top.png",
    "right": "Models/views/MS19068-141-right.png",
    "cut": "Models/views/MS19068-141-cut.png"
   },
   "shown_part": "MS19068-141",
   "application": "FreeCAD 1.1.4",
   "modeled": "198 plain round retaining nuts, one per part number (dash numbers 00 to 40 of Table I, each in material numbers 1 to 6 of note 10): a ring of thickness D and outside diameter C with a plain bore at the thread major diameter, the 50\u00b0 outside chamfer down to the face diameter E on one face, the Figure 1 corner radius at the outside diameter of the other face, the chamfer J at the bore on both faces, and four equally spaced slots of width G cut to the diameter F with bottom corner radius R.",
   "not_modeled": [
    "The internal thread form (note 5, FED-STD-H28) and its threads per inch, minor diameter and pitch diameter limits from Table I; the bore is a plain cylinder at the major diameter.",
    "Material (note 1), hardness (note 2), protective coating and passivation (note 3) do not change the shape; the six material numbers of each dash number share one geometry.",
    "The 125 surface roughness of both faces (note 6), magnetic particle and liquid penetrant inspection (notes 7 and 8).",
    "The runout, parallelism and slot position tolerances apply to the made part; the solids are nominal, so each measures zero against them."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 732bc7124aed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,257 of 1,283 items agreed. All 21 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "709 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (561 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "198 solids in STEP AP242. 4,152 of 4,158 stated dimensions measure within limits; 6 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Amendment 1 (amendment incorporated), 7 August 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, column 'D / Thickness / Min': 0.553 then 0.548. Page 2 prints 0.548 for dash 15, below 0.553 for dash 14 while every other row rises; the printed value looks wrong for its series, a point for an engineer.",
    "Printed value to confirm. Table I, column 'D / Thickness / Max': 0.573 then 0.0604. Page 2 prints 0.0604 for dash 15 (four decimals, extra zero), far below its 0.548 minimum and the 0.020 spread of every other row; the printed value looks wrong, a point for an engineer.",
    "Printed value to confirm. Table I, row '15', 'd / thickness': 0.0604 then 0.548. Page 2 prints max 0.0604 below min 0.548 for dash 15; the scan shows these digits plainly, so the error is in the source document, a point for an engineer.",
    "Model. Table I prints dash 15 thickness D min 0.548 and D max 0.0604, so no thickness meets both; the dash 15 solids use the middle of the printed values, 0.3042, and fail the D check, and the engineer must confirm the intended limits (dash 14 prints 0.553 to 0.573 and dash 16 prints 0.584 to 0.604)."
   ]
  },
  {
   "id": "MS21299A",
   "slug": "ms21299a",
   "title": "Washer, countersunk and plain, for use with bolts and nuts up to and including 260 ksi Ftu",
   "class": "Seawolf",
   "folder": "Seawolf/MS21299A Washer, countersunk and plain",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 60,
   "dimensions": 360,
   "dimensions_met": 360,
   "kind": "Military specification sheet",
   "dated": "30 SEP 1994",
   "status": "Canceled, 19 April 1999",
   "newest": "Revision A Notice 1 - Cancellation, 19 April 1999",
   "superseding": "NASM21299",
   "preparing_activity": "DLA Troop Support - Industrial Hardware Items of Supply Stdz. (S/S by CC/CQ",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5310-01-483-3941, washer, recessed, MS21299C8K (Seawolf)"
   ],
   "files": {
    "package": "MS21299A package.pdf",
    "scan": "MS21299A legacy scan.pdf",
    "clean": "MS21299A clean copy.pdf",
    "record": "MS21299A validation record.pdf",
    "sheet": "MS21299A 3D model.pdf",
    "parts": "MS21299A parts list.pdf",
    "inspection": "MS21299A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS21299-10-freecad.png",
    "pair": "Models/views/MS21299-10-pair.png",
    "record": "Models/views/MS21299-10-record.png",
    "front": "Models/views/MS21299-10-front.png",
    "top": "Models/views/MS21299-10-top.png",
    "right": "Models/views/MS21299-10-right.png",
    "cut": "Models/views/MS21299-10-cut.png"
   },
   "shown_part": "MS21299-10",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid washers for every MS21299 part number: 15 countersunk (C3 to C24) and 15 plain (3 to 24) sizes, each in steel alloy and CRES (K) versions with identical geometry.",
   "not_modeled": [
    "Material, hardness, cadmium plate or passivation finish, the 125 microinch surface texture and burr-free condition.",
    "The approximate weights in Table I, which are reference values and not dimensions."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 5514936913a8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "469 of 496 items agreed. All 18 differences were settled against the page image. A second pass settled 1 from a closer look at the page.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "301 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (225 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "60 solids in STEP AP242. 360 of 360 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision A Notice 1 - Cancellation, 19 April 1999.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. For C10, C12 and C14, Table I gives \u00d8A .778 to .788, .903 to .913 and 1.028 to 1.038 over \u00d8D .627 to .631, .752 to .756 and .877 to .881, so a 45\u00b0 countersink is .072 to .0805 deep, while V is only .071 to .085; at mid-limits just .001 of straight bore remains, and at \u00d8A maximum, \u00d8D minimum and V minimum the countersink runs through the datum A face. The sheet sets no minimum bore land, so an engineer must decide whether one applies and which of \u00d8A, \u00d8D or V governs for these three sizes."
   ]
  },
  {
   "id": "MS21384(USAF)",
   "slug": "ms21384-usaf",
   "title": "Knobs - pointer illuminated and non-illuminated",
   "class": "Seawolf",
   "folder": "Seawolf/MS21384(USAF) Knobs - pointer illuminated and non-illuminated",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 48,
   "dimensions": 444,
   "dimensions_met": 444,
   "kind": "Military standard",
   "dated": "11 MAY 1973",
   "status": "Canceled, 25 September 2001",
   "newest": "Revision E Notice 2 - Cancellation, 25 September 2001",
   "superseding": "NASM21384",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5355-01-393-5136, knob, MS21384-04ABC (Seawolf)"
   ],
   "files": {
    "package": "MS21384(USAF) package.pdf",
    "scan": "MS21384(USAF) legacy scan.pdf",
    "clean": "MS21384(USAF) clean copy.pdf",
    "record": "MS21384(USAF) validation record.pdf",
    "sheet": "MS21384(USAF) 3D model.pdf",
    "parts": "MS21384(USAF) parts list.pdf",
    "inspection": "MS21384(USAF) inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS21384-13G-freecad.png",
    "pair": "Models/views/MS21384-13G-pair.png",
    "record": "Models/views/MS21384-13G-record.png",
    "front": "Models/views/MS21384-13G-front.png",
    "top": "Models/views/MS21384-13G-top.png",
    "right": "Models/views/MS21384-13G-right.png",
    "cut": "Models/views/MS21384-13G-cut.png"
   },
   "shown_part": "MS21384-13G",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MS21384 pointer knobs, one per series (0, 1, 2), shaft code (1-4) and style (Figures 1-4), each a 1.00 dia flange with its grip, the bottom counterbore and the round or D-flat shaft bore; the knob colour and indicia letters that complete the dash number do not change the solid.",
   "not_modeled": [
    "The setscrew holes for MS51021-102 or MS51021-132 setscrews (two at 90 degrees), whose size and height are not dimensioned on the sheet.",
    "The brass insert as a separate body; it is merged into the knob solid.",
    "The pointer indicia of Detail A (.15, .120 and .045 line widths, 45 degree angle) and the colours of Note 6.",
    "The five serrations of Figure 2 and the six serration grooves of Figure 4.",
    "The plan shape of the pointers in the top views (.31, .13, .43, .18 widths), the 30 degree face, .15 top chamfer and .20 offset of the sections, and the .031 flange edge of Figure 3.",
    "The .33 ounce weight limit of Note 3 and the illumination ratio of Table II."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, all scanned. SHA-256 ffb46a10c109.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "391 of 450 items agreed. All 41 differences were settled against the page image. A second pass settled 1 from the document's record in ASSIST. 2 marks outside the technical content are kept as transcription notes.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "20 checks on size series and limits. 1 break checked against the scan: it is as printed. A later review settled 1 printed value from the document's own conversions.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (108 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "48 solids in STEP AP242. 444 of 444 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 2 - Cancellation, 25 September 2001.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Each section prints a MAX height (.50 on Figures 1 and 2, .56 on Figure 3, .62 on Figure 4) that is .12 or .13 below the overall height of the same knob in its side view (.62, .62, .69, .75), and the sheet does not say what the MAX height measures. The engineer must decide which height governs the knob; the solids use the side-view heights.",
    "Model. Table III lists series 2 (aluminum) knobs, but neither Table II nor Table III says which styles they take; Table II only divides the styles into illuminated A to D and non-illuminated E to H. The engineer must decide which styles apply to aluminum knobs; the solids assume E to H.",
    "Model. The figures call for two setscrews 90 degrees apart (MS51021-102 for the 1/8 inch shaft, MS51021-132 for the 1/4 inch shaft) but give no hole size or height above the bottom. The engineer must set both before the holes can be made; the solids leave them out."
   ]
  },
  {
   "id": "MS27466K w/AMENDMENT 1",
   "slug": "ms27466k-w-amendment-1",
   "title": "Connectors, receptacle, electrical, wall mounting flange, crimp type, bayonet coupling, series I",
   "class": "Seawolf",
   "folder": "Seawolf/MS27466K w_AMENDMENT 1 Connectors, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 27,
   "dimensions": 747,
   "dimensions_met": 747,
   "kind": "Detail specification sheet",
   "dated": "27 Aug 2024",
   "status": "Active, 27 August 2024",
   "newest": "Revision K Amendment 1 (amendment incorporated), 27 August 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5935-01-563-6105, connector, receptacle, electrical, MS27466 (Seawolf)"
   ],
   "files": {
    "package": "MS27466K w_AMENDMENT 1 package.pdf",
    "scan": "MS27466K w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MS27466K w_AMENDMENT 1 clean copy.pdf",
    "record": "MS27466K w_AMENDMENT 1 validation record.pdf",
    "sheet": "MS27466K w_AMENDMENT 1 3D model.pdf",
    "parts": "MS27466K w_AMENDMENT 1 parts list.pdf",
    "inspection": "MS27466K w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS27466P25-freecad.png",
    "pair": "Models/views/MS27466P25-pair.png",
    "record": "Models/views/MS27466P25-record.png",
    "front": "Models/views/MS27466P25-front.png",
    "top": "Models/views/MS27466P25-top.png",
    "right": "Models/views/MS27466P25-right.png",
    "cut": "Models/views/MS27466P25-cut.png"
   },
   "shown_part": "MS27466P25",
   "application": "FreeCAD 1.1.4",
   "modeled": "27 envelope solids, one per class E, P and T at each shell size 9 to 25: a square flange S by K with chamfered corners and four P holes at R BSC; a shell cylinder at the MIL-DTL-38999 F diameter from the front end, M ahead of the flange front face, with three bayonet pins (L dia at K from the front end, E dia over the pins); and a rear end to L max for the class behind the flange rear face, at the VV accessory thread major diameter for classes E and T (with the class T projections as a ring at HH dia) and at YP max over the potting form for class P.",
   "not_modeled": [
    "The front and rear end configuration that figure 1 refers to the procurement specifications, beyond the outside diameters taken from MIL-DTL-38999: the shell bore, inserts, contacts, keys and keyways, the class E grommet and the class P potting compound.",
    "The main keyway and keyway positions (note 3) and the other interface dimensions, which are given in MIL-DTL-38999, including the 85 degree BSC angle that locates a feature on the shell front, and the insert arrangements, which are given in MIL-STD-1560.",
    "The rear end detail of MIL-DTL-38999 figure 8: the VV thread form and the 45 degree chamfer to the root of the first thread, the number (NN) and tooth form of the class T projections, the grommet and sealing surface diameters (A, PP), and the inside diameter (XP) and taper of the class P potting form.",
    "The .266 max dimension, measured from the flange rear face to the rear end of the contact drawn in the broken-out section behind the flange, which needs the inserts and contacts.",
    "The finish, insert arrangement, contact style and polarizing position of the part number, which do not change the flange or lengths; one solid stands for each class and shell size.",
    "The marking surface and surface finish."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 fbe5d9f3aa8f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "437 of 466 items agreed. All 15 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "154 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (156 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "27 solids in STEP AP242. 747 of 747 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K Amendment 1 (amendment incorporated), 27 August 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Neither the sheet nor MIL-DTL-38999 gives the axial layout of the rear end behind the flange (where the VV thread starts, and where the class P potting form starts and how it tapers), so the VV major diameter and the YP max diameter run from the flange rear face to L max; the rear end layout must be confirmed before the envelope is used as a space claim.",
    "Model. Figure 1 references datum GG in the hole position frame but marks no feature as GG; note 4 gives only its gauge rule, so the datum feature must be confirmed.",
    "Model. The metric table pairs .115 in with 2.29 mm, but .115 in is 2.92 mm; note 2 makes the metric values information only, so the inch value governs and the metric entry needs correction."
   ]
  },
  {
   "id": "MS3106D",
   "slug": "ms3106d",
   "title": "Connector, plug, electric, straight, solder contacts, AN type",
   "class": "Seawolf",
   "folder": "Seawolf/MS3106D Connector, plug",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 10,
   "solids": 168,
   "dimensions": 2052,
   "dimensions_met": 2044,
   "kind": "Military specification sheet",
   "dated": "20 AUG 92",
   "status": "Canceled, 23 December 2009",
   "newest": "Revision D Notice 2 - Cancellation, 23 December 2009",
   "superseding": "SAE-AS31061",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5935-01-239-8210, connector, plug, electrical, MS3106A18-10P (Seawolf)"
   ],
   "files": {
    "package": "MS3106D package.pdf",
    "scan": "MS3106D legacy scan.pdf",
    "clean": "MS3106D clean copy.pdf",
    "record": "MS3106D validation record.pdf",
    "sheet": "MS3106D 3D model.pdf",
    "parts": "MS3106D parts list.pdf",
    "inspection": "MS3106D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS3106E20-XXS-freecad.png",
    "pair": "Models/views/MS3106E20-XXS-pair.png",
    "record": "Models/views/MS3106E20-XXS-record.png",
    "front": "Models/views/MS3106E20-XXS-front.png",
    "top": "Models/views/MS3106E20-XXS-top.png",
    "right": "Models/views/MS3106E20-XXS-right.png",
    "cut": "Models/views/MS3106E20-XXS-cut.png"
   },
   "shown_part": "MS3106E20-XXS",
   "application": "FreeCAD 1.1.4",
   "modeled": "168 envelope solids of the MS3106 straight plug, one for every shell size of classes A, K, E, R and F in style P (pin insert) and style S (socket insert), each with the shell front tube E and bore F, the insert I at its stated location, the coupling ring Q with the coupling thread A as a bore ending at the shoulder (B, J), the keyway, and the rear end: the V accessory thread over W for classes A and K, and the Z cable adapter, wire grommet seal or cable clamp with cable clearance X for classes E, R and F.",
   "not_modeled": [
    "Insert arrangements, contacts and alternate insert positions W, X, Y and Z, which MIL-STD-1651 defines; each solid stands for every insert arrangement of its class, shell size and style.",
    "The split shell fastening means that Z limits (class B only in the class A table; the class K table and view), with the .625 max phantom lines: the sheet gives neither their shape nor their place along the plug. Z is recorded as a parameter.",
    "The MS28900 packing of classes R and F and its groove (Detail C: \u00d8Y +.005 -.010, .047 +.005 -.000, .020 \u00b1.002, R .020 \u00b1.002), which the sheet does not place along the axis. \u00d8Y and the packing dash number are recorded as parameters.",
    "The class F saddle clamp bars and screws and their closed width NN (recorded as a parameter); the clamp is the Z envelope with the X opening.",
    "The .014 MAX offset drawn at the bottom of the coupling cavity, the .062 at the rear end of the V thread, the undercut of .109 max (.108 on page 3) that W may include, and the 45\u00b0 chamfers to the bottom of the thread at the coupling ring front and the rear end.",
    "Resilient insert variants of class A: note (b) lets a dimension be .109 less (the table's JJ column carries marker (a), which is now the cancellation note), and note (c) puts a resilient socket insert .047 +.000 -.047 beyond the shell; the solids use the hard insert values.",
    "The .375 longer L for size 0 contacts of classes R and F (note (b)); the sheet does not say which shell sizes take size 0 contacts.",
    "For shell size 10SL the shell bore, the keyway and the insert location (JJ, C or .047 shoulder to insert), which need a shell bore the sheet does not give (no F).",
    "Thread form, knurling, materials, finishes and marking."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "10 pages, all scanned. SHA-256 baa242f02099.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,927 of 1,994 items agreed. 69 differences went to a third reader. A second pass settled 3 from a second printing in the document, 3 from the sheet's layout (a point the scan did not print). 5 readings remain open.",
     "result": "5 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "947 checks on size series and limits. 42 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 5 tables (1,210 cells), 12 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "168 solids in STEP AP242. 2,044 of 2,052 stated dimensions measure within limits; 8 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision D Notice 2 - Cancellation, 23 December 2009. ASSIST also holds Revision D Amendment 1 (7 July 2000). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 1, text: read as 143004, could be 143804.",
    "Open reading. Page 3, callout LENGTH OF MIN USABLE THREAD (W) MAY INCLUDE MAX .108 UNDERCUT: read as .108, could be .109.",
    "Open reading. Page 3, callout .016 +.000 -.048: read as .016, could be .018.",
    "Open reading. Page 5, callout .047 \u00b1 .031 SHOULDER TO INSERT: read as \u00b1, could be +.",
    "Open reading. Page 9, rows 10S and 10SL, column Z MAX ACROSS CLAMP: read as 1.046.",
    "Printed value to confirm. The table on page 7, row '8S', columns 'E +.000 -.015 \u00d8 outside' and '\u00d8Y +.005 -.010': 0.365 then 0.355. Page 7 prints .365 in E and .355 in \u00d8Y on the 8S line as agreed, and the Class F table on page 9 prints the same pair for 8S; \u00d8Y equals E in every other row, so the 8S groove diameter .355 (E less the .010 minus tolerance) is a point for an engineer to confirm.",
    "Printed value to confirm. The table on page 9, row '8S', columns 'E +.000 -.015 \u00d8 outside' and '\u00d8Y +.005 -.010': 0.365 then 0.355. Page 9 prints .365 in E and .355 in \u00d8Y on the 8S line, the same pair as the Class R table on page 7; \u00d8Y equals E in every other row of this table, so the 8S groove diameter .355 (E less the .010 minus tolerance) is a point for an engineer to confirm.",
    "Model. Class F size 22 prints coupling thread A as 1-1/8-18 (major diameter 1.125), smaller than its own shell outside diameter E (1.160 to 1.175) and unlike the 1-3/8-18 that classes A, K, E and R print for size 22, so the two solids built as printed have no coupling cavity and fail their A, B, J and insert location checks. The engineer must decide whether class F size 22 takes the 1-3/8-18 coupling thread of the other classes; Amendment 1 does not reprint the table.",
    "Model. Shell size 10SL gives E .446 +.000 -.015 and \u00d8I .440 max with no F, which leaves no room for a shell wall around the insert; the engineer must confirm how the 10SL shell holds the insert and how deep the style P pins sit.",
    "Model. The class K style S solids place the socket insert .008 below the shell face from the page 3 callout .016 +.000 -.048, whose first value is still an open reading (.016 or .018).",
    "Model. The class E style P solids place the pin insert .047 in front of the shoulder from the page 5 callout .047 \u00b1 .031, whose sign is still an open reading (\u00b1 or +).",
    "Model. The class F size 10S and 10SL solids use Z 1.046, an open reading carried down from 8S where the Z column has no rule under 10SL; the cells may be blank."
   ]
  },
  {
   "id": "MS3456",
   "slug": "ms3456",
   "title": "Connectors, plug, electrical, rear release, crimp contact, AN type",
   "class": "Seawolf",
   "folder": "Seawolf/MS3456 Connectors, plug",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 2,
   "solids": 30,
   "dimensions": 120,
   "dimensions_met": 120,
   "kind": "Military standard",
   "dated": "23 MAR 76",
   "status": "Canceled, 23 December 2009",
   "newest": "Revision D Notice 1 - Cancellation, 23 December 2009",
   "superseding": "SAE-AS34561",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5935-01-239-8210, connector, plug, electrical, MS3456W18-10P (Seawolf)"
   ],
   "files": {
    "package": "MS3456 package.pdf",
    "scan": "MS3456 legacy scan.pdf",
    "clean": "MS3456 clean copy.pdf",
    "record": "MS3456 validation record.pdf",
    "sheet": "MS3456 3D model.pdf",
    "parts": "MS3456 parts list.pdf",
    "inspection": "MS3456 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS3456_22_size_8_10_contacts_-freecad.png",
    "pair": "Models/views/MS3456_22_size_8_10_contacts_-pair.png",
    "record": "Models/views/MS3456_22_size_8_10_contacts_-record.png",
    "front": "Models/views/MS3456_22_size_8_10_contacts_-front.png",
    "top": "Models/views/MS3456_22_size_8_10_contacts_-top.png",
    "right": "Models/views/MS3456_22_size_8_10_contacts_-right.png",
    "cut": "Models/views/MS3456_22_size_8_10_contacts_-cut.png"
   },
   "shown_part": "MS3456 22 (size 8 & 10 contacts)",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids for each MS3456 shell size and contact-size length group: a plain cylinder at the maximum coupling ring diameter Q and maximum overall length L.",
   "not_modeled": [
    "Coupling ring, body, gasket, blue stripe and polarizing keyway detail, which the sheet shows but does not dimension (front and rear end configuration is in MIL-C-5015).",
    "Insert arrangements and contacts (MIL-STD-1651), classes, material designators and alternate insert positions; each solid covers every part number of its shell size and contact group."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 95fc4813226f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "283 of 342 items agreed. 55 differences went to a third reader. A second pass settled 1 from the same value on another sheet of the series, 1 from the document's record in ASSIST. 2 readings remain open.",
     "result": "2 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "58 checks on size series and limits. 2 breaks checked against the scan: all are as printed. 49 values are also printed on 9 other sheets of the series: all match.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (76 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "30 solids in STEP AP242. 120 of 120 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision D Notice 1 - Cancellation, 23 December 2009.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 1, Decimal tolerance: read as \u00b1.016, could be \u00b1.015 or \u00b1.018.",
    "Open reading. Page 1, First wire spec: read as MIL-W-27135, could be MIL-W-27125."
   ]
  },
  {
   "id": "MS51811G",
   "slug": "ms51811g",
   "title": "Tee, tube, flareless type hydraulic",
   "class": "Seawolf",
   "folder": "Seawolf/MS51811G Tee, tube",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 29,
   "dimensions": 261,
   "dimensions_met": 261,
   "kind": "Detail specification sheet",
   "dated": "30 March 2022",
   "status": "Active, 30 March 2022",
   "newest": "Revision G, 30 March 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4730-01-417-1278, tee, tube, MS51811-3SSA (Seawolf)"
   ],
   "files": {
    "package": "MS51811G package.pdf",
    "scan": "MS51811G legacy scan.pdf",
    "clean": "MS51811G clean copy.pdf",
    "record": "MS51811G validation record.pdf",
    "sheet": "MS51811G 3D model.pdf",
    "parts": "MS51811G parts list.pdf",
    "inspection": "MS51811G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS51811-59-freecad.png",
    "pair": "Models/views/MS51811-59-pair.png",
    "record": "Models/views/MS51811-59-record.png",
    "front": "Models/views/MS51811-59-front.png",
    "top": "Models/views/MS51811-59-top.png",
    "right": "Models/views/MS51811-59-right.png",
    "cut": "Models/views/MS51811-59-cut.png"
   },
   "shown_part": "MS51811-59",
   "application": "FreeCAD 1.1.4",
   "modeled": "29 tee bodies, one per body dash number (-31 to -59 for assemblies -1 to -29: 13 standard and 16 nonstandard sizes), each a body block with a B thread on ends 1, 2 and 3, the end faces at M from the crossing axis, and a D drill from each end into the junction.",
   "not_modeled": [
    "The nut (MS51823) and sleeve (MS51825) on each end that make up the assembly (note 6), and the tube.",
    "The 24 degree flareless tube-end cones, tube counterbores and tube stops, the thread reliefs and the body's own shape, which Figure 1 draws without dimensions and note 4 leaves to SAE-J514.",
    "Thread form, pitch and class limits of the B threads (ASME B1.1, note 5), end chamfers and edge breaks (note 3).",
    "Material and finish designators, plating and marking (MIL-DTL-18866), which do not change the body geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 0 scanned. SHA-256 1cbd236a2bcf.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,413 of 1,479 items agreed. All 4 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "229 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 5 tables (538 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "29 solids in STEP AP242. 261 of 261 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G, 30 March 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The tube OD cells .3125 (7.936), .3125 (7.95), .3125 (7.950) (assemblies -5, -6, -7) print metric equivalents that do not round from 7.9375 mm; the inch values govern (note 2) and the tube OD is not part of the body solid."
   ]
  },
  {
   "id": "MS51812H",
   "slug": "ms51812h",
   "title": "Nipple, tube, bulkhead, flareless type hydraulic",
   "class": "Seawolf",
   "folder": "Seawolf/MS51812H Nipple, tube",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 5,
   "solids": 13,
   "dimensions": 91,
   "dimensions_met": 91,
   "kind": "Detail specification sheet",
   "dated": "30 March 2022",
   "status": "Active, 30 March 2022",
   "newest": "Revision H, 30 March 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4730-01-417-1576, nipple, tube, MS51812-3SSA (Seawolf)"
   ],
   "files": {
    "package": "MS51812H package.pdf",
    "scan": "MS51812H legacy scan.pdf",
    "clean": "MS51812H clean copy.pdf",
    "record": "MS51812H validation record.pdf",
    "sheet": "MS51812H 3D model.pdf",
    "parts": "MS51812H parts list.pdf",
    "inspection": "MS51812H inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS51812-27-freecad.png",
    "pair": "Models/views/MS51812-27-pair.png",
    "record": "Models/views/MS51812-27-record.png",
    "front": "Models/views/MS51812-27-front.png",
    "top": "Models/views/MS51812-27-top.png",
    "right": "Models/views/MS51812-27-right.png",
    "cut": "Models/views/MS51812-27-cut.png"
   },
   "shown_part": "MS51812-27",
   "application": "FreeCAD 1.1.4",
   "modeled": "13 bulkhead tube nipple bodies, one per body dash number (-21 to -33 for assemblies -1 to -13): a B thread at each end, the C2 hex placed by I and I1, and the D drill end to end, at overall length L4.",
   "not_modeled": [
    "The 24 degree flareless tube-end cones, tube counterbores and tube stops drawn at both ends, which this sheet leaves to SAE-J514 (note 4) and does not dimension.",
    "The thread relief groove drawn beside the hex on the bulkhead side and the small step before the hex on the nut side, which Figure 1 draws without dimensions.",
    "Thread form, pitch, class tolerances and end chamfers of the B threads; hex corner chamfers and edge breaks (note 3).",
    "The nuts (MS51823), sleeve (MS51825) and bulkhead nut (MS51860) of the assembly, and the tube, which other documents define.",
    "Material and finish designators (MIL-DTL-18866) and sleeve style A or B, which do not change the body geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 0e85e126ba2f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,005 of 1,054 items agreed. 27 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "80 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (167 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "13 solids in STEP AP242. 91 of 91 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H, 30 March 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure 1, Inside the lower hex face of the right view, at the tip of the C2 HEX leader: read as (not transcribed), could be 6.",
    "Model. Assembly -4, Tube OD .3125 (7.936) prints a metric equivalent that does not round from the inch value (7.9375 mm); the inch value governs (note 2), and the tube OD is not part of the body solid.",
    "Model. The PIN example on page 3 prints 1.000 inch (2.540 mm), but 1.000 inch is 25.40 mm, and the page 2 table prints the -10 tube OD as 1.0000 (25.400); the inch value governs (note 2)."
   ]
  },
  {
   "id": "MS51840F w/Amendment 1",
   "slug": "ms51840f-w-amendment-1",
   "title": "Fittings, hydraulic tube, flareless type, plug, machine thread, O-ring",
   "class": "Seawolf",
   "folder": "Seawolf/MS51840F w_Amendment 1 Fittings, hydraulic tube",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 13,
   "dimensions": 221,
   "dimensions_met": 221,
   "kind": "Detail specification sheet",
   "dated": "8 September 2022",
   "status": "Active, 8 September 2022",
   "newest": "Revision F Amendment 1 (amendment incorporated), 8 September 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5365-01-501-1272, plug, machine thread, MS51840 (Seawolf)"
   ],
   "files": {
    "package": "MS51840F w_Amendment 1 package.pdf",
    "scan": "MS51840F w_Amendment 1 legacy scan.pdf",
    "clean": "MS51840F w_Amendment 1 clean copy.pdf",
    "record": "MS51840F w_Amendment 1 validation record.pdf",
    "sheet": "MS51840F w_Amendment 1 3D model.pdf",
    "parts": "MS51840F w_Amendment 1 parts list.pdf",
    "inspection": "MS51840F w_Amendment 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS51840-27-freecad.png",
    "pair": "Models/views/MS51840-27-pair.png",
    "record": "Models/views/MS51840-27-record.png",
    "front": "Models/views/MS51840-27-front.png",
    "top": "Models/views/MS51840-27-top.png",
    "right": "Models/views/MS51840-27-right.png",
    "cut": "Models/views/MS51840-27-cut.png"
   },
   "shown_part": "MS51840-27",
   "application": "FreeCAD 1.1.4",
   "modeled": "13 plugs, one per dash number -21 to -33 (the material and finish letter does not change the geometry): a hex head chamfered on both faces, an O-ring undercut against the head with its two corner radii and 45 degree flank, a straight-thread shank with a 45 degree end chamfer, and the optional hole D with its drill point Q from the outer head face.",
   "not_modeled": [
    "Thread form, class 2A limits and thread runout of the B thread; the 63 microinch finish in the undercut and burr removal (note 3); material, finish and marking.",
    "The plug without the optional hole, which the sheet allows; the O-ring, procured separately to SAE-AS28778.",
    "Dimensions the sheet refers to SAE-J514 (note 4), such as the hex across corners, the head thickness and the drill point angle; tube OD and wrench size, which identify the size but do not dimension the plug."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 a8a18302f085.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,147 of 1,164 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "48 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 4 tables (212 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "13 solids in STEP AP242. 221 of 221 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 1 (amendment incorporated), 8 September 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS51895B w/ Amendment 1",
   "slug": "ms51895b-w-amendment-1",
   "title": "Nipple, tube, union, reducer for use with O-ring, flareless type, hydraulic",
   "class": "Seawolf",
   "folder": "Seawolf/MS51895B w_ Amendment 1 Nipple, tube",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 3,
   "dimensions": 27,
   "dimensions_met": 27,
   "kind": "Detail specification sheet",
   "dated": "12 March 2021",
   "status": "Active, 12 March 2021",
   "newest": "Revision B Amendment 1 (amendment incorporated), 12 March 2021",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4730-01-426-2492, reducer, tube, MS51895-1SSA (Seawolf)"
   ],
   "files": {
    "package": "MS51895B w_ Amendment 1 package.pdf",
    "scan": "MS51895B w_ Amendment 1 legacy scan.pdf",
    "clean": "MS51895B w_ Amendment 1 clean copy.pdf",
    "record": "MS51895B w_ Amendment 1 validation record.pdf",
    "sheet": "MS51895B w_ Amendment 1 3D model.pdf",
    "parts": "MS51895B w_ Amendment 1 parts list.pdf",
    "inspection": "MS51895B w_ Amendment 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS51895-12-freecad.png",
    "pair": "Models/views/MS51895-12-pair.png",
    "record": "Models/views/MS51895-12-record.png",
    "front": "Models/views/MS51895-12-front.png",
    "top": "Models/views/MS51895-12-top.png",
    "right": "Models/views/MS51895-12-right.png",
    "cut": "Models/views/MS51895-12-cut.png"
   },
   "shown_part": "MS51895-12",
   "application": "FreeCAD 1.1.4",
   "modeled": "3 reducer union nipple bodies, one per body dash number (-11, -12, -13 for assemblies -1, -2, -3): B and B1 straight-thread ends, the G1 and G2 O-ring grooves beside the C2 hex, and the D and D1 drilled passage, at overall length L1.",
   "not_modeled": [
    "The 24 degree flareless tube-end cones, tube counterbores and tube stops drawn at both ends, which this sheet leaves to SAE-J514 (note 4) and does not dimension.",
    "Thread form, thread class tolerances and end chamfers of the B and B1 threads; hex corner chamfers and edge breaks (note 3).",
    "The nuts (MS51823), sleeves (MS51825) and SAE-AS28778 O-rings of the assembly, and the tube OD, which belong to other documents or to the tube.",
    "Material and finish designators (MIL-DTL-18866) and sleeve style A or B, which do not change the body geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 c9c4ef2017dd.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "898 of 899 items agreed. All 1 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (51 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "3 solids in STEP AP242. 27 of 27 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Amendment 1 (amendment incorporated), 12 March 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The page 2 table gives S max (.60, .69, .88) but Figure 1 does not show where S is measured; the model takes S as the depth of the D drill from the B end, where Figure 1 draws the bore step, and checks it on that reading only.",
    "Model. Figure 1 labels both O-ring grooves G2 and shows no G1, while the table gives G1 and G2; the model puts G1 at the B end because G1 is just under the B thread size and G2 just under the B1 thread size on every row.",
    "Model. The -2 B thread is printed .7500-24 UNF-2A, but ASME B1.1 gives the .7500 UNF thread 16 threads per inch and has no 24-thread series; the model uses only the .7500 major diameter, so the pitch must be confirmed.",
    "Model. Assembly -1, column 'Tube OD nom.': .2500 (6.230) prints a metric equivalent that does not match the inch value (6.350 mm); the inch value governs (note 2) and the tube is not part of the body solid."
   ]
  },
  {
   "id": "MS51937",
   "slug": "ms51937",
   "title": "Bolt,eye,shoulder UNC-2A and UNF-2A",
   "class": "Seawolf",
   "folder": "Seawolf/MS51937 Bolt, eye",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 20,
   "dimensions": 260,
   "dimensions_met": 260,
   "kind": "Military standard",
   "dated": "27 SEP 85",
   "status": "Inactive, 27 October 2026",
   "newest": "Revision C Notice 3 - Validation, 27 October 2026",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5306-01-503-0336, bolt, eye, MS51937-2C (Seawolf)"
   ],
   "files": {
    "package": "MS51937 package.pdf",
    "scan": "MS51937 legacy scan.pdf",
    "clean": "MS51937 clean copy.pdf",
    "record": "MS51937 validation record.pdf",
    "sheet": "MS51937 3D model.pdf",
    "parts": "MS51937 parts list.pdf",
    "inspection": "MS51937 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS51937-6-freecad.png",
    "pair": "Models/views/MS51937-6-pair.png",
    "record": "Models/views/MS51937-6-record.png",
    "front": "Models/views/MS51937-6-front.png",
    "top": "Models/views/MS51937-6-top.png",
    "right": "Models/views/MS51937-6-right.png",
    "cut": "Models/views/MS51937-6-cut.png"
   },
   "shown_part": "MS51937-6",
   "application": "FreeCAD 1.1.4",
   "modeled": "Twenty solid forged shoulder eye bolts, one for each Table I dash number (1 to 15 and 21 to 25), each a round-section eye, neck, shoulder, shank with the radius under the shoulder, and a plain thread cylinder.",
   "not_modeled": [
    "Finish code C (cadmium plate) gives the same solid as the uncoated part, so MS51937-1C and the other C part numbers share the dash number's model.",
    "Screw threads to FED-STD-H28/2, the eye-to-neck blend, forging draft and marking.",
    "Material, proof load and safe working loads at 0, 45 and 90 degrees."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 a6beedeef872.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "551 of 844 items agreed. All 108 differences were settled against the page image. A second pass settled 4 from a closer look at the page.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "546 checks on size series and limits. 46 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (720 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "20 solids in STEP AP242. 260 of 260 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: inactive. Newest entry: Revision C Notice 3 - Validation, 27 October 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table I prints two values, one above the other, in every dimension cell except \u00d8D and G and does not say what they are; the solids take the upper as the minimum and the lower as the maximum and build at the middle, where \u00d8C + 2\u00d8E meets \u00d8D and \u00d8C/2 + \u00d8E + J + B meets F. The engineer must confirm that the two values are the lower and upper limits of each dimension."
   ]
  },
  {
   "id": "MS90376E",
   "slug": "ms90376e",
   "title": "Cap, dust, plastic, electric connector",
   "class": "Seawolf",
   "folder": "Seawolf/MS90376E Cap, dust",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 1,
   "solids": 31,
   "dimensions": 186,
   "dimensions_met": 186,
   "kind": "Military specification sheet",
   "dated": "25 May 93",
   "status": "Canceled, 17 May 2010",
   "newest": "Revision E Notice 2 - Cancellation, 17 May 2010",
   "superseding": "Notice 2 for Replacement Information",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "5340-01-431-3176, cap, protective, dust and moisture, MS90376-20YB (Seawolf)"
   ],
   "files": {
    "package": "MS90376E package.pdf",
    "scan": "MS90376E legacy scan.pdf",
    "clean": "MS90376E clean copy.pdf",
    "record": "MS90376E validation record.pdf",
    "sheet": "MS90376E 3D model.pdf",
    "parts": "MS90376E parts list.pdf",
    "inspection": "MS90376E inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS90376-22R-freecad.png",
    "pair": "Models/views/MS90376-22R-pair.png",
    "record": "Models/views/MS90376-22R-record.png",
    "front": "Models/views/MS90376-22R-front.png",
    "top": "Models/views/MS90376-22R-top.png",
    "right": "Models/views/MS90376-22R-right.png",
    "cut": "Models/views/MS90376-22R-cut.png"
   },
   "shown_part": "MS90376-22R",
   "application": "FreeCAD 1.1.4",
   "modeled": "Flanged cylindrical dust caps, one solid per dash number (-8Y through -48R), with head diameter A, head thickness .125, body diameter D, closed end wall E and bore C of depth B.",
   "not_modeled": [
    "Material types A, B and C, the F and B suffixes and the conductive B suffix change only material and color, so one solid serves every suffix of a dash number.",
    "The optional head design, the 1 degree maximum draft, color coding and the raised part number and manufacturer marking are not modeled."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "1 page, all scanned. SHA-256 6337f0df5f22.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "342 of 436 items agreed. 78 differences went to a third reader. A second pass settled 1 from another revision. 10 readings remain open. 3 marks outside the technical content are kept as transcription notes.",
     "result": "10 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "120 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (217 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "31 solids in STEP AP242. 186 of 186 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 2 - Cancellation, 17 May 2010.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 1, row -24R, column \u00d8C: read as 1.463, could be 1.461.",
    "Open reading. Page 1, row -20R, column \u00d8A: read as 1.465, could be 1.455.",
    "Open reading. Page 1, row -22R, column \u00d8A: read as 1.590, could be 1.550.",
    "Open reading. Page 1, row -22Y, column \u00d8C: read as 1.270, could be 1.278.",
    "Open reading. Page 1, row -24R, column \u00d8D: read as 1.531, could be 1.533.",
    "Open reading. Page 1, row -25Y, column \u00d8D: read as 1.580, could be 1.560.",
    "Open reading. Page 1, row -36R, column \u00d8D: read as 2.290, could be 2.280.",
    "Open reading. Page 1, row -36R, column B: read as .600, could be 800.",
    "Open reading. Page 1, row -16Y, column \u00d8D: read as .963, could be .953.",
    "Open reading. Page 1, rows -20R to -24R, column SUPERSEDES: read as MS25178-20 ... MS25178-24."
   ]
  },
  {
   "id": "ZZ-H-461E",
   "slug": "zz-h-461e",
   "title": "Hose and hose assembly, rubber, gas (acetylene-hydrogen, air and oxygen)",
   "class": "Seawolf",
   "folder": "Seawolf/ZZ-H-461E Hose and hose assembly, rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "11 NOVEMBER 1986",
   "status": "Canceled, 16 September 1997",
   "newest": "Revision E Notice 2 - Cancellation, 16 September 1997",
   "superseding": "RMA IP-7 and CGA-E1",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4720-01-446-7324, hose, nonmetallic, ZZ-H-461 (Seawolf)"
   ],
   "files": {
    "package": "ZZ-H-461E package.pdf",
    "scan": "ZZ-H-461E legacy scan.pdf",
    "clean": "ZZ-H-461E clean copy.pdf",
    "record": "ZZ-H-461E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, all scanned. SHA-256 355dd81f4a20.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,025 of 3,299 items agreed. All 13 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "52 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 1 table (133 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "ZZ-H-461E is the federal specification for style A (single line) and style B (dual line) rubber gas hose and hose assemblies and has no drawing: Table I gives, for each inside diameter from 1/8 to 3/8 inch (plus or minus 0.023), the outside diameter of each style (plus or minus 0.031, none printed for style B at 1/8), the minimum tube and cover thickness, the braided ply count and the tensile, elongation, friction and pressure values, while the order sets the hose length (3.2.7), the web joining the two style B lines has no dimension, acetylene-hydrogen and oxygen couplings are referred to MS15011 (3.2.2) and ferrules get only a minimum length and thickness (3.2.3), so the document fixes the cross section of each hose line but no complete part to model.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 2 - Cancellation, 16 September 1997.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "ZZ-H-500C",
   "slug": "zz-h-500c",
   "title": "Hose, rubber, and hose assemblies, rubber: pneumatic (yarn or fabric reinforced)",
   "class": "Seawolf",
   "folder": "Seawolf/ZZ-H-500C Hose, rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "September 10, 1987",
   "status": "Canceled, 3 July 2001",
   "newest": "Revision C Notice 1 - Cancellation, 3 July 2001",
   "superseding": "A-A-59565",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 1,
   "by_class": {
    "Seawolf": 1
   },
   "stock_examples": [
    "4720-01-446-7324, hose, nonmetallic, ZZ-H-500 (Seawolf)"
   ],
   "files": {
    "package": "ZZ-H-500C package.pdf",
    "scan": "ZZ-H-500C legacy scan.pdf",
    "clean": "ZZ-H-500C clean copy.pdf",
    "record": "ZZ-H-500C validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, all scanned. SHA-256 8a1b9fabbdef.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,450 of 3,639 items agreed. All 16 differences were settled against the page image. A second pass settled 1 from the document's record in ASSIST, 1 from a closer look at the page.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "150 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 4 tables (274 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "ZZ-H-500C is the federal specification for yarn, cord or fabric reinforced rubber pneumatic hose and hose assemblies and has no drawing: it sets the construction as an inner rubber tube, reinforcement plies and an outer rubber cover (3.3), gives the inside diameter sizes from 1/4 to 2 inch with their tolerances, the minimum tube and cover thicknesses and the proof, burst, adhesion, tensile and elongation values (Table I), lengths in 25-foot multiples (3.6), maximum working pressures (Table III) and two-digit size codes (Table IV), gives no outside diameter or reinforcement ply thickness, so neither the hose wall nor its outside diameter is fixed, and names couplings to WW-C-633, MIL-C-3486, MIL-C-4109 or standard brass stems and ferrules (3.4) and clamps to WW-C-440 or an interlocking type (3.5) without giving their dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision C Notice 1 - Cancellation, 3 July 2001. ASSIST also holds Revision C Amendment 1 (20 March 1992). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "ZZ-H-601E",
   "slug": "zz-h-601e",
   "title": "Hose and hose assemblies, rubber (yarn or fabric reinforced) water service",
   "class": "Seawolf",
   "folder": "Seawolf/ZZ-H-601E Hose and hose assemblies, rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 15,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "June 11, 1990",
   "status": "Canceled, 29 June 2001",
   "newest": "Revision E Notice 1 - Cancellation, 29 June 2001",
   "superseding": "A-A-59567",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 2,
   "by_class": {
    "Seawolf": 2
   },
   "stock_examples": [
    "4720-01-432-3004, hose assembly, nonmetallic, ZZ-H-601-1-1-24-25MOD1 (Seawolf)",
    "4720-01-432-3005, hose assembly, nonmetallic, ZZ-H-601-1-1-24-25MOD2 (Seawolf)"
   ],
   "files": {
    "package": "ZZ-H-601E package.pdf",
    "scan": "ZZ-H-601E legacy scan.pdf",
    "clean": "ZZ-H-601E clean copy.pdf",
    "record": "ZZ-H-601E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "15 pages, all scanned. SHA-256 dd4988d6597d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,864 of 3,897 items agreed. All 16 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "254 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 4 tables (385 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "ZZ-H-601E is the federal specification for yarn, cord or fabric reinforced rubber water hose and hose assemblies and has no drawing: it sets the construction as an inner rubber tube, reinforcement plies and an outer rubber cover (3.3), gives the inside diameter sizes from 0.25 to 4.0 inch with their tolerances, the minimum tube and cover thicknesses, the minimum ply counts and the proof, burst, friction, tensile and elongation values (Table I), lengths in 25-foot multiples, or 50 feet above 1.50 inch (3.5), maximum working pressures (Table III) and two-digit size codes (Table IV), gives no outside diameter or reinforcement ply thickness, so neither the hose wall nor its outside diameter is fixed, and refers couplings to WW-C-624 and clamps to WW-C-440 or describes an interlocking clamp type (3.6) without giving their dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: canceled. Newest entry: Revision E Notice 1 - Cancellation, 29 June 2001.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-59326/23A",
   "slug": "a-a-59326-23a",
   "title": "Coupling half, nipple adapter, female by external groove pipe, type XXIII",
   "class": "Other platforms",
   "folder": "Other platforms/A-A-59326_23A Coupling half, nipple adapter",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 9,
   "dimensions": 90,
   "dimensions_met": 90,
   "kind": "Commercial item description specification sheet",
   "dated": "12 May 2014",
   "status": "Active, 20 May 2025",
   "newest": "Revision A Notice 2 - Validation, 20 May 2025",
   "superseding": "",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "A-A-59326_23A package.pdf",
    "scan": "A-A-59326_23A legacy scan.pdf",
    "clean": "A-A-59326_23A clean copy.pdf",
    "record": "A-A-59326_23A validation record.pdf",
    "sheet": "A-A-59326_23A 3D model.pdf",
    "parts": "A-A-59326_23A parts list.pdf",
    "inspection": "A-A-59326_23A inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/AA59326_23-2-A-freecad.png",
    "pair": "Models/views/AA59326_23-2-A-pair.png",
    "record": "Models/views/AA59326_23-2-A-record.png",
    "front": "Models/views/AA59326_23-2-A-front.png",
    "top": "Models/views/AA59326_23-2-A-top.png",
    "right": "Models/views/AA59326_23-2-A-right.png",
    "cut": "Models/views/AA59326_23-2-A-cut.png"
   },
   "shown_part": "AA59326/23-2-A",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the type XXIII coupling half, one for each of the 9 part identification numbers of 4.1 (dash numbers -1, -2, -3 of Table 1 in material codes A, B, SS): the grooved pipe end at A with the groove from B to C, its bottom at D and the 2X R .020 fillets, plain pipe for F behind the groove, and the cam-lock body as an envelope cylinder ending at E; material does not change the geometry.",
   "not_modeled": [
    "The cam-lock interface of the body (see A-A-59326): the socket that takes the male adapter, the cam ears, the cam arms (two on dash -1 and -2, four on dash -3, 3.3) and the gasket of A-A-59326-G-X; the body is an envelope.",
    "Any grooved pipe interface detail of A-A-52598 beyond the A, B, C, D, fillet and .120 MIN values of Figure 1.",
    "The working and hydrostatic test pressures of Table 1, the materials of 4.1 and the salient characteristics of A-A-59326, which do not change the shape."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 a920532a2285.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "328 of 382 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (30 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 90 of 90 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 2 - Validation, 20 May 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 does not say whether the .120 MIN wall applies under the groove: if it is held only at A, the groove depth of up to .1155 (dash -1: A 6.656 max, D 6.425 min) leaves .0045 under the groove, so the engineer must say where the minimum wall applies; the solids hold .120 under the groove."
   ]
  },
  {
   "id": "A-A-59569D",
   "slug": "a-a-59569d",
   "title": "Braid, wire (copper, tin-coated, silver-coated, or nickel coated, tubular or flat)",
   "class": "Other platforms",
   "folder": "Other platforms/A-A-59569D Braid, wire",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "12 September 2019",
   "status": "Active, 1 June 2026",
   "newest": "Revision D Notice 1 - Validation, 1 June 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "A-A-59569D package.pdf",
    "scan": "A-A-59569D legacy scan.pdf",
    "clean": "A-A-59569D clean copy.pdf",
    "record": "A-A-59569D validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 a3fa8d8f1d09.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,017 of 2,030 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "82 checks on size series and limits. 4 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 6 tables (343 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-59569D is a commercial item description for tubular and flat copper wire braid (tin-, silver- or nickel-coated) that sets the braid construction for each PIN in Table I by strand gauge, number of carriers and ends, nominal tubular inside diameter, current rating and flat width by thickness, with Table II tolerances, the 3.3.3 coverage formula, splice limits, solderability and unspliced lengths, and draws only the undimensioned 7.12 braid-definition sketch labeling picks, ends and angle, so it defines a braided material rather than a part shape.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 1 June 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "A-A-59588B",
   "slug": "a-a-59588b",
   "title": "Rubber, silicone",
   "class": "Other platforms",
   "folder": "Other platforms/A-A-59588B Rubber, silicone",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Commercial item description",
   "dated": "30 January 2012",
   "status": "Active, 5 May 2023",
   "newest": "Revision B Notice 3 - Validation, 5 May 2023",
   "superseding": "",
   "preparing_activity": "DLA Troop Support - Construction and Equipment Items of Supply Standardizat",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "A-A-59588B package.pdf",
    "scan": "A-A-59588B legacy scan.pdf",
    "clean": "A-A-59588B clean copy.pdf",
    "record": "A-A-59588B validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 e52814201ec8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,041 of 2,091 items agreed. All 14 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "95 checks on size series and limits. 12 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 8 tables (560 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "A-A-59588B is a commercial item description for silicone rubber in six classes and their grades that sets material properties by class and grade in Table I and general commercial tolerances by size range for molded, sheet, extruded and calendered forms in Tables II to VI, and leaves every part dimension to the contract or purchase order (3.4), with no drawing of any part.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 3 - Validation, 5 May 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "AN6270 Rev 10",
   "slug": "an6270-rev-10",
   "title": "Hose assembly - detachable swivel fitting, low pressure",
   "class": "Other platforms",
   "folder": "Other platforms/AN6270 Rev 10 Hose assembly - detachable swivel fitting, low p",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "19 January 2017",
   "status": "Active, 19 January 2017",
   "newest": "Revision 10 (all previous amendments incorporated), 19 January 2017",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "AN6270 Rev 10 package.pdf",
    "scan": "AN6270 Rev 10 legacy scan.pdf",
    "clean": "AN6270 Rev 10 clean copy.pdf",
    "record": "AN6270 Rev 10 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 08d80ff0c4fe.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "710 of 735 items agreed. All 12 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "64 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 4 tables (142 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "AN6270 is a specification sheet for MIL-DTL-5593 low-pressure hose assemblies that sets only the overall length L through the part number, with the Table III tolerances, and for each dash size the minimum bore D, the tubing OD and the nominal hose ID; its Figure 1 leaves the hose outside diameter and the end fittings undimensioned, the adapters and nuts being MS27404 and AN818 parts.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision 10 (all previous amendments incorporated), 19 January 2017.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "AN929 Rev 14 w/AMENDMENT 1",
   "slug": "an929-rev-14-w-amendment-1",
   "title": "Cap insert, assembly, pressure seal, flared tube fitting",
   "class": "Other platforms",
   "folder": "Other platforms/AN929 Rev 14 w_AMENDMENT 1 Cap insert, assembly",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 360,
   "dimensions": 5712,
   "dimensions_met": 5712,
   "kind": "Detail specification sheet",
   "dated": "26 September 2024",
   "status": "Active, 26 September 2024",
   "newest": "Revision 14 Amendment 1 (amendment incorporated), 26 September 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "AN929 Rev 14 w_AMENDMENT 1 package.pdf",
    "scan": "AN929 Rev 14 w_AMENDMENT 1 legacy scan.pdf",
    "clean": "AN929 Rev 14 w_AMENDMENT 1 clean copy.pdf",
    "record": "AN929 Rev 14 w_AMENDMENT 1 validation record.pdf",
    "sheet": "AN929 Rev 14 w_AMENDMENT 1 3D model.pdf",
    "parts": "AN929 Rev 14 w_AMENDMENT 1 parts list.pdf",
    "inspection": "AN929 Rev 14 w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/AN929A12F-freecad.png",
    "pair": "Models/views/AN929A12F-pair.png",
    "record": "Models/views/AN929A12F-record.png",
    "front": "Models/views/AN929A12F-front.png",
    "top": "Models/views/AN929A12F-top.png",
    "right": "Models/views/AN929A12F-right.png",
    "cut": "Models/views/AN929A12F-cut.png"
   },
   "shown_part": "AN929A12F",
   "application": "FreeCAD 1.1.4",
   "modeled": "360 cap inserts, one per AN929 PIN: dash numbers -2 to -48 with the plain or L nut, the plain or A (safety chain) cap and each of the six Table I material designators; the nut option and the material do not change the cap. Each solid is the figure 1 cap: closed C body, R fillet and shoulder, B land with .010 x 45\u00b0 chamfers, 37\u00b0 seat cone from G down to the F recess of depth E, and for A parts the No. 45 safety chain hole of figure 3.",
   "not_modeled": [
    "The AN818 nut of the assembly, its threads and lock wire holes (L), and the staking or swaging that holds the cap in the nut (figures 2 and 4); this sheet refers the nut to AN818.",
    "The 1\u00b0 angle drawn in figure 1; the solids have no taper.",
    "Figure 2's limit that the cap diameter outside the nut not exceed the nut's width across flats, which needs AN818 hex sizes.",
    "Smooth finish of the seat cone, freedom from burrs (note 3), materials and finish (table I, SAE-AS4841)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 1 scanned. SHA-256 1019a353de67.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "875 of 999 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "28 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 6 tables (436 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "360 solids in STEP AP242. 5,712 of 5,712 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision 14 Amendment 1 (amendment incorporated), 26 September 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 draws a 1\u00b0 angle against the extension of the B land edge without saying which surface it tapers or at which end the tabulated diameter applies, so the solids carry no taper.",
    "Model. Figure 3 centers the AN929A2 and AN929A3 safety chain hole between the end of the AN818 nut and the end of the cap, but this sheet gives no nut length to fix that position."
   ]
  },
  {
   "id": "FF-N-836F AMENDMENT 2",
   "slug": "ff-n-836f-amendment-2",
   "title": "Nut: square, hexagon, cap, slotted, castle, knurled, welding and single ball seat",
   "class": "Other platforms",
   "folder": "Other platforms/FF-N-836F AMENDMENT 2 Nut-square, hexagon",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 21,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Federal specification",
   "dated": "27 July 2026",
   "status": "Active, 27 July 2026",
   "newest": "Revision F Amendment 2 (all previous amendments incorporated), 27 July 2026",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "FF-N-836F AMENDMENT 2 package.pdf",
    "scan": "FF-N-836F AMENDMENT 2 legacy scan.pdf",
    "clean": "FF-N-836F AMENDMENT 2 clean copy.pdf",
    "record": "FF-N-836F AMENDMENT 2 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "21 pages, 2 scanned. SHA-256 071b209a9132.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,003 of 5,023 items agreed. All 20 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "691 checks on size series and limits. 23 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "15 pages of searchable text, 7 tables (1,053 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "FF-N-836 is a general specification for square, hexagon, cap, slotted, castle, knurled, welding and single ball seat nuts that defines material, hardness, proof load, finish and slot alignment requirements and sends all dimensions to ASME B18.2.2 and the applicable MS standards, with Figure 1 giving only undimensioned outline views of each type and style.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 2 (all previous amendments incorporated), 27 July 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table III, column 'Proof loads pounds min 1/ 2/ / Grade D / Heavy and thick': 259.9 then 190.6. Page 16 prints 259.900 and 190.600 (periods for commas in this column); 259.900 is out of series: .969 sq in x 165,000 psi gives 159,900, so the printed leading 2 looks wrong, a point for an engineer.",
    "Printed value to confirm. Table IV, column 'Proof loads pounds min 1/ 2/ / Grade B / Heavy and thick': 487450 then 483000. Page 17 prints 487,450 and 483,000; 487,450 is out of series: 3.690 sq in x 105,000 psi gives 387,450, so the printed leading 4 looks wrong, a point for an engineer.",
    "Printed value to confirm. Table IV, row '4.000': 1260000 then 904500. Page 17 prints 1,260,000 and 904,500; the drop comes from the 300 series column at 75,000 psi, but 1,260,000 itself looks wrong: the column matches the 400 series in every row from 1.750 up, and 12.060 sq in x 100,000 psi gives 1,206,000, which the 400 series column prints."
   ]
  },
  {
   "id": "MIL-B-81793D",
   "slug": "mil-b-81793d",
   "title": "Bearings, ball, annular, for instruments and precision rotating components",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-B-81793D Bearings, ball",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 26,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "15 March 1993",
   "status": "Active, 10 July 2019",
   "newest": "Revision D Notice 1 - Validation, 10 July 2019",
   "superseding": "",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-B-81793D package.pdf",
    "scan": "MIL-B-81793D legacy scan.pdf",
    "clean": "MIL-B-81793D clean copy.pdf",
    "record": "MIL-B-81793D validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "26 pages, all scanned. SHA-256 a8cfe2a4aa0b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,766 of 6,195 items agreed. 44 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "723 checks on size series and limits. 53 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "18 pages of searchable text, 9 tables (996 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-B-81793D is a general specification for annular ball bearings for instruments and precision rotating components that sets materials, precision level, raceway finish and roundness, lubricant fill, starting torque, inclusion limits, inspection and a part-number scheme, and sends the boundary dimensions of each bearing to Table I of its specification sheets; Table III lists bore d and outside diameter D only to set starting torque limits, with no width and no dimensioned drawing.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 10 July 2019. ASSIST also holds Revision D Amendment 1 (21 March 1994). It was issued after this revision and is not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table II, row 7 (9/64), column 41 (Number of Balls / 12 / G / D): read as 965, could be 866."
   ]
  },
  {
   "id": "MIL-DTL-21248F",
   "slug": "mil-dtl-21248f",
   "title": "Ring, retaining (tapered and reduced section type)",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-21248F Ring, retaining",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 30,
   "solids": 38,
   "dimensions": 195,
   "dimensions_met": 195,
   "kind": "Detail specification",
   "dated": "22 JUN 2023",
   "status": "Active, 22 June 2023",
   "newest": "Revision F, 22 June 2023",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-21248F package.pdf",
    "scan": "MIL-DTL-21248F legacy scan.pdf",
    "clean": "MIL-DTL-21248F clean copy.pdf",
    "record": "MIL-DTL-21248F validation record.pdf",
    "sheet": "MIL-DTL-21248F 3D model.pdf",
    "parts": "MIL-DTL-21248F parts list.pdf",
    "inspection": "MIL-DTL-21248F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 5",
   "pictures": {
    "iso": "Models/views/MIL-DTL-21248_Class_10_.394-freecad.png",
    "pair": "Models/views/MIL-DTL-21248_Class_10_.394-pair.png",
    "record": "Models/views/MIL-DTL-21248_Class_10_.394-record.png",
    "front": "Models/views/MIL-DTL-21248_Class_10_.394-front.png",
    "top": "Models/views/MIL-DTL-21248_Class_10_.394-top.png",
    "right": "Models/views/MIL-DTL-21248_Class_10_.394-right.png",
    "cut": "Models/views/MIL-DTL-21248_Class_10_.394-cut.png"
   },
   "shown_part": "MIL-DTL-21248 Class 10 .394",
   "application": "FreeCAD 1.1.4",
   "modeled": "38 flat ring solids: the Type I, Class 9 reinforced E ring of Figure 9 for each of the 11 sizes of Table IX and the Type I, Class 10 heavy duty external ring of Figure 10 for each of the 27 sizes of Table X, each with the plan-view shape its table dimensions and a placeholder thickness.",
   "not_modeled": [
    "Type I Classes 1 to 8, Type II Classes 1 to 4 and Type III Classes 1 and 2: Tables I to VIII give only supplementary dimensions (free gap, lug hole, lug and end details), and the free diameter, section and thickness of these rings are on their MS drawings (MS16624 to MS16634, MS3216, MS90707, MS90708).",
    "Ring thickness and its tolerance, including the 3.5.1 additional plus tolerance for plated and corrosion resisting steel rings: MS3215 and MS3217 give them.",
    "The Figure 12 face contour: C (the length of groove wall in contact with the ring, C max in Tables IX and X), the C/3 blanking rollover, the 10 degree maximum angle theta and the V maximum corner radius; the solids have square, sharp edges.",
    "Dish, axial kink and protrusion, radial kink, pitch and permanent set limits (3.5.4.2 to 3.5.4.6, Tables XII to XVI): the solids are the flat nominal shape.",
    "Material, hardness and protective finish (3.2 to 3.4)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "30 pages, 1 scanned. SHA-256 25b7bc9ec32e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "7,523 of 7,790 items agreed. All 28 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "3,631 checks on size series and limits. 192 breaks checked against the scan: all are as printed. A later review settled 1 printed value from the document's own conversions.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "27 pages of searchable text, 24 tables (3,898 cells), 17 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "38 solids in STEP AP242. 195 of 195 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F, 22 June 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, column 'K (Free gap) / (Inch) / Basic': 1.76 then 1.73. Page 7 prints 1.760 for 4.750 and 1.730 for 5.000; K rises everywhere else (1.710, 1.760, 1.760, 1.730, 1.940), so the printed 1.730 looks wrong for its series.",
    "Printed value to confirm. Table I, column 'K (Free gap) / (Inch) / Basic': 2.47 then 2.45. Page 7 prints 2.470 for 6.625 and page 8 prints 2.450 for 6.750; K rises everywhere else (2.430, 2.470, 2.450, 2.550), so one of the two printed values looks wrong for its series.",
    "Printed value to confirm. Table I, column 'C 1/ / (Inch) / Max': 0.11 then 0.107. Page 7 prints .110 for 4.000 and .107 for 4.125 (series .106, .106, .110, .107, .110, .113); the printed .110 at 4.000 looks wrong for its series.",
    "Printed value to confirm. Table II, column 'C 1/ / (Inch) / Max': 0.057 then 0.054. Page 10 prints .057 for 2.500 and .054 for 2.559 (series .056, .057, .054, .060); the printed .054 looks wrong for its series.",
    "Printed value to confirm. Table V, column 'J / (Inch) / Basic': 0.038 then 0.033. Page 15 prints .038 for .140 and .033 for .156 (series .026, .030, .038, .033, .040, .042); the printed .038 looks wrong for its series.",
    "Printed value to confirm. Table V, column 'L / (Inch) / Basic': 0.04 then 0.029. Page 15 prints .040 for .110 and .029 for .125 (series .015, .016, .019, .040, .029, .032); the printed .040 looks wrong for its series.",
    "Printed value to confirm. Table X, column 'J / (Inch) / Basic': 0.053 then 0.05. Page 21 prints .053 for .437 and .050 for .500 (series .039, .053, .050, .057) while B and E for .437 repeat the .394 values; the printed .053 looks wrong for its series.",
    "Model. The specification gives no ring thickness for Classes 9 and 10, so every solid carries a placeholder thickness that must be replaced with the MS3215 or MS3217 value before the models are used for fit or strength.",
    "Model. Table X gives no free gap between the Class 10 lug ends, no lug length and no hole position, and Figure 10 draws the lugs almost touching, so the 0.03 D gap, the lug length and the centered holes must be set from MS3217."
   ]
  },
  {
   "id": "MIL-DTL-2212K(SH)",
   "slug": "mil-dtl-2212k-sh",
   "title": "Contactors and controllers, electric motor AC or DC, and associated switching devices",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-2212K(SH) Contactors and controllers, electric motor ac or",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 54,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "14 January 2014",
   "status": "Active, 25 February 2026",
   "newest": "Revision K Notice 2 - Validation, 25 February 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-2212K(SH) package.pdf",
    "scan": "MIL-DTL-2212K(SH) legacy scan.pdf",
    "clean": "MIL-DTL-2212K(SH) clean copy.pdf",
    "record": "MIL-DTL-2212K(SH) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "54 pages, 3 scanned. SHA-256 e9507cae03da.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "20,211 of 20,285 items agreed. 25 differences went to a third reader. 2 readings remain open.",
     "result": "2 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "241 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "53 pages of searchable text, 22 tables (789 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-2212K(SH) is a detail specification for AC and DC motor controllers, contactors and associated pressure, temperature, limit and selector switches that sets construction, ratings, endurance, temperature rise and test requirements, gives only basic enclosure height, width and depth limits by controller size in Table VII and maximum switch box and sensor housing sizes with mounting hole spacing in 3.16.6.1.1.7 and 3.16.6.2.1.9, and has no dimensioned drawing of any part; Figure 1 is an overload relay time-current curve and Figure A-1 is a format example whose text the caption calls inconsequential.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K Notice 2 - Validation, 25 February 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Figure A-1, callouts: read as NOTE NO.1; WARNING; REVISIONS; LIST OF REPAIR PARTS; HEATER COILS; ENCLOSURE OUTLINE; UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE IN INCHES.; REVISION STATUS OF SHEETS; DESCRIPTIVE DATA, could be HEATER TABLE in place of HEATER COILS.",
    "Open reading. Figure A-1, callouts: read as DESCRIPTION OF OPERATION; FRONT VIEW OF PANEL; WIRE NUMBERS; CONTROLLER WIRE TABLE; MAIN WIRING; CONTROL WIRING; OL JUMPER; REVISIONS; SCHEMATIC DIAGRAM; (L) - LOCAL; DOOR DIAGRAM; SEE SHEET 1, could be (L) = LOCAL."
   ]
  },
  {
   "id": "MIL-DTL-24308K w/Amendment 1",
   "slug": "mil-dtl-24308k-w-amendment-1",
   "title": "Connectors, electric, rectangular, nonenvironmental, miniature, polarized shell, rack and panel, general specification for",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-24308K w_Amendment 1 Connectors, electric",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 40,
   "solids": 6,
   "dimensions": 38,
   "dimensions_met": 38,
   "kind": "Detail specification",
   "dated": "5 December 2022",
   "status": "Active, 5 December 2022",
   "newest": "Revision K Amendment 1 (amendment incorporated), 5 December 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-24308K w_Amendment 1 package.pdf",
    "scan": "MIL-DTL-24308K w_Amendment 1 legacy scan.pdf",
    "clean": "MIL-DTL-24308K w_Amendment 1 clean copy.pdf",
    "record": "MIL-DTL-24308K w_Amendment 1 validation record.pdf",
    "sheet": "MIL-DTL-24308K w_Amendment 1 3D model.pdf",
    "parts": "MIL-DTL-24308K w_Amendment 1 parts list.pdf",
    "inspection": "MIL-DTL-24308K w_Amendment 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure A-3, page 32",
   "pictures": {
    "iso": "Models/views/MIL-DTL-24308_B-3-freecad.png",
    "pair": "Models/views/MIL-DTL-24308_B-3-pair.png",
    "record": "Models/views/MIL-DTL-24308_B-3-record.png",
    "front": "Models/views/MIL-DTL-24308_B-3-front.png",
    "top": "Models/views/MIL-DTL-24308_B-3-top.png",
    "right": "Models/views/MIL-DTL-24308_B-3-right.png",
    "cut": "Models/views/MIL-DTL-24308_B-3-cut.png"
   },
   "shown_part": "MIL-DTL-24308 B-3",
   "application": "FreeCAD 1.1.4",
   "modeled": "Six solids, one per contact of figures B-1 to B-6 (table B-I, superseded MS18281-1 to -6): the size 20 solder cup socket and pin of classes G and N with their collar, the class H size 20 eyelet pin and solder cup pin, and the size 22D solder cup socket and pin, each with the pin diameter, solder cup bore, outside diameter, depth and side cutaway, collar diameter and eyelet hole, width and thickness the figures give.",
   "not_modeled": [
    "The optional lock ring of B.4.1f, which no figure dimensions.",
    "Socket spring members (the integral or separate pressure members of figure 1), the socket entry shape, and the gold zones and areas of figure 1, which are plating areas rather than shape.",
    "Figures A-1 to A-6 and table A-I: the true-position contact hole patterns of the inserts for shell sizes 1 to 6; the insert and shell outlines are dimensioned on the MIL-DTL-24308 specification sheets, not here.",
    "Crimp contacts (M39029/57, /58, /63, /64) and insulation displacement contacts, which this specification takes from other documents, and the connector shells, mounting hardware and the figure 2 mated spacing.",
    "Test pins and fixtures: the table IX oversize pin, the figure 4 pin strength fixture and the 4.5.21 probe damage depths; table IX gives an oversize pin only for size 20, so the size 22D socket entry has no exclusion check."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "40 pages, 1 scanned. SHA-256 c11db5ba0afd.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "12,166 of 12,297 items agreed. All 126 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "582 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "41 pages of searchable text, 28 tables (1,431 cells), 19 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "6 solids in STEP AP242. 38 of 38 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K Amendment 1 (amendment incorporated), 5 December 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figures B-1 to B-6 give no length for any contact (pin projection, collar thickness, cup barrel, socket barrel, entry bore depth, eyelet tab) and no socket barrel or entry bore diameter, so these are assumed and must come from the contact drawings (superseded MS18281-1 to -6) before the solids are used for manufacture.",
    "Model. The captions of figures B-1 and B-2 name connector classes G, M, N and D, while table B-I lists only classes G and N for the same two figures, so the classes these contacts serve need to be settled."
   ]
  },
  {
   "id": "MIL-DTL-24509B(SH) w/AMENDMENT 1",
   "slug": "mil-dtl-24509b-sh-w-amendment-1",
   "title": "Valves, flanged, ball and plug for sewage and seawater service",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-24509B(SH) w_AMENDMENT 1 Valves, flanged",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 17,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "1 May 2018",
   "status": "Active, 13 February 2023",
   "newest": "Revision B Notice 1 - Validation, 13 February 2023",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-24509B(SH) w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-24509B(SH) w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-24509B(SH) w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-24509B(SH) w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "17 pages, 1 scanned. SHA-256 b25cb1f1b753.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,516 of 5,576 items agreed. All 29 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "88 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "17 pages of searchable text, 7 tables (283 cells), 9 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-24509B is a detail specification for flanged ball and plug valves for sewage and seawater service that sets materials, construction, operating torque, tests and a part-number scheme, gives only face-to-face and center-to-face lengths by valve size in Table I and nominal lever lengths and handwheel diameters in Table II, sends the end flange dimensions to MIL-PRF-20042 class 150, and draws only undimensioned flow-plan views (Figures 1 to 9) that mark ports 1, 2 and 3, so no drawing fixes the shape of the valve body.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 13 February 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-25579H w/AMENDMENT 5",
   "slug": "mil-dtl-25579h-w-amendment-5",
   "title": "Hose assembly, polytetrafluoroethylene, high temperature, medium pressure, general specification for",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-25579H w_AMENDMENT 5 Hose assembly, polytetrafluoroethylene",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 22,
   "solids": 10,
   "dimensions": 40,
   "dimensions_met": 40,
   "kind": "Detail specification",
   "dated": "9 June 2026",
   "status": "Active, 9 June 2026",
   "newest": "Revision H Amendment 5 (all previous amendments incorporated), 9 June 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-25579H w_AMENDMENT 5 package.pdf",
    "scan": "MIL-DTL-25579H w_AMENDMENT 5 legacy scan.pdf",
    "clean": "MIL-DTL-25579H w_AMENDMENT 5 clean copy.pdf",
    "record": "MIL-DTL-25579H w_AMENDMENT 5 validation record.pdf",
    "sheet": "MIL-DTL-25579H w_AMENDMENT 5 3D model.pdf",
    "parts": "MIL-DTL-25579H w_AMENDMENT 5 parts list.pdf",
    "inspection": "MIL-DTL-25579H w_AMENDMENT 5 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 9",
   "pictures": {
    "iso": "Models/views/MIL-DTL-25579_-10-freecad.png",
    "pair": "Models/views/MIL-DTL-25579_-10-pair.png",
    "record": "Models/views/MIL-DTL-25579_-10-record.png",
    "front": "Models/views/MIL-DTL-25579_-10-front.png",
    "top": "Models/views/MIL-DTL-25579_-10-top.png",
    "right": "Models/views/MIL-DTL-25579_-10-right.png",
    "cut": "Models/views/MIL-DTL-25579_-10-cut.png"
   },
   "shown_part": "MIL-DTL-25579 -10",
   "application": "FreeCAD 1.1.4",
   "modeled": "One straight one-foot piece of hose for each of the 10 dash sizes of Table IV, -3/-4 to -24Z: a round tube at the Table IV maximum hose OD around the Table X nominal inside diameter.",
   "not_modeled": [
    "The end fittings of Figure 1, the nipple, socket, coupling nut and elbow, whose envelope this document leaves to the MS8000 to MS8009 specification sheets and MIL-DTL-27272 (3.5, 3.5.2); with them the minimum nipple bore A of Table IV and the .063 maximum clearance between the back of the nut and the socket, which the solids carry as parameters only.",
    "Assembly length, set by the order with the 3.5.5.1 tolerances, and the Table V sample lengths for the qualification tests; each solid is a one-foot piece of hose.",
    "Construction of the hose wall: the PTFE inner tube and the CRES wire braid, a single layer below -16Z and two layers on -16Z, -20Z and -24Z (3.5.1, 3.5.1.1), and protective sleeves and lock-wire holes (Table II).",
    "The minimum inside bend radius of Table V, the reference tube OD of Table IV that sizes the mating tube, and the maximum hose and fitting weights of Table IV, which need material densities the document does not give."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "22 pages, 0 scanned. SHA-256 687e19fa77bc.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "9,101 of 9,119 items agreed. All 3 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "66 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "24 pages of searchable text, 10 tables (806 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "10 solids in STEP AP242. 40 of 40 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 5 (all previous amendments incorporated), 9 June 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-25988/1B",
   "slug": "mil-dtl-25988-1b",
   "title": "Rubber, fluorosilicone elastomer, oil- and fuel-resistant, O-rings, class 1, grade 70",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-25988_1B Rubber, fluorosilicone elastomer",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 369,
   "dimensions": 1107,
   "dimensions_met": 1107,
   "kind": "Detail specification sheet",
   "dated": "29 June 2021",
   "status": "Active, 21 April 2026",
   "newest": "Revision B Notice 1 - Validation, 21 April 2026",
   "superseding": "",
   "preparing_activity": "Air Force Research Laboratory (AFRL)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-25988_1B package.pdf",
    "scan": "MIL-DTL-25988_1B legacy scan.pdf",
    "clean": "MIL-DTL-25988_1B clean copy.pdf",
    "record": "MIL-DTL-25988_1B validation record.pdf",
    "sheet": "MIL-DTL-25988_1B 3D model.pdf",
    "parts": "MIL-DTL-25988_1B parts list.pdf",
    "inspection": "MIL-DTL-25988_1B inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/M25988_1-258-freecad.png",
    "pair": "Models/views/M25988_1-258-pair.png",
    "record": "Models/views/M25988_1-258-record.png",
    "front": "Models/views/M25988_1-258-front.png",
    "top": "Models/views/M25988_1-258-top.png",
    "right": "Models/views/M25988_1-258-right.png",
    "cut": "Models/views/M25988_1-258-cut.png"
   },
   "shown_part": "M25988/1-258",
   "application": "FreeCAD 1.1.4",
   "modeled": "Each O-ring of Table I (dash numbers 001 to 475) and each straight thread tube fitting boss gasket of Table II (901 to 932) is a solid torus with the nominal cross-section width W and inside diameter ID.",
   "not_modeled": [
    "The parting-line limits of Figure 1, .003 (MAX) and .005 (MAX): the solids have no flash, parting line or mismatch.",
    "The Table II tube outside diameter, which names the tube the boss gasket serves; it is kept as a parameter of each boss gasket and not measured on the solid.",
    "The fluorosilicone material, Class 1, Grade 70, and its properties and tests under MIL-DTL-25988, and the packing gland design of MIL-G-5514."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 3980a34f8abe.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,793 of 2,147 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1,114 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 3 tables (1,895 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "369 solids in STEP AP242. 1,107 of 1,107 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 1 - Validation, 21 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-25988/2A",
   "slug": "mil-dtl-25988-2a",
   "title": "Rubber, fluorosilicone, elastomer, oil- and fuel-resistant, O-rings, class 3",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-25988_2A Rubber, fluorosilicone",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "29 June 2021",
   "status": "Active, 21 April 2026",
   "newest": "Revision A Notice 1 - Validation, 21 April 2026",
   "superseding": "",
   "preparing_activity": "Air Force Research Laboratory (AFRL)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-25988_2A package.pdf",
    "scan": "MIL-DTL-25988_2A legacy scan.pdf",
    "clean": "MIL-DTL-25988_2A clean copy.pdf",
    "record": "MIL-DTL-25988_2A validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, 0 scanned. SHA-256 cea84a34f252.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "208 of 209 items agreed. All 1 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 0 tables (0 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "The sheet defines only the part numbering system for Class 3 fluorosilicone o-rings (prefix M25988/2 plus a dash number) and refers to MIL-DTL-25988/1 for the o-ring drawing and dimensions, so it carries no drawing, dimension letters or size table.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 21 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-25988/3A",
   "slug": "mil-dtl-25988-3a",
   "title": "Rubber, fluorosilicone, elastomer, oil- and fuel-resistant, O-rings, grade 60",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-25988_3A Rubber, fluorosilicone",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "29 June 2021",
   "status": "Active, 21 April 2026",
   "newest": "Revision A Notice 1 - Validation, 21 April 2026",
   "superseding": "",
   "preparing_activity": "Air Force Research Laboratory (AFRL)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-25988_3A package.pdf",
    "scan": "MIL-DTL-25988_3A legacy scan.pdf",
    "clean": "MIL-DTL-25988_3A clean copy.pdf",
    "record": "MIL-DTL-25988_3A validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, 0 scanned. SHA-256 605b88f47ded.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "208 of 210 items agreed. All 3 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 0 tables (0 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-25988/3A is a detail specification sheet that sets only the part identifying number (M25988/3 plus a dash number) for Class 1, Grade 60 fluorosilicone o-rings used in MIL-G-5514 packing glands, and refers the o-ring drawing and dimensions to MIL-DTL-25988/1; it carries no drawing, figure or dimension table of its own.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 21 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-25988/4A",
   "slug": "mil-dtl-25988-4a",
   "title": "Rubber, fluorosilicone, elastomer, oil- and fuel-resistant, O-rings, class 1, grade 80",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-25988_4A Rubber, fluorosilicone",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "29 June 2021",
   "status": "Active, 21 April 2026",
   "newest": "Revision A Notice 1 - Validation, 21 April 2026",
   "superseding": "",
   "preparing_activity": "Air Force Research Laboratory (AFRL)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-25988_4A package.pdf",
    "scan": "MIL-DTL-25988_4A legacy scan.pdf",
    "clean": "MIL-DTL-25988_4A clean copy.pdf",
    "record": "MIL-DTL-25988_4A validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, 0 scanned. SHA-256 561570952061.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "211 of 211 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "2 pages of searchable text, 0 tables (0 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-25988/4A is a part-numbering sheet for Class 1, Grade 80 fluorosilicone O-rings that sets only the PIN, M25988/4 followed by a dash number from Table I, O-ring sizes, and sends the O-ring drawing and all dimensions to MIL-DTL-25988/1; it carries no drawing or dimension table of its own.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision A Notice 1 - Validation, 21 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-27426E",
   "slug": "mil-dtl-27426e",
   "title": "Rings, retaining, spiral (uniform cross section)",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-27426E Rings, retaining",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 13,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "8 August 2022",
   "status": "Active, 8 August 2022",
   "newest": "Revision E, 8 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-27426E package.pdf",
    "scan": "MIL-DTL-27426E legacy scan.pdf",
    "clean": "MIL-DTL-27426E clean copy.pdf",
    "record": "MIL-DTL-27426E validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "13 pages, 1 scanned. SHA-256 65fa51b83e04.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,378 of 3,426 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "356 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 8 tables (358 cells), 9 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-27426 is the general specification for spiral retaining rings: it sends each type to its own sheet (MIL-DTL-27426/1 to /4) for dimensions by dash number and gives only burr, crimp, dish and misalignment limits by thickness, radial wall or diameter range, so it fixes no ring shape by dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E, 8 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-3432J w/ AMENDMENT 2",
   "slug": "mil-dtl-3432j-w-amendment-2",
   "title": "Cables, (power and special purpose) and wire, electrical (300 and 600 volts)",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-3432J w_ AMENDMENT 2 Cables",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 41,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "8 September 2022",
   "status": "Active, 8 September 2022",
   "newest": "Revision J Amendment 2 (all previous amendments incorporated), 8 September 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-3432J w_ AMENDMENT 2 package.pdf",
    "scan": "MIL-DTL-3432J w_ AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-DTL-3432J w_ AMENDMENT 2 clean copy.pdf",
    "record": "MIL-DTL-3432J w_ AMENDMENT 2 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "41 pages, 0 scanned. SHA-256 913359bb923c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "10,446 of 10,545 items agreed. All 38 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "343 checks on size series and limits. 19 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "31 pages of searchable text, 39 tables (1,893 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-3432 is a detail specification for 300 and 600 volt power and special purpose cables that sets construction rules rather than parts: an open-ended type designation built from conductor count, duty, application, flexibility, conductor sizes, shielding and outside diameter in mils (1.2.1, 1.2.1.8), conductor and ground-wire stranding by AWG (Tables IV and V), insulation thickness by conductor size (Table VI), jacket thickness by calculated core diameter (Table IX), diameter tolerances (3.2.8) and compound and test requirements, with no drawing and no fixed list of cables whose cross-section layout it dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J Amendment 2 (all previous amendments incorporated), 8 September 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-38999/33E w/AMENDMENT 3",
   "slug": "mil-dtl-38999-33e-w-amendment-3",
   "title": "Connector, electrical circular, cover, protective, receptacle, series III, metric",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-38999_33E w_AMENDMENT 3 Connector, electrical circular",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 27,
   "dimensions": 306,
   "dimensions_met": 306,
   "kind": "Detail specification sheet",
   "dated": "11 August 2022",
   "status": "Active, 11 August 2022",
   "newest": "Revision E Amendment 3 (all previous amendments incorporated), 11 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-38999_33E w_AMENDMENT 3 package.pdf",
    "scan": "MIL-DTL-38999_33E w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MIL-DTL-38999_33E w_AMENDMENT 3 clean copy.pdf",
    "record": "MIL-DTL-38999_33E w_AMENDMENT 3 validation record.pdf",
    "sheet": "MIL-DTL-38999_33E w_AMENDMENT 3 3D model.pdf",
    "parts": "MIL-DTL-38999_33E w_AMENDMENT 3 parts list.pdf",
    "inspection": "MIL-DTL-38999_33E w_AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/D38999_33_shell_size_17_style_N-freecad.png",
    "pair": "Models/views/D38999_33_shell_size_17_style_N-pair.png",
    "record": "Models/views/D38999_33_shell_size_17_style_N-record.png",
    "front": "Models/views/D38999_33_shell_size_17_style_N-front.png",
    "top": "Models/views/D38999_33_shell_size_17_style_N-top.png",
    "right": "Models/views/D38999_33_shell_size_17_style_N-right.png",
    "cut": "Models/views/D38999_33_shell_size_17_style_N-cut.png"
   },
   "shown_part": "D38999/33 shell size 17 style N",
   "application": "FreeCAD 1.1.4",
   "modeled": "27 solids, one per shell size 9 to 25 in each style, each standing for every class: the cover with its coupling-thread bore, fused gasket and fastener boss (style C); with the fastener, rope and end terminal (style R); or with the fastener, rope and the angled ring on its own fastener (style N).",
   "not_modeled": [
    "The thread form of the A coupling thread (0.1 pitch, 0.3 lead, triple start, class 2B).",
    "The gasket as a separate body: it is fused into the cover, so its back face and its 1.57 \u00b1 0.25 thickness are not surfaces of the solid.",
    "The flutes or knurl, the marking and the rounded corners of the cover.",
    "The rope's insulation, its free shape and the running clearance that lets it rotate freely on the fastener.",
    "Material, finish, the fastener tensile load, air leakage and the qualification tests, which are not geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 1 scanned. SHA-256 628c82f7c17c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "646 of 668 items agreed. All 16 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "8 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (77 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "27 solids in STEP AP242. 306 of 306 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 3 (all previous amendments incorporated), 11 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The PIN example on page 5 prints the specification sheet number as D38999/32 on this /33 sheet; the solids are named D38999/33 and an engineer must confirm the prefix.",
    "Model. Figure 1 draws E on the flat front view of the ring but bends the ring 30\u00b0 \u00b1 10\u00b0, and the sheet gives neither the position of the bend on the tab nor whether E is measured before or after bending, which decide where the ring sits."
   ]
  },
  {
   "id": "MIL-DTL-3950L",
   "slug": "mil-dtl-3950l",
   "title": "Switches, toggle, environmentally sealed general specification for",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-3950L Switches, toggle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 38,
   "solids": 10,
   "dimensions": 51,
   "dimensions_met": 51,
   "kind": "Detail specification",
   "dated": "21 December 2022",
   "status": "Active, 21 December 2022",
   "newest": "Revision L Supplement 1, 21 December 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-3950L package.pdf",
    "scan": "MIL-DTL-3950L legacy scan.pdf",
    "clean": "MIL-DTL-3950L clean copy.pdf",
    "record": "MIL-DTL-3950L validation record.pdf",
    "sheet": "MIL-DTL-3950L 3D model.pdf",
    "parts": "MIL-DTL-3950L parts list.pdf",
    "inspection": "MIL-DTL-3950L inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 30",
   "pictures": {
    "iso": "Models/views/MIL-DTL-3950_A.4.2_screw_with_lockwasher_.164-32-freecad.png",
    "pair": "Models/views/MIL-DTL-3950_A.4.2_screw_with_lockwasher_.164-32-pair.png",
    "record": "Models/views/MIL-DTL-3950_A.4.2_screw_with_lockwasher_.164-32-record.png",
    "front": "Models/views/MIL-DTL-3950_A.4.2_screw_with_lockwasher_.164-32-front.png",
    "top": "Models/views/MIL-DTL-3950_A.4.2_screw_with_lockwasher_.164-32-top.png",
    "right": "Models/views/MIL-DTL-3950_A.4.2_screw_with_lockwasher_.164-32-right.png",
    "cut": "Models/views/MIL-DTL-3950_A.4.2_screw_with_lockwasher_.164-32-cut.png"
   },
   "shown_part": "MIL-DTL-3950 A.4.2 screw with lockwasher .164-32",
   "application": "FreeCAD 1.1.4",
   "modeled": "Ten solids of the Appendix A mounting and terminal hardware: the .469-32 thin hexagon nut, internal tooth lock washer and key washer, the pan head terminal screw and the screw with captive internal tooth lockwasher in .138-32 and .164-32, the helical spring lock washer in the .138 and .164 sizes, and the .138-32 terminal screw with captive split ring lockwasher and flat washer.",
   "not_modeled": [
    "The toggle switches themselves: the specification dimensions only their mounting and terminal hardware.",
    "Thread form of the .469-32 NS-2B nut and the .138-32 and .164-32 UNC-2A screws.",
    "Screw slots and cross recesses, the optional head contours and the chamfered screw points, which the drawings show without dimensions.",
    "Teeth of the internal tooth lock washers and the split and helix of the helical lock washers; none is dimensioned.",
    "Bores of the captive washers, the reduced shank they ride on, the free rotation of note 1 and the note 2 limit that the screw is threaded to within .024 of the lockwasher.",
    "Bend radius of the key washer tab.",
    "Materials, finishes and the MIL hardware substitutes listed for each item."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "38 pages, 0 scanned. SHA-256 fe1e9c3cccf2.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "11,281 of 11,447 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "189 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "26 pages of searchable text, 19 tables (1,152 cells), 14 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "10 solids in STEP AP242. 51 of 51 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision L Supplement 1, 21 December 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-5041L (USAF)",
   "slug": "mil-dtl-5041l-usaf",
   "title": "Tires, ribbed tread, pneumatic, aircraft",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-5041L (USAF) Tires, ribbed tread",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 37,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "23 September 2019",
   "status": "Active, 23 September 2019",
   "newest": "Revision L, 23 September 2019",
   "superseding": "",
   "preparing_activity": "Air Force Sustainment Center - Ogden",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-5041L (USAF) package.pdf",
    "scan": "MIL-DTL-5041L (USAF) legacy scan.pdf",
    "clean": "MIL-DTL-5041L (USAF) clean copy.pdf",
    "record": "MIL-DTL-5041L (USAF) validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "37 pages, 2 scanned. SHA-256 5cb8c6f7c930.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "7,804 of 8,066 items agreed. All 61 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "192 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "31 pages of searchable text, 20 tables (1,393 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-5041 is the detail specification for ribbed tread pneumatic aircraft tires that sets construction, materials, marking, qualification tests and bead seating pressures and lists tire size, ply rating and a drawing or MS number for each tire in Table I, but leaves all tire dimensions to the specification sheets and the TRA Aircraft Yearbook, with Figures 1 and 2 giving only undimensioned marking locations.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision L, 23 September 2019.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-6645K",
   "slug": "mil-dtl-6645k",
   "title": "Parachutes, personnel, general specification for",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-6645K Parachutes, personnel",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 14,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "27 JANUARY 2023",
   "status": "Active, 27 January 2023",
   "newest": "Revision K, 27 January 2023",
   "superseding": "",
   "preparing_activity": "Air Force Life Cycle Management Center - Aircraft Systems",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-6645K package.pdf",
    "scan": "MIL-DTL-6645K legacy scan.pdf",
    "clean": "MIL-DTL-6645K clean copy.pdf",
    "record": "MIL-DTL-6645K validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "14 pages, 0 scanned. SHA-256 c3897bc84073.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,687 of 4,703 items agreed. All 12 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "14 pages of searchable text, 1 table (6 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-6645K is a general detail specification for personnel parachutes that sets qualification, materials, construction practice, suspension line tensioning (20 and 10 pound loads by cord type), canopy air permeability, ripcord pull force, identification marking and inspection, and sends every part shape to the technical data package of each assembly; its two figures are a reference canopy marking diagram with approximate marking locations (1.0, 3.0 and 12.0 inches) and an undimensioned pictorial of a gliding canopy.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K, 27 January 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-76E w/AMENDMENT 1",
   "slug": "mil-dtl-76e-w-amendment-1",
   "title": "Wire and cable, hookup, electrical, insulated, general specification for",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-76E w_AMENDMENT 1 Wire and cable, hookup",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 28,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "17 March 2022",
   "status": "Active, 17 March 2022",
   "newest": "Revision E Amendment 1 (amendment incorporated), 17 March 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-76E w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-76E w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-76E w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-76E w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "28 pages, 0 scanned. SHA-256 6928fd26201c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "8,667 of 8,759 items agreed. All 37 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "572 checks on size series and limits. 34 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "22 pages of searchable text, 21 tables (1,535 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-76 is a general specification for insulated hookup wire that defines conductor stranding, insulation wall thickness and maximum diameter over insulation by AWG size and type, together with materials, performance and inspection requirements, but has no drawing that fixes a part shape.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 1 (amendment incorporated), 17 March 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table XI, column 'Type hmp / Voltage-withstand / Test voltage (volts, rms)': 235 then 275. Page 14 prints 235 at AWG 14 and 275 at AWG 12. The values for AWG 12 to 4 (275, 230, 170, 140, 115) fall with conductor size as insulation resistance does at the 45-mil wall that starts at AWG 14 (table VI), and that series puts AWG 14 near 320, above the 275 at AWG 16 where the wall is thinner. The printed 235 at AWG 14 looks wrong for its series, a point for an engineer.",
    "Printed value to confirm. Table XI, column 'Type hwr / Voltage-withstand / Test voltage (volts, rms)': 235 then 275. Page 14 prints 235 at AWG 14 and 275 at AWG 12. The values for AWG 12 to 4 (275, 230, 170, 140, 115) fall with conductor size as insulation resistance does at the 45-mil wall that starts at AWG 14 (table VI), and that series puts AWG 14 near 320, above the 275 at AWG 16 where the wall is thinner. The printed 235 at AWG 14 looks wrong for its series, a point for an engineer."
   ]
  },
  {
   "id": "MIL-DTL-7788K",
   "slug": "mil-dtl-7788k",
   "title": "Panels, information, integrally illuminated",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-7788K Panels, information",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 47,
   "solids": 1,
   "dimensions": 7,
   "dimensions_met": 7,
   "kind": "Detail specification",
   "dated": "22 September 2025",
   "status": "Active, 22 September 2025",
   "newest": "Revision K, 22 September 2025",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-7788K package.pdf",
    "scan": "MIL-DTL-7788K legacy scan.pdf",
    "clean": "MIL-DTL-7788K clean copy.pdf",
    "record": "MIL-DTL-7788K validation record.pdf",
    "sheet": "MIL-DTL-7788K 3D model.pdf",
    "parts": "MIL-DTL-7788K parts list.pdf",
    "inspection": "MIL-DTL-7788K inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 32",
   "pictures": {
    "iso": "Models/views/MIL-DTL-7788_test_panel_5.67_x_4.06-freecad.png",
    "pair": "Models/views/MIL-DTL-7788_test_panel_5.67_x_4.06-pair.png",
    "record": "Models/views/MIL-DTL-7788_test_panel_5.67_x_4.06-record.png",
    "front": "Models/views/MIL-DTL-7788_test_panel_5.67_x_4.06-front.png",
    "top": "Models/views/MIL-DTL-7788_test_panel_5.67_x_4.06-top.png",
    "right": "Models/views/MIL-DTL-7788_test_panel_5.67_x_4.06-right.png",
    "cut": "Models/views/MIL-DTL-7788_test_panel_5.67_x_4.06-cut.png"
   },
   "shown_part": "MIL-DTL-7788 test panel 5.67 x 4.06",
   "application": "FreeCAD 1.1.4",
   "modeled": "One envelope solid of the Figure 1 qualification test panel for types IV, V, VI and VII, all classes: a flat plate 5.67 by 4.06 by .240 thick at the nominal sizes.",
   "not_modeled": [
    "The two \u00d8.50 through holes, whose diameter Figure 1 gives but whose positions it does not.",
    "The rounded corners that Figure 1 draws without a radius; the solid has square corners.",
    "The marking areas of Figure 1 (the .03 by 5.00 line, the \u00d8.50 circle, the .125, .030 and .015 by .50 lines, the 0.156 high lettering of note 3 and the .08 by .08 connector cross at 2.88 and 2.03), which are white translucent areas no deeper than 0.005 inch (3.7).",
    "The MS90335 connector of 3.3.3.5, whose collar extends 0.140 \u00b1 0.010 (types IV and VI) or 0.135 \u00b1 0.010 (types V and VII) from the rear surface at the connector location and whose body MIL-DTL-32385 defines.",
    "The internal construction: lamps behind at least 0.030 of plastic, the 0.020 minimum resin film over the rear circuitry (3.3.3.1) and the type V and VII circuit board recessed to 0.010 over flush (3.3.2).",
    "Production panels, whose shape and size the specification does not set (6.3.1)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "47 pages, 4 scanned. SHA-256 9a70ac038a1b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "15,011 of 15,039 items agreed. All 13 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "30 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "37 pages of searchable text, 9 tables (672 cells), 7 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "1 solid in STEP AP242. 7 of 7 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K, 22 September 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 gives no position for the two \u00d8.50 through holes or for the marking areas, so a panel with its holes cannot be built from the document alone.",
    "Model. Figure 1 draws rounded corners on the panel but gives no corner radius."
   ]
  },
  {
   "id": "MIL-DTL-81706B w/AMENDMENT 1",
   "slug": "mil-dtl-81706b-w-amendment-1",
   "title": "Chemical conversion materials for coating aluminum and aluminum alloys",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-81706B w_AMENDMENT 1 Chemical conversion materials for coating alumin",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 20,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "2 May 2006",
   "status": "Active, 7 February 2024",
   "newest": "Revision B Notice 2 - Validation, 7 February 2024",
   "superseding": "",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-81706B w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-81706B w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-81706B w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-81706B w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "20 pages, 3 scanned. SHA-256 af732bca6c42.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,747 of 5,764 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "22 checks on size series and limits. 3 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "15 pages of searchable text, 3 tables (156 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-81706 is a detail specification for chemical conversion coating materials for aluminum and aluminum alloys, defining their types, classes, forms, application methods, and corrosion, adhesion, coating weight and electrical resistance tests rather than the dimensions of any part.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision B Notice 2 - Validation, 7 February 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-83413/8F w/AMENDMENT 1",
   "slug": "mil-dtl-83413-8f-w-amendment-1",
   "title": "Connectors and assemblies, electrical, aircraft grounding: type IV jumper cable assembly, lead, electrical",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-83413_8F w_AMENDMENT 1 Connectors and assemblies, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 19,
   "solids": 5,
   "dimensions": 70,
   "dimensions_met": 70,
   "kind": "Detail specification sheet",
   "dated": "8 June 2026",
   "status": "Active, 8 June 2026",
   "newest": "Revision F Amendment 1 (amendment incorporated), 8 June 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-83413_8F w_AMENDMENT 1 package.pdf",
    "scan": "MIL-DTL-83413_8F w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-DTL-83413_8F w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-DTL-83413_8F w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-DTL-83413_8F w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-DTL-83413_8F w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-DTL-83413_8F w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M83413_8-C012QQ-freecad.png",
    "pair": "Models/views/M83413_8-C012QQ-pair.png",
    "record": "Models/views/M83413_8-C012QQ-record.png",
    "front": "Models/views/M83413_8-C012QQ-front.png",
    "top": "Models/views/M83413_8-C012QQ-top.png",
    "right": "Models/views/M83413_8-C012QQ-right.png",
    "cut": "Models/views/M83413_8-C012QQ-cut.png"
   },
   "shown_part": "M83413/8-C012QQ",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid per Table V lug code (O, P, Q, R, S) for the type C aluminum jumper with the same lug at both ends at the 12 inch Group C specimen length: two flat ring-tongue terminals with round barrels, the straight cable between them and the clear identification band, as one body.",
   "not_modeled": [
    "Type C alone defines 24,925 part numbers (997 lengths, 003 to 999, times 5 x 5 lug pairs); one representative length is modeled with matching lugs, and other lengths and mixed-lug pairs differ only in L and in which Table V terminal sits at each end.",
    "Types A, B and D to L: their terminals are MS25036, MS20659 and M7928/1 parts dimensioned in those documents, not in this sheet, and the D, E and F coupler is an M6852-3 part per MIL-DTL-6852.",
    "Figure 1 dimensions for types D, E and F only: the 1.500 MAX REF coupler, the 1.312 +.125 -.000 short end and the P +.125 -.000 long end.",
    "The rope or concentric lay of the strands, the dip brazed joint, the chemical conversion coating, the PIN marking on the band and the materials; tensile, resistance and flex requirements are not shape."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "19 pages, 0 scanned. SHA-256 e1a1658bf2e3.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,590 of 2,623 items agreed. All 33 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "103 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 14 tables (787 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "5 solids in STEP AP242. 70 of 70 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 1 (amendment incorporated), 8 June 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-83723/86E w/AMENDMENT 3",
   "slug": "mil-dtl-83723-86e-w-amendment-3",
   "title": "Connectors, electrical, circular, environment resisting, plug, threaded coupling, crimp socket contact, series III, classes A, G, K, M, R, T, W and Z",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-83723_86E w_AMENDMENT 3 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 9,
   "dimensions": 252,
   "dimensions_met": 252,
   "kind": "Detail specification sheet",
   "dated": "12 March 2024",
   "status": "Active, 12 March 2024",
   "newest": "Revision E Amendment 3 (all previous amendments incorporated), 12 March 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-83723_86E w_AMENDMENT 3 package.pdf",
    "scan": "MIL-DTL-83723_86E w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MIL-DTL-83723_86E w_AMENDMENT 3 clean copy.pdf",
    "record": "MIL-DTL-83723_86E w_AMENDMENT 3 validation record.pdf",
    "sheet": "MIL-DTL-83723_86E w_AMENDMENT 3 3D model.pdf",
    "parts": "MIL-DTL-83723_86E w_AMENDMENT 3 parts list.pdf",
    "inspection": "MIL-DTL-83723_86E w_AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M83723_86_shell_size_16-freecad.png",
    "pair": "Models/views/M83723_86_shell_size_16-pair.png",
    "record": "Models/views/M83723_86_shell_size_16-record.png",
    "front": "Models/views/M83723_86_shell_size_16-front.png",
    "top": "Models/views/M83723_86_shell_size_16-top.png",
    "right": "Models/views/M83723_86_shell_size_16-right.png",
    "cut": "Models/views/M83723_86_shell_size_16-cut.png"
   },
   "shown_part": "M83723/86 shell size 16",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the MIL-DTL-83723/86 plug for the nine shell sizes 08 to 24 of Figure 1, one body each: the shell with its 30\u00b0 front chamfer of length L, diameter J and bore H, the insert at diameter B, and the coupling ring with the K front bore, the A coupling thread as a plain bore from the thread start to the .510 shoulder, diameter W over the knurl band and rear flange, and three .035 safety wire holes, positioned at the coupling ring's fully forward position.",
   "not_modeled": [
    "Class, insert arrangement and polarizing position do not change the envelope, so one solid stands for every PIN of a shell size (M83723/86 class, shell size, insert arrangement, polarizing position).",
    "Insert arrangements and contact cavities (MIL-STD-1554), with the Detail R cavity entry diameters (.054, .076, .107), lead-in chamfer diameters (.096/.092, .118/.114, .150/.146, .210/.206), the .051/.035 and .377/.363 depths, the .309/.263 front of contact and the Table I reduced chamfers for arrangements 08-03 and 10-06; the insert front face is plain.",
    "The polarizing keys on the shell, including the master key on the vertical centerline, the .125 minimum key length, the .330 key location, the .007 maximum radius and the note 7 projection.",
    "The .400 to .500 axial dimension from the shell front face to a line inside the coupling ring between the shell and the thread.",
    "The rear accessory end behind the 1.18 shoulder, whose interchangeability dimensions are in MIL-DTL-83723 (note 5).",
    "The thread form of the A coupling thread, the knurl, marking and the separate parts inside the plug (shell, coupling ring, insert and seals are one body behind the .510 shoulder)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 2 scanned. SHA-256 fd40cfbc4eed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "410 of 444 items agreed. All 34 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "8 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (78 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 252 of 252 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 3 (all previous amendments incorporated), 12 March 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 does not locate the insert front face from the shell front face; the solids place it .170 back in proportion to the drawing, so an engineer must take the mating face position from MIL-DTL-83723 before the solids are used for mating or contact engagement checks."
   ]
  },
  {
   "id": "MIL-DTL-83731F",
   "slug": "mil-dtl-83731f",
   "title": "Switches, toggle, unsealed and sealed general specification for",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-83731F Switches, toggle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 32,
   "solids": 13,
   "dimensions": 67,
   "dimensions_met": 67,
   "kind": "Detail specification",
   "dated": "3 August 2022",
   "status": "Active, 3 August 2022",
   "newest": "Revision F Supplement 1, 3 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-83731F package.pdf",
    "scan": "MIL-DTL-83731F legacy scan.pdf",
    "clean": "MIL-DTL-83731F clean copy.pdf",
    "record": "MIL-DTL-83731F validation record.pdf",
    "sheet": "MIL-DTL-83731F 3D model.pdf",
    "parts": "MIL-DTL-83731F parts list.pdf",
    "inspection": "MIL-DTL-83731F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 25",
   "pictures": {
    "iso": "Models/views/MIL-DTL-83731_A.3.4_key_D_washer-freecad.png",
    "pair": "Models/views/MIL-DTL-83731_A.3.4_key_D_washer-pair.png",
    "record": "Models/views/MIL-DTL-83731_A.3.4_key_D_washer-record.png",
    "front": "Models/views/MIL-DTL-83731_A.3.4_key_D_washer-front.png",
    "top": "Models/views/MIL-DTL-83731_A.3.4_key_D_washer-top.png",
    "right": "Models/views/MIL-DTL-83731_A.3.4_key_D_washer-right.png",
    "cut": "Models/views/MIL-DTL-83731_A.3.4_key_D_washer-cut.png"
   },
   "shown_part": "MIL-DTL-83731 A.3.4 key D washer",
   "application": "FreeCAD 1.1.4",
   "modeled": "Thirteen solids of the Appendix A mounting and terminal hardware: the thin hexagon nut (.250-40 and .469-32), internal tooth lock washer and key washer (.250 and .468 sizes), the key D washer, the pan head terminal screw and the screw with captive internal tooth lockwasher (.138-32 and .164-32), and the helical spring lock washer (.138 and .164).",
   "not_modeled": [
    "The toggle switches themselves: the specification dimensions only their mounting and terminal hardware.",
    "Thread form of the .250-40 UNS-2B and .469-32 NS-2B nuts and the .138-32 and .164-32 UNC-2A screws.",
    "Screw slots, the rounded pan head edge, the optional head contour of A.4.2 and the chamfered screw points, which the drawings show without dimensions.",
    "Teeth of the internal tooth lock washers and the split and helix of the helical spring lock washers; none is dimensioned.",
    "Bore of the A.4.2 captive lockwasher, the shank it rides on, its free rotation (note 1) and the note 2 limit that the screw is threaded to within .024 of the lockwasher.",
    "Bend radius of the key washer tabs and the corner radii of the inner key and bore flat.",
    "Materials, finishes and the MIL hardware substitutes listed for each item."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "32 pages, 1 scanned. SHA-256 04af90f56be8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "11,334 of 11,513 items agreed. All 36 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "218 checks on size series and limits. 6 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "29 pages of searchable text, 20 tables (1,292 cells), 14 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "13 solids in STEP AP242. 67 of 67 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Supplement 1, 3 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. The table on page 28, row '.138': 0.253 then 0.031. Page 28 prints B Max .253 then B Min .031 for size .138. The printed header puts the .031 column under B, but .031 cannot be a minimum outside diameter beside a .253 maximum; it reads as the section thickness under C, so the header is a point for an engineer.",
    "Printed value to confirm. The table on page 28, row '.164': 0.296 then 0.04. Page 28 prints B Max .296 then B Min .040 for size .164. The printed header puts the .040 column under B, but .040 cannot be a minimum outside diameter beside a .296 maximum; it reads as the section thickness under C, so the header is a point for an engineer.",
    "Model. The A.4.3 table prints .031 and .040 under B Min, but no outside diameter minimum can be below the inside diameter minimums of .141 and .168; the solids read them as the section thickness C minimums beside the .037 and .046 C maximums, and the engineer should confirm the column heads.",
    "Model. A.3.2 names NASM35333-125 as the steel substitute for both the .250 and the .468 washer, while the cres line gives -135 and -136 for the two sizes; the steel dash number for one size needs to be confirmed."
   ]
  },
  {
   "id": "MIL-DTL-85052/1C",
   "slug": "mil-dtl-85052-1c",
   "title": "Clamp, loop, TUBE-17-7 PH CRES, 275 \u00b0F, fuel and petroleum based hydraulic fluid resistant",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-85052_1C Clamp, loop",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 23,
   "dimensions": 707,
   "dimensions_met": 707,
   "kind": "Detail specification sheet",
   "dated": "30 March 2005",
   "status": "Active, 10 September 2019",
   "newest": "Revision C Notice 3 - Validation, 10 September 2019",
   "superseding": "",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-85052_1C package.pdf",
    "scan": "MIL-DTL-85052_1C legacy scan.pdf",
    "clean": "MIL-DTL-85052_1C clean copy.pdf",
    "record": "MIL-DTL-85052_1C validation record.pdf",
    "sheet": "MIL-DTL-85052_1C 3D model.pdf",
    "parts": "MIL-DTL-85052_1C parts list.pdf",
    "inspection": "MIL-DTL-85052_1C inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M85052_1-13-freecad.png",
    "pair": "Models/views/M85052_1-13-pair.png",
    "record": "Models/views/M85052_1-13-record.png",
    "front": "Models/views/M85052_1-13-front.png",
    "top": "Models/views/M85052_1-13-top.png",
    "right": "Models/views/M85052_1-13-right.png",
    "cut": "Models/views/M85052_1-13-cut.png"
   },
   "shown_part": "M85052/1-13",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid models of the MIL-DTL-85052/1 loop clamp for every dash number from -2 to -24, as installed on a mandrel of diameter D with the .0625 spacer between the feet: the 17-7 PH band with its loop, upper leg and bend R, joggled lower foot, two feet with the mounting hole and .375 R ends, the stiffening bead on -4 and larger, and the Section A-A cushion around the loop, fused into one solid.",
   "not_modeled": [
    "The molded wedge that note 1 requires on -6 and larger is not modeled; figure 1 gives it no dimensions.",
    "The cushion along the lower foot and down the upper leg to the wedge, which figure 1 draws but does not dimension, is not modeled; the cushion covers the loop arc only.",
    "The free-state shape as received (figure 1, dashed) is not modeled; the solids show the installed shape.",
    "The blend radii on the stiffening bead (note 2) and the S-shaped bead flanks drawn in Section B-B are not modeled; the bead is a single .09 R groove with square ends.",
    "Burr and edge removal (note 3), part number marking, materials, passivation and the Table II cushion properties are not geometry and are not modeled.",
    "Band and cushion are fused into one solid, so the band inside the cushion is not a separate body."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 1 scanned. SHA-256 e90db2c8e83e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "908 of 927 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "152 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (232 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "23 solids in STEP AP242. 707 of 707 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 3 - Validation, 10 September 2019.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The plan view gives the cushion's overall width as .62 REF, but the Section A-A channel of .515 and two walls of .060 +.020 -.000 make it at least .635 at the nominal channel width and .655 at the middle of the wall tolerance; .62 equals the .500 band width plus two .060 walls, so the intended width needs confirming.",
    "Model. Table I prints D .683 for -11, but its C (.486) and E (.804) satisfy the relations every other row holds (C - D/2 - T = .110 and E - D/2 - T - Y = .060) only for D .688, the 11/16 tube size; the model uses the printed .683.",
    "Model. Note 1 requires a wedge on -6 and larger that note 4 has touching the lower-foot cushion, but figure 1 gives no wedge dimensions, so its size and profile must be set before it can be modeled.",
    "Model. Figure 1 draws the cushion along the lower foot and down the upper leg to the wedge but gives no dimension for where it ends on either leg; the model carries it on the loop arc only."
   ]
  },
  {
   "id": "MIL-DTL-85731/1C",
   "slug": "mil-dtl-85731-1c",
   "title": "Fastener, electronic equipment, positive self-locking",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-85731_1C Fastener, electronic equipment",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 52,
   "dimensions": 740,
   "dimensions_met": 740,
   "kind": "Detail specification sheet",
   "dated": "05 October 2017",
   "status": "Active, 22 July 2022",
   "newest": "Revision C Notice 1 - Validation, 22 July 2022",
   "superseding": "",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-85731_1C package.pdf",
    "scan": "MIL-DTL-85731_1C legacy scan.pdf",
    "clean": "MIL-DTL-85731_1C clean copy.pdf",
    "record": "MIL-DTL-85731_1C validation record.pdf",
    "sheet": "MIL-DTL-85731_1C 3D model.pdf",
    "parts": "MIL-DTL-85731_1C parts list.pdf",
    "inspection": "MIL-DTL-85731_1C inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 4, page 6",
   "pictures": {
    "iso": "Models/views/M85731_1-14-freecad.png",
    "pair": "Models/views/M85731_1-14-pair.png",
    "record": "Models/views/M85731_1-14-record.png",
    "front": "Models/views/M85731_1-14-front.png",
    "top": "Models/views/M85731_1-14-top.png",
    "right": "Models/views/M85731_1-14-right.png",
    "cut": "Models/views/M85731_1-14-cut.png"
   },
   "shown_part": "M85731/1-14",
   "application": "FreeCAD 1.1.4",
   "modeled": "52 solids, one per part number: the -1 to -10 fastener assemblies as single envelope solids (eye end, screw, locking collar with its conical recess, knob and screw end) with the A, CP and ACP suffixes of -5 to -10, the -11 to -14 hooks and the -15 to -22 hinges, each steel part with its C (CRES) twin of the same geometry.",
   "not_modeled": [
    "Fastener internals: the separate screw, collar, knob, washer, washer stop, spacer stop and retaining ring, the thread form, the locking area serrations (30\u00b0 and 15\u00b0 lock increments), the 1.000 max thread length and (.230) thread start.",
    "Knob lobes and the straight or diamond knurl (envelopes are cylinders at the across-lobes or knurl diameter), the identification marking (note 4) and the \u00d8.090 surface holes (note 10).",
    "The crescent pocket of figures 2 (-3, -4) and 3 with its J flat (.490 min): the solids carry a full conical ring recess, which has no flats.",
    "The self positioning washer (.094), spring MS24585C291 and self locking nut MS21083C5 (suffix CP and ACP), the spacer stop's own diameter and the .250 spacer stop length as a separate part.",
    "The optional 0.312-24 thread on -5 to -7 (table II note 1/).",
    "Hook R.031 inside bend radius and the rounded outer corner of the bend; the 16-1/2\u00b0 locking collar mating surface (ref) drawn with the -11 and -12 hook.",
    "Special hook tips (MIL-DTL-85731/1-11), the figure 1 installation geometry (45\u00b0 load line, 20\u00b0 fastener axis), the MS20392 pin and MS24665 cotter pin.",
    "Maximum weight (table I), loads, unlocking torque, materials, finishes, plating, lubricant and inspections."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 4 scanned. SHA-256 074d4dd89949.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "930 of 1,403 items agreed. All 25 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "47 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 6 tables (168 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "52 solids in STEP AP242. 740 of 740 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 1 - Validation, 22 July 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figures 2 and 3 give no locking collar length, knob thickness or knob position along the screw, so the fastener envelopes take them from the drawing proportions; the overall A and the collar face B are the only lengths fixed.",
    "Model. Figure 2 gives no eye end outer radius for -1 to -4; the solids use the table II radius for the same thread (.190 and .156).",
    "Model. Figure 2 gives the -1 and -2 eye hole as \u00d8.193, while table IV mates -1 and -2 with hinges -20 and -22, whose pivot hole is .160 to .165 (the -3 and -4 eye hole, \u00d8.128, matches the .128 to .133 pivot hole of their hinges); the pin size for -1 and -2 should be confirmed."
   ]
  },
  {
   "id": "MIL-DTL-8790F w/AMENDMENT 3",
   "slug": "mil-dtl-8790f-w-amendment-3",
   "title": "Hose assemblies, rubber, hydraulic, high pressure 3,000 psi, operating temperature range -65\u00b0F to +275\u00b0F, field attachable",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-8790F w_AMENDMENT 3 Hose assemblies, rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 16,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "2 January 2024",
   "status": "Active, 2 January 2024",
   "newest": "Revision F Amendment 3 (all previous amendments incorporated), 2 January 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-8790F w_AMENDMENT 3 package.pdf",
    "scan": "MIL-DTL-8790F w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MIL-DTL-8790F w_AMENDMENT 3 clean copy.pdf",
    "record": "MIL-DTL-8790F w_AMENDMENT 3 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "16 pages, 0 scanned. SHA-256 5742e36cc75e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,514 of 5,514 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "24 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "14 pages of searchable text, 6 tables (246 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-8790 is the general specification for the hose assemblies and defines materials, pressures, test methods and qualification, with only the minimum inspection diameter A (Table V) and test bend radii and sample lengths (Table I); the hose and fitting shapes are fixed in the MS28759, MS28762 and MS2892x sheets.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 3 (all previous amendments incorporated), 2 January 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-DTL-8795G w/AMENDMENT 2",
   "slug": "mil-dtl-8795g-w-amendment-2",
   "title": "Hose assemblies, elastomeric, hydraulic, fuel, coolant, and oil resistant, general specification for",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-DTL-8795G w_AMENDMENT 2 Hose assemblies, elastomeric",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 11,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification",
   "dated": "2 January 2024",
   "status": "Active, 2 January 2024",
   "newest": "Revision G Amendment 2 (all previous amendments incorporated), 2 January 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-DTL-8795G w_AMENDMENT 2 package.pdf",
    "scan": "MIL-DTL-8795G w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-DTL-8795G w_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-DTL-8795G w_AMENDMENT 2 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "11 pages, 0 scanned. SHA-256 5616be13fe4c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,323 of 3,610 items agreed. All 21 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "199 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 13 tables (325 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-DTL-8795 is a general specification for elastomeric hose assemblies built from MIL-DTL-8794 hose and MIL-DTL-5070 adapters that sets test lengths, bend radii and pressures (Table I), the minimum inner-tube bulge diameter C (Figure 1) and the inspection ball gauges (Table IV), and leaves the hose and adapter dimensions to MS28741 and MIL-DTL-8795/1.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Amendment 2 (all previous amendments incorporated), 2 January 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-I-631D",
   "slug": "mil-i-631d",
   "title": "Insulation, electrical, synthetic-resin composition, nonrigid",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-I-631D Insulation, electrical",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 32,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Military specification",
   "dated": "15 November 1961",
   "status": "Active, 25 February 2026",
   "newest": "Revision D Notice 2 - Validation, 25 February 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-I-631D package.pdf",
    "scan": "MIL-I-631D legacy scan.pdf",
    "clean": "MIL-I-631D clean copy.pdf",
    "record": "MIL-I-631D validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "32 pages, all scanned. SHA-256 eb8918dddb60.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "11,791 of 12,200 items agreed. 259 differences went to a third reader. A second pass settled 5 from the sheet's layout (a point the scan did not print). 26 readings remain open. 4 marks outside the technical content are kept as transcription notes.",
     "result": "26 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "876 checks on size series and limits. 23 breaks checked against the scan: 22 as printed, 1 doubtful on the page and listed as open.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "33 pages of searchable text, 21 tables (2,437 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-I-631 is a material specification for nonrigid synthetic-resin electrical insulation that sets types, forms (film, sheet, tape and tubing), electrical, physical and aging property values (Tables I to III), and only thickness, width, length and tubing inside-diameter and wall-thickness tolerances by size (Tables IV to IX), with no drawing of the product; its only figure, Figure 1, is the softening-temperature test fixture, not a part.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 2 - Validation, 25 February 2026. ASSIST also holds Revision D Interim Amendment 1 (9 March 1962), Revision D Interim Amendment 2 (6 November 1962), Revision D Amendment 3 (19 July 1963), Revision D Interim Amendment 4 (15 June 1964), Revision D Amendment 5 (20 June 1968) and Revision D Amendment 6 (2 June 1987). They were issued after this revision and are not applied in this record.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Page 3, paragraph reference at the start of the second line of 3.2.4: read as (see 6.2), could be (see 3.2).",
    "Open reading. Table II, Volume resistivity (form S only), C-96/23/96 row, column D: read as 12^12, could be 10^12.",
    "Open reading. Table III, rows 16 and 18 (Dielectric constant, C-96/23/0, at 1 kilocycle and at 1 megacycle), columns 6 and 7 (A natural colors, A other colors): read as 2.5, could be 2.9.",
    "Open reading. Table III, row 20 (Volume resistivity), column 3 (Conditioning procedure): read as D-24/23, could be Dr-24/23.",
    "Open reading. Table III, row 25 (Elongation, E-400/130), column 11 (F Grade c): read as 35, could be 39 or 59.",
    "Open reading. Table IV, row 7 (.0075), column 2 (Type G): read as .0003, could be .0005.",
    "Open reading. Table VIII, row 28 (5/8 in.), column 3 (Inside diameter Minimum): read as .825, could be .625.",
    "Open reading. Table XI, row 15 (Increasing pressure), column 3: read as 4.6.3, could be 4.6.6.",
    "Open reading. Table XI, row 23 (After ultra-violet-light aging), column 2: read as 3.5.2.3, could be 3.5.2.2.",
    "Open reading. Page 14, Reference after 'storage specified in': read as 4.6.13, could be 4.6.18.",
    "Open reading. Page 16, row 2, column 2: read as 60 linear feet., could be 80 linear feet.",
    "Open reading. Page 16, row 3, column 2: read as 25 linear feet., could be 35 linear feet.",
    "Open reading. Table XII, row 3, column 1: read as 41 to 65, could be 41 to 85.",
    "Open reading. Table XII, row 4, column 1: read as 66 to 110, could be 86 to 110.",
    "Open reading. Page 21, Temperature: read as 23\u00b0 \u00b1 2\u00b0C., could be 23\u00b0 - 2\u00b0C.",
    "Open reading. Page 22, First sentence, table numbers: read as tables I, III and III, could be tables I, II and III.",
    "Open reading. Page 22, Clamp spacing: read as 6 inches, could be 8 inches.",
    "Open reading. Page 22, Heating rate: read as 1\u00b0C., could be 1 C.",
    "Open reading. Page 22, Word before 'a suitable means': read as ano, could be and.",
    "Open reading. Page 24, Rod separation: read as 16 to 21 inches, could be 16 to 31 inches.",
    "Open reading. Page 24, Enclosure width: read as 12 inches wide, could be 13 inches wide.",
    "Open reading. Page 24, Wire diameter: read as 0.029, could be 0.020 or 0.039.",
    "Open reading. Page 31, after whatsoever: read as whatsoever;, could be whatsoever,.",
    "Open reading. Page 31, Permission to manufacture: read as to.",
    "Open reading. Page 31, Final mark: read as Preparing activity:, could be Preparing activity.",
    "Open reading. Figure 1, callouts: read as small rotated fractions along the left edges of both views and beside the knobs.",
    "Printed value to confirm. Table IV, column 'Nominal thickness / Inch': 0.005 then 0.001. Page 10 prints 0.005 clearly in the first row, above .0010; the printed value looks wrong for the film series, which reads as 0.0005 (tolerance 0.0001), a point for an engineer.",
    "Printed value to confirm. Table VIII, column 'Inside diameter (inches) / Minimum': 0.825 then 0.75. Page 12 prints .825 for the 5/8 in. minimum; the first digit has a closed upper loop like the 8 of .875 below, but a 5/8 in. size with maximum .655 calls for .625, so the printed value itself looks wrong, a point for an engineer. Uncertain entry for Table VIII stays for the resolver.",
    "Printed value to confirm. Table VIII, row '5/8 in.', 'inside diameter (inches)': 0.655 then 0.825. Page 12 prints minimum .825 above maximum .655 for 5/8 in.; the minimum looks like a printing error for .625, a point for an engineer (same cell as the flag above)."
   ]
  },
  {
   "id": "MIL-PRF-15160/9G w/Amendment 1",
   "slug": "mil-prf-15160-9g-w-amendment-1",
   "title": "Fuses, instrument, power, and telephone (nonindicating), style F09",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-15160_9G w_Amendment 1 Fuses, instrument",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 98,
   "dimensions": 686,
   "dimensions_met": 686,
   "kind": "Performance specification sheet",
   "dated": "21 March 2017",
   "status": "Active, 22 December 2021",
   "newest": "Revision G Notice 1 - Validation, 22 December 2021",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-15160_9G w_Amendment 1 package.pdf",
    "scan": "MIL-PRF-15160_9G w_Amendment 1 legacy scan.pdf",
    "clean": "MIL-PRF-15160_9G w_Amendment 1 clean copy.pdf",
    "record": "MIL-PRF-15160_9G w_Amendment 1 validation record.pdf",
    "sheet": "MIL-PRF-15160_9G w_Amendment 1 3D model.pdf",
    "parts": "MIL-PRF-15160_9G w_Amendment 1 parts list.pdf",
    "inspection": "MIL-PRF-15160_9G w_Amendment 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/F09B250V1_1_8A-freecad.png",
    "pair": "Models/views/F09B250V1_1_8A-pair.png",
    "record": "Models/views/F09B250V1_1_8A-record.png",
    "front": "Models/views/F09B250V1_1_8A-front.png",
    "top": "Models/views/F09B250V1_1_8A-top.png",
    "right": "Models/views/F09B250V1_1_8A-right.png",
    "cut": "Models/views/F09B250V1_1_8A-cut.png"
   },
   "shown_part": "F09B250V1 1/8A",
   "application": "FreeCAD 1.1.4",
   "modeled": "98 envelope solids of the style F09 cartridge fuse, one per PIN in Table I (49 ratings, each with standard and silver plated ferrules), all on the single Figure 1 body size: two ferrules of diameter B and length C on a body of diameter D, overall length A.",
   "not_modeled": [
    "The inside of the fuse: fiber tube bore and wall, fuse element and the joint where each ferrule caps the tube.",
    "The rounded ferrule edges drawn in Figure 1, which carry no radius.",
    "Materials (brass, copper or copper alloy ferrules; fiber tube body), nickel, bright alloy or silver plating, marking and the 2 inch-pound ferrule torque strength.",
    "Electrical ratings, overload and short circuit interrupt times, shock and vibration requirements in Table I, Table II and the requirements list."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 bd9fd60f40f5.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,229 of 1,327 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "18 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 6 tables (818 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "98 solids in STEP AP242. 686 of 686 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Notice 1 - Validation, 22 December 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table I lists characteristic B at 3 2/10A (F09B250V3 2/10A), while Table III prints the superseding number as F09B250V 3 1/10A with superseded F09G3R20B; the solid is named from Table I and the correct rating must be confirmed."
   ]
  },
  {
   "id": "MIL-PRF-18953C(SH) w/AMENDMENT 1",
   "slug": "mil-prf-18953c-sh-w-amendment-1",
   "title": "Fans, vaneaxial and tubeaxial, ventilation and air conditioning, naval shipboard",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-18953C(SH) w_AMENDMENT 1 Fans, vaneaxial and tubeaxial",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 27,
   "solids": 26,
   "dimensions": 208,
   "dimensions_met": 208,
   "kind": "Performance specification",
   "dated": "1 August 2017",
   "status": "Active, 7 April 2026",
   "newest": "Revision C Notice 1 - Validation, 7 April 2026",
   "superseding": "",
   "preparing_activity": "Naval Sea Systems Command (Ship Systems)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-18953C(SH) w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-18953C(SH) w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-18953C(SH) w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-18953C(SH) w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-18953C(SH) w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-18953C(SH) w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-18953C(SH) w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 21",
   "pictures": {
    "iso": "Models/views/MIL-PRF-18953_A30-freecad.png",
    "pair": "Models/views/MIL-PRF-18953_A30-pair.png",
    "record": "Models/views/MIL-PRF-18953_A30-record.png",
    "front": "Models/views/MIL-PRF-18953_A30-front.png",
    "top": "Models/views/MIL-PRF-18953_A30-top.png",
    "right": "Models/views/MIL-PRF-18953_A30-right.png",
    "cut": "Models/views/MIL-PRF-18953_A30-cut.png"
   },
   "shown_part": "MIL-PRF-18953 A30",
   "application": "FreeCAD 1.1.4",
   "modeled": "22 vaneaxial fan casings (sizes A1/4 to A30, figure 1) and 4 tubeaxial fan casings (sizes L1/2 to L3, figure 2), each an interface envelope of the casing bore, end flanges, bolt circle and bolt holes at the figure's dimensions; each solid also stands for the X-A or X-L fan of the same size, which 6.1.1 and 6.1.2 make dimensionally identical.",
   "not_modeled": [
    "Everything inside the casings that the figures draw without dimensions: fan wheel, stationary vanes, motor, motor mounting, conduit and conduit box, cable and name plate.",
    "The optional extra stiffening flange of 3.10.4.4, with its bolting and three dowels.",
    "The flange that 3.10.5.3 calls for at the tubeaxial bell (inlet) end and the safety screen of 3.10.5.4; figure 2 gives only the bell's outside diameter E at that end.",
    "The gussets between the tubeaxial flange and casing that the figure 2 end view draws, and the fillets between casing and flanges, which carry no dimensions.",
    "Motor data, maximum weights and the performance requirements of figures 3 to 5, which carry no geometry."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "27 pages, 2 scanned. SHA-256 fb9e84f73807.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "8,104 of 8,140 items agreed. 36 differences went to a third reader. 3 readings remain open.",
     "result": "3 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "264 checks on size series and limits. 31 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "25 pages of searchable text, 16 tables (1,178 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "26 solids in STEP AP242. 208 of 208 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Notice 1 - Validation, 7 April 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table III, row 6 (By measurement) and row 7 (By ear), columns 6 and 7 (Type 2/, Periodic 3/): read as ALL in the By measurement row only; By ear blank, could be ALL repeated in the Airborne noise group rows (By measurement and By ear).",
    "Open reading. Figure 4, Curve label at the right end, near 35 to 40 thousand CFM: read as A25, could be A29.",
    "Open reading. Figure 4, Curve label at the 2.0 to 2.5 inch line beside A17: read as A28, could be A26.",
    "Model. The figure 2 tolerance note reads \"Bolt hole diameter (C) tolerance shall be \u00b11/64 inch\", but figure 2 draws C across the bolt circle and the table gives C (9-1/2 to 17-3/8) apart from the 13/32 bolt hole diameter, so whether C carries \u00b11/64 or \u00b11/16 must be settled."
   ]
  },
  {
   "id": "MIL-PRF-19500/406N w/AMENDMENT 3",
   "slug": "mil-prf-19500-406n-w-amendment-3",
   "title": "Rectifier, semiconductor device, silicon, voltage regulator, device types 1N4460 through 1N4496 and 1N6485 through 1N6491, encapsulated (through-hole and surface mount packages) and unencapsulated, quality levels JAN, jantx, jantxv, jans, janhc, and jankc",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-19500_406N w_AMENDMENT 3 Rectifier, semiconductor device",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 41,
   "solids": 4,
   "dimensions": 38,
   "dimensions_met": 38,
   "kind": "Performance specification sheet",
   "dated": "5 August 2026",
   "status": "Active, 5 August 2026",
   "newest": "Revision N Amendment 3 (all previous amendments incorporated), 5 August 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-19500_406N w_AMENDMENT 3 package.pdf",
    "scan": "MIL-PRF-19500_406N w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MIL-PRF-19500_406N w_AMENDMENT 3 clean copy.pdf",
    "record": "MIL-PRF-19500_406N w_AMENDMENT 3 validation record.pdf",
    "sheet": "MIL-PRF-19500_406N w_AMENDMENT 3 3D model.pdf",
    "parts": "MIL-PRF-19500_406N w_AMENDMENT 3 parts list.pdf",
    "inspection": "MIL-PRF-19500_406N w_AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 4",
   "pictures": {
    "iso": "Models/views/MIL-PRF-19500_406_UM-freecad.png",
    "pair": "Models/views/MIL-PRF-19500_406_UM-pair.png",
    "record": "Models/views/MIL-PRF-19500_406_UM-record.png",
    "front": "Models/views/MIL-PRF-19500_406_UM-front.png",
    "top": "Models/views/MIL-PRF-19500_406_UM-top.png",
    "right": "Models/views/MIL-PRF-19500_406_UM-right.png",
    "cut": "Models/views/MIL-PRF-19500_406_UM-cut.png"
   },
   "shown_part": "MIL-PRF-19500/406 UM",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the four outlines of MIL-PRF-19500/406, one per package, each standing for every PIN that package carries: the DO-41 axial package of figure 1, the US square end-cap and UM DPC surface mount packages of figures 2 and 3, and the version A JANHC and JANKC die of figure 4.",
   "not_modeled": [
    "Each PIN is not a separate solid: 6.5 lists 1,200 encapsulated PINs (44 device types in DO-41 and US, 37 in UM, in up to three voltage tolerances and four quality levels) and 74 die PINs, each also available with eight RHA designators; the outline depends only on the package, so one solid stands for each package.",
    "The inside of the encapsulated packages (die, metallurgical bonds, body, wire bond, ceramic cavity): each solid is the outside shape as one body.",
    "The optional DO-41 contour of note 3, the rounded body and the heat slugs drawn at its ends: the body is a plain cylinder BD by BL with the slugs inside that length.",
    "The concave neck the US side view draws between each end cap and the body, which carries no dimension, and the .006 (0.15) profile-of-a-surface tolerance on the four sides of each end cap.",
    "The tapered lid and the seal ring the UM side and isometric views draw, which carry no dimension beyond CH, CL and CW.",
    "The die's cathode metallization (Ti/Ni/Ag, 1,200/1,800/30,000 \u00c5 nominal) as a layer of its own: the die block includes it.",
    "Lead finish and solder dip (every dimension is pre-solder dip), marking, and the electrical, thermal and test requirements, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "41 pages, 5 scanned. SHA-256 37ddeb81a620.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "6,341 of 7,474 items agreed. All 56 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "658 checks on size series and limits. 20 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "28 pages of searchable text, 20 tables (2,372 cells), 15 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 38 of 38 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision N Amendment 3 (all previous amendments incorporated), 5 August 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-19500/500F w/AMENDMENT 1",
   "slug": "mil-prf-19500-500f-w-amendment-1",
   "title": "Semiconductor device, diode, silicon, unipolar transient voltage suppressor, types 1N5555 through 1N5558, 1N5907, 1N5629 through 1N5665, JAN, jantx, and jantxv",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-19500_500F w_AMENDMENT 1 Semiconductor device, diode",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 20,
   "solids": 1,
   "dimensions": 13,
   "dimensions_met": 13,
   "kind": "Performance specification sheet",
   "dated": "16 November 2022",
   "status": "Active, 16 November 2022",
   "newest": "Revision F Amendment 1 (amendment incorporated), 16 November 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-19500_500F w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-19500_500F w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-19500_500F w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-19500_500F w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-19500_500F w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-19500_500F w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-19500_500F w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/MIL-PRF-19500_500_DO-13-freecad.png",
    "pair": "Models/views/MIL-PRF-19500_500_DO-13-pair.png",
    "record": "Models/views/MIL-PRF-19500_500_DO-13-record.png",
    "front": "Models/views/MIL-PRF-19500_500_DO-13-front.png",
    "top": "Models/views/MIL-PRF-19500_500_DO-13-top.png",
    "right": "Models/views/MIL-PRF-19500_500_DO-13-right.png",
    "cut": "Models/views/MIL-PRF-19500_500_DO-13-cut.png"
   },
   "shown_part": "MIL-PRF-19500/500 DO-13",
   "application": "FreeCAD 1.1.4",
   "modeled": "One envelope solid of the DO-13 package of figure 1, standing for all 126 PINs (42 types at JAN, JANTX and JANTXV): a round body .225 in diameter and .325 long with square ends, a .0725 diameter tubulation out to the .570 BLT length, and a .030 diameter lead 1.3125 long on the axis from the body (lead 1, cathode) and from the end of the tubulation (lead 2).",
   "not_modeled": [
    "The LU zone (.188 max) next to the body on lead 1 and next to the tubulation on lead 2, where note 4 lets the lead diameter vary for finishes and irregularities: the solid holds LD through the zone, so LU has no check.",
    "The pinched bulb and collar the figure draws on the tubulation, and the pinch or seal deformation note 5 allows along it: the tubulation is a plain cylinder at CD.",
    "The inside of the device (die, metallurgically bonded construction of 3.4.1, seal and case walls): the solid is the outside shape as one body.",
    "Lead finish (QML-19500), marking, polarity (lead 1 is the cathode and is connected to the case, note 6), and the electrical ratings and tests, none of which changes the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "20 pages, 1 scanned. SHA-256 4f67a502725e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,436 of 3,519 items agreed. All 48 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "540 checks on size series and limits. 14 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 9 tables (995 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "1 solid in STEP AP242. 13 of 13 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 1 (amendment incorporated), 16 November 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-22750H",
   "slug": "mil-prf-22750h",
   "title": "Coating, epoxy, high-solids",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-22750H Coating, epoxy",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 23,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "29 July 2025",
   "status": "Active, 29 July 2025",
   "newest": "Revision H, 29 July 2025",
   "superseding": "",
   "preparing_activity": "Army Research Laboratory, Weapons and Materials Research Directorate",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-22750H package.pdf",
    "scan": "MIL-PRF-22750H legacy scan.pdf",
    "clean": "MIL-PRF-22750H clean copy.pdf",
    "record": "MIL-PRF-22750H validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "23 pages, 0 scanned. SHA-256 0c700e453988.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "7,947 of 8,554 items agreed. All 19 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "19 pages of searchable text, 3 tables (214 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-22750H is a performance specification for high-solids epoxy coating that sets its types, classes, grades, composition, mixed-coating properties (Table I) and test methods (Table II), and it defines no part shape by dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H, 29 July 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-22885/10L",
   "slug": "mil-prf-22885-10l",
   "title": "Switch, push button, illuminated, indicator light for, modular, 4-LAMP",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-22885_10L Switch, push button",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 87,
   "dimensions": 1392,
   "dimensions_met": 1392,
   "kind": "Performance specification sheet",
   "dated": "27 November 2024",
   "status": "Active, 27 November 2024",
   "newest": "Revision L, 27 November 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-22885_10L package.pdf",
    "scan": "MIL-PRF-22885_10L legacy scan.pdf",
    "clean": "MIL-PRF-22885_10L clean copy.pdf",
    "record": "MIL-PRF-22885_10L validation record.pdf",
    "sheet": "MIL-PRF-22885_10L 3D model.pdf",
    "parts": "MIL-PRF-22885_10L parts list.pdf",
    "inspection": "MIL-PRF-22885_10L inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M22885_10-45-freecad.png",
    "pair": "Models/views/M22885_10-45-pair.png",
    "record": "Models/views/M22885_10-45-record.png",
    "front": "Models/views/M22885_10-45-front.png",
    "top": "Models/views/M22885_10-45-top.png",
    "right": "Models/views/M22885_10-45-right.png",
    "cut": "Models/views/M22885_10-45-cut.png"
   },
   "shown_part": "M22885/10-45",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 87 dash numbers M22885/10-01 to -88 of Table III, all alike: the 1.040 by .800 lens section and 1.200 by .960 mounting flange standing .140 MAX in front of the panel, the 1.090 by .850 body to the spring clip at 1.75 MAX behind the panel, and a terminal zone to 1.93 MAX.",
   "not_modeled": [
    "The spring clip, adjustable mounting bracket, terminals D, H, C, B, G and A, plunger and plunger stop as separate shapes, which notes 7, 8 and 9 leave to the designer within the envelope.",
    "The plunger's free (.100 MAX) and extended (.190) positions behind the switch mounting plane; Figure 1 does not place that plane on the envelope and the plunger lies inside the terminal zone.",
    "The .625 lens window lines and the .546 recommended lens engraving area (note 6) on the front face, the lens plate location notch, the lamp board index tab, the TOP mark and the circuit schematic marking (notes 4 and 5).",
    "The narrow (M22885/85-01) and extended (M22885/85-02) lens plate shapes, defined in MIL-PRF-22885/85, and the front outline of units supplied without a lens plate.",
    "Lens styles A to F, lamp circuits 1 to 5, the EMI screen, diffuser, color filters, lamps and panel seal, which change no outside dimension.",
    "The Figure 2 cutouts (1.115 by .875, 1.210 and .970 matrix pitch, .130 web, .450 spacing with panel seals), checked as fits rather than modeled, and the 2.1 ounce weight limit."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 3 scanned. SHA-256 5862cb0e05dd.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "968 of 975 items agreed. All 9 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "166 checks on size series and limits. 15 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 3 tables (149 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "87 solids in STEP AP242. 1,392 of 1,392 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision L, 27 November 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table III, column 'Dash number 1/ / Without EMI screen / Narrow front lens plate 2/ M22885/85-01': 7 then 2. Page 7 prints 02 3/ in the eighth row (lens A, circuit 2, beside 15 3/ and 22 3/), the same number as the second row; the series 01 to 07 points to 08, which appears nowhere in the table, so the printed 02 looks wrong for its series and is a point for an engineer.",
    "Model. Table III prints dash number 02 in two rows, for lens style A with circuit code 4 and with circuit code 2, and no dash number 08 appears; one solid M22885/10-02 is built since the envelope is the same.",
    "Model. Figure 1 draws the adjustable mounting bracket behind the panel about as wide as the 1.200 by .960 flange but gives it no dimension, so the envelope behind the panel is taken at the 1.090 by .850 body section.",
    "Model. At the top of the \u00b1.016 general tolerance of note 3 the 1.200 by .960 flange reaches 1.216 by .976, more than the 1.210 and .970 matrix pitch of Figure 2, so adjacent flanges in a matrix could touch."
   ]
  },
  {
   "id": "MIL-PRF-23377K",
   "slug": "mil-prf-23377k",
   "title": "Primer coatings: epoxy, high-solids",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-23377K Primer coatings-epoxy, high-solids",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 19,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "7 June 2012",
   "status": "Active, 12 September 2019",
   "newest": "Revision K Notice 1 - Validation, 12 September 2019",
   "superseding": "",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-23377K package.pdf",
    "scan": "MIL-PRF-23377K legacy scan.pdf",
    "clean": "MIL-PRF-23377K clean copy.pdf",
    "record": "MIL-PRF-23377K validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "19 pages, 0 scanned. SHA-256 51f58e09e163.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "6,785 of 6,785 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "15 pages of searchable text, 3 tables (138 cells), 0 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-23377K is a performance specification for high-solids epoxy primer coatings that defines types, classes, kit sizes, composition, test panels and test methods, with no part drawings or dimensions.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K Notice 1 - Validation, 12 September 2019.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-24236/1T",
   "slug": "mil-prf-24236-1t",
   "title": "Switches, thermostatic, (bimetallic), subminiature, type I, hermetically sealed, single pole, single throw (spst), 5 amperes, and low level",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-24236_1T Switches, thermostatic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 24,
   "solids": 335,
   "dimensions": 3960,
   "dimensions_met": 3960,
   "kind": "Performance specification sheet",
   "dated": "7 November 2025",
   "status": "Active, 7 November 2025",
   "newest": "Revision T, 7 November 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-24236_1T package.pdf",
    "scan": "MIL-PRF-24236_1T legacy scan.pdf",
    "clean": "MIL-PRF-24236_1T clean copy.pdf",
    "record": "MIL-PRF-24236_1T validation record.pdf",
    "sheet": "MIL-PRF-24236_1T 3D model.pdf",
    "parts": "MIL-PRF-24236_1T parts list.pdf",
    "inspection": "MIL-PRF-24236_1T inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M24236_1-1100-freecad.png",
    "pair": "Models/views/M24236_1-1100-pair.png",
    "record": "Models/views/M24236_1-1100-record.png",
    "front": "Models/views/M24236_1-1100-front.png",
    "top": "Models/views/M24236_1-1100-top.png",
    "right": "Models/views/M24236_1-1100-right.png",
    "cut": "Models/views/M24236_1-1100-cut.png"
   },
   "shown_part": "M24236/1-1100",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of the 19 Figure 1 configurations, one per part number: each of the 324 Table I dash numbers (configurations A, A1, A2, A3, B, B1, B2 and B3) with the outline of its configuration, and one solid for each of the configurations A4 to A8 and B4 to B9, which only the coded PIN of Table II reaches; each is a round case with straight solder-lug or right angle terminals and, by configuration, a diamond or oval flange, a flat or L-shaped bracket, a threaded stud with or without a hex flange, or a band clamp.",
   "not_modeled": [
    "The switch inside the case (bimetallic disc, contacts, glass seals); the case is solid.",
    "The temperature settings, contact action, class, electrical ratings, endurance life, insulation resistance and weight limits (Tables I, III, V, VI, Figure 2), which do not change the outline; the dash numbers of one configuration share one solid.",
    "Every coded PIN M24236/1-AGFEHL: the temperature letters do not change the outline, so each configuration is built once and stands for all its coded PINs.",
    "The small round boss at the centre of the header, the header rim and end step of the case, the step in the A3, A4 and B4 bodies, the stud thread relief and end chamfer, the crowned face of the hex flange, the bend radius of the A8/B9 bracket and the rounded tips of the flanges, none of which Figure 1 dimensions; the case length of A3 (.280 to .400 by note 7) is not separately carried because the A3 body is one cylinder.",
    "The worm screw housing of the A7 and B8 band clamp, which Figure 1 draws but does not dimension; the band is shown at the middle of its \u00d8.375 to \u00d8.875 range.",
    "Thread form: studs are plain cylinders at the major diameter the callout prints.",
    "The alternate views of B1 and B2 (terminals turned the other way, note 4)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "24 pages, 0 scanned. SHA-256 baf8544855bb.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,717 of 3,771 items agreed. All 27 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "768 checks on size series and limits. 55 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "24 pages of searchable text, 7 tables (3,121 cells), 13 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "335 solids in STEP AP242. 3,960 of 3,960 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision T, 7 November 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 sends the offset of the right angle terminal hole from the vertical centreline to note 5 and configurations A and B to note 6, but note 5 says mounting brackets are not furnished and note 6 covers configurations moved to MIL-PRF-24236/20, so the hole offset has no printed value.",
    "Model. Note 5 says mounting brackets are not to be furnished but names no configuration; the B3, A8 and B9 brackets are modeled as Figure 1 dimensions them.",
    "Model. Figure 1 prints the B5 stud as .165-32 UNC-2A and the A5 and B6 studs as .191-32 UNF-2A, while the Unified series has #8-32 UNC at .1640 and #10-32 UNF at .1900; the studs are modeled at the printed .165 and .191."
   ]
  },
  {
   "id": "MIL-PRF-26626H",
   "slug": "mil-prf-26626h",
   "title": "Hose assembly, reinforced, cryogenic, oxygen",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-26626H Hose assembly, reinforced",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 3,
   "dimensions": 36,
   "dimensions_met": 36,
   "kind": "Performance specification",
   "dated": "17 June 2026",
   "status": "Active, 17 June 2026",
   "newest": "Revision H, 17 June 2026",
   "superseding": "",
   "preparing_activity": "Air Force Sustainment Center - Oklahoma City",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-26626H package.pdf",
    "scan": "MIL-PRF-26626H legacy scan.pdf",
    "clean": "MIL-PRF-26626H clean copy.pdf",
    "record": "MIL-PRF-26626H validation record.pdf",
    "sheet": "MIL-PRF-26626H 3D model.pdf",
    "parts": "MIL-PRF-26626H parts list.pdf",
    "inspection": "MIL-PRF-26626H inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure I, page 11",
   "pictures": {
    "iso": "Models/views/M26626-6-_L_-freecad.png",
    "pair": "Models/views/M26626-6-_L_-pair.png",
    "record": "Models/views/M26626-6-_L_-record.png",
    "front": "Models/views/M26626-6-_L_-front.png",
    "top": "Models/views/M26626-6-_L_-top.png",
    "right": "Models/views/M26626-6-_L_-right.png",
    "cut": "Models/views/M26626-6-_L_-cut.png"
   },
   "shown_part": "M26626-6-(L)",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid of revolution for each of the 3 dash numbers, M26626-5-(L), -6-(L) and -8-(L), at a representative length L of 12.000 inch: the inner liner and wire braid as one hose body with the braid cut back from the liner end as Figure I draws it, and at each end the flared insert with its minimum bore A and its 74\u00b0 flare seat of mouth diameter D.",
   "not_modeled": [
    "The coupling nuts (AN818-5J or 5K, AN818-6J or 6K, AN818-8J or 8K, or AS1790 and AS4370 equivalents) with their SAE AS8879 threads and the free swivel after assembly; AN818 and those standards dimension the nuts, this document does not.",
    "The insert retainer, drawn in phantom as a reference and optional under 3.4.2, and the .065 max clearance at both ends, which lies between the retainer and the coupling nut.",
    "Every other length: L is set per order by the last dash number of the PIN, and other lengths differ only in the straight run of hose between the ends.",
    "The weave of the corrosion resistant wire braid, the tetrafluoroethylene based liner and Class 304 or 316 insert materials, the mating detail of SAE AS4395, the permanent attachment of the end fittings and the marking.",
    "Requirements that are not shape: 1,000 psig proof and 2,200 psig burst with leakage under 2 cm\u00b3 per minute, the 300 pound tensile load, the 260\u00b0F and -65\u00b0F exposures, bending on 6 and 8 inch mandrels, vibration, odor, cleanliness, corrosion and ozone resistance."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, 0 scanned. SHA-256 228932cbf638.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,892 of 3,018 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 8 tables (100 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "3 solids in STEP AP242. 36 of 36 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H, 17 June 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Paragraph 3.4.2 requires an insert retainer, if used, to conform to the tolerances on figure I, but figure I marks the retainer REF and gives it no dimension or tolerance other than the .065 max clearance."
   ]
  },
  {
   "id": "MIL-PRF-26/3F",
   "slug": "mil-prf-26-3f",
   "title": "Resistor, fixed, wirewound (power type), styles RW29, RW30 1/, RW31, RW32 1/, RW33, RW34 1/, RW35, RW36 1/, RW37, RW38, RW39 1/, and RW47",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-26_3F Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 12,
   "dimensions": 156,
   "dimensions_met": 156,
   "kind": "Performance specification sheet",
   "dated": "8 April 2022",
   "status": "Active, 8 April 2022",
   "newest": "Revision F, 8 April 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-26_3F package.pdf",
    "scan": "MIL-PRF-26_3F legacy scan.pdf",
    "clean": "MIL-PRF-26_3F clean copy.pdf",
    "record": "MIL-PRF-26_3F validation record.pdf",
    "sheet": "MIL-PRF-26_3F 3D model.pdf",
    "parts": "MIL-PRF-26_3F parts list.pdf",
    "inspection": "MIL-PRF-26_3F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/RW35-freecad.png",
    "pair": "Models/views/RW35-pair.png",
    "record": "Models/views/RW35-record.png",
    "front": "Models/views/RW35-front.png",
    "top": "Models/views/RW35-top.png",
    "right": "Models/views/RW35-right.png",
    "cut": "Models/views/RW35-cut.png"
   },
   "shown_part": "RW35",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the twelve styles RW29 to RW47 of Figure 1, one per style: a tube of diameter B and length A with the core bore C through it, and two flat .016 terminals .250 wide standing to height D above the body axis, each set .062 in from a body end and pierced by a .085 hole.",
   "not_modeled": [
    "Every PIN of a style (characteristic V or N and coded resistance value) shares that style's outline, so one solid per style stands for all of them.",
    "The center tap terminal of center tapped resistors (6.7, inactive for new design), which the sheet does not dimension.",
    "The rounded end bands and the narrower coated middle of the body drawn on Figure 1, and the winding, core and coating as separate parts.",
    "The MS75009 bracket assemblies of 6.4.1, and the power, resistance, temperature characteristic, overload, dielectric and derating requirements of Tables I to IV and Figure 2, which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 2b81e43071df.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,880 of 1,882 items agreed. All 2 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "131 checks on size series and limits. 7 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 6 tables (260 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "12 solids in STEP AP242. 156 of 156 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F, 8 April 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The table prints D as 0.8012 for RW34 and RW35, while the inch/mm equivalents list beside it has no 0.8012 and gives 0.812 (20.62 mm), a value no other dimension uses; the solids use 0.8012 as printed, and 0.812 lies within its \u00b10.125.",
    "Model. Figure 1 does not locate the .085 hole on the terminal or dimension the body's end bands and narrower middle, so the solids center the hole .125 below the terminal top and carry B over the whole length; an engineer must take these from a qualified source's drawing before using the model for wiring or clearance checks."
   ]
  },
  {
   "id": "MIL-PRF-39003/3K",
   "slug": "mil-prf-39003-3k",
   "title": "Capacitor, fixed, electrolytic (solid electrolyte), tantalum (polarized, sintered slug), established reliability, style CSR23",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-39003_3K Capacitor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 8,
   "dimensions": 96,
   "dimensions_met": 96,
   "kind": "Performance specification sheet",
   "dated": "13 January 2023",
   "status": "Active, 13 January 2023",
   "newest": "Revision K, 13 January 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-39003_3K package.pdf",
    "scan": "MIL-PRF-39003_3K legacy scan.pdf",
    "clean": "MIL-PRF-39003_3K clean copy.pdf",
    "record": "MIL-PRF-39003_3K validation record.pdf",
    "sheet": "MIL-PRF-39003_3K 3D model.pdf",
    "parts": "MIL-PRF-39003_3K parts list.pdf",
    "inspection": "MIL-PRF-39003_3K inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39003_03_case_B-freecad.png",
    "pair": "Models/views/M39003_03_case_B-pair.png",
    "record": "Models/views/M39003_03_case_B-record.png",
    "front": "Models/views/M39003_03_case_B-front.png",
    "top": "Models/views/M39003_03_case_B-top.png",
    "right": "Models/views/M39003_03_case_B-right.png",
    "cut": "Models/views/M39003_03_case_B-cut.png"
   },
   "shown_part": "M39003/03 case B",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style CSR23 capacitor, one per case size A to D at each of the two lead lengths: a round case of diameter D with square ends, a boss .094 long for the negative-end projection and a seal boss on the positive end that ends at J, and a lead of diameter M on the axis out of each end, 1.500 long for figure 1 and 1.000 long for tape and reel (note 4).",
   "not_modeled": [
    "Each of the 696 PINs of table I (87 ratings at 8 failure rate levels) as its own solid: they share the outline of their case size, so one solid stands for each case size at each lead length (136 A, 168 B, 208 C, 184 D).",
    "The inside of the capacitor (the sintered tantalum slug, the solid electrolyte, the hermetic seal and the case wall): each solid is the outside shape as one body.",
    "The case insulation as a separate sleeve and its extension of .015 min beyond each end of the case, or the lap over the ends of a shrink-fitted sleeve (note 3).",
    "The rounded corners drawn at the negative end of the case, the concave flare of the negative-end projection and the taper from the positive-end seal to the lead, all drawn without dimensions.",
    "The lead types N-32, N-52, W-32 and W-52 of MIL-STD-1276, the + polarity mark, marking, the surge current and solder letter of the PIN, and the electrical ratings and tests, none of which the outline shows."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 5a5c973b8952.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,080 of 2,092 items agreed. All 13 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "516 checks on size series and limits. 25 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 3 tables (1,418 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "8 solids in STEP AP242. 96 of 96 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K, 13 January 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 draws the 1.500 \u00b1.250 lead length on the positive lead only, from the end of J, and gives no datum for the negative lead.",
    "Model. Note 3 has the case insulation extend .015 min beyond each end, but figure 1 does not say whether D, L and J are taken over that insulation or over the metal case."
   ]
  },
  {
   "id": "MIL-PRF-39006/22L",
   "slug": "mil-prf-39006-22l",
   "title": "Capacitor, fixed, electrolytic (nonsolid electrolyte), tantalum (polarized, sintered slug), +85\u00b0C (voltage derated to +125\u00b0C), established reliability, style CLR79",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-39006_22L Capacitor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 19,
   "solids": 4,
   "dimensions": 56,
   "dimensions_met": 56,
   "kind": "Performance specification sheet",
   "dated": "12 April 2023",
   "status": "Active, 12 April 2023",
   "newest": "Revision L, 12 April 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-39006_22L package.pdf",
    "scan": "MIL-PRF-39006_22L legacy scan.pdf",
    "clean": "MIL-PRF-39006_22L clean copy.pdf",
    "record": "MIL-PRF-39006_22L validation record.pdf",
    "sheet": "MIL-PRF-39006_22L 3D model.pdf",
    "parts": "MIL-PRF-39006_22L parts list.pdf",
    "inspection": "MIL-PRF-39006_22L inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39006_22_case_T2-freecad.png",
    "pair": "Models/views/M39006_22_case_T2-pair.png",
    "record": "Models/views/M39006_22_case_T2-record.png",
    "front": "Models/views/M39006_22_case_T2-front.png",
    "top": "Models/views/M39006_22_case_T2-top.png",
    "right": "Models/views/M39006_22_case_T2-right.png",
    "cut": "Models/views/M39006_22_case_T2-cut.png"
   },
   "shown_part": "M39006/22 case T2",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style CLR79 capacitor, one per case size T1 to T4: a round insulated case of length L built to the insulated case D max with square ends, a weld boss .094 long on the negative end, a tantalum feed-through .078 in diameter and .250 long on the positive end, and a lead .025 in diameter on the axis out of each end, E long from the end of the case.",
   "not_modeled": [
    "Every one of the 880 dash numbers of table I (264 T1, 264 T2, 264 T3, 88 T4), each with or without the H vibration and shock letter, and the 880 compression seal PINs of table III: they share the outline of their case size, so one solid stands for each case size.",
    "The basic case diameter D (.188 \u00b1.016 for T1): it lies under the insulating sleeve and is not a surface of the envelope solid, so it has no check.",
    "The inside of the capacitor (the sintered tantalum slug, the electrolyte, the case wall and the glass seal): each solid is the outside shape as one body.",
    "The insulating sleeve as a separate body, its length over the basic case (footnote 1/ refers it to MIL-PRF-39006) and its lap over the ends of the case drawn dashed in figure 1.",
    "The shape of the terminal weld at the negative end and of the external weld at the end of the feed-through (note 4), both drawn without dimensions, and the positional tolerance zone of the positive terminal, which the solids place on true position.",
    "The lead types N32, N51 and N52 of MIL-STD-1276, marking, the ring of + polarity symbols at the positive end, and the electrical ratings and tests, none of which change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "19 pages, 0 scanned. SHA-256 4535f8c77452.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "8,931 of 9,175 items agreed. All 68 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "5,271 checks on size series and limits. 375 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "18 pages of searchable text, 6 tables (7,965 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 56 of 56 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision L, 12 April 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Footnote 1/ leaves the length of the insulating sleeve over the basic case to MIL-PRF-39006, so this sheet does not give how far the sleeve runs past each end of the case; the solids end it flush with the case."
   ]
  },
  {
   "id": "MIL-PRF-39007/11J w/Amendment 3",
   "slug": "mil-prf-39007-11j-w-amendment-3",
   "title": "Resistor, fixed, wirewound (power type), nonestablished reliability, established reliability, and space level, style RWR89",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-39007_11J w_Amendment 3 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 2,
   "dimensions": 22,
   "dimensions_met": 22,
   "kind": "Performance specification sheet",
   "dated": "3 August 2022",
   "status": "Active, 3 August 2022",
   "newest": "Revision J Amendment 3 (all previous amendments incorporated), 3 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-39007_11J w_Amendment 3 package.pdf",
    "scan": "MIL-PRF-39007_11J w_Amendment 3 legacy scan.pdf",
    "clean": "MIL-PRF-39007_11J w_Amendment 3 clean copy.pdf",
    "record": "MIL-PRF-39007_11J w_Amendment 3 validation record.pdf",
    "sheet": "MIL-PRF-39007_11J w_Amendment 3 3D model.pdf",
    "parts": "MIL-PRF-39007_11J w_Amendment 3 parts list.pdf",
    "inspection": "MIL-PRF-39007_11J w_Amendment 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/RWR89_note_5-freecad.png",
    "pair": "Models/views/RWR89_note_5-pair.png",
    "record": "Models/views/RWR89_note_5-record.png",
    "front": "Models/views/RWR89_note_5-front.png",
    "top": "Models/views/RWR89_note_5-top.png",
    "right": "Models/views/RWR89_note_5-right.png",
    "cut": "Models/views/RWR89_note_5-cut.png"
   },
   "shown_part": "RWR89 note 5",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style RWR89 resistor at its two lead lengths: a round body .187 in diameter and .560 long with square ends, and a .032 diameter lead on its axis out of each end, 1.500 long for figure 1 and 1.000 long for tape and reel packaging (note 5).",
   "not_modeled": [
    "The inside of the resistor (the wirewound element, its core, the end caps and the coating): each solid is the outside shape as one body.",
    "Any coating meniscus that runs onto each lead up to the clean-lead point of note 3, and any departure of the body from a true cylinder that the figure's essentially cylindrical envelope allows.",
    "Lead finish and winding (the S, W, N and Z letters of the PIN), marking, the maximum weights of 3.8 (3 grams, and 4 grams for N type), and the electrical ratings and tests, none of which the outline shows.",
    "Every coded resistance value, tolerance and product level of the PIN: they share one outline, so each lead length has one solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 05fd7ab97dd5.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,211 of 1,216 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "4 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (41 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 22 of 22 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J Amendment 3 (all previous amendments incorporated), 3 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The inch and millimetre table under figure 1 lists 0.031 inch (0.79 mm), a value that no dimension, tolerance or note of figure 1 uses, and does not list 0.020 inch, the printed tolerance on D, so an engineer should confirm the D tolerance and what the 0.031 entry belongs to."
   ]
  },
  {
   "id": "MIL-PRF-39007/7H w/Amendment 3",
   "slug": "mil-prf-39007-7h-w-amendment-3",
   "title": "Resistor, fixed, wirewound (power type), nonestablished reliability, established reliability, and space level, style RWR78",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-39007_7H w_Amendment 3 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 2,
   "dimensions": 22,
   "dimensions_met": 22,
   "kind": "Performance specification sheet",
   "dated": "3 August 2022",
   "status": "Active, 3 August 2022",
   "newest": "Revision H Amendment 3 (all previous amendments incorporated), 3 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-39007_7H w_Amendment 3 package.pdf",
    "scan": "MIL-PRF-39007_7H w_Amendment 3 legacy scan.pdf",
    "clean": "MIL-PRF-39007_7H w_Amendment 3 clean copy.pdf",
    "record": "MIL-PRF-39007_7H w_Amendment 3 validation record.pdf",
    "sheet": "MIL-PRF-39007_7H w_Amendment 3 3D model.pdf",
    "parts": "MIL-PRF-39007_7H w_Amendment 3 parts list.pdf",
    "inspection": "MIL-PRF-39007_7H w_Amendment 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/RWR78_note_5-freecad.png",
    "pair": "Models/views/RWR78_note_5-pair.png",
    "record": "Models/views/RWR78_note_5-record.png",
    "front": "Models/views/RWR78_note_5-front.png",
    "top": "Models/views/RWR78_note_5-top.png",
    "right": "Models/views/RWR78_note_5-right.png",
    "cut": "Models/views/RWR78_note_5-cut.png"
   },
   "shown_part": "RWR78 note 5",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style RWR78 resistor at its two lead lengths: a round body .375 in diameter and 1.780 long with square ends, and a .040 diameter lead on its axis out of each end, 1.500 long for figure 1 and 1.000 long for tape and reel packaging (note 5).",
   "not_modeled": [
    "The inside of the resistor (the wirewound element, its core, the end caps and the coating): each solid is the outside shape as one body.",
    "Any coating meniscus that runs onto each lead up to the clean-lead point of note 3, and any departure of the body from a true cylinder that the figure's essentially cylindrical envelope allows.",
    "Lead finish and winding (the S, W, N and Z letters of the PIN), marking, the maximum weight of 3.8 (12 grams, 13 grams for N type), and the electrical ratings and tests, none of which the outline shows.",
    "Every coded resistance value, tolerance and product level of the PIN: they share one outline, so each lead length has one solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 818561c6f8e0.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,199 of 1,221 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (31 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 22 of 22 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 3 (all previous amendments incorporated), 3 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-39007/8L w/Amendment 4",
   "slug": "mil-prf-39007-8l-w-amendment-4",
   "title": "Resistor, fixed, wirewound (power type), nonestablished reliability, established reliability, and space level, style RWR80",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-39007_8L w_Amendment 4 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 2,
   "dimensions": 22,
   "dimensions_met": 22,
   "kind": "Performance specification sheet",
   "dated": "3 August 2022",
   "status": "Active, 3 August 2022",
   "newest": "Revision L Amendment 4 (all previous amendments incorporated), 3 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-39007_8L w_Amendment 4 package.pdf",
    "scan": "MIL-PRF-39007_8L w_Amendment 4 legacy scan.pdf",
    "clean": "MIL-PRF-39007_8L w_Amendment 4 clean copy.pdf",
    "record": "MIL-PRF-39007_8L w_Amendment 4 validation record.pdf",
    "sheet": "MIL-PRF-39007_8L w_Amendment 4 3D model.pdf",
    "parts": "MIL-PRF-39007_8L w_Amendment 4 parts list.pdf",
    "inspection": "MIL-PRF-39007_8L w_Amendment 4 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/RWR80_note_5-freecad.png",
    "pair": "Models/views/RWR80_note_5-pair.png",
    "record": "Models/views/RWR80_note_5-record.png",
    "front": "Models/views/RWR80_note_5-front.png",
    "top": "Models/views/RWR80_note_5-top.png",
    "right": "Models/views/RWR80_note_5-right.png",
    "cut": "Models/views/RWR80_note_5-cut.png"
   },
   "shown_part": "RWR80 note 5",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style RWR80 resistor at its two lead lengths: a round body .094 in diameter and .406 long with square ends, and a .0200 diameter lead on its axis out of each end, 1.500 long for figure 1 and 1.000 long for tape and reel packaging (note 5).",
   "not_modeled": [
    "The inside of the resistor (the wirewound element, its core, the end caps and the coating): each solid is the outside shape as one body.",
    "Any coating meniscus that runs onto each lead up to the clean-lead point of note 3, and any departure of the body from a true cylinder that the figure's essentially cylindrical envelope allows.",
    "Lead finish and winding (the S, W, N and Z letters of the PIN), marking, the 1 gram maximum weight of 3.8, and the electrical ratings and tests, none of which the outline shows.",
    "Every coded resistance value, tolerance and product level of the PIN: they share one outline, so each lead length has one solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 28b60e3f19d9.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,229 of 1,239 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (29 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 22 of 22 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision L Amendment 4 (all previous amendments incorporated), 3 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The inch and millimetre table under figure 1 lists 0.062 inch (1.57 mm), a value that no dimension, tolerance or note of figure 1 uses, so either a dimension is missing from the figure or the entry is left from an earlier revision."
   ]
  },
  {
   "id": "MIL-PRF-39007/9J w/ Amendment 3",
   "slug": "mil-prf-39007-9j-w-amendment-3",
   "title": "Resistor, fixed, wirewound (power type), nonestablished reliability, established reliability, and space level, style RWR81",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-39007_9J w_ Amendment 3 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 2,
   "dimensions": 22,
   "dimensions_met": 22,
   "kind": "Performance specification sheet",
   "dated": "3 August 2022",
   "status": "Active, 3 August 2022",
   "newest": "Revision J Amendment 3 (all previous amendments incorporated), 3 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-39007_9J w_ Amendment 3 package.pdf",
    "scan": "MIL-PRF-39007_9J w_ Amendment 3 legacy scan.pdf",
    "clean": "MIL-PRF-39007_9J w_ Amendment 3 clean copy.pdf",
    "record": "MIL-PRF-39007_9J w_ Amendment 3 validation record.pdf",
    "sheet": "MIL-PRF-39007_9J w_ Amendment 3 3D model.pdf",
    "parts": "MIL-PRF-39007_9J w_ Amendment 3 parts list.pdf",
    "inspection": "MIL-PRF-39007_9J w_ Amendment 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 2",
   "pictures": {
    "iso": "Models/views/RWR81_note_5-freecad.png",
    "pair": "Models/views/RWR81_note_5-pair.png",
    "record": "Models/views/RWR81_note_5-record.png",
    "front": "Models/views/RWR81_note_5-front.png",
    "top": "Models/views/RWR81_note_5-top.png",
    "right": "Models/views/RWR81_note_5-right.png",
    "cut": "Models/views/RWR81_note_5-cut.png"
   },
   "shown_part": "RWR81 note 5",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style RWR81 resistor at its two lead lengths: a round body .085 in diameter and .250 long with square ends, and a .0200 diameter lead on its axis out of each end, 1.500 long for figure 1 and 1.000 long for tape and reel packaging (note 5).",
   "not_modeled": [
    "The inside of the resistor (the wirewound element, its core, the end caps and the coating): each solid is the outside shape as one body.",
    "Any coating meniscus that runs onto each lead up to the clean-lead point of note 3, and any departure of the body from a true cylinder that the figure's essentially cylindrical envelope allows.",
    "Lead finish and winding (the S, W, N and Z letters of the PIN), marking, the maximum weight of 3.8 (0.35 gram, 0.70 gram for N type), and the electrical ratings and tests, none of which the outline shows.",
    "Every coded resistance value, tolerance and product level of the PIN: they share one outline, so each lead length has one solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 8d676f0f20cd.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,090 of 1,155 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (29 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 22 of 22 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J Amendment 3 (all previous amendments incorporated), 3 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The inch and millimetre table under figure 1 lists 0.062 inch (1.57 mm), a value that no dimension, tolerance or note of figure 1 uses, so either a dimension is missing from the figure or the entry is left from an earlier revision."
   ]
  },
  {
   "id": "MIL-PRF-39009/2C w/Amendment 3",
   "slug": "mil-prf-39009-2c-w-amendment-3",
   "title": "Resistor, fixed, wirewound, (power type, chassis mounted), nonestablished reliability, and established reliability, styles RER40, RER45, RER50, and RER55",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-39009_2C w_Amendment 3 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 4,
   "dimensions": 88,
   "dimensions_met": 88,
   "kind": "Performance specification sheet",
   "dated": "5 August 2022",
   "status": "Active, 5 August 2022",
   "newest": "Revision C Amendment 3 (all previous amendments incorporated), 5 August 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-39009_2C w_Amendment 3 package.pdf",
    "scan": "MIL-PRF-39009_2C w_Amendment 3 legacy scan.pdf",
    "clean": "MIL-PRF-39009_2C w_Amendment 3 clean copy.pdf",
    "record": "MIL-PRF-39009_2C w_Amendment 3 validation record.pdf",
    "sheet": "MIL-PRF-39009_2C w_Amendment 3 3D model.pdf",
    "parts": "MIL-PRF-39009_2C w_Amendment 3 parts list.pdf",
    "inspection": "MIL-PRF-39009_2C w_Amendment 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/RER50-freecad.png",
    "pair": "Models/views/RER50-pair.png",
    "record": "Models/views/RER50-record.png",
    "front": "Models/views/RER50-front.png",
    "top": "Models/views/RER50-top.png",
    "right": "Models/views/RER50-right.png",
    "cut": "Models/views/RER50-cut.png"
   },
   "shown_part": "RER50",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid per resistor style (RER40, RER45, RER50, RER55), each standing for every PIN of that style: the housing as a rectangular block with two drilled mounting feet at opposite corners of the base and an axial round lead at each end flattened into a drilled lug, all sized from the Figure 1 tables.",
   "not_modeled": [
    "The noninductively wound element, core, potting and materials inside the housing; the body is solid.",
    "The optional configurations of Figure 1: rounded corners on the mounting feet and a rounded or finned housing top (fins permitted).",
    "The circle drawn on the body end around the lead in the end view, which carries no dimension.",
    "The resistance, tolerance and product level codes of the PIN, which do not change the outline.",
    "Weight (table I), power ratings (tables II and III), resistance range (table IV), dielectric withstanding voltage (table V), terminal pull (table VI), the test chassis (table VII) and the derating curves (figure 2)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 0 scanned. SHA-256 4cd1ec9e363f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,291 of 1,331 items agreed. All 26 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "4 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 10 tables (140 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 88 of 88 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Amendment 3 (all previous amendments incorporated), 5 August 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The P column prints its tolerance as \u00b10.005 (0.79), but 0.79 mm is \u00b10.031 in, not \u00b10.005 in; the solids are checked against \u00b10.005 in because note 1 sets inches as the unit and note 2 gives the millimetres for information only.",
    "Model. The side view prints OPTIONAL CONFIGURATION under the left lug with no leader, so the figure does not say whether the flattened lug with hole P is the standard terminal or an option to a plain wire lead; the solids carry the lug on both leads."
   ]
  },
  {
   "id": "MIL-PRF-39010/9C W/AMENDMENT 2",
   "slug": "mil-prf-39010-9c-w-amendment-2",
   "title": "Coils, fixed, radio frequency, molded, microminiature (iron core), established reliability and nonestablished reliability",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-39010_9C W_AMENDMENT 2 Coils, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 34,
   "dimensions": 272,
   "dimensions_met": 272,
   "kind": "Performance specification sheet",
   "dated": "14 December 2022",
   "status": "Active, 14 December 2022",
   "newest": "Revision C Amendment 2 (all previous amendments incorporated), 14 December 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-39010_9C W_AMENDMENT 2 package.pdf",
    "scan": "MIL-PRF-39010_9C W_AMENDMENT 2 legacy scan.pdf",
    "clean": "MIL-PRF-39010_9C W_AMENDMENT 2 clean copy.pdf",
    "record": "MIL-PRF-39010_9C W_AMENDMENT 2 validation record.pdf",
    "sheet": "MIL-PRF-39010_9C W_AMENDMENT 2 3D model.pdf",
    "parts": "MIL-PRF-39010_9C W_AMENDMENT 2 parts list.pdf",
    "inspection": "MIL-PRF-39010_9C W_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39010_09-A5R6-freecad.png",
    "pair": "Models/views/M39010_09-A5R6-pair.png",
    "record": "Models/views/M39010_09-A5R6-record.png",
    "front": "Models/views/M39010_09-A5R6-front.png",
    "top": "Models/views/M39010_09-A5R6-top.png",
    "right": "Models/views/M39010_09-A5R6-right.png",
    "cut": "Models/views/M39010_09-A5R6-cut.png"
   },
   "shown_part": "M39010/09-A5R6",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 34 molded microminiature RF coils M39010/09-A1R1 to -A270, which share the one outline of Figure 1: a cylindrical body .095 in diameter (A) and .250 long (B) with a .0200 diameter (D) axial lead running 1.438 (C) out from the center of each end.",
   "not_modeled": [
    "The coil inside the molded body (iron core, winding and the joint between the leads and the winding), which the sheet does not draw; the body is solid.",
    "The two letters that complete each dash number (inductance tolerance and product level), which are defined in MIL-PRF-39010 and do not change the outline; one solid is built for each Table I dash number.",
    "The 0.01 ounce maximum weight, which needs a material density the sheet does not give.",
    "The electrical and test requirements, which do not change the outline: the Table I inductance, tolerance, Q, test frequency, self-resonant frequency, dc resistance and rated current of each dash number, the Table II limits, the -55\u00b0C to +105\u00b0C operating range, 15\u00b0C temperature rise, 5 pound terminal pull, dielectric withstanding voltage and barometric pressure tests."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 3a9d469a4866.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "606 of 649 items agreed. All 4 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "219 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (324 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "34 solids in STEP AP242. 272 of 272 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision C Amendment 2 (all previous amendments incorporated), 14 December 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, column 'Rated dc current (mA) 2/': 130 then 155. Page 4 prints a clean 130 for A110** and 155 for A120**, but the printed 130 looks wrong for its series: A110** and A120** share the same 2.70 ohm DC resistance, every other pair of rows with equal resistance carries equal current, and 2.70 ohms is rated 155 mA at A7R5** and A8R2**, so 130 (the A100** value) is a point for an engineer."
   ]
  },
  {
   "id": "MIL-PRF-39017/1P w/Amendment 5",
   "slug": "mil-prf-39017-1p-w-amendment-5",
   "title": "Resistor, fixed, film (insulated), nonestablished reliability, and established reliability, style RLR07",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-39017_1P w_Amendment 5 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 2,
   "dimensions": 20,
   "dimensions_met": 20,
   "kind": "Performance specification sheet",
   "dated": "4 December 2024",
   "status": "Active, 4 December 2024",
   "newest": "Revision P Amendment 5 (all previous amendments incorporated), 4 December 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-39017_1P w_Amendment 5 package.pdf",
    "scan": "MIL-PRF-39017_1P w_Amendment 5 legacy scan.pdf",
    "clean": "MIL-PRF-39017_1P w_Amendment 5 clean copy.pdf",
    "record": "MIL-PRF-39017_1P w_Amendment 5 validation record.pdf",
    "sheet": "MIL-PRF-39017_1P w_Amendment 5 3D model.pdf",
    "parts": "MIL-PRF-39017_1P w_Amendment 5 parts list.pdf",
    "inspection": "MIL-PRF-39017_1P w_Amendment 5 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/RLR07_note_5-freecad.png",
    "pair": "Models/views/RLR07_note_5-pair.png",
    "record": "Models/views/RLR07_note_5-record.png",
    "front": "Models/views/RLR07_note_5-front.png",
    "top": "Models/views/RLR07_note_5-top.png",
    "right": "Models/views/RLR07_note_5-right.png",
    "cut": "Models/views/RLR07_note_5-cut.png"
   },
   "shown_part": "RLR07 note 5",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style RLR07 resistor at its two lead lengths: a round body .090 in diameter and .2425 long with square ends, and a .025 diameter lead on its axis out of each end, 1.500 long for figure 1 and 1.000 long for tape and reel packaging (note 5).",
   "not_modeled": [
    "The inside of the resistor (the resistive film, its substrate, the end caps and the insulating coating): each solid is the outside shape as one body.",
    "The coating meniscus that runs onto each lead up to the clean-lead point of note 3, and any rounding of the body ends, which figure 1 does not draw.",
    "The 0.5 gram maximum weight (3.6), marking (3.7), and the electrical ratings and tests, none of which changes the outline.",
    "Every coded resistance value, characteristic, tolerance and failure rate level of the PIN: they share one outline, so each lead length has one solid.",
    "Lead lengths shorter than 1 inch that a contractor may specify for tape and reel packaging in the purchase order (6.2 d)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 13e6ce49f427.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,275 of 1,298 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 4 tables (45 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 20 of 20 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision P Amendment 5 (all previous amendments incorporated), 4 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-39017/2K w/Amendment 5",
   "slug": "mil-prf-39017-2k-w-amendment-5",
   "title": "Resistor, fixed, film (insulated), nonestablished reliability, and established reliability, style RLR20",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-39017_2K w_Amendment 5 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 2,
   "dimensions": 20,
   "dimensions_met": 20,
   "kind": "Performance specification sheet",
   "dated": "4 December 2024",
   "status": "Active, 4 December 2024",
   "newest": "Revision K Amendment 5 (all previous amendments incorporated), 4 December 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-39017_2K w_Amendment 5 package.pdf",
    "scan": "MIL-PRF-39017_2K w_Amendment 5 legacy scan.pdf",
    "clean": "MIL-PRF-39017_2K w_Amendment 5 clean copy.pdf",
    "record": "MIL-PRF-39017_2K w_Amendment 5 validation record.pdf",
    "sheet": "MIL-PRF-39017_2K w_Amendment 5 3D model.pdf",
    "parts": "MIL-PRF-39017_2K w_Amendment 5 parts list.pdf",
    "inspection": "MIL-PRF-39017_2K w_Amendment 5 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/RLR20_note_5-freecad.png",
    "pair": "Models/views/RLR20_note_5-pair.png",
    "record": "Models/views/RLR20_note_5-record.png",
    "front": "Models/views/RLR20_note_5-front.png",
    "top": "Models/views/RLR20_note_5-top.png",
    "right": "Models/views/RLR20_note_5-right.png",
    "cut": "Models/views/RLR20_note_5-cut.png"
   },
   "shown_part": "RLR20 note 5",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style RLR20 resistor at its two lead lengths: a round body .1295 in diameter and .338 long with square ends, and a .032 diameter lead on its axis out of each end, 1.500 long for figure 1 and 1.000 long for tape and reel packaging (note 5).",
   "not_modeled": [
    "The inside of the resistor (the resistive film, its substrate, the end caps and the insulating coating): each solid is the outside shape as one body.",
    "The coating meniscus that runs onto each lead up to the clean-lead point of note 3, and any rounding of the body ends, which figure 1 does not draw.",
    "The 0.75 gram maximum weight (3.6), marking, and the electrical ratings and tests, none of which changes the outline.",
    "Every coded resistance value, characteristic, tolerance and failure rate level of the PIN: they share one outline, so each lead length has one solid.",
    "Lead lengths shorter than 1 inch that a contractor may specify for tape and reel packaging in the purchase order (6.2 d)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 059a334d2776.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,286 of 1,293 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (33 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 20 of 20 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K Amendment 5 (all previous amendments incorporated), 4 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The metric table under figure 1 prints 2.29 mm beside 0.115 in and 37.10 mm beside 1.500 in, but those inch values convert to 2.92 mm and 38.10 mm; note 2 makes the metric values information only, so the solids follow the inch values and the two metric cells need correcting."
   ]
  },
  {
   "id": "MIL-PRF-39017/3H w/Amendment 5",
   "slug": "mil-prf-39017-3h-w-amendment-5",
   "title": "Resistor, fixed, film (insulated), nonestablished reliability, and established reliability, style RLR32",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-39017_3H w_Amendment 5 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 2,
   "dimensions": 20,
   "dimensions_met": 20,
   "kind": "Performance specification sheet",
   "dated": "4 December 2024",
   "status": "Active, 4 December 2024",
   "newest": "Revision H Amendment 5 (all previous amendments incorporated), 4 December 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-39017_3H w_Amendment 5 package.pdf",
    "scan": "MIL-PRF-39017_3H w_Amendment 5 legacy scan.pdf",
    "clean": "MIL-PRF-39017_3H w_Amendment 5 clean copy.pdf",
    "record": "MIL-PRF-39017_3H w_Amendment 5 validation record.pdf",
    "sheet": "MIL-PRF-39017_3H w_Amendment 5 3D model.pdf",
    "parts": "MIL-PRF-39017_3H w_Amendment 5 parts list.pdf",
    "inspection": "MIL-PRF-39017_3H w_Amendment 5 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/RLR32_note_5-freecad.png",
    "pair": "Models/views/RLR32_note_5-pair.png",
    "record": "Models/views/RLR32_note_5-record.png",
    "front": "Models/views/RLR32_note_5-front.png",
    "top": "Models/views/RLR32_note_5-top.png",
    "right": "Models/views/RLR32_note_5-right.png",
    "cut": "Models/views/RLR32_note_5-cut.png"
   },
   "shown_part": "RLR32 note 5",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style RLR32 resistor at its two lead lengths: a round body .190 in diameter and .5565 long with square ends, and a .0365 diameter lead on its axis out of each end, 1.500 long for figure 1 and 1.000 long for tape and reel packaging (note 5).",
   "not_modeled": [
    "The inside of the resistor (the resistive film, its substrate, the end caps and the insulating coating): each solid is the outside shape as one body.",
    "The coating meniscus that runs onto each lead up to the clean-lead point of note 3, and any rounding of the body ends, which figure 1 does not draw.",
    "The 1.5 gram maximum weight (3.6), marking, and the electrical ratings and tests, none of which changes the outline.",
    "Every coded resistance value, characteristic, tolerance and failure rate level of the PIN: they share one outline, so each lead length has one solid.",
    "Lead lengths shorter than 1 inch that a contractor may specify for tape and reel packaging in the purchase order (6.2 d)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 c68a16150bf1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,190 of 1,251 items agreed. All 42 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (33 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 20 of 20 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 5 (all previous amendments incorporated), 4 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-39018/1J",
   "slug": "mil-prf-39018-1j",
   "title": "Capacitor, fixed, electrolytic (aluminum oxide) (polarized), non-established reliability and established reliability, styles CU12 (uninsulated), CU13 (insulated), and CUR13 (insulated)",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-39018_1J Capacitor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 10,
   "solids": 14,
   "dimensions": 154,
   "dimensions_met": 154,
   "kind": "Performance specification sheet",
   "dated": "9 August 2021",
   "status": "Active, 9 August 2021",
   "newest": "Revision J, 9 August 2021",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-39018_1J package.pdf",
    "scan": "MIL-PRF-39018_1J legacy scan.pdf",
    "clean": "MIL-PRF-39018_1J clean copy.pdf",
    "record": "MIL-PRF-39018_1J validation record.pdf",
    "sheet": "MIL-PRF-39018_1J 3D model.pdf",
    "parts": "MIL-PRF-39018_1J parts list.pdf",
    "inspection": "MIL-PRF-39018_1J inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39018_01_case_A3_CU13_and_CUR13-freecad.png",
    "pair": "Models/views/M39018_01_case_A3_CU13_and_CUR13-pair.png",
    "record": "Models/views/M39018_01_case_A3_CU13_and_CUR13-record.png",
    "front": "Models/views/M39018_01_case_A3_CU13_and_CUR13-front.png",
    "top": "Models/views/M39018_01_case_A3_CU13_and_CUR13-top.png",
    "right": "Models/views/M39018_01_case_A3_CU13_and_CUR13-right.png",
    "cut": "Models/views/M39018_01_case_A3_CU13_and_CUR13-cut.png"
   },
   "shown_part": "M39018/01 case A3 CU13 and CUR13",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the styles CU12, CU13 and CUR13 capacitors, one per case size A0 to A6 for the bare CU12 case and one for the insulated CU13 and CUR13 case: a round case of diameter D and length L with square ends, a short boss at each end that projects the most figure 1 allows (.032 at the negative end, .140 at the positive end), and a lead .035 in diameter on the axis out of each end, 1.50 long from the end of the case.",
   "not_modeled": [
    "Every one of the 552 dash numbers of table I (184 CU12, 184 CU13, 184 CUR13, each CUR13 dash number also carrying a failure rate letter M, P, R or S): they share the outline of their case size and insulation, so one solid stands for each case size bare and insulated.",
    "The inside of the capacitor (the aluminum foil element, the electrolyte, the seals and the case wall): each solid is the outside shape as one body.",
    "The insulating sleeve as a separate body, and the epoxy or polymer end coating; the sleeve is merged into the case diameter and the coating into the positive-end projection.",
    "The optional vent, the optional configuration drawn dashed in figure 1 and the rounded weld and seal shapes at the ends of the case, all drawn without dimensions.",
    "Marking, the polarity symbol and the electrical ratings and tests of table I, none of which change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "10 pages, 0 scanned. SHA-256 0c0b1b861201.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "3,626 of 3,831 items agreed. All 200 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "2,830 checks on size series and limits. 309 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 5 tables (2,757 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "14 solids in STEP AP242. 154 of 154 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J, 9 August 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, column 'Esr / +25\u00b0C / \u03a9': 10.17 then 11.05. The page prints both values as agreed, within the 150 V group. The printed 10.17 itself looks wrong for its series: everywhere else in the 150 V group the +25\u00b0C ESR is half the +85\u00b0C ESR, which gives 16.17 for 32.35, and the 200 V 8.2 \u00b5F row prints 16.17 beside 32.35. A point for an engineer.",
    "Printed value to confirm. Table I, column 'Esr / +25\u00b0C / \u03a9': 2.37 then 40.3. The page prints both values as agreed. The 56 \u00b5F row closes the 150 V group and the 3.3 \u00b5F row opens the 200 V group, so the +25\u00b0C ESR restarts high at the smallest capacitance of the next group. Separately, the printed 40.30 is slightly off its row: in the rest of the 200 V group the +25\u00b0C ESR is half the +85\u00b0C ESR, which gives 40.19 for 80.38, the value the 250 V 3.3 \u00b5F row prints beside 80.38. A small point for an engineer.",
    "Printed value to confirm. Table I, row '33': 33 then 5.03. The page prints both values as agreed. Along a row the columns hold different quantities (capacitance in \u00b5F, ESR and impedance in \u03a9, leakage in \u00b5A, ripple current in mA, case size and dash numbers), so no series runs across a row. The printed 5.03 itself looks wrong for its column: in the 50 V group the +25\u00b0C ESR is 0.6 times the +85\u00b0C ESR, which gives 6.03 for 10.05, and the 33 \u00b5F rows at 75 V and 100 V print 6.03 beside 10.05. A point for an engineer.",
    "Printed value to confirm. Table I, row '47': 47 then 4.27. The page prints both values as agreed. Along a row the columns hold different quantities (capacitance in \u00b5F, ESR and impedance in \u03a9, leakage in \u00b5A, ripple current in mA, case size and dash numbers), so no series runs across a row. The printed 4.27 is slightly off its column: in the 75 V group the +25\u00b0C ESR is 0.6 times the +85\u00b0C ESR, which gives 4.23 for 7.05, the value the 47 \u00b5F rows at 50 V and 100 V print beside 7.05. A small point for an engineer.",
    "Model. Figure 1 gives the 1.50 \u00b1.250 lead length on the negative lead only and no length for the positive lead.",
    "Model. Note 4 limits D for CU13 and CUR13 to .008 over the specified bare case diameter but does not say whether that is the table nominal or the bare case as made within its \u00b1.015, so the largest insulated D for cases A1 to A6 is either .383 or .398."
   ]
  },
  {
   "id": "MIL-PRF-39019/5H w/AMENDMENT 1",
   "slug": "mil-prf-39019-5h-w-amendment-1",
   "title": "Circuit breakers, magnetic, low-power, sealed, trip-free three-pole",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-39019_5H w_AMENDMENT 1 Circuit breakers, magnetic",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 220,
   "dimensions": 8470,
   "dimensions_met": 8470,
   "kind": "Performance specification sheet",
   "dated": "5 March 2025",
   "status": "Active, 5 March 2025",
   "newest": "Revision H Amendment 1 (amendment incorporated), 5 March 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-39019_5H w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-39019_5H w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-39019_5H w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-39019_5H w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-39019_5H w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-39019_5H w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-39019_5H w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M39019_05-257-freecad.png",
    "pair": "Models/views/M39019_05-257-pair.png",
    "record": "Models/views/M39019_05-257-record.png",
    "front": "Models/views/M39019_05-257-front.png",
    "top": "Models/views/M39019_05-257-top.png",
    "right": "Models/views/M39019_05-257-right.png",
    "cut": "Models/views/M39019_05-257-cut.png"
   },
   "shown_part": "M39019/05-257",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solids of all 220 M39019/05 part numbers, the 110 dash numbers of Table I in configuration 1 (six solder-lug main terminals) and configuration 2 (S suffix, three insulating blocks over the screw terminals): the 1.562 by 1.937 body, the .610 dia bushing shoulder and .375-32 UNEF-2A bushing with its keyway, the two threaded inserts with .138-32 tapped holes, and the toggle thrown to OFF with its .240 spherical tip.",
   "not_modeled": [
    "Mounting hardware: the hex nut of note 5 (.375-32 UNEF-2B, .093 \u00b1.005 thick, MS25082-20), the internal tooth lockwasher of note 6 (.507/.493 O.D., .392/.382 I.D., .025 \u00b1.005 thick), the on-off plate, the lock ring of note 9 and the panel seal O-ring.",
    "The sealscrews of note 11 (.138-32 UNC-2A x .312) in the threaded inserts; the tapped holes are left open.",
    "Configuration 2's main terminal posts, MS35265-26 screws (.138-32 x .250) and No. 6 lockwashers (note 14), which sit inside the insulating blocks; the blocks are solid envelopes, so the .906 and .250 terminal positions are checked on configuration 1 only.",
    "The solder-lug shape of the configuration 1 terminals (hook and hole), thread forms, the 8\u00b0 to 14\u00b0 ON position of the toggle, marking (note 8) and the circuit diagram numbering (note 10).",
    "The panel mounting detail's panel cutout itself (.391, .140 and .125 \u00b1.005 holes, the .125 locating hole .062 min deep and .325 \u00b1.005 from the bushing center), which is used only to check the breaker's fit.",
    "The Table I electrical ratings, time delay curves, resistance and impedance, the voltage and inrush ratings and the 150 gram reference weight, which do not change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 1 scanned. SHA-256 8610a1b8a145.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,348 of 1,379 items agreed. All 20 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "597 checks on size series and limits. 16 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 3 tables (774 cells), 3 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "220 solids in STEP AP242. 8,470 of 8,470 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 1 (amendment incorporated), 5 March 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Note 13 sets the threaded inserts .005 to .015 above the height of bushing, but Figure 1 gives no height for the .610 dia bushing shoulder the inserts are drawn level with (the whole bushing is .332 to .380 tall, which the inserts do not reach), so the solids take a .060 shoulder and an engineer must supply its height."
   ]
  },
  {
   "id": "MIL-PRF-55182/1R w/Amendment 1",
   "slug": "mil-prf-55182-1r-w-amendment-1",
   "title": "Resistor, fixed, film, nonestablished reliability, established reliability, and space level, style RN*55 1/",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-55182_1R w_Amendment 1 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 2,
   "dimensions": 20,
   "dimensions_met": 20,
   "kind": "Performance specification sheet",
   "dated": "15 August 2024",
   "status": "Active, 15 August 2024",
   "newest": "Revision R Amendment 1 (amendment incorporated), 15 August 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-55182_1R w_Amendment 1 package.pdf",
    "scan": "MIL-PRF-55182_1R w_Amendment 1 legacy scan.pdf",
    "clean": "MIL-PRF-55182_1R w_Amendment 1 clean copy.pdf",
    "record": "MIL-PRF-55182_1R w_Amendment 1 validation record.pdf",
    "sheet": "MIL-PRF-55182_1R w_Amendment 1 3D model.pdf",
    "parts": "MIL-PRF-55182_1R w_Amendment 1 parts list.pdf",
    "inspection": "MIL-PRF-55182_1R w_Amendment 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/RN_55_note_5-freecad.png",
    "pair": "Models/views/RN_55_note_5-pair.png",
    "record": "Models/views/RN_55_note_5-record.png",
    "front": "Models/views/RN_55_note_5-front.png",
    "top": "Models/views/RN_55_note_5-top.png",
    "right": "Models/views/RN_55_note_5-right.png",
    "cut": "Models/views/RN_55_note_5-cut.png"
   },
   "shown_part": "RN*55 note 5",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style RN*55 resistor at its two lead lengths: a round body .109 in diameter and .2425 long with square ends, and a .025 diameter lead on its axis out of each end, 1.500 long for figure 1 and 1.3125 long for new design and tape and reel packaging (note 5).",
   "not_modeled": [
    "The inside of the resistor (the resistive film, its substrate, the end caps and the protective coating): each solid is the outside shape as one body.",
    "The body's own outline inside its envelope, which figure 1 leaves optional, and the coating meniscus that runs onto each lead up to the clean-lead point of note 3.",
    "Lead material and finish (the third letter of the style), marking, and the electrical ratings and tests, none of which changes the outline.",
    "Every coded resistance value, characteristic, tolerance and product level of the PIN: they share one outline, so each lead length has one solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 6c1f275c8d54.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,508 of 1,575 items agreed. All 29 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 1 table (18 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 20 of 20 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision R Amendment 1 (amendment incorporated), 15 August 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Note 5 prints the plus tolerance on the new-design lead length as +0.625 inch and +15.80 mm, but 0.625 inch is 15.875 mm; the solid follows the inch value, which notes 1 and 2 make the governing unit."
   ]
  },
  {
   "id": "MIL-PRF-55182/5N w/Amendment 2",
   "slug": "mil-prf-55182-5n-w-amendment-2",
   "title": "Resistor, fixed, film, nonestablished reliability, established reliability, and space level, style RN*65 1/",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-55182_5N w_Amendment 2 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 2,
   "dimensions": 20,
   "dimensions_met": 20,
   "kind": "Performance specification sheet",
   "dated": "23 February 2026",
   "status": "Active, 23 February 2026",
   "newest": "Revision N Amendment 2 (all previous amendments incorporated), 23 February 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-55182_5N w_Amendment 2 package.pdf",
    "scan": "MIL-PRF-55182_5N w_Amendment 2 legacy scan.pdf",
    "clean": "MIL-PRF-55182_5N w_Amendment 2 clean copy.pdf",
    "record": "MIL-PRF-55182_5N w_Amendment 2 validation record.pdf",
    "sheet": "MIL-PRF-55182_5N w_Amendment 2 3D model.pdf",
    "parts": "MIL-PRF-55182_5N w_Amendment 2 parts list.pdf",
    "inspection": "MIL-PRF-55182_5N w_Amendment 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/RN_65_note_5-freecad.png",
    "pair": "Models/views/RN_65_note_5-pair.png",
    "record": "Models/views/RN_65_note_5-record.png",
    "front": "Models/views/RN_65_note_5-front.png",
    "top": "Models/views/RN_65_note_5-top.png",
    "right": "Models/views/RN_65_note_5-right.png",
    "cut": "Models/views/RN_65_note_5-cut.png"
   },
   "shown_part": "RN*65 note 5",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style RN*65 resistor at its two lead lengths: a round body .229 in diameter and .5935 long with square ends, and a .025 diameter lead on its axis out of each end, 1.500 long for figure 1 and 1.3125 long for new design and tape and reel packaging (note 5).",
   "not_modeled": [
    "The inside of the resistor (the resistive film, its substrate, the end caps and the protective coating): each solid is the outside shape as one body.",
    "The body's own outline inside its envelope, which figure 1 leaves optional, and the coating meniscus that runs onto each lead up to the clean-lead point of note 3.",
    "The optional transparent heat shrinkable sleeving on RNR65 and RNN65 resistors (characteristics C and E) that note 7 says the body diameter was raised from 0.188 +0.062 -0.031 to .188 +.113 -.031 to hold; the document gives the sleeving no dimension of its own, so it is part of the body envelope.",
    "Lead material and finish (the third letter of the style), marking, and the electrical ratings and tests, none of which changes the outline.",
    "Every coded resistance value, characteristic, tolerance and product level of the PIN: they share one outline, so each lead length has one solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 e7b6b9ce9adc.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,650 of 1,720 items agreed. All 11 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "4 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 2 tables (44 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 20 of 20 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision N Amendment 2 (all previous amendments incorporated), 23 February 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Note 5 prints the plus tolerance on the new-design lead length as +0.625 inch and +15.80 mm, but 0.625 inch is 15.875 mm; the solid follows the inch value, which notes 1 and 2 make the governing unit."
   ]
  },
  {
   "id": "MIL-PRF-55182/7N w/Amendment 1",
   "slug": "mil-prf-55182-7n-w-amendment-1",
   "title": "Resistor, fixed, film, nonestablished reliability, established reliability, and space level, style RN*50 1/",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-55182_7N w_Amendment 1 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 5,
   "dimensions": 40,
   "dimensions_met": 40,
   "kind": "Performance specification sheet",
   "dated": "15 August 2024",
   "status": "Active, 15 August 2024",
   "newest": "Revision N Amendment 1 (amendment incorporated), 15 August 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-55182_7N w_Amendment 1 package.pdf",
    "scan": "MIL-PRF-55182_7N w_Amendment 1 legacy scan.pdf",
    "clean": "MIL-PRF-55182_7N w_Amendment 1 clean copy.pdf",
    "record": "MIL-PRF-55182_7N w_Amendment 1 validation record.pdf",
    "sheet": "MIL-PRF-55182_7N w_Amendment 1 3D model.pdf",
    "parts": "MIL-PRF-55182_7N w_Amendment 1 parts list.pdf",
    "inspection": "MIL-PRF-55182_7N w_Amendment 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/RN_50H-freecad.png",
    "pair": "Models/views/RN_50H-pair.png",
    "record": "Models/views/RN_50H-record.png",
    "front": "Models/views/RN_50H-front.png",
    "top": "Models/views/RN_50H-top.png",
    "right": "Models/views/RN_50H-right.png",
    "cut": "Models/views/RN_50H-cut.png"
   },
   "shown_part": "RN*50H",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style RN*50 resistor, one per characteristic: a round body .065 in diameter with square ends, .180 long for characteristics C and E and .150 long for H, J and K, and a .016 diameter lead on its axis out of each end, 1.250 long.",
   "not_modeled": [
    "The inside of the resistor (the resistive film, its substrate, the end caps and the protective coating): each solid is the outside shape as one body.",
    "The body's own outline inside its envelope, which figure 1 leaves optional, and the coating meniscus that runs onto each lead up to the clean-lead point of note 3.",
    "Lead material and finish (the third letter of the style), marking, and the electrical ratings and tests, none of which changes the outline.",
    "Every coded resistance value, tolerance and product level of the PIN: they share their characteristic's outline, so each characteristic has one solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 21f6aea070e2.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,443 of 1,522 items agreed. All 31 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "8 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (44 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "5 solids in STEP AP242. 40 of 40 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision N Amendment 1 (amendment incorporated), 15 August 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-55182/9H w/Amendment 1",
   "slug": "mil-prf-55182-9h-w-amendment-1",
   "title": "Resistor, fixed, film, nonestablished reliability, established reliability, and space level, style RN*90 1/",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-55182_9H w_Amendment 1 Resistor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 6,
   "dimensions": 86,
   "dimensions_met": 86,
   "kind": "Performance specification sheet",
   "dated": "15 August 2024",
   "status": "Active, 15 August 2024",
   "newest": "Revision H Amendment 1 (amendment incorporated), 15 August 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-55182_9H w_Amendment 1 package.pdf",
    "scan": "MIL-PRF-55182_9H w_Amendment 1 legacy scan.pdf",
    "clean": "MIL-PRF-55182_9H w_Amendment 1 clean copy.pdf",
    "record": "MIL-PRF-55182_9H w_Amendment 1 validation record.pdf",
    "sheet": "MIL-PRF-55182_9H w_Amendment 1 3D model.pdf",
    "parts": "MIL-PRF-55182_9H w_Amendment 1 parts list.pdf",
    "inspection": "MIL-PRF-55182_9H w_Amendment 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/RN_90Y-freecad.png",
    "pair": "Models/views/RN_90Y-pair.png",
    "record": "Models/views/RN_90Y-record.png",
    "front": "Models/views/RN_90Y-front.png",
    "top": "Models/views/RN_90Y-top.png",
    "right": "Models/views/RN_90Y-right.png",
    "cut": "Models/views/RN_90Y-cut.png"
   },
   "shown_part": "RN*90Y",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the style RN*90 resistor, one per characteristic: a rectangular body with two .010 standoff feet and two straight leads, .305 by .336 by .1075 with .025 diameter leads .150 apart and 1.375 long for configuration A (Y and Z), .320 by .336 by .120 with leads .200 apart and .875 long for configuration B (T and S), plus Y and Z with the optional .020 by .011 flat leads.",
   "not_modeled": [
    "The inside of the resistor (the resistive film, its substrate, the lead attachments and the coating): each solid is the outside shape as one body.",
    "The resistance measurement point of note 3, .500 \u00b1.125 below the bottom of the standoffs: a test location on the leads, not a feature of the part.",
    "Lead material and finish (the third letter of the style), marking, the electrical ratings and tests, and the metal strap test fixture of figure 2, none of which changes the outline.",
    "Every coded resistance value, tolerance and product level of the PIN: they share their characteristic's outline, so each characteristic has one solid."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 02a4d5767304.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,845 of 2,895 items agreed. All 21 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "The tables hold no size series or paired limits to check.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 6 tables (88 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "6 solids in STEP AP242. 86 of 86 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 1 (amendment incorporated), 15 August 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 draws the optional flat lead (.020 \u00b1.003 by .010 +.004 -.002) beside configuration A only and does not say whether configuration B (characteristics T and S) may use it, so no flat-lead solid was built for T or S.",
    "Model. Figure 1 gives no lead position across the thickness for configuration B (the .050 \u00b1.010 lead-to-face dimension is drawn on configuration A only), so the configuration B leads were placed at mid-thickness."
   ]
  },
  {
   "id": "MIL-PRF-55342/6H",
   "slug": "mil-prf-55342-6h",
   "title": "Resistor, chip, fixed, film, nonestablished reliability, established reliability, space level, style RM0705",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-55342_6H Resistor, chip",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 2,
   "dimensions": 12,
   "dimensions_met": 12,
   "kind": "Performance specification",
   "dated": "30 December 2024",
   "status": "Active, 30 December 2024",
   "newest": "Revision H, 30 December 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-55342_6H package.pdf",
    "scan": "MIL-PRF-55342_6H legacy scan.pdf",
    "clean": "MIL-PRF-55342_6H clean copy.pdf",
    "record": "MIL-PRF-55342_6H validation record.pdf",
    "sheet": "MIL-PRF-55342_6H 3D model.pdf",
    "parts": "MIL-PRF-55342_6H parts list.pdf",
    "inspection": "MIL-PRF-55342_6H inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/MIL-PRF-55342_6_Configuration_B-freecad.png",
    "pair": "Models/views/MIL-PRF-55342_6_Configuration_B-pair.png",
    "record": "Models/views/MIL-PRF-55342_6_Configuration_B-record.png",
    "front": "Models/views/MIL-PRF-55342_6_Configuration_B-front.png",
    "top": "Models/views/MIL-PRF-55342_6_Configuration_B-top.png",
    "right": "Models/views/MIL-PRF-55342_6_Configuration_B-right.png",
    "cut": "Models/views/MIL-PRF-55342_6_Configuration_B-cut.png"
   },
   "shown_part": "MIL-PRF-55342/6 Configuration B",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid per configuration of style RM0705 (Configuration A for termination codes D, T and W, Configuration B for B, C, G and U), each the rectangular chip envelope A long, B wide and C thick with its termination areas marked as separate faces, standing for every PIN of that configuration.",
   "not_modeled": [
    "The thickness and layer build-up of the terminations (base metallization, barrier metal, solder coat, gold, platinum gold, palladium silver) and the resistive element on the chip; the substrate and terminations are one solid body.",
    "How far the Configuration B wraparound terminations reach onto the side faces of the chip, which the figure does not show.",
    "The power rating (150 mW), voltage rating (50 V), resistance range and tolerances (table I) and the other PIN codes (characteristic, resistance, tolerance, product level), none of which change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 c106846c1266.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,216 of 1,266 items agreed. All 3 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "22 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (53 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 12 of 12 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H, 30 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-55342/7F",
   "slug": "mil-prf-55342-7f",
   "title": "Resistor, chip, fixed, film, nonestablished reliability, established reliability, space level, style RM1206",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-55342_7F Resistor, chip",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 2,
   "dimensions": 12,
   "dimensions_met": 12,
   "kind": "Performance specification",
   "dated": "30 December 2024",
   "status": "Active, 30 December 2024",
   "newest": "Revision F, 30 December 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-55342_7F package.pdf",
    "scan": "MIL-PRF-55342_7F legacy scan.pdf",
    "clean": "MIL-PRF-55342_7F clean copy.pdf",
    "record": "MIL-PRF-55342_7F validation record.pdf",
    "sheet": "MIL-PRF-55342_7F 3D model.pdf",
    "parts": "MIL-PRF-55342_7F parts list.pdf",
    "inspection": "MIL-PRF-55342_7F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 3",
   "pictures": {
    "iso": "Models/views/MIL-PRF-55342_7_Configuration_B-freecad.png",
    "pair": "Models/views/MIL-PRF-55342_7_Configuration_B-pair.png",
    "record": "Models/views/MIL-PRF-55342_7_Configuration_B-record.png",
    "front": "Models/views/MIL-PRF-55342_7_Configuration_B-front.png",
    "top": "Models/views/MIL-PRF-55342_7_Configuration_B-top.png",
    "right": "Models/views/MIL-PRF-55342_7_Configuration_B-right.png",
    "cut": "Models/views/MIL-PRF-55342_7_Configuration_B-cut.png"
   },
   "shown_part": "MIL-PRF-55342/7 Configuration B",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid per configuration of style RM1206 (Configuration A for termination codes D, T and W, Configuration B for B, C, G and U), each the rectangular chip envelope A long, B wide and C thick in millimetres with its termination areas marked as separate faces, standing for every PIN of that configuration.",
   "not_modeled": [
    "The thickness and layer build-up of the terminations and the resistive element on the chip; the substrate and terminations are one solid body.",
    "How far the Configuration B wraparound terminations reach onto the side faces of the chip, which the figure does not show.",
    "The power rating (250 mW), voltage rating (100 V), resistance range and tolerances (table I) and the other PIN codes (characteristic, resistance, tolerance, product level), none of which change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 d4faee7a8632.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,275 of 1,275 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "6 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (49 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 12 of 12 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F, 30 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-55681/4J",
   "slug": "mil-prf-55681-4j",
   "title": "Capacitor, chip, multiple layer, fixed, ceramic dielectric, established reliability and non-established reliability, styles CDR11, CDR12, CDR13, and CDR14 (high frequency)",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-55681_4J Capacitor, chip",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 4,
   "dimensions": 24,
   "dimensions_met": 24,
   "kind": "Performance specification sheet",
   "dated": "24 March 2025",
   "status": "Active, 24 March 2025",
   "newest": "Revision J, 24 March 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-55681_4J package.pdf",
    "scan": "MIL-PRF-55681_4J legacy scan.pdf",
    "clean": "MIL-PRF-55681_4J clean copy.pdf",
    "record": "MIL-PRF-55681_4J validation record.pdf",
    "sheet": "MIL-PRF-55681_4J 3D model.pdf",
    "parts": "MIL-PRF-55681_4J parts list.pdf",
    "inspection": "MIL-PRF-55681_4J inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/CDR13-freecad.png",
    "pair": "Models/views/CDR13-pair.png",
    "record": "Models/views/CDR13-record.png",
    "front": "Models/views/CDR13-front.png",
    "top": "Models/views/CDR13-top.png",
    "right": "Models/views/CDR13-right.png",
    "cut": "Models/views/CDR13-cut.png"
   },
   "shown_part": "CDR13",
   "application": "FreeCAD 1.1.4",
   "modeled": "One solid per style (CDR11, CDR12, CDR13 and CDR14), each the rectangular chip envelope L long, W wide and T thick with its termination bands marked as separate faces, standing for every PIN of that style in tables I and II.",
   "not_modeled": [
    "The thickness and build-up of the terminations (finish M or N on CDR11 and CDR13; S, U, W, Y or Z on CDR12 and CDR14) and the ceramic dielectric and internal electrode layers; the chip and its terminations are one solid body.",
    "The electrical values of tables I and II (capacitance 0.1 pF to 1,000 pF for CDR11 and CDR12 and to 5,100 pF for CDR13 and CDR14, capacitance tolerance, voltage-temperature limits and rated voltage) and the other PIN symbols, none of which change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 522b84d45a58.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,424 of 1,442 items agreed. All 1 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "246 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "10 pages of searchable text, 4 tables (996 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "4 solids in STEP AP242. 24 of 24 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J, 24 March 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-6106R w/AMENDMENT 1",
   "slug": "mil-prf-6106r-w-amendment-1",
   "title": "Relays, electromagnetic general specification for",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-6106R w_AMENDMENT 1 Relays, electromagnetic general specification fo",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 61,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "11 July 2025",
   "status": "Active, 11 July 2025",
   "newest": "Revision R Amendment 1 (amendment incorporated), 11 July 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-6106R w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-6106R w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-6106R w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-6106R w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "61 pages, 0 scanned. SHA-256 e85ab9e9f8b8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "24,703 of 24,750 items agreed. All 36 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "439 checks on size series and limits. 6 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "62 pages of searchable text, 19 tables (1,423 cells), 14 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-6106 is the general performance specification for electromagnetic relays: it sets electrical, environmental, marking and test requirements and gives mounting-stud and terminal pull and torque by thread size, while each relay outline and its dimensions are in the individual M6106 specification sheets.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision R Amendment 1 (amendment incorporated), 11 July 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-83401/1H w/ Amendment 4",
   "slug": "mil-prf-83401-1h-w-amendment-4",
   "title": "Resistor network, fixed, film, style RZ010, 14 pin dip",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-83401_1H w_ Amendment 4 Resistor network, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 1,
   "dimensions": 15,
   "dimensions_met": 15,
   "kind": "Performance specification sheet",
   "dated": "29 May 2024",
   "status": "Active, 29 May 2024",
   "newest": "Revision H Amendment 4 (all previous amendments incorporated), 29 May 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-83401_1H w_ Amendment 4 package.pdf",
    "scan": "MIL-PRF-83401_1H w_ Amendment 4 legacy scan.pdf",
    "clean": "MIL-PRF-83401_1H w_ Amendment 4 clean copy.pdf",
    "record": "MIL-PRF-83401_1H w_ Amendment 4 validation record.pdf",
    "sheet": "MIL-PRF-83401_1H w_ Amendment 4 3D model.pdf",
    "parts": "MIL-PRF-83401_1H w_ Amendment 4 parts list.pdf",
    "inspection": "MIL-PRF-83401_1H w_ Amendment 4 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 4",
   "pictures": {
    "iso": "Models/views/MIL-PRF-83401_1_RZ010-freecad.png",
    "pair": "Models/views/MIL-PRF-83401_1_RZ010-pair.png",
    "record": "Models/views/MIL-PRF-83401_1_RZ010-record.png",
    "front": "Models/views/MIL-PRF-83401_1_RZ010-front.png",
    "top": "Models/views/MIL-PRF-83401_1_RZ010-top.png",
    "right": "Models/views/MIL-PRF-83401_1_RZ010-right.png",
    "cut": "Models/views/MIL-PRF-83401_1_RZ010-cut.png"
   },
   "shown_part": "MIL-PRF-83401/1 RZ010",
   "application": "FreeCAD 1.1.4",
   "modeled": "One envelope solid of the style RZ010 14 pin dual-in-line resistor network, standing for every M8340101 and C8340101 part number: a rectangular body with 14 leads, 7 along each long side, each lead a flat tab out of the body side, a wide shoulder down to the seating plane and a narrow lead below it, built to the figure 1 dimensions.",
   "not_modeled": [
    "The internal film resistor elements, the schematics A, B and J, the Table I resistance values and the Table II power ratings, which do not change the envelope (note 3 makes figure 1 an envelope).",
    "The pin 1 locator (a dot, notch, stripe or numeral 1 in the shaded area beside pin 1, note 4) and the pin marking on the top surface.",
    "The 0\u00b0 to 15\u00b0 outward lean of the leads that figure 1 draws dashed; the leads are modeled straight down.",
    "The bend radius where each lead turns down and the taper from the wide shoulder to the narrow lead, which figure 1 draws but does not dimension."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 918f833ea39e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,358 of 1,376 items agreed. All 23 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "22 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 4 tables (177 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "1 solid in STEP AP242. 15 of 15 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 4 (all previous amendments incorporated), 29 May 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 allows the leads to lean out 0\u00b0 to 15\u00b0 but limits the spread over the lead tips to .310 to .350; a lead that leans 15\u00b0 from a bend at or above the seating plane, with at least .125 below that plane, moves its tip out .033 or more, so leads .008 thick on a .290 row would spread at least .365 over the tips. The engineer must decide whether the angle or the .350 spread governs, and at what height the .300 row spacing is measured."
   ]
  },
  {
   "id": "MIL-PRF-83401/2H w/ Amendment 4",
   "slug": "mil-prf-83401-2h-w-amendment-4",
   "title": "Resistor network, fixed, film, style RZ020, 16 pin dip",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-83401_2H w_ Amendment 4 Resistor network, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 1,
   "dimensions": 15,
   "dimensions_met": 15,
   "kind": "Performance specification sheet",
   "dated": "29 May 2024",
   "status": "Active, 29 May 2024",
   "newest": "Revision H Amendment 4 (all previous amendments incorporated), 29 May 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-83401_2H w_ Amendment 4 package.pdf",
    "scan": "MIL-PRF-83401_2H w_ Amendment 4 legacy scan.pdf",
    "clean": "MIL-PRF-83401_2H w_ Amendment 4 clean copy.pdf",
    "record": "MIL-PRF-83401_2H w_ Amendment 4 validation record.pdf",
    "sheet": "MIL-PRF-83401_2H w_ Amendment 4 3D model.pdf",
    "parts": "MIL-PRF-83401_2H w_ Amendment 4 parts list.pdf",
    "inspection": "MIL-PRF-83401_2H w_ Amendment 4 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 4",
   "pictures": {
    "iso": "Models/views/MIL-PRF-83401_2_RZ020-freecad.png",
    "pair": "Models/views/MIL-PRF-83401_2_RZ020-pair.png",
    "record": "Models/views/MIL-PRF-83401_2_RZ020-record.png",
    "front": "Models/views/MIL-PRF-83401_2_RZ020-front.png",
    "top": "Models/views/MIL-PRF-83401_2_RZ020-top.png",
    "right": "Models/views/MIL-PRF-83401_2_RZ020-right.png",
    "cut": "Models/views/MIL-PRF-83401_2_RZ020-cut.png"
   },
   "shown_part": "MIL-PRF-83401/2 RZ020",
   "application": "FreeCAD 1.1.4",
   "modeled": "One envelope solid of the style RZ020 16 pin dual-in-line resistor network, standing for every M8340102 and C8340102 part number: a rectangular body with 16 leads, 8 along each long side, each lead a flat tab out of the body side, a wide shoulder down to the seating plane and a narrow lead below it, built to the figure 1 dimensions.",
   "not_modeled": [
    "The internal film resistor elements, the schematics A, B and J, the Table I resistance values and the Table II power ratings, which do not change the envelope (note 3 makes figure 1 an envelope).",
    "The pin 1 locator (a dot, notch, stripe or numeral 1 in the shaded area beside pin 1, note 4) and the pin marking on the top surface.",
    "The 0\u00b0 to 15\u00b0 outward lean of the leads that figure 1 draws dashed; the leads are modeled straight down.",
    "The bend radius where each lead turns down and the taper from the wide shoulder to the narrow lead, which figure 1 draws but does not dimension."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 2f3beac9d3b9.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,340 of 1,353 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "22 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 4 tables (177 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "1 solid in STEP AP242. 15 of 15 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision H Amendment 4 (all previous amendments incorporated), 29 May 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 allows the leads to lean out 0\u00b0 to 15\u00b0 but limits the spread over the lead tips to .310 to .350; a lead that leans 15\u00b0 from a bend at or above the seating plane, with at least .125 below that plane, moves its tip out .033 or more, so leads .008 thick on a .290 row would spread at least .365 over the tips. The engineer must decide whether the angle or the .350 spread governs, and at what height the .300 row spacing is measured."
   ]
  },
  {
   "id": "MIL-PRF-83401/5E w/ Amendment 4",
   "slug": "mil-prf-83401-5e-w-amendment-4",
   "title": "Resistor network, fixed, film style RZ050, 8 pin sip",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-83401_5E w_ Amendment 4 Resistor network, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 3,
   "dimensions": 43,
   "dimensions_met": 43,
   "kind": "Performance specification sheet",
   "dated": "29 May 2024",
   "status": "Active, 29 May 2024",
   "newest": "Revision E Amendment 4 (all previous amendments incorporated), 29 May 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-83401_5E w_ Amendment 4 package.pdf",
    "scan": "MIL-PRF-83401_5E w_ Amendment 4 legacy scan.pdf",
    "clean": "MIL-PRF-83401_5E w_ Amendment 4 clean copy.pdf",
    "record": "MIL-PRF-83401_5E w_ Amendment 4 validation record.pdf",
    "sheet": "MIL-PRF-83401_5E w_ Amendment 4 3D model.pdf",
    "parts": "MIL-PRF-83401_5E w_ Amendment 4 parts list.pdf",
    "inspection": "MIL-PRF-83401_5E w_ Amendment 4 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 4",
   "pictures": {
    "iso": "Models/views/MIL-PRF-83401_5_RZ050_flat_leads_body_standoffs-freecad.png",
    "pair": "Models/views/MIL-PRF-83401_5_RZ050_flat_leads_body_standoffs-pair.png",
    "record": "Models/views/MIL-PRF-83401_5_RZ050_flat_leads_body_standoffs-record.png",
    "front": "Models/views/MIL-PRF-83401_5_RZ050_flat_leads_body_standoffs-front.png",
    "top": "Models/views/MIL-PRF-83401_5_RZ050_flat_leads_body_standoffs-top.png",
    "right": "Models/views/MIL-PRF-83401_5_RZ050_flat_leads_body_standoffs-right.png",
    "cut": "Models/views/MIL-PRF-83401_5_RZ050_flat_leads_body_standoffs-cut.png"
   },
   "shown_part": "MIL-PRF-83401/5 RZ050 flat leads, body standoffs",
   "application": "FreeCAD 1.1.4",
   "modeled": "Three envelope solids of the style RZ050 8 pin single-in-line resistor network, one per lead configuration figure 1 dimensions (round leads with body standoffs, optional flat leads with body standoffs, optional flat leads with the standoff on each lead), each standing for every M8340105 and C8340105 part number: a rectangular body on a seating plane with eight leads in one row.",
   "not_modeled": [
    "The internal film resistor elements, schematics C, G and H, the Table I resistance values, the Table II power ratings and the Table III resistance range, which do not change the envelope (note 4).",
    "The pin 1 locator (dot, notch, stripe or numeral 1 in the shaded area, note 7), marking, and the bevel that note 7 allows on the top edge.",
    "Body standoffs beyond the two drawn, which note 8 allows as an option."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 80d5912f8539.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,463 of 1,475 items agreed. All 8 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "14 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 4 tables (171 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "3 solids in STEP AP242. 43 of 43 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 4 (all previous amendments incorporated), 29 May 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The inch to millimetre table under figure 1 has no entry for the drawing's .783 body length, .342 height or .050 shoulder and lists 0.583 (14.81 mm) and 0.187 (4.76 mm), which figure 1 does not print; .583 cannot be the body length, since eight leads at .100 with .025 minimum end distances span .750, so the solids use .783 and the table needs correcting."
   ]
  },
  {
   "id": "MIL-PRF-83401/8E w/ Amendment 4",
   "slug": "mil-prf-83401-8e-w-amendment-4",
   "title": "Resistor network, fixed, film style RZ080, 8 pin sip",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-83401_8E w_ Amendment 4 Resistor network, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 3,
   "dimensions": 43,
   "dimensions_met": 43,
   "kind": "Performance specification sheet",
   "dated": "29 May 2024",
   "status": "Active, 29 May 2024",
   "newest": "Revision E Amendment 4 (all previous amendments incorporated), 29 May 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-83401_8E w_ Amendment 4 package.pdf",
    "scan": "MIL-PRF-83401_8E w_ Amendment 4 legacy scan.pdf",
    "clean": "MIL-PRF-83401_8E w_ Amendment 4 clean copy.pdf",
    "record": "MIL-PRF-83401_8E w_ Amendment 4 validation record.pdf",
    "sheet": "MIL-PRF-83401_8E w_ Amendment 4 3D model.pdf",
    "parts": "MIL-PRF-83401_8E w_ Amendment 4 parts list.pdf",
    "inspection": "MIL-PRF-83401_8E w_ Amendment 4 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 4",
   "pictures": {
    "iso": "Models/views/MIL-PRF-83401_8_RZ080_flat_leads_body_standoffs-freecad.png",
    "pair": "Models/views/MIL-PRF-83401_8_RZ080_flat_leads_body_standoffs-pair.png",
    "record": "Models/views/MIL-PRF-83401_8_RZ080_flat_leads_body_standoffs-record.png",
    "front": "Models/views/MIL-PRF-83401_8_RZ080_flat_leads_body_standoffs-front.png",
    "top": "Models/views/MIL-PRF-83401_8_RZ080_flat_leads_body_standoffs-top.png",
    "right": "Models/views/MIL-PRF-83401_8_RZ080_flat_leads_body_standoffs-right.png",
    "cut": "Models/views/MIL-PRF-83401_8_RZ080_flat_leads_body_standoffs-cut.png"
   },
   "shown_part": "MIL-PRF-83401/8 RZ080 flat leads, body standoffs",
   "application": "FreeCAD 1.1.4",
   "modeled": "Three envelope solids of the style RZ080 8 pin single-in-line resistor network, one per figure 1 lead configuration (round leads with body standoffs as drawn, optional flat leads with body standoffs, optional flat leads with the standoff on each lead), each standing for every M8340108 and C8340108 part number: a rectangular body on a seating plane with eight leads in one row.",
   "not_modeled": [
    "The internal film resistor elements, schematics C, G and H, and the table I resistance values, table II power ratings and table III resistance range, which do not change the envelope (note 4).",
    "The pin 1 locator (dot, notch, stripe or numeral 1 in the shaded area), marking, and the bevel that note 7 allows on the top edge.",
    "Body standoffs beyond the two drawn, which note 8 allows as an option, and outline deviations inside the envelope that note 4 permits."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 6fcc51155423.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,409 of 1,465 items agreed. All 6 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "22 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 4 tables (169 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "3 solids in STEP AP242. 43 of 43 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 4 (all previous amendments incorporated), 29 May 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-83401/9E w/ Amendment 4",
   "slug": "mil-prf-83401-9e-w-amendment-4",
   "title": "Resistor network, fixed, film, style RZ090, 10 pin sip",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-83401_9E w_ Amendment 4 Resistor network, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 3,
   "dimensions": 73,
   "dimensions_met": 73,
   "kind": "Performance specification sheet",
   "dated": "29 May 2024",
   "status": "Active, 29 May 2024",
   "newest": "Revision E Amendment 4 (all previous amendments incorporated), 29 May 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-83401_9E w_ Amendment 4 package.pdf",
    "scan": "MIL-PRF-83401_9E w_ Amendment 4 legacy scan.pdf",
    "clean": "MIL-PRF-83401_9E w_ Amendment 4 clean copy.pdf",
    "record": "MIL-PRF-83401_9E w_ Amendment 4 validation record.pdf",
    "sheet": "MIL-PRF-83401_9E w_ Amendment 4 3D model.pdf",
    "parts": "MIL-PRF-83401_9E w_ Amendment 4 parts list.pdf",
    "inspection": "MIL-PRF-83401_9E w_ Amendment 4 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 4",
   "pictures": {
    "iso": "Models/views/MIL-PRF-83401_9_RZ090_lead_standoff-freecad.png",
    "pair": "Models/views/MIL-PRF-83401_9_RZ090_lead_standoff-pair.png",
    "record": "Models/views/MIL-PRF-83401_9_RZ090_lead_standoff-record.png",
    "front": "Models/views/MIL-PRF-83401_9_RZ090_lead_standoff-front.png",
    "top": "Models/views/MIL-PRF-83401_9_RZ090_lead_standoff-top.png",
    "right": "Models/views/MIL-PRF-83401_9_RZ090_lead_standoff-right.png",
    "cut": "Models/views/MIL-PRF-83401_9_RZ090_lead_standoff-cut.png"
   },
   "shown_part": "MIL-PRF-83401/9 RZ090 lead standoff",
   "application": "FreeCAD 1.1.4",
   "modeled": "Three solids of the style RZ090 10 pin SIP resistor network envelope of figure 1, one for each lead configuration (round leads with body standoffs as drawn, standoff as part of lead, standoff as part of body with flat leads), each standing for every M8340109 and C8340109 PIN.",
   "not_modeled": [
    "The resistor elements, schematics C, G and H, and the electrical values of tables I to III; the body is a solid envelope.",
    "The pin 1 locator (dot, notch, stripe or numeral in the shaded area), the bevel and other marking on the top edge (note 7).",
    "Additional optional body standoffs beyond the two shown (note 8), and the outline deviations within the envelope that note 4 permits.",
    "The rounded outline of the body standoffs as drawn; the solids carry square blocks.",
    "The metric equivalents in the figure's inch/mm table, which are for information only (note 2)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 0 scanned. SHA-256 bfb8f6986f4e.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,465 of 1,481 items agreed. All 16 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "17 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 4 tables (183 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "3 solids in STEP AP242. 73 of 73 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 4 (all previous amendments incorporated), 29 May 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-83421/1F",
   "slug": "mil-prf-83421-1f",
   "title": "Capacitor, fixed, metallized plastic film dielectric, DC and AC, hermetically sealed in metal cases, established reliability, styles CRH01, CRH02, CRH03, CRH04, CRH05, CRH06, CRH07, CRH08, CRH09, and CRH00",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-83421_1F Capacitor, fixed",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 13,
   "solids": 50,
   "dimensions": 400,
   "dimensions_met": 400,
   "kind": "Performance specification sheet",
   "dated": "17 November 2025",
   "status": "Active, 17 November 2025",
   "newest": "Revision F, 17 November 2025",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-83421_1F package.pdf",
    "scan": "MIL-PRF-83421_1F legacy scan.pdf",
    "clean": "MIL-PRF-83421_1F clean copy.pdf",
    "record": "MIL-PRF-83421_1F validation record.pdf",
    "sheet": "MIL-PRF-83421_1F 3D model.pdf",
    "parts": "MIL-PRF-83421_1F parts list.pdf",
    "inspection": "MIL-PRF-83421_1F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M83421_01_D.400_L.813-freecad.png",
    "pair": "Models/views/M83421_01_D.400_L.813-pair.png",
    "record": "Models/views/M83421_01_D.400_L.813-record.png",
    "front": "Models/views/M83421_01_D.400_L.813-front.png",
    "top": "Models/views/M83421_01_D.400_L.813-top.png",
    "right": "Models/views/M83421_01_D.400_L.813-right.png",
    "cut": "Models/views/M83421_01_D.400_L.813-cut.png"
   },
   "shown_part": "M83421/01 D.400 L.813",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 25 case outlines of Table I, each at the 1.625 minimum lead of figure 1 and at the 1.000 tape and reel lead of note 7: a bare round metal case of length L and diameter D with flat ends, an end seal projecting at each end to the overall length G, and a round lead of the note 1 wire size on the axis out of each end.",
   "not_modeled": [
    "Every one of the 1,680 Table I dash numbers (280 capacitance values across the five voltage groups, each in six capacitance tolerances), in either style of its group, at any FR level and with or without the H random vibration option: they share the outline of their L, D and G, so one solid stands for each outline.",
    "The transparent insulating sleeve of notes 5 and 6 (.005 max thick, extending beyond the capacitor body): the solids are the bare case on which footnote 1/ defines L and D.",
    "The end seals recessed inside each end of the case and their domed faces, and the inside of the capacitor (metallized film winding and hermetic seal): each solid is the outside shape as one body.",
    "Case material, lead composition and finish (W, N or C with finish 32 of MIL-STD-1276), marking, and the electrical ratings and tests, none of which change the outline."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "13 pages, 0 scanned. SHA-256 68791fbb880c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "5,919 of 6,001 items agreed. All 25 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "1,958 checks on size series and limits. 25 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "11 pages of searchable text, 7 tables (4,736 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "50 solids in STEP AP242. 400 of 400 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F, 17 November 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, column 'AC ratings (for sinusoidal operation from -65 to +100\u00b0C) 3/ / 0 to .4 kHz / Current (in A)': 0.005 then 0.001. Page 5 prints .005 in the 0 to .4 kHz current column for CRH04/CRH09 0.0018 uF (dash -019- to -024-), between .001 above and below; the printed value looks wrong for its series: 0.0018 uF at 120 V and 400 Hz draws about .0005 A, and .005 is the 4 kHz current printed in the same row.",
    "Model. Note 5 has the insulating sleeve extend beyond the capacitor body but gives no amount, and figure 1 draws it ending flush with the case ends, so the sleeve length is not defined.",
    "Model. Table I prints G as 1.013 (20.65) on the CRH04 and CRH09 rows .056 to .12 \u00b5F and as 2.075 (40.01) on the CRH03 and CRH08 2.7 \u00b5F row; 1.013 inch is 25.73 mm and 2.075 inch is 52.71 mm, so the metric values are wrong and the solids use the inch values."
   ]
  },
  {
   "id": "MIL-PRF-83726/29K w/AMENDMENT 1",
   "slug": "mil-prf-83726-29k-w-amendment-1",
   "title": "Relay, hybrid, time delay (on release), class B, type iia, hermetically sealed, dpdt, 10 amperes, fixed time, 0.1 to 500 seconds",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-83726_29K w_AMENDMENT 1 Relay, hybrid",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 2,
   "dimensions": 49,
   "dimensions_met": 49,
   "kind": "Performance specification sheet",
   "dated": "30 August 2024",
   "status": "Active, 30 August 2024",
   "newest": "Revision K Amendment 1 (amendment incorporated), 30 August 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-83726_29K w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-83726_29K w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-83726_29K w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-83726_29K w_AMENDMENT 1 validation record.pdf",
    "sheet": "MIL-PRF-83726_29K w_AMENDMENT 1 3D model.pdf",
    "parts": "MIL-PRF-83726_29K w_AMENDMENT 1 parts list.pdf",
    "inspection": "MIL-PRF-83726_29K w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M83726_29-9002S-freecad.png",
    "pair": "Models/views/M83726_29-9002S-pair.png",
    "record": "Models/views/M83726_29-9002S-record.png",
    "front": "Models/views/M83726_29-9002S-front.png",
    "top": "Models/views/M83726_29-9002S-top.png",
    "right": "Models/views/M83726_29-9002S-right.png",
    "cut": "Models/views/M83726_29-9002S-cut.png"
   },
   "shown_part": "M83726/29-9002S",
   "application": "FreeCAD 1.1.4",
   "modeled": "Outline solids of the time delay relay of Figure 1, one per terminal style: the 1.025 MAX square case 1.010 MAX high, the .040 mounting flanges .156 above the case bottom with three .150 slots over 1.718 MAX, and 14 terminals on the .200 grid, as .310 MAX solder hooks (M83726/29-9002S) or .270 plug-in pins below a .050 gasket (M83726/29-1001P).",
   "not_modeled": [
    "Every other dash number: the four digits give only the time delay (0.1 to 500 seconds in one-decade ranges), so each dash number has the outline of its P or S solid.",
    "The hook shape of the solder terminals, which the figure marks shape optional, and the rounded ends of the plug-in pins.",
    "The upright legs and bends of the mounting brackets against the case sides, the rounded case edges and the rounded flange corners, none of which the figure dimensions.",
    "The name plate, the contrasting bead on one terminal, the circuit diagram marking of note 4 and the ESDS marking.",
    "Note 7 makes terminal C2 optional; both solids carry all 14 terminal positions the figure dimensions.",
    "The mating sockets of MIL-DTL-12883/40, the 2.5 ounce weight limit and the gasket and terminal materials of notes 5 and 6."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 0 scanned. SHA-256 b52658601150.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,009 of 1,026 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "32 checks on size series and limits. 1 break checked against the scan: it is as printed. A later review settled 1 printed value from the document's own conversions.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "6 pages of searchable text, 2 tables (56 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "2 solids in STEP AP242. 49 of 49 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K Amendment 1 (amendment incorporated), 30 August 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-PRF-85285F w/AMENDMENT 1",
   "slug": "mil-prf-85285f-w-amendment-1",
   "title": "Topcoat, aircraft and support equipment",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-PRF-85285F w_AMENDMENT 1 Topcoat, aircraft and support equipment",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 25,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Performance specification",
   "dated": "10 December 2024",
   "status": "Active, 10 December 2024",
   "newest": "Revision F Amendment 1 (amendment incorporated), 10 December 2024",
   "superseding": "",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-PRF-85285F w_AMENDMENT 1 package.pdf",
    "scan": "MIL-PRF-85285F w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MIL-PRF-85285F w_AMENDMENT 1 clean copy.pdf",
    "record": "MIL-PRF-85285F w_AMENDMENT 1 validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "25 pages, 0 scanned. SHA-256 92ad112e83ec.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "8,842 of 8,879 items agreed. All 18 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "20 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "21 pages of searchable text, 10 tables (387 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MIL-PRF-85285 is a performance specification for a liquid topcoat for aircraft and support equipment, furnished in one-, two- or three-component kits, that defines types, classes, kit sizes, VOHAP limits, viscosity, gloss, colors and test methods; its only dimensions are test-method values, the X-scribe adhesion pattern of Figure 1 and the aluminum test panel sizes of Table V, so it fixes no part shape to model.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F Amendment 1 (amendment incorporated), 10 December 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MIL-R-24243/1E",
   "slug": "mil-r-24243-1e",
   "title": "Rivets, blind, nonstructural, retained mandrel, open end, domed head, aluminum alloy, carbon steel, corrosion resistant steel",
   "class": "Other platforms",
   "folder": "Other platforms/MIL-R-24243_1E Rivets, blind",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 124,
   "dimensions": 992,
   "dimensions_met": 992,
   "kind": "Military specification sheet",
   "dated": "22 June 1994",
   "status": "Active, 14 June 2023",
   "newest": "Revision E Notice 4 - Validation, 14 June 2023",
   "superseding": "",
   "preparing_activity": "Ground Vehicle Systems Center",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MIL-R-24243_1E package.pdf",
    "scan": "MIL-R-24243_1E legacy scan.pdf",
    "clean": "MIL-R-24243_1E clean copy.pdf",
    "record": "MIL-R-24243_1E validation record.pdf",
    "sheet": "MIL-R-24243_1E 3D model.pdf",
    "parts": "MIL-R-24243_1E parts list.pdf",
    "inspection": "MIL-R-24243_1E inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/M24243_1A504-freecad.png",
    "pair": "Models/views/M24243_1A504-pair.png",
    "record": "Models/views/M24243_1A504-record.png",
    "front": "Models/views/M24243_1A504-front.png",
    "top": "Models/views/M24243_1A504-top.png",
    "right": "Models/views/M24243_1A504-right.png",
    "cut": "Models/views/M24243_1A504-cut.png"
   },
   "shown_part": "M24243/1A504",
   "application": "FreeCAD 1.1.4",
   "modeled": "Blind rivet assemblies, one solid for each of the 124 part numbers in Table III: body of diameter D and length L with radius R under a domed head of diameter H and height E, the mandrel stem of wire diameter W projecting P beyond the head, and the mandrel head ending at F below the head underside, body and mandrel joined as one solid.",
   "not_modeled": [
    "The body bore, the mandrel's break groove and the fit between mandrel and body, which the sheet does not dimension.",
    "The collar form of the mandrel head and the pointed end of the mandrel stem drawn in Figure 1, which carry no dimensions.",
    "GRIP and the recommended grip range of Table III, and the recommended hole size of Table II, which describe the joint, not the rivet.",
    "Materials of Table I, finish, marking and the performance and installed-strength requirements of MIL-R-24243."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, all scanned. SHA-256 2ad92df7274c.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "432 of 529 items agreed. All 7 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "36 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (301 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "124 solids in STEP AP242. 992 of 992 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 4 - Validation, 14 June 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table III prints L for dash number 506 as .530-.550, a .020 band, where every other .156 diameter dash number has a .030 band and the .0625 grip step from dash 504 (.395-.425) gives .520-.550; the solid uses the printed band."
   ]
  },
  {
   "id": "MS16624E",
   "slug": "ms16624e",
   "title": "Ring, retaining, external, basic (tapered section type)",
   "class": "Other platforms",
   "folder": "Other platforms/MS16624E Ring, retaining",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 12,
   "solids": 98,
   "dimensions": 490,
   "dimensions_met": 490,
   "kind": "Detail specification sheet",
   "dated": "21 July 2022",
   "status": "Active, 21 July 2022",
   "newest": "Revision E, 21 July 2022",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS16624E package.pdf",
    "scan": "MS16624E legacy scan.pdf",
    "clean": "MS16624E clean copy.pdf",
    "record": "MS16624E validation record.pdf",
    "sheet": "MS16624E 3D model.pdf",
    "parts": "MS16624E parts list.pdf",
    "inspection": "MS16624E inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS16624-6200-freecad.png",
    "pair": "Models/views/MS16624-6200-pair.png",
    "record": "Models/views/MS16624-6200-record.png",
    "front": "Models/views/MS16624-6200-front.png",
    "top": "Models/views/MS16624-6200-top.png",
    "right": "Models/views/MS16624-6200-right.png",
    "cut": "Models/views/MS16624-6200-cut.png"
   },
   "shown_part": "MS16624-6200",
   "application": "FreeCAD 1.1.4",
   "modeled": "Free-state solids of the MS16624 tapered-section external retaining ring, one for each of the 98 shaft sizes in Table I (.125 to 10.00), each built as its carbon steel zinc/hex-free passivate dash number from Table III (MS16624-6012 to MS16624-7000).",
   "not_modeled": [
    "Table III defines 566 dash numbers (carbon steel cadmium, zinc, phosphate and zinc/hex-free finishes, CRES, beryllium copper and cadmium-plated beryllium copper) plus the inactive and substitute numbers of Tables IV and V; only the zinc/hex-free passivate number of each size is built, since all dash numbers of a size share the Table I dimensions apart from the note 1/ thickness allowance for CRES and plated rings.",
    "The lug hole, whose diameter is given in procurement specification MIL-DTL-21248.",
    "The alternate lug designs drawn for sizes .125 thru .236 (slotted lugs) and 4.250 and over; every size is built with the standard lug outline.",
    "The shaft diameter \u00d8S, recommended groove diameter \u00d8G and width W, groove bottom radii, the 90\u00b0\u00b11\u00b0 groove wall, the ring's sprung diameter \u00d8C and seated diameter \u00d8K, and the retained part's corner radius R and chamfer CH, which dimension the installation rather than the free ring.",
    "Material, hardness (Table II), protective finish and coating thickness, and the load, speed and impact values of the notes and Tables VI and VII."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, 0 scanned. SHA-256 53fe3d1bac28.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,496 of 4,533 items agreed. All 24 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "2,873 checks on size series and limits. 47 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "12 pages of searchable text, 7 tables (3,351 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "98 solids in STEP AP242. 490 of 490 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E, 21 July 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Printed value to confirm. Table I, column 'B lug height / Basic': 0.608 then 0.53. Page 4 prints .530 clearly at 7.000, but the column rises .561, .586, .608 and then .676 at 7.500, so .530 looks wrong for its series (about .630 would fit); a point for an engineer.",
    "Model. The document does not dimension the gap between the lugs, the lug width or the lug outline, so these are assumed in every solid and need a manufacturer's drawing or MIL-DTL-21248 to settle."
   ]
  },
  {
   "id": "MS16625F",
   "slug": "ms16625f",
   "title": "Ring, retaining, internal, basic (tapered section type)",
   "class": "Other platforms",
   "folder": "Other platforms/MS16625F Ring, retaining",
   "result": "Needs attention before review",
   "ready": false,
   "pages": 12,
   "solids": 95,
   "dimensions": 684,
   "dimensions_met": 684,
   "kind": "Detail specification sheet",
   "dated": "21 July 2022",
   "status": "Active, 21 July 2022",
   "newest": "Revision F, 21 July 2022",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS16625F package.pdf",
    "scan": "MS16625F legacy scan.pdf",
    "clean": "MS16625F clean copy.pdf",
    "record": "MS16625F validation record.pdf",
    "sheet": "MS16625F 3D model.pdf",
    "parts": "MS16625F parts list.pdf",
    "inspection": "MS16625F inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS16625-6262-freecad.png",
    "pair": "Models/views/MS16625-6262-pair.png",
    "record": "Models/views/MS16625-6262-record.png",
    "front": "Models/views/MS16625-6262-front.png",
    "top": "Models/views/MS16625-6262-top.png",
    "right": "Models/views/MS16625-6262-right.png",
    "cut": "Models/views/MS16625-6262-cut.png"
   },
   "shown_part": "MS16625-6262",
   "application": "FreeCAD 1.1.4",
   "modeled": "95 flat tapered-section internal retaining ring solids, one for each ring of Table I (109 housing diameters from .250 to 10.000, with paired inch and metric housings sharing one ring), each with the free diameter, tapered section, lugs and thickness of Figure 1 and named by its steel zinc plated, hex free passivate dash number.",
   "not_modeled": [
    "The other part numbers of each size: Table III lists 506 dash numbers across six materials and finishes and Table IV 96 inactive steel numbers, more than 400 in all, and the sheet gives one set of ring dimensions per size, so each size is built once under its steel zinc plated, hex free passivate number.",
    "Lug holes and the exact lug outline, including the alternate lug design for sizes 2.047 and over: the sheet gives no hole size or position and no lug outline beyond B (MIL-DTL-21248 holds the supplementary dimensions).",
    "The housing and groove (H, G with its TIR, W, the 90\u00b0 \u00b11\u00b0 groove wall and the .006 and .010 maximum groove bottom radii), the installed-state reference dimensions K and C, and the corner radius R and chamfer CH allowed on the retained part.",
    "Plating and coating thickness, material, hardness (Table II) and the load capacities of the notes and Table V."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "12 pages, 0 scanned. SHA-256 9c95ea184527.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "4,824 of 5,018 items agreed. 173 differences went to a third reader. 1 reading remains open.",
     "result": "1 open",
     "met": false
    },
    {
     "name": "Table rules.",
     "text": "2,766 checks on size series and limits. 32 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "17 pages of searchable text, 5 tables (3,446 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "95 solids in STEP AP242. 684 of 684 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision F, 21 July 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Open reading. Table I, column B / TOL., rows .250 to 1.500 (page 2): read as \u00b1.003 for .250 to .453; \u00b1.005 for .500 to 1.500, could be \u00b1.003 running further down, to .688 or .750, before \u00b1.005 begins.",
    "Printed value to confirm. Table III, column '1/ 2/ steel zinc plated / Dash no.': -2175 then -2161. Page 6 prints -2175 then -2161, -2165, -2167. The other columns print -x181, -x185, -x187 here. The printed -2161 looks wrong for its series (expected -2181), and -2165 repeats the 1.653 dash number. This is a point for an engineer.",
    "Printed value to confirm. Table III, column '1/ 2/ steel zinc plated, hex free passivate / Dash no.': -6175 then -6161. Page 6 prints -6175 then -6161, -6165, -6167. The other columns print -x181, -x185, -x187 here. The printed -6161 looks wrong for its series (expected -6181), and -6165 repeats the 1.653 dash number. This is a point for an engineer.",
    "Printed value to confirm. Table IV, column 'Cross reference of part numbers / Substitute / 1/ steel zinc plated, hex free passivate / Dash no.': -6175 then -6161. Page 8 prints -6175 then -6161, -6165, -6167, the same as Table III. The printed -6161 looks wrong for its series (expected -6181), and -6165 repeats the 1.653 dash number. This is a point for an engineer.",
    "Model. The B requirement of sizes .500 to .750 rests on the open B tolerance reading (\u00b1.005 as read, \u00b1.003 possible); the solids are at B basic, which meets either.",
    "Model. Tables III and IV print -6165 for both the 1.653 ring (D 1.835) and the 1.850 ring (D 2.054), so the 1.850 solid is named MS16625-6165 (H 1.850), and the 1.812 and 1.875 solids carry the printed -6161 and -6167.",
    "Model. Table I dimensions a 7.750 housing ring, but Tables III and IV give no dash number for it.",
    "Model. Table IV maps the 2.834 housing to inactive -283 and substitutes -6283 and -3283, which Table III does not list; Table III gives -6281 and -3281 for that housing, shared with 2.813.",
    "Model. The sheet gives no free gap, lug hole or lug outline, so the derived free gap and the hole-free flat-topped lugs must be confirmed against MIL-DTL-21248 before the solids are used for fit or installation tooling."
   ]
  },
  {
   "id": "MS16633E w/AMENDMENT 1",
   "slug": "ms16633e-w-amendment-1",
   "title": "Ring, retaining, external, \u201cE\u201d (reduced section type)",
   "class": "Other platforms",
   "folder": "Other platforms/MS16633E w_AMENDMENT 1 Ring, retaining",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 8,
   "solids": 106,
   "dimensions": 530,
   "dimensions_met": 530,
   "kind": "Detail specification sheet",
   "dated": "9 May 2022",
   "status": "Active, 9 May 2022",
   "newest": "Revision E Amendment 1 (amendment incorporated), 9 May 2022",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS16633E w_AMENDMENT 1 package.pdf",
    "scan": "MS16633E w_AMENDMENT 1 legacy scan.pdf",
    "clean": "MS16633E w_AMENDMENT 1 clean copy.pdf",
    "record": "MS16633E w_AMENDMENT 1 validation record.pdf",
    "sheet": "MS16633E w_AMENDMENT 1 3D model.pdf",
    "parts": "MS16633E w_AMENDMENT 1 parts list.pdf",
    "inspection": "MS16633E w_AMENDMENT 1 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS16633-1031-freecad.png",
    "pair": "Models/views/MS16633-1031-pair.png",
    "record": "Models/views/MS16633-1031-record.png",
    "front": "Models/views/MS16633-1031-front.png",
    "top": "Models/views/MS16633-1031-top.png",
    "right": "Models/views/MS16633-1031-right.png",
    "cut": "Models/views/MS16633-1031-cut.png"
   },
   "shown_part": "MS16633-1031",
   "application": "FreeCAD 1.1.4",
   "modeled": "106 flat reduced-section external \"E\" retaining ring solids, one for every Table III dash number across the 22 shaft sizes from .040 to 1.375 and five materials and finishes, each with the free diameter D, large height E, small section height E1 and thickness T of Table I.",
   "not_modeled": [
    "The 21 inactive carbon steel dash numbers of Table IV (-6 to -137) and the superseded -4: Table IV substitutes the cadmium, zinc and phosphate numbers modeled here.",
    "The prong and lug outline beyond D, E and E1: the sheet gives no prong width, relief shape, lug tip radius or free opening width.",
    "The shaft and groove (S, G with its FIM, W and the groove bottom radii by shaft size) and the corner radius R and chamfer CH allowed on the retained part.",
    "Plating and coating thickness, material, hardness (Table II) and the load, impact and speed limits of the notes and Table V."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "8 pages, 0 scanned. SHA-256 13ee0b18f5d1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,785 of 1,807 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "579 checks on size series and limits. 5 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 5 tables (571 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "106 solids in STEP AP242. 530 of 530 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Amendment 1 (amendment incorporated), 9 May 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Footnote 1/ extends the thickness limit to corrosion resistant steel and plated rings but does not say whether phosphate coated rings (the -3000 series) count as plated; those solids use the unplated limits.",
    "Model. The sheet gives no prong width, relief, lug outline or free opening, so the derived outline must be confirmed against MIL-DTL-21248 before the solids are used for fit or installation tooling."
   ]
  },
  {
   "id": "MS20001P",
   "slug": "ms20001p",
   "title": "Hinge, butt structural, extruded",
   "class": "Other platforms",
   "folder": "Other platforms/MS20001P Hinge, butt structural",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 33,
   "dimensions": 660,
   "dimensions_met": 660,
   "kind": "Detail specification sheet",
   "dated": "21 May 2012",
   "status": "Active, 24 November 2021",
   "newest": "Revision P Notice 2 - Validation, 24 November 2021",
   "superseding": "",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS20001P package.pdf",
    "scan": "MS20001P legacy scan.pdf",
    "clean": "MS20001P clean copy.pdf",
    "record": "MS20001P validation record.pdf",
    "sheet": "MS20001P 3D model.pdf",
    "parts": "MS20001P parts list.pdf",
    "inspection": "MS20001P inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS20001H8-1200-freecad.png",
    "pair": "Models/views/MS20001H8-1200-pair.png",
    "record": "Models/views/MS20001H8-1200-record.png",
    "front": "Models/views/MS20001H8-1200-front.png",
    "top": "Models/views/MS20001H8-1200-top.png",
    "right": "Models/views/MS20001H8-1200-right.png",
    "cut": "Models/views/MS20001H8-1200-cut.png"
   },
   "shown_part": "MS20001H8-1200",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid extruded half hinges, types H, X and Y for each dash number -2 to -16 of Table I at the representative length of 12.00 in: a flat leaf of thickness E running A/2 from the pin centreline, a knuckle of diameter D with the pin hole J, the fillet R between leaf and knuckle, and loops .495 wide separated by .505 spaces in which the leaf is cut back to W at angle M.",
   "not_modeled": [
    "Lengths other than 12.00 in: L is any length in inches and hundredths (note 6f), so each dash number and style is modeled at 12.00 in, the length of the note 7 example MS20001-4-1200; the 72 in preferred stock length (note 5) is not modeled.",
    "Complete hinges (no style letter), which are assemblies of mating half hinges with a CRES hinge pin to SAE-AS20253 (requirement 4); the pin and its reference diameter are not modeled.",
    "The .031 \u00b1.005 corner radius drawn as typical at the loop and space corners; the corners are sharp.",
    "Burr and sharp edge removal (note 2).",
    "Finish codes P and C and material code A, which do not change the geometry; one solid stands for each style and dash number.",
    "Material, anodize or chemical film finish, ink stamp marking and tagging (requirements 1 to 3 and 5)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 3e6ec95c820a.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "787 of 787 items agreed. No differences.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "173 checks on size series and limits. 9 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (177 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "33 solids in STEP AP242. 660 of 660 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision P Notice 2 - Validation, 24 November 2021.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. With loops .495 and spaces .505 repeating every 1.000 in, a type H half hinge at a whole-inch length such as the 9.00 in of the note 7 example can hold K at .188 min only with a full loop at one end and a full tang at the other, which leaves mated H halves touching on one side of every loop (the H solids here are built that way); the sheet does not say how H loops are placed at such lengths."
   ]
  },
  {
   "id": "MS20257D",
   "slug": "ms20257d",
   "title": "Hinge continuous",
   "class": "Other platforms",
   "folder": "Other platforms/MS20257D Hinge continuous",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 2,
   "solids": 36,
   "dimensions": 712,
   "dimensions_met": 712,
   "kind": "Military specification sheet",
   "dated": "22 JUNE 1992",
   "status": "Active, 28 August 2019",
   "newest": "Revision D Notice 1 - Validation, 28 August 2019",
   "superseding": "",
   "preparing_activity": "Naval Air Systems Command",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS20257D package.pdf",
    "scan": "MS20257D legacy scan.pdf",
    "clean": "MS20257D clean copy.pdf",
    "record": "MS20257D validation record.pdf",
    "sheet": "MS20257D 3D model.pdf",
    "parts": "MS20257D parts list.pdf",
    "inspection": "MS20257D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "page 1",
   "pictures": {
    "iso": "Models/views/MS20257YC4-875-freecad.png",
    "pair": "Models/views/MS20257YC4-875-pair.png",
    "record": "Models/views/MS20257YC4-875-record.png",
    "front": "Models/views/MS20257YC4-875-front.png",
    "top": "Models/views/MS20257YC4-875-top.png",
    "right": "Models/views/MS20257YC4-875-right.png",
    "cut": "Models/views/MS20257YC4-875-cut.png"
   },
   "shown_part": "MS20257YC4-875",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid half hinges, types H, X and Y, for each size -1 to -6 in aluminum alloy and in CRES at the representative length of 8.75 in: a flat leaf of thickness B running A/2 from the pin centreline and rolled into loops D long at pitch P round the hole E, with slots of depth S and .031 corner radius between the loops.",
   "not_modeled": [
    "Lengths other than 8.75 in: L is any length in inches and hundredths up to the stock length (note b), so each size and type is modeled at 8.75 in, the length of the note 3 example MS20257HC2-875.",
    "Complete hinges (MS20257-, P and C dash numbers without a type letter), which are two mating half hinges with a hinge pin of the same length to MS20253 (notes a and e); the pin and its reference diameter are not modeled.",
    "Anodized aluminum part numbers (P), which have the same geometry as the unanodized ones; each aluminum solid stands for both.",
    "The impressed marking, .06 in figures no deeper than .010 (figure note), burr and sharp edge removal (note 1), material and finish (requirements 1 and 2)."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "2 pages, all scanned. SHA-256 08eb37a56d6d.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "425 of 558 items agreed. All 53 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "70 checks on size series and limits. 2 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (96 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "36 solids in STEP AP242. 712 of 712 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 28 August 2019.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Note (b) requires both ends equal within .020, but a type H half hinge ends in a tang at one end and a loop at the other, and for size -6 (loop 1.990 at pitch 4.047) the tang is always .037 longer than the loop when two H halves mate with equal clearance; the solids apply the .020 to the end loops of the complete hinge, and the sheet does not say which ends it compares on a half hinge."
   ]
  },
  {
   "id": "MS27473N w/AMENDMENT 3",
   "slug": "ms27473n-w-amendment-3",
   "title": "Connectors, plug, electrical, straight, crimp type, bayonet coupling, series II",
   "class": "Other platforms",
   "folder": "Other platforms/MS27473N w_AMENDMENT 3 Connectors, plug",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 27,
   "dimensions": 342,
   "dimensions_met": 342,
   "kind": "Detail specification sheet",
   "dated": "10 September 2024",
   "status": "Active, 10 September 2024",
   "newest": "Revision N Amendment 3 (all previous amendments incorporated), 10 September 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS27473N w_AMENDMENT 3 package.pdf",
    "scan": "MS27473N w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MS27473N w_AMENDMENT 3 clean copy.pdf",
    "record": "MS27473N w_AMENDMENT 3 validation record.pdf",
    "sheet": "MS27473N w_AMENDMENT 3 3D model.pdf",
    "parts": "MS27473N w_AMENDMENT 3 parts list.pdf",
    "inspection": "MS27473N w_AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS27473P24-freecad.png",
    "pair": "Models/views/MS27473P24-pair.png",
    "record": "Models/views/MS27473P24-record.png",
    "front": "Models/views/MS27473P24-front.png",
    "top": "Models/views/MS27473P24-top.png",
    "right": "Models/views/MS27473P24-right.png",
    "cut": "Models/views/MS27473P24-cut.png"
   },
   "shown_part": "MS27473P24",
   "application": "FreeCAD 1.1.4",
   "modeled": "27 envelope solids, one per class E, P and T at each shell size 8 to 24: the shell nose at the MIL-DTL-38999 W diameter ahead of the .036 step and at V over the keys behind it, with the open bore of detail B through the X bore to the pin insert face; the coupling ring and shell body at Q max over W; and the rear end to L max for the class, at XE max over the class E nut, YP max over the class P potting form, and for class T at the VV thread with the projections at HH dia.",
   "not_modeled": [
    "The .391 max distance from the shell shoulder to the rear end of the contacts (style P view), which needs the inserts and contacts.",
    "The front and rear end configuration that figure 1 refers to the procurement specification: the inserts, contacts, bayonet grooves, grommets, the shape of the class E compression nut (SAE-AS85049/27 configuration S) and of the class P potting form (SAE-AS85049/58 and /75) inside their MIL-DTL-38999 diameters, the tooth form of the class T projections and the 45 degree chamfer to the thread root.",
    "The five keys as separate features, their widths and main key positions (MIL-DTL-38999 figure 5), the coupling ring bore and bayonet groove dimensions (MIL-DTL-38999 figure 2 T, U, CC and BB), and the insert arrangements, which are in MIL-STD-1560.",
    "The standard shell front of the main views, which has a straight bore; the solids carry the alternate shell design of detail B, the only view that dimensions R and the 15 degree lead-in.",
    "The finish, insert arrangement, contact style (P or S) and polarizing position of the part number, which do not change the figure 1 dimensions; one solid stands for each class and shell size, with the bore open to the style P pin insert face (the style S socket insert face sits .012 to .026 behind the shell front face, MIL-DTL-38999 figure 2 AA less Z).",
    "The gap between the shell and the coupling ring, the optional marking surface, the coupling ring grip ridges, edge breaks and surface finish."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 a8cc15bb805b.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "523 of 583 items agreed. All 30 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "160 checks on size series and limits. 9 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (127 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "27 solids in STEP AP242. 342 of 342 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision N Amendment 3 (all previous amendments incorporated), 10 September 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Neither the sheet nor MIL-DTL-38999 locates the coupling ring front behind the shell front face, the start of the VV thread or the start of the class E compression nut and class P potting form, so the solids take the ring position from figure 1 proportions and carry the rear end diameters from the end of W to L; these must come from the procurement specification before the envelope is used as a space claim.",
    "Model. The inch-to-millimetre table has no entry for 1.026 and 1.104 (L max / Class E) and lists .953 in (24.21 mm), which no dimension on the sheet uses; note 2 makes the metric values information only, so the inch values govern and the metric table needs correction."
   ]
  },
  {
   "id": "MS27484N w/AMENDMENT 3",
   "slug": "ms27484n-w-amendment-3",
   "title": "Connectors, plug, electrical, straight, crimp type, bayonet coupling, EMI, series II",
   "class": "Other platforms",
   "folder": "Other platforms/MS27484N w_AMENDMENT 3 Connectors, plug",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 27,
   "dimensions": 135,
   "dimensions_met": 135,
   "kind": "Detail specification sheet",
   "dated": "29 October 2024",
   "status": "Active, 29 October 2024",
   "newest": "Revision N Amendment 3 (all previous amendments incorporated), 29 October 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS27484N w_AMENDMENT 3 package.pdf",
    "scan": "MS27484N w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MS27484N w_AMENDMENT 3 clean copy.pdf",
    "record": "MS27484N w_AMENDMENT 3 validation record.pdf",
    "sheet": "MS27484N w_AMENDMENT 3 3D model.pdf",
    "parts": "MS27484N w_AMENDMENT 3 parts list.pdf",
    "inspection": "MS27484N w_AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS27484T16-freecad.png",
    "pair": "Models/views/MS27484T16-pair.png",
    "record": "Models/views/MS27484T16-record.png",
    "front": "Models/views/MS27484T16-front.png",
    "top": "Models/views/MS27484T16-top.png",
    "right": "Models/views/MS27484T16-right.png",
    "cut": "Models/views/MS27484T16-cut.png"
   },
   "shown_part": "MS27484T16",
   "application": "FreeCAD 1.1.4",
   "modeled": "27 envelope solids, one per class E, T and P at each shell size 8 to 24: the shell front at MM, a coupling nut cylinder at Q max over length W, and a rear body, overall length L max for the class.",
   "not_modeled": [
    "The front and rear end configuration that figure 1 refers to the procurement specification: the shell bore, inserts, contacts, keys, bayonet grooves, the class E compression nut, the class P potting form and the class T rear end.",
    "The R dia +.005 -.006 bore and its 15 degree lead-in at the shell front, shown only for the alternate shell design in detail BB; the sheet gives no depth for it.",
    "The grounding spring inside the coupling nut: its FF max thickness, the three JJ min cutouts equally spaced at 80 degrees BSC from the centerline, and their .005 DIA position tolerance to datums D and GG (notes 4 and 5).",
    "K max REF (.155 for shell sizes 8 to 18, .109 for 20 to 24), which no view of figure 1 shows; the same values locate the coupling ring bayonet groove in MIL-DTL-38999 figure 2.",
    "The .391 max dimension in the style P section, which runs from inside the shell to the rear end of the contacts.",
    "The interface dimensions, main key and key positions (note 3), given in MIL-DTL-38999, and the insert arrangements, given in MIL-STD-1560.",
    "The finish, insert arrangement, contact style (P or S) and polarizing position of the part number, which do not change Q, W, MM or L; one solid stands for each class and shell size.",
    "The optional marking surface, coupling nut grip ridges, chamfers, edge breaks and surface finish."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 4d47c603fc77.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "646 of 662 items agreed. All 20 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "182 checks on size series and limits. 1 break checked against the scan: it is as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (204 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "27 solids in STEP AP242. 135 of 135 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision N Amendment 3 (all previous amendments incorporated), 29 October 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no diameter for the class E, T or P rear end behind the coupling nut, so the rear body at 1.10 times MM is taken from figure 1 proportions; the rear end sizes must come from the procurement specification before the envelope is used as a space claim."
   ]
  },
  {
   "id": "MS27497P w/AMENDMENT 2",
   "slug": "ms27497p-w-amendment-2",
   "title": "Connectors, receptacle, electrical, back panel, wall mounting flange, crimp type, bayonet coupling, series II",
   "class": "Other platforms",
   "folder": "Other platforms/MS27497P w_AMENDMENT 2 Connectors, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 6,
   "solids": 27,
   "dimensions": 423,
   "dimensions_met": 423,
   "kind": "Detail specification sheet",
   "dated": "29 October 2024",
   "status": "Active, 29 October 2024",
   "newest": "Revision P Amendment 2 (all previous amendments incorporated), 29 October 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS27497P w_AMENDMENT 2 package.pdf",
    "scan": "MS27497P w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MS27497P w_AMENDMENT 2 clean copy.pdf",
    "record": "MS27497P w_AMENDMENT 2 validation record.pdf",
    "sheet": "MS27497P w_AMENDMENT 2 3D model.pdf",
    "parts": "MS27497P w_AMENDMENT 2 parts list.pdf",
    "inspection": "MS27497P w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS27497P24-freecad.png",
    "pair": "Models/views/MS27497P24-pair.png",
    "record": "Models/views/MS27497P24-record.png",
    "front": "Models/views/MS27497P24-front.png",
    "top": "Models/views/MS27497P24-top.png",
    "right": "Models/views/MS27497P24-right.png",
    "cut": "Models/views/MS27497P24-cut.png"
   },
   "shown_part": "MS27497P24",
   "application": "FreeCAD 1.1.4",
   "modeled": "27 envelope solids, one per class E, P and T at each shell size 8 to 24: the front shell at AB with its front chamfer, the step at .322 and the shoulder to the flange at the MIL-DTL-38999 back panel cutout size, the square S flange .058 to .069 thick at .447 from the front face with four T holes on the R square, and the rear end to L from the flange front face at the MIL-DTL-38999 diameter for the class (E-nut, potting form, or VV thread with the class T grommet past it).",
   "not_modeled": [
    "The front and rear end configuration that figure 1 refers to the procurement specification, MIL-DTL-38999: the shell bore, bayonet coupling features, main keyway and keyway positions (note 3), the threads of the class E external rear accessory thread (note 4) and the knurl and form of its SAE-AS85049/27 compression nut, the shape of the class P potting forms of note 7, and the class T NN projections and thread chamfer; the solids carry the rear end only at its largest diameter and are solid throughout.",
    "The inserts of MIL-STD-1560 and the crimp contacts, with the .203 max from the flange front face to the rear end of the style P contacts and the .036 min at the front end of the style S insert.",
    "The shell features set at 120\u00b0 BSC (typical) and 80\u00b0 BSC in the front view, which the sheet does not size.",
    "The flange corners, chamfered or rounded (4 places) with no size given; the solids have square corners.",
    "The datums H and GG of the hole position frame and the gauge feature of note 5; the holes are built at their basic location and checked against the .005 dia zone.",
    "F, the maximum panel thickness including mounting hardware (note 6), which belongs to the panel.",
    "The finish, insert arrangement, contact style (P or S) and polarizing position of the part number, which do not change the dimensioned envelope; one solid stands for each class and shell size.",
    "The marking surface, finish and surface texture."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "6 pages, 1 scanned. SHA-256 f26544340777.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "614 of 654 items agreed. All 28 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "214 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 3 tables (234 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "27 solids in STEP AP242. 423 of 423 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision P Amendment 2 (all previous amendments incorporated), 29 October 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Neither the sheet nor MIL-DTL-38999 gives the diameter of the shoulder between the .322 step and the flange; the solids take the MIL-DTL-38999 figure 11 type D back panel cutout (E dia min, AB max plus .010) as its largest size, and the true size must be confirmed.",
    "Model. MIL-DTL-38999 figure 9 gives the rear end diameters but not their layout behind the flange (where the VV thread starts, and the length of the class E compression nut of SAE-AS85049/27 and of the class P potting forms of SAE-AS85049/58 and /75, which are not in the library), so each class diameter is carried from the flange to L; the layout must be confirmed before the envelope is used as a space claim."
   ]
  },
  {
   "id": "MS27502J w/AMENDMENT 2",
   "slug": "ms27502j-w-amendment-2",
   "title": "Connectors, electrical, circular, cover, protective, receptacle, bayonet coupling, series I",
   "class": "Other platforms",
   "folder": "Other platforms/MS27502J w_AMENDMENT 2 Connectors, electrical",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 45,
   "dimensions": 387,
   "dimensions_met": 387,
   "kind": "Detail specification sheet",
   "dated": "29 October 2024",
   "status": "Active, 29 October 2024",
   "newest": "Revision J Amendment 2 (all previous amendments incorporated), 29 October 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS27502J w_AMENDMENT 2 package.pdf",
    "scan": "MS27502J w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MS27502J w_AMENDMENT 2 clean copy.pdf",
    "record": "MS27502J w_AMENDMENT 2 validation record.pdf",
    "sheet": "MS27502J w_AMENDMENT 2 3D model.pdf",
    "parts": "MS27502J w_AMENDMENT 2 parts list.pdf",
    "inspection": "MS27502J w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS27502_17N-freecad.png",
    "pair": "Models/views/MS27502_17N-pair.png",
    "record": "Models/views/MS27502_17N-record.png",
    "front": "Models/views/MS27502_17N-front.png",
    "top": "Models/views/MS27502_17N-top.png",
    "right": "Models/views/MS27502_17N-right.png",
    "cut": "Models/views/MS27502_17N-cut.png"
   },
   "shown_part": "MS27502 17N",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of the 45 MS27502 protective covers, one per shell size 9 to 25 in style A, style C and style N, each chain style with the standard chain and with the L option 5 inch chain: the cover at A and Q over L, the fastener stand-off and head to LL, a straight chain to the .167 clearance hole (style C) or to the chain-end fastener, throat and ring (style N).",
   "not_modeled": [
    "The front end configuration that figure 1 refers to the procurement specification and the MIL-DTL-38999 interface dimensions: the cover bore, the bayonet slots and their J width (.105 or .138 \u00b1.015) at the coupling ring, and the bayonet pin seats; the solids have no bore.",
    "The silicone or fluorosilicone disk inside the cover.",
    "The flutes or knurl on the coupling ring, the optional marking location, edge breaks and the finish.",
    "The real chain form (bead or link chain), its free rotation on the cover fastener, the domed fastener heads and the swaged clearance hole end; the 45\u00b0 B reference line belongs to the 35 pound and 25 pound load tests, which are not geometry.",
    "The finish letter of the part number, which does not change geometry; one solid stands for every finish."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 e1cb76770c8f.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "642 of 669 items agreed. All 28 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "226 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "5 pages of searchable text, 3 tables (260 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "45 solids in STEP AP242. 387 of 387 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision J Amendment 2 (all previous amendments incorporated), 29 October 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The +.50 -.25 tolerance is printed on the standard chain length column only, so the sheet gives no tolerance for the L option 5 inch chain; the solids build and check it at exactly 5.0."
   ]
  },
  {
   "id": "MS27505G w/AMENDMENT 2",
   "slug": "ms27505g-w-amendment-2",
   "title": "Connectors, receptacle, electrical, back panel, box mounting flange, crimp type, bayonet coupling, series I",
   "class": "Other platforms",
   "folder": "Other platforms/MS27505G w_AMENDMENT 2 Connectors, receptacle",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 5,
   "solids": 9,
   "dimensions": 252,
   "dimensions_met": 252,
   "kind": "Detail specification sheet",
   "dated": "29 October 2024",
   "status": "Active, 29 October 2024",
   "newest": "Revision G Amendment 2 (all previous amendments incorporated), 29 October 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS27505G w_AMENDMENT 2 package.pdf",
    "scan": "MS27505G w_AMENDMENT 2 legacy scan.pdf",
    "clean": "MS27505G w_AMENDMENT 2 clean copy.pdf",
    "record": "MS27505G w_AMENDMENT 2 validation record.pdf",
    "sheet": "MS27505G w_AMENDMENT 2 3D model.pdf",
    "parts": "MS27505G w_AMENDMENT 2 parts list.pdf",
    "inspection": "MS27505G w_AMENDMENT 2 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS27505E17-freecad.png",
    "pair": "Models/views/MS27505E17-pair.png",
    "record": "Models/views/MS27505E17-record.png",
    "front": "Models/views/MS27505E17-front.png",
    "top": "Models/views/MS27505E17-top.png",
    "right": "Models/views/MS27505E17-right.png",
    "cut": "Models/views/MS27505E17-cut.png"
   },
   "shown_part": "MS27505E17",
   "application": "FreeCAD 1.1.4",
   "modeled": "9 envelope solids, one per shell size 9 to 25 of class E: a square flange S by K with chamfered corners and four P holes at R BSC, a front shell at the MIL-DTL-38999 diameter F from the front end, M ahead of the flange front face, with three bayonet projections of diameter L at K from the front end reaching the diameter E, and a rear body at X max diameter ending at L max behind the flange front face.",
   "not_modeled": [
    "The connector front end configuration that figure 1 refers to the procurement specifications: the shell bore, inserts, pin and socket contacts, keys and keyways.",
    "The other interface dimensions and the main keyway and keyway positions (note 3), which are given in MIL-DTL-38999, including the 85 degree BSC angle that locates a feature on the shell front, and the insert arrangements, which are given in MIL-STD-1560.",
    "UU max, from the flange front face to the contact drawn in the broken-out rear body, which needs the inserts and contacts.",
    "The grommet, which may extend up to .06 beyond the rear face of the body; the solid ends at the rear face.",
    "F max, the largest panel thickness including mounting hardware (note 5), which is an installation limit and not a feature of the receptacle.",
    "The finish, insert arrangement, contact style (style P or S) and polarizing position of the part number, which do not change any tabulated dimension; one solid stands for each shell size.",
    "The rear end chamfer drawn on the body, the marking surface and surface finish."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "5 pages, 0 scanned. SHA-256 84f5dc4ec2af.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "456 of 507 items agreed. All 39 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "168 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "4 pages of searchable text, 2 tables (190 cells), 2 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 252 of 252 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Amendment 2 (all previous amendments incorporated), 29 October 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 1 references datum GG in the hole position frame but marks no feature as GG; note 4 gives only its gauge rule, so the datum feature must be confirmed.",
    "Model. The metric table pairs 1.078 in with 26.38 mm, but 1.078 in is 27.38 mm; note 2 makes the metric values information only, so the inch value governs and the metric entry needs correction.",
    "Model. The metric table pairs 1.125 in with 27.58 mm, but 1.125 in is 28.58 mm; note 2 makes the metric values information only, so the inch value governs and the metric entry needs correction."
   ]
  },
  {
   "id": "MS28741K",
   "slug": "ms28741k",
   "title": "Hose assembly, detachable end fitting, medium pressure",
   "class": "Other platforms",
   "folder": "Other platforms/MS28741K Hose assembly, detachable end fitting",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 3,
   "solids": 0,
   "dimensions": 0,
   "dimensions_met": 0,
   "kind": "Detail specification sheet",
   "dated": "15 January 2010",
   "status": "Active, 30 August 2023",
   "newest": "Revision K Notice 2 - Validation, 30 August 2023",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS28741K package.pdf",
    "scan": "MS28741K legacy scan.pdf",
    "clean": "MS28741K clean copy.pdf",
    "record": "MS28741K validation record.pdf"
   },
   "drawing": "",
   "drawing_caption": "",
   "pictures": {},
   "shown_part": "",
   "application": "",
   "modeled": "",
   "not_modeled": [],
   "tests": [
    {
     "name": "Source held.",
     "text": "3 pages, 0 scanned. SHA-256 63ddd43b8f16.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "308 of 311 items agreed. All 5 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "20 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 1 table (33 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "MS28741 is a specification sheet for MIL-DTL-8795 medium-pressure hose assemblies that gives only the overall length L (set by the part number, with the note 3 tolerances) and a reference hose inside diameter for each dash size in table I, and its Figure 1 leaves the hose outside diameter and the end fittings undimensioned, the adapters being MS24587 parts.",
     "result": "Not applicable",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K Notice 2 - Validation, 30 August 2023.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS3476G w/AMENDMENT 3",
   "slug": "ms3476g-w-amendment-3",
   "title": "Connectors, plug, electrical, series 2, crimp type, bayonet coupling, classes A, D, L, T, W and K",
   "class": "Other platforms",
   "folder": "Other platforms/MS3476G w_AMENDMENT 3 Connectors, plug",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 7,
   "solids": 9,
   "dimensions": 63,
   "dimensions_met": 63,
   "kind": "Detail specification sheet",
   "dated": "27 September 2022",
   "status": "Active, 27 September 2022",
   "newest": "Revision G Amendment 3 (all previous amendments incorporated), 27 September 2022",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS3476G w_AMENDMENT 3 package.pdf",
    "scan": "MS3476G w_AMENDMENT 3 legacy scan.pdf",
    "clean": "MS3476G w_AMENDMENT 3 clean copy.pdf",
    "record": "MS3476G w_AMENDMENT 3 validation record.pdf",
    "sheet": "MS3476G w_AMENDMENT 3 3D model.pdf",
    "parts": "MS3476G w_AMENDMENT 3 parts list.pdf",
    "inspection": "MS3476G w_AMENDMENT 3 inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS3476_shell_size_16-freecad.png",
    "pair": "Models/views/MS3476_shell_size_16-pair.png",
    "record": "Models/views/MS3476_shell_size_16-record.png",
    "front": "Models/views/MS3476_shell_size_16-front.png",
    "top": "Models/views/MS3476_shell_size_16-top.png",
    "right": "Models/views/MS3476_shell_size_16-right.png",
    "cut": "Models/views/MS3476_shell_size_16-cut.png"
   },
   "shown_part": "MS3476 shell size 16",
   "application": "FreeCAD 1.1.4",
   "modeled": "9 envelope solids of the MS3476 plug, one per shell size 8 to 24: a shell nose, the coupling ring front portion, the knurled coupling ring body at A max starting .337 to .357 (.399 to .419 for sizes 20 to 24) behind the shell front face, and the shell rear standing .320 min behind the coupling ring to the 1.230 max overall length.",
   "not_modeled": [
    "The shell profile under the coupling ring in Detail T: the shoulder located by S and the undercut (.187 max for sizes 8 to 18, .218 max for 20 to 24), whose diameters the sheet does not give; the space between the shell and the coupling ring is filled.",
    "The insert section: the hard insert, the resilient insert face seal, the .045/.025 (.107/.087) insert face dimension, the .269/.225, .032 and .008 min contact and barrier positions, the raised seal barrier diameters for contact sizes 20, 16 and 12, and the reduced XX diameters of Table I; insert arrangements are in MIL-STD-1669 and intermateability dimensions in MIL-DTL-26482.",
    "The master polarizing key, the keyways and the three coupling teeth 120 degrees apart, 60 degrees from the master key, which the sheet locates but does not size.",
    "The rear accessory thread and the rear end detail that Figure 1 draws behind the 1.230 max rear end line, which no dimension covers.",
    "V, V', V'' and W, the lengths with SAE-AS85049 backshells, which are procured separately (note 4).",
    "The maximum pin and socket weights, since an envelope that is solid throughout does not carry the part's mass.",
    "The class, insert arrangement, contact style (P or S) and insert position of the part number, which do not change any dimension of Figure 1; one solid stands for each shell size.",
    "The knurl (.200 min total length), the blue color band (note 3), the connector identification marking (.210 max), chamfers and surface finish."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "7 pages, 3 scanned. SHA-256 48c702511295.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "619 of 650 items agreed. All 10 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "21 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "7 pages of searchable text, 2 tables (114 cells), 4 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "9 solids in STEP AP242. 63 of 63 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G Amendment 3 (all previous amendments incorporated), 27 September 2022.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The sheet gives no shell diameter ahead of or behind the coupling ring and no length for the rear end detail Figure 1 draws behind the 1.230 max line, so the nose and rear diameters are Figure 1 proportions and the MIL-DTL-26482 interface and rear accessory dimensions must replace them before the envelope is used as a space claim."
   ]
  },
  {
   "id": "MS35489K",
   "slug": "ms35489k",
   "title": "Grommets, synthetic and silicone rubber, hot-oil and coolant resistant",
   "class": "Other platforms",
   "folder": "Other platforms/MS35489K Grommets, synthetic and silicone rubber",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 4,
   "solids": 308,
   "dimensions": 2156,
   "dimensions_met": 2156,
   "kind": "Detail specification sheet",
   "dated": "20 June 2012",
   "status": "Active, 13 August 2024",
   "newest": "Revision K Notice 2 - Validation, 13 August 2024",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS35489K package.pdf",
    "scan": "MS35489K legacy scan.pdf",
    "clean": "MS35489K clean copy.pdf",
    "record": "MS35489K validation record.pdf",
    "sheet": "MS35489K 3D model.pdf",
    "parts": "MS35489K parts list.pdf",
    "inspection": "MS35489K inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS35489-117-freecad.png",
    "pair": "Models/views/MS35489-117-pair.png",
    "record": "Models/views/MS35489-117-record.png",
    "front": "Models/views/MS35489-117-front.png",
    "top": "Models/views/MS35489-117-top.png",
    "right": "Models/views/MS35489-117-right.png",
    "cut": "Models/views/MS35489-117-cut.png"
   },
   "shown_part": "MS35489-117",
   "application": "FreeCAD 1.1.4",
   "modeled": "308 solids, one per MS35489 part number: the 154 Table I dash numbers 1 to 156 (Table I lists no dash 119 or 126) with no code letter (synthetic rubber) and with code X (silicone rubber); material does not change the geometry. Each solid is the figure 1 grommet: two flanges of diameter \u00d8A joined by a groove of diameter \u00d8C and width G on the grommet centerline, overall thickness F, and a through hole \u00d8E.",
   "not_modeled": [
    "The corner rounds figure 1 draws on the outer edges of the flanges, which the sheet does not dimension; the solids have sharp corners.",
    "The split figure 1 shows when required; note 4 says split grommets are no longer procured and solid grommets are split at assembly.",
    "Material, color and the NASM3036 procurement requirements (requirements 1 and 2), and the Table II replacement part numbers, which do not change the shape."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "4 pages, 0 scanned. SHA-256 123b1e5ee0fa.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,363 of 1,364 items agreed. All 1 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "703 checks on size series and limits. 64 breaks checked against the scan: all are as printed. A later review settled 1 printed value from the column's units and limits.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "3 pages of searchable text, 2 tables (979 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "308 solids in STEP AP242. 2,156 of 2,156 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision K Notice 2 - Validation, 13 August 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Table I prints F for the .094 groove dashes 144, 145, 154 and 156 as .250, .468, .312 and .375, where every .125, .188 and .250 entry and the other .094 entries give the .062 F of the same row plus the change in groove width (.220, .220, .407 and .470); the solids use the printed values, which leave dash 145 thicker than the .250 groove dash 139 of its row (.375), so an engineer must confirm these four values."
   ]
  },
  {
   "id": "MS51957G",
   "slug": "ms51957g",
   "title": "Screw, machine, pan head, cross-recessed, corrosion resistant steel, UNC-2A",
   "class": "Other platforms",
   "folder": "Other platforms/MS51957G Screw, machine",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 9,
   "solids": 142,
   "dimensions": 1136,
   "dimensions_met": 1136,
   "kind": "Detail specification sheet",
   "dated": "14 April 2025",
   "status": "Active, 14 April 2025",
   "newest": "Revision G, 14 April 2025",
   "superseding": "",
   "preparing_activity": "DLA Aviation - Richmond",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS51957G package.pdf",
    "scan": "MS51957G legacy scan.pdf",
    "clean": "MS51957G clean copy.pdf",
    "record": "MS51957G validation record.pdf",
    "sheet": "MS51957G 3D model.pdf",
    "parts": "MS51957G parts list.pdf",
    "inspection": "MS51957G inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS51957-67-freecad.png",
    "pair": "Models/views/MS51957-67-pair.png",
    "record": "Models/views/MS51957-67-record.png",
    "front": "Models/views/MS51957-67-front.png",
    "top": "Models/views/MS51957-67-top.png",
    "right": "Models/views/MS51957-67-right.png",
    "cut": "Models/views/MS51957-67-cut.png"
   },
   "shown_part": "MS51957-67",
   "application": "FreeCAD 1.1.4",
   "modeled": "Solid pan head machine screws, one per dash number 1 to 142 of Table I (eight thread sizes .0860-56 to .3750-16, lengths .125 to 3.000), each with a cylindrical head of diameter A and height H rounded to P at the top edge, the fillet R under the head, an unthreaded body \u00d8D1 and a threaded length shown as a plain cylinder at the nominal size \u00d8D.",
   "not_modeled": [
    "The UNC-2A thread form and its major, pitch and minor diameter limits (ASME B1.1) and the thread runout.",
    "The cross recess (NASM9006) and its driver size from Table I; the head is solid.",
    "The domed crown that Figure 1 draws on the pan head, which the sheet does not dimension beyond A, H and P.",
    "The chamfered point that Figure 1 draws at the end of the screw, which the sheet does not dimension.",
    "The raised or depressed \"316\" head marking (requirement 7).",
    "Material, finish, mechanical, magnetic permeability and tensile strength requirements.",
    "Material code S316 and finish code B, which do not change the geometry; one solid stands for each dash number."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "9 pages, 0 scanned. SHA-256 478eda533cd8.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,038 of 2,378 items agreed. All 4 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "622 checks on size series and limits. 20 breaks checked against the scan: all are as printed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "9 pages of searchable text, 2 tables (1,439 cells), 1 figure.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "142 solids in STEP AP242. 1,136 of 1,136 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision G, 14 April 2025.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": []
  },
  {
   "id": "MS8000E",
   "slug": "ms8000e",
   "title": "Hose assembly, polytetrafluoroethylene, reusable fittings, high temperature, medium pressure, flare-to-flare",
   "class": "Other platforms",
   "folder": "Other platforms/MS8000E Hose assembly, polytetrafluoroethylene",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 10,
   "solids": 96,
   "dimensions": 592,
   "dimensions_met": 592,
   "kind": "Detail specification sheet",
   "dated": "14 July 2016",
   "status": "Active, 4 April 2024",
   "newest": "Revision E Notice 1 - Validation, 4 April 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS8000E package.pdf",
    "scan": "MS8000E legacy scan.pdf",
    "clean": "MS8000E clean copy.pdf",
    "record": "MS8000E validation record.pdf",
    "sheet": "MS8000E 3D model.pdf",
    "parts": "MS8000E parts list.pdf",
    "inspection": "MS8000E inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS8000H242E180-freecad.png",
    "pair": "Models/views/MS8000H242E180-pair.png",
    "record": "Models/views/MS8000H242E180-record.png",
    "front": "Models/views/MS8000H242E180-front.png",
    "top": "Models/views/MS8000H242E180-top.png",
    "right": "Models/views/MS8000H242E180-right.png",
    "cut": "Models/views/MS8000H242E180-cut.png"
   },
   "shown_part": "MS8000H242E180",
   "application": "FreeCAD 1.1.4",
   "modeled": "Centerline envelope solids of all twelve styles (class 1 A to F and class 2 G to N) in every size the HCOF tables list, 96 in all, each at the PIN example length of 24.250 in, locating both nipple ends by the assembly length, the hose cut-off factor and the Figure 5 drop heights.",
   "not_modeled": [
    "Other assembly lengths (0 to 99-7/8 in by the PIN), protective sleeve and lock wire hole codes (Table II, Figure 3), and elbow alignments other than 180 degrees: each style and size is built once, at 24.250 in, because the PIN allows far more than 400 part numbers.",
    "The hose OD and wall (MIL-DTL-27267) and the fitting nuts, sockets, nipples, hexes, threads and SAE-AS4395 mating ends (MIL-DTL-27272, MS27053, MS27055, MS27057, MS27059 and MS27060), which this sheet does not dimension.",
    "Materials: class 1 (CRES) and class 2 (aluminum and CRES) assemblies with the same fittings and size have the same HCOF and the same solids.",
    "Assembly length tolerances other than the one for the modeled length."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "10 pages, 0 scanned. SHA-256 929cce096379.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "1,261 of 1,264 items agreed. All 3 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "10 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "8 pages of searchable text, 6 tables (308 cells), 5 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "96 solids in STEP AP242. 592 of 592 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 1 - Validation, 4 April 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The PIN examples print a length of 24.250 inch with the metric equivalent 209.55 mm, but 24.250 inch is 615.95 mm and 209.55 mm is 8.250 inch."
   ]
  },
  {
   "id": "MS8005E",
   "slug": "ms8005e",
   "title": "Hose assembly, polytetrafluoroethylene, permanently attached fittings, high temperature, medium pressure, flare-to-flare",
   "class": "Other platforms",
   "folder": "Other platforms/MS8005E Hose assembly, polytetrafluoroethylene",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 18,
   "solids": 96,
   "dimensions": 1344,
   "dimensions_met": 1334,
   "kind": "Detail specification sheet",
   "dated": "14 July 2016",
   "status": "Active, 4 April 2024",
   "newest": "Revision E Notice 1 - Validation, 4 April 2024",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS8005E package.pdf",
    "scan": "MS8005E legacy scan.pdf",
    "clean": "MS8005E clean copy.pdf",
    "record": "MS8005E validation record.pdf",
    "sheet": "MS8005E 3D model.pdf",
    "parts": "MS8005E parts list.pdf",
    "inspection": "MS8005E inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS8005H242E180-freecad.png",
    "pair": "Models/views/MS8005H242E180-pair.png",
    "record": "Models/views/MS8005H242E180-record.png",
    "front": "Models/views/MS8005H242E180-front.png",
    "top": "Models/views/MS8005H242E180-top.png",
    "right": "Models/views/MS8005H242E180-right.png",
    "cut": "Models/views/MS8005H242E180-cut.png"
   },
   "shown_part": "MS8005H242E180",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of all twelve styles (A to N) in every listed hose size, 96 in all, each at the PIN example length of 24.250 in, with the hose, sockets, hex nuts, elbows, seats and the through passage sized to the figure tables, Table I and Table II.",
   "not_modeled": [
    "Other assembly lengths (0 to 99-7/8 in by the PIN), protective sleeve and lock wire hole codes (Table III), and elbow alignments other than 180 degrees: each style and size is built once, at 24.250 in, because the PIN allows far more than 400 part numbers.",
    "Swivel nut threads (SAE-AS8879), the cone seat that mates SAE-AS4395, the socket taper, crimp rings and ferrules, lock wire holes, protective sleeves and their bands (Figure 13), and the hose wall construction.",
    "Materials: class 1 fittings (CRES) and class 2 fittings (aluminum and CRES) have the same tabulated dimensions and the same solids.",
    "Assembly length tolerances other than the one for the modeled length, and the +/-2 degree alignment tolerance."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "18 pages, 0 scanned. SHA-256 3d22715b67e1.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,502 of 2,524 items agreed. All 11 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "48 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "16 pages of searchable text, 16 tables (1,133 cells), 14 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "96 solids in STEP AP242. 1,334 of 1,344 stated dimensions measure within limits; 10 cannot, because the sheet's own values conflict. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision E Notice 1 - Validation, 4 April 2024.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. Figure 5 (continued, page 6) prints H (min) 1.845 to 5.480 and H (max) .372 to .765, so the minimum exceeds the maximum on all 10 sizes; the H (min) column equals H (max) of the same 90 degree fitting in Figure 3 and the H (max) column repeats A (nom), so the style E solids are built to the printed H (min) and fail the printed H (max) as a source conflict.",
    "Model. The figures do not say which point of a 45 degree elbow reference line 1 or 2 marks; the solids take the point where the elbow axis meets the seat."
   ]
  },
  {
   "id": "MS8006D",
   "slug": "ms8006d",
   "title": "Hose assembly, polytetrafluoroethylene, permanently attached fittings, high temperature, medium pressure, flareless-to-flareless",
   "class": "Other platforms",
   "folder": "Other platforms/MS8006D Hose assembly, polytetrafluoroethylene",
   "result": "Ready for engineering review",
   "ready": true,
   "pages": 20,
   "solids": 96,
   "dimensions": 1392,
   "dimensions_met": 1392,
   "kind": "Detail specification sheet",
   "dated": "14 July 2016",
   "status": "Active, 1 July 2026",
   "newest": "Revision D Notice 1 - Validation, 1 July 2026",
   "superseding": "",
   "preparing_activity": "DLA Weapons Support (Columbus)",
   "stock_numbers": 0,
   "by_class": {},
   "stock_examples": [],
   "files": {
    "package": "MS8006D package.pdf",
    "scan": "MS8006D legacy scan.pdf",
    "clean": "MS8006D clean copy.pdf",
    "record": "MS8006D validation record.pdf",
    "sheet": "MS8006D 3D model.pdf",
    "parts": "MS8006D parts list.pdf",
    "inspection": "MS8006D inspection report.pdf"
   },
   "drawing": "Models/views/drawing-from-scan.png",
   "drawing_caption": "Figure 1, page 1",
   "pictures": {
    "iso": "Models/views/MS8006H242E180-freecad.png",
    "pair": "Models/views/MS8006H242E180-pair.png",
    "record": "Models/views/MS8006H242E180-record.png",
    "front": "Models/views/MS8006H242E180-front.png",
    "top": "Models/views/MS8006H242E180-top.png",
    "right": "Models/views/MS8006H242E180-right.png",
    "cut": "Models/views/MS8006H242E180-cut.png"
   },
   "shown_part": "MS8006H242E180",
   "application": "FreeCAD 1.1.4",
   "modeled": "Envelope solids of all twelve styles (A to N) in every listed hose size, 96 in all, each at the PIN example length of 24.250 in, with the hose, sockets, hex nuts, elbows, seal ends and the through passage sized to the figure tables, Table I and Table III.",
   "not_modeled": [
    "Other assembly lengths (0 to 99-7/8 in by the PIN), protective sleeve and lock wire hole codes (Table II), and elbow alignments other than 180 degrees: each style and size is built once, at 24.250 in, because the PIN allows far more than 400 part numbers.",
    "Swivel nut threads (SAE-AS8879), the MS8000 series seal nose (NAS1760 globe seal or radius ball nose of MIL-DTL-25579/1) that mates the SAE-AS33514 fitting end, the socket taper, crimp rings and ferrules, lock wire holes, protective sleeves and their bands (Figure 13), and the hose wall construction.",
    "Materials: class 1 fittings (CRES) and class 2 fittings (aluminum and CRES) have the same tabulated dimensions and the same solids.",
    "Assembly length tolerances other than the one for the modeled length."
   ],
   "tests": [
    {
     "name": "Source held.",
     "text": "20 pages, 0 scanned. SHA-256 b7376fe78aa2.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Two independent readings.",
     "text": "Two readers on different models transcribed every page from the images alone.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Agreement.",
     "text": "2,742 of 2,812 items agreed. All 29 differences were settled against the page image.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Table rules.",
     "text": "42 checks on size series and limits. None failed.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Clean copy.",
     "text": "17 pages of searchable text, 16 tables (1,111 cells), 14 figures.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Models.",
     "text": "96 solids in STEP AP242. 1,392 of 1,392 stated dimensions measure within limits. Every file opens in FreeCAD 1.1.4 as one valid solid.",
     "result": "Met",
     "met": true
    },
    {
     "name": "Current revision.",
     "text": "ASSIST status: active. Newest entry: Revision D Notice 1 - Validation, 1 July 2026.",
     "result": "Recorded",
     "met": true
    }
   ],
   "points": [
    "Model. The figures do not say which point of a 45 degree elbow reference line 1 or 2 marks; the solids take the point where the elbow axis meets the end of the MS8000 series seal."
   ]
  }
 ]
}